I have the Tilt 8925. I added the new sounds for the sliding keyboard through registry hack. however, they are tooo loud. Does anyone know how to tweak the volume level for the keyboard sounds? I have found the tweaks for other volume levels, but not this. Also, what are the maximum levels that the speakers can handle? The highest i have anything set to is 15, but my ringer is still softer than my keyboard sounds when opening and closing. Thanks in advance for all that you do for us "technically challenged"!!
REQUIRES PERSEUS KERNEL 34.2 OR ABOVE
Disclaimer: I am not responsible for any damage this app may cause.
This app is now open sourced and is available at:
https://github.com/EternalMelody/HeadphoneAmpControl
This app allows the user to handily change Headphone Amplifier Levels. Root access is required for file permission changes to the following files:
-"/sys/class/misc/wolfson_control/headphone_left"
-"/sys/class/misc/wolfson_control/headphone_right"
Two launchers can be found in the app drawer. One launches the Control app, another launches an overlay dialog for quick amplification level changes.
App Guide:
-Balance L/R toggle: Toggles amplification level balance between the left and right channels. When checked, disables the right channel seekbar and copies the left channel amplification level value to the right channel.
-Main seekbars: Current amplification level values. The top one is left channel's, bottom one is right channel's. The minimum and maximum values are defined by "Min level" and "Max level".
Control App Guide:
-Min level seekbar: Minimum amplification level that is settable by the main seekbars. Cannot be higher than safety level or max level.
-Max level seekbar: Maximum amplification level that is settable by the main seekbars. Cannot be lower than safety level or min level.
-Toggle service (notification bar shortcut): Enables notification shortcut. Must be checked to enable safety level. Notification only appears when headset is currently plugged in.
-Toggle volume button hack: Automatically sets checked volume type to almost max. The volume buttons can then be used to directly adjust amp levels, depending on context. The seekbar determines amp level jump.
-Hack music volume: Enables volume button hack for music, media, video, and games volume
-Hack voice call volume: Enables volume button hack for voice call volume
-Hack ring volume: Enables volume button hack for call ringtone volume
-Safety level: When headset is plugged in the first time, the current amplification level is compared with the safety level. If current level is higher than the safety level, then the current level is lowered to the safety level.
Development made possible by help of:
-AndreiLux
Do you think you can hook into the volume button events and override the digital volume? Would be a great addition in functionality.
Edit: missed that sentence in your post
AndreiLux said:
Do you think you can hook into the volume button events and override the digital volume? Would be a great addition in functionality.
Edit: missed that sentence in your post
Click to expand...
Click to collapse
On the i317 version of your kernel,
The amp level now can't be lower than 20? If I try to set it below 20 (whether through STweaks, my app, or directly editing the file), it will just be assigned 20. Intentional? Because STweaks isn't updated to reflect this.
By the way I just updated the app to have volume button support.
EternalMelody said:
On the i317 version of your kernel,
The amp level now can't be lower than 20? If I try to set it below 20 (whether through STweaks, my app, or directly editing the file), it will just be assigned 20. Intentional? Because STweaks isn't updated to reflect this.
By the way I just updated the app to have volume button support.
Click to expand...
Click to collapse
Yes, you're right. It's currently hardcoded to a minimum of 20, I'll change in the next version.
I can't seem to get the button hijack to do anything at all though with your new version? Still only controls the stock/digital volume.
AndreiLux said:
Yes, you're right. It's currently hardcoded to a minimum of 20, I'll change in the next version.
I can't seem to get the button hijack to do anything at all though with your new version? Still only controls the stock/digital volume.
Click to expand...
Click to collapse
Even when the notification icon shows up?
EternalMelody said:
Even when the notification icon shows up?
Click to expand...
Click to collapse
That option currently doesn't do anything, no icon shows up.
AndreiLux said:
That option currently doesn't do anything, no icon shows up.
Click to expand...
Click to collapse
Hmm the icon needs to show up for it to work. The icon will only show up when headset is plugged in. Is headset plugged in? Btw there's also a bug in the checkboxes behavior which I just fixed. Try the new .apk.
EternalMelody said:
Hmm the icon needs to show up for it to work. The icon will only show up when headset is plugged in. Is headset plugged in? Btw there's also a bug in the checkboxes behavior which I just fixed. Try the new .apk.
Click to expand...
Click to collapse
Ah I see now. Stupid me. I thought you were also overriding the speaker amp.
Nevermind then, everything works fine in that case. I'll fix the minimum volume in the next kernel version.
guys can it also be implement on bluetooth headphone?
edan1979 said:
guys can it also be implement on bluetooth headphone?
Click to expand...
Click to collapse
Unfortunately, this will not work on bluetooth headphones.
Hi. I have downloaded the App but I can't get it working....if I enabled balanced L/R but if I move the slider to the left the volumn doesn't get lower
Hi DirkStorck. Can you give me more details? The audible volume didn't get lowered with headphones on?
Short question: on what level should I keep the normal, digital volume control for best sound quality? Does it matter? Thanks
Sent from my GT-I9300 using xda app-developers app
hickz123 said:
Short question: on what level should I keep the normal, digital volume control for best sound quality? Does it matter? Thanks
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
For best sound quality it is advised to keep digital volume at max.
Sound quality is not altered by digital volume. However, you want the analog volume (the amp levels) to be as low as possible for your purpose, because higher analog volume means more noise.
Eternal, is there a way to use it with boeffla kernel?
Ty a lot!
Great app! I can't believe I didn't find it until now.
If I could wish for something it would be a gray scale notification icon - silly little thing, I know. But I also realize that you've probably moved on by now. Regardless, thanks a million for this.
This app is now open sourced and is available at:
https://github.com/EternalMelody/HeadphoneAmpControl
Anyone can recommend a small widget which I can use to change sound setting?
So, I like to have different kind of sound settings, for example:
- All silence, except alarm and phone call
- All on, except media is off
- All max
I am wondering if I can have an "icon" on the home screen which I can quickly change it and also "show" which setting is on.
Thanks.
There's an app called Tiles in the playstore. It's fantastic. You can add all kinds of useful things to quicksettings included vibration mode and volumes. I can link it shortly.
Or you can try Ringer Modes - Quick Tile which will place it for you in the notifcations drop down.
https://play.google.com/store/apps/details?id=com.cgollner.quicktiles&hl=en
Another option is HD Widgets
https://play.google.com/store/apps/details?id=cloudtv.hdwidgets&hl=en
That is an option in there as well. It has lots of customization. It's even on sale right now.
Thanks all, I will take a look at those.
I've been using Audio Manager PRO from Smart Android Apps, LLC for years.
You can set levels for alarm, media, ringer, system, call, and save the settings to profiles that can be placed on any home screen. I have one for work, home, car, and they do have a widget showing current levels as well.
Might be a fit for what you're looking for.
Are there any existing mods for the 5t notification slider? Preferably something to change it all together like screen brightness : normal >adaptive>night?
I personally find the ringtone volume settings useless, as I keep it on medium volume. But I do change work shifts monthly and it makes setting a screen brightness schedule more of a task.
Hello,
I use POCO F3, Android 12, with xiaomi.eu 13.0.6, root and Magisk.
Until a while ago I was using Audio Manager Pro which is very convenient because by clicking on the widget you could choose from preset configurations and that way you immediately had the audio volumes adjusted as you wanted. For example all volumes high or phone volume low and alarm clocks high.... Very convenient and fast.
In the latest versions of Android some audio channels I can't separate and I can't find an app or widget that does that.
Do you know of a solution to separate audio channels and a widget to quickly set your preferences?