Goodnight.
I have an LG G4 LS991 and use LGFlashTool2014.exe with the cse flash option with the kdz US99124a_00_0119.kdz.
Once the installation was over, the cell phone went out and died. does not enter download mode. does not go into fastboot. does not react to anything.
any solution?
thank you very much
sorry for the bad translation!
jonijej said:
Goodnight.
I have an LG G4 LS991 and use LGFlashTool2014.exe with the cse flash option with the kdz US99124a_00_0119.kdz.
Once the installation was over, the cell phone went out and died. does not enter download mode. does not go into fastboot. does not react to anything.
any solution?
thank you very much
sorry for the bad translation!
Click to expand...
Click to collapse
You flashed a US991 firmware on a ls991? Why? These are different models! LS991 is not US991.
Check what happens when connect it to your pc in the device manager. Do you see something like qhusb / qdl / 9008 device?
Sent from my LG-H815 using XDA Labs
steadfasterX said:
You flashed a US991 firmware on a ls991? Why? These are different models! LS991 is not US991.
Check what happens when connect it to your pc in the device manager. Do you see something like qhusb / qdl / 9008 device?
Sent from my LG-H815 using XDA Labs
Click to expand...
Click to collapse
Hi @steadfasterX
the reason was because I am from Argentina and the LG buy it by ebay to the US, in Argentina the code of the model is different, and as the KDZ started with "US" I thought it was that, totally wrong.
and yes, Qualcomm HS-USB QDLoader 9008
jonijej said:
Hi @steadfasterX
the reason was because I am from Argentina and the LG buy it by ebay to the US, in Argentina the code of the model is different, and as the KDZ started with "US" I thought it was that, totally wrong.
and yes, Qualcomm HS-USB QDLoader 9008
Click to expand...
Click to collapse
Have you tried this
https://forum.xda-developers.com/g4/general/guide-unbrick-via-external-sdcard-qfil-t3748946
ThePiGuy said:
Have you tried this
https://forum.xda-developers.com/g4/general/guide-unbrick-via-external-sdcard-qfil-t3748946
Click to expand...
Click to collapse
Hello
I'm going to try it and commented how it went
thank you very much
Related
My optimus G shows as a Qualcomm HS-USB QDLoader 9008 device in the device manager.
What can be done ?
bilalraybrig said:
My optimus G shows as a Qualcomm HS-USB QDLoader 9008 device in the device manager.
What can be done ?
Click to expand...
Click to collapse
There is a chinese website showing it is possible to unbrick.
I have't try it.
http://www.zpsjbbs.com/thread-5097-1-1.html
hi guys
i have same problem my lg optimus G. any one use this chines solution? working??????????
please tell me
thank you
kennyycc said:
There is a chinese website showing it is possible to unbrick.
I have't try it.
http://www.zpsjbbs.com/thread-5097-1-1.html
Click to expand...
Click to collapse
I take LG G3 D855 on aliexpress.com.
His have D85510e firmware
I want to flash Android 5.0 via LG Flash Tool. I flash 20e version. All flash without errors but after reboot phone not b oot.
His not boot in any mode. no any reaction. In device in PC I have qualcomm hs-usb qdloader 9008.
now I think that not D855 model. on site LG i not find any information with my IMEI.
One site find model D851 and on site T-mobile find IMEI and his blocked.
How I can find my wright model of phone?
Please help me. I stupid and I not make backup of firmware my phone.
update: I open my phone and on mainboard I find model D851 MAIN EAX65922601_1.0
PLEASE ANY HELP!!!
I have LG G4 (F500S) version
first i had ILAPO problem after upgrading...i used a method of disabling big cores but i had to choose TOT for H818 since TOT for H815 didn't work (WORKED!!! PHONE BOOTED thou i had to remove battery and plug in usb cable to phone, after NO BATTERY icon appear returned back battery and press VOL DOWN + POWER and remove usb after LG LOGO appear then phone boot successfully )...
after solving a problem of ILAPO i had another problem of VERY WEAK network signal, so i decided to change another kdz (H815)
now my phone has changed from 815 to 818 but whenever i try to boot it i get a blackscreen thou i can hear it booting...then after searching my IMEI info i found it is F500S i am a bit confused on what to do now!!
Same problem
sizzle05 said:
PLEASE ANY HELP!!!
I have LG G4 (F500S) version
first i had ILAPO problem after upgrading...i used a method of disabling big cores but i had to choose TOT for H818 since TOT for H815 didn't work (WORKED!!! PHONE BOOTED thou i had to remove battery and plug in usb cable to phone, after NO BATTERY icon appear returned back battery and press VOL DOWN + POWER and remove usb after LG LOGO appear then phone boot successfully )...
after solving a problem of ILAPO i had another problem of VERY WEAK network signal, so i decided to change another kdz (H815)
now my phone has changed from 815 to 818 but whenever i try to boot it i get a blackscreen thou i can hear it booting...then after searching my IMEI info i found it is F500S i am a bit confused on what to do now!!
Click to expand...
Click to collapse
99sago99 said:
Same problem
Click to expand...
Click to collapse
Reflash correct kdz with lgup doesn't help?
Sent from my LG-H815 using XDA Labs
steadfasterX said:
Reflash correct kdz with lgup doesn't help?
Sent from my LG-H815 using XDA Labs
Click to expand...
Click to collapse
It means i have to unlock a bootloader? cause i failed to do so!! how can unlock my F500S?
sizzle05 said:
It means i have to unlock a bootloader? cause i failed to do so!! how can unlock my F500S?
Click to expand...
Click to collapse
No unlock neededt just flash the original firmware
Kdz can be found here for example:
https://forum.xda-developers.com/g4/general/kdz-tot-lg-g4-variants-t3362423
Sent from my LG-H815 using XDA Labs
steadfasterX said:
No unlock neededt just flash the original firmware
Kdz can be found here for example:
https://forum.xda-developers.com/g4/general/kdz-tot-lg-g4-variants-t3362423
Sent from my LG-H815 using XDA Labs
Click to expand...
Click to collapse
Okey Thanks...Let me Try!!
facing same issue with my F500L i tried to convert in H815 but after H815 10c kdz itz wont giving display only shows booting sound and notification light blink during boot or red during charging
i and unable to revert to install F500L .kdz file and .tot file coz phone model changed to h818
how can i revert to alive my phone again or hardware issue occurred
please help
steadfasterX said:
Reflash correct kdz with lgup doesn't help?
Sent from my LG-H815 using XDA Labs
Click to expand...
Click to collapse
look here please help me https://forum.xda-developers.com/g4/help/lg-g4-screen-brick-t3563623/page2
SO SAD i had to ship back my G4 to China..seems none of the solutions worked for me!!
hello guys i want the lg correct tool that detect my g4 coreect version so i download and install in my phone
what is "LG correct tool"?
skdubg said:
what is "LG correct tool"?
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.nthung.lgphoneinfo
this tool is from 2014. i dont think it can identify a G4 correctly
aa7590 said:
hello guys i want the lg correct tool that detect my g4 coreect version so i download and install in my phone
Click to expand...
Click to collapse
only true way to know is by opening phone and reading the motherboards variant.. they can edit letters in software but not on motherboard..:good:
Since my H815T is stuck and i am getting "antirollback version is smaller than tot" even on 815T10H open Australia
Meaning that i have to go for official kdz and my imei confirms that it is an OPTUS Australia phone.
Therefore i need a offical OPTUS Australia firmware.
http://devtester.ro/projects/lg-firmwares/country.php?country=Australia#
have official firmware but when i click download nothing just blank page leading me to
http://pkg03.lime.gdms.lge.com/dn/downloader.dev?fileKey=FW8FBVV1329FAYXCC5FD3M7/H815T10h_00.kdz
Please suggest how to make it work or where could i get official Optus firmware H815T10H.
Thanks in advance.
Are you sure you have a H815?? There shouldn't for any antirollback for the H815T
Sent from my iPhone using Tapatalk
well... another case to the list.
You must open your G4 and see in the motherboard what model it is. Probably you have a refurbish G4 (maybe LS991 model).
the_naxhoo said:
well... another case to the list.
You must open your G4 and see in the motherboard what model it is. Probably you have a refurbish G4 (maybe LS991 model).
Click to expand...
Click to collapse
Alright opened my mobile and it have EAZ66585501_H810_MAIN_1.0 written on it. What does it mean?
And thanks to you guys and your prompt reply that we still have hope for our devices.
fawadshah33 said:
Alright opened my mobile and it have EAZ66585501_H810_MAIN_1.0 written on it. What does it mean?
And thanks to you guys and your prompt reply that we still have hope for our devices.
Click to expand...
Click to collapse
That means you have an H810 and not an H815
Sent from my iPhone using Tapatalk
hyelton said:
That means you have an H810 and not an H815
Click to expand...
Click to collapse
Thanks for the tip. Now how can i flash H810 firmware. LGUP gives error "invalid tot" when H810 tot is flashed.
fawadshah33 said:
Thanks for the tip. Now how can i flash H810 firmware. LGUP gives error "invalid tot" when H810 tot is flashed.
Click to expand...
Click to collapse
Sorry I can't help with that. That's not simple if it's possible especially if your getting antirollback problems.
I'd suggest returning the phone since it's been tampered with
Sent from my iPhone using Tapatalk