[ROM] [8.1.x] LineageOS 15.1 UNOFFICIAL Builds (pme) - HTC 10 ROMs, Kernels, Recoveries, & Other Developm

[ROM] [8.1.x] LineageOS 15.1 UNOFFICIAL Builds (pme) - HTC 10 ROMs, Kernels, Recoveries, & Other Developm

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 15.1 is a free, community built, aftermarket firmware distribution of Android 8.1.x (Oreo), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
Take a backup first from your actual system!
Before instaling, make sure you are running the latest Oreo firmware from the latest HTC Sense.
If you are encrypted but running an AOSP ROM then you're fine. If you come from Sense, take a full backup of all your data, boot into TWRP and format data (the option which requires you to type "yes") and clean flash accordingly. This is due to encryption changes. Do not skip this step or you will be locked out of your system by a password prompt.
If you are coming from any other ROM wiping /system & /data is strongly recommended
Download the latest build and GApps (both links are below).
Reboot to TWRP.
Flash the latest build and GApps.
Reboot and enjoy (as much as currently possible)
Downloads:
ROM: lineage-15.1-20180826-UNOFFICIAL-pme.zip
GAPPS: OpenGapps
Known Issues:
Woofer / Loudspeaker ( amplifier issue )
IMS - VOLTE
SlowMo
SeLinux permissive ( will be fixed when the bugs are fixed )
Reporting bugs:
Grab a logcat right after the problem has occurred (please include at least a few pages of the log, not just the last few lines, unless you know what you're doing).
If it is a random reboot, grab /proc/last_kmsg (do not bother getting a logcat unless you can get it just before the reboot, a logcat after a reboot is useless).
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved.
Credits:
LineageOS Team & Contributors
Code Aurora Forum
@crpalmer ( He left from the project )
Special thank you who send me donations: ( both AOSiP & LOS )
- @The Fer-Shiz-Nizzle
- @fantamadnesss
- @_Sherrif
- @Roocher
- @scutworker
- @synaesthesics
- @MrN1484
- @Galdrapiu
- @Chucktr
- @guest
- @kdrkdr
- @heyChristo
Source code:
LineageOS Gerrit Review
Kernel source
Device source
Vendor source
XDA:DevDB Information
[ROM] [8.1.x] LineageOS 15.1 UNOFFICIAL Builds (pme), ROM for the HTC 10
Contributors
fagyi
Source Code: https://github.com/LineageOS/android
ROM OS Version: 8.x Oreo
ROM Firmware Required: Oreo
Based On: LineageOS
Version Information
Status: Testing
Created 2018-06-25
Last Updated 2018-08-27

Changelogs
CHANGELOGS
Code:
[SIZE="3"][CENTER][B]2018.08.26.[/B] [/CENTER][/SIZE]
All LOS changes are merged
[CENTER][B]Device:[/B][/CENTER]
pme: power & thermal: fixes hals
pme: configure audio from CAF msm8996
pme: extract: fix a typo
pme: init: fixup perfd
pme: rootdir: one type correction
pme: Fix compiler warning in RIL shim
pme: Convert libhtcril_db makefile to blueprint
pme: Convert libshims makefile to blueprint
pme: Boardconfig: remove duplicate flag
pme: rootdir: move firmware link to the init.target.rc
pme: rootdir: remove htcnetd service
pme: vndk-sp is no vendor module
pme: Link /vendor to /system/vendor for devices without a vendor part
pme: audio: kill offload
pme: Convert audio_effects.conf to XML
pme: props: remove unused and duplicates
pme: rootdir: more cleanup
pme: fix dt2w
[CENTER][B]Kernel:[/B][/CENTER]
Upstreamed to 3.18.119 stable kernel tag from caf
[CENTER][B]Vendor:[/B][/CENTER]
pme: update ims/volte blobs
[CENTER][B]2018.08.13.[/B] [/CENTER]
All LOS changes are merged
[CENTER][B]Device:[/B][/CENTER]
pme: init: fix nfc after caf merge
[CENTER][B]2018.08.12.[/B] [/CENTER]
All LOS changes are merged
August security updates
[CENTER][B]Kernel:[/B][/CENTER]
Upstreamed to 3.18.118 stable kernel tag from caf
Rebased EAS from marlin
Few other optimizations
[CENTER][B]Device:[/B][/CENTER]
pme: thermal: bring inline marlin N thermal hal seems to this one work well on my device
pme: power: fixup voxpopuli N powerhal compatible, now running well
pme: power: switch to voxpopuli power hal - Switch back to N voxpopuli power hal - Switch to cfq IO scheduler and optimize
pme: overlay: snap: use the marlin configs - Fixes the preview issue which present on my device without these. - Also move under overlay-lineage instead of overlay
pme: rootdir: sync with caf - LA.UM.6.5.r1-09300-8x96.0 - Add init.target.rc - Update power setups, also remove the interactive gov setups
pme: Squash revert thermal commits
pme: overlay: doze: use marlin way
Revert "pme: Remove legacy lights HAL flag"
pme: add PRODUCT_PACKAGES for thermal as well - fixes build
pme: manifest: use 1.0 thermal hal
pme: wifi:switchback to 1.0 version - Matches with device service side.
pme: remove props - core_ctl props - perf related setup
pme: add thermal service - Matches with manifest
pme: remove QC perf related configs
pme: Disable debug.sf.recomputecrop
pme: cleanup
pme: Remove legacy lights HAL flag
pme: Drop useless CNE related flag
pme: Build a system version of [email protected] for imsvt
pme: power fixes - Switch back to 1.0 powerhal, because we dont have wlan stat support. - init: mount debugfs - fixes the rpm_stats issue from powerhal
Revert "pme: update to the latest Marlin powerhal"
Revert "pme: update device.mk to build 1.1 power as well"
pme: update device.mk to build 1.1 power as well
pme: update to the latest Marlin powerhal
Revert "pme: move IMS symlinks to vendor"
pme: Update call recording overlay.
pme: overlay: Snap: drop uneccessary settings
pme: init: remove duplicates - Already definied on init.power.rc
pme: add some audio flags
pme: move IMS symlinks to vendor - Switched to marlin prebuilt apps which is on vendor side now.
pme: power: add support for schedutil - which we are use as default: schedutil - Based on voxpopuli N power hals, but only support sched and schedutil governor
pme: kang marlin media configs - from Marlin - 8.1.0 (OPM4.171019.021.P1, Jul 2018)
pme: boardconfig: remove QC Power flags
pme: remove QC perf stack since moved to marlin perf stack - Setup marlin perf stack
pme: init: add marlin perfd service
pme: manifest: add thermal and switch 1.1 service as power as well
pme: Replacing copy headers with header libraries
pme: thermal-engine: Add thermal client library header
pme: Remove unused CPU flags
pme: power: Build with VNDK=current
pme: Rename powerhal and use new RPM system stats node
pme: Re-enable interactive boosting
pme: Bring in marlin power HAL
pme: update time-service - from bardock-pro - OPM1.171019.011 - Fixes: The phone doesn't keep time when turned off and on.
pme: Avoid kernel includes warning - use the new way: INSTALLED_KERNEL_HEADERS instead
pme: Move to the Audio HIDL HAL interfaces
pme: move XMLs to vendor
pme: update thermal service as marlin does - Also remove the VR config
pme: remove unused irq_balance config
pme: Use mke2fs to create ext4 images
[CENTER][B]2018.07.15.[/B] [/CENTER]
All LOS changes are merged
July security updates
[CENTER][B]Kernel:[/B][/CENTER]
Upstreamed to 3.18.115 stable kernel tag from caf
Rebased to EAS
Many optimizations
[CENTER][B]Device:[/B][/CENTER]
pme: remove libshim_power
pme: amplifier: remove hardcoded audio_amplifier.msm8996
pme: amplifier: bring back LOCAL_MODULE_TAGS := optional
pme: switch to wifi 1.1 package
pme: Do not enable broadcastradio by default
pme: Drop deprecated OpenGLRenderer props
pme: add treble flags
pme: Define Vendor security patch level
pme: add back vndk-sp-libs
pme: Reorder tetherable connection types
pme: amplifier: Fix building with VNDK
pme: rootdir: remove cpuset foreground boost
pme: rootdir: Move mm-pp-dpps to hal class
pme: Remove unused CPU flags
pme: rootdir: Setup for EAS + optimizations
pme: amplifier: add back liblog
pme: amplifier: one more typo fixes
pme: Update aptX blobs from marlin OPM1.171019.011
pme: Add IMS symlinks
pme: add /vendor/firmware to slpi symlinks
pme: symlinks: updates
pme: audio: rename to audio_tuning_mixer
pme: fix camcorder audio recording
pme: enable noatime mount option for CTS failure
pme: Remove [email protected] & [email protected] from...
pme: Remove implicitly built QTI camera shared libraries
pme: Set TARGET_PROVIDES_QTI_TELEPHONY_JAR
pme: Move qcamerasvr to main and restart on service restarts
pme: add back ipacm and ipacm-diag service's
pme: added FlipFlap for Iceview case
[CENTER][B]2018.06.24.[/B] - Initial testing release[/CENTER]

Frequently Asked Questions
Rule: NEVER ask for ETA
Q: Please add xyz features or fix UI/UX related bugs/regressions
A: All feature requests and UI/UX related stuff should go to LineageOS JIRA: https://jira.lineageos.org, I only take care of hardware-specific stuff.
Q: DT2W ( double tap to wake ) doesnt work for me, what can I do?
A: Please go to settings/display option and re-enable the double tap to wake feature.

Super excited about this!!!

Yes, i can tell you guys, this ROM works good, besides the already known (1 speaker works) issue.
I also had another issue but i can't say if it's some kind of conflict with the OpenGapps installation.
Some HTC apps seem to crash, for example the HTC Sense Launcher "<AppName> has stopped / Close App" messages keep popping up.
Everything else works perfect.

Thank you!!!

Thank you so much for this!!

Wow, right after I was thinking about abandoning htc stock software now and forever, your oreo version of Lineage OS just released!
Thank you and all the other Lineage os developers soooo much, you are our everyday hereo!

Thank you so much for openning a dedicated thread for LOS.
It seems you are the only one, along team venom, who is still supporting our device now.
Great work.

I just want to also say thank you for your hard work supporting an excellent device, which is the 10.
I hope other teams are inspired by your work and give the 10 a chance, it would be amazing to see other ROMs take off as well!

Thanks so much for supporting the HTC and bringing LineageOS to us.
I was going to sell mine, but will be keeping it just because I can now continue with Lineage on the phone.
Good luck with it. I've sent you a small donation. Wish it could be more.
Cheers!

scutworker said:
Thanks so much for supporting the HTC and bringing LineageOS to us.
I was going to sell mine, but will be keeping it just because I can now continue with Lineage on the phone.
Good luck with it. I've sent you a small donation. Wish it could be more.
Cheers!
Click to expand...
Click to collapse
Hello @scutworker!
Thank you so much for your donation. I appreciate it for you effort
Hopefully the LOS it will be complate soon.
Have a nice day,
fagyi

Over heating Issue with this ROM while charging.
Volume is very Low.
HTC Sense Launcher crashes.
I used this ROM and these are the Issues i found in this ROM, else it's and excellent ROM.

djp007s29 said:
Over heating Issue with this ROM while charging.
Volume is very Low.
HTC Sense Launcher crashes.
I used this ROM and these are the Issues i found in this ROM, else it's and excellent ROM.
Click to expand...
Click to collapse
No offence, but why would anyone use Sense Launcher on Lineage/AOSP?
I mean, the reason I look for a good AOSP ROM is to move away from Sense. If I liked Sense, I would stay stock!

I am on AOSIP right now and my biggest issue is GPS locks. Does GPS work better in LOS?

errikosd said:
No offence, but why would anyone use Sense Launcher on Lineage/AOSP?
I mean, the reason I look for a good AOSP ROM is to move away from Sense. If I liked Sense, I would stay stock!
Click to expand...
Click to collapse
Well i like HTC Sense Launcher, but to have a Custom Rooted ROM where you can do so much more with this ROM compared to stock ROM AND to have HTC Sense Launcher also in it, why not? little bit of both worlds mixed together so to speak.

errikosd said:
No offence, but why would anyone use Sense Launcher on Lineage/AOSP?
I mean, the reason I look for a good AOSP ROM is to move away from Sense. If I liked Sense, I would stay stock!
Click to expand...
Click to collapse
HTC Sense is far more better than other launcher, easy to use and organise folders, Plus people who uses news feed, for them HTC Sense Launcher is the best.

Is the cellular standby bug, when turning mobile data on, from Oreo Sense still present in Lineage 15 or was it possible to fix it?

In the latest build camera apps doesn't record audio. Though, recorder app works fine.
In past build this was ok.

How about boomsound ??

Related

[ROM] AOSiP 7.0 - Oreo [EAS ✓] [OMS - Coming soon ] [8.0.0_r35] - 19.12.2017

ChangeLogs
Special thank you who send me donations:
- @The Fer-Shiz-Nizzle
- @fantamadnesss
- @_Sherrif
- @Roocher
Device changes :
https://github.com/Fagyi/android_device_htc_pme/commits/aosip-oreo
Kernel changes:
https://github.com/Fagyi/htc_pme_kernel/commits/IceMan
AOSiP changes:
http://review.aosiprom.com
19.12.2017 - AOSiP 7.0 -
AOSiP-7.0-EAS-pme-20171219zip
MD5: a588bfe435fc21561b2b9dbab409e9b1
Device:
- pme: cleanup Android.mk
- pme: move idc to configs/idc
- pme: Revert "pme: camera: properly shim DisplayEventReceiver for ZEUSIS Algo"
- pme: camera: fix preview format missmatch when using gralloc1
- pme: fixup camera on hwc2
Vendor:
pme: update blobs:
- Add ims app
- Add imssettings
- Add QtiTelephonyService
- Add CNEService
- Add qcrilmsgtunnel
- Update & add ims librarys
- Update some camera related blobs
- Update CNE librarys
- Update DRM library
- Update TimeService library
- Update graphich librarys
- Update GPS librarys
- Update Sensor librarys
Searching my night display update.zip when I found it, uploading too.
Older changes
11.12.2017 - AOSiP 7.0 -
December security updates and all upstream changes already merged!
Device:
- pme: port over marlin cpusets setups
- pme: remove ENABLE_CPUSETS and ENABLE_SCHEDBOOST
- pme: remove ipacm / ipanat
- pme: Move location files from /data/ to /data/vendor/
- pme: Update variant script with new gps.conf location
- pme: Apply fix to Sprint gps.conf
- pme: rootdir: fix a typo, thanks @tabp0le
- pme: switch to the binderized audio hal
- pme: manifest: fix a typo
- pme: update seccomp policy from LA.UM.6.5.r1-04000-8x96.0
- pme: vr: modules is device dependent
- pme: switch to the new HWC2 and GRALLOC1
- pme: power: Add open function for power module
- pme: thermal: Add thermal send rule socket to thermal service init
- pme: Enable width/height swap feature for H.264 codec
- pme: manifest: Add display hals.
- pme: manifest: add vendor.qti.qcril.am
- pme: move audio configs to vendor
- pme: Add vndk sp libraries to system lib
- pme: update media_codecs configs from upstream
- pme: update sec_config from upstream
- pme: audio: reduce audio flinger standby delay
- pme: Add property to enable display default color mode
- pme: manifest: add vendor.display.postproc
- pme: vndk: remove one typo
- pme: Build libdisplayconfig
- pme: rootdir: some O related changes
- pme: audio_effect: move all things to vendor
- pme: update audio side from upstream
- pme: audio: rewrite mixer_paths_tasha from upstream
- pme: add [email protected]
- pme: final update's for audio
Kernel:
- Updated to Linux 3.18.86
- Updated to 'LA.UM.5.5.r1-06300-8x96.0'
- Backported oreo related audio features
- Backported oreo drm and msm/vidc changes
- pme: schedutil: make equal with render
- pme: vidc: fix incompatible pointer type
Vendor:
- pme: update graphics from LA.UM.6.5.r1-02500-8x96.0"
- pme: update sensors from LA.UM.6.5.r1-02500-8x96.0
- pme: update perf-profile's
- pme: add colorservice app
- pme: add iop related blobs
- pme: update graphich blobs
- pme: add missing iop blobs
Known issue: Night display since II moved to the new hwc2 and gralloc1
25.08.2017 - AOSiP 6.3
Device:
- pme: Add init.power.sh to manage EAS from marlin
- pme: drop init.qcom.power.rc and cleanup power congfigs
- pme: add camera label
- pme: power: remove duplicates
- pme: revert 60 fps support, because break the fullhd recording
- pme: cleanup for zram
- pme: rootdir: cleanup
- pme: Enable Core-control & MSM thermal
- pme: port over pxel thermal
- pme: power: add support for schedutil too
- pme: zram: setup more configs
- pme: Disable MSM thermal
- pme: power: sync with voxpopuli
- Revert "pme: make sure sepolicy loaded"
- pme: power: added voxpopuli tunables
- pme: Adjust audio configs and switch to XML audio config
ExFat its still bugos, because I need some modifications on source, because AOSP doesnt support ExFat at the moment, and I dont think that I want modify the upstream source. I give the idea for AOSiP lead developers.
Kernel:
- IceMan 1.5 EAS Bring up
- pme: defconfig: Regen for upstream 3.18.66
- pme: Merge tag 'LA.UM.5.5.r1-05700-8x96.0' into IceMan
- Backport 4.9 audio features
- Backport 4.9 rcu
- Backport 4.9 binder
- Bring back DTS eagly support
- Remove sound control for now
- Many many more look at the source code:
https://github.com/Fagyi/htc_pme_kernel/commits/IceMan
20.07.2017
Device:
- Revert "pme: Enable stereo camcorder audio recording" we dont need this one, already there
- pme: init: fix model names
E.g show Htc 10 instead of MSM8996 for arm64
Kernel:
- ASoC: wcd9335: Sound control
- ASoC: wcd9335: Sound control: allow further reduction of digital gain
- ASoC: wcd9335: add analog headphone gain
- ASoC: wcd9335: command line option to enable compander
- sound_control: fix merge error
- pme: enable Sound control
Other info that upstream moved to odexed build which i like it so much \O/
15.07.2017
Device:
- pme: fix bootanimation, converted to 1440p for our device's
- pme: selinux: remove sysinit permission because removed on upstream
- pme: selinux: Exfat cleanup
- pme: Allow vendor init to override props
- pme: Abandon TARGET_UNIFIED_DEVIVCE flag
- pme: fstab: Fix OTG mount device.
- pme: init.qcom.rc update to to LA.UM.5.5.r1-05100-8x96.0
- pme: import high speed encoder profiles
- pme: Enable stereo camcorder audio recording
Kernel:
-Merge tag 'LA.UM.5.5.r1-05300-8x96.0' into IceMan
-Merge tag '3.18.60' into IceMan
- Bring IceMan to 1.1
- msm: vidc: Fix broken debugfs creation error checks and error paths
- UPSTREAM: ext4: fix fencepost in s_first_meta_bg validation
- ext4: fix condition of validate s_first_meta_bg
- cpu-hotplug: convert cpu_hotplug_disabled to a counter
Vendor:
- Update google.xml from upstream ( For dozing playstore, gms, etc for battery )
07.07.2017
AOSiP 6.2 - with july security updates
Device:
- Revert "pme: Add board specific HotwordEnrollment"
- Revert "pme: Remove forced triple framebuffers"
- pme: remove some unused line for now
- pme: selinux: fix ExFAT
Kernel:
-Merge tag 'LA.UM.5.5.r1-05100-8x96.0' into IceMan
-Merge tag '3.18.59' into IceMan
. Bring IceMan to 1.0
Vendor:
- pme: update blobs from 2.48.617.11
- pme: ubdate wifi hal from 2.48.617.11
- pme: update qti blobs from 2.48.617.11
- Revert "pme: Add board specific HotwordEnrollment"
28.06.2017
Upstream changes
Device:
- pme: Update fingerprint for EU, Sprint, Unlocked
- pme: update prebuilts which missing
- pme: Add board specific HotwordEnrollment ( for OK Google, havent tested yet that its working or not )
- pme: Fix HDMI permissions
- pme: Remove BCL hotplug disable/enable from init
- pme: make sure sepolicy loaded
- pme: fix Selinux denials
Vendor:
- pme: Add board specific HotwordEnrollment
- pme: add com.qti.snapdragon.sdk.display.jar
So same as that before version, just reverted all the IMS/VoLTE commits for now
27.06.2017
Upstream changes
Device:
- pme: Update fingerprint for EU, Sprint, Unlocked
- pme: update prebuilts which missing
- pme: build com.android.ims.rcsmanager
- pme: props: add VoLTE/IMS props
- pme: Add IMS shim
- pme: Add board specific HotwordEnrollment ( for OK Google, havent tested yet that its working or not )
- pme: Add IMS symlinks
- pme: Correct wrong diag groups
- pme: Add inet capability to imscmservice
- pme: prop: enable service.qti.ims.enabled
- pme: Enable WIFI calling
( VoLTE it was enabled before )
- pme: Fix HDMI permissions
- pme: Remove BCL hotplug disable/enable from init
- pme: make sure sepolicy loaded
- pme: fix Selinux denials
Vendor:
- pme: Add board specific HotwordEnrollment
- pme: add com.qti.snapdragon.sdk.display.jar
21.06.2017
Upstream changes - AOSiP 6.1
Device:
- pme: Disable core control
Kernel:
- Merge tag 'LA.UM.5.5.r1-04900-8x96.0' into IceMan
- BFQ: update to BFQ-v8r10
- iosched_switcher: Ensure the previous elevator name is always present
- iosched_switcher: Remove unneeded code in change_elevator()
- ASoC: core: Don't assign an out-of-bounds address to rtd_aux
- ip6_gre: fix ip6gre_err() invalid reads
- dccp/tcp: do not inherit mc_list from parent
- lowmemorykiller: account for unevictable pages
- sched/rt: Avoid moving rt task if destination CPU does not run low priority task.
- sched: avoid scheduling RT threads on cores currently handling softirqs
- sched: avoid migrating when softint on tgt cpu should be short
- ANDROID: mmc: move to a SCHED_FIFO thread
- ion: adjust system heap pool orders
- bpf: don't let ldimm64 leak map addresses on unprivileged
- ext4: fix data exposure after a crash
- ipv6: Prevent overrun when parsing v6 header options
- sctp: do not inherit ipv6_{mc|ac|fl}_list from parent
- ipv6/dccp: do not inherit ipv6_mc_list from parent
- ipv6: fix out of bound writes in __ip6_append_data()
- net: add length argument to skb_copy_and_csum_datagram_iovec
- drivers: video: Add bounds checking in fb_cmap_to_user
- msm: mdss: install the rel_fence even if retire_fence is skipped
17.06.2017
Upstream changes
Device:
- pme: GPS lock fixes, GPS now working
- pme: Increase jpg quality to 100%
- pme: Enable Universal Bandwidth Compression for ISP
Kernel:
- crypto arm64 optimizations
- devfreq: Add an interface to boost devices on screen wake-up
- devfreq: Boost 'cpubw' on screen wake-up
- PM / devfreq: Reduce wake boost duration to 5000 ms
- pme: defconfig: Bring IceMan to V0.9
- arm64: strcmp: align to 64B cache line
11.06.2017
- pme: fixed wifi tethering / wifi hotspot
- pme: gps: Update to CAF LA.UM.5.5.r1-04000-8x96.0
- pme: Re-enable delete_aiding_data for user build
- pme: Update CarrierConfig overlay from upstream
- pme: audio_platform_info updated from stock
- Upstream changes
08.06.2017
- Android 7.1.2-R12 - June Security Patches already merged
- pme: overlay: add dhcp range for tethering
- pme: overlay: update power_profile from 2.46.617.2 base
06.06.2017
Device:
- Wifi tether seems to not working at the moment, but working on it, still debuging the problem.
- Some init.rc updates from stock
- Disable SIM batch operations - Hope it fixes the sim contact imports.
- Added mms.apk which is built from source
- System props updates
- Switched from CFQ to BFQ as the default scheduler
Kernel:
Kernel updated with LineageOS tree.
Kernel updated with LA.UM.5.5.r1-04700-8x96.0
Kernel updated with BFQ scheduler
Of course with all aosip upstream changes!
28.05.2017
- Upstream changes
- vendor repo updates from 2.46.617.2 base
- pme: use of the 'interactive' power state
- revert: pme: Adjust audio configs and switch to XML audio config ( Testing for BT call )
25.05.2017
- Upstream changes
24.05.2017
- Fix hardwarekeys features
- Upstream changes
23.05.2017
- Initial release

Features List
Features lists
- Call recording (US only, may not work on all carriers. Will ONLY work with default AOSP dialer)
- Full OMS/Substratum support (for theming)
- Magisk support
- Working Night Light/Night Mode
- Disabled forced encryption
- LCD Density switched to 560
- Enabled Google Assistant
- Enabled Sustained Performance Mode
- Disabled zsl mode for camera
- Snap camera is the main camera
- Some updates from marlin
- Some updates from stock
- All the same great features as other AOSiP builds
- All things on my repo's
Kernel side
- LA.UM.5.5.r1-05700-8x96.0 merged
- 3.18-66 merged
- LineageOS patches merged
- Enabled WQ power saving mode
- Disabled crc checks
- Crypto hw crc32 support
- New PM kernel driver for Android w/o early_suspend v1.5
- KCAL
- Fastcharge
- Quick wakeup feature
- Sweep2Sleep
- Added SIO,FIOPS and BFQ scheduler
- I/O sched switcher
- Enabled SHA256_ARM64 and SHA512_ARM64 optimizations
- Frandom
- Advanced TCP options enabled
- many more
- many bugfixes
(- Google camera works great
- Builtin up-to-date LOS Snap camera works great, e.g. photo & video )

Excited to give this a go!

Awesome news!! Any way to disable hardware buttons?
On the last build i didn't see a way. Maybe possiblity for the future? Thanks

razrlover said:
Awesome news!! Any way to disable hardware buttons?
On the last build i didn't see a way. Maybe possiblity for the future? Thanks
Click to expand...
Click to collapse
I will bring back that overlay settings for this which i removed
New build will get this option, thank you for your feedback.
https://github.com/Fagyi/android_device_htc_pme/commit/e6bf9507d05900ffe71582b2a281d0877a04cf67

fagyi said:
I will bring back that overlay settings for this which i removed
New build will get this option, thank you for your feedback.
https://github.com/Fagyi/android_device_htc_pme/commit/e6bf9507d05900ffe71582b2a281d0877a04cf67
Click to expand...
Click to collapse
Appreciate the time and building!!

@fagyi Hey dude, great ROM! One question, can you look into importing contacts from SIM Card? It shows as there is nothing on my SIM (yet Im certainly that my contacts are there). Thx in advance

Wow...another stable rom available...thanks:good:

Been flashing this one off AFH and really like it. Must try the new build as camera video was broken last time.

Thanks...

Quick question. Does this ROMs dialer have the visual voicemail like some of the other los/AOSP ones do?

@razorloves
Other solution that you can disable via kernel manager under gesture settings. Look at, you have some good stable features which i likes from nexus device
But updated build is coming at tomorrow. Seems to some repo are updated on aosip

Does this Rom have the native hotspot hack built in for sprint or any carrier?
Sent from my 2PS64 using Tapatalk

moonzbabysh said:
Does this Rom have the native hotspot hack built in for sprint or any carrier?
Click to expand...
Click to collapse
All AOSP ROMs should have native hotspot working. Most stock based ROMs should as well.

Ok Google
Hi!
Someone can test, that OK Google how its working on aosip? My country not supported, but if I change my location than i can enable and teach with my voice 3* times. But after seems to not probably working.
I just ask this, because on this rom I moved to new audio policy xml configuration which I setuped. If not working on this weekend I have free time, maybe found a solution. One logs are welcome from OK Google procedure where officially supported.
( If i know right, its broken all custom roms for now on pme )

Does have this ROM app gestures (or side bar) ?

fagyi said:
I will bring back that overlay settings for this which i removed
New build will get this option, thank you for your feedback.
https://github.com/Fagyi/android_device_htc_pme/commit/e6bf9507d05900ffe71582b2a281d0877a04cf67
Click to expand...
Click to collapse
Thanks bro, soft keys working and hardware keys disabled!
Everything else running great. Little UI bug. Ticker and network traffic are switched under settings but both seem to be working.
Bluetooth music working great with arise music mod. Appreciate the work!!

moonzbabysh said:
Does this Rom have the native hotspot hack built in for sprint or any carrier?
Sent from my 2PS64 using Tapatalk
Click to expand...
Click to collapse
Same question, same answer as in the other AOSP forums, ALL AOSP OS's have built-in native hotspot support, the options differ per OS and dev but AOSP has built-in hotspot.

GROOVYJOSHCLARK said:
Same question, same answer as in the other AOSP forums, ALL AOSP OS's have built-in native hotspot support, the options differ per OS and dev but AOSP has built-in hotspot.
Click to expand...
Click to collapse
I can confirm [emoji4]

[ROM] [9.0.0] LineageOS 16.0 UNOFFICIAL Builds (pme)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 16.0 is a free, community built, aftermarket firmware distribution of Android 9.0.0 (Pie), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
Take a backup first from your actual system!
Before instaling, make sure you are running the latest Oreo firmware from the latest HTC Sense.
If you are encrypted but running an AOSP ROM then you're fine. If you come from Sense, take a full backup of all your data, boot into TWRP and format data (the option which requires you to type "yes") and clean flash accordingly. This is due to encryption changes. Do not skip this step or you will be locked out of your system by a password prompt.
If you are coming from any other ROM wiping /system & /data is strongly recommended
Download the latest build and GApps (both links are below).
Reboot to TWRP.
Flash the latest build and GApps.
Reboot and enjoy (as much as currently possible)
Downloads:
ROM: lineage-16.0-20191015-UNOFFICIAL-pme.zip
GAPPS: OpenGapps
Known Issues:
IMS - VOLTE
SlowMo
SeLinux permissive ( will be fixed when the bugs are fixed )
Reporting bugs:
Grab a logcat right after the problem has occurred (please include at least a few pages of the log, not just the last few lines, unless you know what you're doing).
If it is a random reboot, grab /proc/last_kmsg (do not bother getting a logcat unless you can get it just before the reboot, a logcat after a reboot is useless).
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved.
Credits:
LineageOS Team & Contributors
Code Aurora Forum
@crpalmer ( He left from the project )
Special thank you who send me donations: ( both AOSiP & LOS )
- @The Fer-Shiz-Nizzle
- @fantamadnesss
- @_Sherrif
- @Roocher
- @scutworker
- @synaesthesics
- @MrN1484
- @Galdrapiu
- @Chucktr
- @guest
- @kdrkdr
- @heyChristo
Source code:
LineageOS Gerrit Review
Kernel source
Device source
Vendor source
XDA:DevDB Information
[ROM] [9.0.0] LineageOS 16.0 UNOFFICIAL Builds (pme), ROM for the HTC 10
Contributors
fagyi
ROM OS Version: 9.x Pie
ROM Firmware Required: OREO
Based On: LineageOS
Version Information
Status: Testing
Created 2018-10-08
Last Updated 2019-10-28

CHANGELOGS
Code:
[SIZE="5"][CENTER][B]2018.11.18.[/B] [/CENTER][/SIZE]
All LOS changes are merged
[CENTER][B]Device:[/B][/CENTER]
-pme: overlay: allow home button for wake up the device
-pme: Start loc_launcher as gps user
-pme: ueventd.qcom.rc: set permissions of /dev/qce device
-pme: Enable Always-On-Display again
-pme: nfc: cleanup
-pme: wifi direct cleanup
-pme: init: improve cpuset
-pme: include common selinux
-pme: Update GPS HAL to P
-pme: Kang GPS blobs from B2N_sprout
[CENTER][B]Kernel:[/B][/CENTER]
-patch-3.18.124-125
-pme: Allow LED pulses to be configured
-ANDROID: sdcardfs: Add option to drop unused dentries
-pme: Disable Sweep2Sleep feature by default
-Makefile: Silence x.509 warning
[CENTER][B]Vendor:[/B][/CENTER]
-pme: Kang GPS blobs from B2N_sprout
-pme: Kang CNE/DPM/TIME-SERVICE blobs from B2N_sprout
[SIZE="5"][CENTER][B]2018.11.04.[/B] [/CENTER][/SIZE]
All LOS changes are merged
[CENTER][B]Device:[/B][/CENTER]
- Wifi issue fixed ( warming, high cpu, battery drain )
- AOD and wifi display disabled for now
- Added keydisabler feature ( related for navbar, so you can found/enable navbar option under buttons menu )
- pme: Enable swipe navigation gestures
- pme: remove nexus.xml
- pme: Enable ipacm service
- pme: remove and cleanup unused prebuilt
- pme: Update power profile for P
- pme: add [email protected]
- pme: add restricted cpuset
- pme: Copy NFC firmware to /vendor/lib
- pme: overlay & configs update
- pme: Update IPACM for P release
- pme: audio: update configs from stock O
- pme: Re-enable core control
- pme: Set partitions for loop device.
[CENTER][B]Kernel:[/B][/CENTER]
- fast charge feature over usb
- few optimizations
- cpufreq driver backported from marlin for EAS
- updated energy model for EAS
[SIZE="5"][CENTER][B]2018.10.28.[/B] [/CENTER][/SIZE]
All LOS changes are merged
[CENTER][B]Device:[/B][/CENTER]
pme: Woofer working builtin like as stock
pme: Sync Light interfaces with P
pme: remove powerhint
pme: audio: add support for aptX & aptXHD
pme: update widevine blobs from marlin - 9.0.0 (PPR2.181005.003, Oct 2018)
pme: update graphics blobs from LA.UM.7.6.2.r1-03000-89xx.0
pme: rootdir: add init.foreground.sh
pme: configs: wifi: kang from marlin master brach
pme: config: thermal: remove merge derp from marlin
pme: irqbalance: bring back
pme: power: switch to cfq as default
Revert "pme: Migrate to audio V4"
pme: disable INTERACTION_BOOST,it is just ramping the CPU unnecesarily
pme: manifest: bring back thermal 1.0
pme: thermal: remove the service source too
pme: remove thermal service's for now
pme: power: switch to the latest qcom-1.1 power hal
pme: copy a missing ant+ permission
pme: power: configure for EAS
pme: configs: thermal: update config from marlin to P
pme: remove energy-awareness
pme: enable AOD overlay
Revert "pme: sensors: move to hwbinder"
pme: use new hwcomposer properties
pme: wifi service cleanup
pme: move wifi calibration to vendor
pme: Disable sdm rotator downscaler
pme: lights: add more backlight permissions on init
pme: Renamed config_dozeAfterScreenOff
pme: kang marlin brightness settings
pme: FP: move a new way
pme: audio: add two flags
pme: audio: build libaudioroute
pme: gps: remove unneeded flags
[CENTER][B]Vendor:[/B][/CENTER]
pme: perf: update related blobs from marlin to P
pme: remove energy-awareness
pme: thermal: update related blobs from marlin to P
pme: add missing ant and camera blobs
pme: irqbalance: update related blob from marlin to P
pme: update graphics blobs from LA.UM.7.6.2.r1-03000-89xx.0
pme: update widevine blobs from marlin - 9.0.0 (PPR2.181005.003, Oct 2018)
pme: widevine: remove derp
pme: widevine: remove old blob
pme: audio: add support for aptX & aptXHD
pme: aptX & aptXHD add missing blobs
[SIZE="5"][CENTER][B]2018.10.21.[/B] [/CENTER][/SIZE]
All LOS changes are merged
[CENTER][B]Kernel:[/B][/CENTER]
-Kernel bumped to 124 version from caf
[CENTER][B]Device:[/B][/CENTER]
-Camera/flashlight fixes
-Sensors/rotation mode fixes, credit goes to ngc4622
-FP fixes ( reboot issue )
-Apps issue fixes ( like youtube etc )
[SIZE="5"][CENTER][B]2018.10.14.[/B] [/CENTER][/SIZE]
All LOS changes are merged
[CENTER][B]Device:[/B][/CENTER]
- Dt2w fixed
- Basic audio fixed - call, Jack, BT etc expect woofer
- Some error fixes
- Oktober security updates
[CENTER][B]2018.10.08.[/B] - Initial testing release[/CENTER]

Rule: NEVER ask for ETA
Q: Please add xyz features or fix UI/UX related bugs/regressions
A: All feature requests and UI/UX related stuff should go to LineageOS JIRA: https://jira.lineageos.org, I only take care of hardware-specific stuff.
Q: DT2W ( double tap to wake ) doesnt work for me, what can I do?
A: Please go to settings/display option and re-enable the double tap to wake feature.

Wow very first pie ROM.Will try tonight after work.
Is wireguard module supported like music kernel?
Btw Thanks a lot for your hard work!!!
Edit:Wireguard works fine.

Congrats on the release mate and thanks

WOW??
Going to flash tonight..

Great job ?

awesome, will test today and report back!!

has any1 else encountered frequent sudden reboots?
btw Bluetooth audio seems not to be working

Camera doesnt work, not sure how to get it working as in advance reboot menu there is no soft reboot
another problem is that the fingerprint which are set up get removed when i reboot

Wifi does not connect . And the font is not suitable for me and it can not be changed and the SIM card does not work.

VortexTNT said:
Camera doesnt work, not sure how to get it working as in advance reboot menu there is no soft reboot
another problem is that the fingerprint which are set up get removed when i reboot
Click to expand...
Click to collapse
camera is in the "known bugs"

Headphone jack isnt working. I flashed Stock Gapps. Would that be the reason?
Edit: tried with micro and pico gapps just to check. same problem

imonirban said:
Headphone jack isnt working. I flashed Stock Gapps. Would that be the reason?
Click to expand...
Click to collapse
I dont know yet. At night flashing the last build for few test.
I managed some cleanup over camera, sensor, init etc and need to be testing.
Also at night merged that okt. security updates to los16.
Just building.
Also i want test the audio issues like jack, bt audio.
Wifi & sim working here.

Reboot when turning in Landscape mode

dstyled said:
Reboot when turning in Landscape mode
Click to expand...
Click to collapse
yeah it's really so. thats why it always reboots when i try to play some game, thats in landscape

RIL works (Sprint), Wi-Fi works, TXT/MMS works (and well), pretty decent with stability, I had a few FC's during setup and a reboot here and there but overall works great considering the age of the ROM, I am definitely impressed! Let me know if you need anything else with testing, or help.

Flashlight not work with built in app.

Fantastic stuff. Thanks so much for continuing with this. You are the last man standing when it comes to the HTC 10.
Cheers

^^^
I whole heartily agree to above comment! Without fagyi developing for us, we would be screwed so I urge everyone to encourage him and keep the annoying ETA or repetitive comments minimal. We only want to encourage him not discourage him.

[KERNEL][CLANG] MiPa Kernel [dipper][10.02.2021]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introducton
Code:
/*
* Your Warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
In this kernel, I strive for balance battery / performance, as well as it contains the latest patches for Linux and CAF.
Kernel i make for AOSP Q with Q blobs. How each version on MIUI Q works, i don't know and me it not interesting (if you want use this kernel, you always can flash and test, pls don't report what something don't work on MIUI).
Features:
Base on last sdm845 Q CAF tag
Merge Google Common 4.9-q
Upstream last linux version
Compiled with Proton Clang and Full LTO, LLD links, Shadow Call Stack (SCS) and RELR enabled.
Enable support for NTFS r/w, sdFAT filesystem, F2FS and Implement rapid GC
Kcal Advances Color Control
Enable TTL target
Sound Control by flar2
Add Wireguard Driver
Enable support Sony Dualshock PS3/PS4 and Xbox Controller
Disable unused drivers
Scheduler/schedutile improved (WALT)
SchedTune Assist and CPUSet Assist
Enable select TCP algorithm, westwood by default
Network Signal Guru app compatible.
Simple LMK
Optimize for Android Q
Many tweaks/optimize for battery/performance
AnyKernel3 flashable zip by osm0sis
Installation:
Flash in TWRP recovery, then re-flash Magisk.
If another custom kernel (or my old version, up to 4.2 inclusive) is already installed, then you need to flash stock boot.img first, then magisk and my kernel.
Tuning apps:
FK Kernel Manager
EX Kernel Manager
Downloads:
SourceForge (new build 9.5+)
AndroidFileHost (old build)
My Telegram Group:
https://t.me/joinchat/DNw0ZFHSLa3ObU3noUhSwQ
If you like my work, you can buy me Сoffee

Credits:
Bruno Martins (bgcngm)
Nathan Chancellor (nathanchance)
Francisco Franco (franciscofranco)
Danny Lin (kdrag0n)
Park Ju Hyung (arter97)
All of developers contributions which i picked from.
XDA:DevDB Information
MiPa Kernel, Kernel for the Xiaomi Mi 8
Contributors
palaych
Source Code: https://github.com/palaych/mipa_kernel_xiaomi_sdm845
Version Information
Status: Stable

Changelog
V5.3:
Merge Linux version 4.9.171
Merge CAF tag 'LA.UM.7.3.r1-07400-sdm845.0'
Merge some CAF / Google patches
Merge some LineageOS repo commits
techpack: audio: checkout dipper-p-oos
Update code drivers by sultanxda
Add KLAPSE
Many other improves/fix
V5.2:
Removed a lot of useless and harmful patches
Crypto upstream bump
dipper: fix gps
Update cpu boost driver by sultanxda
Some other fix/changes
V5.1:
Merge Linux version 4.9.166
Merge many CAF patch
Upstream Google Common 4.9
Compile with Clang 9.0.2
Fix deepsleep with 898000.qcom,qup_uart wakelock
Add API to mark IRQs and kthreads as performance critical
V5.0:
Full re-write kernel tree, cleaner tree, removed many patch (useless and unnecessary), many other changes (patch's)
Merge Linux version 4.9.164
Compile with Clang 9.0.1
Updated Boost Drivers by sultanxda
V4.9:
Fix last merge caf/als
Updated fs/f2fs (support F2FS_FS_VERITY)
Compile with Clang 8.0.9
V4.8:
Upstream Linux version 4.9.161
Merge CAF tag 'LA.UM.7.3.r1-06900-sdm845.0'
V4.7:
Upstream Linux version 4.9.160
Update and clean cpu_input_boost / devfreq_boost drivers
Revert some tweaks
Some optimize in defconfig
Other tweaks/fix/etc..too lazy to write.
V4.6:
Upstream Linux version 4.9.155
Merge some last LOS commits
Revert: 'Dynamic SchedTune Boost v3'
Update cpu_input_boost driver
Some merge fix in wlan driver
Update camera drivers (cleaned patch)
Other tweaks/fix/etc..too lazy to write
V4.5:
Upstream Linux version 4.9.154
Merge last LOS commits
Add some tweaks/fix/etc..too lazy to write.
V4.4:
Merge tag 'LA.UM.7.3.r1-06700-sdm845.0'
Upstream Linux version 4.9.152
Tweaks tcp_westwood
Add Dynamic SchedTune Boost v3
merge some last los commits
revert gpu 180mhz
revert some sched tweaks
other changes/tweaks
V4.3:
Upstream Linux Version 4.9.151
Compile with Clang 8.0.7 and GNU GCC 8.2.1, add optimize for sdm845
GPU UC 180Mhz (test)
Enable LZ4 compression
Some update dts to dipper-p-oos
Fix Kcal
DTS: Adjust Energy Model to be inline with Pixel 3 (test)
Tweak's sched
Other changes
Updated drivers camera (maybe full fix portret mode in miui camera)
Full re-write boot scripts
V4.2:
fix freeze (don`t work) potrait mode in miui camera
some change/tweaks
disabled some debug in defconfig
block kernel wakelock 898000.qcom,qup_uart by default
add sound control by flar2
V4.1:
Update Linux version 4.9.148
drivers camera: checkout dipper-p-oos (fix OIS)
Enable support xbox controller
Some changes in anykernel2 script
V4.0:
Rebase on pie source (based on Bruno Martins commits)
Merge CAF tag 'LA.UM.7.3.r1-06600-sdm845.o'
Upstream Linux version 4.9.147
Compiled with Clang 8.0.6
Optimize defconfig
Add Boeffla Wakelock Blocker
Enable support for NTFS r/w
Enable support for sdFAT filesystem
Backlight Minimum Brightness Control
Kcal Advances Color Control
Enable ttl target
Vibration Control
Add Maple I/O Scheduler
Add Wireguard Driver
Enable support Sony Dualshock PS3/PS4
Boost Drivers by sultanxda
Fix Source Code
Some tweaks for battery/performance
Work only on Android Pie
V3.6:
upstream linux version 4.9.140
removed boost drivers by sultanxda and some others tweaks
enable support sony controller (usb)
compile with Linaro 7.3.1
V3.5:
compiled with GNU GCC 8.2
merge commits binder
merge commits sdcardfs
merge linux version 4.9.137
merged tag "LA.UM.6.3.r4-05800-sdm845.0"
boost drivers by sultanxda
merge los commits fs: sdfat
V3.4.2:
compiled with GNU GCC 8.2.1
add cortex-a75/a55 flags
some fix source code
merge latest los commits
V.3.3.1:
update camera driver (fix ir camera, miui face unlock now work)
V.3.3:
add i/o schedulers maple (by default)
Kcal Advances Color Control (experimental features)
Vibration Control (experimental features)
Backlight Minimum Brightness Control (experimental features)
schedutil tweaks
fix brightness led notification (polaris)
maybe something else...

Reserved

Welcome ! Great work

Thank you so much. Welcome aboard. Will try as soon as the bootloader unlock waiting time ends.

Great news!!! Thank you so much.
Can't wait to IR Camera on MIUI working to be a tester. That's really useful to me

chediak said:
Can't wait to IR Camera on MIUI working to be a tester. That's really useful to me
Click to expand...
Click to collapse
I see on github driver ir sensor, on next version add, maybe will work

thanks bro

Waiting for the bootloader unlock also.
excited that we are getting more devs interested in developing for the Mi8

im also waiting for bootloader unlock
can u add wireguard support also
thanks

saikoz said:
can u add wireguard support also
Click to expand...
Click to collapse
already add in next version, forgot to turn on immediately

MiPa Kernel update:V3.3:
add i/o schedulers maple (by default)
Kcal Advances Color Control (experimental features)
Vibration Control (experimental features)
Backlight Minimum Brightness Control (experimental features)
schedutil tweaks
maybe something else...
Downloads:
https://yadi.sk/d/z4ukZOA16UzE_A
https://androidfilehost.com/?fid=11410932744536988805
P.s. in next versions will update camera drivers based on stock source dipper and then ir camera will have to work fully
Me for coffee and buns for more productive work:
http://paypal.me/palaych

palaych said:
MiPa Kernel update:V3.3:
maybe something else...
Click to expand...
Click to collapse
lol. U didn`t know changes in own develop?

peppercute said:
lol. U didn`t know changes in own develop?
Click to expand...
Click to collapse
Well when you develop kernel you can easily forgot what you added etc
Or it's maybe a hidden surprise feature ?
Also you can check on GitHub what he changed ?

Is it possible to set charging speed with this kernel? I'd like to lock it at 1000mA, since I mainly charge with my powerbank and slower charge is better for battery

3lambda said:
Well when you develop kernel you can easily forgot what you added etc
Click to expand...
Click to collapse
yes, there are a couple of files in which I don’t remember what I was doing
and i not commits this files

MiPa Kernel v.3.3.1:
update camera driver (fix ir camera, miui face unlock now work)
Dowload:
https://yadi.sk/d/K5fTOFPng5_FSA
Me for coffee and buns for more productive work:
http://paypal.me/palaych

Any chance for ursa support ?

MiPa Kernel v.3.4.2:
compiled with GNU GCC 8.2.1
add cortex-a75/a55 flags
some fix source code
merge latest los commits
Dowload:
https://yadi.sk/d/h2K6fYo4k0CkKA
https://www.androidfilehost.com/?fid=11410932744536995923
Me for coffee and buns for more productive work:
http://paypal.me/palaych

Kernel Adiuto
Kernel Adiutor non save on reboot

[ROM][EOL][9.0][ARM64][OFFICIAL] ArrowOS 9.x

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ArrowOS
ABOUT
ArrowOS is an AOSP based project started with the aim of keeping things simple, clean and neat. We added just the right and mostly used stuff that will be actually USEFUL at the end of the day.
Website: [url]https://arrowos.net[/URL]
Telegram: Channel | Group | Athene group
Github: [url]https://github.com/ArrowOS[/URL]
Code Review: review.arrowos.net
E-mail: arrowos.contact
WHAT WORKS?
Audio
Camera
RIL
Bluetooth
WiFi
Tethering [Hotspot]
Hardware Keys
Data
GPS
Sensors
VoLTE
Encryption (legacy hardware)
ISSUES
None
Be sure to include a log if you find out a issue: check how to
INSTRUCTIONS
Clean flash
READ NOTES
Download the ROM & GApps
Wipe: System, Data, Dalvik, Cache
Flash ROM + GApps
Reboot & enjoy
Dirty flash
Download the ROM
Wipe: Dalvik and Cache
Flash ROM (+Magisk if rooted previously or if want root)
Reboot & enjoy
NOTES
1. - BACKUP YOUR EFS BEFORE BOOTING PIE! Some people got IMEI=0 after flashing the stock firmware (TWRP with EFS)
DOWNLOADS
ROM: Click here for ROM
Gapps: Click here for GApps
Note: Pico, Nano or Micro Gapps are recommended. We don't like STOCK/HEAVY GApps
ArrowOS source code
Device sources:
device | kernel | vendor
Special thanks to
AOSP
LineageOS
Ezio Lacandia Bijelkic
Maxwen
Alex Cruz
scoute-dich
Tibor Kaputa
Bauuuuu
loonycrd
And all other Open Source, developers, teams and organisations.
DM if we missed someone - you can always look at GitHub to find more contributors! :highfive:
XDA:DevDB Information
ArrowOS 9.x, ROM for the Moto G4 Plus
Contributors
Lyuu, Bauuuuu
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2019-06-13
Created 2018-10-29
Last Updated 2019-06-25

Device changelog
Code:
25-6-2019: Release
* Switched to 3.18 cam drivers
* Merged OPJ28.111-22 cam changes, blobs
* Switch to Snap
* Switch to HAL1 instead of HAL3
* Update some moto frameworks
* Reduce readahead to 128KiB on post-boot
23-6-2019: Bi-weekly release
* Switched to lk.r13 kernel rebase (*called now as reborn)
13-6-2019: Bi-weekly release
* Reworked kernel
* Automatic brightness while dozing
* Brightness values from potter
* Restart camera services after decrypting
* Xiaomi perf
* Removed camera app from pinning
10-4-2019: Bi-weekly release
* Fixed encryption, fm
* Imported Pixelmaster camera
* Imported perf stack from daisy and adapted for 8952
* PowerHAL 1.1
* Updated Sprint packages from OPJ28.111-22
* Rebased kernel, only kept needed things
* Removed obsolete hwui props
15-2-2019: Bi-weekly release
- Fixed statusbar padding
- Moved wcnss_service into vendor and stop copying his config into data
- Removed FRP prop
- Removed deprecated Snap config
- Give light sensor some time to warm up
- Fixed some derps
02-2-2019: Bi-weekly release
- Kernel patches
- Added DTS:Eagle driver
- Updated media codecs and profiles from OPJ28.111-12
- Updated GPS config from OPJ28.111-12
- Updated GPS blobs from deen
- Imported data-ipa-cfg-mgr from CAF
- Imported GPS from LA.UM.7.6.r1-02000-89xx.0
- Removed unused config
13-2-2019: Bi-weekly release
- Fixed kernelpanics
- Fixed audio derps
- Fixed HW encryption
- Re-added soundtrigger 2.0 (required by moto **** hals)
- Switched to Perf stack from OPJ28.111-12
- Switched to ACDB/ADSP from OPJ28.111-12
- Enabled Verizon visual voicemail support, sustained performance mode
- Disable home key if wakeup or sleep is enabled (FP actions)
- Allow kernel to use 19.2MHz GPU idle freq
28-1-2019: Bi-weekly release
- Enabled doze/gestures to overlay
- Imported CarrierConfig from potter (phones which couldn't switch to 3-4G can now)
- Moved MotoActions to Settings dashboard
- Moved ppd service to hal class
- Pinned camera, home apps
- Removed deprecated building flags
- Removed deprecated libjni_livedisplay
- Removed deprecated overlay
- Removed incompatible irqbal config
- Removed thermal client header, HAL
- Reverted soak WCNSS config
- Set minimum 2 big cores
- Ship Health 2.0 HAL
- Some cleanup
- Switched to libperfmgr
- Switched to prebuilt qti-telephony-common from daisy
- Updated brightness overlays with OP5T ones
- Updated build fp from latest soak
- Updated some core values from soak
- Disabled framepointer
- Improved a lot the performance
- Kanged wakelock default list from lk
- Removed Adreno Idler
- Reverted throttling temps to default ones
- Switched to wlan-driver.lnx.1.0.r30-rel driver
- Updated sdfat driver to 2.1.8
- Added missing DTV permissions
- Cleaned up a bit vendor
- Kang ims.apk+qti-telephony-common.jar from daisy
- Removed ESEPowerManager (we don't have the fw for it)
- Updated CNE, QMI, RIL, PM, IMS blobs to P
- Updated Perf stack from daisy (and adapted for our device)
13-1-2019: Bi-weekly release
- Big vendor cleanup
- Imported 64bit thermal-engine, ACBD/ADSP, EsePowerManager blobs
- Imported Widevine DRM 1.0
- Imported thermal HAL
- Ship Google ClearKey DRM 1.1
- Updated core_ctl to reflect changes
- Boot and system dex-preopt
- Fixed fp-as-lock
- Applied kernel patches for CVE-2018-16658,
CVE-2018-10940, CVE-2018-1000004, CVE-2017-1000410, CVE-2017-0861, CVE-2017-12153,
CVE-2017-1000365, CVE-2017-7482, CVE-2017-7472, CVE-2017-6951
- Removed WifiDisplay config
- Removed unused shims
- Removed some sensor HALs from building
- Removed deprecated HWUI config from init
- Removed unused services
- Removed soundtrigger HAL
9-12-2018: Weekly release
- Binderize lights HAL
- Binderized vendor HALs
- Remove libspeakerbundle ****
- Perf derps
- Build fp, desc to latest nougat
- Add burn-in workaround into MotoSettings
- Add fp lock into MotoActions
- A lot of kernel patches
1-12-2018: Weekly release
- Allow CPU overclock to 1.6GHz
- Allow GPU overclock to 600MHz
- Allow 9v charging force back again
- SDCardFS patches
- Drop SafailNet
- Drop libspeakerbundle
- Import QTI QTEE Connector blobs from OPJ28.128
- Import QTI IOP blobs from OPJ28.128
- Import QTI Perf blobs from OPJ28.128
- Import charge_only_mode blob from OPJ28.128
- Import Audio blobs from OPJ28.128
- Import Motorola Audio Service 2.0 blobs from OPJ28.128
- Import Motorola Display Panel blobs from OPJ28.128
- Import Fingerprint blobs from OPJ28.128
- Import Motorola Power blobs from OPJ28.128
- Import esepowermanagemer blob from OPJ28.128
- Import Motorola TV blobs from evert
- Import venus fw from OPJ28.128
- Import msm_irqbalance from OPJ28.128
25-11-2018: Weekly release
- Fixed BT calling
- Fixed FM Radio
18-11-2018: Weekly release
- Fixed hotspot
- Hotspot can use 5GHz now
- Fixed audio policy
- Removed MotoCamera
- Added MotoSettings (TurboCharging on/off)
- internal: qti-telephony-common built from src
- internal: msm_irqbalance service added
- internal: fixed vdex shared names
- internal: updated power_profile to P
- internal: enabled battery LED (can be disabled from Settings now)
- internal: 'SafailNet' added
- internal: enabled QCRIL radio power saving
- internal: overlay: configure number of physical SIM slots
- internal: kernel: SMBCharger Control driver added
- internal: kernel: a lot of patches
02-11-2018: Spooktober release
- Imported marlin brightness values
- MotoCamera is included from now on
- internal: gps: Missing config is now being shipped
- internal: gps: Updated GPS config to P
- internal: gps: GPS updated to LA.BR.1.3.7_rb1.11
- internal: overlay: Battery LED enabled on overlay (you can disable the LED while charging on Settings now)
- internal: overlay: Updated power_profile to P
- internal: kernel: EXFAT FS driver added
- internal: kernel: Sound Control added
- internal: kernel: Fingerprint as homebutton (plus configurable) added
- internal: kernel: Boeffla Wakelock blocker driver added
- internal: kernel: Some lower frequencies added
- internal: kernel: CVE-2017-1000251 patch (critical bluetooth patch)
- internal: kernel: msm8952 arm64 optimizations
- internal: kernel: reduced from 2500 to 1500 mAh for turbo charging
- internal: kernel: WiFi pronto driver updated to LA.BR.1.3.7_rb1.11
- internal: kernel: kCAL Colour Control v2.0 driver added
29-10-2018: Initial release
- Initial release

ds

google camera works in this rom ?

Thanks for the pie world

Very nice rom , smooth and already PIE......very nice job...….

Moto camera not working.
Except that Rom is smooth and works like fluid.

THANK YOU

Rafa0801 said:
THANK YOU
Click to expand...
Click to collapse
There's a button, you know

runs smoothly, magisk is working - same bugs as oreo roms
thanks for Android P

Lyuu said:
Forgot to mention: VOLTE is supposed to work according to some testers.
For camera use MotoCamera.
Next build will contain kernel patches like Kcal (display color management) for those who have burn-in.
Click to expand...
Click to collapse
Awesome kernel will be rebased?

Awesome looks great so far! Nice work devs. Waiting for someone to confirm if volte works. What about the random reboots?

area5101 said:
Awesome looks great so far! Nice work devs. Waiting for someone to confirm if volte works. What about the random reboots?
Click to expand...
Click to collapse
I can confirm VOLTE works and abt random reboots, been using this ROM for like 2hrs and i didnt face any random reboot yet.

Guys, use this MotoCam:
https://drive.google.com/folderview?id=1az2h-gYfeaeUj7GmGw19vaMlsuvovaDQ

Hi, can not you make a 32-bit version for 2GB ram variants?

Deivid_21 said:
Guys, use this MotoCam:
https://drive.google.com/folderview?id=1az2h-gYfeaeUj7GmGw19vaMlsuvovaDQ
Click to expand...
Click to collapse
I am current currently on RR 6.2 Oreo, will this zip work on it? Also I'll try this ROM tonight. Also will the camera performance be same as stock ROMs?

frixed18 said:
Hi, can not you make a 32-bit version for 2GB ram variants?
Click to expand...
Click to collapse
Read the OP. The memleak is fixed. I'm using 2GB version and it works like a charm. Therefore, there is no need ?

area5101 said:
I am current currently on RR 6.2 Oreo, will this zip work on it? Also I'll try this ROM tonight. Also will the camera performance be same as stock ROMs?
Click to expand...
Click to collapse
First backup your efs partition with the twrp mentioned in the op.

frixed18 said:
Hi, can not you make a 32-bit version for 2GB ram variants?
Click to expand...
Click to collapse
No, she can't. Arm is dead.
---------- Post added at 18:33 ---------- Previous post was at 18:32 ----------
kosmasgr said:
Awesome kernel will be rebased?
Click to expand...
Click to collapse
It's already rebased.

CMKdaGreatest said:
There's a button, you know
Click to expand...
Click to collapse
ya i used it too

[ROM] [9.0.0] AOSiP 9.0 - PIE - UNOFFICIAL Builds (pme)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[B][CENTER]**** Disclaimer: I'm not responsible if you destroy your device. Use at your own risk!!! ****[/CENTER][/B]
Android Open Source illusion Project
About us:
AOSIP is a quality custom rom based purely on GOOGLE AOSP source since 6.0 release. Twisted with the latest features and blended with stability. We strive for perfection and it shows.
Team Illusion:
Josh Fox (xlxfoxxlx)
Akhil Narang
Sri Harsha
Instructions:
Take a backup first from your actual system!
Before instaling, make sure you are running the latest Oreo firmware from the latest HTC Sense.
If you are encrypted but running an AOSP ROM then you're fine. If you come from Sense, take a full backup of all your data, boot into TWRP and format data (the option which requires you to type "yes") and clean flash accordingly. This is due to encryption changes. Do not skip this step or you will be locked out of your system by a password prompt.
If you are coming from any other ROM wiping /system & /data is strongly recommended
Download the latest build ( links are below).
Reboot to TWRP.
Flash the latest build.
Reboot and enjoy (as much as currently possible)
Downloads:
ROM: AOSiP-9.0-Pizza-pme-20191029.zip
GAPPS: OpenGApps
Known Issues:
IceView case
IMS - VOLTE
SlowMo??
SeLinux permissive ( will be fixed when the bugs are fixed )
Reporting bugs:
Grab a logcat right after the problem has occurred (please include at least a few pages of the log, not just the last few lines, unless you know what you're doing).
If it is a random reboot, grab /proc/last_kmsg (do not bother getting a logcat unless you can get it just before the reboot, a logcat after a reboot is useless).
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved.
Credits:
AOSiP Team & Contributors
Code Aurora Forum
Special thank you who send me donations: ( both AOSiP & LOS )
- @The Fer-Shiz-Nizzle
- @fantamadnesss
- @_Sherrif
- @Roocher
- @scutworker
- @synaesthesics
- @MrN1484
- @Galdrapiu
- @Chucktr
- @guest
- @kdrkdr
- @heyChristo
Source code:
AOSiP Gerrit Review
Kernel source
Device source
Vendor source
XDA:DevDB Information
AOSiP, ROM for the HTC 10
Contributors
fagyi
ROM OS Version: 9.x Pie
ROM Firmware Required: OREO
Version Information
Status: Testing
Created 2018-11-10
Last Updated 2019-10-29

Changelogs
CHANGELOGS:
2019-01-20
Kernel:
Upstreamed to 132 version of caf
DTS-EAGLE support
Many optimizations
Device:
pme: Graphics updates …
pme: Update tftp_server blobs to P from daisy …
pme: more aosip bringup …
Merge branch 'lineage-16.0' into aosip-pie
pme: thermal: decrease CPU_THROTTLING_THRESHOLD to 60 …
pme: configs: thermal: IceMan V2 …
pme: update thermal config IceMan-V1 …
pme: thermal cleanup's
pme: ueventd: Don't modify permissions of /dev/hw_random …
pme: Build shim to add missing Fence destructor …
pme: remove wifi ac overlays …
pme: configs update from LA.UM.7.5.r1-04000-8x96.0 …
pme: Fix thermal-engine dac_override denial. …
pme: rootdir: comment out the msm8996 power setup from init.qcom.post… …
pme: rootdir: sensors rename to sensors.qti …
pme: rootdir: sync service's with caf LA.UM.7.5.r1-04000-8x96.0 …
pme: audio: restore few stock O configs for now …
pme: add stock O thermal config
pme: Move to common data-ipa-cfg-mgr …
pme: rootdir: update from LA.UM.7.5.r1-04000-8x96
pme: audio: update configs and props from LA.UM.7.5.r1-04000-8x96
pme: props: add ro.vendor.use_data_netmgrd=true
pme: snap: Enable support for camera api v2 …
pme: Update overlay from LA.UM.7.5.r1-03100-8x96.0
pme: overlay: modify brightness settings …
pme: Update priv-app permissions whitelist from LA.UM.7.6.r1-03900-89… …
pme: disable AOD …
pme: Select pre-O disk encryption
pme: include device selinux
pme: address selinux denials …
pme: sepolicy: start from scratch …
pme: group off-screen gestures with other gestures …
pme: selinux: remove duplicate definition …
pme: fix vendor prop derp
pme: Remove cpuset sonfiguration for sensors
pme: overlay: update
pme: rootdir: usb: sync with LA.UM.7.5.r1-03100-8x96.0
pme: manifest: alarm: remove duplicate entries
pme: Add power-off alarm support
pme: Whitelist org.codeaurora.ims package …
pme: Kang ims.apk and qti-telephony-common.jar from daisy …
pme: update thermal config to V4 …
Revert "Revert "Revert "TEMP: pme: Disable org.codeaurora.ims""" …
pme: update thermal config …
pme: Add 'vendor.' prefix to a vendor daemon name …
pme: Enable audio perf hints and disable KPI optimization …
pme: Move OPA property to system …
pme: Remove system and vendor image dependency …
pme: disable SuondTrigger
pme: configs: update com.htc.software.market.xml
pme: configs: privapp cleanup
pme: Cleanup fpc …
pme: cleanup wifi display again
pme: Pin HOME application …
pme: Use tether automatic upstream selection …
pme: Enable 64 bit DRM plugins compilation …
pme: Build ClearKey HIDL plugin from source …
pme: cleanup drm service …
pme: init: power cleanup
pme: init: enable adaptive lmk
pme: init: add cpuset for dpm …
pme: Kang CNE/DPM and Time services from B2N_sprout
pme: bump sprint gps config to P as well
pme: Kang GPS blobs from B2N_sprout …
pme: Update GPS HAL to P …
pme: include common selinux
pme: init: improve cpuset …
pme: wifi direct cleanup
pme: nfc: cleanup
pme: Enable Always-On-Display again
pme: ueventd.qcom.rc: set permissions of /dev/qce device …
pme: Start loc_launcher as gps user …
pme: overlay: allow home button for wake up the device
pme: comment out XTRA_SERVER path
pme: set up WiFi direct supplicant configuration
Vendor:
pme: graphich updates …
pme: Update tftp_server blobs to P from daisy …
pme: add missing IMS related blobs …
Revert "Revert "pme: rename sensors.qcom to sensors.qti"" …
Revert "pme: rename sensors.qcom to sensors.qti" …
pme: rename sensors.qcom to sensors.qti
pme: kang CNE, DPM, TIME, Power-off alarm blobs from daisy …
pme: update vulkan blobs from marlin to P
pme: fix alarm …
pme: update pme-vendor.mk for power-off-alarm feature
pme: Add power-off alarm support …
pme: update drm blobs from stock O
pme: add prebuilt audio hal for woofer …
pme: Kang ims.apk and qti-telephony-common.jar from daisy …
pme: Kang CNE/DPM and Time services from B2N_sprout …
pme: Kang GPS blobs from B2N_sprout …
pme: Copy NFC firmware to /vendor/lib

reserved 2

Wow what is going on ?
Thank you for bringing new experiences for us fagyi.

Patiently waiting on you @fagyi!

Woohoooooo

This is awesome... Ive always loved illusion on my other phones. Thank you so much Fagyi, your the best!

I love youuuuuu?
Just when the navbar is ok i will come on this rom that's amazing ? thank you @fagyi you are awesome You are the best dev I've ever seen? thousand times thank you for your great job.

Awesome, DL now and will test tomorrow!!

BT call audio too low on this one also. Was it built using the Stock Oreo BT like LOS16?
Is it possible for next build to have mixer level boosted please?
Would love to use this as my DD as its awesome but I use BT headset always and its too hard to hear anyone.
Thanks.

nav bar not working meaning like no hardware buttons or software nav bar???

Thanks fagy its working good smooth

VortexTNT said:
nav bar not working meaning like no hardware buttons or software nav bar???
Click to expand...
Click to collapse
No software navbar.

Apps failed to restore both of the times that I tried, so had to do it it manually. Apart from that everything seems to be fine.

Great work thank you fagyi

I enabled nav bar using qemu.hw.mainkeys=0 on build.prop and its working fine

delete

Hello ,
what is the difference between this ROM and LOS 16 ??
Regards .

Ahmad-Hamad said:
Hello ,
what is the difference between this ROM and LOS 16 ??
Regards .
Click to expand...
Click to collapse
More features , more customization

@fagyi any specific reason you chose to include gapps rather than relying on gapps?

Develop Bugs

welcome