Related
Hi I was on Pixel Experience ROM then I flashed MIUI 9.5.17 via Recovery TWRP 3.2.2.0 with clean flash (i.e. dalvik cache, data, system and internal storage wiped)
but Now mobile is dead its not even turning on. What should I do please help
Flash lazyflasher.
I think this thread provide a compatible version.
https://forum.xda-developers.com/an...zip-lazyflasher-tool-flashing-custom-t3549210
Or from here: -
https://forum.xda-developers.com/showpost.php?p=76904750&postcount=146
Device Manager is showing this
1
corkiejp said:
Flash lazyflasher.
I think this thread provide a compatible version.
https://forum.xda-developers.com/an...zip-lazyflasher-tool-flashing-custom-t3549210
Or from here: -
https://forum.xda-developers.com/showpost.php?p=76904750&postcount=146
Click to expand...
Click to collapse
Qualcomm HS-USB QDLoader 9008 (COM3)
follow this guide:
https://forum.xda-developers.com/redmi-note-5-pro/how-to/guide-redmi-note-5-pro-unbrick-t3816178
huttui said:
Hi I was on Pixel Experience ROM then I flashed MIUI 9.5.17 via Recovery TWRP 3.2.2.0 with clean flash (i.e. dalvik cache, data, system and internal storage wiped)
but Now mobile is dead its not even turning on. What should I do please help
Click to expand...
Click to collapse
huttui said:
1
Qualcomm HS-USB QDLoader 9008 (COM3)
Click to expand...
Click to collapse
mmhuseyni said:
follow this guide:
https://forum.xda-developers.com/redmi-note-5-pro/how-to/guide-redmi-note-5-pro-unbrick-t3816178
Click to expand...
Click to collapse
He flashed a safe MIUI version, so should have not triggered ARP!
Solution needed
corkiejp said:
He flashed a safe MIUI version, so should have not triggered ARP!
Click to expand...
Click to collapse
Please provide solution asap
huttui said:
1
Qualcomm HS-USB QDLoader 9008 (COM3)
Click to expand...
Click to collapse
I think you are in edl mode right now. You can try to flash the 9.5.17 ROM (use the fastboot ROM, not recovery ROM) with MiFlash tool.
edit: If you are not in edl mode, try to enter fastboot and put this code "fastboot oem edl" to enter edl mode.
Tried it
finsx said:
I think you are in edl mode right now. You can try to flash the 9.5.17 ROM (use the fastboot ROM, not recovery ROM) with MiFlash tool.
edit: If you are not in edl mode, try to enter fastboot and put this code "fastboot oem edl" to enter edl mode.
Click to expand...
Click to collapse
Everytime I flash With MIFLASH Tool i end up with this
I have tried this methods on fastboot rom version 9.5.17, 9.5.14 and global beta 8.7.12
but nothing works results are same
huttui said:
Everytime I flash With MIFLASH Tool i end up with this
I have tried this methods on fastboot rom version 9.5.17, 9.5.14 and global beta 8.7.12
but nothing works results are same
Click to expand...
Click to collapse
Never faced something like that so i looked at google and found some solutions.
1. Try to use test point, flash the ROM.
2. Unplug the battery and charge it with wall charger to get some juices, then plug it again, enter edl, then flash the ROM.
3. Just unplug the battery, enter edl mode, flash the ROM.
4. The worst solution and also the last, take it to the service center, hope they could help you fix your device.
I still have to wait 10 days to unlock bootloader, so i have not tried to enter edl mode with this Whyred yet. Don't know if the edl mode even works in Whyred.
edit:
5. Try to use beta version of MiFlash, because i have tried to unlock bootloader before, the newest version cannot detect my phone, so i used the old one.
6. Use the 64 bit version of windows.
huttui said:
Hi I was on Pixel Experience ROM then I flashed MIUI 9.5.17 via Recovery TWRP 3.2.2.0 with clean flash (i.e. dalvik cache, data, system and internal storage wiped)
but Now mobile is dead its not even turning on. What should I do please help
Click to expand...
Click to collapse
Hii...bro am in exact same situation right now. Did u solve it? Did u find any method to do?
What version of miui you had installed before pixel?
have you flashed any beta versions after 8.7.5 like 8.7.12, 8.7.26, 8.8.2 etc? If yes, then your device has triggered anti rollback and can only be resurrected using authorized mi account or change of motherboard.
EDL mode is disabled in whyred through fastboot command. You'll have to proceed with test point method to enable edl (I've seen in many threads which points to only test point method for edl) and then flash the rom which was there before you flashed PE.
Or, you should take help from service center.
If you can remember ARB3 before PE, then 9.5.17 will work but if you are not sure (like miui used to download the 9.5.19 rom automatically in wifi and a single reboot will upgrade you to ARB4 without your consent and then you wouldn't know it before it's too late and to avoid that, revoking updater authorization in the settings would be the only way to disable downloading ota in wifi ) , then you should flash 9.5.19 otherwise downgrade arb will brick your phone. Also, it s not clear whether you have bricked it while flashing 9.5.17 after PE which was a common reason when people downgraded from 9.5.19 to 9.5.17.
animeshsahood6 said:
Hii...bro am in exact same situation right now. Did u solve it? Did u find any method to do?
Click to expand...
Click to collapse
You have bricked your device by downgrading from arb4 to arb3. go to mi service center to get your mother board replaced as soon as possible..
epicwarlock said:
You have bricked your device by downgrading from arb4 to arb3. go to mi service center to get your mother board replaced as soon as possible..
Click to expand...
Click to collapse
Its covered under warranty r8?
animeshsahood6 said:
Its covered under warranty r8?
Click to expand...
Click to collapse
If you go to xiaomi authorised service centre then it is covered under warranty..
Lucky
animeshsahood6 said:
Hii...bro am in exact same situation right now. Did u solve it? Did u find any method to do?
Click to expand...
Click to collapse
Luckily for me mi service centre replaced the board for free as it was in warranty. try your luck. i told them it stuck during miui10 update.
Hi,
I just tried to root my Mi Max 3 but got bootloop, what can I do?
I unlocked the device.
Then I flashed TWRP 3.2.0. nitrogen, devcie was encrypted then.
I flashed Magisk 18.1., rebooted, but bootloop.
I rebooted into TWRP again and flashed no-verity-opt-encrypt-6.0.zip and again Magisk 18.1 and rebooted, but bootloop only.
I did factory reset but bootloop only.
What am I suposed to do? Any help from you guys?
Thanks you very much !
download and install the latest twrp from nijel8. Make a wipe and install only a clean rom and magisk. Nothing more. It must work.
Tried magisk 18.0?
I use magisk 18.0 and official twrp 3.2.3.0.
Hi,
it didnt help unfortunately.
I think I first need to flash a stock firmware completely right? Then try another round with the suggested versions by you guys.
I downloaded stock ROM from Xiao Mi Website here: http://en.miui.com/a-234.html
It is named: nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218.0000.00_8.1_global
But when I try to flash it via fastboot mode and the help of Xiao Mi Flash Tool I get an error like this (attachment)
Any help?
Update: I just flashed official full rom named: miui_MIMAX3Global_V10.2.1.0.OEDMIFK_885d8903d6_8.1.zip via TWRP and it didnt show any errors (but TWRP still installed, I expected stock revoery actually?!). I wiped cache and rebooted but still bootloop.
I am really not sure what to do now.
Update 2: I now was able to flash stock rom (nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218.0000.00_8.1_global) via fastboot mode (error like on screenshot didnt appear anymore, dont really know why) now phone is only booting into stock MIUI recovery and shows a red noteification: "This MIUI Version cant be installed on this device" -> Can anybode give me help please?
Update 3: Tried to unlock again but it fails due to my device is not bound to my MI Account, but how to add it to account as I cant boot it up anymore and go to the settings in android. Or do I need another FULL Rom? I read smth that this error (Rom cant be installed on this device) appears if one is trying to flash Global Rom instead of China ROM? Where to get this one? Dont know the difference actually But my phone had google services preinstalled
I now even downloaded the chinese full rom: Mi Max 3 China Stable ROM 10.0.6.0 – V10.0.6.0.OEDCNFH / MIUI 9 / fastboot / Android Oreo because I think maybe this was originally i nstalled (purchased phone in Indonesia which is black market)
but once I try to flash it, the mix flash tool tells me now erase is not allowed in locked mode. I need to unlock first? but how? Unlock bootloader is not possible due to device is not bound with my mi-account.
I am really lost know
current situation:
not able to flash china full rom because locked
not able to unlock because device not bound to mi-account
I amonly able to bootup into mi-stock reciovery and stock bootloader.
what can I do?
tobyffm said:
I am really lost know
current situation:
not able to flash china full rom because locked
not able to unlock because device not bound to mi-account
I amonly able to bootup into mi-stock reciovery and stock bootloader.
what can I do?
Click to expand...
Click to collapse
What base it has, china or global when you get it?
tobyffm said:
I am really lost know
current situation:
not able to flash china full rom because locked
not able to unlock because device not bound to mi-account
I amonly able to bootup into mi-stock reciovery and stock bootloader.
what can I do?
Click to expand...
Click to collapse
Can't you flash from stock recovery? Download recovery rom matching your stock recovery(china or global), save in microsd. Enter recovery and flash rom.
Edit: sorry, just checked. Not possible to select file from stock mi recovery.
Lecterr said:
What base it has, china or global when you get it?
Click to expand...
Click to collapse
I dont really know. AT least all google services were available. does this mean it has been the global base? I bought this phone in Indonesia were it is not available officially, only through some black market sellers in the malls. Maybe they also have used the chinese versions, unlocked and reflashed the global versions and then they sell it. So maybe it has been the chinese base originally but is sold out with the global version? On the devices backside is a sticker with IMEi, IMEI2, MEID and SN, does this say anything about the version?
bobo9900 said:
Can't you flash from stock recovery? Download recovery rom matching your stock recovery(china or global), save in microsd. Enter recovery and flash rom.
Click to expand...
Click to collapse
I think not, in Stock Recovery which is now installed on the phone I only have Reboot, Wipe Data and Connect MIAssistant
How about this?
https://forum.xda-developers.com/redmi-note-5-pro/how-to/tut-flashing-official-recovery-rom-t3798165
Same chipset as mi max3..
bobo9900 said:
How about this?
https://forum.xda-developers.com/redmi-note-5-pro/how-to/tut-flashing-official-recovery-rom-t3798165
Same chipset as mi max3..
Click to expand...
Click to collapse
thanks a lot for this tip, bro. I am not sure because in this guide they say it will help you to flash a recovery? I am having stock recovery already installed. I need to reflash the correct Rom. Anyway, I will try it asap. Atm it fails due to bad internet connection in my hotel right now.
I will download following ROM: Chinese Stable: MIUI 10 V10.2.1.0.OEDCNXM as a .zip archive and will try to load it into the Mi Assistant tool and try to start flashing from there. OK? Will let you know about the result then.
tobyffm said:
thanks a lot for this tip, bro. I am not sure because in this guide they say it will help you to flash a recovery? I am having stock recovery already installed. I need to reflash the correct Rom. Anyway, I will try it asap. Atm it fails due to bad internet connection in my hotel right now.
I will download following ROM: Chinese Stable: MIUI 10 V10.2.1.0.OEDCNXM as a .zip archive and will try to load it into the Mi Assistant tool and try to start flashing from there. OK? Will let you know about the result then.
Click to expand...
Click to collapse
Its for flashing rom. Use the recovery rom, not fastboot rom. What it means is that your recovery should match the rom. (MiRecovery china, recovery rom china. MiRecovery global, recovery rom global)
I dont know which recovery version you successfully flashed to phone, but i guess its china. Won't able too boot if device is locked and recovery is not original to phone aka china recovery.
Edit:from that thread,someone successfully flashed miui10. If you failed to do so, DO NOT try to flash miui9. Different ARB, will permanently brick device.
bobo9900 said:
Its for flashing rom. Use the recovery rom, not fastboot rom. What it means is that your recovery should match the rom. (MiRecovery china, recovery rom china. MiRecovery global, recovery rom global)
I dont know which recovery version you successfully flashed to phone, but i guess its china. Won't able too boot if device is locked and recovery is not original to phone aka china recovery.
Edit:from that thread,someone successfully flashed miui10. If you failed to do so, DO NOT try to flash miui9. Different ARB, will permanently brick device.
Click to expand...
Click to collapse
bobo9900 said:
Its for flashing rom. Use the recovery rom, not fastboot rom. What it means is that your recovery should match the rom. (MiRecovery china, recovery rom china. MiRecovery global, recovery rom global)
I dont know which recovery version you successfully flashed to phone, but i guess its china. Won't able too boot if device is locked and recovery is not original to phone aka cina recovery.
Click to expand...
Click to collapse
My recovery is at least in english language, does this help?
I just tried to flash the CN rom package mentioned in my last post with this MiAssistant Beta 3.0, but package verification failed:
Does this mean it is the wrong rom package and I simply need to download the other versions and test it with other ones and once erfification works fine I will know this must be the correct one? Or is this just another error i am know running into?
Any idea?
Many tanks!
PS: Many thanks for your update: I only tried to load miui_MIMAX3_V10.2.1.0.OEDCNXM_4f84ff82ea_8.1.zip into that Mi Assistant but verification failed, didnt do anything else so far.
tobyffm said:
My recovery is at least in english language, does this help?
I just tried to flash the CN rom package mentioned in my last post with this MiAssistant Beta 3.0, but package verification failed:
Does this mean it is the wrong rom package and I simply need to download the other versions and test it with other ones and once erfification works fine I will know this must be the correct one? Or is this just another error i am know running into?
Any idea?
Many tanks!
PS: Many thanks for your update: I only tried to load miui_MIMAX3_V10.2.1.0.OEDCNXM_4f84ff82ea_8.1.zip into that Mi Assistant but verification failed, didnt do anything else so far.
Click to expand...
Click to collapse
I guess verification failed means not matching. You can try global rom. Btw, have you try wipe data. Maybe rom already flashed properly but data bug causes bootloop. Try wipe then reboot.
bobo9900 said:
I guess verification failed means not matching. You can try global rom. Btw, have you try wipe data. Maybe rom already flashed properly but data bug causes bootloop. Try wipe then reboot.
Click to expand...
Click to collapse
Yes, I also used this wipe feature in this Mi Assistant but unfortunately it did not help. After rebooting again bootup screen appears a bit longer and I can hear a short beep sound which let me think it will boot up properly but unfortunately it then restarts into recovery mode only.
well installed is this one: nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218.0000.00_8.1_global, which I flashed earlier today via mi flash tool.
Now I tried to flash miui_MIMAX3Global_V10.2.1.0.OEDMIFK_885d8903d6_8.1.zip which should be the same, but verification failed, too.
Does it make sense?!
In this thread, there are many Stock Roms available:
https://forum.xda-developers.com/mi-max-3/how-to/rom-official-recovery-fastboot-roms-mi-t3827503
Shall I download all MIUI 10 Stable (Global and China) and try?
tobyffm said:
Yes, I also used this wipe feature in this Mi Assistant but unfortunately it did not help. After rebooting again bootup screen appears a bit longer and I can hear a short beep sound which let me think it will boot up properly but unfortunately it then restarts into recovery mode only.
well installed is this one: nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218.0000.00_8.1_global, which I flashed earlier today via mi flash tool.
Now I tried to flash miui_MIMAX3Global_V10.2.1.0.OEDMIFK_885d8903d6_8.1.zip which should be the same, but verification failed, too.
Does it make sense?!
In this thread, there are many Stock Roms available:
https://forum.xda-developers.com/mi-max-3/how-to/rom-official-recovery-fastboot-roms-mi-t3827503
Shall I download all MIUI 10 Stable (Global and China) and try?
Click to expand...
Click to collapse
Global and china rom have their own signature. But different version always have same signature. If verification failed, I thought signature didn't match.
Now you have tried both global and china and still failed. I'm confused. I don't have any idea anymore..
bobo9900 said:
Global and china rom have their own signature. But different version always have same signature. If verification failed, I thought signature didn't match.
Now you have tried both global and china and still failed. I'm confused. I don't have any idea anymore..
Click to expand...
Click to collapse
Thanks anyway bobo9900 for assisting me. And I should not try to flash a MIUI 9 rom, yeah?
Argh, I really don't understand it. I just got this phone yesterday, unlocked and installed twrp and magisk by using a how.to especially for Mi Max 3 and ran into this issue, FU**. Why does this happen to me, I only did these simple steps. Phone for trash after 1 day already?
Anybody else there who can help me?
tobyffm said:
Thanks anyway bobo9900 for assisting me.
Argh, I really don't understand it. I just got this phone yesterday, unlocked and installed twrp and magisk by using a how.to especially for Mi Max 3 and ran into this issue, FU**. Why does this happen to me, I only did these simple steps. Phone for trash after 1 day already?
Anybody else there who can help me?
Click to expand...
Click to collapse
Confirm your version global or china, so other might able to help. Mine come locked with screen protector sticker in English without Chinese words. Box had 'global version' written in red sticker.
Semoga sukses bro..
bobo9900 said:
Confirm your version global or china, so other might able to help. Mine come locked with screen protector sticker in English without Chinese words. Box had 'global version' written in red sticker.
Semoga sukses bro..
Click to expand...
Click to collapse
well, now there is nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218. 0000.00_8.1_global installed on the phone.
Also the Mi Assistant tool recgnizes V10.2.1.0.OEDMIFK as currently installed. My box has pon backside some chinese signs, no teaser "Global version". I think it has been chinese but black market sellers flashed global roms already to fit the indonesian market.
But I just noticed that in this Mi Assistant tool I have the options "Flash" and "Quick FLash" (erase all data) and there they mention it will work with Miui 8 and 9. Seems this Assistant tool is not MIUI 10-ready?! And I couldnt find a newer version of this.
Maybe this is the reason why verification with MIUI 10 packages fails?
tobyffm said:
well, now there is nitrogen_global_images_V10.2.1.0.OEDMIFK_20181218. 0000.00_8.1_global installed on the phone.
Also the Mi Assistant tool recgnizes V10.2.1.0.OEDMIFK as currently installed. My box has pon backside some chinese signs, no teaser "Global version". I think it has been chinese but black market sellers flashed global roms already to fit the indonesian market.
But I just noticed that in this Mi Assistant tool I have the options "Flash" and "Quick FLash" (erase all data) and there they mention it will work with Miui 8 and 9. Seems this Assistant tool is not MIUI 10-ready?! And I couldnt find a newer version of this.
Maybe this is the reason why verification with MIUI 10 packages fails?
Click to expand...
Click to collapse
Read the last page, someone manage to re flash 10.0.2.0.
If you wanna flash old version, check ARB level first.
bobo9900 said:
Read the last page, someone manage to re flash 10.0.2.0.
If you wanna flash old version, check ARB level first.
Click to expand...
Click to collapse
OK checked. Through fastboot check of ARB I get:
fastboot getvar anti
getvar:anti FAILED (remote: GetVar Variable Not found)
finished. total time: 0.016s
Wondering again why again an error lol
TRhrough opening flash_all.bat file I see:
CURRENT_ANTI_VER=4
fastboot %
which means I cant downgrade, ya?
Hi!
i installed the global rom via TWRP recovery
now when i try to set up new device all i get is chinese region
Then i hit next and started looping for some reason and message showing "Find Device Automatically Closed"
After multiple loops it restarts and the TWRP is gone
i tried multiple Roms all the same
if anyone has a clue please help
The solution : use MiFlash not TWRP and careful just flash not flash and lock you might get into a bootloop if you made that mistake just like i did don't panic use Mi Unlock
After it reboots setup your device say goodbye to Chinese bloatware.
Thx @nhtnokia
Flash cust.img or use MiFlash to flash stock ROM.
nhtnokia said:
Flash cust.img or use MiFlash to flash stock ROM.
Click to expand...
Click to collapse
I cant find firmware .img i only found Tgz file type
i have done a backup before flashing i get file types .win001.sha2
faroukxda said:
I cant find firmware .img i only found Tgz file type
i have done a backup before flashing i get file types .win001.sha2
Click to expand...
Click to collapse
I think you should use MiFlash to change from CHINA to the GLOBAL version.
nhtnokia said:
Flash cust.img or use MiFlash to flash stock ROM.
Click to expand...
Click to collapse
nhtnokia said:
I think you should use MiFlash to change from CHINA to the GLOBAL version.
Click to expand...
Click to collapse
i think i screwed up very bad. i flashed and locked with miflash now it goes directly to recovery
saying miui vesion isn't supported
is there any way that i can reflash a locked device to stock firmware " Hard Reset" ?
faroukxda said:
i think i screwed up very bad. i flashed and locked with miflash now it goes directly to recovery
saying miui vesion isn't supported
is there any way that i can reflash a locked device to stock firmware " Hard Reset" ?
Click to expand...
Click to collapse
If your bootloader is still unlocked. I can help you. Let's inbox me.
nhtnokia said:
If your bootloader is still unlocked. I can help you. Let's inbox me.
Click to expand...
Click to collapse
check DM
hey guys, successfully flashed the global rom over my redmagic 6 pro CN version but decided to go back to the CN rom, but when I try to install it via local update it results in a recovery boot loop and the only option is to do a factory reset, but when I do a factory reset, for some reason it goes back to the Global Rom. Any tips on what I need to do? thanks
auerick said:
hey guys, successfully flashed the global rom over my redmagic 6 pro CN version but decided to go back to the CN rom, but when I try to install it via local update it results in a recovery boot loop and the only option is to do a factory reset, but when I do a factory reset, for some reason it goes back to the Global Rom. Any tips on what I need to do? thanks
Click to expand...
Click to collapse
Personally what I would do is extract the boot image from the CN rom zip and fastboot flash it after you flash the CN rom via local update. You will have to be bootloader unlocked of course. You can always relock after you've got the CN rom up and running.
bob24260 said:
Personally what I would do is extract the boot image from the CN rom zip and fastboot flash it after you flash the CN rom via local update. You will have to be bootloader unlocked of course. You can always relock after you've got the CN rom up and running.
Click to expand...
Click to collapse
I actually tried that but then it get's stuck on the Nubia logo, so something must have gone wrong somewhere, and one odd thing is if I try installing the latest V2.63 CN rom via local update it tells me that the package is not compatible with the phone. At least the Redmagic 5G had the local update option on its recovery. Nothing at all on the Redmagic 6 Pro. Isn't recovery.img included in the payload.bin? doesn't seem to be there when I dumped the payload
auerick said:
hey guys, successfully flashed the global rom over my redmagic 6 pro CN version but decided to go back to the CN rom, but when I try to install it via local update it results in a recovery boot loop and the only option is to do a factory reset, but when I do a factory reset, for some reason it goes back to the Global Rom. Any tips on what I need to do? thanks
Click to expand...
Click to collapse
Hi there, can you describe the whole steps to flash your RM6 pro from CN to global?
Which rom did you use? EU or non-EU?
Thanks for the reply.
cannon3025 said:
Hi there, can you describe the whole steps to flash your RM6 pro from CN to global?
Which rom did you use? EU or non-EU?
Thanks for the reply.
Click to expand...
Click to collapse
I installed both just to see if I cam go back to CN rom once I'm on either Rom
Basically just downloaded the Global ROM file from the Nubia website, put it on my phones root folder, then did a local update, using the system update local update setting
auerick said:
I actually tried that but then it get's stuck on the Nubia logo, so something must have gone wrong somewhere, and one odd thing is if I try installing the latest V2.63 CN rom via local update it tells me that the package is not compatible with the phone. At least the Redmagic 5G had the local update option on its recovery. Nothing at all on the Redmagic 6 Pro. Isn't recovery.img included in the payload.bin? doesn't seem to be there when I dumped the payload
Click to expand...
Click to collapse
I believe the recovery is part of the boot image now. I've dumped the payload too and I'll have a quick look and see if it's present. I have all the files for the US, global version. It's 4.1.2 I believe. I'll be happy to help any way I can. I just had a bad experience today... I've had my 6 Pro a week and already the cord has quit working. Not a good sign. I'm starting to regret my purchase.
auerick said:
I actually tried that but then it get's stuck on the Nubia logo, so something must have gone wrong somewhere, and one odd thing is if I try installing the latest V2.63 CN rom via local update it tells me that the package is not compatible with the phone. At least the Redmagic 5G had the local update option on its recovery. Nothing at all on the Redmagic 6 Pro. Isn't recovery.img included in the payload.bin? doesn't seem to be there when I dumped the payload
Click to expand...
Click to collapse
I checked and sure enough no recovery image. Pretty sure it's baked into the boot image. Perhaps try the 4.1.2 boot image? That may boot it. Seems like you've rebranded it global version by flashing the global rom. That's a possibility anyways
bob24260 said:
I checked and sure enough no recovery image. Pretty sure it's baked into the boot image. Perhaps try the 4.1.2 boot image? That may boot it. Seems like you've rebranded it global version by flashing the global rom. That's a possibility anyways
Click to expand...
Click to collapse
ok I'll try to play around with it, won't flashing the 4.1.2 boot.img cause a brick?
auerick said:
ok I'll try to play around with it, won't flashing the 4.1.2 boot.img cause a brick?
Click to expand...
Click to collapse
Shouldn't cause a brick. If you've already flashed global before there shouldn't be any problem. But to be sure instead of flashing just fastboot boot the image.
Fastboot boot boot.img
This will allow you the luxury of trying it without actually flashing it. If it hangs up simply reboot by holding power.
bob24260 said:
Shouldn't cause a brick. If you've already flashed global before there shouldn't be any problem. But to be sure instead of flashing just fastboot boot the image.
Fastboot boot boot.img
This will allow you the luxury of trying it without actually flashing it. If it hangs up simply reboot by holding power.
Click to expand...
Click to collapse
cool didn't know I could do that, thanks for the tip
bob24260 said:
Personally what I would do is extract the boot image from the CN rom zip and fastboot flash it after you flash the CN rom via local update. You will have to be bootloader unlocked of course. You can always relock after you've got the CN rom up and running.
Click to expand...
Click to collapse
i tried this and it work but i forgot to wipe ..now i cant save images, files etc. but it doesnt matter.. anyway can you plese tell me how to relock my bootloader? some commands i think? im not familiar with relocking ..only unlocking xD this is my first time relocking bootloader
kittyshik said:
i tried this and it work but i forgot to wipe ..now i cant save images, files etc. but it doesnt matter.. anyway can you plese tell me how to relock my bootloader? some commands i think? im not familiar with relocking ..only unlocking xD this is my first time relocking bootloader
Click to expand...
Click to collapse
fastboot flashing lock
though this will prompt another factory reset
auerick said:
fastboot flashing lock
though this will prompt another factory reset
Click to expand...
Click to collapse
thanks man appreciated!
where did you get the CN rom? can you share here?
here bro https://ui.nubia.cn/rom/detail/68
kittyshik said:
here bro https://ui.nubia.cn/rom/detail/68
Click to expand...
Click to collapse
thanks
Hello what are the steps and commands to go back to the CN rom? I cannot get it from all your comments here :'(
bob24260 said:
Personally what I would do is extract the boot image from the CN rom zip and fastboot flash it after you flash the CN rom via local update. You will have to be bootloader unlocked of course. You can always relock after you've got the CN rom up and running.
Click to expand...
Click to collapse
hmm i tried this method, it seems like my phone just went back to global rom even after cn boot image flashed
China rom is faster than global
If Anyone installed china dev rom Android 12 on your device , give installation guide if possible thank you
drmagesh7 said:
If Anyone installed china dev rom Android 12 on your device , give installation guide if possible thank you
Click to expand...
Click to collapse
Unlock your device. Flash the china rom of 11. Root it and install this module throw magisk. Type 7 times on the miui logo in the update settings. Download the china recoveryy rom beta 12 on the root of your tablet. Select the three dot on the right and choose update from a local package. Choose the rom china beta 12 and wait to install it. You can root the 12 too if you want. You can find the guides of every point in this forum. Root, unlock, how to flash rom ecc...
Edit: there is a fastboot rom from the beta 12. You can install it directly throw xiaomi flash tool or throw the adb command, without to install before the china 11.
Link: https://xiaomirom.com/en/download/xiaomi-pad-5-nabu-weekly-V13.0.0.1.46.DEV/#china-fastboot
Thank you so much
Got stuck on fastboot mode not working falsh all and mi flash says error reading sparse file like that I have downloaded many files, it's again comes like this, help through this thank you
drmagesh7 said:
Got stuck on fastboot mode not working falsh all and mi flash says error reading sparse file like that I have downloaded many files, it's again comes like this, help through this thank you
Click to expand...
Click to collapse
You have to boot in bootloader mode. Adb reboot bootloader
My device totally dead , it's not turning on its completely black screen power button and volume down method it's not working any solution
drmagesh7 said:
My device totally dead , it's not turning on its completely black screen power button and volume down method it's not working any solution
Click to expand...
Click to collapse
are you sure you flashed the correct CN firmware for nabu?
Blanc_WhiteHeart said:
are you sure you flashed the correct CN firmware for nabu?
Click to expand...
Click to collapse
Ya this one