Related
O.k my wife got an AT&T Samsung Galaxy S3 when they first came out I bought it for her and it has this rom build on it l747UCALG1 and mine which I just bought about three days ago have this build on it l747UCALH9. Her build I was able to root if need be but my phone I can't and I am already on 2 count of the custom binary and I can't reset it since some how I can't root the phone the developers are seeing all of this stuff that we are doing to the phones and I believe they are trying to stop us. But anyway can some one tell me since I have a copy of her stock Firmware how can I just flash my phone or what have you with her stock firmware which is l747UCALG1 so I can root my phone. Also if you don't mind please leave me a clear step-by-step way to do it and if it works without doing any damage at all to my phone, and if I want to later go back to the stock that is on my phone now I can but I don't think I will unless I have to send or take it in ever for warranty repair or just sale it. If this works right leave me your e-mail or if you have a paypal account give me that address or what have you and I will send you a donation.. (Thanks)
Sincerely,
System Network Admin
http://forum.xda-developers.com/showthread.php?t=1739426
OR
http://forum.xda-developers.com/showthread.php?t=1746665
How to Revert to Old Firmware & Root Newest Release -
Hello and welcome to XDA.
I understand your concern to root your device especially with it being on the latest firmware, but I will do my best in order to explain every step to you in the utmost detail. I am currently on I747UCLH9 with a Custom ROM. Meaning I kept the Modem & Bootloader and kicked the Kernel and Firmware. Before I begin, I would like to ask you to thank to all the Developers / Posters who made & put this content together as this would not be possible without them. I will link all of their original posts at the end of this. Be sure to give credit to every one of them and please make sure to give thanks to them. I take absolutely NO CREDIT for any of these links/steps whatsoever. I simply researched and compiled them in order to help you. With that being said, let us begin.
Before anything you must remember this. After you are finished downloading whatever items you need, you MUST (and I cannot stress this enough) FACTORY RESET YOUR DEVICE. Reason being is because a lot of other people have tried this same process of downgrading without wiping and ended up getting startup boot errors. Be sure to NOT sign into your Google account. This is just a warning, follow the steps below to know when you should begin this process.
All files you download should be saved on your desktop. Personally I prefer to make a separate folder for these kind of delicate things. Keeps it organized so you don't forget where you are.
Make sure your phone IS NOT plugged in to your computer as of right now & you have NO external SD card.
Now;
Let's begin.
Before you start be sure you have the Samsung USB drivers installed. Which you can get from Samsung's website or here.
Samsung USB Drivers
Also be sure that you have WinRAR installed as well which you can get right here.
WinRAR
To be on the VERY SAFE side you must download ADB (Android SDK). What you must do is when it asks you for where you would like to install it, you MUST ONLY CLICK "Local Disk C:" . AND THATS IT. The best thing is to keep it here so when you have to execute a command line, it will be very simple. You will have a folder called "android" here. THAT IS YOUR ADB FOLDER. You will understand what I mean shortly. *Note* this is for CWM-T (ClockworkMod Touch).
Android SDK
1. Download the stock rooted LG1 Firmware. I747UCLG1 Stock + Root Only.
2. Right-Click the LG1 Firmware you just downloaded and extract it. It is currently root69.stock_ATT_I747UCALG1.7z ; the extraction process will turn it into the correct .tar file (Flashable file type with Odin)
3. Now that you have the Stock ROM, you need..well ODIN! Here's the link. Odin 3.07.
4. Since it is in .zip format you need to extract this as well. You will end up with 4 files. Right-Click on the Odin3 v3.07.exe and run it as administrator. Now you are at the Odin screen with nothing there -_-".
5. Factory reset your phone. Just let it boot up but DO NOT sign into your Google account, just click through skip everything head straight to your Settings, then Developer Options & make sure USB Debugging is enabled/checked. Back out of your settings completely and you are at the home screen.
6. Now, just hit the power button and turn your device off. After it is completely turned off hold the Volume Down + Home button. While holding these 2. Press and hold the Power button. You should now be holding all three buttons at the same time waiting for a green lettered screen to come on (Download Mode). Use the phone keys to select the option to continue. Your phone will now say Downloading, do not turn off device. (Or along those lines).
7. After selecting the option that sends your phone to the screen with the text "Downloading, Do not turn off device." You should be holding your phone in hand with USB plugged into your computer but your device is not connected. Odin is open on your computer screen with nothing still. From here just plug your phone in and you will see a pop-up in the first box of many under the Odin logo which says "COM: #".(#: Being a select number of your device. This is of no importance, as long as you see this pop up.) Once you see this your phone will be ready to be flashed back. Just click the PDA button and browse to the root69.stock_ATT_I747UCALG1.tar file. (Be sure you click the .tar and not the .zip.)
8. Check to make sure no other boxes should be checked except for Auto-Reboot.
9. Press Start and wait for the process to finish.
10. Everything should go through fine and your phone will start back up and you will be on LG1. You are now on stock firmware BUT rooted. Unplug your phone, Skip past everything once again and make sure USB Debugging is enabled. Keep your phone unplugged & don't forget to close ODIN.
Now before you do anything. You need a Custom Recovery AKA CWM. Well in this case we will be installing the latest touch version.
11. Download the latest ClockworkMod Touch from here. This link is saved in a way specifically from their website. You can either go to www.clockworkmod.com and browse the ROM Manager tab for the 6.0.1.4 Recovery. OR you can just right click the link provided right here and press "Save As..." this file will come up and asked to be saved as recovery-clockwork-touch-6.0.1.4-d2att.img. RENAME IT AS "recovery.img" without the quotes & save it.
ClockworkMod Touch 6.0.1.4
12. Now that you have this file. Plug in your phone to your computer and in the root folder of your phone storage and copy the recovery.img file to it; which is the first folder that pops up when you press open when you plug your phone in. (Remember no SD CARDS!)
13. Now, click the Start button on your taskbar and in the search bar type cmd. Now you will see cmd.exe; press enter and you will see the Command Prompt open. If you saved the Android SDK the way I told you to, you can copy and paste the line below. If you saved it somewhere else you can change the folder simply by browsing to the android folder. Make sure you click on the "platform-tools" folder. NOT the "platform" folder. Also whichever directory it is you must add a "\" at the end so it will find the location correctly.
cd C:\android\platform-tools\
14. Now you are in the directory time to run ADB Shell and flash that recovery! Copy and paste or type the following; I recommend you copy and paste the last line as it gets tricky. After the SU command your phone will be detected.
First you type adb shell
following that su
and finally dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p18
As you can see in the last command it is named recovery.img there are no special characters or numbers or symbols to mess with the flashing. After you run this command you will an output similar to the following.
14004+0 records in
14004+0 records out
7170048 bytes transferred in 1.430 secs (5014019 bytes/sec)
Finish up this step with the following command
reboot recovery
15. Your device will now restart and head straight into recovery. Congrats you now have LG1 Stock + Root with CWM-T. Unplug the USB and press "Reboot System".
TO UPGRADE BACK TO LH9 WITH ROOT AND CWM-T
Before I begin.
You must remember that this step REQUIRES you download 4 files to go on the root of your phone memory. Your phone should now be on the home screen. Plug it in and open your phone memory. With that being said you need the following files. The Rom, Modem, Bootloader, and Kernel. You will be flashing them in this following order as well.
16. Download the following pieces and save them to the root of your phone's memory. Be sure to remember which file has what name so when you enter the recovery you aren't lost as to which to flash first.
I747UCLH9 ROM Download
I747UCLH9 Modem Download
I747UCLH9 Bootloader Download
I747UCLH9 Kernel Download
17. After everything has finished transferring, remove the phone from the computer and turn your phone. Remember how you got into download mode? Well instead of holding Volume Down + Home, you hold Volume Up + Home. While holding these two press and hold your power button until you see it says Samsung Galaxy S III. If you look at the top left hand of the screen while it's JUST turning on. You will see some blue text flash. When you see that you know your entering the recovery and can release the buttons.
18. You are back at the recovery. You must now do the following. Touch the options as I list them. Follow these steps precisely.
- Wipe Data/Factory Reset
- Yes -- Delete all user data
- Wipe Cache
- Yes - Wipe Cache
- Advanced
- Wipe Dalvik Cache
+++++Go Back+++++
- Install Zip from SD Card
- Choose zip from SD Card
Now choose them in the following order, ROM, Modem, Bootloader, and finally Kernel.
WAIIIITTTTTTTT! After you are finished flashing the Kernel you MUST do the following. Click options as I state them.
- Wipe Cache
- Yes - Wipe Cache
- Advanced
- Wipe Dalvik Cache
- Advanced
- Fix Permissions
+++++Go Back+++++
Reboot System
19. Wait for your phone to reboot and NOW you can sign into your Google account. Go past everything go into your App drawer first and check for Superuser/SuperSU once you see that, go into your settings and check your ROM, Modem, Bootloader, Kernel. Yes. They are bone stock with root. Congrats you achieved maximum upgrade with root.
Now I would like to give my shout-outs; Thanks; and share the following posts that helped me compile this. I couldn't have done it without you guys.
neverends - Samsung Drivers & Odin provided. Steps to flash with Odin as well.http://forum.xda-developers.com/showthread.php?t=1722686
mrRobinson - I747UCLG1 Stock root injected file. Location of Odin, and commands to execute ADB shell to flash recovery.
http://forum.xda-developers.com/showthread.php?t=1739426
drothenberger - Provided CWM Flashable version of I747UCLH9. Blessing, really. Stock root with latest FULL update without having to revert back to LG1 stock.
http://forum.xda-developers.com/showthread.php?t=1896773
ALSO
Thanks to you all above; the CWM Team, CM10/AOKP Team, Moderators & Posters alike. None of this would have been possible without you. Keep up the good work. Bless -
jaysoblitzed said:
Hello and welcome to XDA.-
Click to expand...
Click to collapse
You made an awesome guide!! Hope he made a generous donation. Thanks!!
werked said:
You made an awesome guide!! Hope he made a generous donation. Thanks!!
Click to expand...
Click to collapse
Thank you, I really appreciate that. I don't accept donations I simply did it to help those who wanted/needed it
Sent from my T&K Blessed SGH-I747
I do not see the 4 download links for the ROM, Modem, Bootloader and Kernel. Can you post them.
I will fix the links but if you simply look at the people / threads I have given credit to at the bottom of my guide you will see drothenberger's thread. He has the original links there. Mind you, you MUST scroll down to the part where it says "PIECES:" and download following his links. Don't worry I will re-post them accordingly.
Sent from my T&K LH9 Blessed SGH-I747
Does upgrading from rooted LH9 from a rooted LG1 trip flash counter since we are installing 4 separate files instead of 1 .tar?
thanks!
U9200 AIO guide
This guide is made by me, but I've collected information from many others.
Special thanks to: arkedk, Urmet77, lee140685, faust93, spanorg, kiprap and others.
First of all:
1. I am not responsible for ANY bricked device! You are doing this at your own risk.
2. Downloads are located here. Most of my uploads are heavily compressed by 7zip. Only 7zip will unzip correctly.
3. Install ADB and FASTBOOT drivers for making stuff in this guide work. Very easily done with: 15 seconds ADB Installer by Snoop05 @ xda
Eventually: Android SDK | Guide by demkantor | Guide by TeamAndroid
4. Backup stuff you want to keep. Easy with tools such as: MyPhoneExplorer, Super Backup, Titanium Backup or others. (Use Google)
5. Other things you should know:
→ Reboot phone to recovery: Turn on while holding volume up + volume down. Or through ADB: "adb reboot recovery"
→ Reboot phone to fastboot: Turn on while holding volume down. Huawei logo will appear and won't disappear. Or through ADB: "adb reboot-bootloader"
→ Shut down phone if it freezes: Hold power button until dead.
→ For ADB to work, debug mode must be enabled, and you must choose "Hi suite" as USB connection mode.
→ Some Huawei ICS ROM's comes without the FM radio app. If you want it, you can install this apk. NB: ONLY ICS (Android 4.0.X). For JB: B704 was the first version to include FM radio.
Here is "ascend-p1" forum category on xda: https://forum.xda-developers.com/t/ascend-p1
Gain root access (Works on ANY Huawei stock firmware. Inspiration taken from arkedk's thread)
TWRP has the ability to root our device, regardless of firmware version!
1. Download TWRP v2.6.3.0 (img). Unzip it, and place the .IMG in "C:\Program Files (x86)\Android\android-sdk\platform-tools" folder.
2. Turn off your phone. Restart it while holding volume down (Fastboot mode). Connect your phone via USB. (ADB: adb reboot-bootloader)
3. In the "C:\Program Files (x86)\Android\android-sdk\platform-tools"-folder, hold shift while right click. Choose "open command window here".
5. Write "fastboot devices" to verify that the computer detects your device. If not detected, you failed install Fastboot drivers. (Look at the top of this guide)
6. Write "fastboot flash recovery recovery.img". This will flash/ install TWRP to your device. (Given that your recovery file is named recovery.img)
7. Boot into your new recovery, TWRP. (Volume + and - together at startup)
→ Go to the "Mount" menu and mount System.
→ Then go to the Reboot menu and reboot the system.
→ When it detects you are not rooted, TWRP will ask if you want to root.
→ Swipe to do so and let it boot back into the system.
8. Hit the SuperSU icon and let it setup for the first time. Either by downloading a flashable zip or by going to the Play Store. Both methods works.
9. You should now be rooted!
Install/flash stock or custom recovery. (Root not required.)
1. Download the recovery you want. Place the .IMG file in "C:\Program Files (x86)\Android\android-sdk\platform-tools"
2. Turn off your phone. Restart it while holding volume down (Fastboot mode). Connect your phone via USB
3. In the "C:\Program Files (x86)\Android\android-sdk\platform-tools" folder, hold shift while right click. Choose "open command window here".
4. Write "fastboot devices" to verify that the computer detects your device. If not detected, you failed install Fastboot drivers. (Look at the top of this guide)
5. Write "fastboot flash recovery <recovery_name>.img".
→ Let's say the recovery file is named twrp.img. Then you will type: "fastboot flash recovery twrp.img"
6. If unsuccessful, try again, be very careful about typing it right. If successful, write "fastboot reboot" to reboot your phone. You are done.
Install any Huawei stock firmware, regardless of version (even from custom ROM)
- This will delete everything on your phone's internal memory, and you will loose root.
- The easiest way is by first flashing Intermediate Pack (B123). This is a stock Huawei ROM that will flash regardless of previous firmware version. Any Huawei ROM then will flash straight from Intermediate Pack. No build.prop modifications needed!
- Chinese versions don't have GAPPS installed. This must be installed through a custom recovery after flashing the firmware.
1. Grab "Intermediate Pack", desired firmware version, intermediate FashPack. Links in bottom of this guide.
2. Take the RECOVERY.IMG out of intermediate FlashPack, and Install it through the steps above. (fastboot flash recovery recovery.img)
3. Place "Intermediate Pack" UPDATE.APP on your SD-card. The file structure MUST be: (Root of SD-card) dload\UPDATE.APP
4. Boot into recovery (Volume up+down when powering on the device). This should start flashing procedure of B123, Intermediate Pack. If it doesn't work and you come from a custom ROM, you must change build.prop to the one included in Intermediate Pack FlashPack. See "FAQ" on how to replace build.prop.
5. After install, it will boot. Now switch the UPDATE.APP from Intermediate Pack with the one from desired firmware version. ((Root of SD-card) dload\UPDATE.APP)
6. Boot to recovery. The firmware flashing procedure will start.
Chinese version extra instructions. This is the time to install GAPPS! B704 extra instructions! arkedk has made a zip to enable all languages in B704. Grab Enable all languages in B704, by arkedk
→ FIRST boot the phone after the firmware installation has succeed.
→ Grab GAPPS corresponding to your android version. (I recommend miuiandroid.com's GAPPS lite, as they removed all unuseful stuff) Place the .zip on the sd-card. Place language enabler.zip on the sd-card as well
→ Install a TWRP v2.4.4.0 recovery
→ Boot into recovery. Install GAPPS.zip. Install language enabler .zip as well
→ Reboot. TWRP will ask you if you want ROOT access. Entirely up to you! For the language enabler to work, you must do a device reset. Relax, GAPPS should be there after the reset.
7. Done! If you want root access, check root guide on top. You can remove Chinese system apps with Uninstall Master. Weather, baidu, and Chinese market won't work outside china anyway. REQUIRES ROOT!
OLD METHOD
Install any Huawei stock firmware, regardless of version (even from custom rom) B229 is a bit different. See "FAQ" at bottom.
This will delete everything on your phone's internal memory, and you will loose root.
Your phone must be rooted for this method to work (replacing/modifying build.prop. Check FAQ about build.prop if you have any questions)
1. Grab firmware (UPDATE.APP), recovery.img and build.prop (Both included in attached FlashPacks) for desired firmware version. Links in buttom of this guide.
2. Place UPDATE.APP on your SD-card. The file structure MUST be: (Root of SD-card) dload\UPDATE.APP
3. Install recovery through the steps above.
4. Download and open "Universal Android AIO Flasher Tool$" to replace build.prop:
→ A: Open desired build.prop in notepad, notepad++ or similar. Copy everything.
→ B: Connect phone in ADB mode (See "First of all" ↑ ).
→ C: Open "Universal Android AIO Flasher Tool$". Go to "Build.prop Editor"-tab
→ D: Insert what you copied into the empty text field.
→ E: Click the "save" button and then "Flash to device". You must grant access with SuperSU (or whatever superuser access management tool) on your phone.
→ F: If successful, you must click "Reboot device" for the changes to take effect. Let the phone reboot.
Manually: "adb pull /system/build.prop" to get the build.prop from your phone.. "adb push build.prop /system/build.prop" to push build.prop to device. "adb reboot" to reboot it (Must be done)
5. After reboot, check "Settings -> About" to check if stated firmware version has been changed to the one you want.
6. Turn off your phone. Restart while pressing volume up + volume down. The firmware flashing procedure will start. If not, you have done something wrong.
7. Done.
Install custom firmwares/ROMs (Root not required)
- This will delete everything on your phone's internal memory. Backup stuff you want to keep.
- All custom ROMs i know is pre-rooted, so nothing to worry about there!
- You will need custom recovery for this to work. Look above.
Depending on firmware, GAPPS (Google Apps) might not be included and must be flashed afterwards if it's wanted. I recommend miuiandroid.com's GAPPS lite, as they removed all unuseful stuff
1. Download desired 3rd-party firmware, it must be a CWM/TWRP flashable .zip. Place it on you memory card. If you're flashing GAPPS aswell, place gapps.zip on the memory card too.
2. Reboot you phone to recovery.
3. Wipe everything the custom firmware needs to have wiped. Generally cache, dalvik and user data.
4. Flash the firmware .zip. Wait for everything to finish!
6. Restart the phone. It will use alot of time the first time. If it uses more than, let's say.. 7 minutes, something is wrong (bootloop).
You can eventually try these steps:
→ Wipe cache, dalvik and userdata with CWM.
→ If this does not solve the problem, check the files and reflash. If it still bootloops: The files don't work with U9200.
If you are going to flash GAPPS, now after the first boot is the time to do it. Boot into recovery, then flash the GAPPS .zip corresponding to your firmware version.
7. Restart and enjoy!
"Ey, Olav! Do you know any other useful stuff I can do to my rooted phone?"
These settings can be edited by using the app Root Browser, for instance.
Boost GPS performance by changing default server to the respective one for your country. Should make the GPS faster and more precise.
The file holding this information is located in: /system/etc/gps.conf
Find respective gps server (NTP) here: http://www.pool.ntp.org/zone/@
I'm from Norway. My customized gps.cfg looks like this:
Code:
NTP_SERVER=no.pool.ntp.org
XTRA_SERVER_1=http://gllto.glpals.com/4day/glo/v2/latest/lto2.dat
XTRA_SERVER_2=http://gllto.glpals.com/4day/glo/v2/latest/lto2.dat
XTRA_SERVER_3=http://gllto.glpals.com/4day/glo/v2/latest/lto2.dat
# SUPL_HOST=supl.google.com
# SUPL_PORT=7276
Fix GPS log bug found in some Huawei ROMs. There seem to be a bug, where stock Huawei ROMs will create huge unnecessary GPS logs, that eventually will fill your entire SD card with trash! (We are talking several 100 MB's of logs!).
Disable log keeping by editing a setting in this file: /system/etc/gpsconfig.xml.
Edit: "cLogEnabled" from "true" to "false". Then delete all the logs in: system/data/gps/log.
FAQ
Install latest baseband version
Why? Baseband / radio.img is the software controlling everything that has to do with signal. Newer baseband versions can boost your performance + make battery last longer. It might make things worse, but generally newer means better.
How? There is no way to extract radio.img from Huawei firmware at this point. So only way to do this is through flashing a stock firmware from Huawei containing the baseband (radio.img) version you want. (New firmware sometimes includes updated baseband version). If you want custom firmware/ROMs you can flash them over it, baseband version will remain/ radio.img/baseband is not included in custom firmwares/ROMs. Flashing any Huawei firmware will replace baseband with its own version.
For flashing procedure, see "Install any Huawei stock firmware, regardless of version you are on (even from custom rom)"
GAPPS
Why? You want Google applications, but it's not included in the ROM you've flashed.
Which? GAPPS is made for every android version (ICS=4.0.x, JB=4.1.x/4.2.x). Make sure you pick the right one! (Links in download section). I recommend OpenGapps Pico. Heavier GAPPS will make your device much slower.
How?
- Download GAPPS.zip, move it to your memory card.
- Use custom recovery such as CWM or TWRP to flash it.
Remember:
- Has to be done after the ROM is flashed (obviously) and it's recommended to boot the ROM once before flashing GAPPS.
- All Huawei stock firmwares (Except Chinese versions) have this preinstalled.
What does "Root"/"Root access" mean?
- System files is not editable on stock firmware. Editing these can potentially make your phone into a brick. To remove these restrictions follow the steps in my guide.
- Rooting will in most cases destroy warranty!
- MIUI, CM and other custom ROMs are pre-rooted[/I]
What is build.prop?
- This is a text file stored on your phone, which tells the phone about what firmware version it has + some other stuff.
Why replace build.prop?
Build.prop stores lots of settings and info about your phone. Changing it is most commonly used for tricking the upgrade procedure to think the firmware on the phone is compatible with the update.
- Huawei firmware updates is restricted to some few firmware versions. But they have made a "Intermediate Pack" which will flash from ANY stock huawei ROM. All huawei ROM's will flash from this intermediate pack without the need of changing build.prop. Think of "Intermediate Pack" as a intermediary for getting the firmware version you want.
- If you come from a custom ROM, and intermediate pack won't flash (verification fail in recovery), you must change build.prop to any stock huawei build.prop for it to work.
How to replace build.prop?
Phone must be rooted!
NB: There's a chance your custom ROM won't boot because of using stock Huawei build.prop with it. In case of updating to Huawei stock firmware, be smart. Flash stock recovery, and add the update.app to SD card BEFORE you change build.prop!
- Get desired build.prop (included in my "FlashPack" files.
- Download Universal Android AIO Flasher Tool$, by "fonehacker".
- Plug your phone in ADB mode. Open the tool above. Go to build.prop tab. Open your recovery. Press save. Then flash it to your device.
- Device must restart for the changes to work. The tool will ask you about this, and you press YES.
(Alternative: Take a custom rom zip (LineageOS for instance), open zip without unzipping (Use 7-zip), delete all the folders in the /system, including build.prop. Drag desired build.prop to /system folder. Flash this file from a custom recovery, such as CWM or TWRP. No root needed.)
What is boot.img for?
- It's a file that get flashed to your boot partition on the phone. This file is managing the booting process of your phone. This file is included in all ROM's, therefore there is no need for manual flashing. If the boot partition get's damaged in any way, flashing a boot.img made for the same firmware can fix it. Don't try boot.img from different firmwares/android version!
Why is boot.img included in your FlashPacks?
- ROM developers might use it for developing new and better roms. If you just are updating your phone, you will have no use for it.
What is EmUI?
- Huawei is making a custom version of android for their phones. This project is named Emotion UI, EmUI in short.
What is latest firmware(s) for my U9200?
- The download section always contains latest version of Huawei firmware. If there is a new version I have not listed, tell me
What's the difference of "boot recovery" and "flash recovery"?
Boot recovery will make your phone boot from the recovery file stored on your computer (Through fastboot, your phone is connected with usb)
Flash recovery will replace what ever recovery you already have on your phone.
Can I remove/change battery?
- It's not meant to be possible as there is no plastic cover you can remove without disassemble the phone. There is a small bolt underneath the SD-card cover. I think that's the place to start if you want to open it. This will most certainly break the warranty. If the phone's hardware misbehave in any way you should contact Huawei or the store you bought it from.
Guides:
→ How to split Huawei firmwares (get boot.img and recovery.img for a given Huawei firmware): http://madmodder.co.uk/huawei_gener...recovery-images-from-most-huawei-firmware.htm
→ How to root and install custom ROM and recovery, by lee140685: https://forum.xda-developers.com/showpost.php?p=33621360&postcount=310
→ Firmwares with flashing guide, by arkedk: https://forum.xda-developers.com/showthread.php?t=2075028
→ How to setup and use fastboot, by demkantor (Absolutely noob proof): https://forum.xda-developers.com/showthread.php?t=2277112
→ How to install and set up fastboot and adb (Android SDK), by Team Android: http://www.teamandroid.com/2012/07/30/how-to-set-up-adb-fastboot-with-android-sdk/
<.< Download links is found in a separate post - Click the image below >.>
Something's missing? You got feedback? Updates I've not included yet? Anything else? Reply to this thread.
Please press THANKS if this guide has helped you
Great job,man! Thanks!:good:
This is THE GUIDE! :good:
Re: [GUIDE] Huawei Ascend P1 U9200 COMPLETE
Thanks Olav.
I suksessfulle installed muiu english v. On my p1.works Great.
Sent from my HUAWEI U9510E using xda app-developers app
gifr87 said:
Thanks Olav.
I suksessfulle installed muiu english v. On my p1.works Great.
Sent from my HUAWEI U9510E using xda app-developers app
Click to expand...
Click to collapse
Nice No problem!
Any Non-Huawei screenshots for EMUI? I mean uploaded by users
How's it working generally? Better than stock 4.0.3? Any bugs?
Thx
Great All-In-One for the Ascend P1... Was thinking about doing the same, but then I saw you already did it ...
Great work Olav!
arkedk said:
Great All-In-One for the Ascend P1... Was thinking about doing the same, but then I saw you already did it ...
Great work Olav!
Click to expand...
Click to collapse
Thanks
New EmUI beta, chinese version. B528
Mirror: https://mega.co.nz/#!7oRRlZ5Z!f8jFjj_HgVw1OWRLCbg4vgVloQNgRgNsNHv_f1C-wfY
FlashPack (Includes build.prop, recovery.img and boot.img): https://mega.co.nz/#!O9wjXByA!VzMAVV9zhmC70K9VI7jhwWLlDAs8CnBCvnfrAnVaRyc
o-l-a-v said:
Thanks
New EmUI beta, chinese version. B528
Mirror: https://mega.co.nz/#!7oRRlZ5Z!f8jFjj_HgVw1OWRLCbg4vgVloQNgRgNsNHv_f1C-wfY
FlashPack (Includes build.prop, recovery.img and boot.img): https://mega.co.nz/#!O9wjXByA!VzMAVV9zhmC70K9VI7jhwWLlDAs8CnBCvnfrAnVaRyc
Click to expand...
Click to collapse
perfomance wise, is emui better to miui?
areankim said:
perfomance wise, is emui better to miui?
Click to expand...
Click to collapse
When I tried the jelly bean emui, I thought it was a bit of a ripoff of MIUI. I like MIUI better.
Sent from my U9200 using xda app-developers app
Guys, jst flash to EMUI B528 custom without gapps, and dowlonad the 4.1.x gapss 20121011 but after i flash it, nothing appear.
then i tried the prev version and 20121130, stll nothing. Weird,
areankim said:
Guys, jst flash to EMUI B528 custom without gapps, and dowlonad the 4.1.x gapss 20121011 but after i flash it, nothing appear.
then i tried the prev version and 20121130, stll nothing. Weird,
Click to expand...
Click to collapse
You rooted before flashing GAPPS?
The "power bar"
I flashed B229 to a U9200, it had originally B103 which had been updated to 105. manually edited the build to B226 before updating with cwm. Everything is working fine no problems. Only couple of things are missing. The "power bar" which i use to control wifi, BT etc. power on and off in the notification menu (or what ever it is called, the menu that appears when swiping down from the upper edge) is missing and it is quite handy and I'm used to it. Other is the missing boot animation which i knew will be missing after update but did not care about that originally since other bigger issues in the B10x FWs forced me to update to B229. But if easy to apply and anyone knows the way to restore the animation (restore the looks as much "stock" as possible) i would appreciate. But the "power bar" would be very important, anyone know how to restore that? I have messed around with Android a bit and have installed and used custom ROMs and rooted several phones so using the basic root / fastboot / adb functions is no problem even though I'm no Android/Linux expert.
Thanks in advance for your help!
And thank you Olav for the very nice compilation thread for U9200.
JJVilzu said:
I flashed B229 to a U9200, it had originally B103 which had been updated to 105. manually edited the build to B226 before updating with cwm. Everything is working fine no problems. Only couple of things are missing. The "power bar" which i use to control wifi, BT etc. power on and off in the notification menu (or what ever it is called, the menu that appears when swiping down from the upper edge) is missing and it is quite handy and I'm used to it. Other is the missing boot animation which i knew will be missing after update but did not care about that originally since other bigger issues in the B10x FWs forced me to update to B229. But if easy to apply and anyone knows the way to restore the animation (restore the looks as much "stock" as possible) i would appreciate. But the "power bar" would be very important, anyone know how to restore that? I have messed around with Android a bit and have installed and used custom ROMs and rooted several phones so using the basic root / fastboot / adb functions is no problem even though I'm no Android/Linux expert.
Thanks in advance for your help!
And thank you Olav for the very nice compilation thread for U9200.
Click to expand...
Click to collapse
Check in the Display settings if the "Notification settings" option is checked. See screenshot from the B226 ROM attached. I hope it's still there?
Boot animation can changed with the AIO flasher tool.
Krizzii said:
Check in the Display settings if the "Notification settings" option is checked. See screenshot from the B226 ROM attached. I hope it's still there?
Click to expand...
Click to collapse
I checked, it's not there in B229 wtf
JJVilzu said:
I flashed B229 to a U9200, it had originally B103 which had been updated to 105. manually edited the build to B226 before updating with cwm. Everything is working fine no problems. Only couple of things are missing. The "power bar" which i use to control wifi, BT etc. power on and off in the notification menu (or what ever it is called, the menu that appears when swiping down from the upper edge) is missing and it is quite handy and I'm used to it. Other is the missing boot animation which i knew will be missing after update but did not care about that originally since other bigger issues in the B10x FWs forced me to update to B229. But if easy to apply and anyone knows the way to restore the animation (restore the looks as much "stock" as possible) i would appreciate. But the "power bar" would be very important, anyone know how to restore that? I have messed around with Android a bit and have installed and used custom ROMs and rooted several phones so using the basic root / fastboot / adb functions is no problem even though I'm no Android/Linux expert.
Thanks in advance for your help!
And thank you Olav for the very nice compilation thread for U9200.
Click to expand...
Click to collapse
Read Dddrko's post on page 13 at http://forum.xda-developers.com/showthread.php?t=1694228&page=13, he explained how to restore toggles.with this metod u will also restore original bootanimation.
Hello,
I own an huawei u9200
I would like to flash the B229 ROM on my device running B102.
I find this thread very interesting however I have a problem at the very first step.
I can't install fastboot usb drivers
I've been trying to follow the guide you linked at the top of your post, I had a slight issue with ADB Drivers as well,
I could not make those Google USB Drivers downloaded through Android SDK work, I would get the error telling me those drivers are not developed to work with windows x64. But after checking with the command prompt, it turns out that the drivers I needed were already installed and the device is detected as ADB Device.
Back on my current issue:
I understand that I have to shut down my phone and switch it on while pressing both volume up and volume down and after turning it on, I have to plug it to the computer through USB cable. My phone does turn on in download mode, however when I connect it to the USB my computer doesn't detect anything.
Is the screen I am getting the right screen or should I switch the phone on with a different shortcut?
How do I get my computer to detect my phone when I switch it on with the volume+&- buttons?
Which are the correct fastboot drivers to install and where can I download them?
I hope to receive assistance as soon as possible.
Thank you.
EDIT:
I've managed to reboot correctly by using ADB command prompt (typing ADB reboot fastboot)
Now, I'm trying to root and in the command prompt I get this error:
"cannot load 'cwm_touch_recovery_viva_beta.img': No error"
EDIT:
Supersu installed.
Now when attempting to edit the build.prop I get a error message
I check the Concole and I see "Remount failed: Operation not permitted
But I granted root access when prompted. Any Idea?
EDIT:
Tried 39 times until I got it successfully.
And don't ask me how. It's beyond me.
Checked About and version is good.
Now rebooted and "Version list verify fail!"
WHY?
I've checked the build.prop and it is flashed,
I've flashed the 229recovery.img
I reboot and it gives me "Version list verify fail!"
What could have I done wrong?
DenesS said:
I've checked the build.prop and it is flashed,
I've flashed the 229recovery.img
I reboot and it gives me "Version list verify fail!"
What could have I done wrong?
Click to expand...
Click to collapse
Try with the build.prop from b226, avaible here: http://openbuildprop.scheffsblend.com/mfg/Huawei (copy -> paste into notepad, save as build.prop)
o-l-a-v said:
Try with the build.prop from b226
Click to expand...
Click to collapse
Ok, this makes sense, it probably wouldn't like to update to a version which is already installed.
This wasn't clear on the tutorial, thanks for the hint.
I'm trying now
EDIT:
Nope, still "Version list verify fail!"
Even though I checked in the "About" and the version shown is B226, which means the .prop was correctly flashed.
So what could the problem be?
EDIT:
Should I also try flashing the B226 recovery?
Do you have a link for any download page?
Can I flash it directly through CWM? CWM wants a root://Update.zip can I put my UPDATE.APP into a zip archive and flash it or does it work differently?
People have had problems updating to B229 with the build.prop i extracted from the B229 fw.
There is simply a little difference at this line:
Code:
ro.build.display.id=V100R001C00B229
It should be:
Code:
ro.build.display.id=U9200-V100R001C00B229
Build.prop from all earlier firmwares (Exept B226) including EmUI betas and stables have the "U9200-"-part before product version on this line.
This is a mistake by Huawei, not me :good:
Updated the FlashPack for B229, new link from mega in first post!
Hi All this is just a quick tutorial to help you all root your devices, on later firmwares
This 100% works ive done it over and over without any problems. I am currently on october patch latest firmware for my A105FN. As you may know Samsung have now added extra security meaning even if you have already unlocked your bootloader after you patch the firmware with magisk, flash patched firmware and reboot you will be greeted with that dreadfull message, Only official binaries allowed and your device will be locked and wont boot untill you reflash stock firmware again. The below will help get you out of the prenormal kg state, and save's you a 7 days waiting period as we dont have any TWRP available for our device at this time. Also note due to the extra security magisk cant be flashed with the whole firmware no more, as each time you flash the firmware your back at square 1.
Note: You will need 7-zip - google is your freind
1. Download odin: https://odindownloader.com/download/odin3-v3-13-3.
2. download the latest stock firmware for your device via SamMobile
3. Download latest Magisk Manager - https://www.google.co.uk/amp/s/forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445/amp/
4. Flash latest firmware via odin and let device boot up and finish setting up.
5. Grab Your Firmware AP_A105FXXXX.tar.md5 remove the md5 so its a tar file makes it easier to work with. Copy it to your device storage.
6. Install latest magisk manager, and open check advanced settings to make sure recovery is checked, select install image / patch image and select the AP file you put on your device, magisk will patch and save as magisk_patched on your internal storage. Copy this back to your pc and extract it.
7. Download this https://forum.xda-developers.com/attachment.php?attachmentid=4818715&d=1568308074 thanks to @droidzer1 and extract the vbmeta.img.
8. Make a new folder on you pc it's temporary so you know where your files are. From the Ap magisk_patch.tar you extracted, copy the boot.img, recovery.img, and the downloaded vbmeta.img from step 7. And place them in the new folder you created, using your mouse select all 3 and right click select 7-zip add to archive, select tar format and name it magisk.tar.
9. Now we have all the files ready back to your device, if your bootloader is already unlocked skip this step and move to the next. For those that havent unlocked there bootloader go to settings - about phone - Software Information - tap multiple times on "Build number" - This will open developer option.
Now in settings at the end, you will have new option "Developer options" - look for OEM unlocking - Enable it, if the OEM switch is not there proceed to step 10. If it is and you enabled it it might ask you to factory reset if not it will be this way to complete the unlock bootloader.......
switch off your device and reboot to download mode.
To put device in download mode - Press Volume Up & then Press Volume Down (Keep holding both) and connect device to PC with USB cable
When device start to download mode, long press volume up to unlock the bootloader. This will wipe your data and automatically reboot.
10. Remove any account you have on your device go to settings, look for time and date automatic time zones, turn it off and set date back 8 days from now (example 30th today change date to 22nd) restart device. Now go straight back into automatic time zones settings and turn it back on. Again reboot device, when device reboots turn it off. You can now enter download mode and it should say checking instead of prenormal that means you good to go. Those of you that had no OEM switch in developer mode please now check.... if it's there enable it and go back to step 10 unlocking bootloader then proceed to step 11.
11. Open odin and select in the ap tab the magisk.tar you created earlier. Plug in your usb whilst holding vol-up and vol-down together to boot into download, press vol-up to proceed. Press start on odin and soon as it finishes and device reboots and you see the bootloader message hold power and vol-up until into stock recovery, select wipe factory reset then select reboot device, this the same as soon as you see bootloader unlocked message hold power and the vol-up together this time count to 7.... and release. Phone wont boot it will go blackscreen and reboot, dont worry this is normal, again do the exact same at bootloader unlocked msg screen hold power and vol-up count to 7... release, now phone will boot and you can set it up.
Note: you will need to reinstall magisk manager and on 1st open it will ask do to additional setup, let it do its thing, then device will reboot,
Remeber every time your device reboots you will have to do the power and vol-up to boot system with root.
I hope this guide help you and a big thank you to @afaneh92 for his original guide
thnaks man
how do i install twrp?
if it is possible, can i flash GSI?
tttt7hhhhjjjk said:
thnaks man
how do i install twrp?
if it is possible, can i flash GSI?
Click to expand...
Click to collapse
No the twrp that was made for our device, wont work with new versions of magisk, or any newer firmware we are going to have to wait until the the new kernel source is released by samsung unfortunatly, its impossible to say when or if they do.... so its just root for now.
mikeyb123 said:
No the twrp that was made for our device, wont work with new versions of magisk, or any newer firmware we are going to have to wait until the the new kernel source is released by samsung unfortunatly, its impossible to say when or if they do.... so its just root for now.
Click to expand...
Click to collapse
thanks for the fast reply man :good:
I gave up rooting this phone, ended up bootloop 3 times and always has to flash it to get the phone working again
timba123 said:
Any chimeratool tricks for no oem unlocking in developer options? On a102u1
Click to expand...
Click to collapse
no.. chimera tool cant unlock the bl on usa variants
hello Thanks for this method but not working after install again magisk manager , say app magisk is not installed and not root
When I was creating the magisk_patch file with magisk manager go to advanced settings and check recovery mode
is it correct?
Hi guys I know their are threads how to do this but they are all over the place, If you'd like a complete tutorial, that will get your 2020 MOTO G Stylus phone rooted without any errors let me know.
Edit: It looks like people are interested so here goes. The tutorial below is for the 2020 version I tested on Android 10 on two variants. This method once followed correctly will take no more than 30 min tops. Not sure if this will work on updated versions but you could try at your own risk. If this helped you leave a like, if you have any questions let me know.
prerequisites:
PC (duh lol)
Fully Charged Device
Motorola Account (for bootloader unlock purposes)
adb fastboot installed (take note of your folder location especially the platform-tools folder
motorola drivers (link in step 5 if drivers don't install correctly after connecting phone)
Tutorial:
Unlocking bootloader
1. first step is to unlock bootloader(all data will be erased) for this you will need your unlock key
2. go to settings, about phone build # hit a bunch of times to enable developer options
3. once enabled go to developer option enable OEM unlock, disable automatic update (do not update), and enable USB debugging.
4. while phone is on plug into pc to allow drivers to install, also allow usb debugging when prompted. go to where you have adb installed and go in the platform tools folder (this is where I do everything on my phones without errors) hit shift+right click and choose "open command window here" type in "adb devices" without quotes and check if the device is present.
5. now to test if you have fastboot drivers power off phone, then hold power+volume down to enter fastboot mode, plug phone into your computer and repeat step 4 this time typing "fastboot devices" if your phone shows up move on to next step if not download Motorola drivers and install then repeat this step. You can get the driver here and install https://combofile.com/index.php?a=downloads&b=file&id=3396.
6. once your device is detected its time to unlock bootloader, go to https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a sign in and follow the steps, they are simple and straight forward so I won't list them here. Once unlocked restart your phone, set up and proceed to below steps.
Rooting
1. with bootloader unlocked time to get root. download the latest magisk manager (23 I believe) let it install and power off your phone we will use it later. We will be getting the specific boot image for your device through temporary twrp.
2. go to https://forum.xda-developers.com/t/recovery-unofficial-twrp-3-5-0.4155041/ and download TWRP credits to @vache. Place the file in your platform-tools folder.
3. enter fastboot mode (by now it should be second nature) and plug into pc, verify fastboot device connected, by opening command window again in platform-tools folder
4. once verified type the following command without the quotes "fastboot boot twrp-3.5.0-0-rav-sofia.img" be patient, when it boots into twrp, cancel any password creation.
5. go to backup and select storage, choose a sd card, do not decrypt or do anything besides what I'm saying here. it will take you back to the beginning after sd card selected as storage, click backup and select only boot at the very top and creat backup. once done go out to twrp main menu and hit reboot, select "reboot system"
6. now to patch boot, open magisk manager and go to install, it will then give you the option to locate and patch boot.img, however we will be going into twrp backup on your sd card and locate boot.emmc.win (not the other two) once selected hit lets go on Magisk and allow it to patch. your patched boot.img will be in a download folder on your internal memory. Copy that file to your computer and then again move it to platform-tools folder
7. power off device and enter fastboot mode for the final time connect to pc, open command window in platform-tools folder and type the following command without the quotes "fastboot flash boot nameofbootfile.img" hit enter and allow to flash, once completed type "fastboot reboot" your device should now reboot, don't worry if it takes slightly longer than usual.
8. finally go into the magisk manager and let it complete its setup, it should reboot one more time and boom, you have root, remember to use magisk hide, That's it all set. If followed correctly this should only take about 30 min to a hour.
Shucks! I thought this was a tutorial.
zapjb said:
Shucks! I thought this was a tutorial.
Click to expand...
Click to collapse
I got you, updated tutorial up. Let me know if it helps.
If we have updated to Android 11, such as myself, and want to use the tutorial... Couldn't we just BACKUP (which is needed to root anyways), and do a FACTORY SETTINGS RESET to bring our OS back to Android 10?
Killabee0311 said:
If we have updated to Android 11, such as myself, and want to use the tutorial... Couldn't we just BACKUP (which is needed to root anyways), and do a FACTORY SETTINGS RESET to bring our OS back to Android 10?
Click to expand...
Click to collapse
I'm pretty sure a factory reset would restore to 11 not 10. As the 11 update replaced the 10 OS altogether.
Killabee0311 said:
If we have updated to Android 11, such as myself, and want to use the tutorial... Couldn't we just BACKUP (which is needed to root anyways), and do a FACTORY SETTINGS RESET to bring our OS back to Android 10?
Click to expand...
Click to collapse
I'm not sure if a factory reset would take the OS back to 10, you might need to search around for downgrade options. I'd advise anyone not to update to android 11, 10 is great especially with root. I have magisk pass safteynet, and even able to play pokemon go with gps spoof and smali patcher.
kgalv419 said:
I'm not sure if a factory reset would take the OS back to 10, you might need to search around for downgrade options. I'd advise anyone not to update to android 11, 10 is great especially with root. I have magisk pass safteynet, and even able to play pokemon go with gps spoof and smali patcher.
Click to expand...
Click to collapse
I'm on stock and want to flash this rom. I need to start from scratch. I need to unlock the bootloader, I got the email from Motorola months ago, but haven't had time to figure out how to use fastboot. It's been years since I used it. I'm also on Android 11 and I need to find out how to downgrade to Android 10. Any advice is appreciated.
I have an annoying Security Update that keeps popping up saying that I need to restart my device, and that it only takes 90 seconds. I'm afraid that if I restart my device, the update will install and I won't be able to downgrade to Android 10 from 11, and then I 'll be stuck with this stock rom. Can I disable this pop up?
New Version : RPRS31.Q1-56-9-9 Includes Updates of Android Security Patches through 1 October 2021.
I have not turned iff my device or restarted it since the pop up for the update.
EpicSaga said:
I'm on stock and want to flash this rom. I need to start from scratch. I need to unlock the bootloader, I got the email from Motorola months ago, but haven't had time to figure out how to use fastboot. It's been years since I used it. I'm also on Android 11 and I need to find out how to downgrade to Android 10. Any advice is appreciated.
I have an annoying Security Update that keeps popping up saying that I need to restart my device, and that it only takes 90 seconds. I'm afraid that if I restart my device, the update will install and I won't be able to downgrade to Android 10 from 11, and then I 'll be stuck with this stock rom. Can I disable this pop up?
New Version : RPRS31.Q1-56-9-9 Includes Updates of Android Security Patches through 1 October 2021.
I have not turned iff my device or restarted it since the pop up for the update.
Click to expand...
Click to collapse
Ok if you have your unlock code you should still be able to unlock bootloader. However the first thing you need to do is enable your developer options and enable OEM unlock, enable USB debugging and disable automatic updates that should stop updates you can also go on app info when you get the notification and disable notifications for system updates. If you have an unlock bootloader you should be able to root even android 11
kgalv419 said:
Ok if you have your unlock code you should still be able to unlock bootloader. However the first thing you need to do is enable your developer options and enable OEM unlock, enable USB debugging and disable automatic updates that should stop updates you can also go on app info when you get the notification and disable notifications for system updates. If you have an unlock bootloader you should be able to root even android 11
Click to expand...
Click to collapse
Thank you very much. How do I disable automatic updates and how do I go on app info to disable notifications for system updates? Now a message is on the same screen that says that if I don't restart my phone by the 21st, it will automatically update it.
For downgrading to android 10:
1. Grab the moto flash tool from here
2. Grab the a10 firmware from your device here
3. Unzip the moto flash tool and put the firmware zip in the folder called firmware
4. Plug your device in to your pc in bootloader mode
5. Start the moto flash tool and follow the instructions
(Unlocked bootloader required)
EpicSaga said:
Thank you very much. How do I disable automatic updates and how do I go on app info to disable notifications for system updates? Now a message is on the same screen that says that if I don't restart my phone by the 21st, it will automatically update it.
Click to expand...
Click to collapse
Pretty sure theres a setting in developer options to turn off automatic updates.
ph4n70m-404 said:
Pretty sure theres a setting in developer options to turn off automatic updates.
Click to expand...
Click to collapse
Yes, it's off, and it's been turned off, but I still got a message from Motorola that if I don't restart my phone so that the security patch can update, it will restart automatically on the 21st( a few hours from now).
EpicSaga said:
Yes, it's off, and it's been turned off, but I still got a message from Motorola that if I don't restart my phone so that the security patch can update, it will restart automatically on the 21st( a few hours from now).
Click to expand...
Click to collapse
I don't know of any solution to this but you should be able to update and keep magisk if you let it do the ota update then use the magisk manager to flash to the other slot.
ph4n70m-404 said:
Pretty sure theres a setting in developer options to turn off automatic updates.
Click to expand...
Click to collapse
I already turned it off, but I still got the notification for the update.
ph4n70m-404 said:
I don't know of any solution to this but you should be able to update and keep magisk if you let it do the ota update then use the magisk manager to flash to the other slot.
Click to expand...
Click to collapse
I don't have magisk, my phone ia stock. Can I put magisk on my phone without unlocking the bootloader? I need some assistance with unlocking it.
EpicSaga said:
I already turned it off, but I still got the notification for the update.
Click to expand...
Click to collapse
I got a notification again today saying that it will update today if It don't do it manually.
EpicSaga said:
I don't have magisk, my phone ia stock. Can I put magisk on my phone without unlocking the bootloader? I need some assistance with unlocking it.
Click to expand...
Click to collapse
Assuming you have a non Verizon or any other oem that blocks unlocking the bootloader follow the steps from the original post:
(step one makes no sense they wrote it kinda weird)
2. go to settings, about phone build # hit a bunch of times to enable developer options
3. once enabled go to developer option enable OEM unlock, disable automatic update (do not update), and enable USB debugging.
4. while phone is on plug into pc to allow drivers to install, also allow usb debugging when prompted. go to where you have adb installed and go in the platform tools folder (this is where I do everything on my phones without errors) hit shift+right click and choose "open command window here" type in "adb devices" without quotes and check if the device is present.
5. now to test if you have fastboot drivers power off phone, then hold power+volume down to enter fastboot mode, plug phone into your computer and repeat step 4 this time typing "fastboot devices" if your phone shows up move on to next step if not download Motorola drivers and install then repeat this step. You can get the driver here and install https://combofile.com/index.php?a=downloads&b=file&id=3396.
6. once your device is detected its time to unlock bootloader, go to https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a sign in and follow the steps, they are simple and straight forward so I won't list them here. Once unlocked restart your phone, set up and proceed to below steps.
EpicSaga said:
I don't have magisk, my phone ia stock. Can I put magisk on my phone without unlocking the bootloader? I need some assistance with unlocking it.
Click to expand...
Click to collapse
you can install magisk manager with bootloader locked but there is no sense in installing it on locked bootloader, because when you unlock your bootloader your devices will be factory reset, if you checked my instructions you will see that magisk manager is needed to patch boot.img that you will get from TWRP backup. You seem a bit green about the whole fastboot process, if that's the case I'd advise you to do a little reading up on adb fastboot, which needs to be installed to unlock your bootloader, if you go in blind you can brick your device and I wouldn't want that.
kgalv419 said:
...I'd advise you to do a little reading up on adb fastboot, which needs to be installed to unlock your bootloader, if you go in blind you can brick your device and I wouldn't want that.
Click to expand...
Click to collapse
Sometimes it's been a couple years between me rooting phones. When I come back to root another phone I read & read & read & read some more here. And I have in case the shtf a back up phone to be safe.
EpicSaga said:
I'm on stock and want to flash this rom. I need to start from scratch. I need to unlock the bootloader, I got the email from Motorola months ago, but haven't had time to figure out how to use fastboot. It's been years since I used it. I'm also on Android 11 and I need to find out how to downgrade to Android 10. Any advice is appreciated.
I have an annoying Security Update that keeps popping up saying that I need to restart my device, and that it only takes 90 seconds. I'm afraid that if I restart my device, the update will install and I won't be able to downgrade to Android 10 from 11, and then I 'll be stuck with this stock rom. Can I disable this pop up?
New Version : RPRS31.Q1-56-9-9 Includes Updates of Android Security Patches through 1 October 2021.
I have not turned iff my device or restarted it since the pop up for the update.
Click to expand...
Click to collapse
Re: bootlock unlock code email
I went on the Lenovo/Motorola website just yesterday and input the long 5-line code from my phone (required) from SDK platform. Once I did this, the website replied that I will receive email with a unique 20-character bootloader unlock code (this is the part you should check again). Instead of getting a code, the email asked that I first "verify my email", so I followed the directions, clicked the link, the link brought me to their website and I was able to verify my account. Once that happened, the page just kinda froze. So I repeated the process and when I clicked the "verify email" button, it brought me again to the website but thus time to my profile page. There was no Bootloader Unlock Code, nor was I emailed the code as assured as I was, as per their website suggests. I repeated the process a 3rd time but the same thing happened. And when I tried to went back #2 + #3 times, I input all the information again, clicked on the "send email" link (where they email you the 20-character code) I never received any additional emails. I only received 1 email (the first time I input this into their website). So, the site will only work 1 time per unique phone (serial). I called customer support and got nowhere! I have Metro by T-Mobile Motorola Moto G Stylus XT2043-4. I hope you see this and please let me know if you are able to unlock or get a email code as promised (or not). And if you have any information on how else to solve this issue, please let me know. I hope this helps & my apologies for being a bearer of bad news. If I solve this issue, I will respond back.
The procedure for installing GSI firmware is described. Because everything is just beginning, some specific features of the phone may not work, which will need to be worked on in order to make universal patches that will appear in future updates of these firmware. To do this, it is advisable for users to describe all their experience in using to this topic, what works and what does not, wishes, etc.
Spoiler: Installation instructions
Only arm64 / Android 12 and newer firmware versions are suitable for installation with full VNDK (VNDK lite - not tested)
Save all important data from your phone (contacts, photos, videos, etc.) to your PC
Unlock the bootloader if you haven't already
Updating to the latest factory firmware version of your phone region (see instructions and links in the header)
Download the GSI firmware we are interested in on the PC and unpack it, if necessary. We must have a file of the form <name_and_firmware_version.img> on our computer. If you do not see file extensions at the end, then turn on the display of extensions in the operating system window settings.
Download and unpack fastbootD. In the unpacked folder of which we put the unpacked firmware image.
Put the phone into bootloader mode (on the off, we hold down "vol -" and "on")
On a PC, open a window with utilities and firmware
Hold Shift and right-click inside the window
In the context menu, select "Open PowerShell window here"
Enter the command cmd and press Enter
Enter the command fastboot erase metadata and press Enter
Enter the command fastboot reboot fastboot and press Enter, wait for the device to reboot in fastbootd mode
Enter the command fastboot flash system_a <firmware_file_name_without_triangular_brackets.img> and press Enter. If the image is from Google, we take the one image named as system.img
In the phone menu, select the "Enter recovery" item (move through the menu with the volume buttons, then turn it PWR.ON button on the line of the desired menu)
Next, select the line "Wipe data / factory reset", click PWR.ON , select "Factory data reset" again and turn PWR.ON. Wait until the end of the operation.
Select and run the "Reboot to system now" menu
Spoiler: Firmware update
Update of the selected firmware should be tracked in the sources where it was downloaded. In this case, when a new version appears, in order to update and save application data, it should be enough to complete only steps 4 to 13 of the installation instructions, skipping step 11
Spoiler: Root
If the selected firmware is supplied without root, and since our boot has remained unchanged from the factory, then we act according to of this instruction. If, after getting the root, we decide to change one GSI firmware to another GSI firmware, then later, it will be enough to install only Magisk Manager to return the root. The root will be deleted after flashing the factory firmware or a separate flashing factory boot.
Original post here
LineageOS 19.1 by AndyYan - passed
AOSP 13 by Google - passed
crDroid 8.8 by Nazim - failed
My Sim is not working, I don't receive SMS and the internet doesn't work, would there be any fix?
fpsRevoltz said:
My Sim is not working, I don't receive SMS and the internet doesn't work, would there be any fix?
Click to expand...
Click to collapse
Region? Operator?
TTTT555 said:
Region? Operator?
Click to expand...
Click to collapse
I live in Brazil And mt Operator is Claro
fpsRevoltz said:
I live in Brazil And mt Operator is Claro
Click to expand...
Click to collapse
check network settings, and try to change 3G to LTE
TTTT555 said:
check network settings, and try to change 3G to LTE
Click to expand...
Click to collapse
I will install the Google GSI 13 to see
TTTT555 said:
The procedure for installing GSI firmware is described. Because everything is just beginning, some specific features of the phone may not work, which will need to be worked on in order to make universal patches that will appear in future updates of these firmware. To do this, it is advisable for users to describe all their experience in using to this topic, what works and what does not, wishes, etc.
Spoiler: Installation instructions
Only arm64 / Android 12 and newer firmware versions are suitable for installation with full VNDK (VNDK lite - not tested)
Save all important data from your phone (contacts, photos, videos, etc.) to your PC
Unlock the bootloader if you haven't already
Updating to the latest factory firmware version of your phone region (see instructions and links in the header)
Download the GSI firmware we are interested in on the PC and unpack it, if necessary. We must have a file of the form <name_and_firmware_version.img> on our computer. If you do not see file extensions at the end, then turn on the display of extensions in the operating system window settings.
Download and unpack fastbootD. In the unpacked folder of which we put the unpacked firmware image.
Put the phone into bootloader mode (on the off, we hold down "vol -" and "on")
On a PC, open a window with utilities and firmware
Hold Shift and right-click inside the window
In the context menu, select "Open PowerShell window here"
Enter the command cmd and press Enter
Enter the command fastboot erase metadata and press Enter
Enter the command fastboot reboot fastboot and press Enter, wait for the device to reboot in fastbootd mode
Enter the command fastboot flash system_a <firmware_file_name_without_triangular_brackets.img> and press Enter. If the image is from Google, we take the one image named as system.img
In the phone menu, select the "Enter recovery" item (move through the menu with the volume buttons, then turn it PWR.ON button on the line of the desired menu)
Next, select the line "Wipe data / factory reset", click PWR.ON , select "Factory data reset" again and turn PWR.ON. Wait until the end of the operation.
Select and run the "Reboot to system now" menu
Spoiler: Firmware update
Update of the selected firmware should be tracked in the sources where it was downloaded. In this case, when a new version appears, in order to update and save application data, it should be enough to complete only steps 4 to 13 of the installation instructions, skipping step 11
Spoiler: Root
If the selected firmware is supplied without root, and since our boot has remained unchanged from the factory, then we act according to of this instruction. If, after getting the root, we decide to change one GSI firmware to another GSI firmware, then later, it will be enough to install only Magisk Manager to return the root. The root will be deleted after flashing the factory firmware or a separate flashing factory boot.
Original post here
LineageOS 19.1 by AndyYan - passed
AOSP 13 by Google - passed
crDroid 8.8 by Nazim - failed
Click to expand...
Click to collapse
hi mate, wich one are you using in your device?
albertordzcz said:
hi mate, wich one are you using in your device?
Click to expand...
Click to collapse
LineageOS
fpsRevoltz said:
I will install the Google GSI 13 to see
Click to expand...
Click to collapse
for some operators need add and save APN manually
I have already tried those GSIs, but none of them seems to work properly the sim card. I can't receive any SMS or Sim Calls. Im From Brazil
SHAdowLOL said:
I have already tried those GSIs, but none of them seems to work properly the sim card. I can't receive any SMS or Sim Calls. Im From Brazil
Click to expand...
Click to collapse
search "volte-fix". repair IMS
Hi, i cannot manage to flash android 13 in any of it's builds, after flashing process appears and android with a no command screen, does any one having the same issue? thanks in advance pals
CherishOS 13.0
fully Working
Anubiros said:
CherishOS 13.0
fully Working
Click to expand...
Click to collapse
Really everything is working with no problem?
Did you find any bug after using it?
Can I install Gapps with adb sideload when I install Lineage OS 12L with this method?
I fail all the times.
Someone can help with installation of gapps in lineage ?
Non stop got error signature verification failed
Do OTA updates work on GSI ROMS, specifically LineageOS?
Anubiros said:
CherishOS 13.0
fully Working
Click to expand...
Click to collapse
OTA updates working?