Related
Hi all,
yesterday I did the update to 7.0 via TWRP. Everything is working well, but I am missing Xposed.
So, how can I downgrade to 6.0.1? Just flashing 6.0.1 via TWRP?
Ask support. They told us when u have beta they've a special roll back build to flash? I hear something like this.
Just flash twrp, Format data, wipe everything flash the stock MM rom zip and reboot if using custom rom make sure to flash correct firmware for that version
It depends the steps you took, I think there are some threads about this but from my knowledge if you are still on ext4, unlocked bootloader and custom recovery, a simple clean flash should work...
But do check
Here is something that could help https://forum.xda-developers.com/oneplus-3/how-to/guide-downgrade-to-mm-flashing-ob8-t3511161/page3
ox_eye said:
Hi all,
yesterday I did the update to 7.0 via TWRP. Everything is working well, but I am missing Xposed.
So, how can I downgrade to 6.0.1? Just flashing 6.0.1 via TWRP?
Click to expand...
Click to collapse
1. Take a nandroid backup
2. Boot to TWRP
3. Wipe-> advanced wipe-> system change partition to TWRP
4. Wipe- all
5. flash 3.0.2 TWRP
6. Reboot to TWRP and then flash 6.0.1
Hit thanks if I helped
Sent from my iPhone using Tapatalk
I have tried to flash 3.0.2-1 twrp but i cannot. Is there any solution for downgrade? Even with toolkit v2.6 is impossible.
bam bam boom said:
I have tried to flash 3.0.2-1 twrp but i cannot. Is there any solution for downgrade? Even with toolkit v2.6 is impossible.
Click to expand...
Click to collapse
Use the latest twrp beta version or modded twrp by eng.stk, backup data and clean flash 3.2.8 and make sure you change data partition to ext4.
ox_eye said:
Hi all,
yesterday I did the update to 7.0 via TWRP. Everything is working well, but I am missing Xposed.
So, how can I downgrade to 6.0.1? Just flashing 6.0.1 via TWRP?
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-3/help/dont-device-questions-t3567164
HI,
Every time I flash a custom rom, it doestn't boot. it goes back to TWRP..
The only time it boots is when I flash rom with official twrp. And it boots with few things missing like magisk and other apps. Bluspark and codeworks doesn't boot.
Stock rom downloaded from oneplus also doesn't boot if the recovery is not official TWRP or the stock one..
Is there something I am missing?
Thanks...
Any ideas?
bibekdwa said:
Any ideas?
Click to expand...
Click to collapse
Try wipe data after reboot to recovery
Sent from my ONEPLUS A5010 using Tapatalk
I wiped data.. it boots.. but, without magisk. so had to flash magisk.. then, it doesn't boot..
MsuatafaKhatab said:
Try wipe data after reboot to recovery
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
bibekdwa said:
I wiped data.. it boots.. but, without magisk. so had to flash magisk.. then, it doesn't boot..
Click to expand...
Click to collapse
No problem to flash later
Sent from my ONEPLUS A5010 using Tapatalk
Did you try flashing stock ROM and the Magisk uninstall zip? This removes everything Magisk related. Then boot, only flash Magisk and see if that works for you
Macusercom said:
Did you try flashing stock ROM and the Magisk uninstall zip? This removes everything Magisk related. Then boot, only flash Magisk and see if that works for you
Click to expand...
Click to collapse
I am now back to stock OB1. Whatever custom rom I flash, it has been troublesome.
Last flash was successful, Audax rom. It had nothing missing. I flashed speaker mod, it worked. Then, I tried a custom kernel, blu-spark for nougat. it bootlooped to Qualcomm loader mode..
I have flashed many phones in the past without any problems for 4 years.. but this time it's not working for me..
Is there any 5T specific step that I am missing?
1. Unlock bootloader.
2. Flash Custom recovery. And boot it.
3. Wiped everything including internal storage.
4. Reboot to recovery.
5. Flashed Rom and then magisk and no-verity.
6. Wiped cache ( only sometimes)
7. After this step, the rom doesn't boot. It comes back to recovery using blu_spark and codeworkx... Stock twrp lets it boot but without magisk.
Then, I flashed magisk... It did the same thing, reboots to recovery.
I tried using magisk uninstaller. It didn't work.
Everytime it goes in to loop, I always had to format data because internal storage was not shown. (0mb)
I have never felt this noob...
Correct me if I'm wrong but is the no-verity zip necessary? Doesn't Magisk do that automatically? Just asking as I have stock ROM with Magisk and Xposed and never any issues.
Flash ROM and Gapps and then boot into system. After setting up, flash twrp again and Magisk. No-verity is needed only if you wanna flash certain unencrypted ROMs, in which case formatting data would also be required.
Did you do both fastboot OEM unlock, as well as enabling the option in developer options?
Macusercom said:
Correct me if I'm wrong but is the no-verity zip necessary? Doesn't Magisk do that automatically? Just asking as I have stock ROM with Magisk and Xposed and never any issues.
Click to expand...
Click to collapse
I don't know but without flashing no-verity zip, i haven't been able to boot any of these custom roms for 5t.
Flashing magisk on stock rom has also worked for me, but strangely I can't boot the custom roms on XDA. Liquid rom was successful but I wanted OOS custom roms. So far, I am unsuccessful.
Stock rom with magisk does fulfill my requirements.
But, I am curious about the problem I am having..
bibekdwa said:
I don't know but without flashing no-verity zip, i haven't been able to boot any of these custom roms for 5t.
Flashing magisk on stock rom has also worked for me, but strangely I can't boot the custom roms on XDA. Liquid rom was successful but I wanted OOS custom roms. So far, I am unsuccessful.
Stock rom with magisk does fulfill my requirements.
But, I am curious about the problem I am having..
Click to expand...
Click to collapse
exactly same situation here sir..
so many rom flashes in many htc devices and never ever had those problems
what's the missing point?
sardelisp said:
exactly same situation here sir..
so many rom flashes in many htc devices and never ever had those problems
what's the missing point?
Click to expand...
Click to collapse
I was having same issues so i flashed blu spark twrp and im golden hope this helps
forty9er said:
I was having same issues so i flashed blu spark twrp and im golden hope this helps
Click to expand...
Click to collapse
The only twrp I have tried is blu_spark anyway.
How can I ota update rooted OOS with twrp recovery?
Darkweb_182 said:
How can I ota update rooted OOS with twrp recovery?
Click to expand...
Click to collapse
Official TWRP will not be able to update with the OTA update, only with the full ROM zip. There seems to be some other recoveries capable of that but since I don't have any experience with them, I refrain from naming them.
tnsmani said:
Official TWRP will not be able to update with the OTA update, only with the full ROM zip. There seems to be some other recoveries capable of that but since I don't have any experience with them, I refrain from naming them.
Click to expand...
Click to collapse
So how can I update oos while keeping the root access and not losing twrp recovery?
Darkweb_182 said:
So how can I update oos while keeping the root access and not losing twrp recovery?
Click to expand...
Click to collapse
Assuming that you are on 9.0.2 and want to update to 9.0.3, you wipe system, caches and data (excluding internal storage) and flash 9.0.3 full zip. Then boot back into recovery (without booting into system). You should boot into TWRP. If you do, flash Magisk and boot into system. If stock recovery over writes TWRP, flash TWRP image in bootloader (fastboot) and then Magisk and boot into system.
If you are on Oreo and want OOS 9, it is slightly more complicated. You will have to format data (take a backup of your files and transfer to PC/Laptop) and then boot back into recovery and then flash the ROM and do the steps above. This is because of encryption issues.
tnsmani said:
Assuming that you are on 9.0.2 and want to update to 9.0.3, you wipe system, caches and data (excluding internal storage) and flash 9.0.3 full zip. Then boot back into recovery (without booting into system). You should boot into TWRP. If you do, flash Magisk and boot into system. If stock recovery over writes TWRP, flash TWRP image in bootloader (fastboot) and then Magisk and boot into system.
If you are on Oreo and want OOS 9, it is slightly more complicated. You will have to format data (take a backup of your files and transfer to PC/Laptop) and then flash TWRP in bootloader, boot into it and then flash the ROM and do the steps above. This is because of encryption issues.
Click to expand...
Click to collapse
Yes I'm on 9.0.2 and want to update to 9.0.3
Is there any other way to do it without losing all the data?
Darkweb_182 said:
Yes I'm on 9.0.2 and want to update to 9.0.3
Is there any other way to do it without losing all the data?
Click to expand...
Click to collapse
Beware that there are some reports of the requirement of formatting again when updating from 9.0.2 to 9.0.3, though I did not face it. A backup is a must (on PC/Laptop, not on the phone itself).
I don't know of any other 'safe' way of doing it without data loss (assuming that by data, you mean internal storage).
How to update to 9.0.3
Darkweb_182 said:
How can I ota update rooted OOS with twrp recovery?
Click to expand...
Click to collapse
You cant update with OTA updates, you need the full rom.
I dont know how you updated to (8.0 to 9.0 the first time),
i unrooted and reset my prone while still on 8.0
and then i updated to 9.0 with official recovery after that i installed twrp and rooted with magisk.
If you dit anything different you might run into problems.
1. Download and update to the latest magisk in TWRP. (If you already have it installed skip this, but still download it to a folder on your phone).
2. Download the full rom to your phone, full rom here:
https://forum.xda-developers.com/oneplus-3/how-to/rom-oxygen-os-9-0-3-android-pie-oneplus-t3937636.
3. Install the rom with twrp, no need to wipe anything.
4. Right after install the latest version of magisk.
5. Reboot your phone to system.
6. Wait until phone starts (it might take up to 7/10 minutes).
7. Done
jeffrey268 said:
You cant update with OTA updates, you need the full rom.
I dont know how you updated to (8.0 to 9.0 the first time),
i unrooted and reset my prone while still on 8.0
and then i updated to 9.0 with official recovery after that i installed twrp and rooted with magisk.
If you dit anything different you might run into problems.
1. Download and update to the latest magisk in TWRP. (If you already have it installed skip this, but still download it to a folder on your phone).
2. Download the full rom to your phone, full rom here:
https://forum.xda-developers.com/oneplus-3/how-to/rom-oxygen-os-9-0-3-android-pie-oneplus-t3937636.
3. Install the rom with twrp, no need to wipe anything.
4. Right after install the latest version of magisk.
5. Reboot your phone to system.
6. Wait until phone starts (it might take up to 7/10 minutes).
7. Done
Click to expand...
Click to collapse
I switched from custom rom to oos 9.0.2
So basically just dirty flash oos 9.0.3 from twrp?
Darkweb_182 said:
I switched from custom rom to oos 9.0.2
So basically just dirty flash oos 9.0.3 from twrp?
Click to expand...
Click to collapse
Yes, but have a backup.
Hello,
i have version 11.0.2.0 Global on the device with twrp, magisk and edXposed.
Now I have seen that there is already a global version 11.0.6.0.
In my case, how can I update to a new version without losing the data and settings?
And one more question in general. Version 11.0.6.0 is not shown to me via OTA. Here it says, latest stable version 11.0.2.0. Is it not rolled out via OTA?
And if there was a newer version available via OTA, could I install the update despite TWRP?
hmarder said:
Hello,
i have version 11.0.2.0 Global on the device with twrp, magisk and edXposed.
Now I have seen that there is already a global version 11.0.6.0.
In my case, how can I update to a new version without losing the data and settings?
And one more question in general. Version 11.0.6.0 is not shown to me via OTA. Here it says, latest stable version 11.0.2.0. Is it not rolled out via OTA?
And if there was a newer version available via OTA, could I install the update despite TWRP?
Click to expand...
Click to collapse
I (without root) flashed the OTA on 11.0.2.0 global PGGMIXM to 11.0.6.0, but, to flash with root... Maybe (I dont know if it will brick) but you can try flash a recovery version of 11.0.6.0
hmarder said:
Hello,
i have version 11.0.2.0 Global on the device with twrp, magisk and edXposed.
Now I have seen that there is already a global version 11.0.6.0.
In my case, how can I update to a new version without losing the data and settings?
And one more question in general. Version 11.0.6.0 is not shown to me via OTA. Here it says, latest stable version 11.0.2.0. Is it not rolled out via OTA?
And if there was a newer version available via OTA, could I install the update despite TWRP?
Click to expand...
Click to collapse
I had exactly the same setup as you - here's what I did: 1 - Downloaded full rom from official Mi website (MIUI Global 11.0.6.0(PGGMIXM) 2 - Moved rom to root storage 3 - Flashed rom with TWRP, and voila! Updated to latest stable rom. Just remember to flash TWRP recovery again through Fastboot, because you will have stock recovery after update. I am using LTWRP- 3.3.1 -0924 and rooted and installed Magisk, without issues
hmarder said:
Hello,
i have version 11.0.2.0 Global on the device with twrp, magisk and edXposed.
Now I have seen that there is already a global version 11.0.6.0.
In my case, how can I update to a new version without losing the data and settings?
And one more question in general. Version 11.0.6.0 is not shown to me via OTA. Here it says, latest stable version 11.0.2.0. Is it not rolled out via OTA?
And if there was a newer version available via OTA, could I install the update despite TWRP?
Click to expand...
Click to collapse
One thing you forgot to mention is what region is your phone (not your Rom). If Chinese you may have to be extra cautious and steps above might not work for you.
Good luck!
KonahZave said:
I (without root) flashed the OTA on 11.0.2.0 global PGGMIXM to 11.0.6.0, but, to flash with root... Maybe (I dont know if it will brick) but you can try flash a recovery version of 11.0.6.0
Click to expand...
Click to collapse
Interesting. I'm still on rooted miui 10 4.5.0 PGGEUXM rooted magisk and twrp recovery-红米Note8Pro-3.3.1-9.0.img
I didn't update yet as bricking started to happen and I can't miss my phone as a daily driver.
Normally I would flash the full ROM, flash magisk, wipe cache and reboot.
So flashing full ROM doesn't break root?
Can't we flash recovery by twrp after flashing ROM instead by flashing by fastboot?
Isnt secure flash twrp after the ROM.
donkyshot said:
So flashing full ROM doesn't break root?
Can't we flash recovery by twrp after flashing ROM instead by flashing by fastboot?
Click to expand...
Click to collapse
Flashing a full rom will break root, and install stock recovery...
It is too risky to flash another recovery with twrp (possible brick)
so where to put official update on sd card?
download recovery rom?
unoturbo1 said:
I had exactly the same setup as you - here's what I did: 1 - Downloaded full rom from official Mi website (MIUI Global 11.0.6.0(PGGMIXM) 2 - Moved rom to root storage 3 - Flashed rom with TWRP, and voila! Updated to latest stable rom. Just remember to flash TWRP recovery again through Fastboot, because you will have stock recovery after update. I am using LTWRP- 3.3.1 -0924 and rooted and installed Magisk, without issues
Click to expand...
Click to collapse
I just brought rmn8p with miui 11.0.6.0 ,so it is ok to use LRTWRP-3.3.1 -0924. I came across a new version -1104, I'll try it after unlock the bootloader. After that flash preloader then trwp.
Use LR.TWRP, it got an option to make the TWRP persist on every OTA.
Also LR.TWRP = less headache on Xiaomi devices.
Here's the latest build: https://mega.nz/folder/cMAT3Q4b#7CbPV7sbEuSEdP7cehXJ-w
tze_vitamin said:
so where to put official update on sd card?
download recovery rom?
Click to expand...
Click to collapse
??
Put on external sd card dude
unoturbo1 said:
I had exactly the same setup as you - here's what I did: 1 - Downloaded full rom from official Mi website (MIUI Global 11.0.6.0(PGGMIXM) 2 - Moved rom to root storage 3 - Flashed rom with TWRP, and voila! Updated to latest stable rom. Just remember to flash TWRP recovery again through Fastboot, because you will have stock recovery after update. I am using LTWRP- 3.3.1 -0924 and rooted and installed Magisk, without issues
Click to expand...
Click to collapse
For chinese, this will brick the phone. See this instead.
Guys I Just see This video and in it shows the update process, with ltwrp, when the recovery capture the process and update even without losing data, its This True?, somebody has tried?
Link.
This will brick every phone. I brick my EU ROM, with this method of update rooted phone.
What is correct solution to update rooted phone?
Redmi Note 8 Pro, 11.0.2 QGGEUXM, TWRP 3.3.1 1210, Magisk 20.3 -> 12.0.1 QGGEUXM
System say there exists update, i choose download, select reboot, but after reboot i end up in TWRP but nothing happened. After exit i boot to old 11.0.2 system with message that update fail.
Edit 1: after 2. download/update/reboot TWRP start installing image ...
Edit 2: after automatic update system say 12.0.1, just loosing root (all apps stay)
Edit 3: installed TWRP again, Magisk (there was little problem because Magisk Manager say "not installed", but after some googlig i fix that. So i update system without reinstalling apps or loosing data.
Clear solution is probably download full rom from official Mi website and flash selected rom with TWRP (flash TWRP recovery again, repeat root process, to get root back). See next post.
RedMu said:
So what is correct solution to update rooted phone?
Redmi Note 8 Pro, 11.0.2 QGGEUXM, TWRP 1210, Magicks 20.3 -> 12.0.1 QGGEUXM
Now system say there exists update, i choose download, select reboot, but after reboot i end up in TWRP. After exit i boot to old 11.0.2 system with message that update fail.
So solution is probably downloaded full rom from official Mi website and flash selected rom with TWRP (flash TWRP recovery again, repeat root process, to get root back).
So what is correct way for update in this case?
Click to expand...
Click to collapse
This is how I upgraded, try at your own risk.
Download full recovery zip of MIUI 12 and latest magisk
Create twrp Backup just in case
In LR TWRP 10 mount & format system, cache, dalvik, vendor.
Flash full rom (not ota!)
Press home to return to the main screen Choose Advanced-File Manager item >system_root / system / folder at the bottom if there is a recovery_fromboot.p file delete it.
Go back to Advanced and select Close AVB2.0 and confirm with a swipe to the right.
flash Magisk
boot to system
First boot takes a while, relax and grab a drink
Remember to backup and close AVB!
Thank you so much for sharing these steps. I have questions for a couple of steps below:
donkyshot said:
This is how I upgraded, try at your own risk.
Download full recovery zip of MIUI 12 and latest magisk
Create twrp Backup just in case
In LR TWRP 10 mount & format system, cache, dalvik, vendor.
Click to expand...
Click to collapse
What is TWRP 10? Do I format first and then mount? I usually wipe system, cache, dalvik and then "install" the full rom (your next step), but i never try "mount" here. What does mount do here? what is wiping vender and mounting vender?
donkyshot said:
[*]Flash full rom (not ota!)
[*]Press home to return to the main screen Choose Advanced-File Manager item >system_root / system / folder at the bottom if there is a recovery_fromboot.p file delete it.
[*]Go back to Advanced and select Close AVB2.0 and confirm with a swipe to the right.
Click to expand...
Click to collapse
There are two check box here. one is "close the boot verification of avb2.0" the other is "close the DMVerity of avb2.0". Do O check one of both?
Thank you!
po1 said:
Thank you so much for sharing these steps. I have questions for a couple of steps below:
What is TWRP 10? Do I format first and then mount? I usually wipe system, cache, dalvik and then "install" the full rom (your next step), but i never try "mount" here. What does mount do here? what is wiping vender and mounting vender?
There are two check box here. one is "close the boot verification of avb2.0" the other is "close the DMVerity of avb2.0". Do O check one of both?
Thank you!
Click to expand...
Click to collapse
Recovery LR TWRP for Android 10
https://androidfilehost.com/?fid=8889791610682889486
First mount system, cache, dalvik, vendor
Than format system, cache, dalvik, vendor
Without mounting folders they won't be mounted
►go back to your main screen: ADVANCED- close AVB 2.0 then swipe to confirm, just tick only 1st box, ignore the second box
Hey guys. Until the RR dev makes a thread, this will continue to stay in Discussion. I am NOT the dev for RR. So wanted to get the rom more exposure.
Rom: https://sourceforge.net/projects/resurrectionremix-ten/files/instantnoodlep/
Kernel source: https://github.com/luk1337/android_kernel_oneplus_sm8250
Changelog: https://get.resurrectionremix.com/ten/changelog/Changelog.txt
Be on OOS 10(both slots)(local upgrade last OOS 10 for slot b)
Flash twrp both slots(https://downloads.sourceforge.net/p...=cfhcable&r=https://forum.xda-developers.com/)
Flash rom
Reboot twrp
Wipe userdata(always a must when switching between OOS and custom)
(Optional) install kernel and magisk
Reboot
**UPDATE** this flash instructions work. I use these and ONLY these instructions. If you have a better way, good for you, but if you can't get it to boot, use these.
***UPDATE 2*** if you have installed Android 11 prior to installing this rom, you must msm back to OOS 10 and local upgrade OOS 10 again to slot b and only use Android 10 recovery
Nice one. :good:
Is twrp ok to wipe now? Or would we need stock to do so?
If the latter then may be worth booting twrp and retaining stock recovery to wipe.
Good to see a ROM thread for this.
Excellent.
My thanks to the dev too, it's appreciated.
dladz said:
Nice one. :good:
Is twrp ok to wipe now? Or would we need stock to do so?
If the latter then may be worth booting twrp and retaining stock recovery to wipe.
Good to see a ROM thread for this.
Excellent.
My thanks to the dev too, it's appreciated.
Click to expand...
Click to collapse
I've had no issues using latest twrp
jamescable said:
I've had no issues using latest twrp
Click to expand...
Click to collapse
Does it have oos cam?
areyouanand said:
Does it have oos cam?
Click to expand...
Click to collapse
Honestly, don't know. I don't use OOS can, but I don't think so
jamescable said:
Hey guys. Until the RR dev makes a thread, this will continue to stay in Discussion. I am NOT the dev for RR. So wanted to get the rom more exposure.
Rom: https://get.resurrectionremix.com/?dir=ten/instantnoodlep
Kernel source: https://github.com/luk1337/android_kernel_oneplus_sm8250
Be on OOS
Flash twrp both slots
Flash rom
Reboot twrp
Wipe userdata(always a must when switching between OOS and custom)
(Optional) install kernel and magisk
Reboot
Click to expand...
Click to collapse
Why to boot to twrp after flashing the rom?
We can just boot the twrp( not flash it)
Flash rom
Flash magisk ( optional)
Format data
Reboot
It should be mentioned that these builds are blind builds. The Dev doesn't own the device.
Kollachi said:
It should be mentioned that these builds are blind builds. The Dev doesn't own the device.
Click to expand...
Click to collapse
Correct but doesn't matter. I tested first few builds before they were released and now alots of people used them. They aren't beta or alpha but stable. So? What's your point?
cultofluna said:
Why to boot to twrp after flashing the rom?
We can just boot the twrp( not flash it)
Flash rom
Flash magisk ( optional)
Format data
Reboot
Click to expand...
Click to collapse
8pro has a recovery partition. So unless you flash a rom that overwrites twrp with another recovery (stock OOS, etc) then twrp will remain after rom flash
jamescable said:
Correct but doesn't matter. I tested first few builds before they were released and now alots of people used them. They aren't beta or alpha but stable. So? What's your point?
Click to expand...
Click to collapse
It's simple. If people run into issues or whatever he can't probably fix it. It was the same with treskmod for example.
Kollachi said:
It's simple. If people run into issues or whatever he can't probably fix it. It was the same with treskmod for example.
Click to expand...
Click to collapse
[Mod Edit] Telegram link removed.
jamescable said:
[Mod Edit] Telegram link removed.
Click to expand...
Click to collapse
He is blind building from latest los source that's all. Respect him for doing that, but it's not 100% guarantee for a fully working rom.
jamescable said:
8pro has a recovery partition. So unless you flash a rom that overwrites twrp with another recovery (stock OOS, etc) then twrp will remain after rom flash
Click to expand...
Click to collapse
This is something that i already know...
Questions are...
1. why to boot to twrp after flashing the rom( useless step)
2. Why to flash twrp on both slots and not inly boot it
cultofluna said:
This is something that i already know...
Questions are...
1. why to boot to twrp after flashing the rom( useless step)
2. Why to flash twrp on both slots and not inly boot it
Click to expand...
Click to collapse
1. Is NOT useless. That is for clean flashing which is ALWAYS recommend by every dev. When you dirty flash, it's at your own peril.
And 2. Once again. The OnePlus 8 pro has a recovery partition. So twrp does not get overwritten when you flash a rom. Like on 7 pro, we had to flash twrp after every rom flash. Not needed on 8 pro.
cultofluna said:
This is something that i already know...
Questions are...
1. why to boot to twrp after flashing the rom( useless step)
2. Why to flash twrp on both slots and not inly boot it
Click to expand...
Click to collapse
1. I think he meant to say reboot to recovery and not boot the twrp.img.
2. Yes you can boot twrp only. That's what im doing since OP7. But you will need to do this everytime you wanna flash something with twrp.
jamescable said:
1. Is NOT useless. That is for clean flashing which is ALWAYS recommend by every dev. When you dirty flash, it's at your own peril.
And 2. Once again. The OnePlus 8 pro has a recovery partition. So twrp does not get overwritten when you flash a rom. Like on 7 pro, we had to flash twrp after every rom flash. Not needed on 8 pro.
Click to expand...
Click to collapse
On your flashing instructions you said. "flash twrp on both slots"
So im asking one more time,... why not just to boot the twrp img on fastboot and flash the rom...
What is this about recovery partition ... everybody knows that the 8 pro has a separate recovery partition
EDIT..Reboot to twrp after flashing the Rom is useless...
I insist. .dont needed
cultofluna said:
On your flashing instructions you said. "flash twrp on both slots"
So im asking one more time,... why not just to boot the twrp img on fastboot and flash the rom...
What is this about recovery partition ... everybody knows that the 8 pro has a separate recovery partition
EDIT..Reboot to twrp after flashing the Rom is useless...
I insist. .dont needed
Click to expand...
Click to collapse
It's in the pic I uploaded. Even the twrp dev said to flash it. So you won't have to fastboot boot anymore. Once you flash it. It's on your phone and won't go away when you reboot recovery
Every phone used to have a boot(kernel) partition, system partition, modem/radio partition, bootloader, userdata, and a few other INCLUDING recovery partition. Recently, the recovery was missing but now it's back. So we no longer have to have to boot twrp but flash it
Hello everyone, I need help installing this rom please, I have the latest TWRP 3.4.0-14-Mauronofrio installed in both slots, latest stable OOS in both slots, I have an IN2025 and for some reason I get this error with TWRP. Thanks in advance guys.
oscarmaldonado said:
Hello everyone, I need help installing this rom please, I have the latest TWRP 3.4.0-14-Mauronofrio installed in both slots, latest stable OOS in both slots, I have an IN2025 and for some reason I get this error with TWRP. Thanks in advance guys.
Click to expand...
Click to collapse
That is strange. I also have 2025. Try moving the rom to phone instead of usb device. Since this is an updated twrp may be an issue. However. I did NOT have OOS installed on both slots. I flashed latest OOS full rom, used OOS recovery to wipe data. Booted and then flashed twrp to both slots, flashed RR, reboot recovery and flashed magisk