{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
Code:
[B][SIZE="3"]Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
You are at your own if anything happens due to slightly high mA while charging
Please read completely this thread before using for minimize FAQ.
If you coming from other custom kernel, please restore to stock boot.img or dirty flash your rom before flash this!
[/SIZE][/B]
PBH: Project Beyond Horizon that started as a interactive governor tweaks project for my previous device, and gradually turned into a Kernel for that device, now is presently developed for our Own Zenfone Max Pro. I am just a beginner to developement, but with a desire to learn. My main focus is stabilty and optimal performance and battery backup. We will together make this kernel better and for that i need your constructive feedbacks/suggestion
Requirements
BACKUP your Boot.img and ROM Before flash this Kernel.
Unlocked Bootloader as well
Latest TWRP
Wipe dalvik/art cache is suggested(not mandatory)
Latest Build Features
Less features with more focus on battery backup and stablity
THis is one of my most personal favourite build with lots of Changes that should suit Practically every Usage Scenario and the most tested build ever with extremely varied usage scenario. And the end results was.. All the testers were satisfied
Changelog :
- • Optimised thermal throttling while charging. Device will no longer be bumped too high while charging. It will be slow and steady progression while will be slower bump than previous builds
• Optmised thermal efficiency while usage. Device will stay cooler now
• Merged Latest Caf Tag in Kernel
• Smoothness Improved. Lesser Janks than previous builds
Batterty Backup Profile For Kernel Auditor Users Is Updated, You can use with v14 profile alongside to more Battery Backup
Download KERNEL : https://sourceforge.net/projects/beyond-horizon/files/Asus%20Zenfone%20Max%20Pro%20M1/
EX Kernel Profile is dropped since most users use Darkness Kernel Auditor and Its free to use.
Priority: Stablity(Battery Backup) >>>> Plethora of placebo/ user unused features.
Downloads
[/COLOR][/I]
TELEGRAM SUPPORT Well I Find XDA is enough, however the telegram is more convinient for running the beta tests for my kernel and since lot many of you have requested, Here are the general support and testing channel You guys can refer. I regularly post their for beta testing to keep the developement alive :laugh:
1 GROUP
2 Channel
XDA:DevDB Information
PBH, Kernel for the Asus ZenFone Max Pro M1
Contributors
Nikish21
Source Code: https://github.com/Nikish21/PBH-eas
Kernel Special Features: interactive governor tweaks, underclocked
Version Information
Status: Stable
Current Stable Version: 22
Stable Release Date: 2019-07-22
Created 2018-08-05
Last Updated 2019-09-01
Q: How is the Battery Backup?
Ans: It depends on usage. But everything possible from kernel side is already /will be implemented regarding idle drain. Interactive governor is tweaked to use the cpu based on load
Q; Do you plan to implement more features
Ans: I am open to suggestions. But only those will be implemented that enhances end-user's stability with this kernel(performance+battery backup)
Q: How to report Bugs?
Ans: You can report here with proper log or can contact me on Telegram for faster reply das_nikish
Reserved for Changelog
v22 CLICK HERE
v21 CLICK HERE
v20 CLICK HERE
v19 CLICK HERE
v18- CLICK HERE
v14 - CLick here
v12.1 CLICK HERE
v12 CLICK HERE
v11 - CLICK HERE
v10- Click HERE
v9 - Click HERE
v8 - Click HERE
v7 - Click HERE
v6 - Click HERE
v5.1 Click Here
v5- Click HERE
v4 - Click HERE
v3.1-Click Here
v3-Click Here
v2- Click Here
V1-Initial Release
are any cores underclocked or only set for a minimum frequency?
can i use any kernel auditor?
which Toolchain is used?
kenway66 said:
are any cores underclocked or only set for a minimum frequency?
can i use any kernel auditor?
which Toolchain is used?
Click to expand...
Click to collapse
THe mentioned cores on Op are already underclocked upto 300 MHz for both cluster.
Yes , you can use kernel auditor/ Ex kernel manager
I have used gcc 4.9. But next build might be shipped with clang.:silly::silly::silly:
Use the kernel and give your feedback
How to flash. Plz tell me step by step
sourav.r said:
How to flash. Plz tell me step by step
Click to expand...
Click to collapse
install zip using twrp
zzapz said:
install zip using twrp
Click to expand...
Click to collapse
Thnk u ?
Awesome first kernel.
Soon will be try
Thnks brother
Flashed it!
No issues or bootloops.
Using darkness control kernel auditor ( ss attatched)
Will test it and update regarding the battery stats and deep sleep drain.
Flashed it !
No issues or bootloops.
Will test it and update on the battery backup.
Used darkness control kernel auditor to set cpu min Freq to 300mhz for both big and little cores.
One question, can we set min and Max frequencies of little and big cluster. Some kernels shipped with custom ROMs ain't allowing us to change min Freq of little cluster at all. Infact it automatically becomes equal to Max frequency after few seconds in those ROMs.
Also, can we set gpu frequencies too?
Thanks.
fingerprint controling ring volume
kernal is awesome but after installing this kernal my finger print scaner is controling ringing volume when i touch finger print sensor it decrease my ring volume i am using stock rom
how to solve??
handsome_94 said:
One question, can we set min and Max frequencies of little and big cluster. Some kernels shipped with custom ROMs ain't allowing us to change min Freq of little cluster at all. Infact it automatically becomes equal to Max frequency after few seconds in those ROMs.
Also, can we set gpu frequencies too?
Thanks.
Click to expand...
Click to collapse
Yes you can set min and Max freq for big and little cluster using kernel auditor or any similar apps from playsotre
Hi...good kernel support for android p..but the small min frequency sudden jump the same fre as the small max frequency.. can dev to fix that? Sometimes it got buzzing sound tq
1. Is it stable and safe like stock kernel
3. Using this kernel I don't need alps like greenify, naptime , etc or I need those too
4. Will battery saving reflect on performance while playing games
5.i don't have to do anything manual right just flash kernel and use right (because I don't know)
PBH V2 IS OUT
. Check the download folder in OP
ANDROID PIE COMPATIBLE
1.Merge Latest Caf Tag : LA.UM.6.2.r1-10500-sdm660.0.xml
2. Upstreamed to 4.4.147
3. Fixed frequency stuck issue. After boot wait for few minutes for the frequency bump to get back to normal
4. 300 MHz for both cluster is hardlimited for better battery backup ( feedback needed)
5. BCL Hotplug is set to 5% so that it doesn't offline cores at low battery
6.Sound improvement: More cleaner and less saturated bass on headphone and earpiece. (Feedback needed)
7. Idle power collapse for improvement to deep sleep
Enjoy ??????
Any chance to speed up battery charging when we use quick charger ?
Nikish21 said:
PBH V2 IS OUT
. Check the download folder in OP
ANDROID PIE COMPATIBLE
1.Merge Latest Caf Tag : LA.UM.6.2.r1-10500-sdm660.0.xml
2. Upstreamed to 4.4.147
3. Fixed frequency stuck issue. After boot wait for few minutes for the frequency bump to get back to normal
4. 300 MHz for both cluster is hardlimited for better battery backup ( feedback needed)
5. BCL Hotplug is set to 5% so that it doesn't offline cores at low battery
6.Sound improvement: More cleaner and less saturated bass on headphone and earpiece. (Feedback needed)
7. Idle power collapse for improvement to deep sleep
Enjoy ??????
Click to expand...
Click to collapse
It's showing Sd card corrupted even after reboot. Im using exfat and cannot change it to fat32 coz then i'll not be able to do nandroid backup so plz fix this issue if it is related to exfat.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
Some points to note-
Added msm_hotplug hotplugging driver
Thermal control driver by @franciscofranco
XZ compression
Disabled crc check
Task adj rbtree optimization from Motorola
Memcpy, memmove optimization from Motorola
Compiled using latest Linraro 4.9 optimized for Cortex A15
Anykernel script
Latest KCAL control driver
CPU Power driver and updated ARM typology
Overall CPU stats
Disabled crc check
Powersuspend driver
USB Fast Charge
Fixed simple_ondemand GPU governor
Added Conservative GPU governor with many more patches to devfreq
Voltage Control
Stereo call recording support
Entropy tweaks
TCP, KGSL and many many many more patches
CPUFREQ tweaks
Power efficient workqueues for almost everthing
SCHED tweaks
futex patches
exFat support
Sound Control 3.2
Added SIO, FIOPS, BFQ and TripNDroid I/O schedulers
Tweaked existing I/O schedulers
fsync
Added intelliactive and elementalx governors
Tick, time patches
Vibrator Strength Control
...also much more stuff which I can't write here because I don't want to spam. Go to github and check yourself.
Issues-
-You tell.
Instructions-
No support for MIIUI
AOSP tagged zip is only and only for Ivan's AOSP, all other ROM users please use CM tagged zip
First flash a ROM if you haven't already as kernel is not provided in form of a boot.img
Flash zip through recovery
DO NOT POST BUG REPORTS IF YOU DIDN'T FLASH KERNEL ON A CLEAN INSTALL.
Controls for every feature can be found in Kernel Auditor app
Download-
http://forum.xda-developers.com/devdb/project/?id=9618#downloads
GPL Compliance:
Just a statement regarding kernel source: The Kernel Source is of course covered under GPL version 2. Free software does NOT mean no work or time was spent working on it. I have donated a large sum of my free time to this kernel. If you want to include my kernel in your project or use my source code, please mention it in your post, give proper credits.
Opensource does not mean 'Out-of-credit'
Thank you.
NOTE TO MODERATORS- OT is allowed in this thread. Only warn users or delete posts when they start to become uncivil with each other.
XDA:DevDB Information
Phantom Kernel, Kernel for the Xiaomi Mi 3
Contributors
Shivam Kuchhal
Source Code: https://github.com/shivamk11/android_kernel_xiaomi_cancro
Kernel Special Features:
Version Information
Status: Stable
Created 2015-05-05
Last Updated 2015-05-29
Recommended Kernel settings
Use Kernel Adiutor app for making all changes.
CPU:
Governor- Interactive(for balance) or elementalx(for performance)
Multicore Power Saving- Aggressive
Rest untouched.
CPU Voltage:
-50mV all frequencies
CPU Hotplug:
Turn MP Decision off if it isn't already and turn msm_hotplug on. You can leave tunables as it is or make your required changes.
I keep 1036Mhz as maximum screen off frequency
GPU:
GPU Governor- simple_ondemand
Screen:
Do whatever suits you best
I keep saturation at somewhere between 50 and 60. And screen value and contrast at 130.
Sound:
Use FauxSound app for making changes, our version of sound control is old and buggy.
Battery:
Force Fast Charge- on
I/O Scheduler:
Scheduler- bfq/row/sio
Whichever you find best
Misc Controls:
TCP Congestion Algorithm- westwood
Reserved
Credits-
fuax123 for Sound Control
flar2 for elementalx governor
Mi3 developers for base
and all others I missed
Also I am not an "original" coder, I take stuff from everywhere and add stable stuff and also make fixes to make a good kernel. You have a problem? Sorry, I don't care.
Can u detailed about power efficiency patches from nvidia ??
Seems interesting
I still remember the days when we demanded for custom kernels.. and now, they just freaking pop up from anywhere! XD Will try this soon too!
Well done bro, Another Kernel to try, Flashing soon & will report back in evening.
Jhayzt said:
I still remember the days when we demanded for custom kernels.. and now, they just freaking pop up from anywhere! XD Will try this soon too!
Click to expand...
Click to collapse
+1
I didn't notice that ElementalX is included in this kernel. Want the best gaming settings? ElementalX + SIO.
Jhayzt said:
I still remember the days when we demanded for custom kernels.. and now, they just freaking pop up from anywhere! XD Will try this soon too!
Click to expand...
Click to collapse
+2
Power eficient workqueues and MP decision doesn't works..I enable this,but after few sec they disabled automated..btw great kernel,and great works
Sent from my MI 3W using XDA Free mobile app
Working great!!...charging is quite fast...
Mp decision works...it gets deactivated when u manually shut off cores....
Smooth kernel
I've been using this since last night and.. Speechless. XD No drop frames when scrolling here and there. UI animations are solid 60fps its as if I own a Nexus device(As in no dropped frames). The kernel works well with XenonHD. You dev @Shivam Kuchhal, deserve the 5 star rating.
Want to feel the same experience? Leave everything as is and change your Governor to ElementalX and I/O to SIO.
Jhayzt said:
I've been using this since last night and.. Speechless. XD No drop frames when scrolling here and there. UI animations are solid 60fps its as if I own a Nexus device(As in no dropped frames). The kernel works well with XenonHD. You dev @Shivam Kuchhal, deserve the 5 star rating.
Want to feel the same experience? Leave everything as is and change your Governor to ElementalX and I/O to SIO.
Click to expand...
Click to collapse
How's the battery?
Sent from my MI 3W using XDA Free mobile app
Gonna try this once I backed home and will report back
how to flash this kernel from stuxnet??
Successful flash in cwm but reboot in system, it still shows as stuxnet kernel
damnthomas said:
how to flash this kernel from stuxnet??
Successful flash in cwm but reboot in system, it still shows as stuxnet kernel
Click to expand...
Click to collapse
did you wipe cache, dalvik cache after flashing?
sandeep_ratiya said:
did you wipe cache, dalvik cache after flashing?
Click to expand...
Click to collapse
Nope...
I wipe before I flash
damnthomas said:
Nope...
I wipe before I flash
Click to expand...
Click to collapse
wipe after flashing
sandeep_ratiya said:
wipe after flashing
Click to expand...
Click to collapse
still cant
Overall very nice kernel.
But ElementalX is battery consuming.
What about others?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is my modded FlymeOS 4.5.4
This Rom is Based on Temasek CM12.1 builded by The Marionette
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
This rom should support all variants(6045Y,6045I,6045K,6045O),and supports dual SIM functions!]
Changelog
ChangeLog 1.2 VERSION:
-Gapps now working *Login Working*
-New Kernel for 6045Y
-Changed Build.prop
-Extend Battery Life
-removed Reboot in Updater-Script
-Now Support DUAL SIM
-Now you can delete Chinesse Apps without Bootloop
CHANGELOG 1.3 VERSION
-editted-build.prop
-editted updater-script
-ARDE OC KERNEL WHO FIXES BATTERY DRAIN
-MM-PP-DAEMON FIXED DOESN'T DRAINS THE BATTERY
-Now you can delete system apps with app remover root *download from play store*
-USE KERNEL AUDITOR TO EXTEND BATTERY LIFE AND PERFONMANCE
-I WILL WRITE INSTRUCTIONS TO EXTEND BATTERY LIFE AND PERFONMANCE
CHANGELOG 1.4 VERSION
-New kernel(fast,battery drain fixed..)
-some improvments for speed
-mm-pp-daemon doesn't eat battery
Changelog 1.5 version by:Murigny64
- remove some bloatwares (clean master, mi-greenify)
- remove chinese weather
- add Xperia keyboard ( must be actived in settings )
-framework popup fixed
-ARDE KERNEL
INSTRUCTIONS
1.Wipe All
2.Flash Flyme *you get first Failed*
3.Reboot to recovery
4.Flash Flyme *without Wipe*
5.Mount System
6.Reboot
7.Wait to system fully boot(approximately 5-15 min)
8.Go to recovery
9.Flash Gapps Pico
10.Mount System
11.Reboot
Extra Features with Dimo Tools-Flash when Ringing(change speed.times flash,working time and other)
-Greenify (Extend Battery Life)
-Viper4AudioFx
-3D Audio
-Wifi info
-Reversible like Stock
-Battery Info
-and more
Bugs:
-XPOSED FRAMEWORK-BOOTLOOP
-POPUP BOX COLOR-FIXED
DOWNLOADS
New version by Muringy64
https://mega.nz/#!KY8ChTIB!5RMwKQYHY4rCdJWwTkxixnLo9p_IVDCmek2JegF2I8g
Older versions:
https://www.androidfilehost.com/?w=files&flid=52233
If you have reboots or bootlop or something else flash this kernel:
https://www.androidfilehost.com/?fid=24459283995307681
CREDITS:
Big thanks to @muriginy64 for the New Build
Big thanks to @The Marionette for the New Kernel
XDA:DevDB Information
FlymeOS, ROM for the Alcatel Onetouch Idol 3
Contributors
The Marionette murginy64
Source Code:https://github.com/TeamRegular/android_kernel_alcatel_msm8916
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Version Information
Status: Beta
Version: 1.3
Created 2016-03-09
Last Updated 2016-03-28
Reserved
For gapps black screen, you can just turn off screen and wait for 2-3 mins and wake up again.
murigny64 said:
For gapps black screen, you can just turn off screen and wait for 2-3 mins and wake up again.
Click to expand...
Click to collapse
True
Sorry I can help lower the temperature of the idol in you is que.se flyme overheats and install the new kernel and yet warms much you would greatly appreciate your help
Mepk900 said:
Sorry I can help lower the temperature of the idol in you is que.se flyme overheats and install the new kernel and yet warms much you would greatly appreciate your help
Click to expand...
Click to collapse
This problem it's on All Custom Roms,i will try to solve it
I installed this rom yesterday on my 6045k. No heat problem, no reboots. I did not instal different boot.img, i use the one in the rom and everything works great so far. Great rom, different, stable, snappy
:good:
Only couple of things i don't like:
Double touch actions don't work, white navbar and dimo tools are in chinese
Can you mod the roms for 6039?
builderkage said:
Can you mod the roms for 6039?
Click to expand...
Click to collapse
AT the moment NO
New build later will be uploaded
Changelog 1.3 VERSION
-editted-build.prop
-editted updater-script
-ARDE OC KERNEL WHO FIXES BATTERY DRAIN
-MM-PP-DAEMON FIXED DOESN'T DRAINS THE BATTERY
-Now you can delete system apps with app remover root *download from play store*
-USE KERNEL AUDITOR TO EXTEND BATTERY LIFE AND PERFONMANCE
-I WILL WRITE INSTRUCTIONS TO EXTEND BATTERY LIFE AND PERFONMANCE
Hi thx for your work
An update to fix the problem of black popup ?
aleksandar.d123 said:
New build later will be uploaded
Changelog 1.3 VERSION
-editted-build.prop
-editted updater-script
-ARDE OC KERNEL WHO FIXES BATTERY DRAIN
-MM-PP-DAEMON FIXED DOESN'T DRAINS THE BATTERY
-Now you can delete system apps with app remover root *download from play store*
-USE KERNEL AUDITOR TO EXTEND BATTERY LIFE AND PERFONMANCE
-I WILL WRITE INSTRUCTIONS TO EXTEND BATTERY LIFE AND PERFONMANCE
Click to expand...
Click to collapse
How did you fix the daemon? Is that something you can apply to other roms? I would love nothing more than a zippy CM12 with good battery and no heat issue lol.
carnivalrejectq said:
How did you fix the daemon? Is that something you can apply to other roms? I would love nothing more than a zippy CM12 with good battery and no heat issue lol.
Click to expand...
Click to collapse
Just flashed Arde OC on this build and doesn't mm-pp-daemon eats battery
raptax said:
Hi thx for your work
An update to fix the problem of black popup ?
Click to expand...
Click to collapse
This build doesn't fix problem with black popup
but fixes battery drain (mm-pp-daemon) and dramaticly faster perfonmance i will later upload instructions
Here.s LINK for new Buildhttps://www.androidfilehost.com/?fid=24459283995298096
*Battery and Perfomance are Dramaticly Changed *Faster and Better Battery Life*
Settings for Better Perfomance and Battery
BIG CPU
Turn on
core1 and core 4
cpu maximum 1651 hz
cpu minimum 533 hz
cpu governor interactive
above hispeed delay 20000
align windows 0
boost 0
bootpulse-duration 80000
go hispeed load 99
hispeed freq 1651200
io is busy 0
max freq hysteresis 0
min sample time 20000
target loads
98533333:25
800000:32
960000:21
1113600:95
1344000:8
147600:7
1612800:6
1651200:9
timer_rate 2000
slack 80000
migration 0
sched load 0
LITTLE
active all cores
cpu maximum 1601
minimum 52
governor interactive
governor tunables
above hispeed
20000
533333:60000
800000:200000
align windows 0
boost 0
bootpulse duration 80000
hi speed load 99
hisped freq 800000
io busy 0
freq hysteris 0
sample time 30000
target loads
98 533333:19
800000:80
998000:12
1113600:81
1309000:9
1448000:69
1601000:95
time rate 20000
slack 80000
migration 0
sched load 0
There's instructions how extend battery life and perfonmance
if you get bootloop flash original kernel wait until boot and then Arde OC
and if you get problem with Updater-Script or something else or you want to stay on first build
flash first build of rom and then Arde OC and apply this instructions
Here's Screenshoot for Battery charged to 92 %
I hope I am not the only one with this problem.
Every time I flashed Flyme,the kernel already inside it would never let the rom get past the boot animation.
I would have to flash a custom kernel every time for it to boot.
The same problem occurs on the new release too.
I tried flashing original stock 5.0 to maybe fix the problem which only I have,but it didnt help at all...
The Marionette said:
I hope I am not the only one with this problem.
Every time I flashed Flyme,the kernel already inside it would never let the rom get past the boot animation.
I would have to flash a custom kernel every time for it to boot.
The same problem occurs on the new release too.
I tried flashing original stock 5.0 to maybe fix the problem which only I have,but it didnt help at all...
Click to expand...
Click to collapse
i don't know what's the problem
i had the same problem with the old build
in newer working for me ,no problem
if someone had in next post they are instructions
IF YOU HAVE BOOTLOOP OR SOMETHIND ELSE ON NEWER BUILD
HERE'S INSTRUCTIONS WHAT CAN YOU DO
1.FLASH THIS KERNEL
https://www.androidfilehost.com/?fid=24438995911974775
2.WAIT TO BOOT
3. REBOOT TO RECOVERY AND THEN FLASH THIS KERNEL
https://www.androidfilehost.com/?fid=24459283995298182
here's what i get in antutu
i'm used the RIL from FlymeOS ON CM13 but not works
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
INTRODUCTION
Psychedelic Kernel is a kernel based on DragonXia sources. Initially developed by @WhyOrean, was forked from @pappschlumpf, who has done a great job. The main goal it's to keep this kernel up to date. We all know the MIUI's stock kernel it's not good: the battery drains a bit faster and the phone gets easily hot. This kernel has a better CPU management, with a lot of features, a lot of governors and optimizations. I would say a big thanks to @WhyOrean: he permitted to me to share this kernel; and another big thanks to @pappschlumpf: he helped me a lot!
FEATURES
- Available for MI 5, MI 5s, MI 5s Plus, MI Mix and MI Note 2
- O3, CFLAGS AND GRAPHITE Optimizations
- Built with UBERTC 5.3
+ Governors: Impulse, Despair, Zzmove, Cultivation, Chill, Cafactive, Darkness, Relaxed, Blu_active, ElementalX, Interactive, Conservative, Ondemand, Powersave, Lionheart, Bioshock and Performance.
+ I/O Schedulers: Noop, Deadline, Cfq, Fiops, Bfq, Zen, Sio, Sioplus, Tripndroid and Maple.
- Hotplug and Lazyplug
- Touch Boost
- Thermal Tweaks
- CPU overclock[QRCODE][/QRCODE] up to 2.42 Ghz
- GPU overclock up to 681 Mhz
- Adreno Idler
- Kcal Controls
- Backlight Dimmer
- Higher backlight value
- Enable/Disable CRC
- Fsync and Dynamnic Fsync
- Gentle Fair Sleepers
- Arch Power saving
+ Suspend Mode: Autosleep, User Space, LCD Panel and Hybrid.
+ TCP Congestion Algorithms: Westwood, Reno, Bic, Highspeed, Hybla, HTCP, Vegas, Scalable, Lp, Yeah and Illinois.
+ Wakelocks: sensor_ind, msm_hsic_host, wlan_rx, wlan_ctrl, wlan, ipa, qcom rx.
- A lot of other optimizations: refer to source codes.
REQUIREMENTS
MI 5, MI 5s, MI 5s Plus, MI Mix or MI Note 2
MIUI 9 Nougat / LOS 14.1 / AOSP 7.1
DOWNLOAD
Psychedelic Kernel v0.7 [MIUI/LOS]
INSTALLATION
For maximum compatibility, this kernel keeps your existing ramdisk!
First time install:
Reboot to TWRP recovery
Flash the kernel zip
Flash Magisk (optional)
Wipe cache and dalvik (optional)
Reboot
Update the kernel:
Reboot to TWRP recovery
Flash the kernel zip
Wipe cache and dalvik (optional)
Reboot
Coming from another kernel:
Dirty flash your ROM or flash the boot.img only
Flash the kernel zip
Flash Magisk (optional)
Wipe cache and dalvik (optional)
Reboot
CREDITS
@WhyOrean
@pappschlumpf
@Psy_Man
For the other contributors refer to GitHub:
SOURCE CODE
nice. thx bro.
work on miui 8 stable (android 6)????
mendocino_610 said:
work on miui 8 stable (android 6)????
Click to expand...
Click to collapse
MIUI 9 Nougat
Hello, im tempted to try it. I'm on a Mi Note 2 running Miui 9 Xiaomi.EU version (7.9.21) should work right?
Naxxÿ said:
Hello, im tempted to try it. I'm on a Mi Note 2 running Miui 9 Xiaomi.EU version (7.9.21) should work right?
Click to expand...
Click to collapse
Should work on any MIUI nougat rom. I use MultiRom 7.9.21
Psy_Man said:
Should work on any MIUI nougat rom. I use MultiRom 7.9.21
Click to expand...
Click to collapse
I'll give it a go then and see how it goes
Grazie
Very nice! I've been waiting for a long time for a miui kernel! Nice job, man!
Support face unlock?
Flashed on current MiUI 9 Xiaomi.EU version on a Mi Note 2...everything is working fine. System seems snappy and i think battery life got even better. I tried running a few benchmarks Geekbench crashes at the end and can't manage to get Antutu over 105000. Before this Kernel score was floating between 120000/135000. Is there some energy saver setting that might be the culprit?
how is the highest and lowest screen brightness?? any screen sharpness etc..?
Lost WiFi after flashing this kernel
muntaha_v3 said:
Lost WiFi after flashing this kernel
Click to expand...
Click to collapse
For me the wifi works great with this kernel ... I'm on 7.9.21 globe rom
Stuck on boot after flashing
Tried this a few times on 7.9.22 (Global beta), couldn't get past the boot screen (i.e. before Android logo). Had to do TWRP restore each time as ROM over-write would not restore.
Not sure if I am doing something wrong, did follow the instructions. Using Magisk 14.0 and Viper loaded by .zip files in TWRP. :crying:
I am using this on the latest mi-globe rom 7.9.21 with Dolby and root . Installed right away , no problems at all , just some lag when you first enter the OS after a restart , that's all. Woks perfect with Cultivation governor and zen IO/Scheduler . Battery life is great , getting around 2 days of medium usage and a little bit of gaming. I wake up at ~8 am fully charged and i'm going to sleep ~ 11 pm with 50-55% left. Performance is great , games are running fine. No overheating issues , the phone is getting a little bit warm when you are gaming , that's all , not getting too hot. I don't know if it's my mobile network around here who is having the problem , but when i open the phone , from deepsleep , sometimes the network is getting around 1 bar of signal , then it switches to a better network reception. It gets sometimes annoying because i get called and the call drops after some time because the network reception changes or it stays on the line till i get again signal...
Great kernel and i hope to get more features in the feature. Thank you @Psy_Man for this great masterpiece :d .
pepsimaxmjs said:
Tried this a few times on 7.9.22 (Global beta), couldn't get past the boot screen (i.e. before Android logo). Had to do TWRP restore each time as ROM over-write would not restore.
Not sure if I am doing something wrong, did follow the instructions. Using Magisk 14.0 and Viper loaded by .zip files in TWRP. :crying:
Click to expand...
Click to collapse
Use magisk 13.3 instead of 14
alexmanu1 said:
I am using this on the latest mi-globe rom 7.9.21 with Dolby and root . Installed right away , no problems at all , just some lag when you first enter the OS after a restart , that's all. Woks perfect with Cultivation governor and zen IO/Scheduler . Battery life is great , getting around 2 days of medium usage and a little bit of gaming. I wake up at ~8 am fully charged and i'm going to sleep ~ 11 pm with 50-55% left. Performance is great , games are running fine. No overheating issues , the phone is getting a little bit warm when you are gaming , that's all , not getting too hot. I don't know if it's my mobile network around here who is having the problem , but when i open the phone , from deepsleep , sometimes the network is getting around 1 bar of signal , then it switches to a better network reception. It gets sometimes annoying because i get called and the call drops after some time because the network reception changes or it stays on the line till i get again signal...
Great kernel and i hope to get more features in the feature. Thank you @Psy_Man for this great masterpiece :d .
Click to expand...
Click to collapse
I have no signal issue and no issues at all
Yeah, it's more likely because of my mobile network in the area. You are right , the kernel doesn't have issues , it's stable
Hi. a cant understand how it work? because in .zip no boot.img
zaurikk said:
Hi. a cant understand how it work? because in .zip no boot.img
Click to expand...
Click to collapse
As i know , the kernel installs by AnyKernel2 method.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
ABOUT:
This is my personal kernel project, which I looked to be a stable kernel for daily usage, with useful features only, and to have a half term under performance and battery life for Xiaomi msm8996 devices. Inspired by projects like Flash Kernel and ElementalX Kernel
"While I am not a super star kernel developer, I do know my way around it." (Chancellor, Nathan - 2017)
PROJECT GOALS:
Keep kernel up-to-date with lastest stable Linux Kernel version (3.18.133)
Offer the user the best balance between battery life and performance
Just useful features. Features may be included only as needed (Read FAQ section to know the features that I won't add in anyway)
FEATURES:
Here are the major features of the kernel (More details on the Github repo)
Up-to-date with the latest stable Linux Kernel version (3.18.123)
Mainline Linux patches for CFQ
Several subsystems converted to use power efficient workqueues
Hides bootloader unlock from SafetyNet (can still fail through other means)
Available to flash with AnyKernel2 (thanks to @osm0sis)
Users facing features:
KCAL color control
USB Fastcharge
Adreno Idler
Boeffla Wakelock Blocker
INSTALLATION:
Boot to recovery
Flash kernel zip
Reboot
Yay! You've installed the kernel :victory:
DOWNLOADS: https://sourceforge.net/projects/kernelx-project/files/
Telegram Channel: https://t.me/KernelXChannel
Liked my work? Make a donation : http://bit.ly/hlcpereira_paypal
F.A.Q:
Q: Are you Planning to support MIUI?
1. A: No.
Q: Could you include feature x,y and z in your kernel please?
2. A: If you link me the commits or tell me what kernel you had the feature in, I can take a look at them. I won't promise that I will merge every request but I will always take it into consideration. I will NOT add:
Overclock or underclock of the CPU and GPU (Except for the cases that the device has a underclock on both or in just one, then it'll be considered)
Undervolt
Any other governors except the "kernel stock" ones
Any feature that just one or two people is going to use
Q: I'm having an issue, can you help me?
3. A: I'm not an amazing kernel developer but I will certainly try my best. First, start by reading the release posts, as I may make note of a particular issue. Also search the thread to see if I have discussed it before. If you see nothing, please provide me with a dmesg/last_kmsg and logcat, your ROM/kernel version, and a detailed description of the issue. If I can't reproduce reliably, I'm not going to fix the issue. (Extracted from Nathan Chancellor's Flash Kernel Thread)
Q: The kernel is f*cking up my battery! Plz...
4. A: Stop right there. The Kernel doesn't drain any battery, use an app like BetterBatteryStats to figure out what app is screwing with your phone. If verified the clocks are always online and on the max clock, then it'll checked out what's happen. Anyway logs are necessary.
THANKS TO:
@nathanchance
@flar2
@franciscofranco
@LuK1337 and Mi5Devs
@xNombre
Any other developer that I might forgot
ADDITIONAL NOTES:
ABOUT KERNEL USAGE IN OTHER ROMS THAT ARE NOT MINE:
You are free to use the kernel if you want. The only thing that I'll request to do it's to keep the kernel name. If you have modified something, just add a "-Mod" in the final of the kernel name or anything that states that the kernel has been modified, not by me, but by ROM maintainer.
XDA:DevDB Information
KernelX, Kernel for the Xiaomi Mi Note 2
Contributors
Hlcpereira
Source Code: https://github.com/Hlcpereira/kernel_xiaomi_msm8996
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2018-09-17
Created 2018-09-18
Last Updated 2019-02-03
Reserved #1
Reserved #2
Awesome bro
Kernel Update!
Just a little update with upstreamed kernel version (3.18.122)
Link on OP.
Hlcpereira said:
Kernel Update!
Just a little update with upstreamed kernel version (3.18.122)
Link on OP.
Click to expand...
Click to collapse
3.18 is in EOL state, could you make other higher version? It'd be great
rah_asia said:
3.18 is in EOL state, could you make other higher version? It'd be great
Click to expand...
Click to collapse
Weeell... 3.18.123 are in review under kernel.org Code review. Might be out in some days or so.
Hlcpereira said:
Weeell... 3.18.123 are in review under kernel.org Code review. Might be out in some days or so.
Click to expand...
Click to collapse
is kernel 4.x possible?
rah_asia said:
is kernel 4.x possible?
Click to expand...
Click to collapse
If we were Xiaomi or any other OEM, like Sony, yes XD
The JDCTeam, iirc, already tried that but no luck after all
Kernel Update!
- Upstreamed to 3.18.123
- Merged LA.UM.6.6.r1-09800-89xx.0 tag
- Included Adreno Idler
- Enabled Westwood TCP
Also released EAS version.
Download link: https://sourceforge.net/projects/kernelx-project/files/scorpio
What ROMs does it support? Can it replace MIUI kernel?
hypixus said:
What ROMs does it support? Can it replace MIUI kernel?
Click to expand...
Click to collapse
AOSP ROMs (LOS, AEX, PE, Cardinal etc.). I'm not planning to support MIUI, at least not as for now.
How does it interact with CPU clocks? I wrote something in my first post on those forums half an hour ago (https://forum.xda-developers.com/mi-note-2/help/issues-cpu-battery-life-horrible-xiaomi-t3849717), could it improve my current issues?
I don't mean overclocking at all.
hypixus said:
How does it interact with CPU clocks? I wrote something in my first post on those forums half an hour ago (https://forum.xda-developers.com/mi-note-2/help/issues-cpu-battery-life-horrible-xiaomi-t3849717), could it improve my current issues?
I don't mean overclocking at all.
Click to expand...
Click to collapse
I've underclocked the EAS kernel build to 2.2/2.15GHz on big clusters to handle a bit with battery and not heat up a lot the device. I actually don't have the scorpio, but also I didn't have any problems like you've wrote on your post on Natrium (Mi 5s Plus) not on Capricorn (Mi 5s) as my testers have related to me. Also that point of bad thermal management was found out by @Alberto96 and his AEX builds are fine with thermal related stuff. You can try them to check if you got it fine. Also you can try FloppyKernel for MIUI by @Jonas Cardoso (https://github.com/JonasCardoso/and...-Lite-Prime-Pro-01102018-Linaro-Oreo-MIUI.zip) to check if also solves your problems with the scorpio's MIUI 10 stock.
Can i use this kernel also on LOS 16?
insomnixXx said:
Can i use this kernel also on LOS 16?
Click to expand...
Click to collapse
Since the kernel it's based on LOS Kernel yes.
Hlcpereira said:
Kernel Update!
- Upstreamed to 3.18.123
- Merged LA.UM.6.6.r1-09800-89xx.0 tag
- Included Adreno Idler
- Enabled Westwood TCP
Also released EAS version.
Download link: https://sourceforge.net/projects/kernelx-project/files/scorpio
Click to expand...
Click to collapse
The EAS kernel very good for battery life but it impact performance so much, because 1 core of each Big n Little CPU get offline. Is it possible to just make it underclocked with big CPU limit between 1,8-2,1GHz and Little CPU between 1,516-1,59 (or @Any freq you think is the best)? Or it's the way the energy aware work? I think all core online with low freq is better then 2 core offline with big freq.
rah_asia said:
The EAS kernel very good for battery life but it impact performance so much, because 1 core of each Big n Little CPU get offline. Is it possible to just make it underclocked with big CPU limit between 1,8-2,1GHz and Little CPU between 1,516-1,59 (or @Any freq you think is the best)? Or it's the way the energy aware work? I think all core online with low freq is better then 2 core offline with big freq.
Click to expand...
Click to collapse
Big clusters are already on 2.15Ghz. Little clusters i kept the "stock" freqs. Actually EAS is better for graphics performance, not battery performance, which has as consequence bigger battery consumption.. Anyway, I've received feedbacks of the same thing on Natrium (my device) and already looking to check if I get it fine with the performance then
Hlcpereira said:
Actually EAS is better for graphics performance, not battery performance
Click to expand...
Click to collapse
Well.. it's good for graphic and battery too on my side, I can play games a bit longer with your kernel
Hlcpereira said:
Anyway, I've received feedbacks of the same thing on Natrium (my device) and already looking to check if I get it fine with the performance then
Click to expand...
Click to collapse
Great.. thank you.. waiting for your next build. BTW Little CPU stock freq gave too much heat when playing game, could you downclock it a bit
If anyone got the cores always running on the max freqs on EAS Kernel, set governor to ondemand and then set again to schedutil. That's a workaround for now
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <disclaimer.h>
* Your warranty is now void. *
* No guaranteed this'll explode your device, be careful, follow the instructions ! *
*don't point at me if your alarm dies after flashing this kernel ! *
Introduction
Hello all!
So this is Prototype™ Kernel for Lenovo Z2 Plus on which i was working.Main Purpose of the kernel is to provide balance performance to the user in daily life while giving full freedom to users to control the kernel.So this a short contribution to zuk community from my side hope you all will like it!
Thanks.
*Please read FAQ and installation instructions carefully.
Features
msm 3.18
Kernel rebased over als.
Upto date with linux stable (3.18.128)
Compiled with DTC+GCC9
Governors: Impulse, Darkness, Interactive, Conservative, Ondemand, Powersave, Userspace, Alucard, Nightmare, Chill, Blueactive
Relaxed, and Performance.
I/O Schedulers: Noop, Deadline, Cfq, ROW, Fiops, Bfq, Zen, Sio, Maple and Tripndroid.
F2FS Support
Advance TCP Congestion Control
Dynamic FSync
Boeffla WakeLock Blocker
Sound Control
Power Efficient Work Queue for major drivers and enabled by default.
commits to make cpuboost efficient
Faster app installation time
Simple GPU algorithm
PowerSuspend Drivers
Interactive and tuned for balance performance
State Notifier
Ships with Aroma installer
msm_thermal_simple instead msm_thermal
VDSO implementation
Spectrum supprt
Adreno idler
Fingerprint boost
And Much more.
msm 4.4
Rebased on linux stable tree
Current Kernel version is 4.4.168
Latest CAF tag merged is LA.UM.7.2.r1-05500-sdm660.0
Toolchain used is DTC8+GCC9
Features
EAS
Clang Support
CFQ updates from upstream
Power Efficient WQ
Brought back msm_thermal_simple instead msm_thermal
Fingerprint Boost
Boosting is done through CPU-Boost+Dynamic Schedtune Boost
UC to 1.4 and 1.9
IO schedulers available:cfq,bfq,noop,fiops,sio,zen,deadline
Fsync on/off toogle
Advance TCP Algorithms
Spectrum support
USB Fast charge
Installation instructions
First time:
Reboot to recovery
Flash Prototype kernel.zip
Reboot
Update the kernel:
Reboot to recovery
Flash Prototypekernel.zip
Reboot
Coming from another kernel:
Reboot to recovery
Dirty flash your current ROM
Flash Prototypekernel.zip
Reboot
Download
Sourceforge Folder
FAQ
1. Why the kernel zip is so large?
-> Treble Pie and Treble Oreo version of the kernel are packed in single file.You have to choose your version during installation so choose carefully.
2. How frequently it will get updated?
->Well its not fixed ,most probably it will be updated after every 15 days.But if some major bug is there then there can be quick updates.
3.Do you have any telegram release channel where we will be updated about the news about this kernel?
-> Yes we have telegram channel-https://t.me/prototypereleases
4.Can we request features?
-> Yes you can request features and ill try my best to implement it but no promise
5.I dont have any knowledge about governors and schedulers?
-> Dont worry if you dont have any knowledge just select next in aroma installer
6.Which ROMS are supported ?
-> Treble ROMS of pie and oreo are supported.Further compatibility will expand.
6.My phone heating after booting the kernel ?
-> Yes as the phone boots CPU carries out various tasks which lead to increase load on cpu and thus heating.So it is recommended that after flashing the kernel keep the phone idle for 10 mins and then see the magic
Thanks To/Credits
Code:
@amog787 (My Master)
@dmitrikudas (Helped me to boot my first kernel)
@DD3Boh (Master Dev)
@faizauthor
@davidvinavil
@frap129
@SultanXDA
@yarost
@davidevinavil
@andip71
@Kenny3fcb (Cleared Some Major Doubts)
@Cosmedd
@Flar2
@amarulz
@franciscofranco
@sanketp60 (For thread banner)
@movzx (For aroma installer)
@Pavan_Paps,@Gmp KV,@omkarmodgi and @lonelystag(For testing builds)
And all the authors of commit in my sources
[If i Forgot you by mistake please remind me]
Telegram Channel
@prototypereleases
XDA:DevDB Information
Prototype™ Kernel, Kernel for the Lenovo ZUK Z2 (Plus)
Contributors
Danish1999
Source Code: [url]https://github.com/Danish1999/msm-4.4 [/URL]
Kernel Special Features: Just Special
Version Information
Status: Stable
Current Stable Version: v4
Stable Release Date: 2018-10-29
Created 2018-10-04
Last Updated 2018-12-20
Screenshots
Reserved
Thanks for the kernel! Looking forward to flash it. Will review post few day usage
Interesting. I will try it soon. Hope it suitable with my daily use.
I have flashed it. Let us see how it performs
Sent from my z2_plus using XDA Labs
Why so slow in pubg?
takes forever to start...
Please give faster updates, that's the only hearty request.
---------- Post added at 06:23 PM ---------- Previous post was at 06:21 PM ----------
Sir, can you please add Spectrum app support,it is easy switching between profiles...... ?
Will it work for pe pie??
Pavan420 said:
Will it work for pe pie??
Click to expand...
Click to collapse
Ofcourse
Okay, initial impression.
-Charging rate is fine.
-Pubg gameplay is smooth and this is amazing that it stayed at 40°C for me. I was shocked cuz this was only possible before in Cardinal Rom. Great work dev
-Battery consumption is 13-14% per full length classic match.
- Though the phone doesn't heats as such, but the idle temps are higher than stock Arrow and Moxie ie. >36°C
I haven't done a full charge, so can't really comment in battery.
But this is Greta for initial build. Thanks for this kernel.
Finally a pie kernel. Well managed thermals undoubtedly. Although it is too early to comment. I hope battery lasts. Please move the thread to development section. Also kernel lacks hotplugs, wakelocks, and thermal controls. Also please list the work of each governors as listed on aroma on the thread for easy governor handling. One major missing is option to overclock gpu and cpu both.
PUBG not working
Super fine performance but while on pubg it's taking too long just to load (About 3 mins) then it hangs up at loading screen. I'm on AEX 5.8 rooted.
Kindly Suggest something to resolve this issue. I tried reflashing kernel but it didn't workout.
Thanks again for this Super thing.
I'll add battery backup as soon as possible.
Edit- I have checked with cpu float GPU freq. are not going up.
If this is using aroma for install, can something like ElementalX where you pick the default cpu & gpu clock speeds before installing the kernel possible? Of course setting everything after booting into rom with a kernel manager is fine, but a option to run without a manager would be appreciated
Will try this later today on ArrowOS Pie, as for features Im looking forward to overclocking, thermal and voltage control to be implemented
edit: early benchmark result, with all battery-oriented choice from aroma (darkness governor, noop i/o sched, "No" at playing games). Adreno driver v328 rev3
about the same as a snapdragon 625 according to gb. Gpu performance doesn't seems to be hobbled much
pipyakas said:
If this is using aroma for install, can something like ElementalX where you pick the default cpu & gpu clock speeds before installing the kernel possible? Of course setting everything after booting into rom with a kernel manager is fine, but a option to run without a manager would be appreciated
Will try this later today on ArrowOS Pie, as for features Im looking forward to overclocking, thermal and voltage control to be implemented
edit: early benchmark result, with all battery-oriented choice from aroma (darkness governor, noop i/o sched, "No" at playing games). Adreno driver v328 rev3
about the same as a snapdragon 625 according to gb. Gpu performance doesn't seems to be hobbled much
Click to expand...
Click to collapse
Yep that frequency selection are possible in aroma installer but I not going oc cpu.I'll think about oc gpu
Danish1999 said:
Yep that frequency selection are possible in aroma installer but I not going oc cpu.I'll think about oc gpu
Click to expand...
Click to collapse
Well with how the little cluster's missing 1.56ghz frequency I guessed that asking for cpu oc would be hard although it's obviously the main performance bottleneck and the adreno 530 on a 1080p screen is already fast enough.
Pre-baked undervolting and voltage though would make it I hope? Can predefined uv level be implemented in aroma as well?
pipyakas said:
early benchmark result, with all battery-oriented choice from aroma (darkness governor, noop i/o sched, "No" at playing games). Adreno driver v328 rev3
about the same as a snapdragon 625 according to gb. Gpu performance doesn't seems to be hobbled much
Click to expand...
Click to collapse
Its a known issue. When you upgrade GPU drivers from 2xx on z2, geekbench fails to properly benchmark the device, GPU performance isn't considered. Antutu benchmark doesn't have this issue.
after dirty flashing my rom then flashing the kernel all is going good performance is great but when i play pubg if i try to raise or lower the volume i get flashes in the background of the volume panel . i think its something related to the gpu drivers .
im on aex 6.0 latest
guyz_ahead said:
Finally a pie kernel.
Click to expand...
Click to collapse
Moxie and Nameless are there too!
ahh988 said:
after dirty flashing my rom then flashing the kernel all is going good performance is great but when i play pubg if i try to raise or lower the volume i get flashes in the background of the volume panel . i think its something related to the gpu drivers .
im on aex 6.0 latest
Click to expand...
Click to collapse
Atleast your game is starting mine is just not loading mainscreen. I'm on AEX 5.8.