Related
Hello, I have searched the Internet for a Slingplayer app for my Slingbox solo on my Fire TV with no success. I took a chance and sideloaded several APK'S, a lot did not show the video, only sound. I found Slingplayer for tablets 3.4.0 and got it to work, with a little fiddling the quality is not bad (SD) at 2Mps on a wired network. With an Ipad mouse app and an Ipad remote control app It works, I use the Virgin Media Anytime App to change channels. I would like some feedback as to whether or not this is a new discovery or if there is a better APK for the Fire TV out there...... Thanks ....Mark
I had this version loaded on my AFS successfully. However, since I didn;t have Google Play Store, it stopped working after a while since it couldn;t validate my license.
sparkycomuk said:
Hello, I have searched the Internet for a Slingplayer app for my Slingbox solo on my Fire TV with no success. I took a chance and sideloaded several APK'S, a lot did not show the video, only sound. I found Slingplayer for tablets 3.4.0 and got it to work, with a little fiddling the quality is not bad (SD) at 2Mps on a wired network. With an Ipad mouse app and an Ipad remote control app It works, I use the Virgin Media Anytime App to change channels. I would like some feedback as to whether or not this is a new discovery or if there is a better APK for the Fire TV out there...... Thanks ....Mark
Click to expand...
Click to collapse
tekweezle said:
I had this version loaded on my AFS successfully. However, since I didn;t have Google Play Store, it stopped working after a while since it couldn;t validate my license.
Click to expand...
Click to collapse
Thanks for the apk. The error message doesn't seem to occur until I log out eventually and then doesn't let me back in so just uninstall and reinstall and works again. Isn't ideal but its just like having to log in again after each time.
These versions have worked for me thus far on AFS. The first was made for a phone and second for tablet. I use the one for the tablet as looks a little better and for me has a real remote. Only issue with the slingbox remote was the bottom half was off the screen. To bring it up, using the firestick remote, placed the mouse over the slingbox remote and moving the firestick cursor up first, then held down the firestick select button, letting go when reaches desired location. Mouse must be over the remote throughout. Stays in that position until log out.
bit.ly/2Ovmvis
bit.ly/2ypee5D
This thread is 3 and a half years old so might be a better way out there by now? Something with better quality?
There's a Slingplayer app for the Fire TV. Why aren't you using it?
Sizzlechest said:
There's a Slingplayer app for the Fire TV. Why aren't you using it?
Click to expand...
Click to collapse
the slingplayer application for firetv does not work with all slingbox models. I use the app for tablet and I have installed a version of google playstore posted in this forum. For the user interface I use an i7 Rii mini with the function of "air mouse".
1. Google Play Services 11.9.75.apk
2. Google Play Store 8.5.39.apk
3. Google Account Manager 4.4.4.apk
4. Google Gmail (Login Interface) 5.6.102685581.apk
5. SlingPlayer Free for Tablet_v1.0.1.apk
Wow, what an old thread. I mothballed my streaming boxes because cable set top boxes are becoming rare. But while I had them running, my slingbox and Vulkano boxes worked great for streaming live tv!
Hey guys. Long time lurker and big fire phone fan. Right now I'm running 4.6.1 US Unlocked Fire OS on my ATT locked Fire phone. Without having to root *as I don't trust kingroot to have full unlimited access to my phone* is it possible to steam from Fire Phone to Chromecast? Not opposed to side loading gapps if required. Thanks!
Sent from my Samsung Galaxy S III using the XDA premium app.
Yes this is working with the gaaps even cast your screen is playing but I think the fire TV Stick is a much better product you can sideload apk and play xbmc/kodi on it
And if you Wont GApps. Patch only YouTube
Sure that Chromecast ist working? The app is working but i am not possible to get a connection to the chromecast. Any ideas?
Partyelch said:
Sure that Chromecast ist working? The app is working but i am not possible to get a connection to the chromecast. Any ideas?
Click to expand...
Click to collapse
I've yet to try honestly just been using my other device instead.
Sent from my SGSIII using the XDA premium app.
Fire phone working with Chromecast (audio)
I bought a bunch of Fire phones when it was selling on a fire sale! They all have been working fine with side loaded Google setup files (framework, play store etc). There were some good instructions to load four Google system files. Some occasional app may say this phone is not compatible and not allow you download from the Play Store, but those individual apps will work just fine side loaded.
Anyway, the Chromecast app downloaded fine from the Play Store, but would not connect properly with my Chromecast audio device for the initial set up. It recognized the device okay, but will not finish the initial set up. I thought I was out of luck. But then I tried with a proper (non-Fire) android phone and completed the initial set up. It connected the Chromecast device with the appropriate wifi network, downloaded the updates etc. and told me it was ready to cast. After that, I tried with the Fire phone, and voila.. everything has been working just fine.
I am sure you have some non-Amazon Android device you have lying around the house, or at least borrow for a while. Just complete the initial set up with that and you should be good to go.
I have done this only with Chromecast Audio (The newer version), but I am reasonably sure the same should work just fine with the video Chromecast too.
I use Chromecast all of the time with my Fire Phone (ATT 4.6.5.) Just works great along with all of the gApps... but who knows if that will be the case as the gApps get updated over time. For ATT versions, the 4.6.5 release was great in terms of being gApps friendly. If that changes down the road, then the next best option would be Slimkat or CM11.
I fact, I have both a Fire Stick and a Chromcast on the same TV, and the phone has more Chromecast options from within apps than FireStick casting options. Overall, I prefer using the Firestick with it's physical remote, but it is not as well integrated with android apps at the moment. Hopefully more developers will start using "fling" casting, but right now my main option is sharing a stream with Allcast.
Youtube works good for me. Pandora does also. Netflix Doesn't connect for me though. I highly reccomend the fire stick...
Hi I am currently using a gen 2 fire TV and recently signed up to sky. I sideloaded the sky go app using the app from my note 4 and anytime I try to play something on my fire tv I get the HDMI not supported error. I saw the list of working apps thread and it said sky go does work but I always keep getting this error. Any way to solve this?? Maybe a previous version of the app can be uploaded? Any help would be great!
Most mobile apps from cable or satellite providers don't allow you to view over a wired connection. So, the first thing to try is disconnecting your Ethernet cable to the router and use WiFi only. The app should then recognize your Fire TV as a mobile device.
mirayge said:
Most mobile apps from cable or satellite providers don't allow you to view over a wired connection. So, the first thing to try is disconnecting your Ethernet cable to the router and use WiFi only. The app should then recognize your Fire TV as a mobile device.
Click to expand...
Click to collapse
My fire tv is connected through wifi
i use this apk on my aftv2 (germany)
http://www.netzwelt.de/software-download/37855-sky-go-android-apk.html
Just googled: sky go for android tv
device is connected via lan and it is working, but u need a mouse (btw. it's more easy to navigate)
I've got 2 fire tv gen 1 models running the latest sky go app ( ver 5.0.4.9) downloaded from aptoide and both Fire TV's are connected by ethernet. Everything on sky go runs fine....except for sky news. That's where I get the HDMI not supported error as well, but as far as sky sports or sky movies or anything else on sky go, everything plays fine. I'm running the app with a wireless touchpad / keyboard ( logitech ) connected using a usb dongle.
http://gavin-blake.store.aptoide.com/app/market/com.bskyb.skygo/50400000/18293366/Sky+Go
callanish said:
I've got 2 fire tv gen 1 models running the latest sky go app ( ver 5.0.4.9) downloaded from aptoide and both Fire TV's are connected by ethernet. Everything on sky go runs fine....except for sky news. That's where I get the HDMI not supported error as well, but as far as sky sports or sky movies or anything else on sky go, everything plays fine. I'm running the app with a wireless touchpad / keyboard ( logitech ) connected using a usb dongle.
can you post a link to the apk you have working please callanish as im having that hdmi not supported message on my amazon 4k fire tv yet my first generation fire tv has the same sky go version and its working
Click to expand...
Click to collapse
Hi can someone please post a working sky go apk
Guys, just install Aptoide It's not a questionable website. It's an alternative to the Google app store and works well with the fire tv. Been using it for years.
Thanks Callanish I've tried a few versions but none work I've even transferred the app from my first generation fire tv using es file explorer to my 4k fire tv and i still get the Hdmi not supported message I'll try this later
mollygeorge66 said:
Thanks Callanish I've tried a few versions but none work I've even transferred the app from my first generation fire tv using es file explorer to my 4k fire tv and i still get the Hdmi not supported message I'll try this later
Click to expand...
Click to collapse
Just guessing, but I wonder if it's an HDMI HDCP issue you're coming across due to the copyright protection handshake between the fire tv and your tv. I've got two fire TV 1st gen's running on two Sony TV's and 1 fire stick running on a Vizio bedroom tv and need to use a bluetooth keyboard / touchpad with the stick and usb wireless keyboard / touchpad for the Fire TV's in order to make skygo function properly since there's no official Fire TV version, but my only HDMI 'not supported' issue I consistently get with Skygo on the Fire TV boxes and stick is when trying to access Sky news. Every movie, sports, other channels available on Skygo work fine.....except for sky news, and like you, I get that HDMI not supported message when I try to stream it. Also using a proxy to make it all work, but I'm not experiencing a channel wide HDMI 'not supported message' in the app like you're coming across. 5.1.0.47 is the latest app version of Skygo. Hopefully it works for you or you figure out where the problem might be.
Tried this version Callanish same message hdmi not supported can't figure out what the hell the problem is I'm baffled how the hell is it working on my original fire tv set up exactly the same way but won't work on the 4k fire tv I'm totally stumped
I'm having to send it back now as i got a system update today and following the update i couldn't connect a bluetooth mouse the powerlight kept blinking or not appearing even when the fire tv was on and then the remote started going mental contacted amazon and they are sending a replacement tomorrow and added bonus I'm getting to keep the remote and they are giving me a £10 credit following the problems hopefully the new one is better
Hi Mollygeorge, how do I move files from my Amazon Fire TV stick to my new 2nd gen Amazon Fire TV?
Thanks,
Christian
Comalley2016 said:
Hi Mollygeorge, how do I move files from my Amazon Fire TV stick to my new 2nd gen Amazon Fire TV?
Thanks,
Christian
Click to expand...
Click to collapse
just open es file explorer on both the firestick and fire tv which ever has the file you want to send long press it until a tick appears and select send and it will transfer it over
Replacement 4k fire tv arrived today tried sky go again same message hdmi not supported tried it in the tv which original fire tv is and sky go is working but still getting the damn message also can anyone confirm wether the powerlight should be on when using the 4k fire tv as a light only appears when i use the remote just confused as the original fire tv powerlight is on constantly
mollygeorge66 said:
Tried this version Callanish same message hdmi not supported can't figure out what the hell the problem is I'm baffled how the hell is it working on my original fire tv set up exactly the same way but won't work on the 4k fire tv I'm totally stumped
Click to expand...
Click to collapse
So, basically what we can surmise from all this is that the Fire TV 2 boxes have aggressive HDCP copyright protection built in to prevent apps like Skygo from functioning. The options remaining, imho, are either A) purchase another Fire TV 1 box used or new if you can find one B) purchase a new Fire TV stick as it's still a version 1 device and I can vouch that it still works with Skygo 2 C) run one of the many Android boxes out there, sideload skygo and do some testing, or D) Do what I did and run a Intel Nuc; (a windows type box) or something similar, and hook it up to a usb Wireless keyboard and run skygo through a browser. That's what I use as a backup option. Yes, you could also use a computer connected with an hdmi cable to a tv, but the Intel NUC, for me, streamlines the process. Probably impractical for your needs, but just want to point out another option. The Point is, unless some other people on the forum chime in telling you that they've gotten skygo to work on the Fire TV 2, and how they've done it, then it might be time to throw in the towel on this one and think about some other options. You know Amazon and Sky are going to continue to make it harder to do what we want, so it might be better to just find a box, like the Fire TV 1 or Fire TV stick and at least get Skygo working again.
For the record, I've got my Fire Tv boxes and stick blocked for any future Amazon firmware updates. I'm thinking that Amazon could introduce an update that prevents the Fire TV 1 and Stick from working with Skygo as well, so better safe than sorry.
Thanks for the reply Callanish I'm thinking I'll just leave it as it is and wait for someone to say wether on not there's a solution for sky go on the 4k version all my other apps bt nbcsn directv play flawlessly and i can't be bothered sending it back again and setting another one up from scratch thanks for trying to help
mollygeorge66 said:
Thanks for the reply Callanish I'm thinking I'll just leave it as it is and wait for someone to say wether on not there's a solution for sky go on the 4k version all my other apps bt nbcsn directv play flawlessly and i can't be bothered sending it back again and setting another one up from scratch thanks for trying to help
Click to expand...
Click to collapse
Sorry. Wish I could have been more helpful.
sry for the 2 years late answer:
you need to set "auto" in display-settings - not 4k/1080pX0/720pX0
Anyone know if the BTN2GO (Big Ten Network) app can be sideloaded onto the Fire TV Stick? They have the app for Android and Chromecast but haven't published it to the Amazon App Store and since I don't have Cable, I can't watch my team play football.
Thanks.
Just in case anyone has any ideas... I installed the app using the APK from my phone and it opens fine. However, I can't navigate well with the remote to be able to sign in or anything. Anyone ever tried this and gotten it to work well?
BTN2GO fail
I have tried 5 different versions of the BTN2GO app (phone and tablet) and all have either had your experience or have asked for location services to be enabled, meaning that it is not looking for the information that is already in the AFTV settings and there is no way that I have found to enable them for this app. Even tried settings.apk but when I tried to enable the location services in it, it just kicked me out to the main screen. Hopefully this is supported by next football season...
In the meantime, Playstation Vue has BTN (and a ton of others) for the $45/mo contract and has an official Fire TV app.
GBR!
Big Ten - GO!
I was able to I install the app using the APK from my phone and then I installed the Mouse Toggle for Fire TV from PlayStore for $2.99. Super easy install and setup. I then used the Mouse to maneuver around and signed into my Xfinity account.
NewbyOnFireTV said:
I was able to I install the app using the APK from my phone and then I installed the Mouse Toggle for Fire TV from PlayStore for $2.99. Super easy install and setup. I then used the Mouse to maneuver around and signed into my Xfinity account.
Click to expand...
Click to collapse
Could you possibly provide the APK file you used for this? When I push the APK from my phone and use Mouse Toggle, it asks for location services, as previously mentioned.
It's that time of year again so I, too, would love to get thsi working since BTN hasn't bothered to support it.
BTN on Fox Sports Go
Fox bought a majority share of the Big Ten Network prior to last season and has now integrated Big Ten Network into their Fox Sports Go app on Fire TV. No need to install the phone apk and deal with that interface. Hope this helps other B1G fans with Fire TV.
BTN2 Go
I'm using version BTN2Go_v6.0831 works fine on my Fire Stick Need a Keyboard/Mouse
This is stupid BTN hasn't released this to the fire tv.
I've been running a Fire Stick V1 since 2014. It came with OS 5.0.5.1, I rooted it and blocked updates. It worked just fine on a Sceptre 42" TV and later, a Vizio 50", both Smart TVs but I liked the navigation and flexibility on the Fire just a little better. Never planned on upgrading it since it supported 1080 and that's as high as my TVs go. But I had picked up a Fire Stick 4K during a promo and decided to try it, since it had the improved voice remote with CEC. So I swapped out the V1 for the 4K, which works well.
I have an old Panasonic Viera 42" plasma EDTV in a bedroom (480p only) on a Roku HD that's prone to overheating and is kind of an eyesore. Figured I'd swap out the Roku for the old Fire Stick. When I did, it named itself "Fire Stick 4K" for some bizarre reason. The really strange part is that the Home screen was completely changed from what it had been for years. It now defaults to two rows, "Featured Apps and Games" and "More Ways to Enjoy Your TV".
There are other issues...the Amazon Appstore doesn't work and while you can search for Prime Videos, you can't browse them. The app seems to have disappeared from all menus, although both of these apps are still showing up in "Manage Installed Apps".
I've tried all the standard fixes; clearing app caches and data, synching Amazon account info, de-registering and re-registering, etc. Didn't want to try a complete factory reset because I don't want to lose root.
Anyone see this kind of behavior before? It seems to have been triggered by setting up the Fire Stick 4K on the same network and TV, then repurposing the V1 on a new TV on the same network.
ConnCarl said:
Anyone see this kind of behavior before? It seems to have been triggered by setting up the Fire Stick 4K on the same network and TV, then repurposing the V1 on a new TV on the same network.
Click to expand...
Click to collapse
The name is probably caused from your router.
Your picture looks like the old fireOS Launcher. I've updated all my FTVs to the latest prerooted rom from rbox months ago. On the old 5.0.5 OS I got lately errors with prime video not loading, prime music doesn't start at all, etc. It's to old, you have to update too, I guess
Sus_i said:
The name is probably caused from your router.
Your picture looks like the old fireOS Launcher. I've updated all my FTVs to the latest prerooted rom from rbox months ago. On the old 5.0.5 OS I got lately errors with prime video not loading, prime music doesn't start at all, etc. It's to old, you have to update too, I guess
Click to expand...
Click to collapse
Interesting. Wonder why it was fine until I replaced it and repurposed it?
I guess there's no compelling reason to tinker with it at the moment. When I have some time I'll probably install TWRP and flash rbox 5.2.7.0_r1, just to see what it looks like.
Thanks!
So I did eventually try a factory reset, no difference. But when my second-gen Fire Stick started doing the same thing (my Fire Stick 4K was still fine, though), I decided to change out my router. I could have just done a factory reset on the router, but I was having some connectivity problems at max range anyway so it was time for an upgrade. Fired up the new router and the problem is gone.
So for anyone else with this problem, try a factory reset on your router (or a new one) before spending too much time on the Fire Stick.