Hello friends
I would like to understand what happened to my Z00A model: ZE551.
It presented problems and then I rebrick and it worked again ...
however, some android configuration functions and some apps have not started to run ...
I tried installing CLEANSTOCK v4.6 through Guilherme's tutorial on youtube but it started and it did not continue to flash.
I tried other custom roms, BORETS, FOX ROM, DOTN v1.2, XOSP ... Some did not accept, others installed but frozen in the logo screen ...
I tried to go back to the ASUS 6.0.1 MM STOCK ROM, via adb sideload, via ASUS flash Tools it happens the same, in the ASUS logo Intel Inside freezes and does not continue the boot.
Now it only accepts the STOCK ROM OFFICIAL ASUS 5.0 Lolipop. Via adb sideload is working.
Should it be a hardware defect, should not it work with that correct?
Related
i have the zenfone 2 ZE551ML.
I managed to flash cyanangenmod 12.1 successfully, but realised the battery sucks. So, i wanted to try resurrection remix so i went into TWRP and did a wotal wipe. Before that, i did not backuo into my micro sd. Now when i try to on my phone or even go to recovery, it just hangs at the powering on page. Please help !
My phone is stuck in the ASUS on page but cannot turn on. Also, it is only recognised by my computer as android, not zenfone.
Have you tried to get to bootloader?
Sent from my ASUS_Z00AD using Tapatalk
Just download stock firmware from asus support site and flash from pc.
Flash the firmware on top.
How to flash from pc lol
Is there an app or stg
Also , my phone isn't recognized by my computer
I tried reflashing twrp but it just said waiting for connection and the computers only recognized the phone as Android
Hi, got a used zenfone 2 ZE550ml.....problem is when i flashed the superzen rom meant for 551 model. Now the screen backlighting doesnt work at all and would require a flash light or sun ray to be able to see anything. Managed to flash a new rom meant for the 550ml through rom manager but still wont light up. Recovery is a no-no for me as even with any amount of external lighting wont allow me to see any words at all. Any idea what i should do?
Hey dude, try to flash Asus Zenfone 2 ZE550ML Stock ROM; download via Asus website.
yeap...flashed asus stock rom...still no backlightng....:crying:
I would flash the ROM through boot loader, they are available rooted on shakalaca's mega account, just use the thread changing from cn to ww on this forum
Sent from my Nexus 7 using Tapatalk
I did just like you did and flashed superzen on my 550. Although I wasn't that lucky cause afterwards I've got stuck with a black screen even in fastboot and no matter what I did the screen remained black. So to revert back to stock I had to use Asus flash tool and a raw image for ze550ml.
Guys. I am running fulmics 6.1 and Gabriel Kernel on my Lg g3 d851 and my device is not being detected by lg update tool.
I want to go back to stock but i can't flash the kdz.
I have tried even reflashing fulmics 6.0 without any custom kernel.... And even reinstalling pc drivers but nothing works for me....
Even tried flashing other rooms like resurrection remix and bliss pop... But still not able to get my phone detected.....
Even tried reinstalling a fresh copy of windows but the phone is not deducted in download mode...
ANY HELP WILL BE APPRECIATED
Hey guys there is a problem while i am rooting my device. The problem is when i am flashing twrp to root my device it is showing moto g 2015 instead of zoold (my device name by the way), this problem only occurs when i am in twrp recovery this may not seems to be a issues but believe me guys it is very big issue
here comes my main problem with it,
i can successfully root the my device despite of the problem but when i try to flash cm 13 (or) any costume rom something like this error is poping out on my TWRP "this phone is osprey(moto g) your are installing ZOOLD(my device) rom please install required rom "..........please guys help me out, This is happening every time when i am flashing twrp. My pc can show the legit device name as long as the phone is in switch on mode but when i try to flash and enter into twrp recovery my pc is showing MOTO G instead of my device name ZOOLD.
SORRY FOR MY BAD ENGLISH. THANKs
i was rooting my zenfone 2 laser ze550kl device. But unfortunately the data cable got loose and the device got deisconnected from my laptop. Later when i tried to repeat the process the usb driver says the device is not connected . Also my phone is not starting now. It get restarted again and again when ASUS logo shows up.
How should i fix my phone
Please help..my asus ZE550KL can't be root..what i must to do..sory for my bad engglish
Hopefully someone can help me its for X800 china version
I tried to open the phone after 2 years, and tried to update it with official ROM from http://123.59.123.195/cn/download/phone/30
After updating, when I tried to reboot it, it got stuck on this black screen with a small penguin, and then after few seconds, it restarts back with the same black screen and the penguin.
I can still access TWRP recovery if I press the vol up button while it is restarting. I tried installing different custom ROM, but to no avail. I would really appreciate if you can help me fix my phone
EDIT: RESOLVED
It was looping on fastboot mode (the penguin icon)
Tried installing an older version, lollipop based, from Cuoco92 (from here https://androidfilehost.com/?w=files&flid=57901) and it worked again (thanks Cuoco92!)
Upon reading online, it seems the partition may have been corrupted since I'm trying to flash a MM ROM from a lollipop ROM ,without updating the firmware
I found out that I need to update the firmware to 16S, which I downloaded from this thread: https://forum.xda-developers.com/le...ollipop-marshmallow-firmware-x800-cn-t3463736
(thanks hugoprh!)
After that I am able to install any ROM, from MM and up (was able to install Lineage OS 14.1)
lancelotconquista said:
Hopefully someone can help me its for X800 china version
I tried to open the phone after 2 years, and tried to update it with official ROM from http://123.59.123.195/cn/download/phone/30
After updating, when I tried to reboot it, it got stuck on this black screen with a small penguin, and then after few seconds, it restarts back with the same black screen and the penguin.
I can still access TWRP recovery if I press the vol up button while it is restarting. I tried installing different custom ROM, but to no avail. I would really appreciate if you can help me fix my phone
EDIT: RESOLVED
It was looping on fastboot mode (the penguin icon)
Tried installing an older version, lollipop based, from Cuoco92 (from here https://androidfilehost.com/?w=files&flid=57901) and it worked again (thanks Cuoco92!)
Upon reading online, it seems the partition may have been corrupted since I'm trying to flash a MM ROM from a lollipop ROM ,without updating the firmware
I found out that I need to update the firmware to 16S, which I downloaded from this thread: https://forum.xda-developers.com/le...ollipop-marshmallow-firmware-x800-cn-t3463736
(thanks hugoprh!)
After that I am able to install any ROM, from MM and up (was able to install Lineage OS 14.1)
Click to expand...
Click to collapse
sir can you help me with it my Le Max is showing penguin and then black screen i cant able to access twrp please help me