Hi! i am new to the forum and have a Letv Le 1 Pro US with stock malware Rom.
I want to change to CM12.1 ROM v3 by BetaHydri. But have a few questions. I am in doubt in rooting stock rom and clean the trojans and adware or changing to this custom Rom.
The rom in question is in this thread, but i can't ask there:
http://forum.xda-developers.com/leeco-le1-pro/development/cm12-1-rom-betahydri-letv-1-pro-t3416651
1-My question is if the GPS works fine? In stock Malware Rom is very fast. I see some custom roms with gps problem.
2-4G data works well on Sim2? and Hotspot?
3-Is any major bug on this v3 Custom Rom?
4-How many free Ram is available? without installing other apps besides the ones that are in the ROM.
Thank You, especially the user @BetaHydri
i need your help too sir
cm-12.1-20160713-Bet…weakV3.zip501.1 MB , so the system just 500 mb?
now im still using eui with malware , so i just follow the installation step?
Tested V3 installation sequence
I went to TWRP 3.0.2 for a factory reset wipe
Installed ROM "cm-12.1-20160713-BetaHydri-CollapseTweakV3.zip"
Installed OpenGApps arm64 5.1 Nano
Installed all three ZIPs from DolbyAtmos Fix
Wiped Caches via TWRP
Rebooted
I'm on the V4, and actually everything seems good! Just have to test some sensors (Gyroscope)
Presidente_84 said:
Hi! i am new to the forum and have a Letv Le 1 Pro US with stock malware Rom.
I want to change to CM12.1 ROM v3 by BetaHydri. But have a few questions. I am in doubt in rooting stock rom and clean the trojans and adware or changing to this custom Rom.
The rom in question is in this thread, but i can't ask there:
http://forum.xda-developers.com/leeco-le1-pro/development/cm12-1-rom-betahydri-letv-1-pro-t3416651
1-My question is if the GPS works fine? In stock Malware Rom is very fast. I see some custom roms with gps problem.
2-4G data works well on Sim2? and Hotspot?
3-Is any major bug on this v3 Custom Rom?
4-How many free Ram is available? without installing other apps besides the ones that are in the ROM.
Thank You, especially the user @BetaHydri
Click to expand...
Click to collapse
everyone works mate just go ahead and install v4 cm
I'm on V3 and all seems ok, what's the differences between V3 & V4?
martinbanshee said:
I'm on V3 and all seems ok, what's the differences between V3 & V4?
Click to expand...
Click to collapse
"Only some build.prop changes as some folks reported problems. [...]
one of the main changes was this:
ro.telephony.default_network=22,22 and ro.ril.hsxpa=1
it was before
ro.telephony.default_network=10,10 and ro.ril.hsxpa=2"
So LTE and UMTS changes basically
Thanks, I'll try V4 for a few days and see how it goes.
Sent from Tapatalk
thank you all guys.
Now i am with the stock original ROM EUI without malware, without any problem.
Can anyone post some pictures or screenshots from CM 12.1 ROM v4?
to see the appearance of the system
Stiffrigg said:
I'm on the V4, and actually everything seems good! Just have to test some sensors (Gyroscope)
Click to expand...
Click to collapse
How about MHL TV-OUT & IR blaster?
hello guys, sorry for bad english, i have problem on CM 12.1 V3, when some call me or message come my flash blinking. How to fix that?
dragangiga said:
hello guys, sorry for bad english, i have problem on CM 12.1 V3, when some call me or message come my flash blinking. How to fix that?
Click to expand...
Click to collapse
BetaHydri said:
Hi,
you don't need to uninstall FlashRing.
With the Flash RIng App you can configure which APP and when the Flash should be used for notification.
View attachment 3819790
View attachment 3819791
View attachment 3819792
View attachment 3819793
View attachment 3819794
Click to expand...
Click to collapse
Sent from my LeTv 1 Pro using Tapatalk
letv le 1 pro
willngg said:
Sent from my LeTv 1 Pro using Tapatalk
Click to expand...
Click to collapse
i fix it
thanks a lot
System freezes when data connection switches to Edge
Hi All,
Using this ROM from BetaHydri, overall it works really good, however I have a problem that is getting annoying: whenever the phone switches to Edge from LTE/HSPA, the system freezes. As this can happen even in a staircase in an office building or on a train ride on the countryside it is rather vexing.
I have deleted the caches, but the issue persists.
Has anyone encountered the same problem maybe? Any ideas how to solve this?
Evaluation and some solutions
After some evaluation I can say this rom is really good.
There were some issues however:
I had sensors malfunctioning (gyro inverted). There is some discussion on this subject in Betahydri's developer thread, but I cannot post there as I'm considered a newbie by xda
Somehow the sensor calibration file (/persist/sensors/sns.reg) can get messed up. The trick is to delete the file, and on the next boot the system should replace it with the defaults, which are in /system/etc/sensors/sensor_def_qcomdev.conf. But this is not (always?) happening on this CM rom. What I did to resolve was to delete /persist/sensors/sns.reg, make a full TWRP backup, factory wipe, flash cuoco's 11s rom, start it, confirm if the gyro is working again, then restore the TWRP backup. Maybe there's a simpler way, but this worked.
I had a non-working notification LED. Wiping data in TWRP solved this, but I just had to find out what it was It turns out wiping the data of Settings Storage (com.android.providers.settings) was enough to restore the notification LED. The culprit is that there is a value in the settings.db of this component, in the system table called notification_light_pulse which was set to 0 somehow. Setting it to 1 with SQLite Editor (speed software) also solved the problem. There are more interesting values in this table by the way.
IR is not working, this is a known issue and I have no solution.
Double tap to wake does not work, at first I thought this would be a showstopper for me, but then I found out that with the Gravity Screen app, I can wake and sleep by using proximity and G sensors, which more than satisfies my needs for easy wake up and sleep.
OTG is not working natively, this can be overcome by third party apps like USB OTG helper. Could have something to do with fuse kernel modules not being available.
Volume level of ringer/notification is not calibrated, first step is already very loud and it doesn't change much if set higher. Does somebody now a solution for this?
I have dual SIMs and I could not switch one SIM to anything else than GSM only. Trick is to disable the other SIM, then set the network mode you want, and then re-enable the other SIM. There can be only one SIM for data, but somehow it wouldn't switch if the other SIM (that currently has the data) is still active.
If I find more, I'll post here.
Getting pretty bad battery drain. I went from 100% to 60% in a few hours and I didn't even use the phone, it was just sitting on standby
chr0m said:
Getting pretty bad battery drain. I went from 100% to 60% in a few hours and I didn't even use the phone, it was just sitting on standby
Click to expand...
Click to collapse
You can try to see what is happening with OS Monitor (from play store) In settings, enable expert mode to see the native Linux processes, try to find the one that is eating the cpu. I had this once, it was some media indexer process that would not stop (can't remember the exact name).
xposed
Hi all,
Since i cannot post in ROM's thread, i will ask here for your help. I am having a hard time installing Xposed on BetaHydri-CollapseTweakV4.
I get an error while fashing Xposed Framework xposed-v86-sdk22-arm64:
<<Xposed version: 86
! Wrong platform: arm
! This file is for: arm64>>
So i successfully flashed the arm framework (for 32 bit), for afterwards to install XposedInstaller_3.0_alpha4. But now i am getting "Xposed Framework installed, but now active."
Any idea? Thanks.
Am I am on TRWP 3.0.2.0 by CUOCO92, coming from Le1PRO_US_X800-ROW-PB-v60-CUOCO92-5.5.014S.
Hi all
I've got the US version and I'm with 12.1 v4.
I got only edge on data sim (the other is one only for calls)
Any ideas as I can't select any options but GSM from the hidden menu in *#*#4636#*#*?
Is it OK if I flash 14s Cuoco now as I'm in 12.1?
---------- Post added at 02:42 PM ---------- Previous post was at 02:28 PM ----------
I just followed #slidetowipe and now I got LTE
T H A N K Y O U M A N ! ! !
It's interesting how the same phone works differently for different people... what I mean is that the GPS on my phone is very bad - it was bad from the very beginning with factory ROM, with MrRusch ROM, different versions, gps.conf tweaks, etc.... Now I am using an external bluetooth GPS receiver as the fix was painfully slow or non-existent. Some people report no such problems, how can that be, I wonder?
Now I use CM 12.1 V4 ROM from BetaHydri, But I found some bugs :
1. Error clock / alarm... If I choose setting or an alarm clock, appeared notification "unfortunately, clock has stopped"
2. IR isn't working
3. And I have a problem with the network 4G LTE, where the issue there is no on EUI ROM
Please help me to fix it.
To be honest I prefer premises EUI ROM if there is not malware and adware, Is there EUI ROM clean of Malware and adware?
If there are please help me to link from the ROM and the way instal rom, because I was new in using x800.
And I had experienced hard brick at instal couco92 14S.
Thanks
Hi Guys!
I already posted this in the specific SM-G935F thread, but maybe my two problems are not device-specific and some user of other phones had this issues or have an idea what cause my problems.
After searching in the internet and many forums I think that I am the only person in this world, who have this problems.
My Phone: Samsung Galaxy S7 Edge (SM-G935F/hero2lte)
Important: These two problems don't occur with the stock rom and everything worked.
I tested this by installing the original samsung rom (Android 6 and 7).
Also with Superman-ROM these problems don't occur.
Only with LineageOS and RessurectionROM (based on Lineage) I have this problems.
What I did (or not):
- ODIN: Installed latest version of TWRP
- TWRP: Installed SuperSU 2.83 and "dm-verity-disabler"
- TWRP: Installed latest LineageOS-Build (Full Wipe) + latest GApps (Pico) + addonsu-arm64
- I did not install any other apps in Lineage
- I did not change any settings
-> I have a clean version of LineageOS on my phone.
Problem 1:
During calls, when I turn on the loudspeakers, I can hear the other person, but I can not be heared by the other person anymore.
Then I turn off the loudspeakers and everthing switches: the other person can hear me now, but I can not hear the other person.
When I'm turning the loudspeakers again it will switch again (I hear the other, I'm not heared).
And so on, and so on ...
Problem 2:
Screen rotation from portrait to landscape mode ONLY works with the gallery and the icons of the camera.
In any other app (Browser, Messages, Settings ...) the screen stays in portrait mode.
And yes, I checked in the settings if screen rotation is active.
I found a solution with the app "Rotation Lock Adaptive", which automatically rotates the screen how it should be.
But that is unsatisfactory, I don't want a additional app to do core-function.
I don't believe the problems occur due hardware issues or what do your think? Beeing on stock rom everything works fine.
Greetz,
Isenberg
Really nobody has an idea what could cause my problems?
Isenberg said:
Really nobody has an idea what could cause my problems?
Click to expand...
Click to collapse
I have not
I experience the exact same problems. Flashed lastest stock-firmware (excluding system & data) and the latest official lineage os.
Sometimes rotation works, but most the time not.
hi, i am having problem with network using custom rom, sudden network restart/disappear and sometimes my phone go back to lockscreen while the network disappear. been using 4g and happen while onload with download or streaming, when active on hospot too.. happen with many custom rom that i tried with different kernel/stock/clean flash such as, crdroid with harfix kernel, aoscp with clean flash without install any apps, aex 1st build and latest build by dave. maybe my 4g network problem, i dont know but there's no problem with 4g signal.. just wanna know if someone having this problem. not happening too often tho.. and hard to replicate the problem..but its not a big deal to me...just wanna know.. thanks.
I had that same issue
Similar Problem
This issue is simillar problem like on this thread.
Hello guys how u doing
Ive installed Xiaomi.eu 20.4.30 and 20.5.7 builds on my whyred device, the probem is I am facing UI Freeze and hang issues (3 freezes in 1 hour). Sometimes i open an app and it gets stuck untill it asks to force close the UI.
Anyone else facing the same problem?If anyone has any solution please Help
Thanks In Advance
The same thing happened to me, the only solution I found was to install the new rom with a data format
xmae said:
The same thing happened to me, the only solution I found was to install the new rom with a data format
Click to expand...
Click to collapse
U installed Xiaomi.eu build after formatting?
Also which build?
if you install version 20.4.30 over 20.5.7 you have the problem you are talking about
what I have done since twrp is a wipe data, dalvik and cache and then install version 20.5.7 only, then restore the copy of micloud and it is perfect
Sidgup1998 said:
Hello guys how u doing
Ive installed Xiaomi.eu 20.4.30 and 20.5.7 builds on my whyred device, the probem is I am facing UI Freeze and hang issues (3 freezes in 1 hour). Sometimes i open an app and it gets stuck untill it asks to force close the UI.
Anyone else facing the same problem?If anyone has any solution please Help
Thanks In Advance
Click to expand...
Click to collapse
I am not facing freezes that much, but i gotta agree this miui is really laggy. Its stable enough, but the dropped framess andd battery drain is really huge. I hopee future updates adressses this
Sidgup1998 said:
Hello guys how u doing
Ive installed Xiaomi.eu 20.4.30 and 20.5.7 builds on my whyred device, the probem is I am facing UI Freeze and hang issues (3 freezes in 1 hour). Sometimes i open an app and it gets stuck untill it asks to force close the UI.
Anyone else facing the same problem?If anyone has any solution please Help
Thanks In Advance
Click to expand...
Click to collapse
I'm using Miui 12 on whyred; seems like the laggy experience is due to kernel problem. Just flash a custom kernel (tested with Rad kernel 4x) and the lag will gone. Hope it works for you.
Due to extremely high no. Of rom flashes in a day (3-4 roms/day) I've locked my bootloader and back to miui 11.0.3.0
Thanks all for ur help :angel: