Redmi Note 5 Pro gets stuck in Mi android logo after flashing any zip from TWRP. I didn't flash lazy flasher though. I flashed zip files like Font zip, launcher zip and all. Is there something else I should be doing ? I have used TWRP to enable camera 2 API plenty of times but this didn't happen. I use TWRP 3.2.1.
Post your problem in respective thread. From where did you downloaded Any zip
Without proper information you don't get proper solutions.
Just reboot to twrp wipe everything and reflash the ROM (previous ROM)
SunilSuni said:
Post your problem in respective thread. From where did you downloaded Any zip
Without proper information you don't get proper solutions.
Just reboot to twrp wipe everything and reflash the ROM (previous ROM)
Click to expand...
Click to collapse
Zip files like Poco Launcher.zip, Google Project Sans font.zip etc. I downloaded these zips from XDA developers site only.
I've got the same problem: using temporary TWRP (haven't used lazyflasher yet) and installing ZIPs ends in the stuck on mi logo. I use TWRP 3.2.3.0 and tried to install Magisk in several versions: 16.0, 16.3 and 16.7, even the manual way by patching the boot image within Magisk Manager. I just like to receive root but want to use Magisk instead of SuperSU. If I'm correct Xposed doesn't work yet, so that might explain why it it stuck at the logo.
MIUI version is 9.6.3.0
how to enable boot sound on note 5 pro
Tischbein said:
I've got the same problem: using temporary TWRP (haven't used lazyflasher yet) and installing ZIPs ends in the stuck on mi logo. I use TWRP 3.2.3.0 and tried to install Magisk in several versions: 16.0, 16.3 and 16.7, even the manual way by patching the boot image within Magisk Manager. I just like to receive root but want to use Magisk instead of SuperSU. If I'm correct Xposed doesn't work yet, so that might explain why it it stuck at the logo.
MIUI version is 9.6.3.0
Click to expand...
Click to collapse
Any solution to avoid it ?
Hello everyone I did a clean flash of
Stable V10.2.1.0.OEIMIXM on my redmi note 5 ai
When I proceed with the setup,I get Google play services stop working and the setup would turn black and blank
I have unlocked bootloader, I flash the stable Rom via twrp
eddieleon7pc said:
Hello everyone I did a clean flash of
Stable V10.2.1.0.OEIMIXM on my redmi note 5 ai
When I proceed with the setup,I get Google play services stop working and the setup would turn black and blank
I have unlocked bootloader, I flash the stable Rom via twrp
Click to expand...
Click to collapse
The same thing happens to me
eddieleon7pc said:
Hello everyone I did a clean flash of
Stable V10.2.1.0.OEIMIXM on my redmi note 5 ai
When I proceed with the setup,I get Google play services stop working and the setup would turn black and blank
I have unlocked bootloader, I flash the stable Rom via twrp
Click to expand...
Click to collapse
Did you do clean flash or dirty flash. I wiped everything and then installed 10.2 miui it is working fine
divyangchauhan said:
Did you do clean flash or dirty flash. I wiped everything and then installed 10.2 miui it is working fine
Click to expand...
Click to collapse
I can confirm it's a clean flash
I use twrp and wipe every single partition
Do format Data (enter yes) then restart TWRP for remounting the partitions, copy the Rom and flash it
eddieleon7pc said:
I can confirm it's a clean flash
I use twrp and wipe every single partition
Click to expand...
Click to collapse
I can also confirm the clean installation. First I wipe all the partitions, then I do format data. then restart in twrp. Then I install the rom and then I start in Twrp and install Magisk or "disable encrip" with Magic included. After this, restart system. Everything seems to go correctly until the moment I log in to the Google account. Just before this the screen turns black and I can not continue the configuration.
Clean installation means Formatting not wiping the Data partition. The other point is to restart the TWRP after installing the Rom and then to install the magisk.
First try to format the Data will end with errors, so restart the TWRP and repeat format Data. After completion restart the TWRP again for remounting the partitions and copy the Rom
A note to everyone. Don't install magisk or remove encryption right after completion of the Rom installation. Reboot in TWRP again and then install magisk or remove encryption, otherwise you face black screen at the stage of Google data input
berda77 said:
A note to everyone. Don't install magisk or remove encryption right after completion of the Rom installation. Reboot in TWRP again and then install magisk or remove encryption, otherwise you face black screen at the stage of Google data input
Click to expand...
Click to collapse
Thank you very much for your answer. Tonight I will try to perform this method.
berda77 said:
A note to everyone. Don't install magisk or remove encryption right after completion of the Rom installation. Reboot in TWRP again and then install magisk or remove encryption, otherwise you face black screen at the stage of Google data input
Click to expand...
Click to collapse
I tried that method and it does not work for me.
eddieleon7pc said:
Hello everyone I did a clean flash of
Stable V10.2.1.0.OEIMIXM on my redmi note 5 ai
When I proceed with the setup,I get Google play services stop working and the setup would turn black and blank
I have unlocked bootloader, I flash the stable Rom via twrp
Click to expand...
Click to collapse
Exactly this is what happens. After that the screen turns black and you can not continue with the initial configuration. Any more ideas?
eddieleon7pc said:
Hello everyone I did a clean flash of
Stable V10.2.1.0.OEIMIXM on my redmi note 5 ai
When I proceed with the setup,I get Google play services stop working and the setup would turn black and blank
I have unlocked bootloader, I flash the stable Rom via twrp
Click to expand...
Click to collapse
tyr the fastboot rom and miflash.
raptorddd said:
tyr the fastboot rom and miflash.
Click to expand...
Click to collapse
I think the last time I try fastboot Rom and mi flash , it failed
Will try again
antonioantuan said:
Exactly this is what happens. After that the screen turns black and you can not continue with the initial configuration. Any more ideas?
Click to expand...
Click to collapse
use fastboot rom and miflash. i remeber having problems lke that and similar. flashing fastboot and clean all NOT relocking bootloader. with mi flash fix it.
Did you reboot the TWRP after the Rom installation?
I had this problem before, what i did is not directly install magisk after installing rom. Install the rom, let it boot for first time, than boot to twrp and install magisk.
Had the same issue, solved by flashing fastboot rom
I used official TWRP. I tried to install PitchBlack Recovery and the rom Miui Developer installed correctly.
from MIUI 10 Global Rom. i tried to install Camera2Api by Magisk.
then the problem started.
it started bootlooping at the MIUI logo.
Then i delete cache/dalvik/data, it is still the same.
I already install MIUI Rom, and now it stucked at "Find My Device closed unexpectedly"..
What should i do ??
Thanks
sevensaints said:
from MIUI 10 Global Rom. i tried to install Camera2Api by Magisk.
then the problem started.
it started bootlooping at the MIUI logo.
Then i delete cache/dalvik/data, it is still the same.
I already install MIUI Rom, and now it stucked at "Find My Device closed unexpectedly"..
What should i do ??
Thanks
Click to expand...
Click to collapse
Try removing magisk by flashing magisk uninstaller
Regarding your problems
You should format internal storage via twrp or any recovery
Hello,
i have version 11.0.2.0 Global on the device with twrp, magisk and edXposed.
Now I have seen that there is already a global version 11.0.6.0.
In my case, how can I update to a new version without losing the data and settings?
And one more question in general. Version 11.0.6.0 is not shown to me via OTA. Here it says, latest stable version 11.0.2.0. Is it not rolled out via OTA?
And if there was a newer version available via OTA, could I install the update despite TWRP?
hmarder said:
Hello,
i have version 11.0.2.0 Global on the device with twrp, magisk and edXposed.
Now I have seen that there is already a global version 11.0.6.0.
In my case, how can I update to a new version without losing the data and settings?
And one more question in general. Version 11.0.6.0 is not shown to me via OTA. Here it says, latest stable version 11.0.2.0. Is it not rolled out via OTA?
And if there was a newer version available via OTA, could I install the update despite TWRP?
Click to expand...
Click to collapse
I (without root) flashed the OTA on 11.0.2.0 global PGGMIXM to 11.0.6.0, but, to flash with root... Maybe (I dont know if it will brick) but you can try flash a recovery version of 11.0.6.0
hmarder said:
Hello,
i have version 11.0.2.0 Global on the device with twrp, magisk and edXposed.
Now I have seen that there is already a global version 11.0.6.0.
In my case, how can I update to a new version without losing the data and settings?
And one more question in general. Version 11.0.6.0 is not shown to me via OTA. Here it says, latest stable version 11.0.2.0. Is it not rolled out via OTA?
And if there was a newer version available via OTA, could I install the update despite TWRP?
Click to expand...
Click to collapse
I had exactly the same setup as you - here's what I did: 1 - Downloaded full rom from official Mi website (MIUI Global 11.0.6.0(PGGMIXM) 2 - Moved rom to root storage 3 - Flashed rom with TWRP, and voila! Updated to latest stable rom. Just remember to flash TWRP recovery again through Fastboot, because you will have stock recovery after update. I am using LTWRP- 3.3.1 -0924 and rooted and installed Magisk, without issues
hmarder said:
Hello,
i have version 11.0.2.0 Global on the device with twrp, magisk and edXposed.
Now I have seen that there is already a global version 11.0.6.0.
In my case, how can I update to a new version without losing the data and settings?
And one more question in general. Version 11.0.6.0 is not shown to me via OTA. Here it says, latest stable version 11.0.2.0. Is it not rolled out via OTA?
And if there was a newer version available via OTA, could I install the update despite TWRP?
Click to expand...
Click to collapse
One thing you forgot to mention is what region is your phone (not your Rom). If Chinese you may have to be extra cautious and steps above might not work for you.
Good luck!
KonahZave said:
I (without root) flashed the OTA on 11.0.2.0 global PGGMIXM to 11.0.6.0, but, to flash with root... Maybe (I dont know if it will brick) but you can try flash a recovery version of 11.0.6.0
Click to expand...
Click to collapse
Interesting. I'm still on rooted miui 10 4.5.0 PGGEUXM rooted magisk and twrp recovery-红米Note8Pro-3.3.1-9.0.img
I didn't update yet as bricking started to happen and I can't miss my phone as a daily driver.
Normally I would flash the full ROM, flash magisk, wipe cache and reboot.
So flashing full ROM doesn't break root?
Can't we flash recovery by twrp after flashing ROM instead by flashing by fastboot?
Isnt secure flash twrp after the ROM.
donkyshot said:
So flashing full ROM doesn't break root?
Can't we flash recovery by twrp after flashing ROM instead by flashing by fastboot?
Click to expand...
Click to collapse
Flashing a full rom will break root, and install stock recovery...
It is too risky to flash another recovery with twrp (possible brick)
so where to put official update on sd card?
download recovery rom?
unoturbo1 said:
I had exactly the same setup as you - here's what I did: 1 - Downloaded full rom from official Mi website (MIUI Global 11.0.6.0(PGGMIXM) 2 - Moved rom to root storage 3 - Flashed rom with TWRP, and voila! Updated to latest stable rom. Just remember to flash TWRP recovery again through Fastboot, because you will have stock recovery after update. I am using LTWRP- 3.3.1 -0924 and rooted and installed Magisk, without issues
Click to expand...
Click to collapse
I just brought rmn8p with miui 11.0.6.0 ,so it is ok to use LRTWRP-3.3.1 -0924. I came across a new version -1104, I'll try it after unlock the bootloader. After that flash preloader then trwp.
Use LR.TWRP, it got an option to make the TWRP persist on every OTA.
Also LR.TWRP = less headache on Xiaomi devices.
Here's the latest build: https://mega.nz/folder/cMAT3Q4b#7CbPV7sbEuSEdP7cehXJ-w
tze_vitamin said:
so where to put official update on sd card?
download recovery rom?
Click to expand...
Click to collapse
??
Put on external sd card dude
unoturbo1 said:
I had exactly the same setup as you - here's what I did: 1 - Downloaded full rom from official Mi website (MIUI Global 11.0.6.0(PGGMIXM) 2 - Moved rom to root storage 3 - Flashed rom with TWRP, and voila! Updated to latest stable rom. Just remember to flash TWRP recovery again through Fastboot, because you will have stock recovery after update. I am using LTWRP- 3.3.1 -0924 and rooted and installed Magisk, without issues
Click to expand...
Click to collapse
For chinese, this will brick the phone. See this instead.
Guys I Just see This video and in it shows the update process, with ltwrp, when the recovery capture the process and update even without losing data, its This True?, somebody has tried?
Link.
This will brick every phone. I brick my EU ROM, with this method of update rooted phone.
What is correct solution to update rooted phone?
Redmi Note 8 Pro, 11.0.2 QGGEUXM, TWRP 3.3.1 1210, Magisk 20.3 -> 12.0.1 QGGEUXM
System say there exists update, i choose download, select reboot, but after reboot i end up in TWRP but nothing happened. After exit i boot to old 11.0.2 system with message that update fail.
Edit 1: after 2. download/update/reboot TWRP start installing image ...
Edit 2: after automatic update system say 12.0.1, just loosing root (all apps stay)
Edit 3: installed TWRP again, Magisk (there was little problem because Magisk Manager say "not installed", but after some googlig i fix that. So i update system without reinstalling apps or loosing data.
Clear solution is probably download full rom from official Mi website and flash selected rom with TWRP (flash TWRP recovery again, repeat root process, to get root back). See next post.
RedMu said:
So what is correct solution to update rooted phone?
Redmi Note 8 Pro, 11.0.2 QGGEUXM, TWRP 1210, Magicks 20.3 -> 12.0.1 QGGEUXM
Now system say there exists update, i choose download, select reboot, but after reboot i end up in TWRP. After exit i boot to old 11.0.2 system with message that update fail.
So solution is probably downloaded full rom from official Mi website and flash selected rom with TWRP (flash TWRP recovery again, repeat root process, to get root back).
So what is correct way for update in this case?
Click to expand...
Click to collapse
This is how I upgraded, try at your own risk.
Download full recovery zip of MIUI 12 and latest magisk
Create twrp Backup just in case
In LR TWRP 10 mount & format system, cache, dalvik, vendor.
Flash full rom (not ota!)
Press home to return to the main screen Choose Advanced-File Manager item >system_root / system / folder at the bottom if there is a recovery_fromboot.p file delete it.
Go back to Advanced and select Close AVB2.0 and confirm with a swipe to the right.
flash Magisk
boot to system
First boot takes a while, relax and grab a drink
Remember to backup and close AVB!
Thank you so much for sharing these steps. I have questions for a couple of steps below:
donkyshot said:
This is how I upgraded, try at your own risk.
Download full recovery zip of MIUI 12 and latest magisk
Create twrp Backup just in case
In LR TWRP 10 mount & format system, cache, dalvik, vendor.
Click to expand...
Click to collapse
What is TWRP 10? Do I format first and then mount? I usually wipe system, cache, dalvik and then "install" the full rom (your next step), but i never try "mount" here. What does mount do here? what is wiping vender and mounting vender?
donkyshot said:
[*]Flash full rom (not ota!)
[*]Press home to return to the main screen Choose Advanced-File Manager item >system_root / system / folder at the bottom if there is a recovery_fromboot.p file delete it.
[*]Go back to Advanced and select Close AVB2.0 and confirm with a swipe to the right.
Click to expand...
Click to collapse
There are two check box here. one is "close the boot verification of avb2.0" the other is "close the DMVerity of avb2.0". Do O check one of both?
Thank you!
po1 said:
Thank you so much for sharing these steps. I have questions for a couple of steps below:
What is TWRP 10? Do I format first and then mount? I usually wipe system, cache, dalvik and then "install" the full rom (your next step), but i never try "mount" here. What does mount do here? what is wiping vender and mounting vender?
There are two check box here. one is "close the boot verification of avb2.0" the other is "close the DMVerity of avb2.0". Do O check one of both?
Thank you!
Click to expand...
Click to collapse
Recovery LR TWRP for Android 10
https://androidfilehost.com/?fid=8889791610682889486
First mount system, cache, dalvik, vendor
Than format system, cache, dalvik, vendor
Without mounting folders they won't be mounted
►go back to your main screen: ADVANCED- close AVB 2.0 then swipe to confirm, just tick only 1st box, ignore the second box
Hi
I flashed TWRP-3.3.1-110 Redmi Note 8 Pro Technology Vikram, install seemed ok, I can boot to recovery. Once phone is booted to system there is no sound/audio on phone is there a way to fix it?
Miui Global 10.4,3.1 Android version 9 (pgginxm) ppr1 180610.011
Thanks in advance for any help
Smokes
It happened to me too.
I flashed an full fastboot rom to the device (without wiping user data) and it fixed the issue for me.
Thanks for the reply, what worked for me was was to use LR Team Twrp 3.3.1- 0924 install root from recovery which installs Magisk 19.4 (any newer versions of Magisk would break the sound completely) This is on Miui Global 10.4.0 PGGINXM. Hope this helps somebody, 2 fixes to choose from now.