Black screen after flashing Lineage OS GSI img - Honor 7X Questions & Answers

hi today i tried to flash LOS GSI img on my honor 7x through TWRP, it asked for "Select partition to flash" so i flashed as system partition as mentioned in a xda thread the operation was successful, img was flashed LOS logo appeared but after showing booting animation, there is black screen only power button works and navigation button appears nothing else !
i must add that twrp data was encrypted so i flashed through usb otg
plz guys help !

MeChiku said:
hi today i tried to flash LOS GSI img on my honor 7x through TWRP, it asked for "Select partition to flash" so i flashed as system partition as mentioned in a xda thread the operation was successful, img was flashed LOS logo appeared but after showing booting animation, there is black screen only power button works and navigation button appears nothing else !
i must add that twrp data was encrypted so i flashed through usb otg
plz guys help !
Click to expand...
Click to collapse
Supposed to wipe /data and /cache with stock recovery after flashing GSI with fastboot.
Openkirin site says do not flash with twrp. (It may work, but could give trouble, and no support when not following guide.)
That being said. If you boot to fastboot mode and flash stock Oreo recovery, followed by factory reset, should be ok.
Wait, just had something.
You selected to flash to system or to system image?
Some recovery versions show both.

mrmazak said:
Supposed to wipe /data and /cache with stock recovery after flashing GSI with fastboot.
Openkirin site says do not flash with twrp. (It may work, but could give trouble, and no support when not following guide.)
That being said. If you boot to fastboot mode and flash stock Oreo recovery, followed by factory reset, should be ok.
Wait, just had something.
You selected to flash to system or to system image?
Some recovery versions show both.
Click to expand...
Click to collapse
thanks bro the problem is solved

Related

Stuck at Logo after flashing rom [fixed] > solution!

Edit: solution added
problem:
after flashing a rom (in my case OP3lite or FreedomOS) you can't get past the boot logo
you have access to TWRP, so you can restore nandroid or flash flashable stock OxygenOS packages (tutorial here)
solution:
wipe: Dalvik /ART Cache, Cache, Data, System
flash your rom
try to boot (most likely will get stuck at boot logo)
boot into TWRP > Advanced > Fix Contexts, and swipe to Fix Contexts
Reboot
(wait a while, it might take a few minutes till it boots)
___________________________________________
original post:
hi,
I'm running official OxygenOS 3.1.3.
Rooted (systemless) , TWRP installed.
I don't have any problems on my rom, but everytime I flash a rom I get stuck at the boot logo.
I can just force reboot, goto twrp and restore my nandroid backup, and my phone works fine again.
But I can't flash any rom.
tried this:
Dirty flash OP3Lite rom - stuck at boot logo
wipe and install OP3Lite rom - stuck at boot logo
Restored nandroid backup, factory format, wipe and install OP3Lite rom - stuck at boot logo
wipe and install FreedomOS - stuck at boot logo
Restored nandroid backup, factory format, wipe and install FreedomOS - stuck at boot logo
wipe, Format userdata throught fastboot, install FreedomOS - stuck at boot logo
update to OxygenOS 3.2.1 (flashable zip throught twrp)
wipe and install FreedomOS - stuck at boot logo
Both roms I tried are OxygenOS 3.2.1 stock based, my problem is most likely not due to the rom I want to flash.
Anyone knows a solution for this?
is it possible that systemless root causes this problem?
are you encrypted? that might be the issue.
backup your internal sd data then go to fastboot and fastboot format userdata then flash the rom you want
Abaddon said:
are you encrypted? that might be the issue.
backup your internal sd data then go to fastboot and fastboot format userdata then flash the rom you want
Click to expand...
Click to collapse
I never did format my userdata throught fastboot, so I might be encrypted.
I'll try tomorrow and let you know if that was the solution.
@Abaddon I format my userdata throught fastboot (fastboot format userdata), but still roms wont go past the Logo . any other idea?
did you full wipe?
wiped /system too before flashing a rom then u go and flash the rom + gapps if needed
how long was it at the boot logo? no animation correct?
did u advance wipe - data, caches, system instead of factory wipe, try it 3 times
I did a few wipe 3 times, still stuck at logo.
I get stuck on this logo, never reboot, just get stuck there.
I noticed that it does flash the rom, cause if I restore my nanodroid backup layers and adblock is added.
I also get zero error while flashing in twrp.
I fixed it .
did a fill whipe, then flashed feedomOS, then tried to boot, didnt get past the logo, booted into recovery, selected "fix Contexts" and then rebooted, started without any problem .
doesent work for me..!! any help
Same here this issue keeps occuring again and again. then i always have to follow mega unbrick guide
Resurrection ROM 7.1.1 stuck at logo after every restore
nikhilsnigam said:
Same here this issue keeps occuring again and again. then i always have to follow mega unbrick guide
Click to expand...
Click to collapse
Faced this issue every time I restore any nandroid on one plus 3. It stucks at rotating resurrection logot . Even tried fix contents from TWRP, no output. Please help without a functional TWRP backup and restore - phone is useless. Only everytime mega unbrick guide needs to be repeated with painful reinstall of apps
hello guys. sorry if I'm a bit slow on this topic. I'm using the the op3t A3010 version (not dure whether I'm at the right forum or not lol) Recently I updated my phone to the new 4.1.7, in which I had already rooted the phone before with magisk v12. But right after the update, as usual, the phone will unroot and yes I did root the phone back by using the magisk v13.0 version. But it failed the safety net. So after a few 'research', I installed the superuser just in case that the safety net will work this time. But this is when it all went wrong. The phone did restart back to factory settings, but the phone is not rooted (checked by using the rootchecker app) So again, I'm back to the twrp recovery, clean wipe all the data, with hope that I can start from scratch which is from installing the magisk all over again. But after this step, it stuck at the boot logo for like more than half an hour. Than at this moment, I restart my phone back to recovery mode by long pressing the power button, and when I try to install both the magisk 12 and 13 version, there is a line of error code on the screen. There's a site that says simply go to the advance setting on the twrp interface, check fix contents and ur phone will be as good as new. After done doing that, I'm now stuck with a phone with no os installed and about 38% battery left. Can anyone help me here? This is the only phone that I had :crying: Urgent help needed here guys
Unless your original installation is without storage encryption (no dm-verity) this will happen. So next time install custom rom after flashing OB22 firmware+modem, then boot patch for dm-verity followed with custom rom and gapps then boot without wipe
i have the same problem but with p9 lite : when i tried a flash lineageOS or ResurrectionRemix my phone stucks at boot logo and when i flash the original os my phone works perfectly
sorry for my english
washichi said:
I fixed it .
did a fill whipe, then flashed feedomOS, then tried to boot, didnt get past the logo, booted into recovery, selected "fix Contexts" and then rebooted, started without any problem .
Click to expand...
Click to collapse
How long did you wait?
washichi said:
Edit: solution added
boot into TWRP > Advanced > Fix Contexts, and swipe to Fix Contexts
Reboot
(wait a while, it might take a few minutes till it boots)
Click to expand...
Click to collapse
What is the work around for CWM v6.0.5.1 Philz Touch6; it does not have Fix contexts under Advanced Functions
My issue: Tecno Spark K7 stuck at boot logo after flashing with ported ROM from Infinix XOS Chameleon . Both kernels match
This is EXACTLY my issue with the galaxy s9 plus. Gonna try the solution you wrote tommorow.
i have the same problem with galaxy s5 and the solution mentioned in the thread did not work with me.
im having the same issue but in lenovo z5 pro gt
PauloVillaflor said:
im having the same issue but in lenovo z5 pro gt
Click to expand...
Click to collapse
Search for answers HERE and if not successful, create a thread in the Q&A forum there.
You may not get any help here since this is the OP 3 forum.

Normal boot always ends up in TWRP

Hello everyone,
I have a problem regarding the start-up of my phone. Yesterday I unlocked my bootloader and flashed TWRP (twrp-3.1.1-0-addison.img) with the help of the thread located here.
Everything worked fine, I could boot into TWRP afterwards. I continued by wiping the needed partitions and flashing the newest Lineage OS ZIP alongside with the GApps Nano ZIP.
The problem I face now is that when I reboot in TWRP by selecting the “System” option, I end up again in TWRP (same happens if I shut down the phone and make a normal boot).
However, if I boot to the bootloader and select there the normal “start” option, the phone boots up just fine using the installed ROM.
Any ideas what’s wrong here and how I cloud fix that?
This happens with me, i don't know If its gonna work with you but works for me, i just flash a older twrp image from the same thread you use, ( i install from bootloader, not flashing a img in twrp), then you boot on twrp, and then you install the latest recovery
Note: This works for me, i don't know if its work for you
{Sorry for my poor english, my native language is porruguese }
jst98 said:
This happens with me, i don't know If its gonna work with you but works for me, i just flash a older twrp image from the same thread you use, ( i install from bootloader, not flashing a img in twrp), then you boot on twrp, and then you install the latest recovery
Note: This works for me, i don't know if its work for you
{Sorry for my poor english, my native language is porruguese }
Click to expand...
Click to collapse
Thanks a lot, I will give it a try!
and then you install the latest recovery
Click to expand...
Click to collapse
Do you mean TWRP or a recovery image of the OS?
When i say to intall the latest version is for twrp
Unfortunately, it did not work ....
I flashed twrp-3.0.2-0-addison.img via fastboot, booted to TWRP and installed the newest image with the 'install' option from TWRP.
Phone is still booting to the recovery if I restart ....
_Hope_ said:
Unfortunately, it did not work ....
I flashed twrp-3.0.2-0-addison.img via fastboot, booted to TWRP and installed the newest image with the 'install' option from TWRP.
Phone is still booting to the recovery if I restart ....
Click to expand...
Click to collapse
Aww ! It's just a simple thing. Use this simple command "fastboot oem fb_mode_clear" and it will boot to normal system.
I was also facing this in my previous htc device.
That was tha problem of tge twrp version that i was using.
Try using the different twrp.

I cant install any custom rom on my P2

I unlocked the boot loader & installed TWRP
I tried to install official Lienage 7.1.2 after flashing & wipe cache then restarting screen went black with long vibration & blue notification led
the other 8.1 roms the TWRP Stopes when flashing after saying flashing img
may anyone tell me the problem
Arafa1994 said:
I unlocked the boot loader & installed TWRP
I tried to install official Lienage 7.1.2 after flashing & wipe cache then restarting screen went black with long vibration & blue notification led
the other 8.1 roms the TWRP Stopes when flashing after saying flashing img
may anyone tell me the problem
Click to expand...
Click to collapse
Flash twrp via fastboot.
Boot to twrp via
Fastboot boot twrp.img
Replace "twrp" with the file name of your twrp.
Once twrp booted, go into reboot menu. And reboot to recovery again. That will make your phone boot again into twrp, but this time with more rights.
Go into wipe. Advanced wipe
Change data partition file system to ext4.
Reboot again into twrp via the reboot menu ,just like before.
Now go into wipe again, and format system,data,dalvik and cache.
Flash your rom.
Flash gapps (if not otherwise stated by ROM thread)
Flash Magisk (optional, if you want root)
Wipe dalvik and cache.
Reboot. And enjoy
Sent from my Lenovo P2a42 using XDA Labs
sm00th4f3 said:
Flash twrp via fastboot.
Boot to twrp via
Fastboot boot twrp.img
Replace "twrp" with the file name of your twrp.
Once twrp booted, go into reboot menu. And reboot to recovery again. That will make your phone boot again into twrp, but this time with more rights.
Go into wipe. Advanced wipe
Change data partition file system to ext4.
Reboot again into twrp via the reboot menu ,just like before.
Now go into wipe again, and format system,data,dalvik and cache.
Flash your rom.
Flash gapps (if not otherwise stated by ROM thread)
Flash Magisk (optional, if you want root)
Wipe dalvik and cache.
Reboot. And enjoy
Click to expand...
Click to collapse
Thx alot
But I have one more question
Should the bootloader to be marshmallow or nougat?
Arafa1994 said:
Thx alot
But I have one more question
Should the bootloader to be marshmallow or nougat?
Click to expand...
Click to collapse
What do you mean The bootloader is the bootloader.
Danoz88 said:
What do you mean The bootloader is the bootloader.
Click to expand...
Click to collapse
In my moto Z Play some roms needs Nougat bootloader like xperince
So Iam asking If some roms needs nougat bootloader in Lenovo P2
Arafa1994 said:
So Iam asking If some roms needs nougat bootloader in Lenovo P2
Click to expand...
Click to collapse
We only have one bootloader.
We have different firmwares though like nougat and marshmallow.
You will need Firmwares S244 for nougat ROMs.
That firmware must be flashed through ota. Stockrom-feature. Simply using twrp does not count as doing otas.
Basic starter things: Have Firmware S244 or S251 installed through stock ota feature.
Then use my earlier stated instructions.
Thx alot it worked & no problems

crashing and failed to reboot into system, boot loop into recovery

my oneplus 5t already unlocked bootloader, installed TWRP.
yesterday i saw the oneplus 5t open beta 19, so i downloaded it and click setting→system update→local, and click the downloaded update files...
it reboot into twrp and flashing, after flashed, my phone boot loop into twrp only, cannot boot into system. So i click wipe→advanced→ tick dalvik, cache, system and data. next i download the stock rom from official (oos 5.1.7 and open beta 19). after flashing, it also boot loop into twrp... i tried download and install the stock recovery from official, but it black screen when i boot into recovery, so flashed back to the TWRP...
Pls help me to solve the problem pls........... :crying: :crying:
ArlenCheng said:
my oneplus 5t already unlocked bootloader, installed TWRP.
yesterday i saw the oneplus 5t open beta 19, so i downloaded it and click setting→system update→local, and click the downloaded update files...
it reboot into twrp and flashing, after flashed, my phone boot loop into twrp only, cannot boot into system. So i click wipe→advanced→ tick dalvik, cache, system and data. next i download the stock rom from official (oos 5.1.7 and open beta 19). after flashing, it also boot loop into twrp... i tried download and install the stock recovery from official, but it black screen when i boot into recovery, so flashed back to the TWRP...
Pls help me to solve the problem pls........... :crying: :crying:
Click to expand...
Click to collapse
Format Data and then flash the rom. Formatting will wipe even your internal storage so once formatting is done, transfer the files to phone and then flash

[Recovery][TWRP] Mi 8 Lite TWRP-3.2.3 Multilanguage from 4pda

RECOVERY information:
Name Version: Xiaomi Mi 8 Lite Multilanguage TWRP
Download:
DOWNLOAD
MOD EDIT: Link removed, side is containing warez
How to install:
Fastboot just run .bat file to install it from fastboot mode
TWRP.img can be flashed manually from fastboot
all credits goes to @wzsx150, and poison-74 (4pda)
U know if this is compatible with latest Miui EU rom?
Is data decryptable?
Not entire related to Platina but Mi8 SE users are having trouble with twrp and miui eu.
Thanks.
Have downloaded and installed file recovery.img with twrp, works ok with xiaomi.eu rom.
I have MIUI 10 xiaomi.eu 9.1.10 android 9
lucainno said:
Have downloaded and installed file recovery.img with twrp, works ok with xiaomi.eu rom.
I have MIUI 10 xiaomi.eu 9.1.10 android 9
Click to expand...
Click to collapse
Can you enter in twrp and see if data folder is avalable?
Or it ask a password?
Go recovery no enter password, press cancell .
Before wipe Save All data to PC
(this action wipe All data and internal Memory) Wipe data factory reset and reboot phone
install update recovery.img multilanguage
Please help me, how enter to twrp recovery on Mi8 Lite ? I try all buttons combinations and nothing.
Power of phone
Press Vol + and Power for 5 seconds for enter recovery
Hi guys, I just went from Redmi5 Plus to Mi8 lite, unfortunately I have to wait for the famous 360 hours in the meantime I'm downloading what I need on the R5Plus was available Orange Fox recovery, which automatically decrypted the partitions without having to install lazy Flasch later, here how does this TWRP mod do this?
I would like to install the Xiaomi Eu as soon as I unlock the bootloader I am currently on last Global Stable 10.2.2.0 a help thanks.
It's work on android pie beta global 9.3.1?
this should be a new one:
MOD EDIT: Link removed, side is containing warez
This build does not work with Pie - can someone update the initial post?
excuse me sir, ust want to ask, after flashing twrp 1003 version why after reboot always revert to stock recovery, is there any to fix it, thanks
edit : i already fix it
falqon said:
excuse me sir, ust want to ask, after flashing twrp 1003 version why after reboot always revert to stock recovery, is there any to fix it, thanks
edit : i already fix it
Click to expand...
Click to collapse
Could you please share how you fixed it?
Just upgraded the ROM to 10.3.2.0 and now TWRP recovery always reverted to stock recovery after reboot.
reflash your twrp via adb and when u type "fastboot reboot" press and hold Volume Up until enter twrp, and then try to reboot recovery via twrp. i can't share youtube link, afk right now
falqon said:
reflash your twrp via adb and when u type "fastboot reboot" press and hold Volume Up until enter twrp, and then try to reboot recovery via twrp. i can't share youtube link, afk right now
Click to expand...
Click to collapse
Done this several times, but I didn't use hard buttons, instead i used fastboot boot recovery.img command to reboot to recovery after flashing recovery. I also tried rebooting to recovery from twrp without problem, but after rebooted to system, twrp reverted to stock recovery, everytime.
I didn't have this problem with MIUI 10.3.1.0 with the same TWRP.
edit : I'm using TWRP 0330 btw, and somehow there was no swipe to allow modification confirmation when the phone rebooted to twrp for the 1st time after flashing twrp.
Wonder why.
ne0t said:
Done this several times, but I didn't use hard buttons, instead i used fastboot boot recovery.img command to reboot to recovery after flashing recovery. I also tried rebooting to recovery from twrp without problem, but after rebooted to system, twrp reverted to stock recovery, everytime.
I didn't have this problem with MIUI 10.3.1.0 with the same TWRP.
edit : I'm using TWRP 0330 btw, and somehow there was no swipe to allow modification confirmation when the phone rebooted to twrp for the 1st time after flashing twrp.
Wonder why.
Click to expand...
Click to collapse
check your display panel via device hardware info on playstore, mine is synaptic, not all twrp version work on this panel, i'm using twrp 3.2.3-1003 btw
https://www.youtube.com/watch?v=7eeiSm7rzZY
falqon said:
check your display panel via device hardware info on playstore, mine is synaptic, not all twrp version work on this panel, i'm using twrp 3.2.3-1003 btw
https://www.youtube.com/watch?v=7eeiSm7rzZY
Click to expand...
Click to collapse
Tks, but I don't have problem with TWRP 0330, it works fine, including touch screen, the problem is TWRP get replaced by Stock Recovery everytime I boot my my phone to system.
I don't want to root my phone, just like to have TWRP recovery around so I can use it to flash hosts file for ads blocking and some other things.
Someone told me i need to flash lazyflasher...I'm going to do it later ..
ne0t said:
Tks, but I don't have problem with TWRP 0330, it works fine, including touch screen, the problem is TWRP get replaced by Stock Recovery everytime I boot my my phone to system.
I don't want to root my phone, just like to have TWRP recovery around so I can use it to flash hosts file for ads blocking and some other things.
Someone told me i need to flash lazyflasher...I'm going to do it later ..
Click to expand...
Click to collapse
Boot to recovery through fastboot and then flash the image or the zip through TWRP, then to flash it reboot again to TWRP before to boot up to system.
SubwayChamp said:
Boot to recovery through fastboot and then flash the image or the zip through TWRP, then to flash it reboot again to TWRP before to boot up to system.
Click to expand...
Click to collapse
Tried that too, actually more, boot to recovery from fastboot with fastboot boot recovery.img command and also hard button, boot to recovery from twrp recovery, flash recovery.img, boot to twrp recovery again twice, but stock recovery still came back.
ne0t said:
Tried that too, actually more, boot to recovery from fastboot with fastboot boot recovery.img command and also hard button, boot to recovery from twrp recovery, flash recovery.img, boot to twrp recovery again twice, but stock recovery still came back.
Click to expand...
Click to collapse
No. don´t try to boot to recovery from fastboot after to flash it, don´t flash it through fastboot.
Do the next three steps and see what happens but do it exactly the same or won´t worth the try:
- In fastboot delete recovery partition by typing fastboot erase recovery
- Then reboot to recovery (don´t flash it yet) by typing fastboot boot twrp.img (rename recovery image firstly to twrp)
- Now once in TWRP flash the zip or image to the recovery partition, when you finish go to Reboot options within TWRP and choose recovery to boot to it before to boot up to system. If you boot at this instance to TWRP then the issue have to be solved, reboot normally to system.
Edit: If this way the problem is not solved then after to install TWRP flash Magisk that can prevent it to be overwritten.

Categories

Resources