Hello All,
I have GPE version of GPad running Kitkat 4.4 Stock ROM. Last month I have used following link to enable chromecast mirroring. Due to the issues i have uninstalled superuser app and did factory reset. After that all well! I mean no issues with tablet.
http://forum.xda-developers.com/har...experimental-enable-mirroring-device-t2812193
Yesterday I tried to sideload the GPE lollipop update but prompted with following error.
"/system/etc/audio_policy.conf" has unexpected contents.
E:Error in /tmp/update.zip
(Status 7)
Installation aborted.
This morning I saw system update notification for Lollipop upgrade and opted to install it, but without any further msg during the system update it prompted with "Error!" After that I did factory reset. When it reboots starts optimizing 48 apps, but it prompts with following sequence of messages:
"Unfortunately sun beam has stopped. "
None of the apps loaded , no access to setting, just empty screen and on screen buttons at the bottom.
I spent quite some time looking around in xda to restore back to factory, none seems to work.
1. Tried flashing original stock .tot file, getting "Download user image is only available in the online environment!!
2. adb sideload, "/system/etc/audio_policy.conf" has unexpected contents
3. To Flash TWRP i am not getting access to setting to enable USB debugging.
Now i cant even put the G Pad in adb as i dont have access to settings to put in USB debug mode. vol down+power puts into bootloader, but cant access to adb commands.
Now I can only access to recovery and do sideload. but i am stuck with "/system/etc/audio_policy.conf" has unexpected contents error. Can someone share kitkat original version of audio_policy.conf? also how i can replace the exiting file as i dont have access to adb?
Greatly appreciate your help to bring back the G Pad.
regards
Raj
You can boot twrp from fastboot and flash either 4.4.4 or 5.0 back onto your tablet. Look at the thread in Android development for more details on flashing the stock images using twrp
Thanks! I was able to get back to kitkat with following method. I was able to flash recovery its now back to complete stock kitkat now.
http://forum.xda-developers.com/lg-...510-gpe-4-4-4-ktu84p-l002-stock-twrp-t2797883
After this I got system update notification to lollipop. Again got "Error!" msg during the install process.
I tried adb side load, got following error!
failed to verify whole-file signature
signature verification failed
installation aborted.
Any thought whats going wrong there?
Hi,
after giving 4.4.2-StockROM a (long) try, I wanted to install [SM-T31X][5.1.1] CyanogenMod 12.1 unofficial build (by tohenk).
I followed the instruction for TWRP-Installation and the one for CM12.1 by tohenk.
Doing so, I installed TWRP via Odin 3.09 (successful).
To root the T310, I had to install the zip "ROOT_SGT3_8.0.zip". (also successful)
Reentering TWRP to flash the CM12.1-zip, I selected the file from internal SD-Card, getting a warning that the file shall not be compatible - having had the same with the root-zip, i swiped to install.
Resulting in the error (got a screenshot, but can't link it - to few posts):
"Can't install this package on top of incompatible data. Please try another package or run a factory reset.
E: Error executing updater binary in zip '/sdcard/fw/cm-12.1-20151018-UNOFFICIAL-lt01wifi.zip'
Error flashing zip '/sdcard/fw/cm-12.1-20151018-UNOFFICIAL-lt01wifi.zip"
... as offered by TWRP, i reset the Dalvik-Cache, rebooted. All Apps have been reinitialized, rebooted again into TWRP, getting the same Error.
So I installed philz_touch_6.08.9-lt01wifi.zip - but getting the same Error...
At the moment, I'm stucked with rooted StockROM...
..what did I miss?
(thanks for any help)
- - - - - - -
Edit:
Found the error:
prepareing the Flash-Procedure, I did a "factory reset" from within StockROM-Settings.
After performing a Factory-Reset out of PhilzTouch and wiping Dalvik-Cache (without rebooting the GT3 after Wiping), I was capable to install the CM12.1-zip, which runs perfectly fine now...
(somewhere it should be mentioned "do the factory reset from recovery, not from within ROM"
tohenk: you did a wonderful Job on the CM12.1-ROM! Thank you!!
I'm having the same issue.... so I installed Philz_touch_6.19.3 but I still can't flash any of the ROM's for T310...
Do you have any suggestions?
My tablet start up to SAMSUNG TAB 3 logo and stuck there...
I have an international htc one x.
I have recently rooted the device using WinDroid Universal Android Toolkit and twrp 2.8.0.0 is my recovery.
I have tried installing crDroid costume ROM serval times, and each time i got a "error executing updater binary in zip" error". I decided I will try resurrection remix instead, and then there was a link in the failure messege to a google doc with explanation about new/old storage layout.
I found this http://forum.xda-developers.com/htc-one-x/orig-development/storage-layout-hox-endeavoru-t3022358 wonderful tutorial about the storage layout.
In the last few times I tried installing a ROM, I luckily backed up my phone before formatting it (and wiping Dalvik-system-data-cache) so I had an insurance my phone won't become a fancy brick. However, in in order to change the layout I need to erase *everyting* from the device, and I am pretty sure it will delete the back up.
I am afraid to try this super-detailed tutorial and end up with a useless brick. I repeat: I never ever successfully installed a ROM.
Should I give it a try? Is the error executing updater binary in zip related to the storage layout?
Hello,
i just unlocked bootloader and installed twrp and it all went fine..
until i wanted to fully wipe my device, i did this via twrp.
after 20Minuts, nothing happend, the bar was still white and gray (not even a little bit blue)
and it kept stuck on ''twrp formatting data using make_ext4fs function''.
i knew this wasn't a good idea, but i decided to turn off my phone,
and now, everytime when i turn it on on the normal way it just redirrects me to TeamWin in a bootloop.
even if i want to go to recovery mode i keep stuck in that bootloop, so there is nothing i can do right now, i only can stick at Fastboot Mode but nothing else,
Is there any way to fix this problem?
Using ASUS ZENFONE 2 551ML
I hope you did a backup of your system before? Otherwise just download the latest full image:
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE551ML/UL-Z00A-WW-2.20.40.174-user.zip
place it on your internal sdcard (via adb push) and then flash it normally with TWRP. Please note that the procedure can take up to 30 minutes, where the formatting is the procedure taking the longest time...
TheSSJ said:
I hope you did a backup of your system before? Otherwise just download the latest full image:
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE551ML/UL-Z00A-WW-2.20.40.174-user.zip
place it on your internal sdcard (via adb push) and then flash it normally with TWRP. Please note that the procedure can take up to 30 minutes, where the formatting is the procedure taking the longest time...
Click to expand...
Click to collapse
How to he flash stock rom by twrp?
Download and flash this via twrp http://forum.xda-developers.com/zenfone2/development/stock-rom-ul-z00a-ww-2-20-40-168-t3354526
Make sure you flash Supersu before you flash the rom.
mr_gourav2000 said:
How to he flash stock rom by twrp?
Click to expand...
Click to collapse
It's all written there...adb push on the phone, flash the zip normally via twrp, wait and done
TheSSJ said:
It's all written there...adb push on the phone, flash the zip normally via twrp, wait and done
Click to expand...
Click to collapse
but i cant use twrp on my phone because its stuck in bootloop, or what do you mean? (english not my main language)
please give me some proper step by step instructions, i would really apreciate that!
thanks anyway your awesome!
Man, I misread your post, sorry...I thought you could boot only into twrp
If you still have fastboot, why not flashing twrp 2.8.x.x?
Code:
Fastboot flash recovery nameofrecovery.img
Fastboot reboot recovery
Otherwise you could flash stock system with this guide: http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256
It's a lot to read
wow, that is something really helpfull, there is still hope to revive my phone
i'll let you know how it turnt out xd
thanks alot!!
i fixed recovery mode, so thats already one step further. Oefff @TheSSJ thanks for the help.
But now i get some other problems, when i try to wipe my phone i get the error like ''unable to mount /data'' and ''unable to wipe dalvik''
and all other kinds of these errors, i get the same problem when i was installing rom. isn't there anything or a way to fully wipe all this **** so i can install a fresh rom.
i flashed custom rom and this is error log i get. its all full written down.
E: could not mount /data and unable to find crypto footer.
E: unable to mount /data
E: unable to recreate /data/media folder.
updating partition details...
E: unable to mount /data
... done
E: unable to mount storage.
E: unable to mount /data/media during GUI startup
Full SELinux support is present.
E: unable to mount /data/media/twrp. twrps when trying to read settings file.
E:unable to mount /data
MTP enabled
E: unable to mount /data
E: unable to mount /data
E: unable to mount /data
Installing external_sd/UL-Z00A-WW-2.20.40.174-user.zip ...
Checking for MD5 file...
Skipping MD5 check: no MD5 File found
Device image SKU:
OTA image SKU: WW
assert failed: getprop ("ro.build.asus.sku") == ''WW''
E: Error executing updater binary in zip '/external_sd_UL-Z00A-WW-2.20.40.174-user.zip'
Error flashing zip '/external_sd_UL-Z00A-WW-2.20.40.174-user.zip'
Updating Partition Details...
E:unable to mount /data
... done
E: unable to mount storage.
Failed
Seems you don't have a WW image installed, do you have a CN Software? Then you need another Software of course
what do you mean with ww & cn software?
sorry but im new in this.. but im really interested so can you please explain a little bit?
how can i get this other software! thanks!!!
Where did you buy your Phone? what does the packaging state? WW, CN, TW, etc? These 2 letters must be written in uppercase somewhere, then we will know which software to flash, there is a check where your phone's software is compared to the zip you are trying to flash:
assert failed: getprop ("ro.build.asus.sku") == ''WW''
Which TWRP did you flash?
ohhh yes, i do have CN software Probably, as it is buyed from china.
Where can i find this other type software?
thanks!
colldor200 said:
ohhh yes, i do have CN software Probably, as it is buyed from china.
Where can i find this other type software?
thanks!
Click to expand...
Click to collapse
There you go: http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE551ML/UL-Z00A-CN-2.20.40.159-user.zip
I think flashing will still fail though...but pls try first,maybe it'll work
i tryed it, i get the same error :/
Update: i changed from CN to WW.
Because of this i reflashed to twrp 3.0 and it works properly and now wiping shows no problem anymore.
I also got the WW ota zip but dont know how to install that.
Anyway, i tryed to install xaosp rom (even if my ota is still CN)
And it showed no problems at all!
BUT when i tryed to startup my phone it sticks with the asus logo and wont go any further, not a bootloop, it just sticks at the asus logo.
We are Always getting more and more steps further into fixing my phone, thanks for that @TheSSJ were almost there ?
colldor200 said:
Update: i changed from CN to WW.
Because of this i reflashed to twrp 3.0 and it works properly and now wiping shows no problem anymore.
I also got the WW ota zip but dont know how to install that.
Anyway, i tryed to install xaosp rom (even if my ota is still CN)
And it showed no problems at all!
BUT when i tryed to startup my phone it sticks with the asus logo and wont go any further, not a bootloop, it just sticks at the asus logo.
We are Always getting more and more steps further into fixing my phone, thanks for that @TheSSJ were almost there
Click to expand...
Click to collapse
You could try flashing cm13 first and then xosp:
First wipe data/cache
Then flash cm13
Boot up and hope that it works
Reboot to recovery
Wipe data/cache
Flash xosp and maybe a kernel that fits (FlareM?)
Boot to system again
You could try flashing cm13 first and then xosp:
First wipe data/cache
Then flash cm13
Boot up and hope that it works
Reboot to recovery
Wipe data/cache
Flash xosp and maybe a kernel that fits (FlareM?)
Boot to system again
Click to expand...
Click to collapse
sorry for the kinda late answer, but yes i followed your instructions, and it works completely, after cm13 i also immediately installed gapps.
i skipped xaosp im fine with cm13
Thanks alot @TheSSJ for all the help my phone is fully fixed now and even working faster then before its like super fast.
thanks again your great!
Hello I have a problem with the files on my device and it is that when trying to install a ROM using TWRP I get that it has failed and a lot of messages saying:
"Error opening: ยด/data/user_de/0/" (Here it puts rare names of symbols and letters) operation not permitted
I already tried to mount the data folder from the recovery and I also tried to install the ROM from ADB commands but it is not possible, this is not the first time that I installed a ROM since I had Pixel Experence and when installing it it did not show me any error and now the Device does not start as it has no ROM and when it turns on it opens the TWRP.
someone could help me with that please.
I'm having problems with TWRP and OrangeFox, permission errors all the time
I'm facing some permissions problems and thus being unable to install Paranoid Android Q5. I was using MIUI 12 (Xiaomi.EU). The steps I took to change the ROM: Formated data (errors started right away) then I did the usual wipes (cache, dalvik...
forum.xda-developers.com