Android Pie semi-GSI
NEW METHOD TO INSTALL ANDROID PIE GSI ON YOUR VINCE
Choose one method, see the one that makes you more comfortable:
Any fix needed see 2nd and 3rd post before ask!
rawrower said:
This includes:
newest firmware, the new vendor image, Dark Ages kernel (+Darkness Control), the original GSI system image, and all fixes.
How to (testing):
Format system, vendor, cache, data, then flash Full4
Link V4:
https://drive.google.com/file/d/1o5op_3E7dT99OQ5qWMcrKIpw5tqYESU1/view
List of things that are broken:
- No encryption
- SIM card settings are still reset every reboot (it works fine, it's just annoying)
- Message about the system being damaged still appears every reboot (it's not actually damaged)
- USB connection type can only be changed in developer options in the settings, not in the notification
- Data Transfer Tool can crash during Pixel Setup, but you can go to app list, show system apps, and disable it in order to continue with the setup process.
Click to expand...
Click to collapse
Instructions for Vince:
Requirements :
Unlocked device:
https://forum.xda-developers.com/redmi-note-5/how-to/how-to-how-to-unlock-redmi-5-plus-t3750250
8.1 vendor base rom:
https://forum.xda-developers.com/redmi-note-5/development/rom-cardinalaosp-t3774232
Vendor only (unzip and flash img in vendor partition):
https://drive.google.com/file/d/1KHtB2JZZseimOUwmmZ-preQwA6L-v6R7/view
Orange fox recovery:
https://androidfilehost.com/?fid=5862345805528044525
NEW BUILD PPR1 + POST ZIPS
Gsi PPR1 A-only extract before flash, don't use de a/b gsi
https://androidfilehost.com/?w=files&flid=280192
New builds will appear here:
t.me/PsemiGSI
¡USE ONLY TREBLE VERSION OF KERNEL!
Dark Ages kernel:
https://forum.xda-developers.com/redmi-note-5/development/kernel-dark-ages-primero-t3809803
LH kernel:
https://forum.xda-developers.com/re...ernel8-1-0-lh-kernel-official-builds-t3806512
Universe by @ManoloRey:
https://drive.google.com/file/d/1EbPrwy3aTaIkQh9hWDPlRXR48F7mnE1B/view
Zucc Karnul:
https://forum.xda-developers.com/redmi-note-5/development/zucc-karnul-partial-eas-t3828199
Genom kernel:
t.me/genom_kernel_ch
OLD INSTALL METHOD:
How to flash:
boot to recovery
clean wipe (system, data, cache, dalvik, vendor, boot)
flash:
base rom
updated firmware (optional)
boot to android
enable usb debug
boot to recovery
wipe cache, dalvik and data
flash:
sgsi image to system partition
vendor image to vendor partition (optional, may break VoLTE)
treble kernel (optional, but advised)
reboot to recovery
mount vendor
post sgsi zips
reboot to Recovery
mount vendor partition
flash:
magisk Beta (optional)
lagfix
camer2api
gcamfix
fingerprintpfix (only if you got goodix fingerprint)
voltefix (optional)
dt2w (optional)
boot to android
Install:
GSM
GCam
Wellbeing (optional)
Easteregg (optional)
Rounded recents (optional, magisk module)
reboot
Bugs:
none if you use the fixes in second post
ROM OS Version: 9.0 Pie sGSI
Version Information Status: Testing Stable
Original general thread:
https://forum.xda-developers.com/pr...ment/rom-android-p-developer-preview-t3816659
FIX'S (use only if needed):
PPR1 lagfix:
https://mega.nz/#!xVFj2I6I!1KjHKXK9lOSbdKXTfC0E0rLElYZPObQIaOsvPcVSG48
ADB fix:
https://github.com/AdrianDC/bootimage_adb_patcher/blob/master/release/bootimage_adb_unsecure.zip
Gcam:
https://drive.google.com/file/d/18LsjebFx7QdHr8tyiqDk32dK_e-lCDkw/view
Gcam Settings:
https://drive.google.com/file/d/1YNxEuldCgIQzxOqp8_4Mwd--rf2uSy_1/view
Gcam api2:
https://forum.xda-developers.com/attachment.php?attachmentid=4431945&d=1519687895
Gallery:
https://drive.google.com/file/d/1I642K2_rqpgttoTwLzXVIft4qC8oL2W0/view
Playstore/setup (gsm fix):
https://www.apkmirror.com/apk/googl...2-8-74-100400-204998136-android-apk-download/
Launcher mods:
https://drive.google.com/file/d/16QfQRcjVBzf6lHWlf06QvYoKYpKe2Y5q/view
VoLTE fix PPR1 (Volte works, flash on first boot):
https://mega.nz/#!AYsxQDCT!MdKWvyexdKqDiGCnHGxPOq1ZGjZADI-uTXN6Bn0pWoo
Wifi/Bluetooth fix by @abhishek987:
https://mega.nz/#!9QFmlQhL!bIvU3oRLFSt9GGR-KFZ1ftVmGnzfcwwOZBcPIbJhdKY
NEXT FIXES MAY BREAK YOUR ROM, USE AT YOUR OWN RISK!!!
Goodix fingerprint fix ( thank you @laststandrighthere)
https://mega.nz/#!td1B2CAZ!fGgnZHFIKaDzbba1jrsh2MaXuAmMU3FBd8IrcXQj1oY
Volte fix v3 (testing)
https://mega.nz/#!wZ9yGSbZ!Ah_-VaZOjdOgUvq1e0ZiFSFsrktUGLYMtAp6TpT-1Sg
Double touch to wake (Thank you @Pyrus01)
https://mega.nz/#!ZY8wVC7T!pWH7Nutr11n73MoB5AgYqOsw9GSfZoTSEZet8Q6-Ocg
Bootanimation fix:
https://mega.nz/#!0dc0zKLJ!4mpJ1AoXiUw-w4Fg9mcBqciWKI04USPOSh4qPyrPFtk
EXTRAS:
Root:
Magisk 16.7 BETA and up SHOULD be working:
https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
Magisk Pie (use only if beta don't work for you):
https://mega.nz/#!sANxDSSC!3cY4GnSAR4WovxOI3JkQ2N2pnqBpIXgvI23ZO_eq-U4
Substratum for P:
http://telegra.ph/Substratum-07-27
Firmware Oreo 8.1(advised,may fix some problems):
https://forum.xda-developers.com/re.../firmware-xiaomi-redmi-note-5-5-plus-t3759683
Android Pie Easter egg:
https://mega.nz/#!8VVWVYAR!3lacmD8aMM7NP7Okz8wbI5aeZwWG5iAda5T3k6myopY
Android Pie Wellbeing:
Apk:
https://mega.nz/#!5Vcm2SiK!qVfDTVzo_RI7hp0OUcVO3B0LeKBaQGP6vcVp9un9bxQ
Zip:
https://mega.nz/#!9EFSTCzQ!kQoODxg0OkUMeMBGUTIljGASryu0ltTVisqWl-8iRUU
Rounded recents (magisk module):
https://mega.nz/#!AR90WYxK!EOtqFDu3xCr2HWQrGWNdkzN5sQNbCap-fMJJi9Qu_fs
Screenshot please
ecrudragon said:
Screenshot please
Click to expand...
Click to collapse
here some screenshots
TioCareca said:
here some screenshots
Click to expand...
Click to collapse
Thanks for the SS, i don't think much is changed, isn't it? anyway is it stable enough to use or is experimental only as you said in OP?
ecrudragon said:
Thanks for the SS, i don't think much is changed, isn't it? anyway is it stable enough to use or is experimental only as you said in OP?
Click to expand...
Click to collapse
Almost the same as dp4, front camera in WhatsApp is fixed, fingerprint is working for me...
its experimental, but good enough for using, still can appear some not identified bugs, well it's better to try it for yourself...
TioCareca said:
Almost the same as dp4, front camera in WhatsApp is fixed, fingerprint is working for me...
its experimental, but good enough for using, still can appear some not identified bugs, well it's better to try it for yourself...
Click to expand...
Click to collapse
I will try it tomorrow as its my off and get back to you :good:
TioCareca said:
Root:
Magisk 16.7 BETA SHOULD be working
https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
Custom kernel:
Flash your desired custom kernel (treble support)
Flash POST-sGSI_3.zip
Reboot
Vendor only:
https://drive.google.com/file/d/1KHtB2JZZseimOUwmmZ-preQwA6L-v6R7/view
Click to expand...
Click to collapse
Should i flash this vendor or flash cardinal AOSP?
BhagyeshGamer said:
Should i flash this vendor or flash cardinal AOSP?
Click to expand...
Click to collapse
your call, i flashed cardinal and it worked...
Thank you for your contribution.
Double tap work?
TioCareca said:
your call, i flashed cardinal and it worked...
Click to expand...
Click to collapse
mine is booting into fastboot.
BhagyeshGamer said:
mine is booting into fastboot.
Click to expand...
Click to collapse
did you follow the instructions correctly?
I think I need Video Tutorial to Flash?
renslorens said:
I think I need Video Tutorial to Flash?
Click to expand...
Click to collapse
:laugh:
boot into recovery
wipe everything except microsd
flash cardinal rom
boot and enable usb debug
boot into recovery
wipe cache, dalvik and data
flash gsi into system
mount vendor
flash post zips 1,2 and 3
flash lagfix
reboot
TioCareca said:
:laugh:
boot into recovery
wipe everything except microsd
flash cardinal rom
boot and enable usb debug
boot into recovery
wipe cache, dalvik and data
flash gsi into system
mount vendor
flash post zips 1,2 and 3
flash lagfix
reboot
Click to expand...
Click to collapse
going to follow this now. what is with dotos 2.4 vendor only img? flashing that is taking me to fastboot
BhagyeshGamer said:
going to follow this now. what is with dotos 2.4 vendor only img? flashing that is taking me to fastboot
Click to expand...
Click to collapse
never tested that, maybe i will take it off...
TioCareca said:
:laugh:
boot into recovery
wipe everything except microsd
flash cardinal rom
boot and enable usb debug
boot into recovery
wipe cache, dalvik and data
flash gsi into system
mount vendor
flash post zips 1,2 and 3
flash lagfix
reboot
Click to expand...
Click to collapse
Successfully booted!
---------- Post added at 09:02 PM ---------- Previous post was at 08:54 PM ----------
VOLTE is not working but i am recieving SMS. Secondly i am not getting any call ui, i just see the number and nothing else. no audio nothing. i am talking about standard phone call.
BhagyeshGamer said:
Successfully booted!
Click to expand...
Click to collapse
great ???
BhagyeshGamer said:
VOLTE is not working but i am recieving SMS. Secondly i am not getting any call ui, i just see the number and nothing else. no audio nothing. i am talking about standard phone call.
Click to expand...
Click to collapse
Strange, call ui is working in mine...
Related
Moto e4 "woods" xt1762 build nma26.42-75 mt6737m *build and mt chip specific"
THIS IS FOR MOTO E4 MT6737M ONLY
This thread is specifically for our mediatek mt6737M moto e4 with build number MOTOROLA_E_NMA26.42-75_RO Please don´t ask about other devices .
Hot off the press
* Stock rom flashable in twrp*
https://mega.nz/#!poAwQSQT!xEYpF81TljAO0YTfOYPHInVt9zXbyjJ_34t4kMkPWkk
Don't forget to join us on telegram
https://t.me/joinchat/G3XDFEO7AR4fGdyBRfwVOw
http://telegra.ph/woods-development-01-07
I AM IN NO WAY RESPONSIBLE FOR ANY DAMAGE THIS GUIDE MAY CAUSE AND BE WARNED THIS WILL ERASE YOUR PERSONAL DATA POSSIBLY VOIDing YOUR WARRANTY
-----CREDITS------
LENOVO, XDA, NEEDROM, www.stupdroid.com , [email protected], KevMetal
I am going to upload TO and link FROM MEGA all stock files as well as the correct scatter file here followed by two simple boot loader unlock methods which to my knowledge is different from the other E4 variants .I will also add a working twrp recovery . This is only a guide and a place to post the files needed to return to stock or to unlock our boot loader and root with twrp. All credits go to the creators of the tools so please direct donations accordingly. This is not my work if not my experience and files shared after trying to get the correct files and guides needed for our specific build and variant.
*THIS GUIDE ASSUMES YOU KNOW HOW TO USE SP FLASHTOOLS, ADB , KNOW WHAT ROOT AND CUSTOM RECOVERY ARE . IF YOU DON´T PLEASE ASK GOOGLE OR XDA UNIVERSITY . THIS GUIDE PROVIDES ONLY THE FILES AND NECCESARY STEPS*
-MOST IMPORTANTLY-
The correct scatter file for our device and stock boot image will be attached here . These will be followed by the correct process and the stock rom and other tools needed.
UNLOCKING OUR BOOT LOADER
***WE DON´T NEED TO GO THROUGH THE OFFICIAL LENOVO UNLOCK CODE REQUEST PROCESS TO UNLOCK***
-go to settings
-go to about
-press build number various times until developers options are enabled
-enable oem unlock and usb debugging
-disable verify apps via usb
-run adb terminal from tools folder
adb reboot bootloader
fastboot oem unlock
press volume up to select yes
**stock files to save your device from brick**
---flash via spflashtool using scatter.txt---
another guide ............with full stock rom download link or look on needrom
http://www.stupdroid.com/2017/09/stock-rom-Moto-E4.html
https://mega.nz/#!Fphw0DLB!NMjft8Ire7hAvAXc90CDIBpma7spIvrGIUuIJf5cE5M
stock boot
https://mega.nz/#!cw4xzAxb!y2G3zoMw27n0TY1b2OGcMETtj0InA5P-4Puhp78-JPk
stock recovery
https://mega.nz/#!IpwxUZDT!GsDpUE_06J0iFCInG86EpvTFscrm-o1oei-9YnxtBx8
stock preloader image
https://mega.nz/#!c1BiGTqD!PfmEHE_TSY4KFHM67bNHVXaVqweJMkb61vsYg4Ljgeo
stock preloader bin
https://mega.nz/#!JgITiQLb!VprsJuuyxNpeSp7QQ2uHKsT9jTQ4zOxlNwX9rjI-sKw
stock preloader woods bin
--- FLash Recovery twrp and Root with Magisk---
**ALL CREDIT GOES TO XN LOGOS FROM STUPDROID FOR THE RECOVERY AND CUSTOM BOOT IMAGE AND TOPJOHNWU FOR MAGISK**
alternative method and original thread credits to xn logos here on stupdroid
-put dm-verity .zip on sd card
-put magisk 14 .zip on sd card
-put custom boot and custome recovery .image in adb tools folder
-launch adb
-attach device
-adb reboot bootloader
-fastboot flash boot boot.image
-fastboot flash revovery recovery.image
-fastboot reboot recovery
-swipe to allow modifications
-install no dm-verity zip
-reboot recovery
-flash magisk 14 .zip
-reboot system
https://mega.nz/#!t1gmlZpR!VxPVphtPp7fvC1N37aPPKv8gBlw8gJZ6ElHPO5Fz3zY
custom boot
https://mega.nz/#!t8wywTAJ!D2rkYV29VOPPbutEi298zwcfS3LIg0TaT6oBpNkNSgs
magisk 14
https://mega.nz/#!hkoQBJxK!EGe7_tVctHRbu96nhffP5JIlNvZEL08eFIvbtFkezug
disable dm-verity
https://mega.nz/#!00AC0bzL!I0qi5MEveYSNeCYBxStIC8TaDZc3BPSaryTwR7JC_zw
unofficial custom twrp recovery by XN Logos
original thread and makers guide all credits to xn logos here:
http://www.stupdroid.com/2017/09/root-twrp-moto-e4-xt1762.html
LINEAGE 14 LOS
"woods"
*credits to Darklord 4pda & lenovo.ru forums *
--original source --
http://lenovo-forums.ru/topic/24568-moto-e-xt1762-lineageos-141-android-nougat-712-custom-rom/
INSTALLATION INSTRUCTIONS:
-put rom and gapps and NEW recovery on sd
-boot recovery
-flash NEW recovery
https://yadi.sk/d/6-MBH6gB3Ni7aS
-reboot recovery
-wipe
-flash rom
https://yadi.sk/d/BfbMumUk3Ni7cp
-flash gapps
http://opengapps.org/
-flash magisk 14
https://mega.nz/#!t8wywTAJ!D2rkYV29VOPPbutEi298zwcfS3LIg0TaT6oBpNkNSgs
*BUGS
-no voice over LTE
-tell us
*WORKING
-everything like bluetooth , wifi , gsm , etc etc
SCREENSHOTS BELOW
some screenies of LOS
KevMetal said:
LINEAGE 14 LOS for "woods" custom rom from Darklord 4pda & lenovo.ru forums
http://lenovo-forums.ru/topic/24568-moto-e-xt1762-lineageos-141-android-nougat-712-custom-rom/
going to install and post some pics
Click to expand...
Click to collapse
how to install lineage os ?
any guide ?
bugs ? whats working ! whats not ?
Francesco Franz said:
how to install lineage os ?
any guide ?
bugs ? whats working ! whats not ?
Click to expand...
Click to collapse
i installed last night
i haven't noticed any bugs yet *
you can install in the classic manner
-put rom and gapps on sd
-boot recovery
-flash NEW recovery
https://yadi.sk/d/6-MBH6gB3Ni7aS
-reboot recovery
-wipe
-flash rom
https://yadi.sk/d/BfbMumUk3Ni7cp
-flash gapps
http://opengapps.org/
-flash magisk 14
*xposed fails but at least i don't have to worry about roaming R ...recovery shows incorrect battery levels but working correctly in the rom *all 3 bad ported recoveries for this phone shows 50% battery all the time * this recovery is better than the other one from stupdroid i posted . This is not my work . It is the work of darklord ..for sources and donations and further info plus download links go to the russian lenovo website .
some more screenshots
KevMetal said:
some more screenshots
Click to expand...
Click to collapse
@KevMetal
The size of LineageOS zip is 335 mb. is this a whole rom or what
stock rom size is about 3GB. why so much difference
Francesco Franz said:
@KevMetal
The size of LineageOS zip is 335 mb. is this a whole rom or what
stock rom size is about 3GB. why so much difference
Click to expand...
Click to collapse
yeah man don't worry ...it's the whole rom ...who knows what goes into stock ...one of the main advantage s of custom rom is dropping all the extra weight :good:
lg stock on my g3 was 1GB and aosp stock in the 350mb etc etc :victory:
you can always put all that 3GB back if you don't like running light :cyclops:
i have been screen on for ages with only a slight drop in battery ...
KevMetal said:
i have been screen on for ages with only a slight drop in battery ...
Click to expand...
Click to collapse
is dual sim working well ?
can i get more screenshots ?
sorry bro i have the dual sim but i am only using one so cant say ....i am going out for a sunday lunch so cant do screenies
KevMetal said:
sorry bro i have the dual sim but i am only using one so cant say ....i am going out for a sunday lunch so cant do screenies
Click to expand...
Click to collapse
no gapps. what the heck
Francesco Franz said:
no gapps. what the heck
Click to expand...
Click to collapse
i am rather certain it clearly states flash gapps
playstore running on my device after flashing gapps
KevMetal said:
playstore running on my device after flashing gapps
Click to expand...
Click to collapse
Where the link to download ?
No gapps link in -OP-
About this build.
Working fine and for daily use.
Dual sim, wifi, radio, bluetooth and bla bla working fine.
No voice over lte support.
@KevMetal you are great
Francesco Franz said:
Where the link to download ?
No gapps link in -OP-
About this build.
Working fine and for daily use.
Dual sim, wifi, radio, bluetooth and bla bla working fine.
No voice over lte support.
@KevMetal you are great
Click to expand...
Click to collapse
NOW IT'S ALL THERE
LINEAGE 14 LOS
"woods"
*credits to Darklord 4pda & lenovo.ru forums *
--original source --
http://lenovo-forums.ru/topic/24568-moto-e-xt1762-lineageos-141-android-nougat-712-custom-rom/
INSTALLATION INSTRUCTIONS:
-put rom and gapps and NEW recovery on sd
-boot recovery
-flash NEW recovery
https://yadi.sk/d/6-MBH6gB3Ni7aS
-reboot recovery
-wipe
-flash rom
https://yadi.sk/d/BfbMumUk3Ni7cp
-flash gapps
http://opengapps.org/
-flash magisk 14
https://mega.nz/#!t8wywTAJ!D2rkYV29VOPPbutEi298zwcfS3LIg0TaT6oBpNkNSgs
*BUGS
-no voice over LTE
-tell us
*WORKING
-everything like bluetooth , wifi , gsm , etc etc
SCREENSHOTS BELOW
KevMetal said:
NOW IT'S ALL THERE
LINEAGE 14 LOS
"woods"
*credits to Darklord 4pda & lenovo.ru forums *
--original source --
http://lenovo-forums.ru/topic/24568-moto-e-xt1762-lineageos-141-android-nougat-712-custom-rom/
INSTALLATION INSTRUCTIONS:
-put rom and gapps and NEW recovery on sd
-boot recovery
-flash NEW recovery
https://yadi.sk/d/6-MBH6gB3Ni7aS
-reboot recovery
-wipe
-flash rom
https://yadi.sk/d/BfbMumUk3Ni7cp
-flash gapps
http://opengapps.org/
-flash magisk 14
https://mega.nz/#!t8wywTAJ!D2rkYV29VOPPbutEi298zwcfS3LIg0TaT6oBpNkNSgs
*BUGS
-no voice over LTE
-tell us
*WORKING
-everything like bluetooth , wifi , gsm , etc etc
SCREENSHOTS BELOW
Click to expand...
Click to collapse
*No MTK Engineer Mode (apk file not present in system)
Francesco Franz said:
*No MTK Engineer Mode (apk file not present in system)
Click to expand...
Click to collapse
yes , i have never been able to implement mtk engineering mode or apk in a lineage rom though..you lose out on that and stock camera generally ..
KevMetal said:
yes , i have never been able to implement mtk engineering mode or apk in a lineage rom though..you lose out on that and stock camera generally ..
Click to expand...
Click to collapse
Camera quality is bad or something else with lineage camera app !
---------- Post added at 03:50 PM ---------- Previous post was at 03:48 PM ----------
KevMetal said:
yes , i have never been able to implement mtk engineering mode or apk in a lineage rom though..you lose out on that and stock camera generally ..
Click to expand...
Click to collapse
*Xposed v88.1 nougat working fine
#any way to deodex nougat based rom apk's ?
LePro 3 : How to install GSI Roms, and where to find them
The point of this discussion is to alleviate the confusion of installing and configuring GSI Roms.
Although many of us would prefer to use fully native Android Pie Roms that are specifically designed for our phones, we do not yet have Official Pie Rom options, and there isn't alot of Beta options to choose from. Consequently, we get bored easily and are always searching something new.
Thankfully, GSI provides a wide range of alternative options and there's nothing wrong with experimentation and quelling our curiosities. In the end, lets just make sure that we continue to support our XDA Le Pro 3 developers, and if you can afford to do something nice for them...Please do so!
This thread is a work in progress and and intended to be a group effort, your participation is very welcome and highly appreciated
The OP will change often to add further information, or to correct inaccuracies, dead links, etc. So remember to check the OP occasionally, for updated information and links for useful add-ons or fixes.
The goal is that participants/you; share experiences, reviews, and suggestions.
In example, which GSI Roms you've tried, what was the experience like, was it worth it the time, did you use add-ons, etc.
If your installation required plugins, add-ons, fixes and what specifically did you use, PLEASE provide the link...etc.
Please don't say that you used a zip file to fix something and then not mention the name of that item.
Again, this a teamwork thread, be descriptive, it helps us understand what works and what doesn't. Be kind, share, discuss, and answer questions with patience and humility. If this is all new to you, feel feel to ask for help. [/I]
For now, I am providing the steps that I personally took to install and try several GSI Roms, See the steps below to get started and try this new GSI option for yourself.
Step 1 - Gather all needed Files
Latest Twrp : https://twrp.me/leeco/leecolepro3.html
Base Rom Currently base rom options are : Lineage 15.1 Treble, AICP 13.1 and Bootleggers ( Trebled Version)
Magisk: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Gapps 9.0 : https://opengapps.org/ (I personally use Nano, or Pico > Best to choose something small )
Lineage 15.1 Treble Build : https://forum.xda-developers.com/le-pro3/development/rom-lineageos-15-0-leeco-le-pro3-t3683720
Lineage Boot: https://mega.nz/#!uuoBiaDK!_6JlNChLg...7ZKRzCcwNI3_p0 (Can also be extracted from 15.1 or any trebled rom)
AICP 13.1 Treble version: https://forum.xda-developers.com/le-pro3/development/rom-aicp-13-0-pro3-aka-zl1-x727-x720-t3698058
Bootleggers https://forum.xda-developers.com/le-pro3/development/bootleggers-rom-x727-x720-t3838454
Preferred GSI Rom: https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
BlackScreen Kernel for Oreo Base : https://androidfilehost.com/?fid=11410932744536996059
BlackScreen Kernels for Pie Base Rom : https://androidfilehost.com/?w=files&flid=285063
___________________________________________________________________________________________
Step 2 - Installation Part 1 - Automated Vendor Option - See Bottom of OP for more Manual vendor flash method
Longterm and recommended - Quick Recovery Method
******Boot to Recovery> Flash Preferred Base Rom > Flash Gapps, Flash Magisk******
1. Choose advanced wipe : Select system, Data, Cache and Dalvik Cache
2. Reboot Recovery
3. Flash Trebled Lineage or Trebled AICP ( from Links above)
4. Reboot Recovery - Flash Rom a second time.
5. Flash Gapps 8.1
6. Flash Magisk 17.1
7. Reboot to recovery, reboot to OS > Must do Basic Setup.
8. After setup - Reboot to Recovery Create full backup> Check Everything.
9. Optional save copy of Backup to PC, this will help you quickly restore the phone should you encounter any issues.
Once you have a full Backup of a your trebelized installation, you are now ready to install GSI Rom.
Some GSI Roms have Gapps included while others do not.
If you chosen GSI rom ( seems ideal) that does not have Gapps, you will need to flash Gapps 9.0
Step 3 - Installation Part 2
GSI Installation Steps
1. Reboot Recovery
2. Do a factory reset
3. Install GSI to system
4. Flash Gapps 9.0 ( if needed)
5. Flash Magisk
6. Reboot to recovery, reboot to OS > Setup GSI > Enjoy!
___________________________________________________________________________________________________________________
ADDONS and ISSUE FIXES ( Only if needed- some GSI's will not have these issues)
Safety Net Fix: https://forum.xda-developers.com/oneplus-5t/how-to/guid-bypassing-safetynet-august-t3837809
Adaptive Brightness Fix : [url]https://forum.xda-developers.com/attachment.php?attachmentid=4581000&d=1535255905
NFC Fix https://mega.nz/#F!kgdGiI6L Key: !_Gr9otePqXOX7yVLtjUxfQ ( Thanks to @ enigmatic92 and @ ademir.dias for providing a working accessible link)
Option 2 NFC Fix : Pie-NFCFix-Universal_v1.zip
Substratum Dark Mode : The Fix is simple join Substratum Beta then use a compatible Pie them
See more information here: https://forum.xda-developers.com/showpost.php?p=77651573&postcount=36
Disable Rounded Corners: https://goo.gl/CcEMzi ( Substratum add-on)
Substratum Beta through Google https://play.google.com/apps/testing/projekt.substratum
Android P dark themes : Pi Dark [substratum]
Here is a free dark overlay to get you started Pie compatible, Open Source, Signed-off-by: Harsh Shandilya
OverLay : https://mega.nz/#F!kAw1WK6I Key: !wtX2GAY2676wjGFiwNwpVg
___________________________________________________________________________________________________________________
Installation Option 2 -
Quicker install Method - You can choose to have no backup at all or save a partial recovery ( System,Root) which is very helpful to have available, if you break your installation
Step 1 - Installation Part 1
Gather your Preferred Base Rom , Gapps, Magisk
Boot to Recovery
Choose advanced wipe : Select system, Data, Cache and Dalvik Cache
Reboot Recovery
Flash Trebled Lineage or Trebled AICP ( see Links above)
Reboot Recovery - Flash Rom a second time.
No Gapps needed ( save alot of time by skipping setup)
Flash Magisk 17.1
Reboot to Recovery Create full backup> Check Everything.
( Note that you are not booting to system, this method install base and provides a recovery, to will help save time when starting over or returning to a standard Rom.)
Optional save copy of Backup to PC, this will help you quickly restore the phone should you encounter any issues.
Once you have your gappless backup of a your trebelized installation, you are now ready to install GSI Rom.
Some roms have Gapps included while others do not.
If you chosen GSI rom that does not have Gapps, you will need to flash Gapps 9.0
Step 2 - Installation Part 2
1. Reboot Recovery
2. Do a factory reset
3. Install GSI to system
4. Flash Gapps 9.0 ( if needed)
5. Flash Magisk
6. Reboot to recovery, reboot to OS > Setup GSI > Enjoy!
The steps listed above assumes that you know the fundamentals of fastboot, using TWRP recovery, etc.
Using GSI’s roms is essentially testing GSI roms, there is no guarantee, although quite a few run extremely well on many devices.
The instructions above are just guidelines, of course as per XDA policy, anything that you choose to flash is done at your own risk
Generic System Image (GSI) list
LePro 3 use type A
Here's a collection of available GSI ROMs, in order to keep it easy to choose what you want.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Treble-Enabled Device Development
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Project Treble
https://forum.xda-developers.com/project-treble
With any GSI Rom, if it doesn't list our phone specifically ( Zl1 or Zl0) then you use the versions Label type A or : arm64 A only
I am personally using Havoc: https://sourceforge.net/projects/hav...0.zip/download
Installing updates - Steps Needed
The Base Rom method is easier a superior to using Trembled TWRP ( for me the using regular Twrp and Base cause the system to have better stability.
To update GSI Rom
You do not need to wipe any vendor partitions.
Place the update in your downloads folder, and unpack it.
Boot to recovery,
Clear simple cache,
Flash GSI rom to system,
Clear caches
Reboot to system > finished.
If you have a bootloop [email protected] reflash lineage boot.
Troubleshooting Tips
Trouble booting/stuck in bootloop ? : Resolution here: https://forum.xda-developers.com/showpost.php?p=77668925&postcount=71
UPDATE - September 20- 2018 - Manual Vendor Method - Using Codeworks New Treble TWRP
Download : twrp-3.2.3-0-20180919-codeworkx-zl1
Install Trebled TWRP
Choose Longterm or Quick method from Above, (regarding creating a backup)
After you have your Recovery, placed unpacked GSI Rom and vendor files on your Storage Drive,
Flash GSI to System
Flash 3 Vendor files
Flash Gapps if needed
Flash Magisk 17.1
Reboot to Recovery, clear cache
Reboot to system
If you have a good suggestion, I will add it to the OP and in will give your full deserved credit
Thanks to following members for their feedback and offer to help keep this thread accurate by providing reviews and their support @rob_z11, @Ramg77, @enigmatic92, @willngg @ademir.dias @4K2K
@*.*.*.* Please do not copy this OP into another thread without providing credit a link to this OP.
So far we we know that the following Roms work on the Leeco pro 3
Benzo, version 9/1
Havoc, most recent version. : Gapps is installed separately - I have experienced no issues at all with this rom. Currently using BlackScreen 5.3. r3
AOSP Extended 9.0 v6' Per @willngg : https://forum.xda-developers.com/showpost.php?p=77652380&postcount=37
If I left anyone out of this post let me know.
If anyone tries a GSI Rom not listed above, and it boot and runs, with success, please let me know so I can update this comment.
Today I installed the latest build of [9.0] [GSI] Pixel Experience P - UNOFFICIAL.
Very good and stable rom, with the same issues of the other GSI (Nfc, mobile network setup, stock camera)
It brings less personalization than Benzo but does not have as many problems with the Gapps that it comes pre-installed.
It's PR2 and it brings September security patch.
I'm noticing that all the GSIs that I've tried so far have a sharpness and screen definition that I did not see in Oreo, it's what I think.
Link: https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
Ramg77 said:
Today I installed the latest build of [9.0] [GSI] Pixel Experience P - UNOFFICIAL.
Very good and stable rom, with the same issues of the other GSI (Nfc, mobile network setup, stock camera)
It brings less personalization than Benzo but does not have as many problems with the Gapps that it comes pre-installed.
It's PR2 and it brings September security patch.
I'm noticing that all the GSIs that I've tried so far have a sharpness and screen definition that I did not see in Oreo, it's what I think.
Link: https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
Click to expand...
Click to collapse
I fully agree!
tsongming said:
So far we we know that the following Roms work on the Leeco pro 3
Benzo, version 9/1
Havoc, most recent version. : Gapps is installed separately - I have experienced no issues at all with this rom. Currently using BlackScreen 5.3. r3
If I left anyone out of this post let me know.
Click to expand...
Click to collapse
First things first, excellent work with the guide step by step, very complete.
I add to the information that there is a new version of Benzo (0912) but it was very difficult to install because the Gapps that are preinstalled have a conflict with the Google Play Store, once all the steps are finished and before starting the first boot of the system , the protection of Google (factory reset protection or FRP) must be removed by means of a PC program, otherwise the initial setting will not go beyond "Searching for Updates". How I said the installation of this Rom is complicated.
Finally in XDA as in the Russian forum 4PDA I read that is about to come out a patch to run the NFC in the GSI Android Pie Roms, hopefully so.
Informative post! Aosip has been treblized too, have not tried it as a base however.
Ace42 said:
Informative post! Aosip has been treblized too, have not tried it as a base however.
Click to expand...
Click to collapse
Thanks,
I am using AICP as a base for Havoc with the boot.img from lineage and Blackscreen 5.3.r3 .
Its a flawless installation, Gapps is installation separately the gapps issue that some GSI Roms bring is avoided completely.
Sound quality, Call Quality, Battery life all excellent. Plus, I have installed all of my usual Magisk mods (alot!) without breaking the install.
Ramg77 said:
First things first, excellent work with the guide step by step, very complete.
I add to the information that there is a new version of Benzo (0912) but it was very difficult to install because the Gapps that are preinstalled have a conflict with the Google Play Store, once all the steps are finished and before starting the first boot of the system , the protection of Google (factory reset protection or FRP) must be removed by means of a PC program, otherwise the initial setting will not go beyond "Searching for Updates". How I said the installation of this Rom is complicated.
Finally in XDA as in the Russian forum 4PDA I read that is about to come out a patch to run the NFC in the GSI Android Pie Roms, hopefully so.
Click to expand...
Click to collapse
Yes, its the 0901 version that has no issues, right?
I only tried the 09/12 version, after seeing your post. and prior to that I was on two separate versions of miui GSI. and 2 versions of P beta
The Miui 10 Oreo version will be excellent once its display bugs are worked out.
tsongming said:
Yes, its the 0901 version that has no issues, right?
I only tried the 09/12 version, after seeing your post. and prior to that I was on two separate versions of miui GSI. and 2 versions of P beta
The Miui 10 Oreo version will be excellent once its display bugs are worked out.
Click to expand...
Click to collapse
That's right, the 0109 is the stable version of Benzo.
Against my principles I passed Antutu to the Pixel Experience 9 that I am testing and it gave me a very good score although I still seem that Android 9 offers the best user experience on this phone and Antutu does not reflect that.
Edit: The phone did not raise temperature while running the Antutu tests.
Incredible work @tsongming!! You are a fine machine....
tsongming said:
Thanks,
I am using AICP as a base for Havoc with the boot.img from lineage and Blackscreen 5.3.r3 .
Click to expand...
Click to collapse
Do you still need the lineageOS boot.img if you're using blackscreen?
Plan on flashing GSI soon. Really appreciate your instructions as they will help me and many others.
tsongming said:
LePro 3 : How to install GSI Roms, and where to find them
The point of this discussion is to alleviate the confusion of installing and configuring GSI Roms.
Although many of us would prefer to use a fully native Android P Rom that is specifically designed for our phones, we do not currently have alot of native options.. In consequence, we get bored easily and are often ready to try something new.
Thankfully, we have options, and there's nothing wrong with experimentation and quelling our curiosities. Lets just make sure that we continue to support our own Le Pro 3 developers, and if you can afford it, do something nice for them
This thread is a work in progress and a group effort, your participation is very welcome and highly appreciated
The OP will change to add or change to add further information or correct inaccuracies. So check the OP occasionally.
The goal here is that all participants/ you to share experiences, reviews, and suggestions. I.E : which GSI Roms have you tried , what was your experience, was it worth it, did you use addons, if so what, can you provide the link...etc. or add ons that they have tried. This should be fun!
For now, I am providing the steps that I personally took to install and try several GSI Roms, See the steps below to try it for yourself..
Step 1 - Gather all needed Files
Latest Twrp : https://twrp.me/leeco/leecolepro3.html
Base Rom Currently two options Lineage 15.1 Treble and AICP Treble version
Magisk: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Gapps 9.0 : https://opengapps.org/ (I personally use Nano, choose something small )
Lineage 15.1 Treble Build : https://sourceforge.net/projects/lin...1.zip/download
Lineage Boot: https://forum.xda-developers.com/att...9&d=1536591029 Can be used with AICP as well.
AICP Treble version: https://forum.xda-developers.com/showpost.php?p=77596157&postcount=4898
Preferred GSI Rom: https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
BlackScreen 5.3.r3 : https://forum.xda-developers.com/showpost.php?p=77596092&postcount=540
ISSUE Resolutions Files
Safety Net Fix: https://forum.xda-developers.com/oneplus-5t/how-to/guid-bypassing-safetynet-august-t3837809
Step 2 - Installation Part 1
Longterm ( recommended - Quick Recovery Method)
******Boot to Recovery> Flash Preferred Base Rom > Flash Gapps, Flash Magisk******
1. Choose advanced wipe : Select system, Data, Cache and Dalvik Cache
2. Reboot Recovery
3. Flash Trebled Lineage or Trebled AICP ( from Links above)
4. Reboot Recovery - Flash Rom a second time.
5. Flash Gapps 8.0
6. Flash Magisk 17.1
7. Reboot to recovery, reboot to OS > Must do Basic Setup.
8. After setup - Reboot to Recovery Create full backup> Check Everything.
9. Optional save copy of Backup to PC, this will help you quickly restore the phone should you encounter any issues.
Once you have a full Backup of a your trebelized installation, you are now ready to install GSI Rom.
Some GSI Roms have Gapps included while others do not.
If you chosen GSI rom ( seems ideal) that does not have Gapps, you will need to flash Gapps 9.0
Step 3
GSI Installation Steps
1. Reboot Recovery
2. Do a factory reset
3. Install GSI to system
4. Flash Gapps 9.0 ( if needed)
5. Flash Magisk
6. Reboot to recovery, reboot to OS > Setup GSI > Enjoy!
___________________________________________________________________________________________________________________
Option 2 - Step 1
Quicker install Method - You can choose to have no backup at all or save a partial recovery ( System,Root) which is very helpful to have available, if you break your installation
Step 1
Gather your Preferred Base Rom , Gapps, Magisk
Boot to Recovery
Choose advanced wipe : Select system, Data, Cache and Dalvik Cache
Reboot Recovery
Flash Trebled Lineage or Trebled AICP ( see Links above)
Reboot Recovery - Flash Rom a second time.
No Gapps needed ( save alot of time by skipping setup)
Flash Magisk 17.1
Reboot to Recovery Create full backup> Check Everything. ( Note that you are not booting to system, this method install base and provides a recovery, to will help save time when starting over or returning to a standard Rom.)
Optional save copy of Backup to PC, this will help you quickly restore the phone should you encounter any issues.
Once you have your gappless backup of a your trebelized installation, you are now ready to install GSI Rom.
Some roms have Gapps included while others do not.
If you chosen GSI rom that does not have Gapps, you will need to flash Gapps 9.0
Step 2
1. Reboot Recovery
2. Do a factory reset
3. Install GSI to system
4. Flash Gapps 9.0 ( if needed)
5. Flash Magisk
6. Reboot to recovery, reboot to OS > Setup GSI > Enjoy!
The steps listed above assumes that you know the fundamentals of fastboot, using TWRP recovery, etc.
Using GSI’s roms is essentially testing GSI roms, there is no guarantee, although quite a few run extremely well on many devices.
The instructions above are just guidelines, of course as per XDA policy, anything that you choose to flash is done at your own risk
Generic System Image (GSI) list
LePro 3 use type A GSI
Here's a collection of available GSI ROMs, in order to keep it easy to choose what you want.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Treble-Enabled Device Development
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Project Treble
https://forum.xda-developers.com/project-treble
Thanks to following members for their feedback and offer to help keep this thread accurate by providing reviews and their support
@rob_z11, @ Ramg77, @DrMyrkurs
Click to expand...
Click to collapse
Excellent job.
Thanks for your contribution and dedication for the our device.
Enviado de meu LEX720 usando o Tapatalk
Hi
Ramg77 said:
First things first, excellent work with the guide step by step, very complete.
I add to the information that there is a new version of Benzo (0912) but it was very difficult to install because the Gapps that are preinstalled have a conflict with the Google Play Store, once all the steps are finished and before starting the first boot of the system , the protection of Google (factory reset protection or FRP) must be removed by means of a PC program, otherwise the initial setting will not go beyond "Searching for Updates". How I said the installation of this Rom is complicated.
Finally in XDA as in the Russian forum 4PDA I read that is about to come out a patch to run the NFC in the GSI Android Pie Roms, hopefully so.
Click to expand...
Click to collapse
I've been running benzo without major problems for days.i updated to 9/12 with no problems.only new prob I found in the update is the mobile network is inaccessible from settings but 3rd party app can access it.no prob with gapps running.no play store issues either.great rom so far.cant wait to try havoc and a few others. Cool thread,thanks.
https://forum.xda-developers.com/le...ject-treble-lepro3-x72x-t3820844/post77636757
This is to fix adaptive brightness
Ascertion said:
Do you still need the lineageOS boot.img if you're using blackscreen?
Plan on flashing GSI soon. Really appreciate your instructions as they will help me and many others.
Click to expand...
Click to collapse
Probably not since Blackscreen overwrites the boot. When I first tried installing GSI's, I was only successful after using the Lineage boot, and the treble Black Screen had not been released yet.
rob_z11 said:
https://forum.xda-developers.com/le...ject-treble-lepro3-x72x-t3820844/post77636757
This is to fix adaptive brightness
Click to expand...
Click to collapse
Thanks, I added it to the OP
Good work with the guide mate
Thank you for this in-depth summary.
Here is my Antutu for the Havoc GSI
Sent from my LEX727 using XDA Labs
I flashed latest aex pie yesterday.just ran it for few hours.everything worked good and fast minus the usual nfc,and few settings arent complete but runs smooth and stable.moved back to latest benzo just cause it's more complete.but aex is still a great option.love options.lol
Here is Jaguar Pie. In addition to familiar Pie features (all of them), you have:
Official Telegram Link: https://t.me/jaguar_Rom_Official
The main thing: Non-treble! So, your vendor is located in system partition, which is NOT available to the entire world, like in treble roms.
1. Hardened/fortified bionic (over 150 commits) to prevent bad behavior by system and third party apps
2. Most runtime processes are read only, which means they can't be exploited to take over the device. I am trying to attack the cause, rather than the symptoms (a specific exploit)
3. Many kernel security features activated, such as 'configuration_integrity', randomization; hardened user copy, etc. Impulse governor added
4. Yama security in kernel
5. Working msm hotplug, which actually plugs/unplugs CPU based on load
6. Wakelock blocker, Alarm blocker etc
7. Gestures, Omni Theming
8. Smart pixels
9. Offline charging
10. Utouch
11. AOD
12. No response to 'type zero' SMS
13. Boot time on a fully settled rom is about 4-5 seconds after Zuk logo
14. Qualcomm's boost framework
Many more features, which I am tired to list.
This is beta, because I don't have the device - relied on @Dr.07 @The.Night.King and @benedict97 - thanks for testing
INSTRUCTIONS:
1. Format System/Vendor (if you have it)/Data/Dalvik/Cache. If you are encrypted in Oreo or encrypted with FBE, you also need a format with factory reset to get rid of encryption. ALSO: FORMAT FACTORY partition, otherwise, you will have 2 sets of vendor blobs, which would create a mess on boot
2. Flash the rom, flash Gapps, reboot and let the rom run, then
3. Back to TWRP to flash Magisk (18.1 is working)
Rom download V1: https://forum.xda-developers.com/devdb/project/dl/?id=31427
This is the initial release. All future updates will be in post #3, as usual.
Credit: MrHacker (I used his device tree as a base) and many others who work on device tree and kernel and obviously AOSP, OMNI, DU, CopperheadOS, Carbon Rom, Xtended and Benzo
Also, credit for a Jaguar bootanimation to @Ashish9 and @The.Night.King who made a logo and header icon
If anyone is interested in Afwall with administrative option restored (app can't be uninstalled, unless confirmed by you): https://forum.xda-developers.com/attachment.php?attachmentid=4739733&d=1554836212
XDA:DevDB Information
[ROM] JAGUAR PIE NON-TREBLE 3.18 KERNEL OFFICIAL, ROM for the Lenovo ZUK Z2 (Plus)
Contributors
optimumpro
Source Code: https://github.com/optimumpr/kernel_zuk_msm8996
Sources for new (May 29) kernel: https://github.com/optimumpr/android_kernel_zuk_msm8996-1
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.1.x
Based On: AOSP, DU, Lineage
Version Information
Status: Beta
Current Beta Version: V1
Beta Release Date: 2019-04-05
Created 2019-04-05
Last Updated 2019-08-07
Screenshots
Some screenshots:
Updates in this post
Those who are coming from treble roms: you need to format Factory partition too, otherwise, you will have 2 sets of vendor blobs, in other words, MESS
August 7. New release.
1. August security patches
2. Google r46
3. Camera should have level 3 now + more
Dirty flashing is fine, if on the previous release. Otherwise, clean flash - wipe Vendor/Factory/System/Data/Cache/Dalvik
Download rom V6: https://forum.xda-developers.com/devdb/project/dl/?id=31753
July 30: New release V5.2 with fixed installation problems:
You could try dirty flash, but I installed clean, then flashed Opengapps, and Firefox installed without any problems, while it didn't on V5.1.
Download rom V5.2: https://forum.xda-developers.com/devdb/project/dl/?id=31733
July 27. New release, v5.1.
This will fix encryption.
The reason it didn't work was the official TWRP. The maintainer (a known pro) put in the wrong size of userdata partition. So, if you ever formatted data on official TWRP, especially with factory reset, your data partition is screwed for the purposes of encryption (no place for crypto footer). I had to install another version of TWRP, and after I did format there, encryption worked. So, I am attaching both the rom and unofficial TWRP by handibuddy. This is also a signed version (as well as the rom itself), so you can re-lock bootloader on this rom: I have been doing this for ages and long before Lineage came up with the idea (you can check my signing guide in Oneplus 5 thread).
Download Rom V5.1: https://forum.xda-developers.com/devdb/project/dl/?id=31727
Download signed TWRP: https://forum.xda-developers.com/devdb/project/dl/?id=31728
Instructions: Rom could be flashed dirty over V5. TWRP could be flashed as image (to recovery) in your existing TWRP or via fastboot.
Just remember, if you want to relock bootloader, encrypt after locking.
July 25. New release, v5
1. July security patches
2. New Night Screen with configurable tint and brightness
3. Support for level 6-6.2 for AVC codecs
4. Option to disable proximity sensor during calls
5. In-CallUi is now themeable
6. Aggressive battery saving mode
7. Latest Lawnchair
Clean flash is required over V4 or if coming from a different rom, in which case you will also need to format vendor or factory partition.
DO NOT ENCRYPT YET!
Instructions:
1. Dirty flash, if already on Jaguar Pie
2. Clean flash, If coming from a different rom, also format vendor/factory/system/data/cache/dalvic
3. Flash the rom, flash GapDirty flash is fine, if on a previous release. Otherwise, clean flash.
Download rom V5: https://forum.xda-developers.com/devdb/project/dl/?id=31725
________________________________________________________________________________________________________
June 6. New release, V4:
1. June security patches
2. Pie r41
Dirty flash is fine, if on a previous release. Otherwise, clean flash.
Instructions:
1. Dirty flash, if already on Jaguar PieClean flash
2. If coming from a different rom, also format vendor/factory/system/data/cache/dalvic
3. Flash the rom, flash GapDirty flash is fine, if on a previous release. Otherwise, clean flash.
Instructions:
1. Dirty flash, if already on Jaguar PieClean flash
2. If coming from a different rom, also format vendor/factory/system/data/cache/dalvic
3. Flash the rom, flash Gapps, reboot, then back to TWRP to flash Magisk
ps, reboot, then back to TWRP to flash Magisk
Download rom V4: https://forum.xda-developers.com/devdb/project/dl/?id=31621
______________________________________________________________________________________________________________________
June 2. Lawnchair update to the latest. Flash in TWRP.
Download Lawnchair: https://forum.xda-developers.com/attachment.php?attachmentid=4770317&d=1559500522
May 31. Rom updated, V3:
1. Major kernel improvements - there is no reason to use my Oreo kernel or any other kernel
2. Flashlight works regardless of 'always on' or 'ambient display' (that required a clean flash)
Instructions:
1. Clean flash recommended - wipe system/data/cache/dalvik
2. If coming from a different rom, also format vendor/factory
3. Flash the rom, flash Gapps, reboot, then back to TWRP to flash Magisk
Download rom V3: https://forum.xda-developers.com/devdb/project/dl/?id=31612
_____________________________________________________________________________________________________________________
May 30. This is an updated version of the new kernel I posted earlier. This one contains my commits + reversed 'power saving' commits. Sometimes, you get things better by reversing.
Unzip, put on internal SD and flash either with TWRP (as image onto boot partition) or via fastboot.
Download new kernel: https://forum.xda-developers.com/attachment.php?attachmentid=4768179&d=1559177914
May 28. Lawnchair update. Flash in recovery:
Download Lawnchair: https://forum.xda-developers.com/attachment.php?attachmentid=4767269&d=1559060237
May 27. Updated release:
1. Fixed toggling flashlight in ambient display
2. Improvements in Qualcomm's boostframework
3. Contactsprovider updated (disappearing contacts)
Could be dirty flashed over V2. Otherwise, clean flash.
Download rom V2.1: https://forum.xda-developers.com/devdb/project/dl/?id=31602
May 25. New release, V2:
1. May security patches
2. Android Pie r37
3. Big changes in frameworks: exec spawning function is severely restricted to all apps, i.e., only one instance is allowed
4. Most resources preloading for exec spawning is disabled. As a result, boot time is shorter, fewer background resources are loaded in ram, which translates into an overall smoother experience.
5. Aggressive battery saving
6. Status bar burn protection
7. Media cover art filter (on lockscreen)
8. Switched to Bromite system webview V74
9. Redone auto-brightness and ambient display: ZukDoze removed, as Customdoze and Amibientdisplay are now builtin (Settings/Display)
10. Lawnchair upgraded: many fixes including Pie recents
11. MusicFX/Equalizer is now themeable
12. Zukparts removed, as spectrum profiles simply don't work, and KCAL could be done via Kernel Adiutor
13. Battery icon Q style
14. Wifi randomization working (Developer Settings)
15. Captive portal detection toggle (Settings/Wifi/Advanced - disable network connectivity check). You can now uninstall Captiveportal and have no 'x' in Wifi and Mobile icons
Instructions:
1. Clean flash required
2. Format system/vendor (or factory, depending on what you have)/data/dalvik/cache; if you were encrypted in Oreo or FBE in Pie, in addition, do factory reset
3. Flash the rom, flash Mind the Gapps or Nano Gaps, reboot. Then back to TWRP and flash Magisk
If your provider's APN is not on the list, set it up and enable. If data doesn't work, then change CDMA subscription in Mobile network to the alternative.
Download rom V2: https://forum.xda-developers.com/devdb/project/dl/?id=31591
__________________________________________________________________________________________________________________
April 9. New release. Lots of changes, mostly in kernel:
1. Inteli-thermal
2. Thermal-engine ported from Jaguar Oreo, so the rom runs about 3 degrees cooler
3. Substantially improved fluidity: according to testers, virtually no lag
Instructions:
1 If on a previous release, flash dirty and wipe dalvik/cache
2. if new, format system/vendor (or factory, depending on what you have)/data/dalvik/cache; if you were encrypted in Oreo or FBE in Pie, in addition, do factory reset
3. Flash the rom, flash Mind the Gapps, reboot. Then back to TWRP and flash Magisk
Download rom V1.1: https://forum.xda-developers.com/devdb/project/dl/?id=31467
_____________________________________________________________________________________________________________________
April 5. Here is the first update, kernel only. Speed improvement.
Just flash boot.img on top of the first release.
Download kernel: https://androidfilehost.com/?fid=1395089523397933955
Finally ?
@optimumpro Thank you. Respect?
Thanks for the work! ?
Woh!!!!...... Waiting for a detailed review by someone.....
Wow finally
vinay069 said:
Woh!!!!...... Waiting for a detailed review by someone.....
Click to expand...
Click to collapse
your prediction turned out pretty accurate about the release date lol
All right, boys and girls. First update: kernel only - speed improvement . Download (in post #3) and flash on top of the first release
Yess! The best! Gonna flash this aftermy exams!
By the way @optimumpro does this contain the dual audio mod which was in Oreo?
Also any screenshots?
GopalKaul said:
Yess! The best! Gonna flash this aftermy exams!
By the way @optimumpro does this contain the dual audio mod which was in Oreo?
Also any screenshots?
Click to expand...
Click to collapse
Screenshots posted. Stereo sound - not yet.
optimumpro said:
Screenshots posted. Stereo sound - not yet.
Click to expand...
Click to collapse
The 1st build is the one I'm using, right? The tweaked dalvik one, so should I flash only the kernel?
BTW can you add GPU driver 331 instead of 319? Since you're using 319 instead of 269, why not 313?
The.Night.King said:
The 1st build is the one I'm using, right? The tweaked dalvik one, so should I flash only the kernel?
BTW can you add GPU driver 331 instead of 319? Since you're using 319 instead of 269, why not 313?
Click to expand...
Click to collapse
Hey brother... Can u help me. ..?
Currently on aex 6.4 and done all this to flash aex..
Now what do i do to go back to beast jaguar?
Shubhi singhal said:
Hey brother... Can u help me. ..?
Currently on aex 6.4 and done all this to flash aex..
Now what do i do to go back to beast jaguar?
Click to expand...
Click to collapse
Just flash rom
The.Night.King said:
The 1st build is the one I'm using, right? The tweaked dalvik one, so should I flash only the kernel?
BTW can you add GPU driver 331 instead of 319? Since you're using 319 instead of 269, why not 313?
Click to expand...
Click to collapse
Kernel only.
venom0207 said:
Just flash rom
Click to expand...
Click to collapse
Seriously?.... Is my twrp correct and nothing to do with vendor and factory at all?
Shubhi singhal said:
Seriously?.... Is my twrp correct and nothing to do with vendor and factory at all?
Click to expand...
Click to collapse
@optimumpro animations r fekked
Shubhi singhal said:
Seriously?.... Is my twrp correct and nothing to do with vendor and factory at all?
Click to expand...
Click to collapse
It is non treble, factory or vendor have nothing to do with it, you can straight away flash the rom
Flashed the ROM.
It took a lot of time to boot.
Swipe up home screen is not showing any options
Recents is not pie recents
Very fast ROM
In some themes, the notifications are invisible
Havoc 3.0 Q gsi fixed build for Huawei P10 Lite
About
Originally Havoc 3.0 Q gsi based on v204 compiled by ExpressLuke , but for Hi6250 some bugs persist , so I managed to fix them and repacked the IMG then highly compressed.
Fixed
* Camera * media ( sound , video , YouTube ..) * NFC * battery usage * auto brightness * phone Info's ( build number , model , manufacturer , device name .. ) * added Havoc bootanimation .
Bugs
* Offline charging ( requires permissive kernel , Labyrinth kernel 2.0 by Dil3mm4 tested * Blurry can be fixed in phh treble settings > Huawei features > 3rd option ( disabling hwcomposer ).
Installation
* Extract img from xz archive * go to TWRP and do a full wipe (system, data, cache, dalvik/art cache) * flash the image in system image partition * flash root (optional) NOTE1: If you are coming from Android 9 flashing root is a MUST DO ! NOTE2: Flash only the Magisk zip linked in this post ! * reboot to System * reboot to TWRP * flash gapps (optional) * Enjoy !!!
Download
https://mega.nz/#!2S4xxQ6C!f0KJlCA_9_yyJzWZAtlNYVJHktSuyyFY7p82kXK4caM
Twrp recommended ( by @Pretoriano80 ):
https://mega.nz/#!LLhBXSzY!3runNNoW9z1tOHSu-heIUhyy-4u8XHvc8rZMsn547so
Magisk.phh:
https://mega.nz/#!uX4k1KjS!2gnUV3IyLt8XXf4NO3RyZEJnt5YNJQ8tY9i11oGfKYM
Credits: @phhusson ExpressLuke @haky 86 @DarkJoker360 @Dil3mm4
Regards!
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Emui 8.x,bootloader unlocked and TWRP
Based On: AOSP
Version Information
Status: Stable
Created 2019-12-01
6 hrs SoT
Hami_Do said:
6 hrs SoT
Click to expand...
Click to collapse
Wow that's really impressive for a 3000 mAh device! Many people aren't getting that on the Note 10 Plus!
Hi! Thats nice, so basically Is a Kirin gsi? Are gapps included?
TureX said:
Hi! Thats nice, so basically Is a Kirin gsi? Are gapps included?
Click to expand...
Click to collapse
No, it's simply Havoc GSI with several fixes included especially for our device/platform and no, gapps are not included (you would have known if you read the first post more carefully )
TureX said:
Hi! Thats nice, so basically Is a Kirin gsi? Are gapps included?
Click to expand...
Click to collapse
For gapps , pico worked for me as it should , from here :
https://sourceforge.net/projects/opengapps/files/arm64/beta/20191114/
Hami_Do said:
For gapps , pico worked for me as it should , from here :
https://sourceforge.net/projects/opengapps/files/arm64/beta/20191114/
Click to expand...
Click to collapse
Hi! I Guess for Who hasn't a working twrp Is not possible to flash gapps. Thanks for your work and sorry for my english
TureX said:
Hi! I Guess for Who hasn't a working twrp Is not possible to flash gapps. Thanks for your work and sorry for my english
Click to expand...
Click to collapse
the suggested twrp in first post works perfectly on most hi6250 ( emui 8 ) , plus it has an option ( exclude OEM path from data wipe ) from there you don't need to format data & internal storage to boot any gsi/dssi AFAIK.
Only sometimes installing gapps requires resize system from advanced wipe menu.
thanks.. any build for havoc 2.9 ?
How can I remove the bottom pad that appears when I want to use the keyboard?
itsm03 said:
thanks.. any build for havoc 2.9 ?
Click to expand...
Click to collapse
the best 2.9 build here:
https://sourceforge.net/projects/ha...90912-phhgsi_arm64_a-Official.img.xz/download
1- wipe system data cache
2-flash havoc 2.9 and boot up to system
3- reboot to twrp and :
4- flash offline charger fix for pie
5- flash nfc patch for pie
6- flash hwcomposer ( follow instructions )
7- flash gapps and magisk ( optional )
Enjoy.
All flashable patches you find them here:
https://forum.xda-developers.com/p10-lite/how-to/gsis-manual-fixes-hi6250-devices-t3936745
ghassan haddad said:
How can I remove the bottom pad that appears when I want to use the keyboard?
Click to expand...
Click to collapse
Join https://t.me/hi6250group telegram group , there you can share your screenshots to understand the issue.
Hami_Do said:
Join https://t.me/hi6250group telegram group , there you can share your screenshots to understand the issue.
Click to expand...
Click to collapse
I Couldn't post pictures since new members need to wait, add to that I got only one answer telling me that it may not be possible.
I was referring to this pad in the picture
Now Gsi's based on v207 and later are stable , here you find latest Havoc Q gsi :
https://sourceforge.net/projects/expressluke-gsis/files/HavocOS/Ten/ARM64/A/
Probably only NFC patch is needed :
https://forum.xda-developers.com/p10-lite/how-to/gsis-manual-fixes-hi6250-devices-t3936745/page3
=========
No way to boot on my phone (WAS-LX1A)...stuck on boot, after some minutes its reboot, other minutes and then goes in erecovery.
I tried also a totally clean install starting with last firmware stock (WAS-LX1AC432B390) install (dload method) and then flashing Havoc 3.0 (based on v207) system file from fastboot.
Nothing to do and I came back beaten to Android 8.0
.....any help pls?
or maybe it is easier to buy a P30 lite
Tx
Toti
Achieve is currupt :-/
i get Error while flashing image, here is the log
Erro 255
I get error while flashing image here is the log
I have the saame problem on WAS-LX1
anvetoti said:
No way to boot on my phone (WAS-LX1A)...stuck on boot, after some minutes its reboot, other minutes and then goes in erecovery.
I tried also a totally clean install starting with last firmware stock (WAS-LX1AC432B390) install (dload method) and then flashing Havoc 3.0 (based on v207) system file from fastboot.
Nothing to do and I came back beaten to Android 8.0
.....any help pls?
or maybe it is easier to buy a P30 lite
Tx
Toti
Click to expand...
Click to collapse
Any help?
Help this guy and me, please!
From my experience with flashing this device it is most likely that either your device is still encrypted or there are magisk leftovers or data partition wasn't wiped correctly, that's causing rom not to boot. And always use pretoriano's twrp_0.5_test, works best. Sometimes it boots to erecovery, but you can try to reboot and it might work then.
NeoPreacher said:
From my experience with flashing this device it is most likely that either your device is still encrypted or there are magisk leftovers or data partition wasn't wiped correctly, that's causing rom not to boot. And always use pretoriano's twrp_0.5_test, works best. Sometimes it boots to erecovery, but you can try to reboot and it might work then.
Click to expand...
Click to collapse
I think you're right, I also think it's due to encryption or data partition (not magisk because I made a clean installation), because I had the same problem, stuck on boot, with all the Roms (PIE and Q) that require TWRP.
The only rom without problems was OpenKirin-OmniROM Pie Alpha 6.2 which does not require a custom recovery for installation !!
Do you have any operational suggestions to give me or I just have to try with pretoriano's twrp_0.5_test ??
What do you think if :
- In a stock recovery I do a factory reset
- From fastboot I do fastboot erase system, userdata and cache (or better to use format command for userdata?)
- the I flash system.img
- then I flash TWRP
- and then install magisk and gapps from TWRP?
TX
Latest rom PixelExperience_clover-13.0-20221110-2311-UNOFFICIAL.zip :
- Android 13.0.0_r23
- January security patch
- 4.19 Nyx Kernel
- OSS cam HAL
- Migrate to Xiaomi power AIDL HAL and common sdm660 powerhint
Download
Installation instructions :
- Perform a backup of your current ROM (optional)
- Use latest 4.19 TWRP created by pix106: (TWRP)
- Perform clean install from TWRP (factory reset, format data and wipe system)
- Flash ROM
What's working:
- All hardware
- Safetynet pass / device certified
What's not working:
Let me know.
Source : https://github.com/PixelExperience
Kernel : clover
Device tree : sdm660
Thanks
Indeed thanks to @sabar our MiPads have had a life beyond what most Android tablets can even dream of.
sabar_op said:
Initial rom PixelExperience_clover-13.0-BETA-20220913-1445-UNOFFICIAL.zip :
- Android 13.0.0_r4
- September security patch
- 4.19 Nyx Kernel
Download
Installation instructions :
- Perform a backup of your current ROM (optional)
- Perform clean install from twrp (factory reset, format data and wipe system)
- Flash ROM.
What's working:
- All hardware
- Safetynet pass / device certified
What's not working:
Let me know.
Source : https://github.com/PixelExperience
Kernel : clover
Device tree : sdm660
Click to expand...
Click to collapse
We can't use Google services in China. Can you provide a version without Google services?
Thanks
rerbin said:
We can't use Google services in China. Can you provide a version without Google services?
Thanks
Click to expand...
Click to collapse
I think PixelExperience doesn't has a version without google service.
I booted it on Mi pad 4 (non-plus), but only black screen and power menu.
Ik this is only for plus, I just want to inform you about this.
Thank you for the new ROM!
As Ralph Chen have mentioned above, does it mean this can only be used for Mipad 4 Plus?
Mipad 4 would not be able to upgrade to Android 13?
Ralph Chen said:
I booted it on Mi pad 4 (non-plus), but only black screen and power menu.
Ik this is only for plus, I just want to inform you about this.
Click to expand...
Click to collapse
Clean install? One user test it with mi pad 4 non plus...it's running ok.
sabar_op said:
Clean install? One user test it with mi pad 4 non plus...it's running ok.
Click to expand...
Click to collapse
Yes, clean
sabar_op said:
Clean install? One user test it with mi pad 4 non plus...it's running ok.
Click to expand...
Click to collapse
Apparently I did something wrong…
Mcmug88 said:
As Ralph Chen have mentioned above, does it mean this can only be used for Mipad 4 Plus?
Mipad 4 would not be able to upgrade to Android 13?
Click to expand...
Click to collapse
sabar_op said:
Clean install? One user test it with mi pad 4 non plus...it's running ok.
Click to expand...
Click to collapse
Turns out I somehow have a corrupted TWRP. Now it’s working fine. Thank you and sorry for the inconvenience.
sabar_op said:
Clean install? One user test it with mi pad 4 non plus...it's running ok.
Click to expand...
Click to collapse
Hi Sabar, Tried to Flash 13 normally but it always reboot into TWRP. Tried flashing 13 together with Clover Kernel-Nyx-20220726 on my Mipad 4 wifi and it's fine. Not sure why.
However find the App Grid missing. No where to be found when I goes to the Wallpaper & Style setting. Can you help?
Solved. Boot into safe mode and reboot it and the Grid settings appears.
The ROM seems to work quite well. However, some of my former moded Apps crashing right after start. I suppose they are not compatible with A13.
Perform clean install from twrp (format data and wipe system) and Flash ROM.
restart but system stop at wifi page, I connected wifi but didn't display next step button.
then I return twrp prepare reinstall, but couldn't format data and wipe system. Before flashing, my system was lineage-19.1-20220812-UNOFFICIAL-clover.zip. Is it because I did not make factory settings?
Is it possible to roll back to lineage-19.1 after flashing?
signmeok said:
Perform clean install from twrp (format data and wipe system) and Flash ROM.
restart but system stop at wifi page, I connected wifi but didn't display next step button.
then I return twrp prepare reinstall, but couldn't format data and wipe system. Before flashing, my system was lineage-19.1-20220812-UNOFFICIAL-clover.zip. Is it because I did not make factory settings?
Is it possible to roll back to lineage-19.1 after flashing?
Click to expand...
Click to collapse
Did you use twrp 4.19?
sabar_op said:
Did you use twrp 4.19?
Click to expand...
Click to collapse
Download twrp-3.6.2_9-0-clover.img
Download page for twrp-3.6.2_9-0-clover.img
dl.twrp.me
last twrp ver 3.6.2_9
oh, where download twrp 4.119 please
signmeok said:
Download twrp-3.6.2_9-0-clover.img
Download page for twrp-3.6.2_9-0-clover.img
dl.twrp.me
last twrp ver 3.6.2_9
oh, where download twrp 4.119 please
Click to expand...
Click to collapse
twrp-4.19-3.6.2_9-clover-20220818-1351.img | Tool by pix106 for Mi Pad 4
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
sabar_op said:
twrp-4.19-3.6.2_9-clover-20220818-1351.img | Tool by pix106 for Mi Pad 4
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Click to expand...
Click to collapse
Thanks a lot, I try