Develop Bugs

Lenovo tab 3 7 (tb3-730x) custom roms + custom recoveries

By flashing a custom rom, your warranty is void 0ooh wait its void the moment you unlock bootloader.
FOLLOW INSTRUCTIONS!!! to avoid bricked devices. ask where need be!.
Not the best tab (i mean performance wise is almost pathetic), but hey!! i mean i searched for custom roms but couldnt find-the stock lagged with install of just two to three apps. Didnt like the look too. I have managed to port 2 roms for our beloved TAB.
LINKS BEFORE CREDITS!
PORTED
1= FLYME OS 6.7 based on LENOVO K4 NOTE concept
2= LINEAGE OS 7.1.1 (currently using) based on Allview V2_Viper
PREPARE TAB FOR CUSTOM ROMS
as always;
UNLOCK BOOTLOADER first (fastboot oem unlock)
FLASH TWRP by 0xAF (fastboot flash recovery ******)
***make a full backup of stock before flash
clear data/system etc before flash
then FLASH AWAY.. clear cache after. (reboot; DONE...)
As ABRHAM BEBH says; there is no ported ROM without BUGS; suprisingly i only detected a few bugs (major)
FLYME bugs..
1= NO SIM
2= CAMERA CANT CONNECT
3=NO SOUND
***these were the only bugs present after port
LINEAGE
1=SOUND WITH WHITE NOISE
2=CAMERA CANT CONNECT
3=NO IN CALL SOUND, UNLESS LOUD SPEAKER
***these were the only bugs present after port
I Manage to fix a few in both ROMS;
FLYME
1=FIXED NO SIM-working perfectly
2=FIXED NO SOUND-working perfectly
****BUG REMAINING =CAMERA CANT CONNECT
LINEAGE
1=FIXED WHITE NOISE- sound working perfectly
****BUG REMAINING =CAMERA CANT CONNECT
=NO IN CALL SOUND, UNLESS LOUD SPEAKER- *calls unless loudspeaker
These ROMS have been ported from 6753 chipset..if that will come in handy to fix camera
i was hoping i could make this thread after i have fixed all bugs, but nahh!! i think i have tried enough and i will need help to fix remaining BUGS
******I can NO LONGER OFFER fixs..as I gave away the TAB..
***the ROMS are coming with PATCHES to fix mentioned fixed bugs..
the only payment i want is HIT the LIKE button,, come on!!:good:
LINKS
Find TWRP from 0xAF thread.. THANK him too for his recovery, thats why i havent posted the direct link to recovery https://forum.xda-developers.com/general/rooting-roms/recovery-twrp-3-0-2-lenovo-tab3-7-tb3-t3468589
My SP FLASHTOOL flashable stock 6.0 firmware https://mega.nz/#!h0cESAxY!ZOZRDxtryIB8IETJ3TTMh9_o67MucHz6GvyKxsYMbg0 (in case you mess up or want to revert to stock)
*** CERTIFICATE for USE with SP FLASHTOOL
https://forum.xda-developers.com/general/rooting-roms/sp-flashtool-authentication-file-t3613145
TWRP 3.1.1 by ME **report any bug https://mega.nz/#!RtUU3BjL!Gt2G9c7N7VLWbDjMGd9AlESJjIxa5a0_4eK9PLDADlU
ROMS uploaded
LINKS READY-
FLYME 6.0
ROM
https://mega.nz/#!I5VzyCgY!oDyo6BBp0v_sllku8tkZu6iOIxhQEXWhlIdSsmJw75I
PATCH FLYME FIX
https://mega.nz/#!lhUygbQJ!C81dWZDaal4EjucR0jw8zED4DdLWwY2LvX7lZIPpJfs
LINEAGE 14
ROM
https://mega.nz/#!J4cTiYIQ!J35IQp_KMjSUnmztZiEDnc8PVxyIpdC1HVBTJvHZFFU
LINEAGE custom boot (NEW)..!
https://mega.nz/#!JwsTmaQA!jlW7L5AGkGZ1BQ66_lH7XHEqnG3cEHQ0IiWpssgSKBU
*Flash to fix error.. give feedback if it works (no longer have the tab to test)....++this fixes boot failure
PATCH LINEAGE FIX
https://mega.nz/#!JkdVWITA!Sv7YaXaGb-JWh71j-JZFYndN_zG9cSE0fzb4Yynf1ss
...thank you
Try and give feed back..
check screenshots of LINEAGE 14 on ATTACHMENTS
CREDITS
Amit Kumar=Gionee F103pro
Iacob Ionut
0xAF
ABRHAM BEBH

Thank you for your effort to port the roms. I was too lazy to start something like this, but I'm glad you did it.
Thanks, I will try them soon and see if I can help with some of the bugs.

Lenovo TAB3 7 TB3-730X is slow & Lagging
Sir, can you tell me that this Custom Rom Smooth and not lagging ?

Pendik85 said:
Sir, can you tell me that this Custom Rom Smooth and not lagging ?
Click to expand...
Click to collapse
Both roms are very smooth.. but have some bugs that need fixing

0xAF said:
Thank you for your effort to port the roms. I was too lazy to start something like this, but I'm glad you did it.
Thanks, I will try them soon and see if I can help with some of the bugs.
Click to expand...
Click to collapse
Sure...

dmilz said:
Sure...
Click to expand...
Click to collapse
Do you have any download links?

0xAF said:
Do you have any download links?
Click to expand...
Click to collapse
uploading right now... Will post links later

I started working on Lineage porting from source on this.
Anyone able to help just pm me so i can add him/her to the project.

can you send the links of the ported roms?

is there a chance to work on tb3-710i ?
thx

sfvam said:
is there a chance to work on tb3-710i ?
thx
Click to expand...
Click to collapse
I doubt.. don't try unless you can escape a bootloop worse a brick

MakedoSan said:
can you send the links of the ported roms?
Click to expand...
Click to collapse
Links ready
Download and flash away

Demetris said:
I started working on Lineage porting from source on this.
Anyone able to help just pm me so i can add him/her to the project.
Click to expand...
Click to collapse
Good news ey.. probably one with no bugs will be coming about soon.

Thanks dmilz for the time develop these ROMs. But the lineageOS zip cannot be flashed, it said "ERROR: 7" (can't install this package on top of incompatible data...). Do I need to do a system wipe before flashing?

nix9756 said:
Thanks dmilz for the time develop these ROMs. But the lineageOS zip cannot be flashed, it said "ERROR: 7" (can't install this package on top of incompatible data...). Do I need to do a system wipe before flashing?
Click to expand...
Click to collapse
I already do a full wipe before flashing and it seems ok with error "E: unknown command []]".
Once booted it keep booting into the custom recovery.

nix9756 said:
I already do a full wipe before flashing and it seems ok with error "E: unknown command []]".
Once booted it keep booting into the custom recovery.
Click to expand...
Click to collapse
I have the same issue, did a full wipe.
EDIT: FlymeOs works but not Lineage

nix9756 said:
I already do a full wipe before flashing and it seems ok with error "E: unknown command []]".
Once booted it keep booting into the custom recovery.
Click to expand...
Click to collapse
Issue noted.. download the modded boot image in op (just added) .flash it after room install.. then reboot to system..
Give me feedback after

Kellicros said:
I have the same issue, did a full wipe.
EDIT: FlymeOs works but not Lineage
Click to expand...
Click to collapse
Just hit the thanks button for me....
Glad you gave FLYME a try... Give LINEAGE a try with the new boot.img added in op

dmilz said:
Just hit the thanks button for me....
Glad you gave FLYME a try... Give LINEAGE a try with the new boot.img added in op
Click to expand...
Click to collapse
Already did, too bad you don't have the tab to work on this anymore.

Kellicros said:
Already did, too bad you don't have the tab to work on this anymore.
Click to expand...
Click to collapse
Yeah its sad..Has is worked with the new boot.img?

Zenfone 5 ZE620KL Project Treble GSI Test

After days of deciding..
Yes!! i have risked my device warranty for the sake of fun and excitement. HAHA LOL
For those who asked if we can flash Treble GSI (Generic System Image) on our device. The answer is Yes, FOR ME AT LEAST!
No complicated steps or whatsoever.
I just followed the steps from this link and downloaded the GSI of my choice. CREDITS TO ALL THE DEVELOPERS WHO WORKED FOR THIS PROJECT.
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
TRY THIS AT YOUR OWN RISK! I will not be held accountable to whatever happens to your device. This post is just to prove that indeed our device is treble enabled.
Some important things to note:
- You have backup of your data
- You have a working ADB
- There might be functionalities that is not working at the moment (Read the changelogs of your GSI choice before downloading)
- The notch looks bad on these builds (Android P might be able to fix this when it arrives)
- Your device should be in stock ROM (no heavy modifications such as xposed , magisk etc..) ROOT Not needed
- You should put your device on factory reset before trying this.
I have attached some screenshots of my test.
LINK TO Treble-Enabled Device Dev
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
THANK ME LATER! PEACE OUT!

good job!

Yes great job hows the camera working for you

grodri19721 said:
Yes great job hows the camera working for you
Click to expand...
Click to collapse
Lineage includes a very basic camera. just photo and video no portrait mode etc..
Lineage also has no gapps, i dont have twrp to flash gapps still figuring out how to install it.
I switched to the PixelExperience rom its great and with gapps included.

illustrasszo27 said:
Lineage includes a very basic camera. just photo and video no portrait mode etc..
Lineage also has no gapps, i dont have twrp to flash gapps still figuring out how to install it.
I switched to the PixelExperience rom its great and with gapps included.
Click to expand...
Click to collapse
android p preview 2 developer?

Everything functional?, no bugs?

el canario said:
android p preview 2 developer?
Click to expand...
Click to collapse
No. Its Android 8.1
There is no gsi for Android P yet.

DocRambone said:
Everything functional?, no bugs?
Click to expand...
Click to collapse
The only bug i have notice so far in PixelExperience is sometimes mobile data does not turned on when you toggle it in the quick tiles. you have to restart your phone then it will work after that.

illustrasszo27 said:
The only bug i have notice so far in PixelExperience is sometimes mobile data does not turned on when you toggle it in the quick tiles. you have to restart your phone then it will work after that.
Click to expand...
Click to collapse
You have the Z version with 845-chipset?

DocRambone said:
You have the Z version with 845-chipset?
Click to expand...
Click to collapse
No this is the lower version. with snapdragon 636

im still waiting on android P rom XD

Is the status bar at the top still messed up on the pixel experience ROM?

hands0m3 said:
Is the status bar at the top still messed up on the pixel experience ROM?
Click to expand...
Click to collapse
Yes. same as with lineage. for me its tolerable since no information is being shown at that part of the status bar.

Do you think changing the dpi would help with that

hands0m3 said:
Do you think changing the dpi would help with that
Click to expand...
Click to collapse
I'm not sure bro. One thing i tried is changing the display size in settings. It looks better but everything looks so big. so i reverted to the default one.

Sir could you possibly upload the stock recovery.img of our device.? im stuck on TWRP and i cant flash regular OTA update from there

jrd1990 said:
Sir could you possibly upload the stock recovery.img of our device.? im stuck on TWRP and i cant flash regular OTA update from there
Click to expand...
Click to collapse
What ROM are you using right now? i think you can extract it from the image of that ROM. sorry if this not as helpful.

he is on Stock Rom and he would like one guy put the stock recovery.img here

Excellent job. Thank you. I understand the camera is basic, but how is image quality? Looking forward to Google Camera port tests. And perhaps the ZE620KL fully ported so can make use of the landscape camera. Not a huge deal, but would be nice, no?

As visible on screenshot, Asus Camera is properly visible in the launcher (because of being put to vendor by Asus), but does it run well?

[Oreo][8.1.0]Lineage OS 15.1

[Oreo][8.1.0]Lineage OS 15.1 C103/C106/Leree
Work:
- Bluetooth (A2DP too)
- RIL
- Wifi
- LED
- Native brightness
- Magisk modules
- OMX
- Camera
- Video encoding (4k)
- ... all
- IR (LeeRemote)
- Stable
Not work:
- Tell me
Download
Camera 2 API Fix
MOD Edit :- Links Removed
you need turn on Camera 2api in build.prop
Beta 1:
MOD Edit :- Links Removed
Gapps
MOD Edit :- Links Removed
If you need gaps install opengaps after installing rom!
Do not start device and then install gapps!
Donate:
MOD Edit :- Links Removed

great! thank you for nice work. my Cool1 is on the way shipping so I'll install after receive the phone.
by the way, could you release device tree of LOS15.1 of Cool1?
I think it is very helpful to develop all other Custom Roms.

Very nice rom. Just installed Everything works so far.
Any chance to have the stock camera working?

Thank you for your hard work，it must be a very nice rom

qqspm said:
Very nice rom. Just installed Everything works so far.
Any chance to have the stock camera working?
Click to expand...
Click to collapse
I can try port stock camera from LOS 14.1

SimbyOS said:
I can try port stock camera from LOS 14.1
Click to expand...
Click to collapse
Wait for that and fix gcam too
Btw los 15.1 cooling than jui oreo and nougat rom

thanks for your work.
I would like to use RR so could you build RR for Cool1?
thanks.

Sound and gcam not work

A stable Miui 10 with everything working like stock cam,IR could be worth giving a shot as a daily driver..

cant install on top of EUI..should i install the JUI first??? im using a leree le 3 by the way...

nvenezuela said:
cant install on top of EUI..should i install the JUI first??? im using a leree le 3 by the way...
Click to expand...
Click to collapse
First, overwrite your current TWRP with modified one by Cuoco92. Then, install JUI by Simby. From then on, you are free with switching ROMs.

szakisz said:
First, overwrite your current TWRP with modified one by Cuoco92. Then, install JUI by Simby. From then on, you are free with switching ROMs.
Click to expand...
Click to collapse
i already have the cuoco92 twrp on my LeRee Le 3. I cant find the "JUI by SYMBY" though. Can you provide a link to that JUI??

nvenezuela said:
i already have the cuoco92 twrp on my LeRee Le 3. I cant find the "JUI by SYMBY" though. Can you provide a link to that JUI??
Click to expand...
Click to collapse
It's here… On this forum, in this section. Go back a page to "Coolpad Cool1 ROMs, Kernels, Recoveries, & Other Development" and find the thread "[C103/Leree][Oreo][Android 8.0.0] JUI". It's written by SimbyOS. Download the rom, install it and you're good to go

SimbyOS said:
[Oreo][8.1.0]Lineage OS 15.1 C103/C106/Leree
Work:
- Bluetooth (A2DP too)
- RIL
- Wifi
- LED
- Native brightness
- Magisk modules
- OMX
- Camera
- Video encoding (4k)
- ... all
- IR (LeeRemote)
- Stable
Not work:
- Tell me
Download
Camera 2 API Fix
https://drive.google.com/file/d/1GO2XceaMe6Ujaf7pprWxaXdudQijBZ_0/view?usp=sharing
you need turn on Camera 2api in build.prop
Beta 1:
https://drive.google.com/file/d/1DTnLksBzkNgoufZepQEgEkJnnF6GtI0Z/view
Gapps
http://opengapps.org
If you need gaps install opengaps after installing rom!
Do not start device and then install gapps!
Donate:
1529yLvkmQHqhtgcDkYyZ7VgYxHnUyxefj (Bitcoin)
Click to expand...
Click to collapse
SymbyOs... Do i really need to install the JUI on my leree le 3 before installing this LOS ROM??
---------- Post added at 09:43 AM ---------- Previous post was at 09:40 AM ----------
szakisz said:
It's here… On this forum, in this section. Go back a page to "Coolpad Cool1 ROMs, Kernels, Recoveries, & Other Development" and find the thread "[C103/Leree][Oreo][Android 8.0.0] JUI". It's written by SimbyOS. Download the rom, install it and you're good to go
Click to expand...
Click to collapse
Yes i already saw that one. And was told that i first need to install the JUI VIA COOLPAD ASSISTANT..

nvenezuela said:
Yes i already saw that one. And was told that i first need to install the JUI VIA COOLPAD ASSISTANT..
Click to expand...
Click to collapse
Maan, all these ROMs here can be installed only on top of Android 7 or higher. That's why you got an error. I got the same. You don't have to use COOLPAD ASSISTANT. This is modified version of JUI. It is used only for upgrading the Android version.

mamarama9904 said:
great! thank you for nice work. my Cool1 is on the way shipping so I'll install after receive the phone.
by the way, could you release device tree of LOS15.1 of Cool1?
I think it is very helpful to develop all other Custom Roms.
Click to expand...
Click to collapse
Port from leeco s2 with fix bug

szakisz said:
Maan, all these ROMs here can be installed only on top of Android 7 or higher. That's why you got an error. I got the same. You don't have to use COOLPAD ASSISTANT. This is modified version of JUI. It is used only for upgrading the Android version.
Click to expand...
Click to collapse
So you mean to say that i can install the JUI by Cuoco92 and from then on i can flash these roms??

nvenezuela said:
So you mean to say that i can install the JUI by Cuoco92 and from then on i can flash these roms??
Click to expand...
Click to collapse
TWRP by Cuoco92 and JUI by SimbyOS from here: and yeah, you can do that with no problem. I faced that problem too. It took me couple of hours to figure out the solution. You can even install the roms that are not officially on XDA. There are a few on the web. Just google them.

avishek83 said:
A stable Miui 10 with everything working like stock cam,IR could be worth giving a shot as a daily driver..
Click to expand...
Click to collapse
link please

szakisz said:
TWRP by Cuoco92 and JUI by SimbyOS from here: and yeah, you can do that with no problem. I faced that problem too. It took me couple of hours to figure out the solution. You can even install the roms that are not officially on XDA. There are a few on the web. Just google them.
Click to expand...
Click to collapse
Tnx for constantly replying bro.
But the problem is SimbyOS himself told me that i need to install the JUI via the Coolpad Assistant first before installing the JUI that you just refered me to.
Im using a Leree Le 3 bro.
---------- Post added at 08:15 AM ---------- Previous post was at 08:09 AM ----------
szakisz said:
TWRP by Cuoco92 and JUI by SimbyOS from here: and yeah, you can do that with no problem. I faced that problem too. It took me couple of hours to figure out the solution. You can even install the roms that are not officially on XDA. There are a few on the web. Just google them.
Click to expand...
Click to collapse
I already have the Cuoco92 TWRP 3.1.1 installed on my Leree Le 3. So you mean to say that if i have installed the Cuoco92 TWRP, which i already did, i can install the JUI by SimbyOS??

Query regarding oxygen os GSI port

Hello,
Is it possible to flash gsi oxygen os 5.1.6 rom on our device?
The rom is located in the thread below:
https://forum.xda-developers.com/pr...ly-roms/gsi-oxygen-os-5-1-6-boos4721-t3859240

arun356y said:
Hello,
Is it possible to flash gsi oxygen os 5.1.6 rom on our device?
The rom is located in the thread below:
https://forum.xda-developers.com/pr...ly-roms/gsi-oxygen-os-5-1-6-boos4721-t3859240
Click to expand...
Click to collapse
I am waiting for a reply to this thread as well. If someone tries please let us know.
UPDATE:
I got it to boot using AEX 5.8 vendor, but after setting up it keeps crashing and shutting down.

varunbiday said:
I am waiting for a reply to this thread as well. If someone tries please let us know.
UPDATE:
I got it to boot using AEX 5.8 vendor, but after setting up it keeps crashing and shutting down.
Click to expand...
Click to collapse
It needs device specific modifications I guess. We need devs to look on this rom.

arun356y said:
It needs device specific modifications I guess. We need devs to look on this rom.
Click to expand...
Click to collapse
Yes! I'm sure devs can find ways to get everything working, it'll be an awesome port for our device. I hope this happens

arun356y said:
Hello,
Is it possible to flash gsi oxygen os 5.1.6 rom on our device?
The rom is located in the thread below:
https://forum.xda-developers.com/pr...ly-roms/gsi-oxygen-os-5-1-6-boos4721-t3859240
Click to expand...
Click to collapse
answer : yes.
i did experimented with it, got everything to work except the gcam no 3rd party cams. rom is very snappy and responsive but haven't don any gaming on it.
I had to work on h2os so haven't work further on this and i have exams coming up, gonna be busy till december and also fixing gcam is not my cup of tea, so if any one want to work on this i will upload the files and details regarding this.

Dhananjay_Yadav said:
answer : yes.
i did experimented with it, got everything to work except the gcam no 3rd party cams. rom is very snappy and responsive but haven't don any gaming on it.
I had to work on h2os so haven't work further on this and i have exams coming up, gonna be busy till december and also fixing gcam is not my cup of tea, so if any one want to work on this i will upload the files and details regarding this.
Click to expand...
Click to collapse
I will be happy to try it, although I don't have any previous knowledge regarding this.
@narshi shukla bro please you take up the project, you have more experience.

@narshi shukla
bro we know u worked really hard for miui and on other roms.....and we r relly thankful to u....
I hope you can have a look at this rom

@narshi shukla Please take a look on this

Gagandaywal said:
@narshi shukla Please take a look on this
Click to expand...
Click to collapse
I have already looked on this, not only this but various other similar ports, including pie ones.
The major issue is camera, which seems near impossible to fix, so it won't make sense as we already have proper Oreo and nougat ports of this rom
and pie ports(both miui and oos/h2os) won't boot on our device without proper pie vendors, which our device don't have, the treble flag is disabled on treble pie roms, enabling it causes various crashes and makes rom boots but its unusable,waiting for senior devs to fix it or any workaround.

narshi shukla said:
I have already looked on this, not only this but various other similar ports, including pie ones.
The major issue is camera, which seems near impossible to fix, so it won't make sense as we already have proper Oreo and nougat ports of this rom
and pie ports(both miui and oos/h2os) won't boot on our device without proper pie vendors, which our device don't have, the treble flag is disabled on treble pie roms, enabling it causes various crashes and makes rom boots but its unusable,waiting for senior devs to fix it or any workaround.
Click to expand...
Click to collapse
Thanks for seeing this post and replying. I think we can count on OOS Pie coming for the OP3 soon, it has the same chipset so it should be much easier to port

Camera solution for Android 10 Custom Roms?

Hello Guys, thank you for joining me on this thread.
My question is :
I'm planning to Install Twrp and flash an android 10 custom rom. But in order to do that, I want to know if there's is Gcam, OOS cam or anyother camera module which I can use to retain the quality of pictures. If so, please link it here, I will try them ALL out, and others can use this thread as well. :angel:

You found something?

Nope. Literally no one has replied. Lol. Gcam could work, if installed properly. But I can't find how. Only installing the app gives pink bars, green tint and fc. Surely there's another way, a magisk module or settings to get it right. Haven't found it as of now. But derp Android 10 rom has the best cam in-built, even better than OOS people opinionate.

Unofficial CarbonRom https://forum.xda-developers.com/showpost.php?p=81004725&postcount=33

bythelaw said:
Nope. Literally no one has replied. Lol. Gcam could work, if installed properly. But I can't find how. Only installing the app gives pink bars, green tint and fc. Surely there's another way, a magisk module or settings to get it right. Haven't found it as of now. But derp Android 10 rom has the best cam in-built, even better than OOS people opinionate.
Click to expand...
Click to collapse
Hey
After banging my head for hrs, I finally got it running fully functional with the help of a kind guy at carbon thread. If you want, i can share the exact files with you on tg. Or you can find themselves on tg gcam grp.

bythelaw said:
Hello Guys, thank you for joining me on this thread.
My question is :
I'm planning to Install Twrp and flash an android 10 custom rom. But in order to do that, I want to know if there's is Gcam, OOS cam or anyother camera module which I can use to retain the quality of pictures. If so, please link it here, I will try them ALL out, and others can use this thread as well. :angel:
Click to expand...
Click to collapse
You can try out the Arnova GCam ports on https://www.celsoazevedo.com/files/android/google-camera/
But remember to flash the Magisk fix module first - check this link out
https://telegra.ph/GCam-OP5T-Frequently-Asked-Questions-07-17

dandrake47 said:
You can try out the Arnova GCam ports on https://www.celsoazevedo.com/files/android/google-camera/
But remember to flash the Magisk fix module first - check this link out
https://telegra.ph/GCam-OP5T-Frequently-Asked-Questions-07-17
Click to expand...
Click to collapse
Thank you, works great.

Sjain11 said:
Hey
After banging my head for hrs, I finally got it running fully functional with the help of a kind guy at carbon thread. If you want, i can share the exact files with you on tg. Or you can find themselves on tg gcam grp.
Click to expand...
Click to collapse
I too joined the group and got all the files. With the .xml file and flashing dotfix, it all works fine now.

bythelaw said:
Thank you, works great.
Click to expand...
Click to collapse
Which versions of gcam and configs xml(if) are working for you, and on which rom?

bud7dha said:
Unofficial CarbonRom https://forum.xda-developers.com/showpost.php?p=81004725&postcount=33
Click to expand...
Click to collapse
Thank you, your message helped. :good:

Sjain11 said:
Which versions of gcam and configs xml(if) are working for you, and on which rom?
Click to expand...
Click to collapse
I was on lineage os 17. But now I switched to stock Oos 9.0.9. So I'm using this gcam on stock debloated.
gcam version : Gcam_6.2.030_Advanced_V2.2.2beta2.190910.1840.apk
Xml : arnova-6.2beta-op5-steve.xml