Develop Bugs

I am bricked my phone

hello guyz please help I am install bnd L34 firmware ton my bnd-Al10 from firmware finder app and it successfully installed but I am rebooting my phone its boot on erecovery mode and my frp is locked and the bootloader unlock site is down what can I do ,?

[email protected] said:
hello guyz please help I am install bnd L34 firmware ton my bnd-Al10 from firmware finder app and it successfully installed but I am rebooting my phone its boot on erecovery mode and my frp is locked and the bootloader unlock site is down what can I do ,
Click to expand...
Click to collapse
bootloader unlock code different from frp unlock code.
installing other device firmware has chance to replace oeminfo.img partition. Changing this partitin often causes locked frp.
If lucky you can wipe from the erecovery that is loading. maybe even couple times. Then maybe it will boot. Other that that there has been no public mention of any fix.

do your best to fix it using hisuite or other methods if you can. if you have twrp that can help if you have stock recovery and locked frp your only hope might be hisuite and if that fails you will need a paid option like dc-phoenix or funkyhuewei. i only have experience with dc-phoenix, and it did fix my locked frp completely bricked phone, but i read that funky also works well but is nearly 3 times as expensive. (15€ vs 50€)

[email protected] said:
hello guyz please help I am install bnd L34 firmware ton my bnd-Al10 from firmware finder app and it successfully installed but I am rebooting my phone its boot on erecovery mode and my frp is locked and the bootloader unlock site is down what can I do ,?
Click to expand...
Click to collapse
Hello friend i had done the same i installed L21 firmware from firmwarefinder to my BND-AL10 and same happened my phone was bricked it was directly taking me to the stock recovery but my bootloader was locked and lucky i had Kept my bootloader unlock code with me when the site was up so when i unlocked my bootloader it did factory reset and booted normally and Oreo was installed but the only problem im facing is my build number is still showing the old one which is BND-AL10C675 B161 and i don't have face unlock and ride mode which comes with Oreo i had face unlock with BND-AL10C675 B161 . My frp was unlocked already .

sygladiator said:
Hello friend i had done the same i installed L21 firmware from firmwarefinder to my BND-AL10 and same happened my phone was bricked it was directly taking me to the stock recovery but my bootloader was locked and lucky i had Kept my bootloader unlock code with me when the site was up so when i unlocked my bootloader it did factory reset and booted normally and Oreo was installed but the only problem im facing is my build number is still showing the old one which is BND-AL10C675 B161 and i don't have face unlock and ride mode which comes with Oreo i had face unlock with BND-AL10C675 B161 . My frp was unlocked already .
Click to expand...
Click to collapse
The displayed build number comes from the data part of the update. (Update_*hw_*.zip)
If you reflash again all three files , might be fixed

mrmazak said:
The displayed build number comes from the data part of the update. (Update_*hw_*.zip)
If you reflash again all three files , might be fixed
Click to expand...
Click to collapse
How should i reflash it , can you please provide me the procedure to do so , it would be very helpfull

sygladiator said:
How should i reflash it , can you please provide me the procedure to do so , it would be very helpfull
Click to expand...
Click to collapse
If flashing again is the answer to solve problem. Use my guide here.
You are on Oreo now so use the top portion. "Flash update"
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649

mrmazak said:
If flashing again is the answer to solve problem. Use my guide here.
You are on Oreo now so use the top portion. "Flash update"
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
Click to expand...
Click to collapse
It all goes above my head , what exactly i have to do please elaborate .

sygladiator said:
It all goes above my head , what exactly i have to do please elaborate .
Click to expand...
Click to collapse
I don't want to sound like rude or anything.
But I put it all pretty simple, I thought. Like 4 steps
Download files
Put files on SD card
Install twrp
Install file I shared
If that is over your head, maybe you should not have modify and phone.

mrmazak said:
I don't want to sound like rude or anything.
But I put it all pretty simple, I thought. Like 4 steps
Download files
Put files on SD card
Install twrp
Install file I shared
If that is over your head, maybe you should not have modify and phone.
Click to expand...
Click to collapse
Sorry for silly questions by the way thankyou for your help
There is no other options to install other than installing through twrp???
Will i get OTA updates of my bootloader is unlocked ??
If not then i vl be happy to install RROS 8.1 coz am on oreo that means i have treble support so i can just install it
So far so good

sygladiator said:
Sorry for silly questions by the way thankyou for your help
There is no other options to install other than installing through twrp???
Will i get OTA updates of my bootloader is unlocked ??
If not then i vl be happy to install RROS 8.1 coz am on oreo that means i have treble support so i can just install it
So far so good
Click to expand...
Click to collapse
I know each device has it's own proceedure to, flash and all, and they are similar but different.
So can be confussing

Update a locked P20 with stock roms

Hi to all,
i have a P20 branded (and with bootloader locked), with verey delayed software updates.
I would like to if i could update it using the roms downloaded through Firmware finder, and which is the procedure, since i tried to download the latest update.zip found on FF, unpacked in the dload directory of my phone, rebooted on stock recovery (vol up+vol down + power) and had a generic error.
thanks a lot for your informations.

Packing yourself a 'non-working' dload with extracted update.app from original firmware found on Firmware Finder won't work...
To force an update with a locked bootloader, you could :
-Try to update with FirmwareFinder's DNS, Hisuite 5 and an IMEI-approved OTA-MF ; You'll be updated without any userdata erased.
-Use a working dload firmware for your model and cust to update. Download said dload archive for free from http://androidhost.ru ; Your SDcard or your USB-OTG must be ExFAT formatted for dload update to work !!!
All your userdatas will be erased this way.
-Buy your bootloader's unlock code online from a third-party. Unlock your bootloader. Install a working twrp custom recovery. Use HuRUpdater with any updated firmwares for your model and cust you can find with FirmwareFinder. You'll be updated without any userdata erased.

oslo83 said:
Packing yourself a 'non-working' dload with extracted update.app from original firmware found on Firmware Finder won't work...
To force an update with a locked bootloader, you could :
-Try to update with FirmwareFinder's DNS, Hisuite 5 and an IMEI-approved OTA-MF ; You'll be updated without any userdata erased.
-Use a working dload firmware for your model and cust to update. Download said dload archive for free from http://androidhost.ru ; Your SDcard or your USB-OTG must be ExFAT formatted for dload update to work !!!
All your userdatas will be erased this way.
-Buy your bootloader's unlock code online from a third-party. Unlock your bootloader. Install a working twrp custom recovery. Use HuRUpdater with any updated firmwares for your model and cust you can find with FirmwareFinder. You'll be updated without any userdata erased.
Click to expand...
Click to collapse
Can i used this ExFAT method to flash rollback update to p20 with unlocked bootloader and locked frp (kinda like bricked) cuz i go to huawei customers support and they sayed if they flash me android 8.1 my phone will die?

cropp7 said:
Can i used this ExFAT method to flash rollback update to p20 with unlocked bootloader and locked frp (kinda like bricked) cuz i go to huawei customers support and they sayed if they flash me android 8.1 my phone will die?
Click to expand...
Click to collapse
Working dload archives should upgrade fine with your model's and cust's archives.
Working dload archives should downgrade fine with unlocked bootloader.
Only some users are reporting successfull dload downgrades WITH a locked bootloader on SHT and CMR for now. Most fails.

oslo83 said:
Working dload archives should upgrade fine with your model's and cust's archives.
Working dload archives should downgrade fine with unlocked bootloader.
Only some users are reporting successfull dload downgrades WITH a locked bootloader on SHT and CMR for now. Most fails.
Click to expand...
Click to collapse
My bootloader is unlocked but frp is locked, and im kinde of scary to do it cuz coustomer supp's told me that it gona die but i dont know how much they lied me cuz i dont think there is possible fail with dload methout.

cropp7 said:
My bootloader is unlocked but frp is locked, and im kinde of scary to do it cuz coustomer supp's told me that it gona die but i dont know how much they lied me cuz i dont think there is possible fail with dload methout.
Click to expand...
Click to collapse
Unlock the bootloader again and FRP will pe unlocked.

zgomot said:
Unlock the bootloader again and FRP will pe unlocked.
Click to expand...
Click to collapse
i can't re-lock it its gives me
FAILD [remote: risk] somthing like that i cant rember the all

Does it do the same if you UNLOCK?

zgomot said:
Does it do the same if you UNLOCK?
Click to expand...
Click to collapse
its giving me faild u need to unlock FRP but my frp is blocked cuz i accidentaly press restore deffaults in dev options and now my OEM Unlock options is untouchable

cropp7 said:
its giving me faild u need to unlock FRP but my frp is blocked cuz i accidentaly press restore deffaults in dev options and now my OEM Unlock options is untouchable
Click to expand...
Click to collapse
Sounds bad. I'm out of ideas, sorry.

zgomot said:
Sounds bad. I'm out of ideas, sorry.
Click to expand...
Click to collapse
No problem ty for trying im waithing the official andorid 9 update then customer supp sayed they will flash it.

Need help unlocking my Note 4

Hello,
I have a Sprint Galaxy Note 4 I'd like to unlock. I called sprint and got the unlocking code. I was to wait 72 hours for the phone to be fully unlocked. Then, I needed to swap my sprint SIM with a different network SIM, and the phone would prompt me to enter the code, and that would be it. Unfortunately, I received an email with the following message:
Letting you know your CPO SAM N910 WHT SNGL on line XXXXXXXXXX cannot be
unlocked due to programming restrictions associated with phones like
yours that were manufactured before February, 2015. You can try
providing your master subsidy lock (MSL) code XXXXXX to your new
carrier to find out if it will work on their network.
Keep in mind we can't guarantee your older phone will operate correctly
on another carrier's network. Each wireless provider determines whether
or not they will utilize the MSL code to reprogram a phone for use on
their network.
Click to expand...
Click to collapse
I put a different SIM in my phone, boot it up, and I get an invalid SIM error, but the phone does not prompt me to enter a code.
I have read and seen multiple Note 4, including the Sprint variant, being unlocked. Does anyone know what I need to do to unlock it?
Thanks

Aloupha said:
Hello,
I have a Sprint Galaxy Note 4 I'd like to unlock. I called sprint and got the unlocking code. I was to wait 72 hours for the phone to be fully unlocked. Then, I needed to swap my sprint SIM with a different network SIM, and the phone would prompt me to enter the code, and that would be it. Unfortunately, I received an email with the following message:
I put a different SIM in my phone, boot it up, and I get an invalid SIM error, but the phone does not prompt me to enter a code.
I have read and seen multiple Note 4, including the Sprint variant, being unlocked. Does anyone know what I need to do to unlock it?
Thanks
Click to expand...
Click to collapse
Use this tool to permanently unlock your device.
Download link for tool is in video description.
Screw the carrier
By this tool you can unlock all Samsung sprint devices.
https://youtu.be/tkrI7PTaZqA
Tool is free but watch carefully and follow instructions exactly as shown in video.
Let me know if it worked for you.

Trex888 said:
Use this tool to permanently unlock your device.
Download link for tool is in video description.
Screw the carrier
By this tool you can unlock all Samsung sprint devices.
https://youtu.be/tkrI7PTaZqA
Tool is free but watch carefully and follow instructions exactly as shown in video.
Let me know if it worked for you.
Click to expand...
Click to collapse
Thanks - it's kind of hard to follow the instructions. It's unclear what he is doing.
It would appears that you first place the phone in download mode. In his instruction, he attempted to do that, but the phone rebooted. Is this a necessary step? Then he put the phone in recovery mode. But after that, he doesn't show you want happens. He simply moves on to unlocking a different phone. Is simply putting the phone in recovery mode unlock it? I doubt it... do I click on the Unlock button while in download mode to unlock it? It's not clear

Aloupha said:
Thanks - it's kind of hard to follow the instructions. It's unclear what he is doing.
It would appears that you first place the phone in download mode. In his instruction, he attempted to do that, but the phone rebooted. Is this a necessary step? Then he put the phone in recovery mode. But after that, he doesn't show you want happens. He simply moves on to unlocking a different phone. Is simply putting the phone in recovery mode unlock it? I doubt it... do I click on the Unlock button while in download mode to unlock it? It's not clear
Click to expand...
Click to collapse
Follow these steps exactly
Before you begin you must have samsung usb drivers installed in your windows pc.
1 download cdma yemen tool that i mentioned in my earlier replies.
2 put your phone in adb mode by dialing ##3424# and choose adb+dm (very important)
3 reboot device
4 open tool and connect your device via usb cable (WATCH OUT CAREFULLY FOR ANY POP UP WINDOW ON YOUR PHONE YOU MUST ALLOW PERMISSION TO CONNECT DEVICE WITH TOOL.
5 inside tool click on port/adb and select your device.
6 choose your correct model N910P of you have Note 4 sprint.
6 click UNLOCK TAB in tool and wait until your device will reboot automatically.
thats it.
After reboot hopefully you have permanently unlocked device.
If your device successfully unlocked then dial ##3424# and select mtp+adb back to normal.
The guy is showing in video all the stuff that this tool can do so dont go to download mode or recovery or anything because that's for removing frp lock and other stuff.
Let me know if it worked for you.
By the way if you are on latest QI5 firmware i am not 100% sure this tool will work because QI5 has latest bootloader/modem and it's not easy to unlock.
If this tool did not work for you let me know i have workaround.
Good luck

Trex888 said:
Follow these steps exactly
Before you begin you must have samsung usb drivers installed in your windows pc.
1 download cdma yemen tool that i mentioned in my earlier replies.
2 put your phone in adb mode by dialing ##3424# and choose adb+dm (very important)
3 reboot device
4 open tool and connect your device via usb cable (WATCH OUT CAREFULLY FOR ANY POP UP WINDOW ON YOUR PHONE YOU MUST ALLOW PERMISSION TO CONNECT DEVICE WITH TOOL.
5 inside tool click on port/adb and select your device.
6 choose your correct model N910P of you have Note 4 sprint.
6 click UNLOCK TAB in tool and wait until your device will reboot automatically.
thats it.
After reboot hopefully you have permanently unlocked device.
If your device successfully unlocked then dial ##3424# and select mtp+adb back to normal.
The guy is showing in video all the stuff that this tool can do so dont go to download mode or recovery or anything because that's for removing frp lock and other stuff.
Let me know if it worked for you.
By the way if you are on latest QI5 firmware i am not 100% sure this tool will work because QI5 has latest bootloader/modem and it's not easy to unlock.
If this tool did not work for you let me know i have workaround.
Good luck
Click to expand...
Click to collapse
I am on QI5, and I didn't see a adb+dm option. I did see a DM + MODEM + ADM option under QUALCOMM USB SETTING (see attached screenshot), so I selected that.
The tool says Unlock Done With out Root... but it doesn't appear that the phone was indeed unlocked.
What's the workaround you have?

Aloupha said:
I am on QI5, and I didn't see a adb+dm option. I did see a DM + MODEM + ADM option under QUALCOMM USB SETTING (see attached screenshot), so I selected that.
The tool says Unlock Done With out Root... but it doesn't appear that the phone was indeed unlocked.
What's the workaround you have?
Click to expand...
Click to collapse
Yes DM+MODEM+ADM i was meaning.
The workaround i have is you have to flash Twrp RECOVERY and have to flash "ENG ROM" DONT FLASH ENG BOOTLOADER OR BASEBAND YOU WILL END UP UNKNOWN BASEBAND AND NULL IMEI.
Flash the rom from twrp and Also you have to flash supersu.zip to get full root with eng rom.
after that you have to use tool "Z3X SAMSUNG TOOLS PRO v27 or higher"
I cant share links here on xda for z3x because its heavily paid tool but if you search on youtube "z3x pro cracked" you will get 100s of videos with links to download.
HERE IS THE LINK FOR ENG ROM BY @freeza thanks to him.
https://forum.xda-developers.com/no...leakmm-sm-n910p-touchwiz-marshmallow-t3327350
After flashing eng rom the rom will take 35 minutes to boot so be patient and wait and also make sure battery is fully charged.
After that enable DM+MODEM+ADM as i mentioned earlier and you can unlock from z3x domestic use for american sim or unlock for international sim use.
Once phone is unlocked you must have to flash QI5 stock firmware via odin and do factory reset from stock recovery and dont worry the unlocking will stick permanently.
I personally did this method on QI5 ON my own device and it worked just fine.
I REPEAT DO NOT FLASH ENG BOOTLOADER OR MODEM OTHERWISE YOU WILL SCREW YOUR DEVICE COMPLETELY.
Cant explain more you got the idea i guess...
Good luck.

Trex888 said:
Yes DM+MODEM+ADM i was meaning.
The workaround i have is you have to flash Twrp RECOVERY and have to flash "ENG ROM" DONT FLASH ENG BOOTLOADER OR BASEBAND YOU WILL END UP UNKNOWN BASEBAND AND NULL IMEI.
Flash the rom from twrp and Also you have to flash supersu.zip to get full root with eng rom.
after that you have to use tool "Z3X SAMSUNG TOOLS PRO v27 or higher"
I cant share links here on xda for z3x because its heavily paid tool but if you search on youtube "z3x pro cracked" you will get 100s of videos with links to download.
HERE IS THE LINK FOR ENG ROM BY @freeza thanks to him.
https://forum.xda-developers.com/no...leakmm-sm-n910p-touchwiz-marshmallow-t3327350
After flashing eng rom the rom will take 35 minutes to boot so be patient and wait and also make sure battery is fully charged.
After that enable DM+MODEM+ADM as i mentioned earlier and you can unlock from z3x domestic use for american sim or unlock for international sim use.
Once phone is unlocked you must have to flash QI5 stock firmware via odin and do factory reset from stock recovery and dont worry the unlocking will stick permanently.
I personally did this method on QI5 ON my own device and it worked just fine.
I REPEAT DO NOT FLASH ENG BOOTLOADER OR MODEM OTHERWISE YOU WILL SCREW YOUR DEVICE COMPLETELY.
Cant explain more you got the idea i guess...
Good luck.
Click to expand...
Click to collapse
The URL for the ROM is dead. Do you by any chance have alternate URL?

Aloupha said:
The URL for the ROM is dead. Do you by any chance have alternate URL?
Click to expand...
Click to collapse
Here
https://mega.nz/#!vQ9VDJIS!Gv85h3Y3K44ym9BlRvNvJEfkiXHfO__AbJHElZycUnY
Btw try first the cdma yemen tool to.unlock with this rom with root. Maybe it can work.

It appears that I am not able to install TWRP... I install it via Odin from AP, and the install is successful. But when I try to boot into recovery, I get the stock recovery....
I tried TWRP 3.1.1 and 3.2.3... same thing. What am I not doing?

Aloupha said:
It appears that I am not able to install TWRP... I install it via Odin from AP, and the install is successful. But when I try to boot into recovery, I get the stock recovery....
I tried TWRP 3.1.1 and 3.2.3... same thing. What am I not doing?
Click to expand...
Click to collapse
Open odin and uncheck auto reboot in odin options
Choose AP and flash twrp
After Odin shows pass remove battery
Insert battery and Boot straight into twrp by volume up+home+ power
If your phone reboots after flashing twrp the system overwrites the stock recovery over twrp thats why you are losing twrp so do not reboot system after flashing twrp.
Once you booted into twrp then if will stick permanently and stock recovery will never show up.
If i was helpful then consider hit thumbs up on my replies.

Thanks! It took a while with multiple flashes, but I think it is fully unlocked now. I am able to put a Verizon SIM card in it and get no sim card error message.

Aloupha said:
Thanks! It took a while with multiple flashes, but I think it is fully unlocked now. I am able to put a Verizon SIM card in it and get no sim card error message.
Click to expand...
Click to collapse
Put sim card in phone then
Try dial ##72786# and press yes
Phone should reboot then you should get reception and.no sim massage won't show up.

Usure if anyone still using this. But I just got my phone unlocc using it on crikket/att. Unsure why you got a 7 wait but I was able to make phones and use internet immediately after I unlocc the phone. The only problem I'm facing is being able to use 4g o the phone.

Zaiaku said:
Usure if anyone still using this. But I just got my phone unlocc using it on crikket/att. Unsure why you got a 7 wait but I was able to make phones and use internet immediately after I unlocc the phone. The only problem I'm facing is being able to use 4g o the phone.
Click to expand...
Click to collapse
You won't get 4g/lte because n910p sprint note 4 is CDMA model and you need GSM model for 4g on at&t/cricket.

System Update Failed? Here is Possible Fix

This Is For those Who Stuck At Android 9 In WW Roms With ZS660KL Model
This Method Will Use Raw Firmware so there is risks if you do something wrong and maybe data loss so always backup​Bootloader Must Be Unlocked
How To Flash Raw Rom:​1-Bootloader Must be Unlocked! (To change fingerprint to ww and relock the bootloader to get OTA) If you are already on WW fingerprint this step aint needed or you want to stay on cn fingerprint just skip)
2-Install adb and fastboot
3-Download and extract the raw version you want i will give some below
4- reboot the phone to fastboot mode and connect it to the pc Use Side Port
5-in the raw firmware folder double click flashall_AFT.cmd This will take sometime and no progress will be shown so all you have to do is to wait till the phone reboot or get black screen if you got black screen just hold vol down and power button for some seconds
6-if your Fingerprint is cn Change it to WW With root explorer you can find posta about this step by step (skip this if you are already on WW Fingerprint)
Downloads:
Android 10:
https://drive.google.com/file/d/1NQI7SyCfPkBA15dVAim2yhEWD_6p0Kta/view
Android 9:
https://drive.google.com/file/d/16uIlYvFuXDEoRmtosqUwgVgM7aMdhaOp/view
Credits:
the custom droid site for the raw Firmwares
Some info:
After this method You will get ota updates if you relock bootloader
or you can install update zips from asus if you want to keep bootloader unlocked :silly:

You don't need to unlock the bootloader to flash the raw firmware. That is stupid to say you do..

joluke said:
You don't need to unlock the bootloader to flash the raw firmware. That is stupid to say you do..
Click to expand...
Click to collapse
The way you say stupid is stupid however mine didn't got flashed just rebooted when tried to flash the raw and couldn't update in system updates or zip files however having some respect ain't bad for your health.

shahram Ali said:
The way you say stupid is stupid however mine didn't got flashed just rebooted when tried to flash the raw and couldn't update in system updates or zip files however having some respect ain't bad for your health.
Click to expand...
Click to collapse
First of all, I just said it was a stupid thing to say because you don't need to unlock the bootloader and you must use the side USB c port to flash via fastboot. Second: learn to interpret proper English because I didn't offend anyone. End of conversation

joluke said:
First of all, I just said it was a stupid thing to say because you don't need to unlock the bootloader and you must use the side USB c port to flash via fastboot. Second: learn to interpret proper English because I didn't offend anyone. End of conversation
Click to expand...
Click to collapse
I mentioned the side port i don't write a paragraph about the phone as homework short and easy fix is the point there is nothing missing in the post so your reply wasn't necessary mate keep it cool :good:

How do I lock the bootloader after this?
I have some apps that wont work, whit the message "This app is not supported in rooted devices, please restore your device"
Thanks

Ricardo55467 said:
How do I lock the bootloader after this?
I have some apps that wont work, whit the message "This app is not supported in rooted devices, please restore your device"
Thanks
Click to expand...
Click to collapse
You will need to enter an command in fastboot mode but be aware backup every necessary things
If you didn't rooted or touched boot.img just use this command in fastboot and the bootloader will be locked again
fastboot oem asus-csc_lk

shahram Ali said:
You will need to enter an command in fastboot mode but be aware backup every necessary things
If you didn't rooted or touched boot.img just use this command in fastboot and the bootloader will be locked again
fastboot oem asus-csc_lk
Click to expand...
Click to collapse
What if I rooted?
I just followed all the instructions, I dont think I need my phone to be rooted, I dont want it to be rooted. gpay and some banking apps dont work.
I would like to get back to normal though and locked the boot loader, but keep my android 10 update.
I did all this just to update .

Ricardo55467 said:
What if I rooted?
I just followed all the instructions, I dont think I need my phone to be rooted, I dont want it to be rooted. gpay and some banking apps dont work.
I would like to get back to normal though and locked the boot loader, but keep my android 10 update.
I did all this just to update .
Click to expand...
Click to collapse
You'll need to flash stock boot img if your rom version (to remove root) before locking bootloader

Ricardo55467 said:
What if I rooted?
I just followed all the instructions, I dont think I need my phone to be rooted, I dont want it to be rooted. gpay and some banking apps dont work.
I would like to get back to normal though and locked the boot loader, but keep my android 10 update.
I did all this just to update .
Click to expand...
Click to collapse
Just reflash stock boot.img and you can use the command

Question Stuck on Fastboot (orange)

Hello
When trying to install a rom on Xiaomi.eu, my smart is stuck in orange Fastboot mode (and not with the rabbit)
I will explain in detail what I did and my problem.
I have my Xiaomi 11 Lite 5G NE 256go has the bootloader unlocked (no problem on this step)
I booted *TWRP* from my PC, I wanted to install it in my smart but it wouldn't (I forgot the error it made)
Despite this, I did a Format/Data and installed the rom "*xiaomi.eu_multi_MI11LE_XM11Lite5GNE_V13.0.3.0.SKOCNXM_v13-12*" but the procedure failed and after each restart, I only have the Fastboot mode (orange) which appears and I can no longer boot *TWRP *from a PC.
After that, here are the applications I tried to get out of this situation
Using
**_Xiaomi Unlock**: Following the recommendation of a youtuber, it's useless since the bootloader is already unlocked.
**_Xiaomi MiFlash**: By selecting the rom and the flash, it's does "*error "antirollback check error*"
**_XiaoMiTool V2**: During the flash procedure, it doesn't want to install the "*Flash super*" and by starting it again or skipping it, the whole installation is canceled.
This is what I have done so far.
I'll let you know if I have any news, hoping someone can help me.

SirM1! said:
Hello
When trying to install a rom on Xiaomi.eu, my smart is stuck in orange Fastboot mode (and not with the rabbit)
I will take advantage of this topic to avoid creating another one to explain in detail what I did and my problem
I have my Xiaomi 11 Lite 5G NE 256go has the bootloader unlocked (no problem on this step)
I booted *TWRP* from my PC, I wanted to install it in my smart but it wouldn't (I forgot the error it made)
Despite this, I did a Format/Data and installed the rom "*xiaomi.eu_multi_MI11LE_XM11Lite5GNE_V13.0.3.0.SKOCNXM_v13-12*" but the procedure failed and after each restart, I only have the Fastboot mode (orange) which appears and I can no longer boot *TWRP *from a PC.
After that, here are the applications I tried to get out of this situation
Using
**_Xiaomi Unlock**: Following the recommendation of a youtuber, it's useless since the bootloader is already unlocked.
**_Xiaomi MiFlash**: By selecting the rom and the flash, it's does "*error "antirollback check error*"
**_XiaoMiTool V2**: During the flash procedure, it doesn't want to install the "*Flash super*" and by starting it again or skipping it, the whole installation is canceled.
This is what I have done so far.
I'll let you know if I have any news, hoping someone can help me.
Click to expand...
Click to collapse
Try xiaomi.eu_multi_MI11LE_XM11Lite5GNE_V13.0.2.0.SKOCNXM_v13-12.fastboot.zip.
https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv13/
Phone in Fastboot mode
Extract the rom folder from the zip then run the first install.bat file.

I had the same problem and flashing that fastboot rom It fixed

NOSS8 said:
Try xiaomi.eu_multi_MI11LE_XM11Lite5GNE_V13.0.2.0.SKOCNXM_v13-12.fastboot.zip.
https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv13/
Phone in Fastboot mode
Extract the rom folder from the zip then run the first install.bat file.
Click to expand...
Click to collapse
Really thanks you, it's work

after an unsuccessful firmware of my device, it started to boot constantly in fastboot mode. when I try to restore via miflash and xiaomi tool v2, I get the error "Flash super error". how to solve this problem?
P.S. : sorry if something is written incorrectly, I wrote through a translator

Lxrmdr44in said:
after an unsuccessful firmware of my device, it started to boot constantly in fastboot mode. when I try to restore via miflash and xiaomi tool v2, I get the error "Flash super error". how to solve this problem?
P.S. : sorry if something is written incorrectly, I wrote through a translator
Click to expand...
Click to collapse
Post the Miflash log(Miflash folder/log)

Do it only if u have unlocked bootloader!!!!!
So download this rom xiaomi eu fastboot
https://sourceforge.net/projects/xiaomi-eu-multilang-miui-roms/files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv13/xiaomi.eu_multi_MI11LE_XM11Lite5GNE_V13.0.2.0.SKOCNXM_v13-12-fastboot.zip/download
Connect phone in fastboot to pc
And run windows fastboot first install with data format.bat
Your device now should work good
Do it fast before ur battery drain.
If u dont have unlocked bootloader u must use MiFlaSH Tool

boneszbo said:
Do it only if u have unlocked bootloader!!!!!
So download this rom xiaomi eu fastboot
https://sourceforge.net/projects/xiaomi-eu-multilang-miui-roms/files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv13/xiaomi.eu_multi_MI11LE_XM11Lite5GNE_V13.0.2.0.SKOCNXM_v13-12-fastboot.zip/download
Connect phone in fastboot to pc
And run windows fastboot first install with data format.bat
Your device now should work good
Do it fast before ur battery drain.
If u dont have unlocked bootloader u must use MiFlaSH Tool
Click to expand...
Click to collapse
Not only do you repeat what has already been said, but you say anything.
No, you cannot use MIFLASH with a locked bootloader.

So if u have lock bootloader u need Original Miui Rom for ur phone
U must download version what ur Phone got
Global, China or Eea Europe
U can check here what version should u Flash https://xiaomicheck.com/
If u have unlocked bootloader and flash custom rom and after OEM lock u brick ur phone and u must go to service. I pay 15Dollars to repair phone when i lock China Phone with EU Rom and lock bootloader.

NOSS8 said:
Try xiaomi.eu_multi_MI11LE_XM11Lite5GNE_V13.0.2.0.SKOCNXM_v13-12.fastboot.zip.
https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv13/
Phone in Fastboot mode
Extract the rom folder from the zip then run the first install.bat file.
Click to expand...
Click to collapse
Thanks a million bro i unbricked my fone