Hello, Sony XA1's personal model.
I have a problem connecting to my pc when updating the firmware.
when updating the firmware it made an error at 80 percent. can not be turned on. only the red diode lights up when connected.
now to update no longer connect with the PC.
can not re-update over sony flasher - writes -
- Device connected with USB debugging off
- For 2011 devices line, be sure you are not in MTP mode
I tried through Xperia Companion - repair the software, but it will not connect - it will not connect. I do not know the advice.
do you have any advice ??
Thank you for your help
Other pc or os
flashtool
new ftf (rom)
try to flash without data
Related
Hi...
I have an XSX with XZXperience 2 installed...
I wiped the cache, system and dalvik cache to reinstall the complete OS from scratch...
I am now stuck without an operating system and not able to flash the .50 firmware.
the flashtool keeps saying the following:
9/051/2013 00:51:02 - INFO - Selected Sony Xperia S LT26i_6.1.A.2.50_Italian NO BRAND by tsukeyomi.ftf
09/051/2013 00:51:02 - INFO - Preparing files for flashing
09/053/2013 00:53:23 - INFO - Device connected with USB debugging off
09/053/2013 00:53:23 - INFO - For 2011 devices line, be sure you are not in MTP mode
Somebody help and tell me what to do please!
My mobil has the bootloader unlocked.
I am now not able to switch on my phone too!! the mobile is getting detected by my laptop when i plug it in (i get to hear a beep everytime USB is plugged in) but there is no red LED for charging on the phone...
Thread Closed, OP please keep the required assistance to one thread>>>>Here.
Thank You.
Hi...
I have an XSX with XZXperience 2 installed...
I wiped the cache, system and dalvik cache to reinstall the complete OS from scratch...
I am now stuck without an operating system and not able to flash the .50 firmware.
the flashtool keeps saying the following:
9/051/2013 00:51:02 - INFO - Selected Sony Xperia S LT26i_6.1.A.2.50_Italian NO BRAND by tsukeyomi.ftf
09/051/2013 00:51:02 - INFO - Preparing files for flashing
09/053/2013 00:53:23 - INFO - Device connected with USB debugging off
09/053/2013 00:53:23 - INFO - For 2011 devices line, be sure you are not in MTP mode
Somebody help and tell me what to do please!
My mobil has the bootloader unlocked.
I am now not able to switch on my phone too!! the mobile is getting detected by my laptop when i plug it in (i get to hear a beep everytime USB is plugged in) but there is no red LED for charging on the phone...
3lok said:
Hi...
I have an XSX with XZXperience 2 installed...
I wiped the cache, system and dalvik cache to reinstall the complete OS from scratch...
I am now stuck without an operating system and not able to flash the .50 firmware.
the flashtool keeps saying the following:
9/051/2013 00:51:02 - INFO - Selected Sony Xperia S LT26i_6.1.A.2.50_Italian NO BRAND by tsukeyomi.ftf
09/051/2013 00:51:02 - INFO - Preparing files for flashing
09/053/2013 00:53:23 - INFO - Device connected with USB debugging off
09/053/2013 00:53:23 - INFO - For 2011 devices line, be sure you are not in MTP mode
Somebody help and tell me what to do please!
My mobil has the bootloader unlocked.
I am now not able to switch on my phone too!! the mobile is getting detected by my laptop when i plug it in (i get to hear a beep everytime USB is plugged in) but there is no red LED for charging on the phone...
Click to expand...
Click to collapse
That happen when you connect your cellphone to the pc before that the software (flashtool) ask you, besides you have to connect your cellphone while your press volup (or down accord with the function that you need) until the green or blue led is on. Try reinstalling flashtool or download the last version (do it again if you already have the last one).
SOLVED!
jhodax said:
That happen when you connect your cellphone to the pc before that the software (flashtool) ask you, besides you have to connect your cellphone while your press volup (or down accord with the function that you need) until the green or blue led is on. Try reinstalling flashtool or download the last version (do it again if you already have the last one).
Click to expand...
Click to collapse
Thanks jhodax... i tried all your suggestions, but realised my mobile was softbricked...
finally after a lot of searching on this forum, i landed at this post http://forum.xda-developers.com/showthread.php?t=1849170
and boy, the feeling of actually opening up my Xperia S to reset the battery!!
Anyway, finally its working now and i was able to flash XZX2 once again...
I was using XZXperience 2 on my Sony Xperia S, and then sony companion detected that i had firmware 6.1.A.1.45 and 6.1.A.55 was available, so just to give it a try, I installed that update, but that is a failed update, it says unfortunately music player stopped working, or unfortunately xperia keyboard stopped working etc. The main problem is that my system does not recognize my XS anymore, it says USB Device Not Recognized, so I cant connect it to Flashtool or PC Companion for repair. The Sad part is that I cant even connect it in Flash Mode, I tried a hard reset by using power button and volume up buttons, but no use. I should mention that once it recognized my phone when i turned off my laptop and removed its battery too, after restarting both phone and laptop, flashtool detected that phone was connected with USB Debugging OFF, though it was on, but as a try, I unchecked USB Debugging and then checked it again, and it worked. Now my Xperia S was connected in USB debugging mode, I tried to install busybox, rooted it, and tried to install CWM recovery,flashtool said that busy box was installed and phone was rooted, but it could not install recovery and I used another tool to install recovery,which had a bat file and it installs recovery automatically. But it didnt. After restarting my phone, the same issue appeared again, My PC does not recognize my Xperia S, tried previous procedure several times, but no use. Cant even repair it as my set cant go in flash mode. What can I do? have I bricked my Xperia S? I`m in Pakistan and there is no official Sony Mobile franchise as they dont launch their flagships in Pakistan. Please help me, considering I`m used to with rooting,flashing etc. How can I connect my phone in flash mode? Thank you.
C:/flashtool/driver
Open usb_driver.exe
Choose all the drivers you need (Xperia S drivers, flashmode driver & fastboot mode driver)
Your laptop should be able to detect your phone now.
I think i'm not the only one who wants to root the T3. There are many guides which are very complicated for people who are no software developers...
http://forum.xda-developers.com/xperia-t3/general/root-firmware-18-1-1-21-t2889847
If this is too complicated then probably you shouldnt even consider rooting - procedure cant be any easier. There isnt also any other way to root T3 ATM.
And yes, this works also with .25 (4.4.4 KK). And for different ver. of T3 (5102 for example) use software for your model as base.
Ditarius said:
http://forum.xda-developers.com/xperia-t3/general/root-firmware-18-1-1-21-t2889847
If this is too complicated then probably you shouldnt even consider rooting - procedure cant be any easier. There isnt also any other way to root T3 ATM.
And yes, this works also with .25 (4.4.4 KK). And for different ver. of T3 (5102 for example) use software for your model as base.
Click to expand...
Click to collapse
I think I know what to do. Can i use the sony Emma thing as the flash tool?
what to do now
I've installed adb drivers fastboot drivers and successfully flashed the .14 kernel then switched on the phone and trying to root using Xperia rootkit is not detecting my device and stuck like this(as shown in the screen shot) what to so and PC companion is also not detecting my t3 (but while am on .32kernel it works fine)
I've flashed the .32kernel (cause am on 4.4.4) again and repeated everything but same problem,, redownloaded the kernels but same problem,,
Why rootkit is not detecting my phone ??? Plz help
need help
While m on .14 kernel rootkit or PC companion were not able to detecting my phone. On switched off state(.14kernel) flash tool displayes that the USB debugging is off and the phone is connected in mtp mode..
But before flashing .14 kernel(while am on .32kernel) I turned on USB debugging and set the USB connection mode to MSC mode (otherwise flashtool wouldn't flash kernel)... So why am facing this problem???...
After flashing .14 kernel I switched on the phone and wait at least 10 minutes then (the screen shots only Sony logo and goes black) after ten minutes when I connect the phone to the PC and lunch rootkit its not detecting showing waiting for device PC companion is also not detecting:crying:...... What to do now
avayrocks said:
While m on .14 kernel rootkit or PC companion were not able to detecting my phone. On switched off state(.14kernel) flash tool displayes that the USB debugging is off and the phone is connected in mtp mode..
But before flashing .14 kernel(while am on .32kernel) I turned on USB debugging and set the USB connection mode to MSC mode (otherwise flashtool wouldn't flash kernel)... So why am facing this problem...
After flashing .14 kernel I switched on the phone and wait at least 10 minutes then (the screen shots only Sony logo and goes black) after ten minutes when I connect the phone to the PC and lunch rootkit its not detecting showing waiting for device PC companion is also not detecting:crying:...... What to do now
Click to expand...
Click to collapse
Hi. Before you flash .14 you need to enable usb debugging in your phone, connect it to your pc via usb cable and check the "allow always..." checkbox in your phone:
P.D. If the popup is not showing when you plug your phone, then open a terminal (cmd in windows), launch adb devices command and you should see the popup in your device. If does not, unplug the phone, stop adb, plug the phone again and try launching adb command.
did it
pepinliria said:
Hi. Before you flash .14 you need to enable usb debugging in your phone, connect it to your pc via usb cable and check the "allow always..." checkbox in your phone:
P.D. If the popup is not showing when you plug your phone, then open a terminal (cmd in windows), launch adb devices command and you should see the popup in your device. If does not, unplug the phone, stop adb, plug the phone again and try launching adb command.
Click to expand...
Click to collapse
Rooted bro thnkx for help
Please need help with XA1_G3121 flashing
It always display device connected in flashmode but driver is too old when flashing...
XA1 drivers are not included in Flashtool drivers so i downloaded its drivers from sony site and installed it via device manager....
I can't flash it with pc companion since BL is unlocked...
Firmware:G3121_48.1.A.2.112 (latest firmware)
Both 0.9.25.0 and 0.9.26.0 flashtool versions display "device connected in flashmode but driver is too old"
The older versions of flashtool gives: "root:this bundle is not valid and cannot open bundle"
Tried n Googled for solutions but all went awry...
Your help is much appreciated...
Thank You..
andyblessing said:
Please need help with XA1_G3121 flashing
It always display device connected in flashmode but driver is too old when flashing...
XA1 drivers are not included in Flashtool drivers so i downloaded its drivers from sony site and installed it via device manager....
I can't flash it with pc companion since BL is unlocked...
Firmware:G3121_48.1.A.2.112 (latest firmware)
Both 0.9.25.0 and 0.9.26.0 flashtool versions display "device connected in flashmode but driver is too old"
The older versions of flashtool gives: "root:this bundle is not valid and cannot open bundle"
Tried n Googled for solutions but all went awry...
Your help is much appreciated...
Thank You..
Click to expand...
Click to collapse
Have you tried Sony Xperia Flashtool Emma?
It can be found here https://developer.sony.com/develop/open-devices/get-started/flash-tool/download-flash-tool/.
Sent from my Sony Xperia XA2 using XDA Labs
Finally I was able to bypass "device connected in flash mode but driver is too old" error and flashed successfully by continually deleting somc device in device management while phone is connected in flash mode until somc device stops appearing in device management but rather, unknown device under "other device"...