Develop Bugs

[STOCK] H815 20B Images + KDZ + Flashables (system+boot+modem+bootloader)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These are for the H815 variant only. Files are from software version 20B (Android 6.0 Marshmallow).
Included below: TWRP-flashable stock rom, boot, modem and bootloader zips. KDZ and individual images are also included.​
*There is NO anti-rollback qfuse used in this update... you can downgrade using LGUP HERE. You can also use LGUP to flash the 20B KDZ.
Please do not mirror my files!
20B NOTES...
1. Knock code should be back.
2. Not sure what else has changed yet...
Requirements:
You must have TWRP 2.8.7+ installed to use these files. Thanks to Dees_Troy as always for that. And, of course, you must have your bootloader unlocked for TWRP to work. Currently only H815 EU and (some) SEA variants have official unlock through LG's unlock page HERE. Please do not ask if "model x" is supported... did you unlock via LG's official unlock tool? Yes? then you can use it. No? then you can't... and you should just flash the KDZ instead.
If you have a locked bootloader and want to upgrade... just use LGUP and flash the KDZ. Don't risk it with FlashFire.
Install Directions:
These directions should be used by everyone who wants a rooted 20B system. Don't want root? Then it's probably easiest to just flash the stock KDZ... or just skip the supersu zip in the directions below.
1. Download the boot, modem, bootloader and system zips listed under the download section and place them on internal or external sdcard.
2. Also download the latest SuperSu zip from HERE [Thanks to Chainfire for his auto-patching boot.img version!]
3. (re)Boot into TWRP... don't wipe anything.
4. Backup current partitions: boot, system, data, efs
5. Install boot, bootloader, modem, system and supersu zips- ADD SUPERSU LAST! (Install > select zip > press "add more zips" > select next zip > repeat)
6. After all 5 zips finish flashing you can reboot! (if TWRP asks if you want to install SU, NO!!!)
Downloads:
LG-H81520B-Flashable.System.zip
100% stock untouched system. MD5 = 22edce52ca96e20f7a16a67d00934b4d
Mirror here.
LG-H81520B-Flashable.Modem.zip
This is a flashable stock 20B modem.
LG-H81520B-Flashable.Boot.zip
This is a flashable stock 20B boot.img. Boot.img contains kernel + dtb + ramdisk.
LG-H81520B-Flashable.Bootloader.zip
This is a flashable stock 20B bootloader. It contains aboot, factory, hyp, laf, pmic, raw_resources, rpm, sbl1, sdi, sec and tz. Do NOT wipe system before flashing this zip. Zip checks model before flashing.
Also, KDZ + all stock images for 20B are available here.
CODEFIRE DIRECTORY
Downgrade:
See the Downgrade section in my 20A thread HERE...
OR
Use LGUP HERE to flash a previous KDZ version.
Unofficial Bootloader Unlock:
Don't have official bootloader unlock? This guy claims to have a working method HERE...
#TEAMCODEFIRE
Click to expand...
Click to collapse
y u quote OP?

*reserved*
I may use this space to respond to some questions or add more notes as we go... rather than making new posts in the thread that get lost or go unnoticed.
FAQ
Q: My device shows the wrong software version in settings.. how do I fix this?
A: This is related to the "cust" (customer) partition on your phone. Using TWRP or a "Root Explorer" type app you can delete the current files in your Cust partition then you should have the proper version showing. I am not a fan of adding or flashing the cust partition... so I don't include updated cust partitions in the flashables. The cust folder/partition is in the root of your main directory.

Thanks Boss! U the man, as usual...

thanks @autoprime
I suggest you add a "NEW" on the title of the thread! because it seems the old thread! I had not noticed it at the beginning!

Thanks Auto!

Thanks mate!
Sent from my LG G4 using Tapatalk

Hi, anyone try Xposed with this version ?

can this modem be used on 20A based ROMS? - because my LTE reception with 20A is pretty weak, wants to slip back into HSPA mode in fringe areas where other phones have worked well.

.......
Enviado desde mi LG-H815 mediante Tapatalk

Hmm slightly odd in that when i go to setting-software info it says the software version is "7 HD 6.1 by S3VEN-234-15". Haven't used 7 HD for probably a month now and dirty flashed this from V20a. Odd, very odd.

sudman said:
Hmm slightly odd in that when i go to setting-software info it says the software version is "7 HD 6.1 by S3VEN-234-15". Haven't used 7 HD for probably a month now and dirty flashed this from V20a. Odd, very odd.
Click to expand...
Click to collapse
delete cust folder..

S7VEN is everywhere
Sent from my LG-H815 using Tapatalk

First impressions?

Changelog from 20a?

Paolo83 said:
Changelog from 20a?
Click to expand...
Click to collapse
Please Read OP!
20B NOTES...
1. Knock code should be back.
2. Not sure what else has changed yet

I install with this method but that don`t change my software version i still have V10e-260-01, but android version is changed to 6.0.
?

Sweet! The KDZ is there
So for those of us with a locked booloader, no root etc, we can just flash / update to 20B via LGUP and retain all of our nothing fun (root and locked bootloader)?

Flashed fine H815P with LG UP.
Thanks,
VW

can't download the KDZ. tried 3 times, stopped at 67.5% everytime. how can i solve this problem?

victorwalter said:
Flashed fine H815P with LG UP.
Thanks,
VW
Click to expand...
Click to collapse
Can you give a feedback about battery and bugs? Thanks

[ROM][6.0.1][LUX] Stock Debloated VoLTE 2.0.0 [MPD24.107-70-1]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About Stock Debloated VoLTE
Information
Installation
Downloads
This is a fully Stock Debloated ROM (Android 6.0.1) of the MPD24.107-70-1 firmware, with support for VoLTE. This version supports XT1562 and XT1563, single-sim and dual-sim devices.
It is debloated, removing as much intrusive apps and services without losing the features of the Moto Display, Moto Voice and Miracast present in Stock MPD24.107-70-1.
Includes the stock bootlogo with the unlocked bootloader warning disabled.
-INFORMATION-
-Indian Firmware MPD24.107-71-1 (Android 6.0.1 )
-Security Patch Level of October 1, 2016
-Stock bootlogo
-Stock kernel
-Debloated
-Zipaligned
-INSTALLATION INSTRUCTIONS-
- Place ROM in your internal memory
- Wipe data and factory reset
- Wipe cache and dalvik-cache
- Flash ROM using TWRP
- Flash the modem (Only if VoLTE doesn't work)
- Reboot
-INSTALLATION FILES-
ROM
MIRROR [Android File Host]
MODEM MPD24.107-70-1
(DON'T USE RECOVERY, USE FASTBOOT METHOD)
MIRROR [Android File Host]​
Installing The Modem Via Fastboot
Step 1. Once the bootloader is unlocked, enable the USB debugging mode on your phone.
Go to Settings > About phone, and then tap "Build number" 7 times to become a developer.
Now go back to Settings, then choose "Developer options".
Find the "USB debugging" option and use its toggle button to enable it.
Accept warning by tapping on the OK button.
Step 2. Now install the USB drivers on your Windows from here.
Step 3. Extract the modem (ZIP or RAR file), if the file INSTALL.CMD does not exist, rename the INSTALL.TXT to INSTALL.CMD.
Step 4. Connect your phone to the computer, wait for the installation of the drivers and run the file INSTALL.CMD.
Step 5. Phone will automatically reboot in fastboot mode, wait for the procedure is completed. After installing the phone will restart in the system again.
Debloat List
/system/app
/system/app/Drive
/system/app/Translate
/system/app/talkback
/system/app/Hangouts
/system/app/HTMLViewer
/system/app/colorservice
/system/app/Bug2GoStub
/system/app/YouTube
/system/app/com.motorola.android.nativedropboxagent
/system/app/MotorolaConnect_Basic
/system/app/PartnerBookmarksProvider
/system/app/Videos
/system/app/GoogleHindiIME
/system/app/BookmarkProvider
/system/app/KoreanIME
/system/app/ZhuyinIME
/system/app/NoiseField
/system/app/EditorsDocs
/system/app/Maps
/system/app/EditorsSheets
/system/app/LauncherConfig
/system/app/EditorsSlides
/system/app/BasicDreams
/system/app/CloudPrint
/system/app/ColorProfiles
/system/app/GooglePinyinIME
/system/app/UserDictionaryProvider
/system/app/com.motorola.android.settings.modemdebug
/system/app/JapaneseIME
/system/app/Photos
/system/app/PhaseBeam
/system/app/MediaShortcuts
/system/app/Music2
/system/app/HoloSpiralWallpaper
/system/priv-app
/system/priv-app/MotoCareInt
/system/priv-app/DemoMode
/system/priv-app/Moodles
/system/priv-app/GuideMe
/system/priv-app/TagGoogle
/system/priv-app/LMIRescueSecurity
/system/priv-app/BodyGuardApp
/system/priv-app/3c_ota
/system/priv-app/DigitalPersonalization
/system/priv-app/CellBroadcastReceiver
/system/priv-app/PreloadContacts
/system/priv-app/MotoCare
/system/etc
/system/etc/motorola/MotoDemo
ROM Firmware Required: Unlocked Bootloader and Custom Recovery (TWRP 3.0.2-r3 Recommended)
Credits
Thanks to @effingbadluck for providing the TWRP backup for the first version of ROM (the second version is based on the complete firmware file).
Thanks to @SuperR. for SuperR's Kitchen and other instructions in the deodex process.
Thanks to @minimale_ldz for the XDRom and your best work in debloat process.
Thanks to you for always providing feedback.

really thanks for this.finally stock flashable rom.can i flash this without wipe?and then reroot etc..i am on stock rom with May security patch.thanks.

Uploading...

kos25k said:
really thanks for this.finally stock flashable rom.can i flash this without wipe?and then reroot etc..i am on stock rom with May security patch.thanks.
Click to expand...
Click to collapse
Hi! If you have the firmware MPD24.107-70, wipe cache and dalvik-cache only.

ok thanks.and then i imagine i have to reflash xposed.zip and generally the flashable zips i have flashed till now..right?

link wrong

problem here also.maybe till uploading..

spowl said:
link wrong
Click to expand...
Click to collapse
kos25k said:
problem here also.maybe till uploading..
Click to expand...
Click to collapse
Sorry, I went to sleep and gave an error in uploading. I am uploading again.

Upload OK.

THANKS. Your roms are fantastic!

did anyone try installing without f.reset?all ok?

Working my simcard again finally, thanks.
Sorry but what is the best way to root here?
Greetings

i successfully rooted the same stable way.supersu 2.62-3 systemless version after f.reset.and also successfully only wiped cache and dalvic from previous version with May security patches.Thanks again the dev for this rom.It is a must rom to have that was missing maaany time now.

Use version 2.79 of SuperSU edited by me for MXP Stock:
https://www.androidfilehost.com/?fid=529152257862692595
Sent from my XT1562 using XDA-Developers Legacy app

is systemless?

Can I add the sound mods as it was in your previous versions? This is the type of ROM I wanted for myself without root and my Pokemon go also works haha! I will definitely root the phone again but want to make sure if I can add sound mods to this?
Sent from my XT1562 using Tapatalk

Flashed over stock 24.107.70 (really stock, not a debloat) using TWRP r5. Wiped Cache and Dalvik. Re-flashed SuperSU from post #14, a kernel, and the latest Xposed. Everything seems to work, all apps and their state/options were kept.

Bluetooth an wifi not work simultaneously
Bluetooth an wifi not work simultaneously

Magiks Systemless SuperSU and Xposed work flawlessly

VOLTE not working for me. Any suggestions?

[ROM][US998][Stock][OREO] LG-US998 20D ROM

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LG-US998 20D ROM​Hello everyone
Sry for the Late Post. I was in a Hospital for few weeks! But now here is it :fingers-crossed:
This Rom is 100% Stock. TWRP 3.2.1-0 must first be installed as with Nougat Roms. Then you can install this Rom and have Oreo with working TWRP.
This zip is created from the original KDZ. I changed the Boot.img, so you do not have to reinstall TWRP. . .
I had made this for users who can not get ota's because they have Custom Recovery / Root installed
Sorry for my bad english i'm out of practice ​
Features​ *Stock build made from official KDZ
*Stock Build.prop
*Unrooted
*Boot.img modified to keep TWRP
*Remove dm-verity
*Remove forceencrypt​Installation​ What you need​ *Unlocked Bootloader [How to do]
*Working TWRP installed [Link to unofficial TWRP]
*When you need Root, Latest Magisk [Download]
*US99820D(TWRP).zip [Download]​
How to install​ When you are on Nougat: Reboot to recovery using button combo or reboot app (need root)
flash this TWRP.img Download reboot and Backup Dalvik,ART, Cache, System & Data (include not your internal memory) and Boot
in to your external sd or copy the backup from internal sd to your PC!
From Oreo: Install TWRP with this guide but with this img
For clean install: Wipe Dalvik/ART, Cache, System and Data (Recommend)
You can also keep your data by dirty flashing the zip. *Not tested!!!*
Flash US99820D(TWRP).zip
then Magisk zip when you need root
Reboot System
At the first time you boot to system, it can be TWRP says No OS installed. You can ignore it.
If TWRP asks if you want to install SU, hit no​
Here you can find my other [Downloads.] There are IMG´s, KDZ´z and more!​
Rom Version
Android Version: 8.0
Android security patch level: 2018-07-01
Build date: 2018-07-10
MD5 SUMS:
Code:
[SIZE="4"][B][COLOR="Black"]boot.img 5de0949b961663b126ea10ca7ae6a55d
modem.img f4be4b183f17d461b569df3cda9fde02
persist.img a7c90020244078eed1ee582154fda7e6
rct.img 15bc82584049ec3a7c62d921c2897267
system.img 8508f101c60c6f0491d7c282f4ccba2c
abl.img cdeb310fa2463bb1769b6944025b425b
apdp.img 7d8948ab571281de3c1a417e6490a102
cmnlib.img b5ba566a4b1408a65cd359650384d22a
cmnlib64.img 8279daae2be2dd0af5bb5ae4a5518706
devcfg.img bbf8237adabcde7cf245ab441a1a87b4
factory.img 15bc82584049ec3a7c62d921c2897267
hyp.img d1af8f3425d765296f5808d792056037
keymaster.img 3bdfcb57e44fe213b52aa9ba2c2ed706
laf.img cc2f8f56fd1f61204497a9fdf474c2d3
logfs.img c040a889d66a4f120f502f89b551f42b
msadp.img 0e9ae2a1844b00c1fe36cc48ed8eed20
pmic.img 6111bad6174e883aab16e66638a5018c
raw_resources.img e01193bb2b8767df956486b2f9a4658e
rpm.img b0398d110ca634d179916d800d48692f
sec.img 51963cce13001dc4d34baef78b1f9c3a
storsec.img b014bc7cbe90e22fa7340a43028e7988
tz.img aa00fa8531283441e36e5c6defc13a84
xbl.img 14d8d87b986dc31113e83fbb2156379c[/COLOR][/B][/SIZE]
Credits:
@autoprime
@SGCMarkus
@Chainfire
@topjohnwu
@Me :laugh:
Don´t forget to hit the thanks-button if you like my work! :good:
You want to help me with a [donation?] Feel free to make it.​

Thank you! I might try this on this weekend

Thank you @westwood24 for your service to this community.
Sent from my LG-US998 using Tapatalk

Thanks for this! Any luck with dirty flashing so far? I'm about to attempt it, myself.

If my bootloader's already unlocked it will stay that way after flashing this, correct?

sdotkdot said:
If my bootloader's already unlocked it will stay that way after flashing this, correct?
Click to expand...
Click to collapse
Absolutely

Awesome. Thanks. Just wanted to make sure

Thanks....dirty flashed over 20a then flashed magisk and all good..didn't loose anything.

Thank you! Dirty flashed over 20b, flashed magisk, everything looks great.

@westwood24
Thanks very much for the effort & hope you are well (re Hospital).
When I converted to H988 and then rooted, I also needed to flash a script to remove RCTD as well as a no-verity script.
Under features, you make a reference to verity. Does that mean those that root don't need to flash no-verity anymore?
Will we still need to flash rcdt after rooting?
Thanks again!

Mad Medik said:
@westwood24
Thanks very much for the effort & hope you are well (re Hospital).
When I converted to H988 and then rooted, I also needed to flash a script to remove RCTD as well as a no-verity script.
Under features, you make a reference to verity. Does that mean those that root don't need to flash no-verity anymore?
Will we still need to flash rcdt after rooting?
Thanks again!
Click to expand...
Click to collapse
I dirty flashed over 20b, and then re-flashed stable magisk. That's all. No need to flash additional two zips, as westwood24 dealt with it in the rom.
Sent from my LG-US998 using Tapatalk

Thank you very much! Wish you all the best

I have just completed a dirty flash from 20A to 20D and followed up with Magisk 16.0.
I noticed that the safetynet check fails in the Magisk Manager. I can't recall for sure if it was failing before?
Regardless, Google Pay and my banking app both open, so at first glance it doesn't appear to be blocking anything.

Mad Medik said:
I have just completed a dirty flash from 20A to 20D and followed up with Magisk 16.0.
I noticed that the safetynet check fails in the Magisk Manager. I can't recall for sure if it was failing before?
Regardless, Google Pay and my banking app both open, so at first glance it doesn't appear to be blocking anything.
Click to expand...
Click to collapse
It's been discussed here and in magisk forum. Seems the issue lies in the magisk manager. There are second party apps on play store that will check safetynet.
Sent from my LG-US998 using Tapatalk

Mad Medik said:
I have just completed a dirty flash from 20A to 20D and followed up with Magisk 16.0.
I noticed that the safetynet check fails in the Magisk Manager. I can't recall for sure if it was failing before?
Regardless, Google Pay and my banking app both open, so at first glance it doesn't appear to be blocking anything.
Click to expand...
Click to collapse
For most people it doesn't actually fail, it just gives cryptic message like "No valid response" but still is hidden from Android Pay, etc.

@westwood24 just wanna say thank you for this rom and the VS996 one. You have literally given me the option to go either way and that's awesome. Sent a donation your way, keep up the great work man!
Thanks to @ChazzMatt also for helping a noob like me out and getting me to these threads haha.

Tried downloading this twice from different mirrors and the boot.img md5 is coming back as wrong.
onlinemd5 comes back with : D817320CEA7CF3B4F14E19084B33C5A5
the one supplied is : 5de0949b961663b126ea10ca7ae6a55d
is this a problem on my end or is something up with it?

cajun9924 said:
Thanks....dirty flashed over 20a then flashed magisk and all good..didn't loose anything.
Click to expand...
Click to collapse
Which version of Magik did you flash, I read version 17 cause boot loop

[email protected] said:
Which version of Magik did you flash, I read version 17 cause boot loop
Click to expand...
Click to collapse
I am currently using 17.1 it fixed bootloops but you have to flash the magisk uninstall first...Did that and no problems here.

Hi @westwood24. Thank for this rom! I was used 2 month. Can you help me to make a KDZ file to zip install via TWRP?
I want to make the V300s ROM for my V30+ US998. Because the US Rom can't use Bluetooth Remote Shutter (I don't know why, The bluetooth use normaly with another devices) I was tested with old ROM V300S21e, it work fine. But I want make to make a new version ROM by myself.
Sorry for my English!

[ROM] BeyondROM V9.7 [20/03/2023] [A12 HWC1] [Mar Patch] [G970-G973-G975-F/FD]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BeyondRom V9.7
Based on Android 12 - G97xFXXSGHWC1​
Devices Supported: G970F(D), G973F(D), G975F(D)
ROM Features
<*>Aroma choices: full/dirty wipe, debloat, Bixby key remapping, Emoji</*>
<*>Supports G970F(D), G973F(D) and G975F(D)</*>
<*>Base Android 12 G975FXXSGHWC1 odex/deodex Mar 2023 patch level</*>
<*>Stock Samsung kernel</*>
<*>CSC features (camera sound menu, call recording, camera during call, etc)</*>
<*>Knox partially removed, AppLock,</*>
<*>Included the security bypass from Ian’s multidisabler</*>
<*>build.prop tweaks: call ring delay, BT passwords remember</*>
<*>Allow screenshots in secure apps</*>
<*>Reboot directly in rooted system from power menu (modded services)</*>
<*>Possibility to choose in aroma to remove the boot warning</*>
<*>Modded IncallUI with app (add Phone tile - long press for settings)</*>
<*>Latest patched twrp included in the rom zip</*>
Changelog v9.7
<*>Updated to the latest HWC1 OneUI 4.1 FW Mar 2023</*>
<*>Switched back to magisk canary - remove your actual magisk app and install magisk canary</*>
Credits
- John Wu for Magisk
- IanMacd for multidisabler
- IanMacd and Oleg for the libbluetooth fix
- Corsicanu for the TWRP
- Mr. Waehere for CRB kitchen
- WinB33 for the FontPack
- aliwaris for incallui mod
- adil192 for some shealth mods
- dutchman89 for the awesome beyond boot animation
- All people who helped me with ROM testing (Claude, Bananaman and others)
Download Links for G970F(D)/G973F(D)/G975F(D)
BR9.7 HWC1 Link
Digi Link
ALWAYS CHOOSE REBOOT TO RECOVERY AFTER FLASHING BR ROM OR WHEN REBOOTING FROM TWRP !
Dirty flash BR 9.7 over BR 9.6 is possible. You must be on at list HVJ5 FW to boot BR9.7 !!!
Installation procedure
1. You need to be already on Android 12 fw before attempting to flash BR 9.x
2. Flash latest TWRP (3.7.0_9-1 or newer patched with Magisk Canary or Alpha, not stable Magisk) in Odin (AP slot), reboot the phone in TWRP using combo keys and the USB cable connected to phone and PC
3. Wipe your data in TWRP (type YES when asked), flash Ian’s latest multidisabler (v3.1 or newer) to disable the encryption at the next reboot then flash BR 9.x
In any of the above cases, MAKE SURE THAT YOUR DATA PARTITION IS NOT ENCRYPTED!!!
If your /data partition is encrypted, flash Ian’s latest multidisabler (v3.1 or newer) and format your data in TWRP after flashing the multidisabler (Wipe data, reply YES when asked in TWRP). Beware that your ENTIRE internal SD will be wiped.
After the first boot, when you start Magisk Manager for the first time, reply with YES (agree to reboot) after MM have setup your root environment. Toggle ON the magisk hide toggle in magisk manager.
You can experiment also flashing full stock HWA3 fw + patched twrp+vbmeta with Odin using HOME_CSC to keep your data then reboot immediately in twrp and dirty flash directly BR9.x. It could work but no guarantee.
Advises
0. DON'T START FLASHING BRx WITHOUT A FULL TWRP BACKUP !!! Backup to PC your important files: documents, pics, contacts, SMS, etc.
1. Is advisable to clean flash if coming from A11. You can try to restore your previous saved data with TWRP but you can experience problems
2. If you have error 1 while flashing the ROM - usually bad ROM zip download; wipe cache + dalvik and try to flash the ROM again
3. If you like my work, consider buying me a coffee (PayPal link)
Helpful links
Telegram chat
PayPal link
Happy flashing good people!

Odin fail
On BR6-Backup Odin, I get a stop at system.img with the notice "only official released binaries are allowed to be flashed " in red on the phone.

Thank you eternally, thank you very much for all the work and effort, I am trying to download ... greetings and blessings for the whole team.

samsung s 10e rom
---------- Post added at 07:04 AM ---------- Previous post was at 07:04 AM ----------
Devices Supported: G970F

Hello.
Can anyone please attach some screenshots? Neither this or the topic from s10 have any screenshots. Thank you.
Sent from my SM-G975F using Tapatalk

flyboy43 said:
On BR6-Backup Odin, I get a stop at system.img with the notice "only official released binaries are allowed to be flashed " in red on the phone.
Click to expand...
Click to collapse
I had this issue some time ago on Pie flashing stock FW. It can happen from various reasons: old Odin version, USB cable not original or old USB2 cable, bad download, etc.
Restart the phone in download mod and try again. Please let us know if you finally succeed.
God luck.

thank you for the rom , install procedure from stock Q ?

izmenar said:
thank you for the rom , install procedure from stock Q ?
Click to expand...
Click to collapse
You can find the instructions in OP. It specifically says "if you are already on Android Q"
Sent from my SM-G975F using Tapatalk

stuck at boot, after i enable ad blocker. can't get into twrp, have to start from scratch.

starbucks2010 said:
<*>Fixed the Samsung SmartWatch BT connection</*>
Click to expand...
Click to collapse
Hi starbucks2010, would you please share the information, what you did to fix that?
Thank you very much!

Very nice.:fingers-crossed:

Thank you? very nice?

Thanks for the beautiful Rom.
Will flash it tomorrow.

Good luck guys. I hope you'll like it.

The stock firm already magisk patched? Tks
Sent from my [device_name] using XDA-Developers Legacy app

I lost root. What should I do?

Thx mate...
downloading now

guastucci said:
I lost root. What should I do?
Click to expand...
Click to collapse
Reflash the patched TWRP.

Does GravityBox work on this rom? Anyone tried?

starbucks2010 said:
Reflash the patched TWRP.
Click to expand...
Click to collapse
Tks. Still don't work for me. So I patched all the AP file with magisk and reinstall everything. Now all is good now. Tks for the rom
Sent from my [device_name] using XDA-Developers Legacy app

Magisk root Available for realmeUI & Custom ROMs. [Magisk Canary Temporarily]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So finally as seen John Wu (creator of magisk) finally fixed patching of boot.img with AVB 2.0 with vbmeta structure in it.
This guide will help how to install magisk succesfully in Custom ROMs and realmeUI.
So here is the method:
- first download magisk V22 from GitHub.
- then install the app.
- then after installing, open the app and go to settings.
- after going to settings something like this will be shown.
- now in that settings, simply switch Update channel to canary from stable.
- after that return back to app and update magisk app
- after updating,open it again
- then click on install magisk as shown below
- then it will patch the boot.img and magisk patched boot.img will be available in download.
Now here there are two methods that can be followed.
•Fastboot Method
- go to Fastboot
- now add the magisk patched boot.img in adb folder
- now for flashing that magisk patched boot.img from Fastboot, just type ' Fastboot flash boot 'xxxxxxxx.img' ( name of your image instead of x)
- now type 'fastboot reboot'
- now it should be flashed successful and magisk will be available right away with it.
- Boom! Now you are successfully rooted with Magisk!
• Recovery method
Note: you would need bugjaegar app in both and secondary device for some Fastboot functionality
- boot your device to Fastboot using key combo.
- go to recovery now using this command in bugjaegar window 'fastboot reboot recovery'.
- now, select magisk patch boot.img from downloads
- now select it as boot
- now flash it
- after flashing done, click on reboot
- now wait till booting
- after it boots, magisk will be flashed successful
- boom! Now you are successfully rooted with Magisk.
Note: if your device bootloops after flashing magisk patched boot.img in
~ Custom ROM: extract boot.img from Custom ROM zip and boot the device to Fastboot with key combo and then flash the stock boot.img using command ' Fastboot flash boot boot.img'
~ realmeUI: extract boot.img from the stock ozip by renaming ozip to zip and unzip it. boot the device to Fastboot with key combo and then flash the stock boot.img using command ' Fastboot flash boot boot.img'
All credits to testers who tested it
Am thankful to testers like Nasif Naissa, Aman Kumar, Denis. Also Sarthak Roy
Credits to John Wu for his work.

Is it truly worked on realmeUI base sir?

Dut[Z] said:
Is it truly worked on realmeUI base sir?
Click to expand...
Click to collapse
Hey, yes it is tested and works on realmeUI too.

AviationTech said:
Hey, yes it is tested and works on realmeUI too.
Click to expand...
Click to collapse
Hello brother, where can I get boot.img file?

Kashifrazabb said:
Hello brother, where can I get boot.img file?
Click to expand...
Click to collapse
The boot.img will be available in the ozip itself. If u wanna root custom roms then take boot.img from custom rom zip or else use ozip boot.img for rooting realmeUI

AviationTech said:
The boot.img will be available in the ozip itself. If u wanna root custom roms then take boot.img from custom rom zip or else use ozip boot.img for rooting realmeUI
Click to expand...
Click to collapse
AviationTech brother, are you talking about the software update ozip file I attached the link of? Boot.img file is in this ozip file?

Kashifrazabb said:
AviationTech brother, are you talking about the software update ozip file I attached the link of? Boot.img file is in this ozip file?
Click to expand...
Click to collapse
Yes

AviationTech said:
Yes
Click to expand...
Click to collapse
I am stuck in one part brother. Please help me. I have been searching since long I could't find any solution on internet.
I have doubts about vbmeta.img file. Is this file the same for all mobiles? Some people use it for mobiles and some don't to root and I don't know the reason of using it. I need this for my realme 3. Is there any official site where I can downlaod it?, I would be very thankful to you.

Kashifrazabb said:
I am stuck in one part brother. Please help me. I have been searching since long I could't find any solution on internet.
I have doubts about vbmeta.img file. Is this file the same for all mobiles? Some people use it for mobiles and some don't to root and I don't know the reason of using it. I need this for my realme 3. Is there any official site where I can downlaod it?, I would be very thankful to you.
Click to expand...
Click to collapse
Hey, kindly follow the steps as said, our device doesn't have seperate vbmeta partition hence we don't need it.

No need to unlock bootloader and twrp?