Related
Hey guys, I am new to the forum and this is my first time posting, yesterday I made a stupid mistake of flashing my Xiaomi 6 MIUI to Lineage OS, I didn't do it correctly and it resulted a bootloop, I managed to flash back the stock rom via fastboot, it did boot up into MIUI, but I cannot connect to network as nothing is shown there and it just stucks in updating...
I also have TWRP but somehow Xiaomi recovery had taken over and I have no idea how to enter TWRP, (tried volume up + PWR, both volume + PWR, volume down + PWR which just gives me fastboot, Volume up plus + home...) is there anyway for me to get to TWRP and maybe I can try to flash Lineage?
Or how can I flash back to the stock rom via fastboot/TWRP, thank you for your help~!
Flash twrp from fastboot, make a fastboot format userdata and from twrp wipe all and then flash firmware, rom of your choice, gapps if you want and the others. Then reboot.
ccelik97 said:
Flash twrp from fastboot, make a fastboot format userdata and from twrp wipe all and then flash firmware, rom of your choice, gapps if you want and the others. Then reboot.
Click to expand...
Click to collapse
hey there, thank you so much for your reply!!!
Stupidly I made a terrible mistake of relocking from the miflash tool and nope it doesn't work... Now will TWRP flash if my phone is locked???
And could you please tell me the instructions as I am a complete noob, thank you once again!
CaptainBilly said:
hey there, thank you so much for your reply!!!
Stupidly I made a terrible mistake of relocking from the miflash tool and nope it doesn't work... Now will TWRP flash if my phone is locked???
And could you please tell me the instructions as I am a complete noob, thank you once again!
Click to expand...
Click to collapse
No you can't do anything with a locked bootloader. But since you have permission to unlock your bootloader with xiaomi's tool then unlock it again. (To be honest I've first unlocked at octover and haven't locked it again so I don't know if you'd have to wait for another 3 days. But after getting it unlocked it'd be okay, you'll be able to use fastboot so no worries)
ccelik97 said:
No you can't do anything with a locked bootloader. But since you have permission to unlock your bootloader with xiaomi's tool then unlock it again. (To be honest I've first unlocked at octover and haven't locked it again so I don't know if you'd have to wait for another 3 days. But after getting it unlocked it'd be okay, you'll be able to use fastboot so no worries)
Click to expand...
Click to collapse
Okay then! Thank you! I just unlocked it! But now I have no idea how to reflash TWRP, could u please help?
I have the minimal ADB and fastboot installed, but currently when I type fastboot flash recovery recovery.img, both powershell/cmd says cannot load recovery.img...
CaptainBilly said:
Okay then! Thank you! I just unlocked it! But now I have no idea how to reflash TWRP, could u please help?
I have the minimal ADB and fastboot installed, but currently when I type fastboot flash recovery recovery.img, both powershell/cmd says cannot load recovery.img...
Click to expand...
Click to collapse
Do you have a file called recovery.img at the same directory with the fastboot binary file? If no either rename it or write the recovery img 's actual name in terminal after fastboot flash recovery.
ccelik97 said:
Do you have a file called recovery.img at the same directory with the fastboot binary file? If no either rename it or write the recovery img 's actual name in terminal after fastboot flash recovery.
Click to expand...
Click to collapse
I am not sure what fastboot binary file is...sorry, but I think what you meant is having TWRP file at the same location as the Minimal ADB and Fastboot program? If so yes I do, I did save the TWRP as the same location AND I did renamed it recovery.img, should I use MIUI Recovery Tool to install TWRP for me?
Thanks once again! Really appreciated.
CaptainBilly said:
I am not sure what fastboot binary file is...sorry, but I think what you meant is having TWRP file at the same location as the Minimal ADB and Fastboot program? If so yes I do, I did save the TWRP as the same location AND I did renamed it recovery.img, should I use MIUI Recovery Tool to install TWRP for me?
Thanks once again! Really appreciated.
Click to expand...
Click to collapse
Check the file name correctly. Windows doesn't show every extension name so maybe the file you see as "recovery.img" is actually "recovery.img.img". Enable to show all extensions from explorer settings (search for it in Google because I forget it too even though I'm doing it on all windows pcs I use
And for what that so called "fastboot binary file" is just that "fastboot" file in adb and fastboot folder. It's a binary type file and that's why I'm referring to it as a binary file (it has executable codes in it). And the difference from a text file is while a text file has a structure like "file start"+"the actual text in it"+"file end", a binary file has executable codes in it so you execute it (like typing "fastboot flash recovery twrp.img ; it means you're running fastboot to execute it's flash function to recovery partition of your device, and the file you want to use as the input is twrp.img in this example. It's good to learn.)
ccelik97 said:
Check the file name correctly. Windows doesn't show every extension name so maybe the file you see as "recovery.img" is actually "recovery.img.img". Enable to show all extensions from explorer settings (search for it in Google because I forget it too even though I'm doing it on all windows pcs I use
And for what that so called "fastboot binary file" is just that "fastboot" file in adb and fastboot folder. It's a binary type file and that's why I'm referring to it as a binary file (it has executable codes in it). And the difference from a text file is while a text file has a structure like "file start"+"the actual text in it"+"file end", a binary file has executable codes in it so you execute it (like typing "fastboot flash recovery twrp.img ; it means you're running fastboot to execute it's flash function to recovery partition of your device, and the file you want to use as the input is twrp.img in this example. It's good to learn.)
Click to expand...
Click to collapse
Thank you SO MUCH!!! your the best!!! Now I installed TWRP!!!
what should we do next? wipe portion? what does that mean? thanks!
CaptainBilly said:
Thank you SO MUCH!!! your the best!!! Now I installed TWRP!!!
what should we do next? wipe portion? what does that mean? thanks!
Click to expand...
Click to collapse
Not portion, but partition. Partitions are simply the different parts on a storage. For example when you open a file explorer on your device you see your sdcard folder which is in data partition. System files are in system partition, kernel is in boot partition etc.
And yes simply in twrp under wipe select advanced wipe and select all of them, wipe. After that from the same screen select format data, type yes to confirm and reboot to recovery again.
Then while in twrp copy files you want to flash to your device (or use an usb flash drive with otg, which I prefer but for this don't forget to tick usb otg in mount section in twrp)
Personally I flash firnware, rom, gapps and reboot, configure my account settings and auto download apps etc. Then when finished go back to recovery and flash magisk (flash magisk after booting into the system at least for once or most likely you won't pass safetynet checks) for root and the other things (e.g. font).
ccelik97 said:
Not portion, but partition. Partitions are simply the different parts on a storage. For example when you open a file explorer on your device you see your sdcard folder which is in data partition. System files are in system partition, kernel is in boot partition etc.
And yes simply in twrp under wipe select advanced wipe and select all of them, wipe. After that from the same screen select format data, type yes to confirm and reboot to recovery again.
Then while in twrp copy files you want to flash to your device (or use an usb flash drive with otg, which I prefer but for this don't forget to tick usb otg in mount section in twrp)
Personally I flash firnware, rom, gapps and reboot, configure my account settings and auto download apps etc. Then when finished go back to recovery and flash magisk (flash magisk after booting into the system at least for once or most likely you won't pass safetynet checks) for root and the other things (e.g. font).
Click to expand...
Click to collapse
oopsies sorry, I am very new to this and thanks for your really helpful explanation, I will wipe all now that includes dalvik,cache, system and data and internal storage, but what firmware should I flash and how do I know which one do I need? I am going for Linegae os btw.
Thanks once again, if without ur help my phone will essentially be dead :good:
ccelik97 said:
Not portion, but partition. Partitions are simply the different parts on a storage. For example when you open a file explorer on your device you see your sdcard folder which is in data partition. System files are in system partition, kernel is in boot partition etc.
And yes simply in twrp under wipe select advanced wipe and select all of them, wipe. After that from the same screen select format data, type yes to confirm and reboot to recovery again.
Then while in twrp copy files you want to flash to your device (or use an usb flash drive with otg, which I prefer but for this don't forget to tick usb otg in mount section in twrp)
Personally I flash firnware, rom, gapps and reboot, configure my account settings and auto download apps etc. Then when finished go back to recovery and flash magisk (flash magisk after booting into the system at least for once or most likely you won't pass safetynet checks) for root and the other things (e.g. font).
Click to expand...
Click to collapse
I will wipe all now! Thankyou! but one question how do I know which firmware I need to flash and what do you mean by going back and flash magisk?
I am planning to flash lineage os if possible! Thanks once again for your help! if its without you I would probably never have it functional again
CaptainBilly said:
I will wipe all now! Thankyou! but one question how do I know which firmware I need to flash and what do you mean by going back and flash magisk?
I am planning to flash lineage os if possible! Thanks once again for your help! if its without you I would probably never have it functional again
Click to expand...
Click to collapse
You're welcome but I'm pretty sure you'd figure it out yourself if you've wanted.
Which lineageos? And I suggest you to wait for the official los (next week I think) and try omnirom official for example. Officials are better for newcomers but try to not to spam the threads with the questions without doing some research first. You know I could just ignore your topic in the beginning and maybe nobody would answer it and you'd be on your own with all those comments on other threads without a proper preliminary knowledge.
ccelik97 said:
You're welcome but I'm pretty sure you'd figure it out yourself if you've wanted.
Which lineageos? And I suggest you to wait for the official los (next week I think) and try omnirom official for example. Officials are better for newcomers but try to not to spam the threads with the questions without doing some research first. You know I could just ignore your topic in the beginning and maybe nobody would answer it and you'd be on your own with all those comments on other threads without a proper preliminary knowledge.
Click to expand...
Click to collapse
Thank you!
I had successfully flashed Lineage OS 15.1, will be tweaking a bit and decide if I wanna go for another custom rom or flash back to MIUI
CaptainBilly said:
oopsies sorry, I am very new to this and thanks for your really helpful explanation, I will wipe all now that includes dalvik,cache, system and data and internal storage, but what firmware should I flash and how do I know which one do I need? I am going for Linegae os btw.
Thanks once again, if without ur help my phone will essentially be dead :good:
Click to expand...
Click to collapse
you can flash lineageos or MIUI by TWRP,just simply flow the wipe,then flash miui or lineageos ,but if you flash miui,you might go back to mi official recovery instead of TWRP(poor English).
laijirong said:
you can flash lineageos or MIUI by TWRP,just simply flow the wipe,then flash miui or lineageos ,but if you flash miui,you might go back to mi official recovery instead of TWRP(poor English).
Click to expand...
Click to collapse
How do you even get the phone to be recognised to initiate the flash if its stuck in constant boot loop??
Normally your laptop or pc needs to recognise the phone before it can start the flash right?
Shanrom said:
How do you even get the phone to be recognised to initiate the flash if its stuck in constant boot loop??
Normally your laptop or pc needs to recognise the phone before it can start the flash right?
Click to expand...
Click to collapse
vol + and power ,if not you might have it repaired.
Poor English.
I upgraded my phone to android EMUI8 and tried to install the RR 8.1 ROM but my device wouldn't boot up. Then I tried to reflash the stock system.img but it won't let me. I don't have TWRP on my phone but I can acces fastboot. Does anyone know what to do? Thanks in advance :^l
jetzecazemier said:
I upgraded my phone to android EMUI8 and tried to install the RR 8.1 ROM but my device wouldn't boot up. Then I tried to reflash the stock system.img but it won't let me. I don't have TWRP on my phone but I can acces fastboot. Does anyone know what to do? Thanks in advance :^l
Click to expand...
Click to collapse
What is it you mean , it won't let you. Does it give a message. Failed?
Are you at frp locked?
mrmazak said:
What is it you mean , it won't let you. Does it give a message. Failed?
Are you at frp locked?
Click to expand...
Click to collapse
Well when I try to flash the stock 8.0 system.img it gives me a "Invalid sparse file format at header magi" and when I try to flash TWRP it gives me a "FAILED (remote: partition length get error) I am frp unlocked by the way.
jetzecazemier said:
Well when I try to flash the stock 8.0 system.img it gives me a "Invalid sparse file format at header magi" and when I try to flash TWRP it gives me a "FAILED (remote: partition length get error)
Click to expand...
Click to collapse
Ok, that does not seem too bad, yet.
I suppose you are using system.img downloaded from web.
That image has given many that same error.
Best to use your system.img.
And the error flashing twrp, is common when using the nougat command or nougat recovery on Oreo.
Solutions.
Find your firmware on pro-teammt
http://pro-teammt.ru/firmware-database/?firmware_model=Bnd-&firmware_page=0
Then download update.zip
Extract files.
Get hauwei update extractor.
https://www.google.com/url?sa=t&sou...FjAAegQIARAB&usg=AOvVaw0xkKEyI85nY9x4Fjr1AWJl
Extract the system.img
Then fastboot flash it.
Recovery:
Oreo command== fastboot flash recovery_ramdisk twrp_ramdisk
Twrp name depends on version used. I use build 4 from here
https://forum.xda-developers.com/p10-lite/development/recovery-twrp-3-2-1-0-t3783447
mrmazak said:
Ok, that does not seem too bad, yet.
I suppose you are using system.img downloaded from web.
That image has given many that same error.
Best to use your system.img.
And the error flashing twrp, is common when using the nougat command or nougat recovery on Oreo.
Solutions.
Find your firmware on pro-teammt
http://pro-teammt.ru/firmware-database/?firmware_model=Bnd-&firmware_page=0
Then download update.zip
Extract files.
Get hauwei update extractor.
https://www.google.com/url?sa=t&sou...FjAAegQIARAB&usg=AOvVaw0xkKEyI85nY9x4Fjr1AWJl
Extract the system.img
Then fastboot flash it.
Recovery:
Oreo command== fastboot flash recovery_ramdisk twrp_ramdisk
Twrp name depends on version used. I use build 4 from here
https://forum.xda-developers.com/p10-lite/development/recovery-twrp-3-2-1-0-t3783447
Click to expand...
Click to collapse
Okay so I've downloaded the latest firmware for my model but when I try to extract the update.app inside of the update.zip file the huawei zip extractor gives me "RECOVERY_RAMDIS.img: Invalid header crc - Expected: 15200 Got: 44917
jetzecazemier said:
Okay so I've downloaded the latest firmware for my model but when I try to extract the update.app inside of the update.zip file the huawei zip extractor gives me "RECOVERY_RAMDIS.img: Invalid header crc - Expected: 15200 Got: 44917
Click to expand...
Click to collapse
yes there is a bug either in the extractor or the update files. they all do it. Go to the settings tab and take check mark off verify header.
mrmazak said:
yes there is a bug either in the extractor or the update files. they all do it. Go to the settings tab and take check mark off verify header.
Click to expand...
Click to collapse
I flashed the system.img but now the phone bootloops. It could be possible I got the wrong system.img because I don't know exactly what firmware my phone was on before I messed up. I only know it was EMUI8. Is there a way to completely reflash everything?
jetzecazemier said:
I flashed the system.img but now the phone bootloops. It could be possible I got the wrong system.img because I don't know exactly what firmware my phone was on before I messed up. I only know it was EMUI8. Is there a way to completely reflash everything?
Click to expand...
Click to collapse
Yes. I have guide thread here for that.
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
But also wipe in factory reset from stock recovery may solve the bootloop.
mrmazak said:
Yes. I have guide thread here for that.
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
But also wipe in factory reset from stock recovery may solve the bootloop.
Click to expand...
Click to collapse
Alright, I'll try that before I have a look at that thread
mrmazak said:
Yes. I have guide thread here for that.
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
But also wipe in factory reset from stock recovery may solve the bootloop.
Click to expand...
Click to collapse
I tried rebooting to stock recovery in order to factory reset but it only shows me the update, power off and reboot options so no factory reset possibility. I read through the entire thread you linked here but I'm very confused as to what to do with the full OTA file. I'm on a broken EMUI8 that bootloops and I'd like to clean flash EMUI8 again so I can flash an AOSP Oreo rom after that. What do I do?
jetzecazemier said:
I tried rebooting to stock recovery in order to factory reset but it only shows me the update, power off and reboot options so no factory reset possibility. I read through the entire thread you linked here but I'm very confused as to what to do with the full OTA file. I'm on a broken EMUI8 that bootloops and I'd like to clean flash EMUI8 again so I can flash an AOSP Oreo rom after that. What do I do?
Click to expand...
Click to collapse
Just made updates to guide last night. I think it is worded simple now.
Download my update "package" from step E
Extract it to a folder on your PC.
You are on emui8, so copy the HWOTA folder from the extracted zip to your sdcard
Also put hwota-update-7-8-auto.zip on sdcard.
Put the three (3) update files from pro-teammt.ru in the HWOTA8 folder on your sdcard
Put card into phone
Boot into twrp
Select install
Choose sdcard as source
Install hwota-update-7-8-auto.zip
mrmazak said:
Just made updates to guide last night. I think it is worded simple now.
Download my update "package" from step E
Extract it to a folder on your PC.
You are on emui8, so copy the HWOTA folder from the extracted zip to your sdcard
Also put hwota-update-7-8-auto.zip on sdcard.
Put the three (3) update files from pro-teammt.ru in the HWOTA8 folder on your sdcard
Put card into phone
Boot into twrp
Select install
Choose sdcard as source
Install hwota-update-7-8-auto.zip
Click to expand...
Click to collapse
So far so good but the FULLOTA update file I got from that website only has one file (update.zip) Do I need to extract that? And if so, what 3 files do I put on my sdcard?
jetzecazemier said:
So far so good but the FULLOTA update file I got from that website only has one file (update.zip) Do I need to extract that? And if so, what 3 files do I put on my sdcard?
Click to expand...
Click to collapse
No do not extract it.
On that site, next to link for update file, is "file list"
Click this. It gives links for all three files.
Put those three zip files into hwota folder
mrmazak said:
No do not extract it.
On that site, next to link for update file, is "file list"
Click this. It gives links for all three files.
Put those three zip files into hwota folder
Click to expand...
Click to collapse
Alright, I got it! Now I need to flash TWRP but the executable to install TWRP says my adb drivers are outdated. I have the minimal fastboot and adb installation from XDA.
jetzecazemier said:
Alright, I got it! Now I need to flash TWRP but the executable to install TWRP says my adb drivers are outdated. I have the minimal fastboot and adb installation from XDA.
Click to expand...
Click to collapse
That should be fine.
Usually means you have other adb also , probably from other tool.
If you have twrp , not need to use the terp recovery installer
mrmazak said:
That should be fine.
Usually means you have other adb also , probably from other tool.
If you have twrp , not need to use the terp recovery installer
Click to expand...
Click to collapse
Well the problem is I don't have TWRP and none of the versions i've tried to install work. The installer doesn't work either, it says closing adb daemon and stays on that.
jetzecazemier said:
Well the problem is I don't have TWRP and none of the versions i've tried to install work. The installer doesn't work either, it says closing adb daemon and stays on that.
Click to expand...
Click to collapse
Each step of the tool I put pause.
So it stopped on command and not closed.
Press spacebar
mrmazak said:
Each step of the tool I put pause.
So it stopped on command and not closed.
Press spacebar
Click to expand...
Click to collapse
Dude, you're the man! I got my device up and running again. I'll probably stay on EMUI8 since it's more stable than the current AOSP rom. I wanna root it tho so can I just use the lazy recovery tool to install twrp and simply install magisk?
jetzecazemier said:
Dude, you're the man! I got my device up and running again. I'll probably stay on EMUI8 since it's more stable than the current AOSP rom. I wanna root it tho so can I just use the lazy recovery tool to install twrp and simply install magisk?
Click to expand...
Click to collapse
Yes.
The lazy tool has recovery with encryption working
I got it working on EMUI8 but I decided to flash the aosp rom cuz i prefer stock android. Can't seem to get twrp to install tho. I keep getting "1 was unexpected at this time"
Original thread.
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software. *This is not entirely true for Realme devices since bootloader unlock or custom rom flash via TWRP or fastboot does not void your warranty but rooting does.
* So I heard. But that's question of detail.
* Same statement for XDA.
[DETAILED DESCRIPTION]:
I've spent my whole afternoon testing. And found out there are way more well made gsi roms out there and theoretically all of them should work. First, you gotta read this one. Then pick a gsi rom. I recommend one that has everything (must be AB image) since we don't have a working twrp yet thus can't flash opengapps but if the image file contains it then it's good to go. Go there. Pick one. Make sure it has ab-gapps-su in it's name meaning it's A/B partition dependent treble rom. Gapps means it has gapps ofc. Su means it has built in superuser (that you can ignore later for you'll be replacing it with Magisk naturally). After picking a gsi rom image successfully you can download it to your external sd card and flash it via twrp (yes, that half ass twrp for rmq provided on xda) or you can flash it via fastboot flash system system.img. Wiping data, cache, dalvik, system is necessary before doing so. Also formatting data in twrp after flashing the system image helps a lot just as OP said. If you want to try out other gsi roms you must flash stock vendor image file and do the flashing circle again. If you don't flash stock rom or stock vendor img before doing so your new gsi rom won't be able to work with screen lock. At least that's what I got on 4 different gsi roms. And one more thing. These gsi systems doesn't seem to support exfat file system. Meaning they'll want to format your external sd card. This can by bypassed if you flash lineage os boot.img. And then Magisk and at last modified vbmeta.img for RMQ. That file will make realme vendor think nothing is changed and won't try to fck you over with recovery destroyed issue.
[Prerequisites]:
unlocked bootloader
twrp recovery
External SD card
[BUGS]:
Face unlock and fingerprint isn't present on gsi roms which means they cannot work
Screen lock issue in cases when you don't flash stock vendor.img before migrating from one custom rom, be it gsi or zip to system gsi.img
[STEP BY STEP TUTORIAL IN CASE YOU'RE COMING FROM OTHER ROM]:
!! Most of these steps are precaution !!
Read these points carefully to have a basic knowledge what you're about to do
Pick a gsi image of your choice (official Android 9 Pie, especially AOSP is highly advised)
Put your image file onto your external SD card for your internal one will likely be erased
You should grab the appropriate vendor.img and boot.img files for your device by decompressing the 7z files
Get the modified vbmeta.img file for spoofing system to boot
Get Magisk
Get SuperSu remover(Beware! It also removes Magisk if installed)
Get Lineage OS boot.img
It's better to be safe than sorry so you better download whole rom package too
Put all these files onto your external SD card
Make sure you have your twrp recovery on your external SD card too
If you done everything well you should have these on your external SD: twrp, desired system gsi.img as AB variant, your vendor.img, modified vbmeta.img, stock boot.img, Lineage OS boot.img, color os flashable.ozip/zip, Magisk, SuperSu remover
Wipe system, data, dalvik, cache
Flash stock vendor.img as vendor
Flash system gsi.img as system
Flash lineage os boot.img as boot
Flash twrp.img as recovery
Flash modified vbmeta.img as vbmeta
Reboot to system (if the device reboots into recovery you'll have to format data sadly)
After reboot successful and you've done the initial google setup steps reboot to recovery and flash superuser unroot
Flash Magsik
Reboot, now you should have a working aosp like system as I do
[STEP BY STEP TUTORIAL IN CASE YOU'RE COMING FROM COLOR OS]:
!! You could have the same files as above just to make sure but system gsi.img,vbmeta.img,SuperSu remover,Magisk and Lineage OS boot.img should be enough if everything goes as planned and system boots for first try !!
Read the frequently asked questions, step one previously
Get your desired system gsi.img
Put your system gsi.img, twrp.img, Magisk, SuperSu remover, vbmeta.img, Lineage OS boot.img onto your external SD card
Wipe data, system, cache, dalvik
Flash system gsi.img as system
Flash lineage os boot.img
Flash twrp.img as recovery
Flash vbmeta.img ad vbmeta
Reboot (if reboots to recovery you have to format data) then do the Android setup
Reboot to recovery
Flash SuperSu remover.zip
Flash Magisk.zip
Reboot
Now your device should have successfully booted up
In case the gsi rom would be stuck on boot logo then you may reboot back to recovery by holding down volume up + power button and flash permissiver_v5.zip. It helped me boot Pixel Experience gsi rom.
Update.:
As you already know development on realme devices suck beacuse of ****ty or incomplete sources, lack of developers interest and biggest reason is lack of community support.
Our man here @BabluS is a legendary developer of Asus Zenfone Max M1 Pro and is willing to compile stable ROMs for our device. But, he needs some donations to buy the device. He has already compiled Android 10 (PE) for our device which is 99% stable. To continue this tremendous work he needs to have the device in hand.
Reasons To Donate:
1. Official PixelExperience ROM
2. Official POSP ROM
3. Will maintain & provide public Device Trees/Sources (So anyone can compile ROMs)
4. More development for realme 5 Pro
Name : Baswanth Madhav Saladi
Donate Using UPI: [email protected]
Donate using Paypal : [email protected]
Send screenshots of payment to @orgasmtron
We have to reach 6-7k in total out of which we have collected 2.6k..
Keep donating & get closer to stable custom ROM experience. Kudos!
All the donations will be public.Anyone can view and verify them.All details will be transparent.
NOTE:
We will update money collection daily evening. All details will be transparent.
List of Donators will get updated here
CLICK HERE TO CHECK!
Has anybody got Android 10 working properly?
tonibm19 said:
Has anybody got Android 10 working properly?
Click to expand...
Click to collapse
Yes. Method is same.
greenys' said:
Yes. Method is same.
Click to expand...
Click to collapse
Yeah but I mean, everything is working fine?
Fingerprint? Camera?
tonibm19 said:
Yeah but I mean, everything is working fine?
Fingerprint? Camera?
Click to expand...
Click to collapse
Dunno. As I said I never tried Android Q. But I presume fingerprint is missing and I'm quite sure no 48mp camera is present either.
What GSI File for Realme 5 Pro
what type GSI Image for Realme 5 pro, A or AB type?
Tegarcs142 said:
what type GSI Image for Realme 5 pro, A or AB type?
Click to expand...
Click to collapse
AB. On Android 9 and above you must use AB variant. It doesn't matter whether or not does your device use seamless updates. If you try to flash A only variant your device won't boot.
I installed GSI resurrection remix on my Realme 5 Pro and when I trying install Gapps get error not enough system partition. So I use resize file system in twrp and it worked.
Tegarcs142 said:
I installed GSI resurrection remix on my Realme 5 Pro and when I trying install Gapps get error not enough system partition. So I use resize file system in twrp and it worked.
Click to expand...
Click to collapse
Nice. Which twrp did you use?
greenys' said:
Nice. Which twrp did you use?
Click to expand...
Click to collapse
3.3.1-0
Tegarcs142 said:
... So I use resize file system in twrp and it worked.
Click to expand...
Click to collapse
Hi, can you please tell me what option you clicked for resizing the system partition?
the steps you did.
I tried doing that but don't find the option in TWRP.
For better experience with using gsi make sure to check Screenshot resolution if it's lower than our Device
Change Resolution :
1) download termux app
https://play.google.com/store/apps/d...?id=com.termux
2) run commands:
su
wm size 1080x2340
3) reboot*device
Enjoy better experience with gsi
greenys' said:
Original thread.
[DETAILED DESCRIPTION]:
I've spent my whole afternoon testing. And found out there are way more well made gsi roms out there and theoretically all of them should work. First, you gotta read this one. Then pick a gsi rom. I recommend one that has everything (must be AB image) since we don't have a working twrp yet thus can't flash opengapps but if the image file contains it then it's good to go. Go there. Pick one. Make sure it has ab-gapps-su in it's name meaning it's A/B partition dependent treble rom. Gapps means it has gapps ofc. Su means it has built in superuser (that you can ignore later for you'll be replacing it with Magisk naturally). After picking a gsi rom image successfully you can download it to your external sd card and flash it via twrp (yes, that half ass twrp for rmq provided on xda) or you can flash it via fastboot flash system system.img. Wiping data, cache, dalvik, system is necessary before doing so. Also formatting data in twrp after flashing the system image helps a lot just as OP said. If you want to try out other gsi roms you must flash stock vendor image file and do the flashing circle again. If you don't flash stock rom or stock vendor img before doing so your new gsi rom won't be able to work with screen lock. At least that's what I got on 4 different gsi roms. And one more thing. These gsi systems doesn't seem to support exfat file system. Meaning they'll want to format your external sd card. This can by bypassed if you flash lineage os boot.img. And then Magisk and at last modified vbmeta.img for RMQ. That file will make realme vendor think nothing is changed and won't try to fck you over with recovery destroyed issue.
[Prerequisites]:
unlocked bootloader
twrp recovery
External SD card
[BUGS]:
Face unlock and fingerprint isn't present on gsi roms which means they cannot work
Screen lock issue in cases when you don't flash stock vendor.img before migrating from one custom rom, be it gsi or zip to system gsi.img
[STEP BY STEP TUTORIAL IN CASE YOU'RE COMING FROM OTHER ROM]:
!! Most of these steps are precaution !!
Read these points carefully to have a basic knowledge what you're about to do
Pick a gsi image of your choice (official Android 9 Pie, especially AOSP is highly advised)
Put your image file onto your external SD card for your internal one will likely be erased
You should grab the appropriate vendor.img and boot.img files for your device by decompressing the 7z files
Get the modified vbmeta.img file for spoofing system to boot
Get Magisk
Get SuperSu remover(Beware! It also removes Magisk if installed)
Get Lineage OS boot.img
It's better to be safe than sorry so you better download whole rom package too
Put all these files onto your external SD card
Make sure you have your twrp recovery on your external SD card too
If you done everything well you should have these on your external SD: twrp, desired system gsi.img as AB variant, your vendor.img, modified vbmeta.img, stock boot.img, Lineage OS boot.img, color os flashable.ozip/zip, Magisk, SuperSu remover
Wipe system, data, dalvik, cache
Flash stock vendor.img as vendor
Flash system gsi.img as system
Flash lineage os boot.img as boot
Flash twrp.img as recovery
Flash modified vbmeta.img as vbmeta
Reboot to system (if the device reboots into recovery you'll have to format data sadly)
After reboot successful and you've done the initial google setup steps reboot to recovery and flash superuser unroot
Flash Magsik
Reboot, now you should have a working aosp like system as I do
[STEP BY STEP TUTORIAL IN CASE YOU'RE COMING FROM COLOR OS]:
!! You could have the same files as above just to make sure but system gsi.img,vbmeta.img,SuperSu remover,Magisk and Lineage OS boot.img should be enough if everything goes as planned and system boots for first try !!
Read the frequently asked questions, step one previously
Get your desired system gsi.img
Put your system gsi.img, twrp.img, Magisk, SuperSu remover, vbmeta.img, Lineage OS boot.img onto your external SD card
Wipe data, system, cache, dalvik
Flash system gsi.img as system
Flash lineage os boot.img
Flash twrp.img as recovery
Flash vbmeta.img ad vbmeta
Reboot (if reboots to recovery you have to format data) then do the Android setup
Reboot to recovery
Flash SuperSu remover.zip
Flash Magisk.zip
Reboot
Now your device should have successfully booted up
In case the gsi rom would be stuck on boot logo then you may reboot back to recovery by holding down volume up + power button and flash permissiver_v5.zip. It helped me boot Pixel Experience gsi rom.
Click to expand...
Click to collapse
Hi
I wanna install fortnite on RMQ
Through epic games I should register a realme account (but I can do that only with a Chinese phone number which I don't have )
Any solution pls
Tarikooo said:
Hi
I wanna install fortnite on RMQ
Through epic games I should register a realme account (but I can do that only with a Chinese phone number which I don't have )
Any solution pls
Click to expand...
Click to collapse
Wth no. Idk. It's not even a gsi related thing. I have no idea sorry.
hi guys i tried flashing havoc 3.0 gsi, and it works great. which one gapps should i use?
Does fingerprint and face unlock work?
This method worked on global rm5p.
I tried to flash the GSI Miui Erfan, but when entered in the initial settings, the screen cannot be touched.
Salmankapuas said:
I tried to flash the GSI Miui Erfan, but when entered in the initial settings, the screen cannot be touched.
Click to expand...
Click to collapse
Don't bother with miui. Only aosp or caf.
i flashed GSI rom, pixel, OxygenOS but the system cannot boot, only stuck on boot loading screen, is that normal?? how do i fix it?
I had this device for two days now, one of the first things that I tried was to install a custom ROM and I was surprised of how hard it was to do, so after a lot of trial and error I managed to install those two ROMs so I wanted to share how I did it so nobody has to suffer like I
Okay so I have tried two methods, one worked for Pixel Experience and the other for Lineage OS, there are probably better ways to do this so be sure to reply to this thread if you find another ways to accomplish this!
IMPORTANT!:
1. I did the two of this methods with the stock ROM with a minimal setup (skipping wifi, no google login, no fingerprint, etc).
2.You need to have the bootloader unlocked.
3. Im not responsable if you brick your phone or lose your data, do the following steps if you know what you're doing and always back-up your data!!!
Files used:
TWRP link (Download both the img and the zip)
Pixel Experience link
LineageOS link
Gapps link
Magisk 20.1 link
Encryption patch (patch_no_fde10) link
Method 1 (Tested succesfully with Pixel Experience):
Thanks to ElSuperFullHD for creating an awesome guide in how to install Pixel Experience!
How to install Pixel Experience in Xiaomi mi a3 (Spanish guide)
1. Start your phone in fastboot mode.
2. use fastboot getvar current-slot (Check if phone is in slot a, if it isnt change it to a using fastboot set_active a)
3. Flash custom recovery (in this case I used TWRP) with fastboot flash boot twrp.img
4. reboot using fastboot reboot (NOTE : Before hitting "Enter", long press Vol + on your device until you see the Android One logo. By doing this your device will be forced to boot into Recovery and not into System).
5. When TWRP starts, move and flash TWRP zip (This will make the recovery to stay) and reboot into recovery again (Long press Vol + when the device starts until you boot into recovery).
6. Go to advanced wipe Dalvic cache, Data and System.
7. Install Pixel Experience ROM and TWRP zip again and restart to system.
8. You're done, enjoy!
Method 2 (Tested succesfully with LineageOS):
Thanks to suschmania for your extremely helpful comment, I wouldnt have figured how to install LineageOS without him!
1. Start your phone in fastboot mode.
2. use fastboot getvar current-slot (Check if phone is in slot a, if it isnt change it to a using fastboot set_active a)
3. Flash custom recovery (in this case I used TWRP) with fastboot flash boot twrp.img
4. reboot using fastboot reboot (NOTE : Before hitting "Enter", long press Vol + on your device until you see the Android One logo. By doing this your device will be forced to boot into Recovery and not into System).
5. Once in TWRP copy TWRP recovery zip into the phone and wipe Dalvic cache, Data, Vendor and System.
6. Install the ROM and TWRP recovery zip (This will make the recovery to stay).
7. Reboot into recovery (twrp shows the warning no os installed, continue anyway).
8. The filesystem will be decrypted (All folders corrupted) dont worries, just go to advanced wipe and wipe internal data, once that's done copy Gapps, magisk and the encryption patch into the phone).
9. Flash Gapps, magisk (Optional) and encryption patch.
10. Reboot to system (It may take up to 10 minutes to start so give it time, if more than 10 minutes passes see step 11).
11. In case of bootlop boot back into recovery and format data (its the one where you need to write yes to format), after its done reboot to system again.
12. You're done, enjoy!
I hope this guide was helpful to you, good luck!
thanks so much for this! Been flashing since andriod 1.6 but couldnt wrap my dumb head around these dual partitions.
And is the same for miui.eu ?
raphae34 said:
And is the same for miui.eu ?
Click to expand...
Click to collapse
No. Follow the instructions in the OP there. They work.
Kaissner said:
I had this device for two days now, one of the first things that I tried was to install a custom ROM and I was surprised of how hard it was to do, so after a lot of trial and error I managed to install those two ROMs so I wanted to share how I did it so nobody has to suffer like I
Okay so I have tried two methods, one worked for Pixel Experience and the other for Lineage OS, there are probably better ways to do this so be sure to reply to this thread if you find another ways to accomplish this!
IMPORTANT!:
1. I did the two of this methods with the stock ROM with a minimal setup (skipping wifi, no google login, no fingerprint, etc).
2.You need to have the bootloader unlocked.
3. Im not responsable if you brick your phone or lose your data, do the following steps if you know what you're doing and always back-up your data!!!
Files used:
TWRP link (Download both the img and the zip)
Pixel Experience link
LineageOS link
Gapps link
Magisk 20.1 link
Encryption patch (patch_no_fde10) link
Method 1 (Tested succesfully with Pixel Experience):
Thanks to ElSuperFullHD for creating an awesome guide in how to install Pixel Experience!
How to install Pixel Experience in Xiaomi mi a3 (Spanish guide)
1. Start your phone in fastboot mode.
2. use fastboot getvar current-slot (Check if phone is in slot a, if it isnt change it to a using fastboot set_active a)
3. Flash custom recovery (in this case I used TWRP) with fastboot flash boot twrp.img
4. reboot using fastboot reboot (NOTE : Before hitting "Enter", long press Vol + on your device until you see the Android One logo. By doing this your device will be forced to boot into Recovery and not into System).
5. When TWRP starts, move and flash TWRP zip (This will make the recovery to stay) and reboot into recovery again (Long press Vol + when the device starts until you boot into recovery).
6. Go to advanced wipe Dalvic cache, Data and System.
7. Install Pixel Experience ROM and TWRP zip again and restart to system.
8. You're done, enjoy!
Method 2 (Tested succesfully with LineageOS):
Thanks to suschmania for your extremely helpful comment, I wouldnt have figured how to install LineageOS without him!
1. Start your phone in fastboot mode.
2. use fastboot getvar current-slot (Check if phone is in slot a, if it isnt change it to a using fastboot set_active a)
3. Flash custom recovery (in this case I used TWRP) with fastboot flash boot twrp.img
4. reboot using fastboot reboot (NOTE : Before hitting "Enter", long press Vol + on your device until you see the Android One logo. By doing this your device will be forced to boot into Recovery and not into System).
5. Once in TWRP copy TWRP recovery zip into the phone and wipe Dalvic cache, Data, Vendor and System.
6. Install the ROM and TWRP recovery zip (This will make the recovery to stay).
7. Reboot into recovery (twrp shows the warning no os installed, continue anyway).
8. The filesystem will be decrypted (All folders corrupted) dont worries, just go to advanced wipe and wipe internal data, once that's done copy Gapps, magisk and the encryption patch into the phone).
9. Flash Gapps, magisk (Optional) and encryption patch.
10. Reboot to system (It may take up to 10 minutes to start so give it time, if more than 10 minutes passes see step 11).
11. In case of bootlop boot back into recovery and format data (its the one where you need to write yes to format), after its done reboot to system again.
12. You're done, enjoy!
I hope this guide was helpful to you, good luck!
Click to expand...
Click to collapse
The 1st method for Pixel Experience does not work for me, after following all the steps carefully, if i boot into system it boots me to fastboot everytime, or if I dont reboot to system (in TWRP after flashing everything) it only says no OS installed are you sure you want to continue, so any help?
Snjeky said:
The 1st method for Pixel Experience does not work for me, after following all the steps carefully, if i boot into system it boots me to fastboot everytime, or if I dont reboot to system (in TWRP after flashing everything) it only says no OS installed are you sure you want to continue, so any help?
Click to expand...
Click to collapse
the "no os installed" is normal, dont worries.
The installation method for pixel experience worked when I installed the old version, it was updated multiple times so probably the process changed, I will update the thread later
This dual slot fuking my mind up.
TWRP asking for password to decrypt data. while first boot in recovery.
also *unable to decrypt FBE device* error while formating data.
"couldnt able to flash Any ROM "unable to partition path/cache" error.
ps. flashed in slot a.
When I install twrp on fastboot it stuck there, I have Android 10 stock, is anything that I can do ? I try like 3 times and always the same
ManuMan99 said:
When I install twrp on fastboot it stuck there, I have Android 10 stock, is anything that I can do ? I try like 3 times and always the same
Click to expand...
Click to collapse
downgrade to android 9. apparently android 10 got some issues.
pradie said:
downgrade to android 9. apparently android 10 got some issues.
Click to expand...
Click to collapse
Don't tell him to downgrade. If you downgrade you will lose the use of all sensors or proximity sensor, compass etc and to fix this you need to flash persist.img which will cause you to lose widevine L1 so say goodbye to hd streaming and the like.
Be careful what information you give people if it will cause massive issues.
Its not that straightforward to just downgrade
garylawwd said:
Don't tell him to downgrade. If you downgrade you will lose the use of all sensors or proximity sensor, compass etc and to fix this you need to flash persist.img which will cause you to lose widevine L1 so say goodbye to hd streaming and the like.
Be careful what information you give people if it will cause massive issues.
Its not that straightforward to just downgrade
Click to expand...
Click to collapse
I apologize for not being precise. i had the same issue. downloaded and flashed android 9 Stock global ROM with mi flash tool. now it's booted correctly.
---------- Post added at 12:37 PM ---------- Previous post was at 12:37 PM ----------
garylawwd said:
Don't tell him to downgrade. If you downgrade you will lose the use of all sensors or proximity sensor, compass etc and to fix this you need to flash persist.img which will cause you to lose widevine L1 so say goodbye to hd streaming and the like.
Be careful what information you give people if it will cause massive issues.
Its not that straightforward to just downgrade
Click to expand...
Click to collapse
I apologize for not being precise. i had the same issue. downloaded and flashed android 9 Stock global ROM with mi flash tool. now it booted correctly.
Sapper Morton said:
Indeed, it's not as straight forward, but it's possible without losing Widevine L1 security level; read my experience here, I explained the steps I took ; so far, I came back to v11.0.8.0 QFQMIXM from v10.3.17.0 PFQEUXM after the downgrade, with no issues whatsoever (no format/wipe data); my DRM Keys and sensors remains intact.
Click to expand...
Click to collapse
Thank you I wouldn't have guessed that would work it seems too easy to be a fix but that's good news.
Thanks for that info
garylawwd said:
Don't tell him to downgrade. If you downgrade you will lose the use of all sensors or proximity sensor, compass etc and to fix this you need to flash persist.img which will cause you to lose widevine L1 so say goodbye to hd streaming and the like.
Be careful what information you give people if it will cause massive issues.
Its not that straightforward to just downgrade
Click to expand...
Click to collapse
Then what to do? I downgraded from Android 10 Stock to Android 9 Stock 3.13.0.PFQMIXM because I soft-bricked my phone. I Flashed the stock ROM using Mi Flash tool. It flashed OK but my MI A3 sensors are not working. Someone said Flash persist.img via TWRP but when I try to flash it asked me in which partition to flash.
Partitions available are:
bluetooth
modem
System Image
Dtbo
Vendor Image
splash
Boot
Install Recovery Ramdisk
I am confused where to flash. If this method isnt suitable as you said then guide me what to do. I have Global Fastboot ROM for Android 9 Version 3.16.0.PFQMIXM for Mi A3 available. Should I flash this using Mi Flash tool? Does it solve sensor issues or not? Please help.
vjrx88 said:
Then what to do? I downgraded from Android 10 Stock to Android 9 Stock 3.13.0.PFQMIXM because I soft-bricked my phone. I Flashed the stock ROM using Mi Flash tool. It flashed OK but my MI A3 sensors are not working. Someone said Flash persist.img via TWRP but when I try to flash it asked me in which partition to flash.
Partitions available are:
bluetooth
modem
System Image
Dtbo
Vendor Image
splash
Boot
Install Recovery Ramdisk
I am confused where to flash. If this method isnt suitable as you said then guide me what to do. I have Global Fastboot ROM for Android 9 Version 3.16.0.PFQMIXM for Mi A3 available. Should I flash this using Mi Flash tool? Does it solve sensor issues or not? Please help.
Click to expand...
Click to collapse
If you are on stock android 9 now then flash an android 10 custom rom and then downgrade to android 9 like you did. Downgrading from stock 10 to stock 9 causes big issues like you are having.
If you did flash persist.IMG you would have caused stuff in your device to break forever without any way of fixing it don't do it!!
garylawwd said:
If you are on stock android 9 now then flash an android 10 custom rom and then downgrade to android 9 like you did. Downgrading from stock 10 to stock 9 causes big issues like you are having.
If you did flash persist.IMG you would have caused stuff in your device to break forever without any way of fixing it don't do it!!
Click to expand...
Click to collapse
I updated it to Stock Android 10 OTA update using TWRP Recovery and re-flashed TWRP and Magisk ZIP using TWRP and now sensors and phone is working fine. I know Android 10 for Mi A3 have some bugs but I decided to live with it until Stable Android 10 update made available by Xiaomi. Flashing Custom Android 10 ROMs have mixed reviews and have bugs so I decided to stay on Stock.
I tried flashing persist.img by mounting Persist partition using TWRP before doing this but nothing happens and sensors didn't worked. Now they are working.
garylawwd said:
Don't tell him to downgrade. If you downgrade you will lose the use of all sensors or proximity sensor, compass etc and to fix this you need to flash persist.img which will cause you to lose widevine L1 so say goodbye to hd streaming and the like.
Be careful what information you give people if it will cause massive issues.
Its not that straightforward to just downgrade
Click to expand...
Click to collapse
No problem in downgrade ,, i Already downgraded. No bugs facing!
---------- Post added at 06:34 AM ---------- Previous post was at 06:32 AM ----------
vjrx88 said:
I updated it to Stock Android 10 OTA update using TWRP Recovery and re-flashed TWRP and Magisk ZIP using TWRP and now sensors and phone is working fine. I know Android 10 for Mi A3 have some bugs but I decided to live with it until Stable Android 10 update made available by Xiaomi. Flashing Custom Android 10 ROMs have mixed reviews and have bugs so I decided to stay on Stock.
I tried flashing persist.img by mounting Persist partition using TWRP before doing this but nothing happens and sensors didn't worked. Now they are working.
Click to expand...
Click to collapse
Lol i came back to 9 ,, untill stable comes or i will use pixel rom ?
Kaissner said:
I had this device for two days now, one of the first things that I tried was to install a custom ROM and I was surprised of how hard it was to do, so after a lot of trial and error I managed to install those two ROMs so I wanted to share how I did it so nobody has to suffer like I
Okay so I have tried two methods, one worked for Pixel Experience and the other for Lineage OS, there are probably better ways to do this so be sure to reply to this thread if you find another ways to accomplish this!
IMPORTANT!:
1. I did the two of this methods with the stock ROM with a minimal setup (skipping wifi, no google login, no fingerprint, etc).
2.You need to have the bootloader unlocked.
3. Im not responsable if you brick your phone or lose your data, do the following steps if you know what you're doing and always back-up your data!!!
Files used:
TWRP link (Download both the img and the zip)
Pixel Experience link
LineageOS link
Gapps link
Magisk 20.1 link
Encryption patch (patch_no_fde10) link
Method 1 (Tested succesfully with Pixel Experience):
Thanks to ElSuperFullHD for creating an awesome guide in how to install Pixel Experience!
How to install Pixel Experience in Xiaomi mi a3 (Spanish guide)
1. Start your phone in fastboot mode.
2. use fastboot getvar current-slot (Check if phone is in slot a, if it isnt change it to a using fastboot set_active a)
3. Flash custom recovery (in this case I used TWRP) with fastboot flash boot twrp.img
4. reboot using fastboot reboot (NOTE : Before hitting "Enter", long press Vol + on your device until you see the Android One logo. By doing this your device will be forced to boot into Recovery and not into System).
5. When TWRP starts, move and flash TWRP zip (This will make the recovery to stay) and reboot into recovery again (Long press Vol + when the device starts until you boot into recovery).
6. Go to advanced wipe Dalvic cache, Data and System.
7. Install Pixel Experience ROM and TWRP zip again and restart to system.
8. You're done, enjoy!
Method 2 (Tested succesfully with LineageOS):
Thanks to suschmania for your extremely helpful comment, I wouldnt have figured how to install LineageOS without him!
1. Start your phone in fastboot mode.
2. use fastboot getvar current-slot (Check if phone is in slot a, if it isnt change it to a using fastboot set_active a)
3. Flash custom recovery (in this case I used TWRP) with fastboot flash boot twrp.img
4. reboot using fastboot reboot (NOTE : Before hitting "Enter", long press Vol + on your device until you see the Android One logo. By doing this your device will be forced to boot into Recovery and not into System).
5. Once in TWRP copy TWRP recovery zip into the phone and wipe Dalvic cache, Data, Vendor and System.
6. Install the ROM and TWRP recovery zip (This will make the recovery to stay).
7. Reboot into recovery (twrp shows the warning no os installed, continue anyway).
8. The filesystem will be decrypted (All folders corrupted) dont worries, just go to advanced wipe and wipe internal data, once that's done copy Gapps, magisk and the encryption patch into the phone).
9. Flash Gapps, magisk (Optional) and encryption patch.
10. Reboot to system (It may take up to 10 minutes to start so give it time, if more than 10 minutes passes see step 11).
11. In case of bootlop boot back into recovery and format data (its the one where you need to write yes to format), after its done reboot to system again.
12. You're done, enjoy!
I hope this guide was helpful to you, good luck!
Click to expand...
Click to collapse
EDIT: Solved it by flashing this inofficial TWRP: https://forum.xda-developers.com/mi-a3/development/recovery-twrp-3-4-0-0-patched-boot-img-t4123287
I have a problem. I am stuck on fastboot. I followed the tutorial unto step 4:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash boot twrp.img
target reported max download size of 803475456 bytes
sending 'boot_a' (39892 KB)...
OKAY [ 0.910s]
writing 'boot_a'...
OKAY [ 0.197s]
finished. total time: 1.111s
But after this the phone always reboots to fastboot, I can't boot into TWRP or the system. Plz help.
spring_roll said:
EDIT: Solved it by flashing this inofficial TWRP: https://forum.xda-developers.com/mi-a3/development/recovery-twrp-3-4-0-0-patched-boot-img-t4123287
I have a problem. I am stuck on fastboot. I followed the tutorial unto step 4:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash boot twrp.img
target reported max download size of 803475456 bytes
sending 'boot_a' (39892 KB)...
OKAY [ 0.910s]
writing 'boot_a'...
OKAY [ 0.197s]
finished. total time: 1.111s
But after this the phone always reboots to fastboot, I can't boot into TWRP or the system. Plz help.
Click to expand...
Click to collapse
I know you solved it but the reason the other twrp wasn't working for you is because it is built only for Android pie and I'm assuming you have Android 10. That's why you always booted to fastboot. The installer.zip will work with any Android version but the twrp.img files are built using kernels of a specific Android version
garylawwd said:
I know you solved it but the reason the other twrp wasn't working for you is because it is built only for Android pie and I'm assuming you have Android 10. That's why you always booted to fastboot. The installer.zip will work with any Android version but the twrp.img files are built using kernels of a specific Android version
Click to expand...
Click to collapse
Ok thx for the info.
Another question. I didn't understand step 5:
"5. When TWRP starts, move and flash TWRP zip (This will make the recovery to stay)"
Where do I have to move and flash the ZIP? I just skipped this step and now I have the ROM installed which I wanted (PE Plus).
Do I have to do something now or is TWRP installed properly now? Can I fetch this step later?
spring_roll said:
Ok thx for the info.
Another question. I didn't understand step 5:
"5. When TWRP starts, move and flash TWRP zip (This will make the recovery to stay)"
Where do I have to move and flash the ZIP? I just skipped this step and now I have the ROM installed which I wanted (PE Plus).
Do I have to do something now or is TWRP installed properly now? Can I fetch this step later?
Click to expand...
Click to collapse
For you I don't think twrp is installed now. Some ROMs have twrp built in but if not then you have to manually flash twrp every time you flash a ROM or it gets overwritten with stock recovery.
When you flash the twrp.img and boot twrp it isn't actually installed, you are running it in ram and when you reboot it goes out of ram and your left with an un-bootable slot due to your boot slot being messed up from flashing the twrp.img and twrp won't stay installed.
For it to be installed properly you need to flash twrp.zip which will patch your boot.img with twrp and install it.
But as I said everytime you flash a ROM this will overwrite twrp and it will be gone unless the twrp.zip is flashed in twrp before rebooting.
Not as easy as it used to be by just installing twrp once and it is there forever. The new era of Android
Hello, can someone help me with a detailed guide to flashing TWRP on my LG g820n. I'm kinda new to all this.
kofisefa30 said:
Hello, can someone help me with a detailed guide to flashing TWRP on my LG g820n. I'm kinda new to all this.
Click to expand...
Click to collapse
I can give you an overview of how to / why do it. But it would be much easier if you mentioned which android version you're running, and then find a copy of that boot loader with twrp already injected.
twrp is no longer in it's own recovery partition, so 'flashing' it is not the same. It has to be ram disk injected into the boot partition. To do that, you actually need the / a device with twrp already working, as it's an option in twrp to ramdisk inject the twrp image.
In some cases, if you have a version of fastboot that will boot certain versions (that are bootable) of twrp, then you can use it to do the 'ramdisk' inject twrp.
As said, mention the version of android you are running, the boot partitions with twrp are around for all of them.
Whew, I didn't think I could know any less .
Anyways, I'm running Android 11.
kofisefa30 said:
Whew, I didn't think I could know any less .
Anyways, I'm running Android 11.
Click to expand...
Click to collapse
So what you'll have to do, to use the attached zip file, is to be; 1) rooted, 2) use magisk manager to create the boot partition with magisk installed, 3) use qfil to flash the newly created boot partition with magisk (be sure to save off your original boot partition first), 4) flash the attached zip file with magisk manager which will inject twrp into boot partition.
You'll get a message after doing above saying you're now 'unrooted'. But to fix that just use twrp to flash magisk zip.
AsItLies said:
So what you'll have to do, to use the attached zip file, is to be; 1) rooted, 2) use magisk manager to create the boot partition with magisk installed, 3) use qfil to flash the newly created boot partition with magisk (be sure to save off your original boot partition first), 4) flash the attached zip file with magisk manager which will inject twrp into boot partition.
You'll get a message after doing above saying you're now 'unrooted'. But to fix that just use twrp to flash magisk zip.
Click to expand...
Click to collapse
If I'm already rooted and trying to get TWRP for flashing ArrowOS, is this what I should do?
Flash TWRP with magisk > flash ArrowOS with TWRP > Flash magisk with TWRP > Reboot?
And does any of this require modifying the abl_a.bin file again to get into fastboot mode or can it all be done on device?
BWA_Dallas said:
If I'm already rooted and trying to get TWRP for flashing ArrowOS, is this what I should do?
Flash TWRP with magisk > flash ArrowOS with TWRP > Flash magisk with TWRP > Reboot?
And does any of this require modifying the abl_a.bin file again to get into fastboot mode or can it all be done on device?
Click to expand...
Click to collapse
I'm not familiar with the process for installing after market roms, look in the guides section or even better, follow the info that's specific to arrowOS, there should be some doc available.
AsItLies said:
I'm not familiar with the process for installing after market roms, look in the guides section or even better, follow the info that's specific to arrowOS, there should be some doc available.
Click to expand...
Click to collapse
These are the instructions given
Boot TWRP
Make backups
Tap Install -> Select Rom zip
Go to reboot menu -> Select opposite inactive Slot
Reboot recovery
Now in Arrow Recovery
Factory reset
Apply Update -> Flash Magisk if any
Reboot system now
I'm just confused on the TWRP part as the first step is to boot TWRP and that's what I'm confused about. The only guide I see on here for installing TWRP is for the sprint version.
I also see some people talking about different GSI related things and some don't mention it all, I'm a bit confused with it all haha