Speaker and microphone don´t work while using phone app - LineageOS Questions & Answers

Hi there,
I changed to Lineage 15.1 on my asus zenfone 3 (ze520kl) today. Everything seems to work well so far, except the phone apps (I tried some). So the call is going out but I can´t hear anything. Not even the dialing sound. The Person on the other end can´t hear me neither. Microphone in general is working, I´m able to record. I already wiped cache again and rebooted a few times. It didn´t help. Do you have any advice for me to try?
Thanks a lot

Chromschmetterling said:
Hi there, I changed to Lineage 15.1 on my asus zenfone 3 (ze520kl) today........
Click to expand...
Click to collapse
I don't have this device and, since there's no Official LineageOS released for your device yet, your best bet is to post this question within the following Unofficial LineageOS 15.1 thread that's specific to your device for support and guidance.
https://forum.xda-developers.com/showthread.php?t=3754020
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.

Related

Lineage is 14.1 - HTC One M8. UI/Screen bug

So I tried to update through lineage and I lost access to the OS for a night and after letting it sit it worked again. But after I used it for a day, the screen started to glitch out and out right lose the image. Any resolutions?
RainbowNRooted said:
So I tried to update through lineage and I lost access to the OS for a night and after letting it sit it worked again. But after I used it for a day, the screen started to glitch out and out right lose the image. Any resolutions?
Click to expand...
Click to collapse
Your best bet is to post this question within the following Official LineageOS thread for your device.
http://forum.xda-developers.com/showthread.php?t=3511673
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE

Touch not working after flashing

I tried lineageos 14.1 for my yuphoria device yu5010. Installation was smooth and successful. But when booted touch did not respond, all other physicals keys were working. Can someone help me with this issue. thanks
I think you have the same problem as me. Since is flash a rom my touchscreen doesnt work. Whatever i tried or flashed (including dc unlocker - dc phoenix etc.) nothing. Touch only works in Recovery mode, you two??
If i flash the board firmware then touch works but sincce thats a testing rom i cant use that for daily use. Someone help us please.
lakn143 said:
I tried lineageos 14.1 for my yuphoria device yu5010. Installation was smooth and successful. But when booted touch did not respond, all other physicals keys were working. Can someone help me with this issue. thanks
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within the following Official LineageOS thread for your device.
https://forum.xda-developers.com/showthread.php?t=3585370
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
I'm having the same issue. My phone is the Asus Zenfone Max Pro M1 (X00TDB).

Fingerprint not working on LOS14, Redmi Note 3 Pro (Kenzo)

Hi guys,
I recently had a bootloop problem with CM13 on redmi note 3 pro kenzo, after whcih I upgraded to LOS 14, the official rom on the website and flashed it along with gapps using twrp.
Now the fingerprint scanner, which worked fine on CM13, does not work on LOS14.
It doesn't even make the small gesture vibrations when I put my finger against it.
I restored the last version of CM13 and it still works on it.
What can I do to solve this problem?
Any help would be very much appreciated.
Thanks!
emiki said:
Hi guys, I recently had a bootloop problem with CM13 on redmi note 3 pro kenzo, after whcih I upgraded to LOS 14, the official rom on the website and flashed it along with gapps using twrp...
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within the following Official LineageOS 14.1 thread for your device.
https://forum.xda-developers.com/showthread.php?t=3542491
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Got it working
Ibuprophen said:
I don't have this device but, your best bet is to post this question within the following Official LineageOS 14.1 thread for your device.
https://forum.xda-developers.com/showthread.php?t=3542491
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Click to expand...
Click to collapse
Hi Buddy,
Thanks for your quick reply. I managed to get it working now
The problem was when I installed CM13, I also did a firmware update, which was the culprit.
Now when I installed LOS14 I had to re-flash the latest firmware, in the link you posted.
I downloaded the firmware and flashed it with TWRP.
I have another issue though, in CM13 the fingerprint sensor would cover all of my fingertip's angles and now it seems that I have to hold it somewhat more 'parallel' to the sensor or else it won't get it. I did try rotating the finger a bit while setting it up but CM13 seemed more rubust. Any ideas?
Thanks a bunch!
emiki said:
I have another issue though, in CM13 the fingerprint sensor would cover all of my fingertip's angles and now it seems that I have to hold it somewhat more 'parallel' to the sensor or else it won't get it. I did try rotating the finger a bit while setting it up but CM13 seemed more rubust. Any ideas? Thanks a bunch!
Click to expand...
Click to collapse
I'm sorry but, I have no idea without ever having this device...
Posting your question within the appropriate thread (I had previously provided you) would be your best bet for member/developer support and guidance.
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Ibuprophen said:
I'm sorry but, I have no idea without ever having this device...
Posting your question within the appropriate thread (I had previously provided you) would be your best bet for member/developer support and guidance.
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Click to expand...
Click to collapse
Thanks!
Never mind its working correctly now. I just re-did the fingerprint thing and it's working great.
can't get my fingerprint to work on LOS 17.1, it's like it's there, but it doesn't react to anything. When I go to the fingerprint settings, it ask me to touch it in order to setup the thing, but when I place my finger on it, it does nothing. Did anyone ever heard of this issue or any fix for it? Thanks in advance.

LG G3 D855 international, LineageOS 14.1 won't wake up after falling to sleep.

Hi, i don't known, are there right place on not....
I'm trying the Lineage os 14.1 and 15.1. They looks be unstable. Both have problem with wakeup, reboot, shutdown.
When phone go to sleep then it won't wakeup. Nothing works after falling to sleep, only black sreen. Looks like the phone gets freeze.
When i choose reboot, the operation not end, freeze.
When I choose shutdown, the operation not end, freeze.
olny battery removing helps.
The stock rom "D85530C.zip" works very good. Now phone works whit it.
//written with google translation
olavsu1 said:
Hi, i don't known, are there right place on not.... I'm trying the Lineage os 14.1 and 15.1....
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within the following Official LineageOS 14.1 thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3464062
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.

Fingerprint didnt work on Mi Mix 2

I Have the newest Los on My Mi Mix 2. Everything working fine. But I cant set a fingerprint. When the Option come that I have to put the Finger on the sensor nothing Happens. Is there a solution?
rocee79 said:
I Have the newest Los on My Mi Mix 2. Everything working fine. But I cant set a fingerprint.....
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within the following Official LineageOS 15.1 thread that's specific to your device for some member guidance and support.
https://forum.xda-developers.com/showthread.php?t=3784676
I just wanted point out the following post from the above thread that looks like a way to get the Fingerprint going again but, I can't state that this will work since I don't have this device.
https://forum.xda-developers.com/showthread.php?p=76833503
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.

Categories

Resources