Does anyone have any experience replacing the motor on this watch? This morning it stopped vibrating. I have attempted a full reset of the watch, charging, changing the settings to double or long vibrate.
I know on some of the watches, the motor is in the battery, but I cannot seem to find where the motor is on this watch.
Related
After I had my Z1 compact(Japanese Version) two weeks, I started having this vibration issue. When I type very fast the vibration feedback disappear, vibration even failed in vibration test. When I shake the phone the vibration comes back, but when I type fast again vibration disappear again. Some ppl on sony forum said it's normal, one of them made the vibration of Z1 compact disappeared on many new phones in an O2 shop. I don't think this is true, it must be a hardware issue. I opened the back cover of Z1 compact and replace a vibration motor, then this issue never happen again.
I do have this problem too.
You replaced the vibration motor with an original one from Sony?
I have the same issue too, but i think its software releated. Im already on my 3rd z1c and i had this issue on all of them, on the first one i had i had them replace the vibration motor and that didnt help.
ponchofiesta said:
I do have this problem too.
You replaced the vibration motor with an original one from Sony?
Click to expand...
Click to collapse
I don't think Sony produce vibration motors. I just bought one from Taobao.com that fits for Z1 compact and replaced it. It works fine now. It's a very small piece, I think Z series mobile used the same vibration motor.
crazyscow said:
I have the same issue too, but i think its software releated. Im already on my 3rd z1c and i had this issue on all of them, on the first one i had i had them replace the vibration motor and that didnt help.
Click to expand...
Click to collapse
I'm sure it's a hardware issue. I tested it. when the vibration motor stopped vibrating, I touched the vibration motor, the vibration motor heated up very hot. but after i replace the vibration motor, i don't have the vibration issue anymore, even the newly replaced vibration motor vibrated for a long time about one minute, the vibration motor is not over heat.
thx for the 'shake it' hint, it works! :good:
Me too!
when the vibration motor stopped vibrating. I shake it and vibrating is normal.
Hello I have thé same issu With z1 i change the vibrator too and put à New back cover for the water resistance !!!!
And everything is good know
Where did you buy the motor from? I'd like to replace mine, but because I'm having an issue with the vibration being WAY too intense on my z1c.
It's obnoxiously loud, and more disruptive than my phone volume being on. I've had to turn off all haptic feedback because anyone within 10 feet of me can hear the feedback. If I get an incoming message or notification while I'm on a call, the person on the other line can hear it very loudly too. I've tried to go through the settings to see if there is a way to turn down the haptic feedback, but I only found one under the stock keyboard settings and it didn't seem to make a difference.
To buy try mobile24.com
I cant figure out why this is happening but when i am in the call on speakerphone the phone will sometimes just turn off speaker and revert to the phone earpiece but the software still thinks its in speaker mode thus the only way to go back to speaker is to change the audio to handset first then reenable speaker.. this can sometimes happen several times withing a single call. I also have an android wear watch that is paired via bluetooth which i though may be the culprit but i have noticed it even when my watch is dead... anyone else?
Having same issue when connected to Bluetooth in my car. It will change output and I have to manually put it on phone headset then back. Sometimes it will just drop a call all together. Usually 6 minutes approx into the call. I am on Verizon 7.1.1. NMF260. Anyone else still having these issues on most recent update as I am.
Yeah I noticed it to. Thought it was my Android wear watch so I turned off gestures thinking the wrist movements were switching the output. I haven't had a chance to retest.
Sent from my Pixel XL using Tapatalk
I am going to resurrect this thread because I'm having the same issue and it's one of the most infuriating things ever. To have my private conversation suddenly switch to speakerphone, or to be in the car and have it switch from car speakers to speakerphone is frustrating beyond words!
I have the issue as well. Sometimes it happens when another calls comes in or when a notification comes in, but also happens randomly. Pixel 2, Android 9.
Back from the dead
Odd bug, any mention of it on the bug tracker?
Can anyone assist me as I'm not very technical when it comes to phones but on my Moto G5 when the proximity sensor on the front panel is not covered I can hear all notification sounds eg:- Calls,E-Mails,Text Msg etc. But if I cover the sensor the volume decreases by approximately 95% this happens when the phone is in my pocket and I can't hear it ring?? I have proved this by calling the phone from my landline and covering the sensor with my finger,when covered the sound is hardly heard but if I don't cover it the sound is at full volume,any suggestions or ideas how I can get this problem sorted????Many Thanks,Seth. Just a short update on this problem I have done a FACTORY RESET on the phone as advised and this still occurs.When I go into SAFE MODE I do not get any sound from the phone at all.To test this I sent an E-Mail from my laptop and it was received on the phone with no sound only an E-Mail Icon,the same happens with an incoming call no sound but a Phone Icon to indicate I have received a call????Any suggestions???? Hi there just an update I have had a brand new replacement phone and transferred my Sim's and Sd Card to the new phone powered it up and I STILL have the same problem???When the display is covered the sound is cut by approx 95% but if the display is NOT covered then the phone volume is at full??? The Apps I have installed are 1 Truecaller, 2 Zedge Ringtones, 3 BBC Weather, 4 My Vodafone, 5 Google Keep and 6 MIPC can anyone help?????
This is a problem I've had on and off for a while, maybe since Wear 2.0 but can't be sure
More often than not, the alarms I set on the watch vibrate but no sound.
If it's relevant I have Watchmake installed and usually have one of WM faces showing
Also, I don't really use it for connections or notifications from my phone, so Areoplane mode is usually on for the watch and the watch is disconnected in Wear OS on my phone. Also, I tend to switch off the screen to save battery, but alarms do work in this scenario and when they work, I get vibration, display comes on and sound. When they don't work properly, I just get vibration, no sound and no display.
As I say, I had it working most of the time for about a year but recently its gone belly up again and I only get vibration for alarms. I've done factory resets on the watch and sometimes I get sound etc, sometimes I don't.
Anyone else experiencing this and/or any suggestions?
Thanks
Hi,
i have a problem with my huawei watch 1 about notification. After i went from p9 lite to p20lite the watch started notify me with a double and loud vibration. Before, with the old phone, it was just a single vibration and not so loud. From settings on watch i can switch between single, double or long vibration but the watch just always vibrate twice. i tried with the app feel the wear too but no luck.
Am i missing something?
Thank you