Hi everyone I have some questions if here in the forum we can solve them together
Without offending or underestimating the work of forum members and the people I have quoted, I only try to find solutions
I have the Chinese version of the Motorola Z2 Play Model XT1710-11, so I wanted to remove the default firmware with ZUI!. by 7.1.1_NZS26.71-36
First try Unlocking the bootloader to work clean following the steps of many sites who recommend working with the unlocked bootloader But unfortunately when I tried to unlock it, it told me a message "BAD KEY", Look for this type of problems in the forum and other sites, according to the problem is because the supplier who I buy it in China, should give me the key, since it is likely that the seller has changed it. Unfortunately the seller does not answer me and I do not think he does.
1. So the first question is: Is it possible to do the flash even if you have this kind of problem?
First I use this command as the flash comes, blocked from the factory by the supplier:
fastboot flashing unlock
Click to expand...
Click to collapse
First of all make a backup of the firmware, and all the elements with the TWRP here: https://forum.xda-developers.com/z2-play/development/twrp-3-2-0-0-moto-z2-play-albus-t3715660
Thanks to @Junior Passos , for his post, who helped me to do it, and in case someone has this phone model with the same "BAD KEY" problem. and be afraid of damaging it, it was tested and it worked normally.
The first problem in my head was that I did not like the operating system that brought by default my Z2-XT1710-11, because even if it was in Spanish or English there were places in the Chinese system
So, what I wanted was a clean and operable nougat.
I started looking for this exact model on the Internet and in the forum, I did not find a specific topic of this model, but in the comments of someone who had it, its name is: @LunaTheLuminous Who had a problem with their modems, https://forum.xda-developers.com/z2-play/help/fastboot-xt1710-11-china-mobile-modem-t3801969.
I did not have a modem problem because I had done backup, but I wanted to try to get to a clean rom and try to flash with comments from @KirMit from here: https://forum.xda-developers.com/showpost.php?p=76813587&postcount=3. Unfortunately there were not the exact commands that he use, for avoid some kind of brick in my device.
Then I continued looking for the same model, and I found something similar that I decided to try : https://forum.xda-developers.com/z2-play/development/moto-z2-play-stock-retail-xt710-07-t3669668. The original idea is to try to get a clean Nougat, According to @KirMit he managed to get a Clean nougat by using Two ROM, which I do not know From Here: https://forum.xda-developers.com/showpost.php?p=74833568&postcount=17.
I tried to find a clearer solution, because I had doubts about the exact commands that I use and roms, below in the comments, KirMit explains: that "the best manual is in the post" . I decided to use the @lexie90 tutorial https://forum.xda-developers.com/z2-play/development/moto-z2-play-stock-retail-xt710-07-t3669668 Thanks with this ROM: "ALBUS_NPSS26.118-19-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml"
and These commands:
fastboot oem lock begin
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash modem NON-HLOS.bin I DID NOT USE IT
fastboot erase modemst1 I DID NOT USE IT
fastboot erase modemst2 I DID NOT USE IT
fastboot flash fsg fsg.mbn I DID NOT USE IT
fastboot erase cache
fastboot erase userdata
fastboot oem lock
fastboot reboot
Click to expand...
Click to collapse
NOTE: The commands that are In red do not use them, I put them to see, the commands that I use and the ones that you do not have to use
Here I found a problem, because the bootloader has "BAD KEY" I can not close the OEM LOCK, and in the stage of flash recovery and flash boot it showed this message:
"Image signed with key bad key"
Click to expand...
Click to collapse
The flash of the firmware was made, I could go to the Nougat, Stock Running the modem, fingerprint reader, but when I turned on the phone I got a "bad key error message", looking for this type of problem is that the "logo.bin" file was necessary flash it, Unfortunately I could not find the original, but in the forum there are several people who have made their own logo.bin as: https://forum.xda-developers.com/moto-z/themes/logo-bin-to-remove-unlocked-warning-n-t3757030, and https://forum.xda-developers.com/moto-z-play/themes/logo-bin-t3538153 Thanks to @TobiPeter and @flashallthetime .
But when trying to flash it, and since they were from z play, the screen did not look good, therefore after several tests to eliminate this message:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
To delete the message, from the motorola z2 play MODEL: XT1710-11, I did a flash with the logo that I made in the backup of the twrp.
https://drive.google.com/open?id=1OjPxy5k02MrH73SXZoXjI1sZCp83uFAr
With this command:
fastboot flash logo logo.emmc.win
Click to expand...
Click to collapse
2. My question is is there any way to make a flash clean and to install normal without any error with this type of BAD KEY problem?
But I did not just try that Rom, try several Stock Roms which I present to you in this list:
ALBUS_NPSS26.118-19-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
ALBUS_RETAIL_7.1.1_NPSS26.118-19-18_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
ALBUS_NPSS26.118-19-1-6_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
CHINESE VERSION XT1710-08
XT1710-08_ALBUS_RETCN_7.1.1_NZS26.71-36_cid11_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
XT1710-08_ALBUS_RETCN_7.1.1_NZS26.71-97-41-9_cid11_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
Click to expand...
Click to collapse
Also try to change the command to try to see if there was the error, and use these: https://forum.xda-developers.com/z2-play/how-to/close-bootloader-lineageos-losing-imei-t3769479, Thanks to @Kacike27 , Always avoiding:
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
Click to expand...
Click to collapse
In the ROM of China I decided to make a full flash using all the commands, as @KirMit said in one of his comments.
https://forum.xda-developers.com/showpost.php?p=76813587&postcount=3
Hi. Use this https://mirrors.lolinet.com/firmware...LT_CFC.xml.zip
I flashed all using standard set of fastboot commands including modem flashing and erasing. You will boot in Chinese version, but still able to change a language to English in preferences menu (try to find a right menu by logos). It is still Android Nougat 7.1.1 with CH/EN only languages.
After that I flashed this https://mirrors.lolinet.com/firmware...LT_CFC.xml.zip
But skip modem flashing and erasing. You will have multi language Android Oreo.
Enjoy.
Click to expand...
Click to collapse
Unfortunately I did not succeed the result was the same "bad key" errors and commands ("Image signed with key bad key", FAILED) Etc.
But as you will understand, I was not satisfied with the fact of all these mistakes, which were presented to me along the way, so I decided to do an update to OREO of both version ZUI!!!, and Stock of rom 7.1.1 ALBUS_NPSS26.118-19-4.
Then I followed the instructions in this post by @HTCDevil https://forum.xda-developers.com/z2-play/how-to/fastboot-rom-oreo-retail-via-fastboot-t3786153 Thanks!!!
I followed the following commands:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin I DID NOT USE IT
fastboot flash fsg fsg.mbn I DID NOT USE IT
fastboot erase modemst1 I DID NOT USE IT
fastboot erase modemst2 I DID NOT USE IT
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash oem oem.img
fastboot erase carrier
fastboot erase DDR
fastboot oem fb_mode_clear
Click to expand...
Click to collapse
Following the advice of KirMit, I do not use the commands that are in red
By @KirMit
I confirm, that all is working after update on XT1710-11 (China Mobile), BUT! do not flash all - skip:
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
If you want your modems and fingerprint sensor are still working!
Click to expand...
Click to collapse
The process that I did for fastboot, it did not work for me, unfortunately the same mistakes appeared in the previous roms, I have to add that when updating to Oreo, in both versions, ZUI and 7.1.1 (Stock ALBUS_NPSS26.118-19-4.), the fingerprint reader stopped working.
The device, started to "encrypt", when I wanted to downgrade to 7.1.1 ALBUS_NPSS26.118-19-4 or ZUI!!. In the command stage:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
Click to expand...
Click to collapse
The commands were throwing error, (failed), now the question is:
3.It is possible that I can not flash the Bootloader, nor do the gpt partition, because the device is encrypted or has the oreo bootloader
?
To finish I try to flash with RSD Lite, without any result, due to the error when it goes in :"fastboot flash partition gpt.bin", it can not execute the flash in the gpt, it stays stuck in that stage.
The testing of RSD lite was with the help of the following post:
https://forum.xda-developers.com/showpost.php?p=76454434&postcount=29 by @St.Nogiel
https://forum.xda-developers.com/moto-z-play/how-to/mini-guide-bricked-special-case-attempt-t3812530 by @KrisM22
https://forum.xda-developers.com/moto-z-play/how-to/addison-factory-stock-images-t3736767/post75236696#post75236696 by @KrisM22
https://forum.xda-developers.com/moto-z-play/how-to/guide-rsd-lite-mini-guide-t3740641#post75334194 by @KrisM22
Click to expand...
Click to collapse
end of the tests,
sorry for my English. greetings friends
I got a z2 play in secondhand.
This phone is from china mobile and the previous owner has flashed 7.1.1 .
Now the phone is stuck in 7.1.1 and it does not get get updated to 9.0.
Is there any way this can be done.
I contacted Lenovo and they say that the build number is not in the database .
Related
There isn't much on restoring this device at all. I'm really disappointed. I had high hopes. Anyway, the root situation is a mess, and after looking on here, I couldn't find a single set of instructions for properly flashing root. After digging around for a couple of hours, the only instructions I can find to revert to stock is:
1) Extract folder on PC.
2) Hold POWER and VOL DOWN on the phone to access the fastboot mode. Try to release the power button first before the VOL DOWN in case you trigger the system boot accidentally.
3) Connect USB cable to PC.
4) Flash in the following order:
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash oem oem.img
Complete restore
WARNING: May wipe device, and has not been personally tested.
Before flashing the above, flash these first:
Code:
fastboot flash gpt.bin partition
fastboot flash bootloader.img bootloader
fastboot flash NON-HLOS.bin modem
fastboot flash fsg.bin fsg
fastboot flash adspso.bin dsp
fastboot flash logo.bin logo
BUT I cannot get this to work because I keep getting a "Image not signed or corrupt" error. I've confirmed I have the US retail single sim version (Addison).
I also cannot find a working version of RSD Lite that detects my phone. I've tried version 6.2.4.
Would anyone be able to help? I'd really appreciate it. I can get the bootloader up, but I cannot do anything else.
I used the procedure here and it worked for me.
https://giveawaytricks.in/install-stock-rom-moto-z-play/
Also if RSD isnt detecting your phone, ADB might not either.
uberano26 said:
I used the procedure here and it worked for me.
https://giveawaytricks.in/install-stock-rom-moto-z-play/
Also if RSD isnt detecting your phone, ADB might not either.
Click to expand...
Click to collapse
I appreciate the reply. RSD doesn't detect, but ADB can. I can send fastboot commands via the bootloader, so I think drivers are OK. What got me in this mess was flashing the Chinese TWRP posted on the root guide here on XDA so I think the drivers are installed ok. I think it's a Windows thing.
I found that page you're referring to last night and read up on it. I found the retail US stock firmware image posted by another here on XDA and proceeded to go through the steps. After looking, the batch file immediately closed and did nothing. Then I went into the XML file and removed the m in mfastboot. After runnng manually, I found that it kept saying mfastboot.exe is not found. Then it went through every step as I've seen before, but every time a command was finished it would say "Image not signed or corrupt". I believe if I could somehow get RSD lite to work that I would be OK. I'd love to get this thing booting again.
uberano26 said:
I used the procedure here and it worked for me.
https://giveawaytricks.in/install-stock-rom-moto-z-play/
Also if RSD isnt detecting your phone, ADB might not either.
Click to expand...
Click to collapse
OK, I found mfastboot.exe located here (http://forum.xda-developers.com/gen...ng-mfastboot-exe-to-unbrick-motorola-t3203518) and had NO idea there was such a thing as mfastboot !
Unfortunately when running this, on all of these lines of mfastboot:
mfastboot flash gpt.bin partition
mfastboot flash bootloader.img bootloader
mfastoot flash NON-HLOS.bin modem
mfastboot flash fsg.bin fsg
mfastboot flash adspso.bin dsp
mfastboot flash logo.bin logo
I get "Image not signed or corrupt"
When I flash all of these, they go through OK:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash oem oem.img
So I'm hoping this helps someone figure out what I'm doing wrong. Again, I'm just trying to get back to stock.
- You are restoring the firmware without wiping the device, i'd try fastboot erase userdata first before flashing the rest, could be worth a try.
- I get "Image not signed or corrupt" when flashing a modified kernel too, but it is flashed regardless.
- I got root with the chinese twrp, the others gave me bootloop.
Good luck.
I too have a freshly-bricked EU dual-SIM Z Play that gives "Image not signed or corrupt" errors when I try to flash recovery and boot. Seen by fastboot, but not by RSD.
edit: more of my saga is here http://forum.xda-developers.com/moto-z-play/help/identifying-firmware-required-phone-t3517360/
yeahhh, i manage to flash my moto z play back to stock, the rom was bad or something i downloaded from here.
https://mirrors.lolinet.com/firmware/moto/addison/official/RETLA/
so happy
joesee said:
There isn't much on restoring this device at all. I'm really disappointed. I had high hopes. Anyway, the root situation is a mess, and after looking on here, I couldn't find a single set of instructions for properly flashing root. After digging around for a couple of hours, the only instructions I can find to revert to stock is:
1) Extract folder on PC.
2) Hold POWER and VOL DOWN on the phone to access the fastboot mode. Try to release the power button first before the VOL DOWN in case you trigger the system boot accidentally.
3) Connect USB cable to PC.
4) Flash in the following order:
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash oem oem.img
Complete restore
WARNING: May wipe device, and has not been personally tested.
Before flashing the above, flash these first:
Code:
fastboot flash gpt.bin partition
fastboot flash bootloader.img bootloader
fastboot flash NON-HLOS.bin modem
fastboot flash fsg.bin fsg
fastboot flash adspso.bin dsp
fastboot flash logo.bin logo
BUT I cannot get this to work because I keep getting a "Image not signed or corrupt" error. I've confirmed I have the US retail single sim version (Addison).
I also cannot find a working version of RSD Lite that detects my phone. I've tried version 6.2.4.
Would anyone be able to help? I'd really appreciate it. I can get the bootloader up, but I cannot do anything else.
Click to expand...
Click to collapse
joesee said:
OK, I found mfastboot.exe located here (http://forum.xda-developers.com/gen...g-mfastboot-exe-to-unbrick-motorola-t3203518) and had NO idea there was such a thing as mfastboot !
Unfortunately when running this, on all of these lines of mfastboot:
mfastboot flash gpt.bin partition
mfastboot flash bootloader.img bootloader
mfastoot flash NON-HLOS.bin modem
mfastboot flash fsg.bin fsg
mfastboot flash adspso.bin dsp
mfastboot flash logo.bin logo
I get "Image not signed or corrupt"
When I flash all of these, they go through OK:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash oem oem.img
So I'm hoping this helps someone figure out what I'm doing wrong. Again, I'm just trying to get back to stock.
Click to expand...
Click to collapse
The commands that aren't working aren't being given correctly. Should be like this:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.bin
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
Milly7 said:
The commands that aren't working aren't being given correctly. Should be like this:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.bin
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
Click to expand...
Click to collapse
You just saved my phone. Can I buy you a beer or something?
theodric said:
You just saved my phone. Can I buy you a beer or something?
Click to expand...
Click to collapse
It's all good. Just helping out. Glad it helped.
joesee said:
There isn't much on restoring this device at all. I'm really disappointed. I had high hopes. Anyway, the root situation is a mess, and after looking on here, I couldn't find a single set of instructions for properly flashing root. After digging around for a couple of hours, the only instructions I can find to revert to stock is:
1) Extract folder on PC.
2) Hold POWER and VOL DOWN on the phone to access the fastboot mode. Try to release the power button first before the VOL DOWN in case you trigger the system boot accidentally.
3) Connect USB cable to PC.
4) Flash in the following order:
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash oem oem.img
Complete restore
WARNING: May wipe device, and has not been personally tested.
Before flashing the above, flash these first:
Code:
fastboot flash gpt.bin partition
fastboot flash bootloader.img bootloader
fastboot flash NON-HLOS.bin modem
fastboot flash fsg.bin fsg
fastboot flash adspso.bin dsp
fastboot flash logo.bin logo
BUT I cannot get this to work because I keep getting a "Image not signed or corrupt" error. I've confirmed I have the US retail single sim version (Addison).
I also cannot find a working version of RSD Lite that detects my phone. I've tried version 6.2.4.
Would anyone be able to help? I'd really appreciate it. I can get the bootloader up, but I cannot do anything else.
Click to expand...
Click to collapse
I had the complete restore section reversed when you saw it on my thread, someone pointed it out and it's been fixed now.
Edit: I see someone's done it here too.
You also don't need to restore fully, just do the restore for ota and it should be enough if you've not flashed over the other stuff.
well i forgot to boot and set up a pin before installing TWRP, soft bricked myself for hours, this thread helped me return to stock so i could set a pin so TWRP would work, THANK YOU!
also if anyone else ends up here, and is having trouble finding the US retail stock image, i used the one from https://mirrors.lolinet.com/firmware/moto/addison/official/RETUS/
Is that an official signed image?
Can i use it to relock bootloader?
Thanks!
dyonissos said:
Is that an official signed image?
Can i use it to relock bootloader?
Thanks!
Click to expand...
Click to collapse
None of the images are signed and won't relock the bootloader.
Would this allow me to return to Marshmallow after sideloading a Nougat OTA, given I unlock my bootloader? I flashed a build from a different region (I think retbr or something) onto my Canadian Z Play, but the build number doesn't match what everyone else is getting from. Just looking to revert to Marshmallow to perform a proper update instead of impatiently sideloading an OTA.
IncendiaryPyro said:
Would this allow me to return to Marshmallow after sideloading a Nougat OTA, given I unlock my bootloader? I flashed a build from a different region (I think retbr or something) onto my Canadian Z Play, but the build number doesn't match what everyone else is getting from. Just looking to revert to Marshmallow to perform a proper update instead of impatiently sideloading an OTA.
Click to expand...
Click to collapse
Yep if you have the right factory image for your device.
Leraeniesh said:
Yep if you have the right factory image for your device.
Click to expand...
Click to collapse
Thank you. I've never had issues doing stuff like this before, but for some reason it scares the hell out of me with this phone. Maybe because I haven't had it for very long, lol. Downgraded to Marshmallow successfully. Hopefully I don't run into any issues in the future that would require an RMA, but out of all the phones I've had over the years, I've only had to RMA a Nexus 5 due to a problem with the screen.
Hi everyone. Is this guide is okay for reteu dual sim? And please point me if there is a firmware for reteu nougat. I softbrick my device and my imei is 0. I want to restore it please guide me as i am a noob in fastboot commands and steps. Thanks in advance
Vitxlss said:
yeahhh, i manage to flash my moto z play back to stock, the rom was bad or something i downloaded from here.
https://mirrors.lolinet.com/firmware/moto/addison/official/RETLA/
so happy
Click to expand...
Click to collapse
do you have rooted device with twrp (maybe) ?
also, is the boot.img you got from Android 7 or 6.xx ?
Thanks
I use the DOWNGRADE script found here :
https://drive.google.com/file/d/0B134drJ4-Ed0MHQ5aE1wUmp5eFk/view
The original discussion here :
https://forum.xda-developers.com/moto-z-play/how-to/autoscript-install-firmware-downgrade-t3558118
Note that the original script is not ideal. The actual script came from @-=MoRpH=- on comment #4
A friend unlocked its bootloader and tried to root it with no success.
The phone works but only boots through fastboot, because when I press the power button it enters fastboot mode instead of booting.
I don't know what happened, as I was not the one who tried to root, so I just wanted to know how to revert back to stock and relock the bootloader, since the phone works normally.
freeZbies said:
A friend unlocked its bootloader and tried to root it with no success.
The phone works but only boots through fastboot, because when I press the power button it enters fastboot mode instead of booting.
I don't know what happened, as I was not the one who tried to root, so I just wanted to know how to revert back to stock and relock the bootloader, since the phone works normally.
Click to expand...
Click to collapse
If they flashed twrp and your phone can only be started normally through the bootloader see
https://forum.xda-developers.com/g5/how-to/fix-phone-reboots-recovery-mode-started-t3705325
If you want to root the phone stock can only be rooted with a system root
Most roots now use a systemless root which is not compatible with the stock kernel
You either need a custom rom to use the latest magisk root or if you want to stick with stock use an old version of magisk (can't remember which really old version works) or use supersu but flash the config zip first and set to system as default will be systemless
With regards to flashing stock download firmware and run these fastboot commands assuming you have fastboot set up on your pc
fastboot oem fb_mode_set
fastboot flash partition gpt.bin (do not flash unless you want to repartition the phone)
fastboot flash bootloader bootloader.img (do not flash unless you really need to replace the bootloader)
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize (ignore any error)
fastboot erase clogo (ignore any error)
fastboot oem fb_mode_clear
fastboot reboot
To lock the bootloader do the above and then go back to the bootloader mode & enter these fastboot commands
fastboot oem lock
fastboot oem lock (yes type it again)
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash boot boot.img
fastboot oem lock
Then once restarted refresh all the firmware again with the commands from earlier
I have seen though that some boot.img are not officially signed so it may not lock
TheFixItMan said:
If they flashed twrp and your phone can only be started normally through the bootloader see
https://forum.xda-developers.com/g5/how-to/fix-phone-reboots-recovery-mode-started-t3705325
If you want to root the phone stock can only be rooted with a system root
Most roots now use a systemless root which is not compatible with the stock kernel
You either need a custom rom to use the latest magisk root or if you want to stick with stock use an old version of magisk (can't remember which really old version works) or use supersu but flash the config zip first and set to system as default will be systemless
With regards to flashing stock download firmware and run these fastboot commands assuming you have fastboot set up on your pc
fastboot oem fb_mode_set
fastboot flash partition gpt.bin (do not flash unless you want to repartition the phone)
fastboot flash bootloader bootloader.img (do not flash unless you really need to replace the bootloader)
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize (ignore any error)
fastboot erase clogo (ignore any error)
fastboot oem fb_mode_clear
fastboot reboot
To lock the bootloader do the above and then go back to the bootloader mode & enter these fastboot commands
fastboot oem lock
fastboot oem lock (yes type it again)
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash boot boot.img
fastboot oem lock
Then once restarted refresh all the firmware again with the commands from the first post
I have seen though that some boot.img are not officially signed so it may not lock
Click to expand...
Click to collapse
Yes, thank you.
I was checking the relocking guides here in xda and seems signed boot images are the problem. Anyways, I'll check to see if it works.
freeZbies said:
Yes, thank you.
I was checking the relocking guides here in xda and seems signed boot images are the problem. Anyways, I'll check to see if it works.
Click to expand...
Click to collapse
Also just noticed you are talking about the Moto G5s - this is the Moto G5 Cedric forum
The Moto G5s forum is located
https://forum.xda-developers.com/moto-g5s
TheFixItMan said:
Also just noticed you are talking about the Moto G5s - this is the Moto G5 Cedric forum
The Moto G5s forum is located
https://forum.xda-developers.com/moto-g5s
Click to expand...
Click to collapse
Oh thanks, I'm gonna check it there, because it's indeed a Moto G5S.
Only thing I'd like to say is that on the XDA Labs app the only forum shown when I search for Moto G5S is the Moto G5 forum, no variants are presented, whom should I report this to, so that it can be fixed?
freeZbies said:
Oh thanks, I'm gonna check it there, because it's indeed a Moto G5S.
Only thing I'd like to say is that on the XDA Labs app the only forum shown when I search for Moto G5S is the Moto G5 forum, no variants are presented, whom should I report this to, so that it can be fixed?
Click to expand...
Click to collapse
No idea - don't use the app
The email on the Google play listing says
[email protected]
The thread for the app is
https://forum.xda-developers.com/android/apps-games/labs-t3241866
Hi, I used Carbon ROM on XT1670, when I wanted to change ROM I ran:
Code:
fastboot -w
And i got this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I also tried to remove them:
In TWRP I tried to do something but all I get is something similar to this:
Am I missing something? Thanks for your help.
I've been reading the question and answer forum, apparently it's a problem with the encryption.
I don't have the Moto G5 right now, I can try it in a couple of hours, what other solution could I have anyway?
In twrp go to wipe
Then press the option on the right to format data
Reboot to recovery
Note this is different from wipe data from the advanced wipe menu.
The fastboot command would be
fastboot erase userdata
TheFixItMan said:
In twrp go to wipe
Then press the option on the right to format data
Reboot to recovery
Note this is different from wipe data from the advanced wipe menu.
The fastboot command would be
fastboot erase userdata
Click to expand...
Click to collapse
Hello, good (and bad) news
I did and now I have MTP for TWRP.
But still CMD says "Bootloader is logical @@@ not found"
"@@@" is depending on what you are trying to flash, be it system or recovery.
I was also able to change the filesystem I did it for DATA / CACHE / SYSTEM I went from FAT and then to EXT4 again.
Insert a ROM and it flashed without problems but it starts again in fastboot, the same if I do it with ADB Sideload.
I also tried flashing Stock ROM, everything seems to be written without problem but with the first line of "Bootloader logical ... not found" and again start in fastboot.
It makes me believe that something is still encrypted.
I mean this.
I also tried
Code:
fastboot format:ext4 userdata
But I have this:
Bootloader is logical not found - this is normal output
Why are you trying to change formats? You are going to have issues especially with encryption. Use twrp to format not fastboot if you are messing with formatting but make sure you know what you are doing!
TheFixItMan said:
Bootloader is logical not found - this is normal output
Why are you trying to change formats? You are going to have issues especially with encryption. Use twrp to format not fastboot if you are messing with formatting but make sure you know what you are doing!
Click to expand...
Click to collapse
I flash a rom (no apparent problem, even Stock ROM) but it only boots to fastboot or the robot with an open belly.
What exactly should I do, I will follow step by step, I really need to get it back. Thank you very much for your help.
Hello again, I saw you in another post that apparently has the same problem as me, it is this:
Decryption unsuccessfull
Hi guys, I have a problem with my motorola moto g5. It turns out that I upgraded to android oreo and at the time of associating the fingerprint I asked for a pin for security which I put. En el twrp me pide el pin, el cual ingresa y ya podia...
forum.xda-developers.com
I have the same bugs, do you think I should run the command to decrypt?
Dislekzi4 said:
Ok, I'll get to the point.
I flash a rom (no apparent problem, even Stock ROM) but it only boots to fastboot or the robot with an open belly.
What exactly should I do, I will follow step by step, I really need to get it back. Thank you very much for your help.
Click to expand...
Click to collapse
In twrp format data
That is by selecting wipe
Then the option on the right to format data
Reboot to recovery
Everything should now be mountable
Make sure you are flashing stock rom correctly
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
fastboot reboot
Making sure you are flashing the same or newer firmware version than already on your phone
If your phone keeps booting to recovery (android with an open stomach or twrp) then do this
Boot into twrp then connect phone to PC and in cmd/terminal type
Code:
adb shell dd if=/dev/zero of=/dev/block/platform/soc/7824900.sdhci/by-name/misc
Reboot and your device will boot normally (assuming you have a working rom)
Hi, it work!
Thank you very much for your time and help, I am very grateful, for a moment I thought it was really a hardware problem.
I get device unauthorized. Please check the confirmation dialog on your device. and it won't let me do anything
Rod_Ems said:
I get device unauthorized. Please check the confirmation dialog on your device. and it won't let me do anything
Click to expand...
Click to collapse
Enable adb debugging on your device in dev options
Make sure you are using the latest platform tools
https://dl.google.com/android/repository/platform-tools-latest-windows.zip
Unzip
Navigate your cmd window to to the platform tools directory
In cmd type
adb devices
Look on your phone and a window will pop up asking you to confirm authorisation - tick the box to allow always if you want to
Then type
adb devices
And your device is authorised
TheFixItMan said:
In twrp format data
That is by selecting wipe
Then the option on the right to format data
Reboot to recovery
Everything should now be mountable
Make sure you are flashing stock rom correctly
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
fastboot reboot
Making sure you are flashing the same or newer firmware version than already on your phone
If your phone keeps booting to recovery (android with an open stomach or twrp) then do this
Boot into twrp then connect phone to PC and in cmd/terminal type
Code:
adb shell dd if=/dev/zero of=/dev/block/platform/soc/7824900.sdhci/by-name/misc
Reboot and your device will boot normally (assuming you have a working rom)
Click to expand...
Click to collapse
mine show the following error message: device '(null)' not found
danniel_sx said:
mine show the following error message: device '(null)' not found
Click to expand...
Click to collapse
Either
Your phone is not connected to pc
Faulty cable
You haven't installed Motorola USB drivers
You are using the wrong commands
If in fastboot mode type
fastboot devices
If in recovery mode type
adb devices
Your device should be listed if correctly connected
I found a solution, i'm argentinian so sorry if my english is bad
the fastboot menu of the combination power + volume down have no permissions to all modifications
You have to acces to the recovery fastboot menu, to do this, move to "recovery mode" enter here with power
Now if in the screen appears "No command" you have to press power + volume down for 3 sec and press vol up without press the another 2, then release the 3 buttons
Now go to "fastboot" in the recobery mode, and ta daaa. You have permissions
Recently i install pie 9.0 on z2 play, to try to fix the fingerprint scanner and gestures but still doesnt work, i was reading that is a problem from oreo, so i want to Downgrade to oreo to nougat, it's posible?
Anything below Pie is vulnerable to the X-helper rootkit... we were just talking about it in another thread. It's a real nasty little bugger.
But its posible? I just want to get all the features back, even, i dont know what is that thing, if they have some to hack me i dont have to much to lose anyways, just want to downgrate to fix the fingerprint bug from oreo
Don't know. Hopefully someone with this device can help you.
iMaxwell said:
Recently i install pie 9.0 on z2 play, to try to fix the fingerprint scanner and gestures but still doesnt work, i was reading that is a problem from oreo, so i want to Downgrade to oreo to nougat, it's posible?
Click to expand...
Click to collapse
How exactly did you install it? FP not working is usually just that the fw is needed, but that's only if you are running a custom rom. What specific issue were you facing before and what OS were you running
marcost22 said:
How exactly did you install it? FP not working is usually just that the fw is needed, but that's only if you are running a custom rom. What specific issue were you facing before and what OS were you running
Click to expand...
Click to collapse
Install via "ota", just donwload 9.0 official motorola firmware, put it into internal storage, then go to settings - search for updates, then install.
The problems are, fingerprint doesnt work, but this is a problem from oreo. And i want to go back to nougat
iMaxwell said:
Install via "ota", just donwload 9.0 official motorola firmware, put it into internal storage, then go to settings - search for updates, then install.
The problems are, fingerprint doesnt work, but this is a problem from oreo. And i want to go back to nougat
Click to expand...
Click to collapse
that's probably the worst available way to do it. If your phone didn't originally receive it via OTA, then you are forcing it the wrong way.
If you want to go back to nougat all you need to do is download the official N firmware, then flash everything but bootloader and gpt
What is gpt? I need to unlock bootloader and flash whit wrp? I heard about losing imei or something like that
I follow the steps on this video
iMaxwell said:
I follow the steps on this video
Click to expand...
Click to collapse
Yeah that is just terrible
iMaxwell said:
What is gpt? I need to unlock bootloader and flash whit wrp? I heard about losing imei or something like that
Click to expand...
Click to collapse
Download the official N firmware from https://mirrors-obs-2.lolinet.com/firmware/motorola/2017/albus/official/RETAIL/
Then, extract it and reboot your phone into fastboot (shut it down, hold down volume down and turn it on, you should arrive at fastboot that way)
Install minimal adb and fastboot if you dont have them installed ( https://forum.xda-developers.com/t/tool-minimal-adb-and-fastboot-2-9-18.2317790/)
After that, you open a terminal where you extracted the firmware, run fastboot devices to check that A) fastboot is installed and that B) your phone is recognized and then you run
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash oem oem.img
fastboot erase carrier
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
This WILL format your phone, but it should leave you with a booting N system(maybe, downgrading not always work and going P->N is really unusual)
I'm gonna be honest i do think all of your issues are caused by forcing an OTA where the phone wasn't supposed to have one, but it's your choice
marcost22 said:
Yeah that is just terrible
Download the official N firmware from https://mirrors-obs-2.lolinet.com/firmware/motorola/2017/albus/official/RETAIL/
Then, extract it and reboot your phone into fastboot (shut it down, hold down volume down and turn it on, you should arrive at fastboot that way)
Install minimal adb and fastboot if you dont have them installed ( https://forum.xda-developers.com/t/tool-minimal-adb-and-fastboot-2-9-18.2317790/)
After that, you open a terminal where you extracted the firmware, run fastboot devices to check that A) fastboot is installed and that B) your phone is recognized and then you run
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash oem oem.img
fastboot erase carrier
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
This WILL format your phone, but it should leave you with a booting N system(maybe, downgrading not always work and going P->N is really unusual)
I'm gonna be honest i do think all of your issues are caused by forcing an OTA where the phone wasn't supposed to have one, but it's your choice
Click to expand...
Click to collapse
The issues begin on official oreo, i upgrade nougat to oreo then, fingerprint option dissapear, then i upgrade to pie from oficial firmware but issues still remain
It really works? I didnt find any video or post about downgrade like that
Yes it does work, but it's not recommended, that's why you don't find much info
iMaxwell said:
It really works? I didnt find any video or post about downgrade like that
Click to expand...
Click to collapse
Update: 18th March 2023
**** Give Up ****
I got so fedup and decided to goto HK and get my OnePlus 11, a real CPH2449 GLO. Paid and waiting to collect.
I will not be update and maintaining this post from now on.
Why give up?
Minor issue like auto brightness and things is still something i can live along with.
Some othe rmajor issue are just impossible to make this chiniese converted 1+11 to be my daily driver:
- Auto reboot randomly
- Lagging randomly, screen lag, video recording lag.
- OTA update issue, refreshing/reinstall at every update is just anonying
My advice? just get a proper non chinese version or if you own a Chinese version just stick with colorOS.
**** Flash at your own risk ****
**** Flash at your own risk ****
**** Flash at your own risk ****
*** DO NOT OTA UPDATA Your Phone After Convert. It will brick and only Official MSM Tool can save you ***
A Oneplus user since OnePlus one. Give up Oneplus and swtiched to Nothing phone since Oneplus 10. Decided to try out OnePlus 11 and ColorOS is really pain in the a**
This post tested converting from PHB110 to CPH2447 / CPH2449. I did not test CPH2451.
Model:
CPH2447 - Indian
CPH2449_EEA - EU
CPH2449_GLO - International
CPH2451 - North America
PHB110 - China
Credits：
Thanks for their feedback
[email protected]
wtywtykk
mark332
alexander宇
daxiaamu
Following is the steps to flash the OTA updates:
Step 1:
Download all the usual tools
Download Fastboot Enhance
Android SDK
Get the firmware from this post
Firmware also availble at https://yun.daxiaamu.com/OnePlus_Roms/一加11/
CPH2449 Global A07: eea73728a1b945ea8e3ff6b628495af5.zip
ColorOS: Abandon_PHB110_V13_202301030.zip (only oplusstanvbk.img needed)
Step 2:
To boot into bootloader from Android
Turn On developer mode
Turn on USB Debug
Turn on OEM-unlock
Run $ adb reboot-bootloader
After enter into fastboot (The one with Menu and shows SECURE BOOT/DEVICE STATE)
Run $ fastboot flashing unlock
Reboot back into bootloader, as in step 2 item 4.
Step 3:
Download and unzip eea73728a1b945ea8e3ff6b628495af5.zip
Goto Fastboot Enhance
Check "Ignore Unknown Partition"
Make sure fastbootd is NO (Phone Screen: The one with Menu and shows SECURE BOOT/DEVICE STATE)
Flash payload.bin
Step 4:
Boot into fastbootd (Phone Screen: The one with language selection)
Goto Fastboot Enhance
Check "Ignore Unknown Partition"
Make sure fastbootd is YES
Flash payload.bin
Step 5:
Download and unzip Abandon_PHB110_V13_202301030.zip
Unzip make sure radio/oplusstanvbk.img exits
Boot into fastbootd (Phone Screen: The one with language selection)
Use Fastboot Enhance or command line
fastboot flash --slot=all oplusstanvbk radio/oplusstanvbk.img
Step 6:
Follow step 6 from "flash the OFP/EDL Packages"
Following is the steps to flash the OFP/EDL Packages:
Step 1:
Download all the usual tools
Android SDK
Get the firmware from this post
Firmware also availble at https://yun.daxiaamu.com/OnePlus_Roms/一加11/
CPH2449GDPR_11_A.06_2023010723370128.zip
Abandon_PHB110_V13_202301030.zip (only oplusstanvbk.img needed)
Step 2:
To boot into bootloader from Android
Turn On developer mode
Turn on USB Debug
Turn on OEM-unlock
Run $ adb reboot-bootloader
After enter into fastboot (Phone Screen: The one with Menu and shows SECURE BOOT/DEVICE STATE)
Run $ fastboot flashing unlock
Reboot back into bootloader, as in step 2 item 4.
Step 3:
fastboot flash --slot=all modem radio/modem.img
fastboot flash --slot=all boot images/boot.img
fastboot flash vbmeta_system_a images/vbmeta_system.img
fastboot flash vbmeta_system_b images/vbmeta_system.img
fastboot flash vbmeta_a images/vbmeta.img
fastboot flash vbmeta_b images/vbmeta.img
fastboot flash vendor_boot_a images/vendor_boot.img
fastboot flash vendor_boot_b images/vendor_boot.img
fastboot flash vbmeta_vendor_a images/vbmeta_vendor.img
fastboot flash vbmeta_vendor_b images/vbmeta_vendor.img
Step 4:
Go into fastbootd (Phone Screen: The one with language selection)
fastboot reboot fastboot
fastboot flash --slot=all init_boot images/init_boot.img
fastboot flash --slot=all abl radio/abl.img
fastboot flash --slot=all aop radio/aop.img
fastboot flash --slot=all aop_config radio/aop_config.img
fastboot flash --slot=all bluetooth radio/bluetooth.img
fastboot flash --slot=all cpucp radio/cpucp.img
fastboot flash --slot=all devcfg radio/devcfg.img
fastboot flash --slot=all dsp radio/dsp.img
fastboot flash --slot=all dtbo images/dtbo.img
fastboot flash --slot=all engineering_cdt images/engineering_cdt.img
fastboot flash --slot=all featenabler radio/featenabler.img
fastboot flash --slot=all hyp radio/hyp.img
fastboot flash --slot=all imagefv radio/imagefv.img
fastboot flash --slot=all keymaster radio/keymaster.img
fastboot flash --slot=all oplus_sec radio/oplus_sec.img
# Flash the ColorOS version A.08 # fastboot flash --slot=all oplusstanvbk radio/oplusstanvbk.img
fastboot flash --slot=all qupfw radio/qupfw.img
fastboot flash --slot=all recovery images/recovery.img
fastboot flash --slot=all shrm radio/shrm.img
fastboot flash --slot=all splash images/splash.img
fastboot flash --slot=all tz radio/tz.img
fastboot flash --slot=all uefi radio/uefi.img
fastboot flash --slot=all uefisecapp radio/uefisecapp.img
fastboot flash --slot=all xbl radio/xbl.img
fastboot flash --slot=all xbl_ramdump radio/xbl_ramdump.img
fastboot flash --slot=all system images/system.img
fastboot flash --slot=all system_ext images/system_ext.img
fastboot flash --slot=all vendor images/vendor.img
fastboot flash --slot=all product images/product.img
fastboot flash --slot=all my_product images/my_product.img
fastboot flash --slot=all odm images/odm.img
fastboot flash --slot=all my_engineering images/my_engineering.img
fastboot flash --slot=all vendor_dlkm images/vendor_dlkm.img
fastboot flash --slot=all system_dlkm images/system_dlkm.img
fastboot flash --slot=all my_stock images/my_stock.img
fastboot flash --slot=all my_preload images/my_preload.img
fastboot flash --slot=all my_heytap images/my_heytap.img
fastboot flash --slot=all my_carrier images/my_carrier.img
fastboot flash --slot=all my_region images/my_region.img
fastboot flash --slot=all my_bigball images/my_bigball.img
fastboot flash --slot=all my_manifest images/my_manifest.img
Step 5:
From the fastbootd screen (with language selection),
English
Format Data
Step 6:
From daxiaamu blog post,
Go in to OxygenOS, skip all the setup. DO NOT SET THE PIN
Go into bootloader again. follow step 2
Run $ fastboot flashing lock
Again, go in to OxygenOS, skip all the setup. DO NOT SET THE PIN
Once passed the setup screen. Goto settings and set the pin
Additional Tips:
If your phone goes into bootloop with oneplus logo. Most likely its not brick. Just need to do a factory reset in fastboot or QLMFlasher.
As mention by mark332 use the free edition. Goto the fastboot tab and unbrick your phone.
I also paid for the commercial edition. Received username/password which can never login to the commercial editon. Commercial edition allows flash in EDL which i wanted to try.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nice! Would it be possible to write the steps, please?
I believe you had to unlock bootloader? Have you tried locking bootloader after? Thanks.
sth_safal said:
Nice! Would it be possible to write the steps, please?
I believe you had to unlock bootloader? Have you tried locking bootloader after? Thanks.
Click to expand...
Click to collapse
i tried to, after locking the bootloader. the system not able to set the screenlock pattern
kaijern said:
i tried to, after locking the bootloader. the system not able to set the screenlock pattern
Click to expand...
Click to collapse
Ohh, that's odd. Is it just screen lock pattern or also pin locks that had issue? No luck with factory reset either I would imagine..
sth_safal said:
Ohh, that's odd. Is it just screen lock pattern or also pin locks that had issue? No luck with factory reset either I would imagine..
Click to expand...
Click to collapse
Both. I had that problem as well after unlocking the bootloader of my Chinese Onplus 11. According to a Chinese post it's a common issue and you need to keep relocking/unlocking until you are able to set the pin/pattern. Worked for me.
alexander宇 said:
Both. I had that problem as well after unlocking the bootloader of my Chinese Onplus 11. According to a Chinese post it's a common issue and you need to keep relocking/unlocking until you are able to set the pin/pattern. Worked for me.
Click to expand...
Click to collapse
Hmm.. Thanks.
So just unlock again and relock, setup phone and try out if pin works? If it doesn't repeat the post again? Would it be possible to link the Chinese post, please? Couldn't find any info online.. Did you move to Oxygen Os as well?
alexander宇 said:
Both. I had that problem as well after unlocking the bootloader of my Chinese Onplus 11. According to a Chinese post it's a common issue and you need to keep relocking/unlocking until you are able to set the pin/pattern. Worked for me.
Click to expand...
Click to collapse
I am the same.
Can I recover with relock?
sth_safal said:
Hmm.. Thanks.
So just unlock again and relock, setup phone and try out if pin works? If it doesn't repeat the post again? Would it be possible to link the Chinese post, please? Couldn't find any info online.. Did you move to Oxygen Os as well?
Click to expand...
Click to collapse
yep, that's how I resolved the problem. Don't remember where I saw it, probably a Bilibili video comment. Not yet haven't got a chance to switch, been traveling.
alexander宇 said:
yep, that's how I resolved the problem. Don't remember where I saw it, probably a Bilibili video comment. Not yet haven't got a chance to switch, been traveling.
Click to expand...
Click to collapse
Since its worling. I will wait for the international version to be avilable after Feb 7 and try to do a complete flash again. By that time is just all about from Oxygen to Oxygen nothing risky.
alexander宇 said:
yep, that's how I resolved the problem. Don't remember where I saw it, probably a Bilibili video comment. Not yet haven't got a chance to switch, been traveling.
Click to expand...
Click to collapse
I tried to relock it.
fastboot oem lock、fastboot flashing lock、fastboot oem unlock、fastboot flashing unlock
Every command gives me an error.
It seems I brick my phone.
After I typed in "fastboot flash --slot=all abl abl.elf", I got this error:
ERROR: usb_write failed with status e00002ed
fastboot: error: Could not check if partition abl has slot all
In a poor attempt to fix it, I locked BL, and now it stuck in a bootloop to FASTBOOTD
I couldn't get back to FASTBOOT with pressing physical key. Please help!
P.S. I am using mac
if you can give a step by step, or actually a video, that would actually be amazing. i fear for my phone haha
Is this version of package able to receive the OTP update of OOS?
I also bricked my phone last night, got bootloop and only was able to get into bootloader. I unbricked it by fastbootenhanced and flash the F08 payload.bin file
sunxutian said:
I also bricked my phone last night, got bootloop and only was able to get into bootloader. I unbricked it by fastbootenhanced and flash the F08 payload.bin file
Click to expand...
Click to collapse
i bricked mine as well, trying to do the same of reflashing payload.bin, but fastbootenchaned won't flash payload.bin because i can't reboot it into "fastbootd mode". any idea?
oprocks said:
i bricked mine as well, trying to do the same of reflashing payload.bin, but fastbootenchaned won't flash payload.bin because i can't reboot it into "fastbootd mode". any idea?
Click to expand...
Click to collapse
Why can't you boot into fastbood? Did you try fastboot reboot fastboot?
oprocks said:
i bricked mine as well, trying to do the same of reflashing payload.bin, but fastbootenchaned won't flash payload.bin because i can't reboot it into "fastbootd mode". any idea?
Click to expand...
Click to collapse
what you might need to do is to reinstall oneplus driver, I got unknown device when booting into fastbootd and fixed it by reinstalling driver
sunxutian said:
what you might need to do is to reinstall oneplus driver, I got unknown device when booting into fastbootd and fixed it by reinstalling driver
Click to expand...
Click to collapse
"fastboot devices" works.
this is the actual error:
fastboot reboot fastboot
Rebooting into fastboot OKAY [ 0.016s]
< waiting for any device >
fastboot: error: Failed to boot into userspace fastboot; one or more components might be unbootable.
any ideas?
oprocks said:
"fastboot devices" works.
this is the actual error:
fastboot reboot fastboot
Rebooting into fastboot OKAY [ 0.016s]
< waiting for any device >
fastboot: error: Failed to boot into userspace fastboot; one or more components might be unbootable.
any ideas?
Click to expand...
Click to collapse
Try fastboot -w to clean user data, also you can try flash boot.img or everything which can be flashed from bootloader
sunxutian said:
Try fastboot -w to clean user data, also you can try flash boot.img or everything which can be flashed from bootloader
Click to expand...
Click to collapse
tried that a few times, something about "userdata" not working right..
platform-tools>fastboot -w
Erasing 'userdata' OKAY [ 0.063s]
F2FS-tools: mkfs.f2fs Ver: 1.15.0 (2022-05-20)
Info: Disable heap-based policy
Info: Debug level = 1
Info: Trim is disabled
Info: Set conf for android
Info: Enable Project quota
Error: Sparse mode is only supported for android
platform-tools/make_f2fs failed: 4294967295
fastboot: error: Cannot generate image for userdata
any idea if there is a way to get fastboot to get userdata partition to proper state first? maybe?