Hello,
I am trying to install android P beta and I am stuck at splash screen after following the instructions here: https://forum.xda-developers.com/showpost.php?p=77078240&postcount=14
I think that I might have the official treble even though I've installed mooke rom after the OOS CE.
Can it be the problem in this case? If so, how do I uninstall in order to flash mokee's treble?
Related
Can I flash treble gsi in mediatek devices ?
I have mt6739 chipset with android 8.1 and treble is enable by manufacturer default
Sorry for my bad English
If you have separate vendor and system partitions you can try it.
Just be sure to take backup before that.
General rule of thumb:
Find how to install custom recovery for your device (like Twrp)
and then proceed full backup from it and install the GSI custom image to system and probably some custom kernel.
Be sure to not wipe your recovery or atleast install it before reboot to be sure you always can go back and restore your backup.
Thanks bro
I have installed twrp by hovatek auto mtk twrp porter tool
But I have doubt that is it support treble or not
Also what is treble recovery ?
I have flashed resurrection remix it work freaking awesome
Bugs:
1.No volte as gsi not support volte
2.Hotspot not start
2.Magisk not working
Beside this rom is working very smooth
chandan2000 said:
I have installed twrp by hovatek auto mtk twrp porter tool
But I have doubt that is it support treble or not
Also what is treble recovery ?
Click to expand...
Click to collapse
Treble recovery have support for /vendor partition
I have mediatek 6739 device with me I have flashed many gsi like Cr droid havoc os lineage os ect before a year but as of now I want to flash Cr droid on my device I could not flash any gsi it shows flashing completed but doesn't boot into system. Any idea
My device is yu ace 5014
Android version 8.1
Which android version is possible to flash gsi
Ganeshtechy said:
I have mediatek 6739 device with me I have flashed many gsi like Cr droid havoc os lineage os ect before a year but as of now I want to flash Cr droid on my device I could not flash any gsi it shows flashing completed but doesn't boot into system. Any idea
My device is yu ace 5014
Android version 8.1
Which android version is possible to flash gsi
Click to expand...
Click to collapse
Hi,
cause of this Device is not highly frequent on our Planet. There are no custom Rom direct for this Phone. If you want to try a GSI Rom. You need to please consider that the GSI Roms need Drivers to for the integratet Hardware of the Phone. I dont think that a A11 GSI will really work. The Phone have Stock A8.1.0 and if you find GSI with A8.1.0 that will stable work...you are lucky guy...a GSI A9.0 with minimal bugs...you will be more then just lucky i think. But up to A10 or A11 will not practical work for sure but hey check out by trying
solong
speedson
speedson said:
Hi,
cause of this Device is not highly frequent on our Planet. There are no custom Rom direct for this Phone. If you want to try a GSI Rom. You need to please consider that the GSI Roms need Drivers to for the integratet Hardware of the Phone. I dont think that a A11 GSI will really work. The Phone have Stock A8.1.0 and if you find GSI with A8.1.0 that will stable work...you are lucky guy...a GSI A9.0 with minimal bugs...you will be more then just lucky i think. But up to A10 or A11 will not practical work for sure but hey check out by trying
solong
speedson
Click to expand...
Click to collapse
Android 10 is working but no volte I use JIO so volte is needed can I know where volte modem files are placed in ROMs !
can someone help I have unisoc t310 and i flashed gsi lineage 17.1 on a android 11 tablet but it wont boot lineage it just goes to bootloader, i made sure that vendor_oem was untouched and the rest was erased to make room for lineage
I'm looking for ROM with Android 9 pie for moto z2 play device I tried several methods by GSI I tried the KVT and tried all but no ROMs like Lineage OS and mokee OS, resurrection remix OS and other ROMs work fine but the method by GSI gave fail and all say that date is corrupted wanted to know if it has any ROM available with Android 9 need help installing a GSI on the device someone from the forum can help me.
first of all, you already have bootloader unlocked, from there on out it's simple, just have TWRP recovery, make wipes, then install rom android 8.1 with treble support, after this install img of rom android nine GSI you can try havoc 2.0 and ready, if something comes out more nothing but indicate us in which part you are staying to know how to help you..!!
I did all the processes for an image of GSI system through the ceiling I installed a ROM treble but when r6 to start the device it does not start and I tried to use the base KVT but the device starts giving error in the data system that says to be corrupted or encrypted but it's not
does anyone have any ROM with Android 9.0 running that can pass the rom link or some more effective method to install Android 9.0 on the device
Why did you create so may threads asking for the same thing?
I've found a way to flash new Android Q beta 3 GSI on any phone that support project treble officially or unofficially and after doing all the steps the phone didn't boot into OS it was just keeps rebooting into bootloader does any one know what is the problem or how to solve it ?
Android Q thread : https://forum.xda-developers.com/pr...ment/rom-android-p-developer-preview-t3816659
Android Q GSIs download link : https://mirrors.lolinet.com/firmware/gsi/
basem bebarse said:
I've found a way to flash new Android Q beta 3 GSI on any phone that support project treble officially or unofficially and after doing all the steps the phone didn't boot into OS it was just keeps rebooting into bootloader does any one know what is the problem or how to solve it ?
Android Q thread : https://forum.xda-developers.com/pr...ment/rom-android-p-developer-preview-t3816659
Android Q GSIs download link : https://mirrors.lolinet.com/firmware/gsi/
Click to expand...
Click to collapse
which base rom did you flash
Sonisudhanshu said:
which base rom did you flash
Click to expand...
Click to collapse
The Treble Lineage OS 15.1 ROM
Which of these GSI's work in cedric? And how does the installation?
BatatinhaDoce said:
Which of these GSI's work in cedric? And how does the installation?
Click to expand...
Click to collapse
Generic A-only
installation for A-Only :
Install img into system partition
Flash permissiver_v2.zip or make your boot partition selinux permissive
Flash FixZygote.zip
Reboot
basem bebarse said:
The Treble Lineage OS 15.1 ROM
Click to expand...
Click to collapse
I think this will require treble lineage os 16.0
Try asking codezero but with patience
Sonisudhanshu said:
I think this will require treble lineage os 16.0
Try asking codezero but with patience
Click to expand...
Click to collapse
I think you're right but in Android Q original thread he said
Requirements :
Treblized device with 8.1 or P vendor
So i think treble Lineage OS 15.1 should be working to
basem bebarse said:
I've found a way to flash new Android Q beta 3 GSI on any phone that support project treble officially or unofficially and after doing all the steps the phone didn't boot into OS it was just keeps rebooting into bootloader does any one know what is the problem or how to solve it ?
Android Q thread : https://forum.xda-developers.com/pr...ment/rom-android-p-developer-preview-t3816659
Android Q GSIs download link : https://mirrors.lolinet.com/firmware/gsi/
Click to expand...
Click to collapse
Google said only devices that support treble officially can install Android Q. Project Treble with a Q-compatible vendor isn't here yet for cedric. Nor is the current Oreo vendor suited for flashing the Q GSI
As we all or some know we are able to make our devices treble supported. Also google realeased android q gsi beta 2.
I tried to install in different ways but was unable to reach my goal (This is my first try installing gsi rom).
Can anyone recommend anything? Or is it possible to install it?
Hi all,
i need your support.
I did not manage to install Android GSI / Treble (lineage-18.1-treble_arm64_a) to the:
Umidigi_A3_Pro_N
with
Android 8.1:
and current Software Version:
UMIDIGI_A3_Pro_N_V1.4_20190416
from here: https://community.umidigi.com/forum.php?mod=viewthread&tid=18713
I tried this version:
lineage-18.1-20211214-UNOFFICIAL-treble_arm64_avS.img.xz
from:
https://sourceforge.net/projects/andyyan-gsi/files/lineage-18.x/lineage-18.1-20211214-UNOFFICIAL-treble_arm64_avS.img.xz/download
without sucess, the device does not boot after flashing the .img file within CWRP (Team Win Recovery Project 3.3.1.0 repack Cleopatra81
treble_arm64_a should be the right image, or am i wrong, my Treble Info Check App said so, see attached screenshots?
I also asked for Support in the Smartphone thread, but maybe someone has here some ideas to fix it?
Umidigi A3 Pro - TWRP & Stock Rom
Reserved exclusively for the stock rom V1.0_20181122 Download the stock rom V1.0_20181122 at the following link : https://mega.nz/#!yxkUVA4I!0exovcsKTXb75YIBZfrqDC6Ak01wsv_Bp3Nl5mGQ7o8 Download the TWRP at the following link ...
forum.xda-developers.com