actually I was changing my boot animation of lenovo zuk z2 plus so I download an image file from XDA for my phone after installing animation changes but when I boot Into recovery like I do usually by pressing volume button it now takes me to fastboot modewhere I again have to use volume buttons to boot to recovery similar to usual after selecting recovery mode when I press power button it keeps on the same page after restarting and same happening again and again after I click to start it now goes to normal startup page where my device boot like normal I just want to get rid of that fastboot mode so that my device can be boot to twrp what should I do plz help tell me all possible ways so that I can solve
Or enter in recovery mode
Related
After rooting my phone and trying to flash TWRP recovery, my phone is now stuck in a boot loop - Htc Logo.
I tried holding down volume down and power button but it does not enter recovery - continues loop.
I tried volum up and power and all 3 buttons pushed as well but stays in bootloop.
I think i might have erased the stock recovery that was on there..
What can i do to fix this?
Please help me as soon as possible
Tighten two volume buttons and the power button when you see a black screen and holding down the volume- and power button that would go to zagruzchik.Telefon must be connected to kompyuteru.Esli got to go to the boot loader, boot into download sistemu.Esli not work then you have forgiven stock rekaveri of loader. https://yadi.sk/d/nWnRAChBnEtxG
vuk1963 said:
Tighten two volume buttons and the power button when you see a black screen and holding down the volume- and power button that would go to zagruzchik.Telefon must be connected to kompyuteru.Esli got to go to the boot loader, boot into download sistemu.Esli not work then you have forgiven stock rekaveri of loader. https://yadi.sk/d/nWnRAChBnEtxG
Click to expand...
Click to collapse
Hi... Thanks for the reply... I tried again but it is still in boot loop - it does not go into boot loader...
Any suggestions please help me
flash stock through TVRP rekaveri. 1. Wipe-advanced Wipe - note 5 crosses (micro SD card is not necessary) Swipe to wipe 2 flаsh stock rom 5.0.2 https://yadi.sk/d/nWnRAChBnEtxG 3. Follow the advice of 1 (Tighten two volume buttons and the power button when you see a black screen and holding down the volume- and power button that would go to zagruzchik.Telefon must be connected to kompyuteru.Esli got to go to the boot loader)
I tried to root my phone and followed all steps until it asked to boot into the custom recovery and that only displayed a blackscreen and if I tap on the screen the phone vibrated. I cannot boot into bootloader as the phone just automatically tries to enter recovery with blackscreen.
Hold all buttons the phone boots normally and can use the phone as usual.
I've tried to use the adb and fastboot cmds to restore and factory reset but just reboots and tries to enter recovery with the blackscreen.
My device is htc_a51ul if that helps.
Thanks,
Phatzy
Tighten two volume buttons and the power button when you see a black screen and holding down the volume- and power button that would go to zagruzchik.Telefon must be connected to kompyuteru.Esli got to go to the boot loader, boot into download sistemu.Esli not work then you have forgiven stock rekaveri of loader. https://yadi.sk/d/nWnRAChBnEtxG
I think you have flashed a wrong recovery ,first thing to do now is flash stock recovery and whether if it is working fine if so then flash the proper version of twrp 2.8.7.0 is recommended and see if it works
I had the same issue when I first flashed twrp on lollipop but then I did the above and now everything is fine.
while its on the blackscreen only adb commands work. If i try fastboot commands its just waiting for device and phone dont respond. I cannot get into bootloader at all with volume keys or with adb command.
Many thanks for suggestions.
Ok I have now managed to get bootloader back and I can now enter the stock recovery but when I enter recovery it has a red triangle. Is there anyway to remove this?
Thanks.
Its very complicated. My T705's power button was damaged by water. And i flashed Stock MM rom with odin. It was fine after flashing, the tablet boot into the os properly, work very well in the os.
But then i want to wipe the cache and data after that, so i was using the code"adb reboot to recovery" to get into recovery mode because my power button was broken. (I thought it can be using home button to select in recovery mode)
But the nightmare is i can't select anything in recovery mode which requiring a power button. So i can't wipe the cache, also can't select the option to reboot my tablet...... I've tried to hold both the volume down and home key to go to the download mode menu, and select restart by holding volume down, but it go to recovery again even after removing the battery, i think it's because the adb command.
And the strangest thing is i can't use my volume up button in download mode menu, so sadly i can't flash the rom again,:crying: but the volume up is working well in recovery and in the os......
Is there anyway to prevent the tablet to boot into the recovery again? I'm quite sure it's not the problem when flashing MM rom, the problem should be the adb command makes my tablet boot into recovery until i change the boot setting in recovery mode.
hungpakto said:
Its very complicated. My T705's power button was damaged by water. And i flashed Stock MM rom with odin. It was fine after flashing, the tablet boot into the os properly, work very well in the os.
But then i want to wipe the cache and data after that, so i was using the code"adb reboot to recovery" to get into recovery mode because my power button was broken. (I thought it can be using home button to select in recovery mode)
But the nightmare is i can't select anything in recovery mode which requiring a power button. So i can't wipe the cache, also can't select the option to reboot my tablet...... I've tried to hold both the volume down and home key to go to the download mode menu, and select restart by holding volume down, but it go to recovery again even after removing the battery, i think it's because the adb command.
And the strangest thing is i can't use my volume up button in download mode menu, so sadly i can't flash the rom again,:crying: but the volume up is working well in recovery and in the os......
Is there anyway to prevent the tablet to boot into the recovery again? I'm quite sure it's not the problem when flashing MM rom, the problem should be the adb command makes my tablet boot into recovery until i change the boot setting in recovery mode.
Click to expand...
Click to collapse
Install twrp, you won't need a power button then.
ashyx said:
Install twrp, you won't need a power button then.
Click to expand...
Click to collapse
How to install when this tablet can't do anything now..
Can't select anything now, can't go into the os and use adb to boot into download mode
hungpakto said:
How to install when this tablet can't do anything now..
Can't select anything now, can't go into the os and use adb to boot into download mode
Click to expand...
Click to collapse
If your power button doesn't work how do you turn the device on after removing the battery?
unified android toolkit has a reboot device option...
mordeith said:
unified android toolkit has a reboot device option...
Click to expand...
Click to collapse
That would only work if you could actually use adb.
ashyx said:
That would only work if you could actually use adb.
Click to expand...
Click to collapse
probably would help,if i read all the posts before commentijng...but ive used it on random devices to reboot it..not soleley from adb
ashyx said:
If your power button doesn't work how do you turn the device on after removing the battery?
Click to expand...
Click to collapse
Holding vol down + home key can boot to the download mode menu.
But the device will automatically turn on after inserting the battery, no need to press any button, but the device only boot into recovery after i use the adb boot into recovery command.
hungpakto said:
Holding vol down + home key can boot to the download mode menu.
But the device will automatically turn on after inserting the battery, no need to press any button, but the device only boot into recovery after i use the adb boot into recovery command.
Click to expand...
Click to collapse
If that's the case that means the power button is stuck on or you wouldn't be able to power on or boot to Download mode.
All you need to do is flash the stock firmware or twrp and it will reboot back to the OS.
Hopefully I've got your fix:
When you insert the battery your device boots up, if so, insert the battery and press the correct key combo while the splash screen from logo.bin is showing to boot into the download mode.
After that flash TWRP latest version with Odin. Then when your phone again boots to recovery, chose Reboot -> System to boot Android.
---
If the above isn't applicable and you can start Android somehow, I will download either FlashFire or MobileOdin to flash another recovery/ROM.
Sent using Tapatalk
ashyx said:
If that's the case that means the power button is stuck on or you wouldn't be able to power on or boot to Download mode.
All you need to do is flash the stock firmware or twrp and it will reboot back to the OS.
Click to expand...
Click to collapse
And don't know why the volume up doesn't work in the download mode menu, stuck in the download mode menu and can't select the option "continue" to go into the download mode
hungpakto said:
Holding vol down + home key can boot to the download mode menu.
But the device will automatically turn on after inserting the battery, no need to press any button, but the device only boot into recovery after i use the adb boot into recovery command.
Click to expand...
Click to collapse
lot of problems can be fixed by samsung k300 tool ,disconect phone and start that tool and connect phone again and let the tool find the phone ,if found just click that icon and phone go to download mode and you can flash back stock firmware...that tool dont need adb enable just working usb cable ,i say working cant be fake...
Hi guys,
I have a nexus 7 2013 which boot loop (or any watchdog restart ?).
If I try to normal start this one, I will get the Google logo for few seconds, then it will restart on its own.
If i press the volume down during this process, I can boot to bootloader, but same way, after few second, device will restart.
Any clue on what can be wrong ?
Thanks
Nico_FR said:
Hi guys,
I have a nexus 7 2013 which boot loop (or any watchdog restart ?).
If I try to normal start this one, I will get the Google logo for few seconds, then it will restart on its own.
If i press the volume down during this process, I can boot to bootloader, but same way, after few second, device will restart.
Click to expand...
Click to collapse
Hello, connect external power and try again. If it works now, you will have to replace the battery.
If it does not work with external power and it can not stop in bootloader/fastboot mode, then the hardware is faulty or the bootloader is corrupt.
External power does not change anything. Still boot loop, so really should be a hardware issue.
If I keep volume up key pressed, it boots, but almost unusable if I have to continuously press the volume up key.
Same when in bootloader: if I continuously press the volume up key, it does not reboot.
I've tried to erase everything with fastboot, but cannot do most of the operation. When trying to format data, it says that partition does not exists (it exists, as it can boot !)
Bootloader is locked, so cannot go with TWRP for example, as I cannot validate the on screen confirmation needed to oem unlock.
Do you know any way to unlock bootloader without use of onscreen confirmation ?
I don't know if that would help, but when I was installing Lineage OS and updated TWRP, I also boot looped once on recovery (recovery itself was boot-looping), and re-downloading (from another browser) and re-installing recovery at fastboot mode fixed my issue.
I cannot unlock the bootloader because of this issue, so cannot flash anything
Could be broken power button, if it is stuck and pressing it continuously.
Are you able to reach your recovery to factory reset?
I mean can you reach it from the bootloader menu?
If not you could try to put twrp.img or recovery.img into your PC adb&fastboot folder and try
fastboot boot twrp.img
or
fastboot boot recovery.img
Don't know if this works with locked bl
Edit: may type
fastboot getvar all
and post your result, hide your imei if you got one
I was on cm-13.0-20161205-NIGHTLY-Z00A
and I have upgrade bootloader before flash cm13
Now ,
I was trying to flash CleanSTOCK-MM-v3.4+ZenKernel-Z00A
wiping everyting (system-data-internal stograge..)
and flashing from SD card
after falshing phone going to have loop of restart on asus screen
and sometime it automaticlly going to twpr
if i reflash cm-13.0-20161205-NIGHTLY-Z00A it works!!!
i can go to twpr and bootloader
What should I do to flash cleanstock??
download the file from the link below. extract it and run "Run_Tool.bat" . put phone in fastboot mode. now select option to flash mm boot loader. after finish the process. boot into recovery mode and sideload latest MM from asus website.
https://drive.google.com/open?id=0B72QQTXqZSRwN3lOTzFmRVJPbjA
Note you may see an error while entering recovery mode 'android logo with error sign'. if you see that press and hold power button immediately click volume plus button then release power button you will enter recovery