Related
Hello all!
I am currently on OOS 3.2.8, and official TWRP. I have read all the instructions on the forums but all lead to one option, formatting internal memory. So, my question are:
1. Will flashing oos 4.0 work with official TWRP or 8 have to use modified 28 version?
2. How can I flash oos 4 with modified TWRP and not have to wipe internal memory?
I would appreciate all the responses. Thanks
I was the same predicament as you. I finally took the plunge and now I have Nougat running on my OP3. Here is what I did :
Start: OOS 3.2.8 w/ custom kernel and modified TWRP
1. Flash stock recovery (Google for a forum post in the OP3 forums on downloading the stock recovery and flash it through fastboot)
2. Reboot and let 3.2.8 start
3. Download Snap VPN and change the country to Canada. You will be prompted for the system update.
4. Let the update download (~1 GB)
5. Install the update. You may see an error of the installation may fail as your phone is rooted. Ignore and go ahead.
6. The installer will now boot to stock recovery and reboot with Nougat. All settings and apps will be maintained
The only catch is that you may have ext4 instead of f2fs. I am okay with it for now... But your mileage may vary
All the best!
Edit : Nougat running on my op3.
abhibnl said:
Hello all!
I am currently on OOS 3.2.8, and official TWRP. I have read all the instructions on the forums but all lead to one option, formatting internal memory. So, my question are:
1. Will flashing oos 4.0 work with official TWRP or 8 have to use modified 28 version?
2. How can I flash oos 4 with modified TWRP and not have to wipe internal memory?
I would appreciate all the responses. Thanks
Click to expand...
Click to collapse
Are you rooted? Are you encrypted? What file systems are you using for your partitions? You're not giving full information. Why is formatting not an option if it'll give you the results you want?
To get to F2fs (I do recommend it)
Take a backup of your Data partition. , copy it to your pc with "adb pull /sdcard/Twrp/whatever".
Now go to Twrp>Wipe>Advanced select data and click on change file system. Change it to F2fs. Now restore your backup (Reader the guide all info is there). Profit!
anshulajain said:
I was the same predicament as you. I finally took the plunge and now I have Nougat running on my OP3. Here is what I did :
Start: OOS 3.2.8 w/ custom kernel and modified TWRP
1. Flash stock recovery (Google for a forum post in the OP3 forums on downloading the stock recovery and flash it through fastboot)
2. Reboot and let 3.2.8 start
3. Download Snap VPN and change the country to Canada. You will be prompted for the system update.
4. Let the update download (~1 GB)
5. Install the update. You may see an error of the installation may fail as your phone is rooted. Ignore and go ahead.
6. The installer will now boot to stock recovery and reboot with Nougat. All settings and apps will be maintained
The only catch is that you may have ext4 instead of f2fs. I am okay with it for now... But your mileage may vary
All the best!
Click to expand...
Click to collapse
I don't have any issues with ext4, infact i do feel ext4 is more stable than f2fs so file system is my last concern. Thanks for your method, but then how did u root again? Installing nougat is fine but what after that? I have read that you can't use modified twrp without formatting internal memory first, as it'll show you the pin issue. Let me know how do you propose a safe method to achieve root.
Renosh said:
Are you rooted? Are you encrypted? What file systems are you using for your partitions? You're not giving full information. Why is formatting not an option if it'll give you the results you want?
Click to expand...
Click to collapse
Yes i am encrypted, rooted, stock OOS 3.2.8 + Franco kernel. Official TWRP(not modified). I am using ext4, never used f2fs at all. The time to backup data and then to restore it all back is the reason formatting is not an "preferred" option for me. I can do it, but i would have to wait until i find enough time to do the whole process. I am in a full time job, so i hope you would understand.
Puddi_Puddin said:
To get to F2fs (I do recommend it)
Take a backup of your Data partition. , copy it to your pc with "adb pull /sdcard/Twrp/whatever".
Now go to Twrp>Wipe>Advanced select data and click on change file system. Change it to F2fs. Now restore your backup (Reader the guide all info is there). Profit!
Click to expand...
Click to collapse
Well this again defeats the purpose of my original question, but thanks mate. I would definitely read the guide if decide to switch to f2fs.
@abhibnl. BTW your encrypted. So the modified TWRP won't work.
How to fix:
Wipe Userdata with Fastboot / fastboot erase UserData
Boot into Twrp modified twrp.
Flash OOS 4.0 flash SuperSU and let it boot
You should be decrypted DO NOT install a boot password since you will be encrypted again.
I haven't rooted my phone again. My only reason to root is to install Adaway to block all ads. With DNS66 and Adguard, I have little incentive to root my stock nougat install.
Edit : I had encryption during 3.2.8 and it carried over to 4.0
Puddi_Puddin said:
@abhibnl. BTW your encrypted. So the modified TWRP won't work.
How to fix:
Wipe Userdata with Fastboot / fastboot erase UserData
Boot into Twrp modified twrp.
Flash OOS 4.0 flash SuperSU and let it boot
You should be decrypted DO NOT install a boot password since you will be encrypted again.
Click to expand...
Click to collapse
Thanks a lot for informing me mate. I really don't want to decrypt my storage as of now. I guess flashing stock recovery is the only solution now. Will hope someone would pick up the twrp and update it.
anshulajain said:
I haven't rooted my phone again. My only reason to root is to install Adaway to block all ads. With DNS66 and Adguard, I have little incentive to root my stock nougat install.
Edit : I had encryption during 3.2.8 and it carried over to 4.0
Click to expand...
Click to collapse
Seems like stock recovery is the best way as of now. Seems like I'll have to love without root until someone updates twrp to support encrypted storage.
I haven't updated to Nougat yet, but I looked over Chainfire's SuperSU changelog and its installation script and both of them confirm that from March installing SuperSU prevents forced encryption. Also many guides suggest installing it as way for disabling forced encryption. Of course you have to flash SuperSU just after flashing ROM, before booting the system.
abhibnl said:
Hello all!
I am currently on OOS 3.2.8, and official TWRP. I have read all the instructions on the forums but all lead to one option, formatting internal memory. So, my question are:
1. Will flashing oos 4.0 work with official TWRP or 8 have to use modified 28 version?
2. How can I flash oos 4 with modified TWRP and not have to wipe internal memory?
I would appreciate all the responses. Thanks
Click to expand...
Click to collapse
Very simple indeed...
1. Switch on wifi
2. Download OTA and click install whem finished
3. Once installation completed, flash twrp .28 and latest su
4. Reboot and ignore any errors, youwill beup and running fine...
Zielony360 said:
I haven't updated to Nougat yet, but I looked over Chainfire's SuperSU changelog and its installation script and both of them confirm that from March installing SuperSU prevents forced encryption. Also many guides suggest installing it as way for disabling forced encryption. Of course you have to flash SuperSU just after flashing ROM, before booting the system.
Click to expand...
Click to collapse
That i already knew mate. But i WANT my storage to remain encrypted. And that's the issue with modified TWRP. You can't enter into recovery on that if your storage is encrypted.
kpmohamedhussain said:
Very simple indeed...
1. Switch on wifi
2. Download OTA and click install whem finished
3. Once installation completed, flash twrp .28 and latest su
4. Reboot and ignore any errors, youwill beup and running fine...
Click to expand...
Click to collapse
Again, "You can't enter into recovery on modified TWRP if your storage is encrypted." So i won't be able to enter into twrp in the first place, let alone flash anything.
abhibnl said:
Hello all!
I am currently on OOS 3.2.8, and official TWRP. I have read all the instructions on the forums but all lead to one option, formatting internal memory. So, my question are:
1. Will flashing oos 4.0 work with official TWRP or 8 have to use modified 28 version?
2. How can I flash oos 4 with modified TWRP and not have to wipe internal memory?
I would appreciate all the responses. Thanks
Click to expand...
Click to collapse
In the same boat as you. I have OOS 3.2.8 encrypted, rooted and TWRP 3.0.2-1.26. I too would like to update but have way to much stuff on my phone to back it all up and restore it. Hope you or someone come's up with a solution. I will be following your thread.
Thanks.
Go to twrp. Press backup. Select only data. Save to PC youre backup for safety..
3.2.8 it's Android 6, 4.0 it's Android 7. Some apps might not work from base to base.
If you want to change to F2FS it will format youre phone, wipe phone full internal memory. If you want to change it back to ext4, same.
Clean flash, full wipe it's always better.
dmoses1969 said:
In the same boat as you. I have OOS 3.2.8 encrypted, rooted and TWRP 3.0.2-1.26. I too would like to update but have way to much stuff on my phone to back it all up and restore it. Hope you or someone come's up with a solution. I will be following your thread.
Thanks.
Click to expand...
Click to collapse
My suggestion (and my steps are in #1), install stock recovery, install snap VPN, download the update and install (ignore any errors on root). Once done, you will have Nougat with stock recovery, encryption maintained and all app data also intact.
anshulajain said:
My suggestion (and my steps are in #1), install stock recovery, install snap VPN, download the update and install (ignore any errors on root). Once done, you will have Nougat with stock recovery, encryption maintained and all app data also intact.
Click to expand...
Click to collapse
This is the last resort brother. With this method, unfortunately I won't have any root available. The only way now is to wait for updated twrp.
abhibnl said:
This is the last resort brother. With this method, unfortunately I won't have any root available. The only way now is to wait for updated twrp.
Click to expand...
Click to collapse
I dont know. I found this on Oneplus forum. May be worth trying. Just not 100% sure.....
Thanks! Will try and let you know
abhibnl said:
Thanks! Will try and let you know
Click to expand...
Click to collapse
Well, I tried something, waiting on it to finishing booting and see how it went.
I flashed twrp-3.0.2-1.28-oneplus3p version,
Flashed the OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2af7.zip inside TWRP,
Flashed SR1-SuperSU-v2.79-SR1-20161221223537.zip right after flashing OTA zip.
Its rebooting and says Android is upgrading. Fingers crossed.
EDIT: Its booted and I am on Nougat, didnt lose my data and phone is still encrypted!
Edit: Ended up having issues with settings app locking up. So, I went a different route and its all working great now.
Downloaded the stock recovery image and renamed it to recovery.img
Make sure after you rename it its not named recovery.img.img, If you have show file extensions enabled on your pc you should already see the file extension.
Rebooted to bootloader - adb flash recovery recovery.img
Using the volume keys and power button selected - reboot recovery.
Now in stock recovery - flashed OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2af7.zip
After rom is done flashing, went right back into bootloader. Did not let my phone reboot to start the OS.
Renamed twrp-3.0.2-1.28-oneplus3p.img to recovery.img
adb flash recovery recover.img
Powered off phone and Manually boot it into recovery by holding Power + Volume Down button.
Phone booted into TWRP
Flashed SR1-SuperSU-v2.79-SR1-20161221223537.zip
Wiped cache / dalvik
Rebooted system from TWRP and waited. System is really smooth now, no issues yet. Been playing with it for awhile now.
During the booting up process it might take a minute and it will reboot twice. Dont get nervous like I did thinking it was going to start bootlooping. It booted just fine. I read in a nother thread that SuperSU is what causes it to boot twice.
So......Now I have OOS 4.0 Nougat, Rooted, Encrypted and everything seems to be working fine.
[How to root] Honor 6x -B367- with Magisk 14
(fast method for professional users)
Use TWRP Recovery from the attachment.
Make a Backup first.
Uninstall SuperUser App-
[*]in TWRP flash unSu.zip-
[*]with TWRP restore the Stock Kernel (Boot Partition) from a backup-
[*]flash in TWRP Magisk-v14.0.zip-
[*]the magisk app is automatic installed .
[*]Reboot-
[*]flash in TWRP BusyBox-Magisk-1.25.zip-
[*]for Ad Block Plus first install the app and then flash the zip-
[*]if the flashing fails, please add the modules in the Magisk Manager App.
[*]Don't experiment with Xposed!
[*]The SafetyNet is thereby lost.
TWRP:
https://mega.nz/#!9l0jFQaZ!WJipSNyrecAuyok4Wpp_NM6fxWyFPWwn2aP34tW50sU
There's no point in installing MagiskManager. When you flash Magisk.zip, it automatically installs the manager apk. If your phone is not rooted, all you have to do is to flash the Magisk.zip in TWRP and that's it.
Thanks for your feedback. I will change the tuto immediately.
Can somebody share the boot.img for c432b367?
Thanks guys!
actually you can fix safetynet in honor 6x:
1. disable Hisuite HDB in settings>advanced settings>security
2. Go to developer options and enable adb debuging
3. go to apps and go to google play services and force stop it. and clear data (you know how to do it...)
4. run safetynet test
5. profit?
NOTE:you'll do this again if you reboot it except number 1...
EDIT: it works for me in my stock rom but IDK in other roms...
https://i.imgur.com/J8obP1l.png
I keep getting "error: cannot load 'berlin311'" when trying to flash twrp
Please help
If we have twrp from open kirin team installed, do we still need to flash this twrp or can use the same one?
Just realized that this is the same OpenKirin TWRP. Proceeding with Magisk for the first time now
Any thoughts on the error loading twrp?
Challah said:
Any thoughts on the error loading twrp?
Click to expand...
Click to collapse
I did not face any issue.. Was smooth. I am using magisk now
shashank1320 said:
I did not face any issue.. Was smooth. I am using magisk now
Click to expand...
Click to collapse
Sadly that doesn't help me much
Challah said:
Sadly that doesn't help me much
Click to expand...
Click to collapse
Which version of the are you using. I had one from open kirin team. Are you trying to boot to recovery with USB connected? Are you on emui 4/5?
Emui 5, tried using both versions, the one from your thread and the one from the kirin team thread.
Challah said:
Emui 5, tried using both versions, the one from your thread and the one from the kirin team thread.
Click to expand...
Click to collapse
Both are same file. Not sure why this issue. I flashed today couple of hours ago to install magisk as i did fload to be on stock.
I have tried all the guides, same issue each time.
My phone is unlocked, but I get an error loading the img
Challah said:
I have tried all the guides, same issue each time.
My phone is unlocked, but I get an error loading the img
Click to expand...
Click to collapse
Did you try relocking amd unlocking the bootloader again? Try once buddy
I figured it out, I had adb installed previously and it was opening it from a different place than I expected, so Berlin was in the wrong folder.
shashank1320 said:
Did you try relocking amd unlocking the bootloader again? Try once buddy
Click to expand...
Click to collapse
Only unlocking with unlock code. That's enough. Then activate OEM unlock and Debugging Mode in the Settings.
ChinHon said:
Only unlocking with unlock code. That's enough. Then activate OEM unlock and Debugging Mode in the Settings.
Click to expand...
Click to collapse
Working for me buddy. I was helping him as he had issue
Thanks for this..i got the confidence and was able to install magisk without issues which was not doing earlier
When on the step to flash busybox_magisk I get notified that magisk is not installed, magisk needs to be installed first, and then error "Updater process ended with ERROR: 1 Error installing zip file '/external_sd/BusyBox-Magisk-1.25.zip'?
I flashed magisk again, rebooted to recovery, tried busybox-magisk again, same error.
After using this phone for a while I decided to root it.
I unlocked bootloader, installed TWRP and flashed Magisk, but all I get is bootloop or stuck on bootlogo (your device has been unlocked.....)
SOLUTION
https://forum.xda-developers.com/moto-z-play/how-to/guide-how-to-magisk-root-xposed-oreo-8-t3743273
Applicable also for moto Z2 Play, just with appropriate recovery, of course
Please note the updates to the first post. It may be necessary to do the procedure twice.
I tried these TWRPs:
3.2.3.0
64bit 3.2.1
and TWRP and modified magisk from https://forum.xda-developers.com/z2-play/how-to/guide-twrp-root-t3667769
I tried all TWRPs with both modified magisk and official v18.
I have XT1710-09 with Oreo and October security patch
Is there a way to root this lastest firmware?
Thanks
Klen2 said:
I tried these TWRPs:
3.2.3.0
64bit 3.2.1
and TWRP and modified magisk from https://forum.xda-developers.com/z2-play/how-to/guide-twrp-root-t3667769
I tried all TWRPs with both modified magisk and official v18.
I have XT1710-09 with Oreo and October security patch
Is there a way to root this lastest firmware?
Thanks
Click to expand...
Click to collapse
I did 3.2.3-0 TWRP method (by Junior Passos) on my XT1710-06 device with 8.0 on August 1 security patch (purposefully neglected updating any further cause method was tested exactly up to August patch according to Passos) and everything seems working pretty fine for a month now. Think I've installed no Magisk modules other than Xposed systemless yet and I've no interest in SafetyNet as well, so not deeply tested either. Don't know for sure, but I guess there's a good chance for such method to work on October patch too. Just be sure to perform every step as it is now in the 3.2.3-0 OP. One word of advice: after performing TWRP backup, look for it in /system/media and move it to both external and internal SDcards just in case something goes wrong (usually because of a missed step, I can say)... Also: I recommend to install Magisk v17.1 first time; then, if you want, update to v18 but right from the installer...
Sent from my Moto Z2 Play using XDA Labs
Strange, I have zero magisk problems when using the latest stock rom. Flash in twrp, done, no issues. However, it could be because I first back up boot and system and then restore them with twrp before rooting(this removes encryption).
Have these steps worked for me...
1.)Flash TWRP using Fastboot
2.)Go to TWRP/Settings and open Terminal.
3.)Run both of following commands:
echo KEEPVERITY=true>>/data/.magisk
echo KEEPFORCEENCRYPT=true>>/data/.magisk
Click to expand...
Click to collapse
4.)Flash Magisk-v17.1.zip
5.)Repeat step 2 and 3 dont wipe.
6.)Start
NOTE: before Reinstall stock or uninstall Magisk.
I did the Junior Passos method of doing the backup, and everything is working like a charm.
Cupcake 1.5 said:
Strange, I have zero magisk problems when using the latest stock rom. Flash in twrp, done, no issues. However, it could be because I first back up boot and system and then restore them with twrp before rooting(this removes encryption).
Click to expand...
Click to collapse
Hi, Could you please, tell me which stock ROM you are using and where is possible to get it?
First time I am having problem with Magisk, never had on other phones.
Problem = Bootlop
OldUncle said:
Hi, Could you please, tell me which stock ROM you are using and where is possible to get it?
First time I am having problem with Magisk, never had on other phones.
Problem = Bootlop
Click to expand...
Click to collapse
It's not what rom but, how you do it. When on stock ROM, it is encrypted so you must first back up system and boot and then immediately restore them, this remove encryption. Now flash magisk and it will work.
Cupcake 1.5 said:
It's not what rom but, how you do it. When on stock ROM, it is encrypted so you must first back up system and boot and then immediately restore them, this remove encryption. Now flash magisk and it will work.
Click to expand...
Click to collapse
Perfect!
Thank you very much!
The only solution which worked!
Finally I got full control on my Z2 Play.
Cupcake 1.5 said:
It's not what rom but, how you do it. When on stock ROM, it is encrypted so you must first back up system and boot and then immediately restore them, this remove encryption. Now flash magisk and it will work.
Click to expand...
Click to collapse
Regarding backup, this is done through the stock ROM correct (Settings --> System --> Backup to Google Drive).
Thanks,
smithmal
Cupcake 1.5 said:
It's not what rom but, how you do it. When on stock ROM, it is encrypted so you must first back up system and boot and then immediately restore them, this remove encryption. Now flash magisk and it will work.
Click to expand...
Click to collapse
This worked perfectly on my Moto Z2 XT1710-06 with Oreo 8.0 when no other options worked.
Flash or Boot into TWRP
Backup System and Boot partitions in TWRP
Restore System and Boot Partitions in TWRP (note I had to enable R/W access in TWRP to restore the system partition)
Flash Magisk-v19.3.zip
Reboot
That is it. Now Rooted and passes all SafteyNet test. No more restricted apps. Even Google Pay now works.
Thank You.
sick
Cupcake 1.5 said:
It's not what rom but, how you do it. When on stock ROM, it is encrypted so you must first back up system and boot and then immediately restore them, this remove encryption. Now flash magisk and it will work.
Click to expand...
Click to collapse
your method worked like charm, thanks alot man
LG V30 T-Mobile H932 20r ROM
For U.S. T-mobile H932 ONLY. Do NOT install this on any other V30/V30+/V30S except U.S. T-mobile H932. You will brick your phone.
DISCLAIMER : I do not hold responsiblity for any of the following but not limited to : Bricks due to not reading, nuclear war, cat dying. I will not be held responsible for any damage of any kind due to the result of this zip. It is held under your own risk. This does not mean that i wont help in any way shape or form to recover from anything that may happen at the result of flashing this zip. PLEASE FLASH RESPONSIBLY! PS. This zip has NOT been tested by me!
This Rom is 100% Stock. Most recent TWRP should first be installed. Then you can install this Rom and have Oreo with working TWRP.
This zip is created from the original KDZ. It contains almost the complete 20r firmware, but the partition table rewriting part and recovery image is removed. I changed the system.img, so you do not have to reinstall TWRP (recovery-from-boot.p deleted) when ROM once booted. I also changed the partition size of system.img, so the vendorized people can install this too without having problems because of a too small system partition. This is a continuation of westwood24's idea and work, I've updated it to the newest fw version and edited / advanced it a bit. I followed his idea and made this for users who can not take OTA's because they have Custom Recovery / Root installed.
Features
Stock build made from official KDZ
Stock Build.prop
Unrooted
system.img modified to keep TWRP
System image size shrunk for being able to flash this on a smaller system partition, mainly caused by vendorizing
Removed dm-verity
Removed rctd (LG's root checker tool daemon)
Enabled opt-encrypt, it's your choice now if you want to encrypt your phone, it's no more forced. TWRP now is capable of decryption (both AOSP and stock) since a few versions
Added DTS build prop
Added all lockscreen weather animations build prop
Installation
What you need
Unlocked Bootloader [How to do]
Working TWRP installed (should be installed already, otherwise you wouldn't need this zip )[Link to newest unofficial TWRP]
When you need Root, Latest Magisk [Download]
H93220r.zip [Download]
How to install
When you are still on Nougat,
you should start fresh: Reboot to recovery using button combo or reboot app (needs root; btw, Magisk offers this possibility too: Menu -> Modules -> three dot menu top right - Reboot to recovery)
Then flash this TWRP.img via image flashing function in TWRP, reboot to recovery again (for fully working new recovery) and do a backup, then copy this backup to your PC.
Then initiate a factory reset. Wipe your system partition too in TWRP advanced wiping menu, copy the 20r firmware zip to your SD and install it. Reboot and enjoy
From Oreo:
For clean install: Factory reset and wipe system
You can also keep your data by simply dirty flashing the zip. *Be aware that problems may occure, maybe you need to do a factory reset to start fresh*
Flash the 20r zip, then Magisk zip when you need root, then reboot to System = you're DONE
P.S.: could be, that you first need to boot up your fresh install and set it up before you can flash magisk.
At the first time you boot to system, it can be TWRP says No OS installed. You can ignore it.
If TWRP asks if you want to install SU, hit no (in newest TWRP SU is disabled, and the option to install the TWRP app is disabled too.)
Rom Version
Android Version: 8.0 Oreo
Android security patch level: 2019-1-1
Don´t forget to hit the thanks-button if you like this zip! :good:
You want to help me with a [donation?] Not asking for it, I have fun doing this for you, but feel free...
#RESERVED
Please to anyone who had issues with the zip.....
We have a fix!
Flash this zip
https://www.androidfilehost.com/?fid=1395089523397908552
Then flash a rom from your SD CARD
ONLY FLASH THIS OF YOU HAD A BRICK FROM 20R!!
Zip is live! Enjoy!
your zip name is wrong.. should be h93220r* ( it doesnt matter but i was confused at first)
also, i flashed it and nothing happened. my system is still the same as i was before (20p)
and in the script, i think it says 'model=VS996' or something. since it just words, it may not matter.
but maybe you used the wrong script for h932
In any case, the zip did nothing for me. flashing only took about 10 secs in total, and flashing system barely took a second.
So seems theres an issue with the zip. Maybe upload didn't quite finish as I did it while at work via rdp to my pc at home. Will look into it when I get off work
JohnFawkes said:
So seems theres an issue with the zip. Maybe upload didn't quite finish as I did it while at work via rdp to my pc at home. Will look into it when I get off work
Click to expand...
Click to collapse
Did you remove the file?
Sent from my LG-H932 using XDA Labs
BROKEN1981 said:
Did you remove the file?
Sent from my LG-H932 using XDA Labs
Click to expand...
Click to collapse
For now yes. Everyone was having issues. I'm on my way home from work right now so it'll be back online in probably an hour
JohnFawkes said:
For now yes. Everyone was having issues. I'm on my way home from work right now so it'll be back online in probably an hour
Click to expand...
Click to collapse
Ahh ok, thought I was missing something.
Sent from my LG-H932 using XDA Labs
JohnFawkes said:
For now yes. Everyone was having issues. I'm on my way home from work right now so it'll be back online in probably an hour
Click to expand...
Click to collapse
looking forward to the fix.
I figured people might want these files.
Root-System-Media
Uploading new zip now! figured out all issues
JohnFawkes said:
Uploading new zip now! figured out all issues
Click to expand...
Click to collapse
Awesome thank you!
Sent from my LG-H932 using XDA Labs
BROKEN1981 said:
Awesome thank you!
Sent from my LG-H932 using XDA Labs
Click to expand...
Click to collapse
no problem. should be live in about 15 minutes
zip is live!
Awesome. Woke up this morning to the system update notification. Glad there are still T-Mobile users around here that works to get this stuff out. Downloading now. Will report back after I flash it.
---------- Post added at 07:43 AM ---------- Previous post was at 07:19 AM ----------
BROKEN1981 said:
I figured people might want these files.
Root-System-Media
Click to expand...
Click to collapse
Are these new in this update?
JohnFawkes said:
zip is live!
Click to expand...
Click to collapse
At the end of the flash it looks like it flashed fine but then it tells me it failed to mount everything. When I go to reboot into the system it tells me there is no OS. I was just going to flash the 20p zip I had but then it restarted and now I can't get into TWRP again. Now it just restarts into fastboot mode
UPDATE: I was able to get back into TWRP by going through the factory reset option (Volume down + Power, etc.) I'm now flashing the 20p zip I have.
UPDATE 2: Didn't work. Got into a bootloop. Restoring an old Lineage backup I have. Should have made a backup of my current state before flashing but I wasn't thinking
UPDATE 3: That didn't work either. Everything I flash it tells me failed to mount '/persist-lg' and just boot loops. I guess the next thing to do is try and use LGUP to restore
Same here as above. Doesnt mount system persist cache.
sunmybun said:
Same here as above. Doesnt mount system persist cache.
Click to expand...
Click to collapse
Flashing anything else doesn't fix it either. My phone is chillin' in recovery mode until I can figure it out
im working on fix guys. zip is removed for now. no clue why this is happening. but a fix is being worked on
JohnFawkes said:
im working on fix guys. zip is removed for now. no clue why this is happening. but a fix is being worked on
Click to expand...
Click to collapse
Thanks. Searching around, I see there have been people having issues like this before with other devices. Something to do with the persist.img. Did the last zip include one? Also, I hope whatever it is can be fixed with a new zip. I don't know why restoring a backup or flashing an old full stock zip wouldn't fix anything.
This is basically what I'm getting
http://en.miui.com/thread-467490-1-1.html
So today with some testers i managed to make root on OnePlus 7T, I want to specify that 95% of the work was done by @topjohnwu (Magisk creator). For now you should use only Magisk Canary files
I will explain 2 different guides:
First Root Guide:
This guide is for a specific rom version, so you will need to use a specific patched boot.img
- Download the patched_boot.img
- Reboot your device in bootloader-fastboot mode
- Flash the patched_boot.img in the boot partition:
Code:
fastboot flash boot boot.img
replace "boot.img" with the patched_boot.img path
- Reboot the device
- Install Magisk Manager
Second Root Guide:
This guide is more generic than the first one, you should use this one if you are unable to find a specific patched boot.img
- Download a patched_boot.img (you should try with the latest one)
- Reboot your device in bootloader-fastboot mode
- Boot the patched_boot.img:
Code:
fastboot boot boot.img
replace "boot.img" with the patched_boot.img path
- Reboot the device
- Install Magisk Manager
- Click on Install, then direct install and wait the end of the process
- Reboot the device
Third Root Guide:
Guide by @gpz1100
TIPS:
Actually you should use only Magisk canary files Magisk 20.3
You can get the stock boot images from the fastboot rom: https://forum.xda-developers.com/oneplus-7t/how-to/rom-stock-fastboot-roms-oneplus-7t-t3979213
Actually i'm using magisk manager canary and magisk canary debug to patch the boot.img, I don't recommend updating magisk, if you don't want to see the updates install the normal magisk manager
Magisk 20.3 fully support OnePlus 7T and 7T Pro
HOW TO UPDATE a ROM and KEEP ROOT:
Before all Disable all magisk modules
Be sure to use Canary Magisk Manager and Canary Magisk (debug)
You can update a stock rom from phone settings with local upgrade:
- Update the Rom WITHOUT REBOOT;
- Open Magisk Manager;
- In Magisk Manager, click on Install/Install/Direct Install;
- Again in Magisk Manager, click on Install/Install/Inactive Slot;
- Reboot.
Download:
Patched/Stock Boot Images: https://www.androidfilehost.com/?w=files&flid=300177
Reccomended ADB and Fastboot binaries:
Adb and Fastboot Installer
Donations:
Credits:
@RohanAJoshi
Flashed and working flawless.
Really thanks for this.
Awesome work bro.
Can you please upload the patched boot.img please? I dont see it in the above folder at all.
nick_22 said:
Can you please upload the patched boot.img please? I dont see it in the above folder at all.
Click to expand...
Click to collapse
Done, i uploaded them using ftp and i forgot to move the files in the right folder
Working, thanks a lot @mauronofrio
I am on 10.0.3 begin so i should flash the magisk patched boot image of this version, is that correct? With what should i flash, sdk tools or any other specific tool? Is there any portable adb toolkit and do i need to copy the not image in the same folder as adb?
Edit : I tried but the device was locked so unlocked it after finding instructions on xda. Never knew it would wipe everything including internal storage also
Need to install everything again and have lost data of last few days. But I got root so that's the only consolation. Also a lesson never to make unnecessary haste. But it's fine. Won't repeat the mistake again.
jesrani said:
I am on 10.0.3 begin so i should flash the magisk patched boot image of this version, is that correct? With what should i flash, sdk tools or any other specific tool? Is there any portable adb toolkit and do i need to copy the not image in the same folder as adb?
Edit : I tried but the device was locked so unlocked it after finding instructions on xda. Never knew it would wipe everything including internal storage also
Need to install everything again and have lost data of last few days. But I got root so that's the only consolation. Also a lesson never to make unnecessary haste. But it's fine. Won't repeat the mistake again.
Click to expand...
Click to collapse
See OP, its clearly mentioned there. You have to flash this via fastboot and not any custom recovery. Firstly setup adb on your PC and then check the commands. Its very easy. Do some googling and still if its difficult for you, come back and ask.
jesrani said:
I am on 10.0.3 begin so i should flash the magisk patched boot image of this version, is that correct? With what should i flash, sdk tools or any other specific tool? Is there any portable adb toolkit and do i need to copy the not image in the same folder as adb?
Edit : I tried but the device was locked so unlocked it after finding instructions on xda. Never knew it would wipe everything including internal storage also
Need to install everything again and have lost data of last few days. But I got root so that's the only consolation. Also a lesson never to make unnecessary haste. But it's fine. Won't repeat the mistake again.
Click to expand...
Click to collapse
Welcome to the android scene, reminds me of the old psx scene
I installed some rogue module, that was not supposed to be installed on OP 7T. Due to this, now I am not able to boot into patched boot. I had to re-flash my stock boot.img to boot into my phone. Can you please help? I want to uninstall that particular module thats all. Tried doing something with your TWRP, but it wont show my system or storage at all.
@mauronofrio, thanks so much for this. I had some queries :
1) Is the internal storage always wiped when bootloader is unlocked or did I do something wrong?
2) I have switched off auto-download of updates and also disabled automatic system updates in Developer settings. Is this correct? How to proceed when an update is available in future?
3) Will TWRP be developed or is it not useful for OP7T?
nick_22 said:
I installed some rogue module, that was not supposed to be installed on OP 7T. Due to this, now I am not able to boot into patched boot. I had to re-flash my stock boot.img to boot into my phone. Can you please help? I want to uninstall that particular module thats all. Tried doing something with your TWRP, but it wont show my system or storage at all.
Click to expand...
Click to collapse
Get your stock boot.img from 1st post.
Reboot to bootloader.
And do this command
fastboot flash boot boot.img
fastboot reboot
Device will boot unrooted.
---------- Post added at 05:58 AM ---------- Previous post was at 05:55 AM ----------
jesrani;80464121 [user=4712355 said:
@mauronofrio[/user], thanks so much for this. I had some queries :
1) Is the internal storage always wiped when bootloader is unlocked or did I do something wrong?
2) I have switched off auto-download of updates and also disabled automatic system updates in Developer settings. Is this correct? How to proceed when an update is available in future?
3) Will TWRP be developed or is it not useful for OP7T?
Click to expand...
Click to collapse
1. Yes, always wipe
2. Just update as usual, let update go, after installation complete, don't reboot device. Go to magisk, install, install on inactive slot. Reboot. You will be rooted (Warning : this is not tested on 7T, this method from 7)
3. TWRP will be developed but some good dev like @mauronofrio need device for this, as of now, no hopes for twrp. We are lucky that we got root.
RohanAJoshi said:
1. Yes, always wipe
2. Just update as usual, let update go, after installation complete, don't reboot device. Go to magisk, install, install on inactive slot. Reboot. You will be rooted (Warning : this is not tested on 7T, this method from 7)
3. TWRP will be developed but some good dev like @mauronofrio need device for this, as of now, no hopes for twrp. We are lucky that we got root.
Click to expand...
Click to collapse
Thanks. Yes, root is good enough right now.
By "update as usual", do you mean through OTA? I think the phone reboots after update is downloaded and then installs the update but not sure. So once it reboots after updating, should I go to Magisk and install root?
Should I keep Magisk update channel to Canary or Canary(Debug)? It's already showing an update as available. Should I update it?
jesrani said:
Thanks. Yes, root is good enough right now.
By "update as usual", do you mean through OTA? I think the phone reboots after update is downloaded and then installs the update but not sure. So once it reboots after updating, should I go to Magisk and install root?
Should I keep Magisk update channel to Canary or Canary(Debug)? It's already showing an update as available. Should I update it?
Click to expand...
Click to collapse
In older devices like OP5T it happens like this, not in newer devices. OP7T has seamless updates, its installs while device is turned on in second partition.
nick_22 said:
I installed some rogue module, that was not supposed to be installed on OP 7T. Due to this, now I am not able to boot into patched boot. I had to re-flash my stock boot.img to boot into my phone. Can you please help? I want to uninstall that particular module thats all. Tried doing something with your TWRP, but it wont show my system or storage at all.
Click to expand...
Click to collapse
So, modules are saved in /data , the only way to remove them without root actually is wiping data, if you can't now, you can just flash the stock boot.img because without root the modules can't work. Usually you can remove all magisk stuff using magisk uninstaller.
jesrani said:
@mauronofrio, thanks so much for this. I had some queries :
1) Is the internal storage always wiped when bootloader is unlocked or did I do something wrong?
2) I have switched off auto-download of updates and also disabled automatic system updates in Developer settings. Is this correct? How to proceed when an update is available in future?
3) Will TWRP be developed or is it not useful for OP7T?
Click to expand...
Click to collapse
1) yes
2) for rom updates i will pubblish a guide in the first post in some minutes
3) yes it will be developed but actually is needed a bit of time because twrp is not working for op7t (due to android 10)
mauronofrio said:
So, modules are saved in /data , the only way to remove them without root actually is wiping data, if you can't now, you can just flash the stock boot.img because without root the modules can't work. Usually you can remove all magisk stuff using magisk uninstaller.
1) yes
2) for rom updates i will pubblish a guide in the first post in some minutes
3) yes it will be developed but actually is needed a bit of time because twrp is not working for op7t (due to android 10)
Click to expand...
Click to collapse
Should I keep Magisk update channel to Canary or Canary(Debug)? It's already showing an update as available. Should I update it?
jesrani said:
Should I keep Magisk update channel to Canary or Canary(Debug)? It's already showing an update as available. Should I update it?
Click to expand...
Click to collapse
Canary debug, don't update it
Help please. I have returned to Android after 5years with OnePlus 7t and trying to root it. I am trying this method but not being able to successfully root it. Steps I have tried
Went to fastboot mode by restarting the phone but I don't get an option to install the patched image file. And even boatloader is locked. Do I need to unlock the bootloader. And I unlock will I loose my data. Sorry for silly question I have completely forgot about Android.
Thanks, rooted successfully
?
To be honest need video tutorial asap?
mauronofrio said:
So, modules are saved in /data , the only way to remove them without root actually is wiping data, if you can't now, you can just flash the stock boot.img because without root the modules can't work. Usually you can remove all magisk stuff using magisk uninstaller.
1) yes
2) for rom updates i will pubblish a guide in the first post in some minutes
3) yes it will be developed but actually is needed a bit of time because twrp is not working for op7t (due to android 10)
Click to expand...
Click to collapse
Ok. Got it. So, I have already booted back to unrooted mode now. And I cant wipe my data again. Thanks for your response.