Related
So I was following the instructions for the root, and am at the TWRP part where I select the zip file I placed onto the drive. When I go to install I see a ton of listed folders, but can't seem to figure out where the heck the zip file is I put on the device, I had dropped it into the root. Any help with this? I can not post in any other forum.
JuJu142 said:
So I was following the instructions for the root, and am at the TWRP part where I select the zip file I placed onto the drive. When I go to install I see a ton of listed folders, but can't seem to figure out where the heck the zip file is I put on the device, I had dropped it into the root. Any help with this? I can not post in any other forum.
Click to expand...
Click to collapse
So you didn't put it into any of the folders? Scroll down the zip should be at the bottom. Otherwise reboot and recheck that the file downloaded.
evodon84 said:
So you didn't put it into any of the folders? Scroll down the zip should be at the bottom. Otherwise reboot and recheck that the file downloaded.
Click to expand...
Click to collapse
Here's the thing, I can't find ANY of the folders that are listed when I open the internal stoage on my PC. At the top of TWRP it says "Internal Storage (0mb)" The folders I see are boot, cache, data, datadata, dedv, emmc, etc, external_sd, internal_sd, license, proc, recovery, res, root, sbin, sd-ext,, sdcard, supersu, sys, system, tmp, sys system, tmp, usb-otg . So confused.
Sigh and when at the bootloader or whatever it looks like I don't have access to the internal storage via my computer. Just shows up as "Android" on my PC.
I "Copied log to SD", it says it copied it to /data/media. When I go into the file manager. That location doesn't exist. Nothing inside that data folder....at all.
Wow
While browsing around I found this posted by another user:
"Originally Posted by Iktwo View Post
Hi, I just registered cause I had the same problem and I wanted to help, did you installed twrp? I did, and then supersu but I was stuck at boot, then I got internal storage says 0mb, so I tried wiping data, didn't work I got some problem wiping cache, then I tried format data, it succeed, then I tried wiping data again, succeeded also, then I rebooted and I can use it again! I hope that works for you too."
And it did. Booted the device back up and all of a sudden all of the files are there. Root complete.
i have same problem
Hi i have a same problem, storage and sd card seem 0 MB and i can't start install, i can see any folder.
JuJu142 said:
While browsing around I found this posted by another user:
"Originally Posted by Iktwo View Post
Hi, I just registered cause I had the same problem and I wanted to help, did you installed twrp? I did, and then supersu but I was stuck at boot, then I got internal storage says 0mb, so I tried wiping data, didn't work I got some problem wiping cache, then I tried format data, it succeed, then I tried wiping data again, succeeded also, then I rebooted and I can use it again! I hope that works for you too."
And it did. Booted the device back up and all of a sudden all of the files are there. Root complete.
Click to expand...
Click to collapse
I didnt understand your problem really well. Try clicking in internal sd folder and you should see zip otherwise at the top of twrp where you select storage select again internal storage and it should popup if i understood correctly.
Hi,
I have the same problem, I tried the above steps with no luck. I still can't see the folders from internal storage. Please help.
Solution Identified
Ramm14 said:
Hi,
I have the same problem, I tried the above steps with no luck. I still can't see the folders from internal storage. Please help.
Click to expand...
Click to collapse
There is a folder by the name "0" which you can find in TWRP and also from the File explorer. Place the SuperSU.zip inside the "0" folder using file explorer and they try to locate it from the TWRP. It should be visible then.
It worked for me, hope it does for you too.
Thanks
Ram
Ramm14 said:
Hi,
I have the same problem, I tried the above steps with no luck. I still can't see the folders from internal storage. Please help.
Click to expand...
Click to collapse
I experienced a similar problem with my nexus 5x and ended up on this thread from google search. I got it working after entering the password at password prompt, when phone started to boot into recovery. This decrypted the storage and mounted it, before booting to recovery. If I didn't enter a password and skipped it(hit cancel and moved on), then in the recovery I see that storage and sdcard as 0.
Hope this helps someone.
ashmay88 said:
Got it working after entering the password at password prompt, when phone started to boot into recovery. This decrypted the storage and mounted it, before booting to recovery.
Hope this helps someone.
Click to expand...
Click to collapse
It díd help someone, me
I was doing the same thing, cancelling this password prompt, I thought it was a encryption thing instead of a decryption thing (should read better).
Now I can access all files again on TWRP, thanks!
EDIT: I thought a bit more why this happend: it is of course because we activated the option 'ask pattern unlock before booting android', which is an option in the Nexus 5X welcome screens.
So I assume TWRP needs that pattern as well to access the Android folders once it's activated.
Also: I had to click the '3x3' option in the Password screen to make the pattern responsive, in case that's a hint someone looks for.
flekkie said:
It díd help someone, me
I was doing the same thing, cancelling this password prompt, I thought it was a encryption thing instead of a decryption thing (should read better).
Now I can access all files again on TWRP, thanks!
EDIT: I thought a bit more why this happend: it is of course because we activated the option 'ask pattern unlock before booting android', which is an option in the Nexus 5X welcome screens.
So I assume TWRP needs that pattern as well to access the Android folders once it's activated.
Also: I had to click the '3x3' option in the Password screen to make the pattern responsive, in case that's a hint someone looks for.
Click to expand...
Click to collapse
Glad it helped.
Where did you see it asking for a password? I have booted into recovery and can't see any password prompt and the storage is still at 0mb. Help?
I had the problem.
I solved it by formating the data.
> fastboot format userdata
Do not forget to do a backup of your backup in your PC, then put it back and restore..!!
I have soft bricked my device, after reading your forums, I downloaded a stock ROM for my device... transferred it to my ext SD card but i couldnt find the RAR file in TWRP.(install) Even tried my luck with usb otg... i could see the rom (rar) file in file manager even copied it from ext SD to internal storage... i have double checked the location of the file... is on root it isny inside any folders. Pls help
Do what I said format the internal SD.
In your twrp format internal storage.
Then reboot and problem solved.
Help! Guys I cant locate my storage neither internal nor external sd card when i tried to install from recovery mode.How can I get access to internal external storage?
I have similliar problem twrp doesn`t see any files from my phone and it says that i have no os installed.
Sorry for my english.
ashmay88 said:
I experienced a similar problem with my nexus 5x and ended up on this thread from google search. I got it working after entering the password at password prompt, when phone started to boot into recovery. This decrypted the storage and mounted it, before booting to recovery. If I didn't enter a password and skipped it(hit cancel and moved on), then in the recovery I see that storage and sdcard as 0.
Hope this helps someone.
Click to expand...
Click to collapse
Hi having the same problem as others .... and did not succed (wipe format and all). YOu say to put a password ... but which password?????
claudioita said:
Hi having the same problem as others .... and did not succed (wipe format and all). YOu say to put a password ... but which password?????
Click to expand...
Click to collapse
Your password on your device probably
what password??
Hi,
my G3 and me have a small problem.
I wanted to update from official Cyanogenmod 12.1 to 13.0, backed up my data, etc.
First, there were tno Problems, but very fast battery drainage, and that my mSD card was now not "sdcard1" anymore but some numbers.
I tried fixing permissions in TWRP, had a bootloop. Updated TWRP (now 3.0.0 installed) and it worked somehow.
After one night it said process.acore quit unexpectedly. I had some crashes of the Google Play Services as well.
Then, it would boot, give me like 10 Seconds, and then jump to the boot screen of Cyanogenmod.
I tried to wipe data,system,dalvik. First there were problems with wiping dalvik, then there were problems with wiping system.
It says can't mount system: invalid argument. When looking around with twrp file explorer, the system folder is empty.
I would really appreciate your help!
You must check the partition type. Check if this as Ext4 or f2fs. In any case, try to repair the system of partitions from TWRP.
Okay, so:
Filesystem of /system is ext4
When trying to fix:
Repairing System using ef2fsck....
/sbin/e2fsck -fp /dev/block/mmcblk0p40 process ended with ERROR: 8
Unable to repair file system.
I assume it's because its ext4 and not f2fs?
btw I found something that may be important: when I try to wipe /cache, it takes forever.
Codagon said:
Okay, so:
Filesystem of /system is ext4
When trying to fix:
Repairing System using ef2fsck....
/sbin/e2fsck -fp /dev/block/mmcblk0p40 process ended with ERROR: 8
Unable to repair file system.
I assume it's because its ext4 and not f2fs?
btw I found something that may be important: when I try to wipe /cache, it takes forever.
Click to expand...
Click to collapse
Try to reinstall cyanogedmon 12.1 without wipes. Then, you enter again to the recovery and apply the wipes. I am not sure if for our model, cyanogedmon is compatible with the type of partitions f2fs and if is required a kernel with support for f2fs file system. You could try to changing the partitions (file system to f2fs), installing the rom and see if it starts but could cause a boot loop. Make a nandroid before making any changes.
cesarandres_8911 said:
Try to reinstall cyanogedmon 12.1 without wipes. Then, you enter again to the recovery and apply the wipes. I am not sure if for our model, cyanogedmon is compatible with the type of partitions f2fs and if is required a kernel with support for f2fs file system. You could try to changing the partitions (file system to f2fs), installing the rom and see if it starts but could cause a boot loop. Make a nandroid before making any changes.
Click to expand...
Click to collapse
Okay, i will try this tomorrow and then report back!
Thank you so far
Okay,
when trying to install the latest Snapshot of official CM, it just says ZIP File is corrupt. It said the same about an older build I still had on my PC.
When I try to flash the CM 13.0 build i had previously, TWRP just goes black and reboots (into recovery).
I also have to manually mount /system every time. If I try to mount /system again after dismounting it, it says 'failed to mount /system : Invalid Argument' .
This applies to all other partitions but the external SD Card.
When I try to change the file system to f2fs, it says OPeration successfull, but it didn't change anything, and the file system keeps being displayed as ext4.
Furthermore, i can't just 'Reboot Recovery' with TWRP- I have to take ot the Battery every time.
Codagon said:
Okay,
when trying to install the latest Snapshot of official CM, it just says ZIP File is corrupt. It said the same about an older build I still had on my PC.
When I try to flash the CM 13.0 build i had previously, TWRP just goes black and reboots (into recovery).
I also have to manually mount /system every time. If I try to mount /system again after dismounting it, it says 'failed to mount /system : Invalid Argument' .
This applies to all other partitions but the external SD Card.
When I try to change the file system to f2fs, it says OPeration successfull, but it didn't change anything, and the file system keeps being displayed as ext4.
Furthermore, i can't just 'Reboot Recovery' with TWRP- I have to take ot the Battery every time.
Click to expand...
Click to collapse
Why dont you start from the beginning.flash lp kdz through lg up then try installing cm 13.it might work for you.
jokerpappu said:
Why dont you start from the beginning.flash lp kdz through lg up then try installing cm 13.it might work for you.
Click to expand...
Click to collapse
I didn't want to lose my files
But it seems this is the only way soon- TWRP is giving me Error 7 when trying to flash CM 13.0. ....
:crying:
Codagon said:
I didn't want to lose my files
But it seems this is the only way soon- TWRP is giving me Error 7 when trying to flash CM 13.0. ....
:crying:
Click to expand...
Click to collapse
Which is your recovery version? If your recovery version is 3.0, you could try performing a downgrade of your recovery. If the errors persist, make an clean installation of the rom from LG Flash Tool (KDZ).
cesarandres_8911 said:
Which is your recovery version? If your recovery version is 3.0, you could try performing a downgrade of your recovery. If the errors persist, make an clean installation of the rom from LG Flash Tool (KDZ).
Click to expand...
Click to collapse
My Version is indeed 3.0. I had 2.8 before. Should I downgrade even further?
What would you recommend?
Besides:
I tried saving my files with the Terminal and [cp * /data/data/media/ /external_sd/Backup -r] and others, but it keeps giving me Zero-Byte Files.
Is this due to the Recovery version too?
You guys really are a big help! Thanks!
Codagon said:
My Version is indeed 3.0. I had 2.8 before. Should I downgrade even further?
What would you recommend?
Besides:
I tried saving my files with the Terminal and [cp * /data/data/media/ /external_sd/Backup -r] and others, but it keeps giving me Zero-Byte Files.
Is this due to the Recovery version too?
You guys really are a big help! Thanks!
Click to expand...
Click to collapse
I think that you try to save an empty folder. Use any backup applications to accomplish this. I have installed recovery twrp version 3 and I have no problem.
cesarandres_8911 said:
I think that you try to save an empty folder. Use any backup applications to accomplish this. I have installed recovery twrp version 3 and I have no problem.
Click to expand...
Click to collapse
Ok but doing it woth cp * /sdcard/WhatsApp it keeps doing the same.
The only thing that matters to me now are my WhatsApp Images
I was able to grab the chatlogs but not more.
Sometimes it even copies all pictures (Like 8.000 files) but all of them are 0-Bytes.
I will try the downgrade tomorrow.
Thank you so far!
Were you able to resolve this? I have an identical issue. I was playing CoC on my LS990 with CM13 before it went black and now it always boots in to twrp recovery 3.0. The only thing that mounts is the external sd card.
I've tried the following and all fail:
adb push cm13 and then install from recovery
adb sideload cm13
lg flash tool via firmware upgrade, roms:ZV4, ZV6, ZV8
Is the internal sd damaged? Please help XDA gods. Thanks
hi,
I bought a new redmi note 8 phone, unlocked the bootloader, installed TWRP .
Everything worked fine, until now. Now I want to backup my current modified stock ROM, but TWRP failes.
I got the problem very fast: TWRP can read all files and folders on the microSD car, but not in the internal storage folder.
Everything can be read by TWRP, except the sdcard folder.
Here he only shows strange names
something like:
Quote:
2h8P9lGY8I1A884LMsBjaA
2u+nb0LdBNopRSa5LehsvB
75aTrCvYkWG+R+lrcRz6WA
DcwYkwSKokq8Rm5lYc4YYC
Please help me
Reboot to recovery again and decrypt phone
eric00x said:
Reboot to recovery again and decrypt phone
Click to expand...
Click to collapse
How to decrypt permanent without losing data?
Ahmad5544 said:
How to decrypt permanent without losing data?
Click to expand...
Click to collapse
to decrypt phone :
Make sure you have a backup of your data copied in PC.
- In TWRP go to Wipe and select Format Data(don't go to advanced). Type yes and format data. [This process will format all your internal so make sure your data is backed up].
- Go back to TWRP home and Reboot > Recovery (Don't reboot system).
- Flash this zip.
- Reboot > System.
unfortunately there's no way to decrypt without losing data. Also if you're on a decrypted device then you have to format data everytime you flash any rom or update your current miui rom..I suggest using orangefox recovery to prevent this in future. Follow this guide for orangefox recovery.
I was attempting to install the Begonia Recovery Project for Miui 12.5 (android 11) using the fastboot method. But when I reboot into this new recovery and look inisde the "install" tab, all my folders from my main storage are made up of random letters and numbers.
I assume that this means that my files are still encrypted but I am not sure how to decrypt them.
I am running MIUI 12.5.3 Global edition on android 11 and the Begonia Recovery Project version I downloaded and installed was from this website : https://www.pling.com/p/1556862/
Furthermore, I have a unlock pattern on my phone but when I boot into the custom recovery, it doesn't ask me for my unlock pattern. Could this be the reason all my files are named with random letters and numbers?
It won't let me boot back into my operating system and when I try, I get an warning saying "No OS Installed! Are you sure you wish to reboot?". Rebooting leads me right back into the custom recovery, with all files still named with random characters.
I would prefer to be able to boot back into my system without having to lose any of my personal files on my phone (if that is possible).
Any help is greatly appreciated and I thank you in advance
Sqorpz said:
I was attempting to install the Begonia Recovery Project for Miui 12.5 (android 11) using the fastboot method. But when I reboot into this new recovery and look inisde the "install" tab, all my folders from my main storage are made up of random letters and numbers.
I assume that this means that my files are still encrypted but I am not sure how to decrypt them.
I am running MIUI 12.5.3 Global edition on android 11 and the Begonia Recovery Project version I downloaded and installed was from this website : https://www.pling.com/p/1556862/
Furthermore, I have a unlock pattern on my phone but when I boot into the custom recovery, it doesn't ask me for my unlock pattern. Could this be the reason all my files are named with random letters and numbers?
It won't let me boot back into my operating system and when I try, I get an warning saying "No OS Installed! Are you sure you wish to reboot?". Rebooting leads me right back into the custom recovery, with all files still named with random characters.
I would prefer to be able to boot back into my system without having to lose any of my personal files on my phone (if that is possible).
Any help is greatly appreciated and I thank you in advance
Click to expand...
Click to collapse
This is the reason why everyone recommends taking a backup of your files and resetting your device prior to such attempts. Unfortunately, most likely you will lose part, if not all of your files.
That No OS Installed error is normal since MIUI is a system on root OS and TWRP isn't able to detect them.
That random named folders is your internal storage but it's encrypted. You'll need to enter your passcode every time you boot to TWRP. If it doesn't ask you go to Mount and select Decrypt Data
To disable encryption you'll need to format data and install Disable ForceEncrypt. Doing this will erase EVERYTGHING. (except Find Device,IMEI's etc)
I would recommend you to install this TWRP to decrypt them.
If your device boots back to TWRP, it might be triggering Rescue Party. (click the 3rd button on the bottom of the screen to view the logs)
Fytdyh said:
This is the reason why everyone recommends taking a backup of your files and resetting your device prior to such attempts. Unfortunately, most likely you will lose part, if not all of your files.
Click to expand...
Click to collapse
I had installed twrp like this before and never had this type of error. But yes, the smart thing would definately be to always have backups. Lesson learned for next time!
Canny1913 said:
That No OS Installed error is normal since MIUI is a system on root OS and TWRP isn't able to detect them.
That random named folders is your internal storage but it's encrypted. You'll need to enter your passcode every time you boot to TWRP. If it doesn't ask you go to Mount and select Decrypt Data
To disable encryption you'll need to format data and install Disable ForceEncrypt. Doing this will erase EVERYTGHING. (except Find Device,IMEI's etc)
I would recommend you to install this TWRP to decrypt them.
Click to expand...
Click to collapse
Thank you for the fast reply.
I installed the twrp that you recommended. TWRP still isn't asking for my passcode and I can't find a "Decrypt Data" option in the Mount section. The only checked options in Mount are "Data", "Cache", and "Micro SD Card".
Is Disable ForceEncrypt needed in order to be able to boot back into my operating system? Is there any way to boot back into my OS without this?
Thanks again for the fast reply!
Sqorpz said:
Thank you for the fast reply.
I installed the twrp that you recommended. TWRP still isn't asking for my passcode and I can't find a "Decrypt Data" option in the Mount section. The only checked options in Mount are "Data", "Cache", and "Micro SD Card".
Is Disable ForceEncrypt needed in order to be able to boot back into my operating system? Is there any way to boot back into my OS without this?
Thanks again for the fast reply!
Click to expand...
Click to collapse
That zip can only be used if your data is formatted. If you flash it without formatting data you'll be making the situation even worse because it won't allow you to decrypt anymore. (it makes the phone think data isnt encrypted tho it clearly is encrypted)
Also did you check the logs as i suggested to determine the reason why the phone is not booting?
Canny1913 said:
That zip can only be used if your data is formatted. If you flash it without formatting data you'll be making the situation even worse because it won't allow you to decrypt anymore. (it makes the phone think data isnt encrypted tho it clearly is encrypted)
Also did you check the logs as i suggested to determine the reason why the phone is not booting?
Click to expand...
Click to collapse
Whoops, I used the twrp you recommended without formatting the data. Does this mean my data is forever undecryptable?
I checked the logs and indeed it is triggering the Android Rescue Party.
It suggests possible solutions that are
wipe caches, and/or
Format data, and/or
Clean-flash your ROM.
The reported problem is :
'--reason=enablefilecrypto_failed'
Sqorpz said:
Whoops, I used the twrp you recommended without formatting the data. Does this mean my data is forever undecryptable?
I checked the logs and indeed it is triggering the Android Rescue Party.
It suggests possible solutions that are
wipe caches, and/or
Format data, and/or
Clean-flash your ROM.
The reported problem is :
'--reason=enablefilecrypto_failed'
Click to expand...
Click to collapse
No i didnt meant that, i said the Disable ForceEncrypt zip needs data to be formatted.
The reported problem unfortunately means your phone cannot setup encryption. (thats why twrp won't decrypt it)
The only solution is to format data to make the phone usable again.
(you might as well flash the disable encryption zip after formatting the data since encryption on android is a pain in the ass and it makes the phone a bit faster)
By the way, do not wipe data, just click Format Data and format it since it doesn't get rid of the encryption properly.
T
Canny1913 said:
No i didnt meant that, i said the Disable ForceEncrypt zip needs data to be formatted.
The reported problem unfortunately means your phone cannot setup encryption. (thats why twrp won't decrypt it)
The only solution is to format data to make the phone usable again.
(you might as well flash the disable encryption zip after formatting the data since encryption on android is a pain in the ass and it makes the phone a bit faster)
By the way, do not wipe data, just click Format Data and format it since it doesn't get rid of the encryption properly.
Click to expand...
Click to collapse
Thank you so much for your informative responses.
Apologies, I thought you meant that flashing different twrp would lead to undecryptable files.
By formatting data do you mean the parition on my phone called "data"?. I forgot to add that files in my "data" folder have sensible names and don't look encrypted. Is it normal for it to just encrypt my internal storage?
By the sounds of it, I think I will proceed with your suggestion of formatting the data. Just to clarify, will this method also remove everything in my internal storage, eg pictures, music, videos?. Is there a way to continue with this method without having to lose those?
I appreciate your help greatly.
Sqorpz said:
Thank you so much for your informative responses.
Apologies, I thought you meant that flashing different twrp would lead to undecryptable files.
By formatting data do you mean the parition on my phone called "data"?. I forgot to add that files in my "data" folder have sensible names and don't look encrypted. Is it normal for it to just encrypt my internal storage?
By the sounds of it, I think I will proceed with your suggestion of formatting the data. Just to clarify, will this method also remove everything in my internal storage, eg pictures, music, videos?. Is there a way to continue with this method without having to lose those?
I appreciate your help greatly.
Click to expand...
Click to collapse
They actually encrypted the whole partition till Android 10. This required you to enter a password before the phone boots up but now they only encrypt the internal storage,apps and app data so you don't have to enter a password anymore before the phone boots-up.
Yes formatting the data will erase everything on your device including the internal storage.
Because they are encrypted just like the other part of data there's no way to save them.
Canny1913 said:
They actually encrypted the whole partition till Android 10. This required you to enter a password before the phone boots up but now they only encrypt the internal storage,apps and app data so you don't have to enter a password anymore before the phone boots-up.
Yes formatting the data will erase everything on your device including the internal storage.
Because they are encrypted just like the other part of data there's no way to save them.
Click to expand...
Click to collapse
I see. So could this have been avoided if I had flashed the twrp after disabling my password? Is it a smart practice to disable your password before doing stuff like flashing a custom recovery?
Obviously losing all my data and internal storage is definately a kick in the nuts. But it is also my fault for not backing up my data before experimenting like this.
Could you please send me an oultine of the steps I need to follow in order to proceed with your method of getting my phone working again. Frankly, I have little experience in this area and I'm afraid i'll make a mistake in the process. I also trust in your expertise and experience far greater than mine.
Thank you again!
Sqorpz said:
I see. So could this have been avoided if I had flashed the twrp after disabling my password? Is it a smart practice to disable your password before doing stuff like flashing a custom recovery?
Obviously losing all my data and internal storage is definately a kick in the nuts. But it is also my fault for not backing up my data before experimenting like this.
Could you please send me an oultine of the steps I need to follow in order to proceed with your method of getting my phone working again. Frankly, I have little experience in this area and I'm afraid i'll make a mistake in the process. I also trust in your expertise and experience far greater than mine.
Thank you again!
Click to expand...
Click to collapse
Simple, enter TWRP, go to Wipe, click Format Data, type yes then hit enter. Your data will be wiped. reboot the phone in Recovery mode (not to the normal OS or else the phone will encrypt again) again so the internal storage gets created.
Plug your phone into a PC, download this:https://zackptg5.com/downloads/archive/Disable_Dm-Verity_ForceEncrypt_11.02.2020.zip
copy it to your phone and install it. If you want to use Magisk, install Magisk first then this zip file. The encryption will be completely disabled.
To answer your first question, It wasn't your fault because i have no idea why your storage got corrupted in the first place but you should definitely disable the password (or disable the encryption if you want to use a password) before doing anything.
Canny1913 said:
Simple, enter TWRP, go to Wipe, click Format Data, type yes then hit enter. Your data will be wiped. reboot the phone in Recovery mode (not to the normal OS or else the phone will encrypt again) again so the internal storage gets created.
Plug your phone into a PC, download this:https://zackptg5.com/downloads/archive/Disable_Dm-Verity_ForceEncrypt_11.02.2020.zip
copy it to your phone and install it. If you want to use Magisk, install Magisk first then this zip file. The encryption will be completely disabled.
To answer your first question, It wasn't your fault because i have no idea why your storage got corrupted in the first place but you should definitely disable the password (or disable the encryption if you want to use a password) before doing anything.
Click to expand...
Click to collapse
Since I am reseting my phone to its factory settings, I researched into some ROMs that I may use instead of MIUI. I came across the Pixel Experience ROM and I'm considering installing it.
I read somewhere that flashing a ROM involves having to disable encryption every time you flash a new ROM or something along those lines. Will installing the Disable ForceEncrypt disable encryption permanently or will I have to considering installing it again if I want to flash the Pixel Experience ROM?
Sqorpz said:
Since I am reseting my phone to its factory settings, I researched into some ROMs that I may use instead of MIUI. I came across the Pixel Experience ROM and I'm considering installing it.
I read somewhere that flashing a ROM involves having to disable encryption every time you flash a new ROM or something along those lines. Will installing the Disable ForceEncrypt disable encryption permanently or will I have to considering installing it again if I want to flash the Pixel Experience ROM?
Click to expand...
Click to collapse
You will have to install it again if you install a new ROM or kernel since it modifies both of them (they both get wiped if you install or update the ROM.
I recommend you follow their install guide since a lot of people get confused when they see errors.
Flashing PE A12
1. Flash latest Firmware. 2. Flash latest Dynamic TWRP. 3. Reboot to Dynamic TWRP. 4. Flash latest PE rom zip and then format data. 5. Reboot and enjoy. Links Here: Dynamic TWRP: TWRP For A12 Note: If you see any red line errors on twrp just ignore them and continue flashing. Also before...
telegra.ph
Canny1913 said:
You will have to install it again if you install a new ROM or kernel since it modifies both of them (they both get wiped if you install or update the ROM.
I recommend you follow their install guide since a lot of people get confused when they see errors.
Flashing PE A12
1. Flash latest Firmware. 2. Flash latest Dynamic TWRP. 3. Reboot to Dynamic TWRP. 4. Flash latest PE rom zip and then format data. 5. Reboot and enjoy. Links Here: Dynamic TWRP: TWRP For A12 Note: If you see any red line errors on twrp just ignore them and continue flashing. Also before...
telegra.ph
Click to expand...
Click to collapse
Thank you for all your help. It was probably simple and easy for you but for me, I had no idea what I was doing and would never have done the steps that you suggested so thank you. I really appreciate all the help you've given me.
I just have one last request that is : do you know any good backup services for android? I know about services like google photos for backing up photos and videos, but I was wondering if there were any that backed up the android as a whole, including app data/progress, photos, videos, notes etc.
Thank you again for all your support and making this process very simple and easy and wish you all the best.
Sqorpz said:
Thank you for all your help. It was probably simple and easy for you but for me, I had no idea what I was doing and would never have done the steps that you suggested so thank you. I really appreciate all the help you've given me.
I just have one last request that is : do you know any good backup services for android? I know about services like google photos for backing up photos and videos, but I was wondering if there were any that backed up the android as a whole, including app data/progress, photos, videos, notes etc.
Thank you again for all your support and making this process very simple and easy and wish you all the best.
Click to expand...
Click to collapse
Google One app can backup photos,SMS, phone call history and redownloads all of the apps (except apps that were installed from an apk file)
Pixel Experience actually bypasses the Google Photos storage limit so you can backup your entire gallery without problems.
For notes just use Google Keep, it syncs the notes to your Google account.
App data can be backed up by Titanium Backup or Migrate. (i suggest you test them before backing up your entire app data as suggested by Migrate developer)
I don't exactly recommend backing up Data as a whole since your only option is TWRP and TWRP loves to complain when it comes to backing up and restoring.
Thanks for the best wishes and i wish you all the best too. Have a good one.
Hello,
this is somewhat similar to this thread, but there are no answers and I have a bit of a different problem at the moment.
I've been using official LOS 17.1 for some time on my Note 8T, but it started to get slow, so I decided to upgrade my android version and test the latest features. I downloaded xiaomi firmware and A13 ROM, flashed them, made a full wipe and... here is where my problems started. Please don't school me here - I'm pretty sure that I messed up, I'm just looking for possible solutions.
What happened?
My phone had an encrypted data partition and as I read later, it was pretty normal that A12 installation messed it. The recovery (regardless of the version) has stopped prompting me to give the encryption password, instead it was mounting the internal drive encrypted. I tried to downgrade android version to 10 (both LOS and MIUI), but I had bootloop bringing me back to recovery. I tried decrypting it via ADB, but it didn't work. Since I need my phone, I made a backup of the whole internal storage with ADB and I have it in .img form on my hard drive. Since I've never encountered any problems like this, I wasn't prepared for losing all of my data, especially pictures and Signal archive, so I'm wondering - what can I do to try to get my data back, giving I have the full memory dump and I know the password used for en/decrypting it?
Thanks in advance, I spent hours looking for an answer, but I don't feel like getting close to the solution.
reip said:
Hello,
this is somewhat similar to this thread, but there are no answers and I have a bit of a different problem at the moment.
I've been using official LOS 17.1 for some time on my Note 8T, but it started to get slow, so I decided to upgrade my
Click to expand...
Click to collapse
Encryption is effective if you protect your phone with a password or schema etc on the lock screen.
You cannot restore data from an AOSP rom to a MIUI rom and vice versa.
The backup will only work with the same rom as the backup.
So if i have a filesystem that was encrypted on lineage os 17.1, i should make a clean install of it and then try to push the whole .img backup through adb?
reip said:
So if i have a filesystem that was encrypted on lineage os 17.1, i should make a clean install of it and then try to push the whole .img backup through adb?
Click to expand...
Click to collapse
Same rom, same password, not 100% guaranteed that it works.
reip said:
.
Click to expand...
Click to collapse
Since you have a backup try flashing DFE
let me know if it work
loopypalm said:
Since you have a backup try flashing DFE
let me know if it work
Click to expand...
Click to collapse
the problem is i pulled the whole mmcblk0 dump with adb, which gives me more than twenty partitions in the .img file (I can easily say which one is the /sdcard one because of the size) and I am not sure if pushing the whole image with incorrect rom won't bring me to the exact state i was in before. Is there a way to push a particular partition from a .img file or should i try to push everything and flash dfe, as you're saying?
reip said:
the problem is i pulled the whole mmcblk0 dump with adb, which gives me more than twenty partitions in the .img file (I can easily say which one is the /sdcard one because of the size) and I am not sure if pushing the whole image with incorrect rom won't bring me to the exact state i was in before. Is there a way to push a particular partition from a .img file or should i try to push everything and flash dfe, as you're saying?
Click to expand...
Click to collapse
if the partitions inside are .IMG file you can restore with orangefox
pick the img and set the target to restore
restore just data 1st then DFE then wipe cache+dalvik then reboot and pray
loopypalm said:
if the partitions inside are .IMG file you can restore with orangefox
pick the img and set the target to restore
restore just data 1st then DFE then wipe cache+dalvik then reboot and pray
Click to expand...
Click to collapse
This sounds like a plan, but to which partition should I flash it? I don't see 'data' option there.
+ just to make sure, do I have to reflash and set up the exact rom and password I was on when I had the encryption working before I start the operation you're suggesting?
reip said:
This sounds like a plan, but to which partition should I flash it? I don't see 'data' option there.
+ just to make sure, do I have to reflash and set up the exact rom and password I was on when I had the encryption working before I start the operation you're suggesting?
Click to expand...
Click to collapse
aah, i forgot it don't have data as target
but there must be a way using ADB
-if you are going to restore the whole backup = no need to recreate the same conditions you did before
-if you are going to restore just the userdata backup = recreate the same conditions
in both cases format DATA is important (format nt wipe then reboot to recovery)
loopypalm said:
aah, i forgot it don't have data as target
but there must be a way using ADB
-if you are going to restore the whole backup = no need to recreate the same conditions you did before
-if you are going to restore just the userdata backup = recreate the same conditions
in both cases format DATA is important (format nt wipe then reboot to recovery)
Click to expand...
Click to collapse
so format data, restore, flash DFE, reboot?
reip said:
so format data, restore, flash DFE, reboot?
Click to expand...
Click to collapse
yes