So one morning I woke up and saw phone keeps rebooting(bootloop).I had breakfast then came back to pick it up,and i connected it to charger and phone was totaly dead.I tryed other cables but still same result.Only way to power it on is when I use original cable and connect it to charger/pc.Then red led turns on and display showing low battery,and led keeps blinking.Sometimes it can boot into system and works for few minutes and shuts off cuz 0%.I changed battery but everything is same,I also can go into TWRP.
**I TRIED EDL MODE/two pins or whatever and my PC is not showing Qualcom driver or anything else in relation with phone.
It might be the usb socket Problem....
Alfario said:
It might be the usb socket Problem....
Click to expand...
Click to collapse
I changed battery and usb port,but still having same problem
did you notice this is the Mi 5S forums, not the Mi 5 forums? maybe you'll have better luck asking in the Mi 5 (no S) forums.
unless, of course, you made a typo in the title.
NightRaven49 said:
did you notice this is the Mi 5S forums, not the Mi 5 forums? maybe you'll have better luck asking in the Mi 5 (no S) forums.
unless, of course, you made a typo in the title.
Click to expand...
Click to collapse
Oh,you're right,my bad.
Related
Hi
I have a RedMi 1S running V45 (Indian Version). I am using this mobile since last 1 month. I am facing a strage issue with the phone.
Whenever the battery drains completely and the phone get switched off, it is taking forever to switch on the phone even after charging. I atleast need to charge it for 1 or 2 hours to see something on the screen. Its like the phone is completely dead.
I tried taking of the battery and inserted it and then charged. At this stage only thing I notice is the status LED glows in RED for a couple of seconds and like dead. After one or 2 hours, I see that LED starts blinking in RED. After this I need to wait for another 30 min or 1 hour to be able to switch on the phone. It is like the phone is taking almost 2 hours to get the initial charge to switch on the phone.
Is anyone facing same kind of issue?
Thanks
No mine is fine..
It only takes about 10-15s normally to gain initial charge to boot up !
Maybe some issue with charging?
No such issue faced yet. Once mine got fully discharged , but started in few seconds of charging.
Issue with the Charger
Hi
Looks like issue/compatibility with the Charger. I was using Samsung 2.5A charger which I bought for old mobile. Today, I tested with the original MI charger and the phone immediately showing the charging status. The MI original charger is 2A one. But still I think it has some compatibility issue with other chargers.
Thanks for your replies.
Dont!!!
@mail2eswar Please Dont use any other charger except xiaomi charger!! Its Snapdragon 400 8228 and it actually supports Qualcomm Quick charge 2.0 but its not working (donno bcaz of kernel or its locked) So if u use any other charger u'll end up in SoC failures :silly: and leads Motherboard replacement!!!! :cyclops:
Pavan l said:
@mail2eswar Please Dont use any other charger except xiaomi charger!! Its Snapdragon 400 8228 and it actually supports Qualcomm Quick charge 2.0 but its not working (donno bcaz of kernel or its locked) So if u use any other charger u'll end up in SoC failures :silly: and leads Motherboard replacement!!!! :cyclops:
Click to expand...
Click to collapse
Thank you. I just started using the Original Mi charger today. I will continue using the same.
i'm newbie ! ( sorry for bad english )
I'm new here. i did everything in this thread and i don't think the battery works for me . how many percent battery drained over 1 hour ?
and universal initd said that my kernel does not support init.d . had anyone encountered this ?
mail2eswar said:
Hi
Looks like issue/compatibility with the Charger. I was using Samsung 2.5A charger which I bought for old mobile. Today, I tested with the original MI charger and the phone immediately showing the charging status. The MI original charger is 2A one. But still I think it has some compatibility issue with other chargers.
Thanks for your replies.
Click to expand...
Click to collapse
Don't ever use another's phone as your Charger. Different V and A are the main cause of your issue.
mail2eswar said:
Hi
I have a RedMi 1S running V45 (Indian Version). I am using this mobile since last 1 month. I am facing a strage issue with the phone.
Whenever the battery drains completely and the phone get switched off, it is taking forever to switch on the phone even after charging. I atleast need to charge it for 1 or 2 hours to see something on the screen. Its like the phone is completely dead.
I tried taking of the battery and inserted it and then charged. At this stage only thing I notice is the status LED glows in RED for a couple of seconds and like dead. After one or 2 hours, I see that LED starts blinking in RED. After this I need to wait for another 30 min or 1 hour to be able to switch on the phone. It is like the phone is taking almost 2 hours to get the initial charge to switch on the phone.
Is anyone facing same kind of issue?
Thanks
Click to expand...
Click to collapse
Did you get any solution for this issue I'm facing the same the same problem. I'm unable to restart my redmi 1s
Eaxct same problem on my Redmi 1S
Exactly the same issue with mu Redmi 1S. Initially everything was fine. Then one day I lost my original Charger (1 Amp) , and I started looking for a replacement charger. I got one 2 Amp Fast charger from a local store and initially everything was fine and the Phone used to charge fine but then it wont hold the charge for too long. So I started using my Redmi Note4 charger which again is a 2 Amp charger.
But as I see is that if my phone is once drained fully, it is not easy to start back. 2 Amp charger connected for 3 hours straight did'nt help, apart from the intermittent flicker of the LED once a while. No battery charging animation on the screen.
Then I took 1.2 Amp Nexus Charger and behold the full screen battery charging animation pops up immediately. I could start my phone while charging.
My inference is that get an original Xiaomi Redmi 1S (1 Amp) charger if you can. Or else suffer like me
i have the same problem . did you fix it
exactly same problem here. Difference is that I'm using Redmi 1s for more than 3 yrs and suddenly out of nowhere these happened ( after battery discharged its not starting and a red led is blinking, even removing battery and connecting to the charger didn't work). Someone mentioned here not to use different charger, probably they r right bcz I used samsung charger while this happened. Went to Mi Authorized Servicing Centre they told Motherboard is damaged and will cost Rs. 4800/-. No way man! my Mi was of 5999/- not gonna fix it with 4800/-. I'll rather go for a new one.
can i solve this problem by changing another os
Yes You are right. Today after complete battery drain, I have connected phone to another charger that time LED on mobile start blinking so I assume that it started charging while it was not. After another one hr I tried to switched on but it was not switching on so I was worried and I started searching solution, Strangly when I connected Orignal Charger , it immediately shows battery symbol which was showing 0% charge. Thanks to this thread which help me to find solution.
I have a Zenfone 2 551, 2GB/16GB. Bought it 45 days ago. I bought an Asus Fast Charger later on. The first time I wanted to use the new fast charger the phone turned off.
I change to a regular charger and the led turned on (I had 40% battery at the time). Left the phone charging (standard original Asus Charger) and the battery instead of charging is loosing charge. Even with the led turned on.
Eventually the battery died. I tried other chargers. 1 out 10, maybe a got the led back on, but the battery stayed on 0% and wasn't enough to even turn on the phone
I've read several people having this same issue.
http://forum.xda-developers.com/zenfone2/help/zenfone-2-charging-dead-t3149072
https://www.reddit.com/r/zenfone2/comments/3em550/zenfone_2_not_powering_on_or_showing_charging/
http://forums.androidcentral.com/asus-zenfone-2/552432-phone-not-charging.html
In one of the post someone wrote this tip
Thanks for the reply. But after a long day of stressing, it worked by itself. I read from an article about another android with quick charging that the USB could have not been all the way in in the adapter which, in my opinion, it was but regardless I repeatedly unplug and plug(15 mins -30 mins interval)... did the same with the phone plug and unplug till I saw the battery level going up
It didn't worked for me!
I've already tried:
a. Changing chargers and cables
b. Pressing power for 20 seconds
c. Pressing volume up + power
d. Plugging and unplugging the phone every 15 minutes
I bought the phone while visiting the US (I don't live there).
Has anyone else had this kind of problem, and was able to fix it?
Thanks
Can you confirm if the ASUS adapters/USB cables work with other USB devices? Have you tried charging from a PC? If so, unfortunately this issue sounds like a hardware related issue and will require sending on for warranty service. Please feel free to contact me direct at [email protected] if you have any questions or concerns.
Sincerely,
ASUS_USA
my phone died yesterday like that. i connect my phone to my computer with Asus usb cable the one comes with phone. my phone screen cracked about 1 month ago but it was not disturbing me so i didn't repaired it. right now nothing works on the phone.. at the moment i connect my phone it turned off and for 1 sec battery screen appaired then nothing. can't see my phone when i connect to pc with adb or something like that too so i think problem is more then screen but any idea ? @Asus_USA @Asus
My Zen2 once died when i charged it in my pc. I just unscrewed the back , remove the battery and put it again., then it vibrates and works again.
rixz59 said:
My Zen2 once died when i charged it in my pc. I just unscrewed the back , remove the battery and put it again., then it vibrates and works again.
Click to expand...
Click to collapse
Thanks so much bro. , de attached battery and then attached again it vibrated 2 times and works perfectly
how do u detach the battery
kaaninel said:
Thanks so much bro. , de attached battery and then attached again it vibrated 2 times and works perfectly
Click to expand...
Click to collapse
please tell how you detach the battery.....would be of immense help.
regards
Rajesh
rajhydro said:
please tell how you detach the battery.....would be of immense help.
regards
Rajesh
Click to expand...
Click to collapse
Open your phone case...
Sent from my GT-I9500
detach the battery
krasCGQ said:
Open your phone case...
Sent from my GT-I9500
Click to expand...
Click to collapse
dude its not so funny.....
rajhydro said:
please tell how you detach the battery.....would be of immense help.
regards
Rajesh
Click to expand...
Click to collapse
Here is a short video that'll probably help.
https://www.youtube.com/watch?v=f84b-Zmu2D4
syn3h said:
Here is a short video that'll probably help.
https://www.youtube.com/watch?v=f84b-Zmu2D4
Click to expand...
Click to collapse
The guy uses a metal tip pin to release the battery connector? seems that is risky and may short something out. These asus phones have so many issues, that's for sure.
Chocketbear said:
The guy uses a metal tip pin to release the battery connector? seems that is risky and may short something out. These asus phones have so many issues, that's for sure.
Click to expand...
Click to collapse
I guess you could try a plastic one
Hello!
Yesterday my note 2 froze during youtube video playback but sound kept on going. I held down power button key for approximately 10 seconds until it powered down. I've tried to power it up again but it did not. I've connected it to the charger and nothing happens, not even red light lights up to show that it is charging. I've tried to boot it into download mode but nothing happens. I am running TWRP, agni kernel and eclipse rom. Is there something I can do ? Thanks in advance.
Can you boot into TWRP?
lhanx said:
Can you boot into TWRP?
Click to expand...
Click to collapse
Hey thanks for the reply.
Sadly, no , I cannot. I cannnot even turn on device. Samsung logo does not even appear and when I connect it to the charger red LED does not work. Would usb jig help me?
Your battery could be dead, or better your charger. Try using your friend's charger.
Option58 said:
Your battery could be dead, or better your charger. Try using your friend's charger.
Click to expand...
Click to collapse
Hey! Thanks for the reply. I' ve tried different charger and battery. Still no sign of life. I guess that's it. Phone is dead.
it happened to me in exactly same way I was scrolling through facebook and it froze, I remember about three years ago there was a service called j-tag in uk and they were fixing this but they don't do it anymore for note 2, is there anyone on this forum who knows where this can be done ?
Hello guys, and sorry for my bad engish. I really need your help! Thanks in advance.
So recently i bought second hand Huawei watch w1 which didint work. The watch can't be turned on, it shows the baterry and lighting icon (no X) when being charged(also gets really hot) , but the second i unplug it dies. I occasionally can go in fastboot mode (when charged) (dont get hot), installed the adb drivers, but the watch cant be recognized by windows 7, or 10 or xp or mac, no matter what i do, i think the problem is that the watch came with Non oem charging dock, but im not sure.
My plan is to go into fastboot mode and run adb and from there to reflash the firmware. But when i plug it gives me usb error 43.
So my questions are: Is the baterry dead, because it dies when i unplug it or is it bricked and this is normal when its bricked. Or it is because of the charging dock?
I've tried numerous of ways to get this fixed but i've hitted in a wall.
Things i tried from theese threads didnt help me: https://forum.xda-developers.com/huawei-watch/general/tutorial-complete-guide-how-to-flash-t3307137
https://forum.xda-developers.com/huawei-watch/help/recovery-bootloop-t3266408
https://plus.google.com/+MiguelPais/posts/8L3pzvWWTE4
https://forum.xda-developers.com/hu...p-twrp-2-8-7-0-recovery-huawei-watch-t3224714
Any help is apreciated .
SvilenK said:
Hello guys, and sorry for my bad engish. I really need your help! Thanks in advance.
So recently i bought second hand Huawei watch w1 which didint work. The watch can't be turned on, it shows the baterry and lighting icon (no X) when being charged(also gets really hot) , but the second i unplug it dies. I occasionally can go in fastboot mode (when charged) (dont get hot), installed the adb drivers, but the watch cant be recognized by windows 7, or 10 or xp or mac, no matter what i do, i think the problem is that the watch came with Non oem charging dock, but im not sure.
My plan is to go into fastboot mode and run adb and from there to reflash the firmware. But when i plug it gives me usb error 43.
So my questions are: Is the baterry dead, because it dies when i unplug it or is it bricked and this is normal when its bricked. Or it is because of the charging dock?
I've tried numerous of ways to get this fixed but i've hitted in a wall.
Things i tried from theese threads didnt help me: https://forum.xda-developers.com/huawei-watch/general/tutorial-complete-guide-how-to-flash-t3307137
https://forum.xda-developers.com/huawei-watch/help/recovery-bootloop-t3266408
https://plus.google.com/+MiguelPais/posts/8L3pzvWWTE4
https://forum.xda-developers.com/hu...p-twrp-2-8-7-0-recovery-huawei-watch-t3224714
Any help is apreciated .
Click to expand...
Click to collapse
Definitely sounds like a hardware problem. Maybe the battery is dead, maybe the non-OEM charger isn't wired correctly and it fried the motherboard. It could be a lot of things, but I don't think reflashing the firmware will help you.
I had similar problems with a Moto 360 when I tried to plug it into a cable that I made myself. I had some wires crossed and the motherboard was fried. After that, no screen except when attached to the charger.
TheSt33v said:
Definitely sounds like a hardware problem. Maybe the battery is dead, maybe the non-OEM charger isn't wired correctly and it fried the motherboard. It could be a lot of things, but I don't think reflashing the firmware will help you.
I had similar problems with a Moto 360 when I tried to plug it into a cable that I made myself. I had some wires crossed and the motherboard was fried. After that, no screen except when attached to the charger.
Click to expand...
Click to collapse
Thank you for your answer.
I opened the watch and it didnt smell like burnt or anything visible, but who knows.
I think there may be structural issue with the HW1 and charging anyway. The one contact point on the back of the watch is burned/melted and has a hole now. Just ordered replacement case+back to solve it.
OnnoJ said:
I think there may be structural issue with the HW1 and charging anyway. The one contact point on the back of the watch is burned/melted and has a hole now. Just ordered replacement case+back to solve it.
Click to expand...
Click to collapse
interesting, thank you!
My device showing no signs of charging like notification light on or charge symbol in battery icon or charge sound while usb inserted but it still charging as usual but a bit slow any solution for this problem
Thanks in advance
watson185 said:
My device showing no signs of charging like notification light on or charge symbol in battery icon or charge sound while usb inserted but it still charging as usual but a bit slow any solution for this problem
Thanks in advance
Click to expand...
Click to collapse
try another data cable, and tell if you see any difference.
Sent from my Redmi Note 5 Pro using Tapatalk
EMONESSboy said:
try another data cable, and tell if you see any difference.
Sent from my Redmi Note 5 Pro using Tapatalk
Click to expand...
Click to collapse
I tried it but it does not work after a day my device not charging went completely dead and does not power on and service center people said me to replace it mother board worth of 8k which is very disgusting
watson185 said:
I tried it but it does not work after a day my device not charging went completely dead and does not power on and service center people said me to replace it mother board worth of 8k which is very disgusting
Click to expand...
Click to collapse
U can replace bottom USB board first to test if the connection is dead. It's like 3$ from AliExpress.