Hi there,as title says i got a dead bricked lumia 925 (RM-892) wich i managed to get it recognised by windows as QHUSB_DLOAD by shorting R3209.i am trying now to unbrick it by using thor2 mode,but however im stuck with that error wich says to try again with the right hex file.
Now,as i remember there is a 3050 fw version on my phone and every files i used are the latest,from 3051 fw.it makes sense that error.
Do somebody has any clue where can i get the right files for 3050 FW?have to mention my phone is a RM-892 VODAFONE GB (16gigs).
Phone model:*Lumia 925
PackageTitle:*RM-892 VAR GB VODAFONE 16GB SL WHITE
Product Code:*059S702
manufacturerHardwareModel:*RM-892
Thanks
No one?im kinda pissed with this phone already..but could really do use rightnow.
Seems to get nothing on google.where should i look for older firmwares of lumias?
Related
My Lumia 630 keep saying "ERROR: Unable to find a bootable option. Press any key to shut down". WDRT doesn't help, it says installation successful but after NOKIA screen the phone shows this error again. This happened after I installed Reset Protection cab file with iutool, but it has installed successfully, then I restarted the phone and it showed BitLocker recovery error saying that the key is missing from the TPM. Then I used WDRT and it flashed and after restart this error appeared What can I do now to make my phone live?
I had some issue on Lumia 520. Nokia care ppl said mother board failed/locked. Only way to get back it to work is by flashing*.
http://forum.gsmhosting.com/vbb/f672/success-lumia-520-wplock-emmc-error-unable-find-bootable-option-1931094/
Enable reset protection on unsupported phone will write an UEFI Variable to your phone that isn't supported by WP8.1 GDR1 or older version, which make your phone not bootable.
Currently you can't fix it unless a Lumia 630 firmware with WP8.1GDR2 or newer version available. As far as I know, only Lumia 930 has a leaked firmware with W10M 10240 available. I don't know how to erase that UEFI Variable on a retail phone manually.
Hello I have this phone, and its barely working, I bet previous owner do some kind of lashings to this phone and it didn't go well, because, I cant download apps it throws 8000ffff or 805a201d error, camera is not loading just grey out buttons and black screen, hardware it self is not damaged so i thing only software is broken, also i done 4x soft resets and 8x hard resets and it didn't helped, so please help me to fix this phone, thank you.
Type Designator: RM-823
Model Name: NOKIA Lumia 900
Product Code: 059P706
Software Version 2175.2503.8779.12301
P.S Windows device Recovery tool is not detecting phone, but pc and zume detects.
Greetings Everyone,
I need help regarding my hardbricked LG F460L. As of right now it is in DEADBOOT (The screen won't turn on even if I plug it in) So, I can't boot into RECOVERY, DOWNLOAD MODE, or FASTBOOT. However, when I connect my phone to my Win 7 64-bit PC, it is detected as QHSUSB_BULK.
This nightmare happened because I flashed a D855 modem.iso to my F460L, I accidentally flashed the incorrect modem.iso in TWRP and i've been screwed since then.
After reading and scouring through every LG F460L/K/S Cat 6 Unbricking threads in XDA, I have found three methods:
https://forum.xda-developers.com/lg-g3/general/fix-unbrick-lg-g3-stuck-qualcomm-hs-usb-t2933853
- I have installed the QUALCOMM driver, my phone is now detected as Qualcomm QDLoader 9008. This is in accordance to the BoardDiag method. Using willcracker's boarddiag program, I connected my phone to my pc and clicked start HOWEVER I always get the device not found in dload trying flash programmer error after 2 minutes. The AP Chipset I chose is B2 since there is no MSM8084 or APQ8084 chipset for the Cat 6 in the program
If anyone has a working BoardDiag program that supports the Cat 6, please do post a link in the comments or PM me if you so prefer.
= ~FAILED~
https://forum.xda-developers.com/lg-g3/general/unbrick-debrick-f460-boot-security-t3352382
- I tried to boot through an external Micro SD card by flashing a "debrick.img" to the SD card. There were 5 debrick images listed in the guide, however, all of its download links are down (220, 200, 180, 160, and 140 are all down)
Thanks to the efforts of other users, I was able to download a debrick image file for the F460. Upon mounting the flashed Micro SD card, my screen turns on and I can enter download mode BUT it was of no use since I was stuck in an eternal "Secure Booting Error!" bootloop.
If anyone has a working link to the 5 debrick images for the F460, please share.
= ~FAILED~
https://forum.xda-developers.com/verizon-lg-g3/general/fix-unbrick-hard-bricked-lg-g3-vs985-t3467067
-Finally, there is the Wire Trick (Test Point/Shorting Points) method, this method carries a risk of DAMAGING HARDWARE since you can fry your mobo if you're careless.
Since my phone was already detected as Quallcomm QDLoader 9008, I skipped this method, but beacuse the first method is not working for me, I wanted to get back to this.
I was actually desperate enough to attempt this, however, upon reading the warnings and disclaimers, I had to think twice about it. The trick was to short a point near/beside the processor and short it to ground. It is relatively simple and easy (For the International versions) but since I have an F460 Cat 6, my board is SIGNIFICANTLY different from the mobos of the International/European versions.. Images and diagrams online, looks different to an F460L mobo. Can't risk frying my phone!
Since there is no information/images/guides regarding how to short an F460 Cat 6, I put out this method for later study.
If anyone can point me where to short these pins or help me find the correct pins, I would appreciate it.
= ~FAILED~
http://cafe.naver.com/develoid/562849
:crying: I am desperate because support for the Cat 6 seems to be very poor, and the Develoid Cat 6 forum in Cafe.Naver is apparently region-locked, only allowing Koreans. I can't seem to register an account since it requires an I-PIN or a Korean phone number.
Please Help Me!!!!!!!!!!!!!!!!!!!!!!
If anyone can provide me with other methods (except paying for overpriced JTAG repairs ) I will really appreciate it!
and Thanks everyone!
If you have a working link to the 5 debrick images for the F460, please share.
Thanks you so much
Boot verification fail!cause : mismatch_sig_len please help me asap pleaseee
So unlocking the bootloader seemed to go well. I used the FFU downloaded by the Recovery Tool specifically for my phone, and the same HEX loaders/SBL3 engineering files everyone recommended using.
Flashing the Windows 10 image seemed to go well too, progress bar got to 100% and then.... all hell breaks loose. It shows the ATT logo, then Nokia logo, then nothing but a black screen.
I figure... okay, that sucked pretty bad... lets just go back to 8.1... nope... whenever I try to flash the original FFU, WPInternals auto-fails, telling me (Flash failed! Error: 0x1304: Invalid platform ID)
Uh oh... okay, better try to restore the bootloader... also nope... then it tells me "Error using FFU. Try an FFU image which matches the phone"
Alrighty... maybe this tool just isn't cut out for that, lets try the WDRT... one last nope. It picks up that the phone is the exact one WPInternals told me it wasn't, downloads... does the battery check, restarts the phone, then seems to not even try before saying "Operation Ended in Failure"
So I failed at getting it running W10m, and are stuck in a position where it won't allow me to restore bootloader, do anything with root access... or go back to WP8.1. I have no idea what I did wrong. Of course the end goal was to get it on W10, but at this point I just wanna see it work again.
Yesterday I found a old lumia 640 dual sim in the storage from my brother running windows 10 mobile 1703, and after i searched his phone, i found an app called "CMD Injector" and there is a option to update that phone to 1709 fall creators update despite not being supported, because of curiousity, i decided to update that phone to 1709 but after updating, the phone feel constantly lagging and many times slower, the phone model was changed to lumia 950 xl (i was able to change the model name to 640 dual sim after a complete reset)
Could you guy please help me to downgrade the phone back to version 1703?
(Edit: I once tried to use windows device recovery tools to downgrade it to windows phone 8.1 then update it to windows 10 mobile using otp updater, but it just can't detect my phone.)
Version 1709
Build Number 15254_547
Model RM-1077_1006