LG G4 H818N Stuck in Download Mode - G4 Q&A, Help & Troubleshooting

Hi, I've been trying to fix my H818N from the past couple of days.
Here is what I did to brick it, unfortunately
1. Downloaded Nougat 7.0 TOT file (H818P v29a TOT) from this website: androidsage lg g4 android 7 0 nougat firmware
2. Started my G4 into download mode and tried to load this TOT file using LG UP, however, LG UP stopped me by displaying an error message: Invalid TOT file
3. Then I used WinHex to change H818P to H818N in the TOT file and saved it
4. Now I was able to upload this file to my G4 in Refurbished mode using LG UP, the upload completed, phone rebooted and displayed: Erasing
5. After that it is stuck in download mode (If I restart it, it displays LG logo and starts download mode automatically)
6. In Download mode, my phone displays this at the bottom of screen:
U 633A s12. 0 AS10. 5 B100 UHS
S U LG-H818N 07.0 Hrev_10 .CPU4
H81529a
Here is what I did till now without any success:
1. installed the latest LG drivers, LG UP, and LG Flash tools on my PC
2. Tried to Flash the following firmwares using LG UP/ LG Flash Tool (I also extracted the dll file from each firmware one by one and placed in the model folder for LG UP while trying)
H815 V20o Modded.kdz
H818N10l_00_0113.kdz
H818N20f_00_0818.kdz
H818N20h_00_1019.kdz
H81520p_00_0403.kdz
H81820p_00_0314.kdz
Hong Kong H818N10b.kdz
H81520p_00_0314.kdz
H815TR20g_00_0428.kdz
F500K20C_00.kdz
All the firmwares get stuck at Internal command failed 9%, 11%, 24%
3) I have scoured the internet but wasn't able to find a solution yet
4) I even tried using the fastboot mode but unfortunately the bootloader is locked and I cannot erase the recovery or image
Now I'm not sure what else can be done to bring my phone back to life. I might try to get it into Qualcomm 9008 mode and try to unbrick it by following this guide: pakfones unbrick lg g4 hard bricked
Any help on this will be much appreciated

tgunn said:
Hi, I've been trying to fix my H818N from the past couple of days.
Here is what I did to brick it, unfortunately
1. Downloaded Nougat 7.0 TOT file (H818P v29a TOT) from this website: androidsage lg g4 android 7 0 nougat firmware
2. Started my G4 into download mode and tried to load this TOT file using LG UP, however, LG UP stopped me by displaying an error message: Invalid TOT file
3. Then I used WinHex to change H818P to H818N in the TOT file and saved it
4. Now I was able to upload this file to my G4 in Refurbished mode using LG UP, the upload completed, phone rebooted and displayed: Erasing
5. After that it is stuck in download mode (If I restart it, it displays LG logo and starts download mode automatically)
6. In Download mode, my phone displays this at the bottom of screen:
U 633A s12. 0 AS10. 5 B100 UHS
S U LG-H818N 07.0 Hrev_10 .CPU4
H81529a
Here is what I did till now without any success:
1. installed the latest LG drivers, LG UP, and LG Flash tools on my PC
2. Tried to Flash the following firmwares using LG UP/ LG Flash Tool (I also extracted the dll file from each firmware one by one and placed in the model folder for LG UP while trying)
H815 V20o Modded.kdz
H818N10l_00_0113.kdz
H818N20f_00_0818.kdz
H818N20h_00_1019.kdz
H81520p_00_0403.kdz
H81820p_00_0314.kdz
Hong Kong H818N10b.kdz
H81520p_00_0314.kdz
H815TR20g_00_0428.kdz
F500K20C_00.kdz
All the firmwares get stuck at Internal command failed 9%, 11%, 24%
3) I have scoured the internet but wasn't able to find a solution yet
4) I even tried using the fastboot mode but unfortunately the bootloader is locked and I cannot erase the recovery or image
Now I'm not sure what else can be done to bring my phone back to life. I might try to get it into Qualcomm 9008 mode and try to unbrick it by following this guide: pakfones unbrick lg g4 hard bricked
Any help on this will be much appreciated
Click to expand...
Click to collapse
Hi.. any help on this please

tgunn said:
Hi.. any help on this please
Click to expand...
Click to collapse
I had similar. LG Bridge helped me.

tgunn said:
Hi, I've been trying to fix my H818N from the past couple of days.
Here is what I did to brick it, unfortunately
1. Downloaded Nougat 7.0 TOT file (H818P v29a TOT) from this website: androidsage lg g4 android 7 0 nougat firmware
2. Started my G4 into download mode and tried to load this TOT file using LG UP, however, LG UP stopped me by displaying an error message: Invalid TOT file
3. Then I used WinHex to change H818P to H818N in the TOT file and saved it
4. Now I was able to upload this file to my G4 in Refurbished mode using LG UP, the upload completed, phone rebooted and displayed: Erasing
5. After that it is stuck in download mode (If I restart it, it displays LG logo and starts download mode automatically)
6. In Download mode, my phone displays this at the bottom of screen:
U 633A s12. 0 AS10. 5 B100 UHS
S U LG-H818N 07.0 Hrev_10 .CPU4
H81529a
Here is what I did till now without any success:
1. installed the latest LG drivers, LG UP, and LG Flash tools on my PC
2. Tried to Flash the following firmwares using LG UP/ LG Flash Tool (I also extracted the dll file from each firmware one by one and placed in the model folder for LG UP while trying)
H815 V20o Modded.kdz
H818N10l_00_0113.kdz
H818N20f_00_0818.kdz
H818N20h_00_1019.kdz
H81520p_00_0403.kdz
H81820p_00_0314.kdz
Hong Kong H818N10b.kdz
H81520p_00_0314.kdz
H815TR20g_00_0428.kdz
F500K20C_00.kdz
All the firmwares get stuck at Internal command failed 9%, 11%, 24%
3) I have scoured the internet but wasn't able to find a solution yet
4) I even tried using the fastboot mode but unfortunately the bootloader is locked and I cannot erase the recovery or image
Now I'm not sure what else can be done to bring my phone back to life. I might try to get it into Qualcomm 9008 mode and try to unbrick it by following this guide: pakfones unbrick lg g4 hard bricked
Any help on this will be much appreciated
Click to expand...
Click to collapse
Hi friend,
No issues, even I faced the same problem. Now everything ok, just click this link https://forum.xda-developers.com/g4/general/update-lg-g4-h818p-to-android-7-lg-h815-t3677485/page5
and go to that page, you may find the post by esco_448
Modified KDZ link to downgrade from nougat to Marshmallow
https://mega.nz/#!BKRnDLIZ!K46qoXNhW...XJDd9MhuNdb-WA
Also please use this dll with LGUP.
https://mega.nz/#!lShUlbgK!ZjNfIbPSv...ZDThw7HQ7ZZkKU
In addition edit the downloaded file, with winhex, then do the normal procedure as you do before, thats all.
Good luck
Sangames

Related

[Q] No dll & tot files for f240x devices??

Hi I'm a noob who just bricked my F240L (korean ver.):crying: I somehow wiped my system partition and the result is disastrous; KDZ flashing is impossible via R&D / support tool and I can't even get into the recovery mode. Only download mode is available.
I heard that it could be fixed by using NPST but I only can find the files for E980 at
http://forum.xda-developers.com/showthread.php?t=2272177, not 240x series. Moreover, KDZ files for OG Pro cannot be extracted by using LGExtractor so there is no way I can get this file by my own.
So is there any possible way for me to get those files??
-------------------------------------------------------------------------------------------------------SOLVED----------------------------------------------------------------------------------------------------------------------
How to solve it ? I'm also having the same problem
I got the same problem also, mine is F240L (Korean version)
The differences is I can manage to enter CWM, but the CWM can't mount external SDcard. As if my MicroSD doesn't exist.
I got no backup file to restore via CWM 6.0.3.3.
Using R&D Tool to flash, after 10s update process. Appear error message "Insufficient Battery Level to Proceed", that's strange because the battery is 100% full.
Using KDZ Updater, the error message appear "File Extracted Error" for 2 KDZ files I got (10T and 10V).
Hard Reset didn't solve the problem.
Now I'm stuck in DOWNLOAD MODE and CWM 6.0.3.3 (can't do anything in CWM).
Before entering CWM, there's an error message "Secure Booting Error ! Cause : Device Unlock, so Boot success !"
Please, anyone would be so kindfull to HELP.
@stupididiotism can you explain how you solve it ?
@chimmot307 have you ever tried this version to flash (translate from chinese)
so my phone was bricked (only download mode available) 1hour ago:
go in download mode->install LG support tool->in menu go to "customer support"->"recovery phone"->(your imei should be here or enter it if not)->click check
and now wait it download the whole img and flash it for you
The firmware 10T in baidu.com is broken, asking for username and password to resume. Little HELP with the username and password, fellas ?
I follow your advice go to "customer support"->"recovery phone"
After 10s update process. Appear error message "Insufficient Battery Level to Proceed", that's strange because the battery is 100% full same with 2nd battery whose 100% full also.
It seems LG Corps. tried to block anyone outside Korean to update their phone (I live in Indonesia, got this phone from real Korean people who sale this phone in Indonesia illegally, because Indonesian market is E988-16GB storage compare to F240L more spacious).
chimmot307 said:
I follow your advice go to "customer support"->"recovery phone"
After 10s update process. Appear error message "Insufficient Battery Level to Proceed", that's strange because the battery is 100% full same with 2nd battery whose 100% full also.
It seems LG Corps. tried to block anyone outside Korean to update their phone (I live in Indonesia, got this phone from real Korean people who sale this phone in Indonesia illegally, because Indonesian market is E988-16GB storage compare to F240L more spacious).
Click to expand...
Click to collapse
ok i'm in France, so try with LG pc suite it have it own version of LG support tool in it
just go in device->firmware recovery
that's the method i used
smaybe said:
ok i'm in France, so try with LG pc suite it have it own version of LG support tool in it
just go in device->firmware recovery
that's the method i used
Click to expand...
Click to collapse
Following your 1st advice, I managed to download the KDZ from baidu.com, and run the tutorial step by step. Everything runs smoothly.
Thanks in advance @smaybe. I owe you BIG one.
:good:
For those who got stuck in DOWNLOAD mode, you can follow these steps (in attachment).
LG PC Suite won't recognise my device (in DOWNLOAD MODE), it only recognise when in LG SOFTWARE MODE (Settings => PC Connection => USB Connection Type => LG Software).
So I can't go to Device => Firmware Recovery.
Why did you delete the 1st advice, @smaybe ? Totally recommended.
hi guys
I was in the worst condition : wiped system partition and moreover, I hard reset my 'rooted' phone.
Recovery mode not supported and kdz flashing also not working.
Then I found this divine tool called 'LG mobile flash tool v1.5' and I could find the tot and dll files for F240 series from some china website (I paid for that tho)
So my point is if anyone holding F240L and having the same problem as me. Then I can send you the files. I feel like posting the file here is a violation of intellectual property of the chinese devleoper(?! what am I saying?)
chimmot307 said:
LG PC Suite won't recognise my device (in DOWNLOAD MODE), it only recognise when in LG SOFTWARE MODE (Settings => PC Connection => USB Connection Type => LG Software).
So I can't go to Device => Firmware Recovery.
Why did you delete the 1st advice, @smaybe ? Totally recommended.
Click to expand...
Click to collapse
It's strange I will look after work but for me it recognise even in download mode
I deleted because I thought the last solution is easier i will take it back
LG PC Suite sucks
I've updated to the latest version, it still doesn't recognise my F240L (in SOFTWARE MODE), it said "Need to change with the right cable" even when I swap with different USB cable.
Or maybe my Windows 7 Ultimate (64bit) having problem in compatibility with PC Suite that won't recognise the USB. Cause, I haven't try with different operating system (Mac, or Windows XP)
Stuck in U+ LTE Logo
Dungeon Hunter 4 messing my Optimus G Pro in this thread http://forum.xda-developers.com/showthread.php?t=2380374
So I decided, to wipe system & data partition.
Hope that KDZ Updater will bring it back normal the way smaybe told me to.
KDZ Updater show 100% Finished, but my F240L still stuck in U+ LTE Logo.
So I try new LG Mobile Support Tool, Upgrade Recovery => IMEI=> OK. Updating to 1.69 GB, 100% finished, still stuck in U+ LTE Logo.
I haven't try LG Mobile Flash Tool 1.5, maybe stupididiotism could tell me step by step ! And not to forget to send the TOT & DLL files.
This is my email : [email protected]
Thanks in advance.
LG Flashtool Error Message
I run LG Flashtool according to website http://forum.gsmhosting.com/vbb/f177/lg-flash-tool-free-no-need-b2b-user-pass-1628819/index2.html
Extract F240L10t_00.kdz from Baidu.com, got 2 file :
- LGUP_GKV.dll
- F240L10t_00.dz
So I used those 2 file in LG Flashtool ( I don't know if those the correct files to use in LG Flashtool, cause I can't seem to find DLL file for F240L, but I think for S/W file is correct ).
Used port COM41 to flash (DOWNLOAD MODE is activated on F240L). Then I unplugged the USB cable for 5s, and replugged it. Error message appears as follow.
Am I using the correct DLL file to flash ? If not, would you be so kind to upload the DLL so I can flash my F240L ?
Thanks.
I need DLL file for LG FlashTool
stupididiotism said:
I was in the worst condition : wiped system partition and moreover, I hard reset my 'rooted' phone.
Recovery mode not supported and kdz flashing also not working.
Then I found this divine tool called 'LG mobile flash tool v1.5' and I could find the tot and dll files for F240 series from some china website (I paid for that tho)
So my point is if anyone holding F240L and having the same problem as me. Then I can send you the files. I feel like posting the file here is a violation of intellectual property of the chinese devleoper(?! what am I saying?)
Click to expand...
Click to collapse
I need it badly, do you mind sending the DLL and TOT files for me, @stupididiotism ?
Here's my email : [email protected]
Thanks in advance.:angel:
LG Flashtool DOES the job
Finally, get my F240L working after stuck in U+ LTE Logo.
Using this method http://forum.gsmhosting.com/vbb/f177/lg-flash-tool-free-no-need-b2b-user-pass-1628819/index2.html
And got LGUP_GKV.DLL from extracting F240L10t_00.kdz from pan.baidu.com (see attachment)
And got TOT file from http://www.gaojituan.com/thread-90-1-1.html or http://www.optimusforums.com/threads/f240-optimus-g-pro-firmware-downloads.7679
I hope this solution might help someone who ever got this problem.
Enjoy this super AWESOME phone.
chimmot307 said:
Finally, get my F240L working after stuck in U+ LTE Logo.
Using this method http://forum.gsmhosting.com/vbb/f177/lg-flash-tool-free-no-need-b2b-user-pass-1628819/index2.html
And got LGUP_GKV.DLL from extracting F240L10t_00.kdz from pan.baidu.com (see attachment)
And got TOT file from http://www.gaojituan.com/thread-90-1-1.html or http://www.optimusforums.com/threads/f240-optimus-g-pro-firmware-downloads.7679
I hope this solution might help someone who ever got this problem.
Enjoy this super AWESOME phone.
Click to expand...
Click to collapse
Could you post TOT file please. I'm stuck in CWM, what do I do?
chimmot307 said:
Following your 1st advice, I managed to download the KDZ from baidu.com, and run the tutorial step by step. Everything runs smoothly.
Thanks in advance @smaybe. I owe you BIG one.
:good:
For those who got stuck in DOWNLOAD mode, you can follow these steps (in attachment).
Click to expand...
Click to collapse
I have the same probleme, low battery...
This quality is to bad can't see the picture. Can you re up please?
stupididiotism said:
I was in the worst condition : wiped system partition and moreover, I hard reset my 'rooted' phone.
Recovery mode not supported and kdz flashing also not working.
Then I found this divine tool called 'LG mobile flash tool v1.5' and I could find the tot and dll files for F240 series from some china website (I paid for that tho)
So my point is if anyone holding F240L and having the same problem as me. Then I can send you the files. I feel like posting the file here is a violation of intellectual property of the chinese devleoper(?! what am I saying?)
Click to expand...
Click to collapse
Hi , pls i really need the f240l files, can u pls send me?
thx in advance
Follow this link
http://forum.xda-developers.com/showthread.php?t=2396048
Sent from my LG-F240L using xda app-developers app
What did you use to extract the DLL? I tried 7zip and it doesn't recognize the format
chimmot307 said:
I run LG Flashtool according to website http://forum.gsmhosting.com/vbb/f177/lg-flash-tool-free-no-need-b2b-user-pass-1628819/index2.html
Extract F240L10t_00.kdz from Baidu.com, got 2 file :
- LGUP_GKV.dll
- F240L10t_00.dz
So I used those 2 file in LG Flashtool ( I don't know if those the correct files to use in LG Flashtool, cause I can't seem to find DLL file for F240L, but I think for S/W file is correct ).
Used port COM41 to flash (DOWNLOAD MODE is activated on F240L). Then I unplugged the USB cable for 5s, and replugged it. Error message appears as follow.
Am I using the correct DLL file to flash ? If not, would you be so kind to upload the DLL so I can flash my F240L ?
Thanks.
Click to expand...
Click to collapse

LG G4 H815 stuck, download mode only, no adb

Hello hello,
I unlocked bootloader, installed TWRP 2.8.7.0 (adb -> fastboot method) and then I flashed SuperSU 2.46 zip. After reboot from TWRP my phone stuck.
I can't access TWRP or i don't know how to…
System isn't starting BUT sometimes after few minutes of seeing LG logo i see standard wallpaper and suddenly animation freezes. That's all.
When i go to recovery mode (voldown+power, release power and press power again) I can "do" factory reset. I choose 2xYES and i see green android. Then phone is restarting but i should enter to TWRP, right?
I tried to flash stock system (kdz, tot, dz) via:
- LG Flash Tool 2014
- LG Flash Tool 1.8.6.527
- LGUP
- LG Bridge
but nothing…
My phone PID and IMEI is null :/ (and "CUMSS" to :?)
I tried fix that with QPST (2 different versions) but in device manager my phone is only detected as COM port. No "Android Device". I can't read and write anything…
adb isn't working
I tried all USB 2.0 ports, different drivers, roms (even not for 815), dlls.
I fought 3 days and still have brick, not smartphone
I have only download mode working.
I can send commands to com port (Send_Command.exe) but sometimes nothing happen, sometimes i see "fail" after sent command.
Any ideas? Can I install recovery through download mode? Or maybe somebody know how to send files to phone in download mode but without adb?
I had stock rom MM V20L. What else you need to know?
Thanks for any suggestions, sorry for chaos in post and my english.
After trying different roms in different programs with 3 versions of dlls and different drivers…
I found solution: just reinstalled .NET Framework and then finally i flashed by LGUP (refurbish, v20L, kdz, dll 0.0.3.23)!
Welcome back H815
2 0 said:
After trying different roms in different programs with 3 versions of dlls and different drivers…
I found solution: just reinstalled .NET Framework and then finally i flashed by LGUP (refurbish, v20L, kdz, dll 0.0.3.23)!
Welcome back H815
Click to expand...
Click to collapse
where did you founf v20L kdz i need it because my phone wont flash any kdz i think its to prevent downgrades
https://lg-firmwares.com/lg-h815-firmwares/
Try some from skdubg's link. This is probable the same as mine
PLS Europe PL/Poland H81520l_00_0928.kdz 1.68 G 2016-11-25
Click to expand...
Click to collapse
download-file/?fileId=4325 I can't post links
This is MD5 of my file 8f685baf42869c50ec5f1b7770aa3957 *H81520l_00_0928.kdz
If you still can't flash then i will upload my kdz somewhere. GL
LG G4 Model F500L Stuck on download mode After Downgrade
Hi
i have a problem with my LG G4 Model F500L i try to downgrade from Marsmallow to Lolilpop By Flashing with LGUP Tool when i flash it. it error at 16% boot fail. So i disconnect USB and pull out battery and when i turn on it stuck on download mode.. i have try to flash with any firmware and any LG Tools but it's still fail at writing boot step i had try with Optopus box but it's still fail at wrting boot fail what is the problem . i need help now.... i just bought my phone for a week. Thanks for your helping ....

D852 CAD Bad Flash Problem and stuck in Fastboot.

Hi, any help would be appreciated about to give up sadly.
Model # Lg G3 D-852 on Rogers
SW Version before flash - D85230d_00_0721
I flashed using the guide here: TO GO BACK TO LP FROM MM
https://forum.xda-developers.com/showpost.php?p=64624353&postcount=3
It ran fine and stated successful, click here to continue.... I did and after reboot my phone is now stuck in fastboot (after the LG boot screen goes to android with stomach open and spinning inside)
I tried the following:
- reflashing again, but it gives me the error "Communication fail with device" after it reaches 6%
- flashing my tot file with LG FlashTool 1.8.1.1023 and put on port 41
- tried changing the dll with the LG FlashTool 1.8.1.1023 to LGUP_8974, LGUP_8994, LGD852_20140702_LGFLASHv160
Thanks.
I don't know if I remember correctly but stopping at 6 percent while flashing was somewhat of a common issue and had to do with Windows's HID settings.
Try following another guide from the forum and restoring using LG Flash Tool and a full tot file, as opposed to LGUP.
same problem. Did you have a problem? 6% stopped and error

[Unbrick] How to revive H815 - no recovery/fastboot/download mode

Today something went wrong while flashing weekly LOS build and my LG G4 (H815 with v20P firmware) went into very fast bootloop: https://www.youtube.com/watch?v=9gm0dh6bLp4
In this state i wasn't able to enter recovery, nor fastboot, nor download mode. Only IMEI screen (Vol Up + Vol Down I believe) was accessible which was no use.
Here are the steps which got me out of troubles:
A) Verify that you have LGUP installed and have proper 8994.dll version for your device.
Different versions of FW use different libraries which results in errors during flashing.
Steps:
1) Install LGUP with this guide https://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
2) Get the right DLL. You can try this one:
Abandoned War Place said:
FIX REFUBRISH/DOWNGRADE ETC STUCK AT 16% DOWNLOAD MODE UNABLE TO GET BACK TO STOCK
error 0x2000 invalid command response Has Been FixeD WITH THE LASTEST DLL FILE
FILE INCLUDE (DLL+PATCH_DLL+SETUP LGUP+DRIVER) package
Please Read The *READ ME FILE FOR THE RIGHT INSTALLATION WITHOUT GETTING ANY PROBLEM :
Link Easy To Download No Ads Bulllsh*t.................. :
https://drive.google.com/file/d/0B_yWw6RLoA-gdTMtZFczMUhQOHM/view?usp=sharing
Click to expand...
Click to collapse
...or extract it directly from KDZ file with extractor https://forum.xda-developers.com/showthread.php?t=2600575.
You need to extract it from FW version that your phone is already running, not from the one you are about to flash! (when flashing from v20d to v20p you need v20d version, but when reflashing v20p FW you need the v20p DLL)
3) Navigate to LGUP install folder (default "C:\Program Files (x86)\LG Electronics\LGUP")
4) Overwrite the old DLL located in "model\8994" folder version with new one in
I don't know the exact compatibility, or how many different DLL versions are out there. Hopefully it doesn't brick the device even more when wrong version is used, it just doesn't work.
B) Write h815 image to sdcard as mentioned here:
leptdre said:
Hi guys,
i came up with a temporary to unbrick LG G4 H815 , you just need a 32 GB SD card ( i used Sandisk 10 class) , the dump that i will link , and Win32 disk Imager, the SD card must low level formatted.
1- download this dump
http://www.4shared.com/rar/NzSqsBzib...230737_00.html
2- put the SD card in the PC and chose the dump file and write ( run as admin ):
Click to expand...
Click to collapse
It worked for me with just 8GB one. Be aware that the image written to SD have like 20 partitions so windows might go crazy.
C) Follow these steps:
jam1445 said:
3. One the Write Completes. Eject Card and insert in your LG G4 H811. Press Volume Up Button while connecting the USB Cable.
4. There you go, it will open the download mode.
Click to expand...
Click to collapse
D) At this moment my G4 finally entered Download mode
I was able to reflash KDZ using the usual procedure (select UPGRADE, find a KDZ file, restart LGUP, select REFURBRISH and START). Initially I got 0x2000 error at approximately 16% (boot displayed as status) that was caused by old version of 8994.dll library.
E) Back to stock
Now you should have stock H815 again so lets flash LOS back as usual
Kudos to OPs: @bullghost , @shakeyabooti , @leptdre , @jam1445 and other posters on G4 section of XDA!
Hope this helps someone!
Good job. If your using this and you're gonna buy a SDCard on purpose, be aware that this fix might not work on your device. Ehehe
@Jirrick im getting the same error on LGUP where do i find a newer version of the dll?
inso420 said:
@Jirrick im getting the same error on LGUP where do i find a newer version of the dll?
Click to expand...
Click to collapse
are these what you looking for.?
https://forum.xda-developers.com/showpost.php?p=73586554&postcount=921
VS986 Stuck on Download Mode
Jirrick said:
Today something went wrong while flashing weekly LOS build and my LG G4 (H815 with v20P firmware) went into very fast bootloop: https://www.youtube.com/watch?v=9gm0dh6bLp4
In this state i wasn't able to enter recovery, nor fastboot, nor download mode. Only IMEI screen (Vol Up + Vol Down I believe) was accessible which was no use.
Here are the steps which got me out of troubles:
A) Verify that you have LGUP installed and have proper 8994.dll version for your device.
Different versions of FW use different libraries which results in errors during flashing.
Steps:
1) Install LGUP with this guide https://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
2) Get the right DLL. You can try this one:
...or extract it directly from KDZ file with extractor https://forum.xda-developers.com/showthread.php?t=2600575.
You need to extract it from FW version that your phone is already running, not from the one you are about to flash! (when flashing from v20d to v20p you need v20d version, but when reflashing v20p FW you need the v20p DLL)
3) Navigate to LGUP install folder (default "C:\Program Files (x86)\LG Electronics\LGUP")
4) Overwrite the old DLL located in "model\8994" folder version with new one in
I don't know the exact compatibility, or how many different DLL versions are out there. Hopefully it doesn't brick the device even more when wrong version is used, it just doesn't work.
B) Write h815 image to sdcard as mentioned here:
It worked for me with just 8GB one. Be aware that the image written to SD have like 20 partitions so windows might go crazy.
C) Follow these steps:
D) At this moment my G4 finally entered Download mode
I was able to reflash KDZ using the usual procedure (select UPGRADE, find a KDZ file, restart LGUP, select REFURBRISH and START). Initially I got 0x2000 error at approximately 16% (boot displayed as status) that was caused by old version of 8994.dll library.
E) Back to stock
Now you should have stock H815 again so lets flash LOS back as usual
Kudos to OPs: @bullghost , @shakeyabooti , @leptdre , @jam1445 and other posters on G4 section of XDA!
Hope this helps someone!
Click to expand...
Click to collapse
I just did all your steps for my VS986 , and I got 2 G4 Verizon's back up and working , Thank you so much.
---------- Post added at 10:54 AM ---------- Previous post was at 10:53 AM ----------
I just did all your steps for my VS986 , and I got 2 G4 Verizon's back up and working , Thank you so much.
I'm using a 16gb microsd, but however I try to image it (exfat, fat32 filesystems, different win32imager versions) also have tried different cables, but it still doesn't show any sign of life. I bricked it exactly the same way as OP did. Does anyone have anything else I could try to fix this? Also does the battery charge when its on 9008 mode?
inteLzzz said:
I'm using a 16gb microsd, but however I try to image it (exfat, fat32 filesystems, different win32imager versions) also have tried different cables, but it still doesn't show any sign of life. I bricked it exactly the same way as OP did. Does anyone have anything else I could try to fix this? Also does the battery charge when its on 9008 mode?
Click to expand...
Click to collapse
Can you get at least to the IMEI Display mode (Vol UP and then quickly Vol DOWN, keep both pressed until it shows up)?
Jirrick said:
Can you get at least to the IMEI Display mode (Vol UP and then quickly Vol DOWN, keep both pressed until it shows up)?
Click to expand...
Click to collapse
No could it be caused by low battery? I remember it being like 30% when I bricked it, and does it charge under 9008 mode?
Sorry to hear that. I'm afraid this is beyond my knowledge if it wont even enter the IMEI screen. I suppose you can leave it bootlooping in charger over night and then try in the morning?
Jirrick said:
Sorry to hear that. I'm afraid this is beyond my knowledge if it wont even enter the IMEI screen. I suppose you can leave it bootlooping in charger over night and then try in the morning?
Click to expand...
Click to collapse
It does not bootloop, straight up dead. Just shows 9008 forever on the pc, I left it for like 2 hours like that yesterday. I'll leave it overnight today and if not I'll hack up a direct 5v 1a charger to charge the battery directly. If both don't work i'll probably flash LS991 files in QFIL and use it as a tablet afterwards.. damn i got this phone not even 2 weeks ago perfect condition and all. Will not buy any more damn LG devices.
Oh, I thought your phone was rapidly bootlooping like mine did. Sounds like the person who sold it to you was aware that the phone is on last legs (probably even baked the phone so it runs for few days more) and screwed you over. My next phone wont be LG either.

firmware update do not....lg g4 h815

I will be simple, after installing this room
https://forum.xda-developers.com/g4/development/h815-nougat-stock-t3659860
, I had a problem, ie I had more access to the recovery mode, then I wanted to install marshmallow but the phone remains blocked on
firmware update do not unplug the usb connection until the process is complete...
even when I remove the battery and then I turn on the phone it remains locked
Screen:
http://zupimages.net/viewer.php?id=17/37/z8va.jpg
i think you didn't install any Nougat bootloader and modem before flashing the rom
In TWRP wipe everything, then flash Nougat Bootloader and modem (this file) from TWRP:
https://www.androidfilehost.com/?fid=745425885120759121
and only after install Freedom Rom:
https://www.androidfilehost.com/?fid=745425885120759485
Check if it works
lk
lg g4
thank you for having answered, the problem I have no access to the TWRP, when I want to access the TWRP it makes a return to:
firmware update do not unplug the usb connection until the process is complete
thus impossible to install this link:
H815_29a_Modem_and_Bootloader_no_splash
Ok try with LgUP
1) First install Lg Bridge (for LG usb driver) HERE
2) Then install LG UP HERE (both LGUP_Install_Ver_1_14_3.msi and then LGUP_8994_DLL_Ver_0_0_3_23.msi)
3) After download THIS and copy these 2 .dll here C:\Program Files (x86)\LG Electronics\LGUP\model\8994
Download a .kdz LG G4 firmware like this 20d HERE
4) GO in Download mode with your G4
Plug the USB Cable into the PC(not connected to the LG G4)
Have you PC Powered On and Logged in
Power Down the LG G4
Press and Hold the Volume Up Button on the LG G4
While Holding Volume Up, Plug the USB Cable into the LG G4
Continue Holding the Volume Up Button After You See ‘Download Mode’
Let Go of the Volume Up Button When You See the ‘Firmware Update’ Screen on the G4
Click to expand...
Click to collapse
5) and following the indication you need from this post
TO DO A FULL WIPE AND INSTALL MM
1) Open the LGUP on your computer.
2) FILE PATH point it towards the MM KDZ (LgUP will see only .tot, so when you browse and search your .kdz pay attention to change in the menu .tot to *.* to see everyfile you have)
3) After you load the .kdz now shut down LGUP!
4) Now open LGUP again - you will notice that the MM KDZ will still be showing in the FILE PATH section.
5) Select REFURBISH and make sure BIN file is ticked. Press Start. Make cup of tea and be patient
Click to expand...
Click to collapse
you should able to install a clean stock 20d firmware on your G4 (i hope eheheheh)
ps: you will lose your root and TWRP, but after you could install them again
Gigio755 said:
Ok try with LgUP
1) First install Lg Bridge (for LG usb driver) HERE
2) Then install LG UP HERE (both LGUP_Install_Ver_1_14_3.msi and then LGUP_8994_DLL_Ver_0_0_3_23.msi)
3) After download THIS and copy these 2 .dll here C:\Program Files (x86)\LG Electronics\LGUP\model\8994
Download a .kdz LG G4 firmware like this 20d HERE
4) GO in Download mode with your G4
5) and following the indication you need from this post
you should able to install a clean stock 20d firmware on your G4 (i hope eheheheh)
ps: you will lose your root and TWRP, but after you could install them again
Click to expand...
Click to collapse
I have the exact same issue, tried the above but lgup wil stuck at 11 procent with an 0x2000 error message "Invalid command response"
I have tried to flash the 20d version a couple of times but no luck with that so I tried the 10b version still no luck and ending up with the same error. So I decided to give it another try with H81520p_00_0314.kdz and guess what, it flashed and booted up and installing apps now.
I have not been able to download the file, every time I have this error message that appears:
Download interrupted
Robert_1968_ said:
I have the exact same issue, tried the above but lgup wil stuck at 11 procent with an 0x2000 error message "Invalid command response"
I have tried to flash the 20d version a couple of times but no luck with that so I tried the 10b version still no luck and ending up with the same error. So I decided to give it another try with H81520p_00_0314.kdz and guess what, it flashed and booted up and installing apps now.
Click to expand...
Click to collapse
I have not been able to download the file (H81520D_00_0115) , every time I have this error message that appears:
Download interrupted
Gigio755 said:
Ok try with LgUP
1) First install Lg Bridge (for LG usb driver) HERE
2) Then install LG UP HERE (both LGUP_Install_Ver_1_14_3.msi and then LGUP_8994_DLL_Ver_0_0_3_23.msi)
3) After download THIS and copy these 2 .dll here C:\Program Files (x86)\LG Electronics\LGUP\model\8994
Download a .kdz LG G4 firmware like this 20d HERE
4) GO in Download mode with your G4
5) and following the indication you need from this post
you should able to install a clean stock 20d firmware on your G4 (i hope eheheheh)
ps: you will lose your root and TWRP, but after you could install them again
Click to expand...
Click to collapse
wesqz said:
I have not been able to download the file (H81520D_00_0115) , every time I have this error message that appears:
Download interrupted
Click to expand...
Click to collapse
it works...
try the link for the 20g HERE
Robert_1968_ said:
I have the exact same issue, tried the above but lgup wil stuck at 11 procent with an 0x2000 error message "Invalid command response"
I have tried to flash the 20d version a couple of times but no luck with that so I tried the 10b version still no luck and ending up with the same error. So I decided to give it another try with H81520p_00_0314.kdz and guess what, it flashed and booted up and installing apps now.
Click to expand...
Click to collapse
good! can you link please the 20p? peraphs the guy above needs it
Gigio755 said:
it works...
try the link for the 20g HERE
good! can you link please the 20p? peraphs the guy above needs it
Click to expand...
Click to collapse
http://lg-kdz.com/?dir=LG G4/H815
thank you my phone is operational
Robert_1968_ said:
http://lg-kdz.com/?dir=LG G4/H815
Click to expand...
Click to collapse
do you still have the KDZ file? i cannot find the H815 20p KDZ file
Rmegaxx said:
do you still have the KDZ file? i cannot find the H815 20p KDZ file
Click to expand...
Click to collapse
Here is:
https://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
Click on link: 1) Firmware Files - Click HERE!
Rmegaxx said:
do you still have the KDZ file? i cannot find the H815 20p KDZ file
Click to expand...
Click to collapse
Maybe a bit late, but I haven't been around on xda for a while.
https://lg-firmwares.com/files-update-2017-03-30/
here you fiund the kdz if you still need it.
sorry for the late response

Categories

Resources