charging is slow! help? - Xiaomi Mi Mix 2 Questions & Answers

monitoring my battery ampere with ampere app
and it doesn't go above 1.7A
it says it supports 3500A so why this?
using ressurection remix 8.1. with original charger
.
.
.
plz shares yours too and what custom room goes beyond 2200A

Sehab084 said:
monitoring my battery ampere with ampere app
and it doesn't go above 1.7A
it says it supports 3500A so why this?
using ressurection remix 8.1. with original charger
.
.
.
plz shares yours too and what custom room goes beyond 2200A
Click to expand...
Click to collapse
Have you experienced this slow charging issue on an Official MIUI ROM, or another Unofficial ROM like LineageOS or Xiaomi.eu?
Just from Googling around, it seems like it could be a Resurrection Remix problem, or a hardware problem with the phone. I can't link to it because I'm a new member of the forums, but there's a Reddit user who had to install a new USB board and battery in his Redmi Note 3 to fix his slow charging problems.

Related

Quick charge doesn't work on global ROM

The only time quick charge has worked on my phone is with the original ROM that came on the device. I've tried the developer rom and global stable, and neither of these work with quick charge. Even with the supplied wall charger it peaks at 1.7 amps. All my USB battery banks charge it at that speed too. I was able to charge at 3.2 amps with the original rom. Anyone else?
Same here after updating to miui9 it doesn't work.
Quick Charge Not Working.
DJSLINKARD said:
The only time quick charge has worked on my phone is with the original ROM that came on the device. I've tried the developer rom and global stable, and neither of these work with quick charge. Even with the supplied wall charger it peaks at 1.7 amps. All my USB battery banks charge it at that speed too. I was able to charge at 3.2 amps with the original rom. Anyone else?
Click to expand...
Click to collapse
Facing the same after MIUI 9 Update.
Yep, I just confirmed it by reinstalling miui 8 global. Quick charge works on that one, but not on 9.
Gamerz_den said:
Facing the same after MIUI 9 Update.
Click to expand...
Click to collapse
I don't get the charging rapidly message anymore on the new global rom either but ampere said that my phone was charging at 2.7A (battery was about 80% full) before it peaked and started gong down as it 90% etc....
This is a known bug... Report this to miui, not here
Global beta 7.11.6 is also miui 9.1... There its working
el3c said:
This is a known bug... Report this to miui, not here
Global beta 7.11.6 is also miui 9.1... There its working
Click to expand...
Click to collapse
If it's a known bug why would I report it anyways? It's already known. I'm using a forum for open discussion as that's the point of a forum.
I'll try the 7.11.6 ROM and see.
Edit: 7.11 is the developer ROM. I've already tried that one and quick charge does not work. For me it's only working on miui 8. None of the miui 9 ROMs have shown the charging current on the lock screen. I had to use a Drok USB meter to test the charge speed on miui 9 since the lock screen no longer shows the charge current.
DJSLINKARD said:
If it's a known bug why would I report it anyways? It's already known. I'm using a forum for open discussion as that's the point of a forum.
I'll try the 7.11.6 ROM and see.
Edit: 7.11 is the developer ROM. I've already tried that one and quick charge does not work. For me it's only working on miui 8. None of the miui 9 ROMs have shown the charging current on the lock screen. I had to use a Drok USB meter to test the charge speed on miui 9 since the lock screen no longer shows the charge current.
Click to expand...
Click to collapse
7.11.6 has a working quick charge!
It's working for me on the 9.1.1.0 global stable rom. Let the screen turn off completely then press the power button and you should get "Quick charging, tap to view details" at the bottom. It doesn't stay there very long and changes to "About x mins until full" after a few seconds and then the quick charging notice doesn't ever seem to come back again.. It seems it only shows on the lock screen and even then just for a few seconds. It does work though
9.1.1.0 Global stable working on my Mi Mix 2
Working on my Mi Mix 2 with 9.1.1.0 Global stable rom and original charger
colorado_al said:
Working on my Mi Mix 2 with 9.1.1.0 Global stable rom and original charger
Click to expand...
Click to collapse
Are you 100% sure its working? I see so many posts about people experiencing the exact same issue as me. Are you still on 9.1.1.0 or did you update to 9.1.2?
mine work perfectly with latest update miui 9 )
Sosoon2816 said:
mine work perfectly with latest update miui 9 )
Click to expand...
Click to collapse
Ok, so I just upgraded to the 9.1.2.0 Global stable again, and it looks like quick charge is working, but they've just removed the amperage reading from the lock screen, which sucks because that was such a clutch feature.
DJSLINKARD said:
Ok, so I just upgraded to the 9.1.2.0 Global stable again, and it looks like quick charge is working, but they've just removed the amperage reading from the lock screen, which sucks because that was such a clutch feature.
Click to expand...
Click to collapse
idk why, but i think it would not have much effect to me, right now, i just want the next update will support quick reply at lock screen
Quick charge doesn't work with the standard charger. I had the global dev and now the global stable of MIUI 9 and with both quick charge works perfectly fine, just not with the standard charger.
DaSoul said:
Quick charge doesn't work with the standard charger. I had the global dev and now the global stable of MIUI 9 and with both quick charge works perfectly fine, just not with the standard charger.
Click to expand...
Click to collapse
Why is this so inconsistent for everyone? Quick charge definitely works for me on the standard charger, although I don't use it. I'm on the latest 9.1.2 global stable.
As I said before, quick charge DOES work on 9.1.2 global stable, but without an app like ampere you'll never know it's actually working. We need to be able to see the actual charging current, and not some notification that says that it's quick charging.
Global Stable 9.5.4.0 (Oreo), QC works, but only with 6V and 1,2A

Slow charging on custom rom

Slow charging on custom ROMs while it's good on MIUI 9 and 10 but when I flash a custom ROMs 8 or 9 facing slow charging issue only 970ma on custom ROMs charging from quick charge 3.0 but on MIUI 10 it's normally working good .
Need help
Which custom Rom and kernel? I tried PE Pie, McAOSP and AOSiP Oreo all support quick charge. Kernel = Derp or Kirks!
Zanr Zij said:
Which custom Rom and kernel? I tried PE Pie, McAOSP and AOSiP Oreo all support quick charge. Kernel = Derp or Kirks!
Click to expand...
Click to collapse
I don't install other kernal only use the one which comes with room using PE and facing issue .
SSfalcon said:
I don't install other kernal only use the one which comes with room using PE and facing issue .
Click to expand...
Click to collapse
Derp is the built in kernel of PE and I have no problem with charging
If the phone goes to sleep then charging ramps up to 1600-1900 mAh,if you use the phone while charging the rate hovers around 600-1000 mAh.
epicwarlock said:
If the phone goes to sleep then charging ramps up to 1600-1900 mAh,if you use the phone while charging the rate hovers around 600-1000 mAh.
Click to expand...
Click to collapse
I don't use the phone while charging but screen while be on without any use and it shows 970ma on Ampere app
With Kirks kernel, even using while charging, it still good, much faster than stock kernel
Zanr Zij said:
With Kirks kernel, even using while charging, it still good, much faster than stock kernel
Click to expand...
Click to collapse
How many mAh do you get
SSfalcon said:
How many mAh do you get
Click to expand...
Click to collapse
About 2000-2500mAh
Zanr Zij said:
About 2000-2500mAh
Click to expand...
Click to collapse
Without any use I get 970 ma only what's the issue I don't know .
Do you ??
SSfalcon said:
Without any use I get 970 ma only what's the issue I don't know .
Do you ??
Click to expand...
Click to collapse
How do you measure it?
Zanr Zij said:
How do you measure it?
Click to expand...
Click to collapse
Though Ampere app on playstore.
SSfalcon said:
Though Ampere app on playstore.
Click to expand...
Click to collapse
Find something like USB Tester. But first change your cable
I use this one https://www.ebay.ca/itm/LCD-USB-Det...m=291967968309&_trksid=p2047675.c100005.m1851 to measure. I don't have any charging issues on custom ROM's (been using Pixel Experience 8.1/9.0) and it charges the same as MIUI did. I use a Choetech cable, and have used 2 different QC 3.0 chargers. I charge at around 14w, which may be the max my cable supports. I have never used the original Xiaomi cable/charger.
I tried kangaroox kernel and it shows wayyy low mili ampers on aida64 battery section... And my phone also dosent heat up like when i used stock rom while charging... this also happens in pixle experience rom too.... Can you measure it too...??

Q : i Got Confused ! .

i have a small question to whom ever tried custom roms for Mi Max hydrogen,
i have my brother phone and he need a new tested rom except ( MIUI ) , i already looked for him here but its a bit confusing ,
to many uncompleted & unstable roms here which need enhancement and some still need fixing ,, any one can give me a single rom that is 100% tested Stable and have no sound quality issues ? and the most important is fast-charging and in-Call volume Quality ! .
Thanks ! ..
and incase any one asked , yes i got retired already , no more Dev. just a google'r .
Yes you can try linage os ROM which gives more performance than any other ROM but not more customization and but from my side I specially recommend you to take aosp extended ROM everything works excellent except casting and you can trigger fast charging in kernal audiutor but it can make your battery hotter .
Thanks bahai ! , any more thoughts Guys ? its not mine , for my bro so i don't wanna get annoyed after all
hi there i have problem regarding charging this mimax, after update to latest 10.2.1.0 (NBCMIXM) firmware, my mimax become slow charging (ampere reading 120-360mah) and will cut off if battery percentage more than 80%. already replace charger, cable, clean format but none work. please advice. thanks
Clan204 said:
hi there i have problem regarding charging this mimax, after update to latest 10.2.1.0 (NBCMIXM) firmware, my mimax become slow charging (ampere reading 120-360mah) and will cut off if battery percentage more than 80%. already replace charger, cable, clean format but none work. please advice. thanks
Click to expand...
Click to collapse
how old is you'r phone , i replaced my brother battery last month , was doing the same ! , if you need my advice i advice to not use fast charger ,, i know max support it but still the built in battery die faster with time ! .. just saying
Romiui said:
how old is you'r phone , i replaced my brother battery last month , was doing the same ! , if you need my advice i advice to not use fast charger ,, i know max support it but still the built in battery die faster with time ! .. just saying
Click to expand...
Click to collapse
thx for reply, it's time for me to visit mi service center, btw mine is 2 years old, and battery still can hold charge, i lucky to get it charge once last two days ago and still got 30% power left with 2 hours plus sot.

Question Is there any rom that have smart charging like in CrDroid?

I'm looking for rom that have smart charging feature built in rom, is there any rom that still have that feature other than Crdroid 11 ?
jamesreidkwel said:
smart charging
Click to expand...
Click to collapse
What's that supposed to be anyway?
Couldn't find much at
https://github.com/crdroidandroid/crdroid_features
SigmundDroid said:
What's that supposed to be anyway?
Couldn't find much at
https://github.com/crdroidandroid/crdroid_features
Click to expand...
Click to collapse
The capability to set to charge only till 80%. Have read in TG that this feature was dropped, due to the danger of getting the device bricked because of her. There's a post explaining why here in xda, made by arrow dev.
You can root your phone with Magisk and get the Magisk Module "Advanced Charging Controller".
Then, in a Terminal, you do "sudo acc 80" to make it stop charging @ 80%.
jamesreidkwel said:
I'm looking for rom that have smart charging feature built in rom, is there any rom that still have that feature other than Crdroid 11 ?
Click to expand...
Click to collapse
Sorry for being a bit late to the party, as cyanGalaxy quoted, you can use "ACCA", it requires Root, check out my post,
QI Wireless Charging Receiver for the Poco F3 (TESTED WORKING)
I have been a fan of wireless charging for many years since my LG G4, with the optional, QI charging rear case, As the F3 lacks QI charging, i have been struggling to find a compatible charging receiver, after buying 2 incompatible charging...
forum.xda-developers.com
I have only found 2 roms with this feature, crDroid 9.0 and the rom i use, the
AMAZING Evolution-X 7.4,
Smart Charging works GREAT on this rom
Try miuivn. It has smart charging pre-enabled. it is based on miui 14 (chinese) and android 13 official. Im using it as a daily driver and havent seen any bugs yet.
bangash110 said:
Try miuivn. It has smart charging pre-enabled. it is based on miui 14 (chinese) and android 13 official. Im using it as a daily driver and havent any bugs yet.
Click to expand...
Click to collapse
Hi,
Is the Smart charging feature the same as this
johnr64 said:
Hi,
Is the Smart charging feature the same as this
Click to expand...
Click to collapse
Smart charging is known as optimized charging in miui chinese based roms.
bangash110 said:
Smart charging is known as optimized charging in miui chinese based roms.
Click to expand...
Click to collapse
Are you able to customise the maximum charge level as with Evolution-X,
I like to charge my F3 between 35% and 65%,
this lasts me around 8 hrs and only generates 0.03 cycles,
this will hopefully keep my battery in tip top condition.
johnr64 said:
Are you able to customise the maximum charge level as with Evolution-X,
I like to charge my F3 between 35% and 65%,
this lasts me around 8 hrs and only generates 0.03 cycles,
this will hopefully keep my battery in tip top condition.
Click to expand...
Click to collapse
There is no built-in option for that but there are automated tasks you can set for that I guess. I also never have used Accu Battery app.
bangash110 said:
There is no built-in option for that but there are automated tasks you can set for that I guess. I also never have used Accu Battery app.
Click to expand...
Click to collapse
Hi,
I`ve been looking for many years for a rom with the "Smart Charge" feature, i have only found two for the F3, Evo-x and crDROID,
i used to use ACCA until Evo-X came along, i am always on the look out for roms with this feature to see how it compares.
I brought my F3, New 14 months ago and it still has 95% of the battery capacity left according to ACCU.
I try to minimise the battery cycles and phone temperature,
hopefully by doing this it will keep my Battery in Tip Top condition.
bangash110 said:
Smart charging is known as optimized charging in miui chinese based roms.
Click to expand...
Click to collapse
What rom is this? Xiaomi.eu?
LilBlinx said:
What rom is this? Xiaomi.eu?
Click to expand...
Click to collapse
No this rom is called miuivn.
There's already some roms with it. But most of the maintainers aren't including it, because it can bring issues.
Anyway, I when I'm not in a rom with Smart charge, I always use a app called "battery charge limit". Super lightweight that allows to smart charge.
lapirado said:
There's already some roms with it. But most of the maintainers aren't including it, because it can bring issues.
Anyway, I when I'm not in a rom with Smart charge, I always use a app called "battery charge limit". Super lightweight that allows to smart charge.
Click to expand...
Click to collapse
Hi,
Yes i also read about Charging Issues regarding Smart Charging, before i switched to Evo-X, i used ACCA and this was good, but i think it`s better to have this feature built in.
There were post regarding dead phones ect using the smart charge function,
yet i used ACCA for 10 months without any issues before switching to EVO.
If possible could you link to "Battery Charge Limit" as I'm not aware of this app,
cheers.
johnr64 said:
Hi,
Yes i also read about Charging Issues regarding Smart Charging, before i switched to Evo-X, i used ACCA and this was good, but i think it`s better to have this feature built in.
There were post regarding dead phones ect using the smart charge function,
yet i used ACCA for 10 months without any issues before switching to EVO.
If possible could you link to "Battery Charge Limit" as I'm not aware of this app,
cheers.
Click to expand...
Click to collapse
Hello buddy. Yeah I think we already have discussed that on other post. Supposedly it could bring serious issues to pmic controller.
But I used it around 3 years on my previous device (oneplus 3), without any issue. And now I've been using on poco, without any problems too. But well, I'm aware that someday it could turn bad.
I can't find on internet, but it's available on TG - https://t.me/RohailsHub/794.
If you prefer I can upload the apk.
lapirado said:
Hello buddy. Yeah I think we already have discussed that on other post. Supposedly it could bring serious issues to pmic controller.
But I used it around 3 years on my previous device (oneplus 3), without any issue. And now I've been using on poco, without any problems too. But well, I'm aware that someday it could turn bad.
I can't find on internet, but it's available on TG - https://t.me/RohailsHub/794.
If you prefer I can upload the apk.
Click to expand...
Click to collapse
If you could uploaded it that would be great help , i normally use pixeldrain
cheers.
johnr64 said:
If you could uploaded it that would be great help , i normally use pixeldrain
cheers.
Click to expand...
Click to collapse
Here
Some custom ROMs that have smart charging feature built-in include:
AOSiP ROM
Evolution X ROM
Paranoid Android ROM
Please note that the availability and functionality of these features may vary depending on your device and the version of the ROM you are using. It's recommended to check the ROM's official XDA thread or the Github repository for more information.
lapirado said:
Here
Click to expand...
Click to collapse
Hi,
Just a small update regarding "Smart Charging", I had to revert back to ACCA, as i use a QI Wireless receiver/adaptor to charge my phone most of the time and found that when QI charging my battery temperature was getting worryingly high,
at one point it reached 40.5 degrees, yet when using a standard charger my battery was fine.
I tried the app that you uploaded (Many thanks) but it looked very similar to ACCA except it had less functionality, i also found an (almost) identical Program on the play store.
So for now i have disabled the "SMART CHARGING" function in the Evo-X rom and reverted back to ACCA, as i am able to set the charge temperature.
I have set it to stop charging at 35 degrees and resume at 30 degrees,
I have also ordered a replacement QI Receiver to see if it resolves my issue.

Redmi Note 8 Fast Charger Problem

Hello guys. My Redmi Note 8 phone had a slow charging problem, I solved the problem by installing the Ryzen kernel, but then the fast charging feature was turned off. I activated fast charging in Orange Fox settings, but it did not improve, I installed a fast charging module with Magisk and it still did not work. Is there a kernel version you can recommend guys? Thanks in advance for your help. MIUI miuimix 12.5.4 Stable Rom Android 11 Ryzen Kernel 4.14.256
Recommend some Kernels that support fast charging on Chinese variant.
There are lots of Kernel support fast charging on Chinese variant, A11-A13. Meow, Lighting, Cara, Cryo, and so on. All of them active on Telegram, but just a few of them post on XDA. I don't know why. In case someone need fast charging on...
forum.xda-developers.com

Categories

Resources