Related
soo im looking to buy a screen protector and a case, for the screen protector i want it to be nice so it feels like im actually touching the glass, and for the case something that when i put in my pocket it wont stick like most of the gel cases, soo any ideas on what i should get?
HRodMusic said:
soo im looking to buy a screen protector and a case, for the screen protector i want it to be nice so it feels like im actually touching the glass, and for the case something that when i put in my pocket it wont stick like most of the gel cases, soo any ideas on what i should get?
Click to expand...
Click to collapse
God, hit the thanks button on accident again! :/
For the screen protector I would get ReaLook.
For the case, I would just the hard case from T-Mobile.
im prob gonna pickup a realook screen protector
HRodMusic said:
im prob gonna pickup a realook screen protector
Click to expand...
Click to collapse
get realook over zagg, you wont be dissapointed. as for case, imo i like the body glove and tpu. i switch off here and there but i use the body glove mostly bcuz the tpu makes it a pain sometimes to hit the hard keys.
hey does the tpu stick to your bag? like rubber?
HRodMusic said:
soo im looking to buy a screen protector and a case, for the screen protector i want it to be nice so it feels like im actually touching the glass, and for the case something that when i put in my pocket it wont stick like most of the gel cases, soo any ideas on what i should get?
Click to expand...
Click to collapse
I have a realook screen protector and it's very nice but I always have to clean it because it's a fingerprint magnet. I bought a Skinomi screen protector from Amazon because it only cost me $1.05. I haven't tried it yet and the reviews on Amazon are less than favorable for it. Here's the link so you should take a look.
http://www.amazon.com/Skinomi-TechS...sr_1_1?ie=UTF8&s=mobile&qid=1292424498&sr=8-1
Cases & screen Protector
I had purchased a case on amazon for $1 and it sucked i went to a T-Mobile store and got the gel case that they had and it is awesome i have dropped my phone a couple of times and it still works perfectly.
The screen protector i also got from tmobile and it was really good it comes in a 2 pack for like 10 - 15
I use the T-Mobile Black gel skin case and I used to have a ZAGG screen protector but after the whole gorilla glass revelation I have not used a screen protector and have not had any problems. I have heard and seen lots of good things about reallook
I have both the body glove case and the tough case by case mate. I like the case mate one as the body glove chrome front piece is very fragile and will break.
Sent from my SGH-T959 using Tapatalk
Case-Mate Tough Case.. I purchase many different cases and the Case-mate one doesn't stick and comes in two layers without making the phone too bulky. It makes the vibrant feel solid in the hand and you won't ever have to worry about dropping it.
It's a little bit pricey at $29.99 but its worth it. It also comes with a screen protector but I personally haven't tried it out and I prefer the screen to be naked. Yet to be scratched. There is a thread on XDA in regards to the Case-mate tough case including pictures.
After purchasing this case, I looked no further and I've been satisfied with this case for months.
zephiK said:
Case-Mate Tough Case.. I purchase many different cases and the Case-mate one doesn't stick and comes in two layers without making the phone too bulky. It makes the vibrant feel solid in the hand and you won't ever have to worry about dropping it.
It's a little bit pricey at $29.99 but its worth it. It also comes with a screen protector but I personally haven't tried it out and I prefer the screen to be naked. Yet to be scratched. There is a thread on XDA in regards to the Case-mate tough case including pictures.
After purchasing this case, I looked no further and I've been satisfied with this case for months.
Click to expand...
Click to collapse
i was thinking on getting that barely case =/ i kno for a fact im getting that realook screen protector!
I second the case mate tough case. Its awesome. Goes in and out of your pocket without sticking. Plus it gives it a.great feel. Also the realook is the best. Just make sure in a.dust free environment. I read on here that the bathroom after a shower is best. That's how I installed mine and it went great.
Powered by Axura
HRodMusic said:
i was thinking on getting that barely case =/ i kno for a fact im getting that realook screen protector!
Click to expand...
Click to collapse
The barely there case is nice. I have the silver. Don't let anyone tell you that the silver one degrades the signal, it does not. The black one has a better grip, though, it's textured where the silver one is slick.
here's the silver:
http://www.youtube.com/watch?v=OHLglrlRsrw
black:
http://www.youtube.com/watch?v=sT-SEbJfW54&feature=related
I also like the realook sp, I've tried at least 5 others and realook is the best in my opinion.
HRodMusic said:
soo im looking to buy a screen protector and a case, for the screen protector i want it to be nice so it feels like im actually touching the glass, and for the case something that when i put in my pocket it wont stick like most of the gel cases, soo any ideas on what i should get?
Click to expand...
Click to collapse
As I'm sure you have come to the conclusion... reallook is the way to go when it comes to screen protectors, no questions asked. just do it.
I was stopped at the mall I live near by the people selling the invisibleSHIELDs. They called basically said i was lying that I even had a SP on my phone, because "no screen protector looks that good" and told me that i cant take a key to it... so i did and nothing happened.
Then they lost sales when the other people they stopped asked me what company mine was and found out it was half the price, ha.
and for the case i have the jell tmobile one... i got it as a "meantime" case, until i found one i liked.... and i have fell in love with it.
I've been considering getting a screen protector for a while now. The problem I have is my hands sweat very badly (gross I know) and then the touch screen on my phone goes crazy from the water on the screen. I have never had this problem with any phone I've had before now. I think it is because the Atrix touch screen is more sensitive than any other phone I've had. I was wondering if a screen protector would fix this problem and what some good brands were to try. Thanks
Sent from my MB860 using XDA App
You should always have a screen protector on any smart device you care about. One grain of sand in your pocket can ruin your screen (and your day). That said....
A screen protector will likely NOT fix your problem, as water (sweat) registers as a capacative touch. For a screen protector to "fix" the registration of sweat, it would have to also "fix" the registration of a desired capacitive touch (finger, stylus, or otherwise).
The only manner in which a screen protector could help is if you could find a very hydrophobic one (the repells and beads water), though you would still need to soak up that water with your shirt or a handkerchief or something. I'm not sure they even sell these. Google is your friend, here. Use keywords hydrophobic and/or water-repellent. Good luck, my friend, and let us know if you find anything interesting!
-omni
I tried few of a kind and decided to go with Otterbox Defender case which has a transparent front panel.
Refurbished case is about $20-25 and as good as a new one.
No need for screen protector. No mess with applying one...
What if I put on an average screen protector and then sprayed it with some form of water repellent?
Sent from my MB860 using XDA App
jadwv2210 said:
What if I put on an average screen protector and then sprayed it with some form of water repellent?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Water repellent spray wouldn't work because the screen protectors are vinyl or polyurethane and are not absorbent. Those hydrophobic sprays only work with an absorbent material like cloth or real leather.
Use car wax, something like the rain-x.
jamesc760 said:
Use car wax, something like the rain-x.
Click to expand...
Click to collapse
That's what I was talking about. It works on car windshields so it should work on a screen protector right?
Sent from my MB860 using XDA App
jadwv2210 said:
That's what I was talking about. It works on car windshields so it should work on a screen protector right?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
only one way to find out...!
I have to disagree with the statement that you have to have a screen protector, we have gorilla glass! I have never had a protector and my screen looks great! As for this situation, a protector that has a little rubberized feel might work well. I would read reviews on Amazon and buy the one that people complain the most about it sticking!
Sent from my MB860 using XDA App
FWIW, my wife has been w/o a screen protector since April and I've been with / without one on and off since June.
Still not a single scratch on either phone, however, without one the screen is too smooth, so I'm thinking of going back installing one.
Hope this helps...
I went without a screen protector for a few months. I took the phone outside and noticed TONS of very fine scratches. You could only see them in direct sunlight, but it bothered me enough that I got a screen protector shortly thereafter.
I was thinking to buy a Vikuiti ADQC27. Has anyone tried it?
Thanks
I have to second the rec for the Otterbox Defender case. Having the screen protector built in is pretty awesome and in my experience, it has withstood all kind of liquidy stuff on it and plenty of goopy stuff as well. Like those technical terms?
It hasn't hampered my touch screen through various roms with various sensitivities and my glowing review hasn't even hit all the protection benefits it gives.
Best part? I got mine for about $10 'used' on ebay and while the silicone part was a little loose, a quick email to Otterbox got me a free placement in the mail without any hassle.
I haven't used one myself, but if they make one for the Atrix and if it's what you are really looking for, Zagg stuff has made some of my friends really happy.
You should look into a Matte one where is almost smudge free
altho it looks slightly foggy and scratch easily, but its worth it
make sure u get like a few togehter on ebay so you have backup ones
I have to second the rec for the Otterbox Defender case. Having the screen protector built in is pretty awesome and in my experience, it has withstood all kind of liquidy stuff on it and plenty of goopy stuff as well. Like those technical terms?
It hasn't hampered my touch screen through various roms with various sensitivities and my glowing review hasn't even hit all the protection benefits it gives.
Best part? I got mine for about $10 'used' on ebay and while the silicone part was a little loose, a quick email to Otterbox got me a free placement in the mail without any hassle.
I haven't used one myself, but if they make one for the Atrix and if it's what you are really looking for, Zagg stuff has made some of my friends really happy.
Click to expand...
Click to collapse
I was looking for something less "bulky"
You should look into a Matte one where is almost smudge free
altho it looks slightly foggy and scratch easily, but its worth it
make sure u get like a few togehter on ebay so you have backup ones
Click to expand...
Click to collapse
Can you suggest any brand? Something like the GreatShield Ultra Anti-Glare (Matte)?
I have one on mine, steinheil (SGP), while the protector gets scratched its better than the screen getting scratched.
Can't really tell the SGP ultra crystal protector is on the screen either, other than the few scratches that are on the protector now. Comes with 2 in a package if you get them.
They have an oleophobic one that is suppose to be oil resistant, maybe that one might be ideal? The ultra fine is their matted one.
If you look at the product on their webpage the 'Select a Color' changes the type of protector they have (took me a min to find the different versions they had when I looked again).
Last while the corning glass is tough, with a vickers hardness of 622kgf/mm2 in the unstrengthened and 701 in the strengthened stuff is pretty impressive.
Spec sheet for the glass can be found from corning's site using a google search, made me curious to check it.
While pretty hard something as simple and common as sand can scratch it which has a vickers hardness of about 1000....
Keys, lighters and the like are unlikely to scratch it though as unless its hardened tool steel its hardness will likely be below 650, an edge on a tungsten ring could probably do the trick though.
Anyhow I keep one on my phone, though maybe not really necessary I'd rather have a scratched screen protector than see the glass get scratched.
I'd rather have a scratched screen protector than see the glass get scratched.
Click to expand...
Click to collapse
I am of the same mind.
Thanks for the opinion.
beaver6d9 said:
I haven't used one myself, but if they make one for the Atrix and if it's what you are really looking for, Zagg stuff has made some of my friends really happy.
Click to expand...
Click to collapse
Zagg and Skinomi are quite nice. I like the Skinomi on my tablet maybe even a bit better than the Zagg on the Atrix, but the difference is very minimal. I'd say the Skinomi may slide slightly better than the Zagg, but you're splitting hairs.
I agree with BeakHill. SGP is great except they scratch easier than Zagg. The Ultra crystal is so clear that they don't even have a cut out for the front camera. The Ultra fine is their matte model and it is good and smooth, the crystal is nicer IMO..
The problem with SGP is they spoil you to the other brands, and they are more expensive.
ive always put a total body skin on my phone in addition to a case
http://www.bestskinsever.com/motorola-atrix-4g-skin
Hello,
Do you recommend Belkin Anti-Glare Screen protector for SGS2? (if you have used it) If not, which screen protector do you recommend? The most important thing for me: It nearly shouldn't have any affect on touch screen sensitivity.
Thanks.
You see im in the camp of whats the point of a screen protector, adding another layer to screen. I just use a cheap clam flip case to keep the screen safe. Only just had S2 but never had a screen protector on my sgs for over year and never got a mark on it
Sent from my GT-I9100 using XDA App
Getting a 3M Estoc+ on Monday. These are available on GMarket's website. I'll let you know how it is on Monday ;-)
xstarbuckx said:
You see im in the camp of whats the point of a screen protector, adding another layer to screen. I just use a cheap clam flip case to keep the screen safe. Only just had S2 but never had a screen protector on my sgs for over year and never got a mark on it
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
I'm using a basic silicon case. Flip cases are protecting well but having a flap hanging around while using the phone is a little bit annoying for me. I want to use it because, Gorilla Glass screen is just scratch resistant, not scratch-proof. There are many people reporting scratches after just daily use. Also Anti-Glare films making the screen easier to slide, especially in games like Fruit Ninja
MistahBungle said:
Getting a 3M Estoc+ on Monday. These are available on GMarket's website. I'll let you know how it is on Monday ;-)
Click to expand...
Click to collapse
OK, I will be glad if you let me know about it. It looks fine. But I couldn't find any local online shop selling Estoc protectors. So, i think I'm going to buy this one tomorrow:
http://www.vatanbilgisayar.com/belkin-f8m138eb-samsung-galaxy-s2-anti-glare-ekran-koruyucu/productdetails.aspx?I_ID=58464
http://www.belkin.com/uk/IWCatProductPage.process?Product_Id=604828
I will write about it.
I have tried the SGP ultra oleophobic, and this worked well for 2 weeks, but after that it would start to attract oil, ... the opposite of what it was supposed to do, the plus side is that it doesn't have tint and the screen looks good. I am now going to try the Halo screen protector. Let us know how you screen protector turns out.
I really like the one that comes with the otterbox for the S2.
it's easy to put on and fits perfectly!
hope this helps
Definitely Zagg invisibleSHIELD.
I couldn't find them locally either. GMarket was the only place I could find them online, I split the cost of shipping with a few other people from XDA.
_lightning_ said:
OK, I will be glad if you let me know about it. It looks fine. But I couldn't find any local online shop selling Estoc protectors. So, i think I'm going to buy this one tomorrow:
I will write about it.
Click to expand...
Click to collapse
deadbeat44 said:
Definitely Zagg invisibleSHIELD.
Click to expand...
Click to collapse
Phantomskinz
You get 2,unlike zagg.
It also is much smoother, no orange peel & is not tacky unlike zagg products.
But zagg is still a very good product in my opinion.
Sent from my GT-I9100 using Tapatalk
i recommend any SGP screen protector
http://www.spigen.com/cell-phone/samsung/galaxy-s2/sgp-samsung-galaxy-s2-screen-protector-series.html
im using the ultra crystal... very clear though fingerprints are visible at times
zagg is a good brand/product ... but the invisible shield, like chrisjcks said, is not smooth which affect the touch response cause of that tacky feel of it
Received the 3M Estoc screen protector today. It's quite solid, and enables you to 'buff out' minor scratches & dings on the protector. This is due to a coating on the protector itself that obviously wears away over a period of time. It comes with a 49873 page encyclopedia with instructions on how to fit (due to having instructions in 192 different languages). The package contains the protector itself, a microfibre cleaning cloth, a cardboard thingy to smooth out the bubbles when you fit the protector and a few dust removal stickers.
Fitting was no more difficult or different to any other screen protector, just a case of making sure the screen is perfectly clean/free of dust, then slowly/carefully applying it to the screen & smoothing out the bubbles as you go.
This is a good protector if you're using a bumper case & don't have your screen covered, it will easily handle being in a pocket with other items & should protect the screen quite well. It will probably last at least a couple of months (maybe more, depending on how rough you are with your phone) if you use your phone like this. As I use a flip case, it will probably be good for much longer than this, as the face of the phone won't be exposed to the lining of pockets, keys, loose change, etc, etc.
Now to the question of value. Is it worth the ~$25 or so ? Compared to the $15 protector I had on my phone previously, and given I use a flip case which protects the screen anyways, probably not. I doubt I'll be spending another $25 on one of these when it comes time to get a new screen protector.
But if you're someone who uses bumper cases/etc & likes having a 'nudie' screen, I'd definitely recommend these. Obviously if you only order one from GMarket the shipping will make it a fairly expensive exercise, but you could always order more than one/some other stuff from that site, or find someone on XDA to go dutch on the postage who lives in your country like I did (thanks to Victaaaa for same )
The Zagg invisibleSHIELD is the best in my opinion, uses a fluid that facilitates the placement may be withdrawn and placed if things do not go well the first time, this has the orange peel effect but this in no way affects the image or touch . I used it in the first SGS for 1 year and now I'm using it in SGSll about 8 months.
i recommend sgp ultra crystal too...i am using for 5 months and i have no problem at all...fully satisfied.
Thanks for all recommendations. I couldn't have any time to buy one yet; but I hope I'm going to buy this weekend from a store near here. I'm going to buy Belkin, if I can't find it I will prefer SGP or Zagg.
xstarbuckx said:
You see im in the camp of whats the point of a screen protector, adding another layer to screen. I just use a cheap clam flip case to keep the screen safe. Only just had S2 but never had a screen protector on my sgs for over year and never got a mark on it
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
I have had my S2 since last June never had a screen protector and still as good as new
Sent from my GT-I9100 using xda premium
SGP
I use SGP Ultra Crystal and so far so good.
Zagg is probably the worse of all of them because of its tacky-ness. Also its scratch healing properties wear off after a month or so. The best is the 3M Estoc+ followed by SGP or RG Japan.
sgp ultra, solid choice in my opinion.. can't go wrong
I recommend SGP ultra crystal film or 3M estoc
I used to have an Apple iPod Touch. I got Zagg's Phone Shield for the body (not the screen) to protect it from scratches. Worked like a charm, kept out scratches, and kept the itouch slim rather than having a case which made it feel bulky. But after a couple years, it wore out (dirt getting into the sides and all), and when I took it off, the back of the ipod scratched like crazy (being in pocket, etc).
Wondering how the Samsung Body will hold up, from scratches, and possible drops? I more worried about drops damaging the phone itself though.
Also, what is the best screen protector? Spectre any good?
jaesun said:
Wondering how the Samsung Body will hold up, from scratches, and possible drops? I more worried about drops damaging the phone itself though.
Click to expand...
Click to collapse
Really? If thats your concern, you might as well get a case. The bulkier the case is...the safer your phone will be ofcourse. But i do recommend the Incipio Double cover and the SGP Flex HD screen protector. The first day i had my S3 i dropped it and it dented the top left corner. That's how fragile this phone is. But after getting the Incipio case, my phone probably dropped more than 10 times and looks like nothing happened.
Here's the link to the case i currently use: http://www.verizonwireless.com/b2c/...d=13152&accessoryId=51439&initialPhoneId=5918
babymatteo said:
Really? If thats your concern, you might as well get a case. The bulkier the case is...the safer your phone will be ofcourse. But i do recommend the Incipio Double cover and the SGP Flex HD screen protector. The first day i had my S3 i dropped it and it dented the top left corner. That's how fragile this phone is. But after getting the Incipio case, my phone probably dropped more than 10 times and looks like nothing happened.
Here's the link to the case i currently use: http://www.verizonwireless.com/b2c/...d=13152&accessoryId=51439&initialPhoneId=5918
Click to expand...
Click to collapse
well, i was likely to get the Zagg invisible shield on the body, so scratches and the likes on the body would be taken care of. Just didnt know how it would handle drops and if the samsung original case would be able to handle it (sounds like it doesnt)
jaesun said:
well, i was likely to get the Zagg invisible shield on the body, so scratches and the likes on the body would be taken care of. Just didnt know how it would handle drops and if the samsung original case would be able to handle it (sounds like it doesnt)
Click to expand...
Click to collapse
honestly though, i suggest getting the SGP Full body Set protector. Much better quality than Zagg.
Heres a link: http://www.spigen.com/cell-phone/sa...y-protector-set-incredible-shield-series.html
Coming from a Droid X, I have to say the build quality isn't nearly as nice as I thought it would be. Don't get me wrong, it feels fine in the hand, it's just between the plastic battery cover and the extremely glossy fascia, I wouldn't rely solely on a naked device to be adequate protection.
I'm pretty sure it's better than your ipod touch. The screen is covered with gorilla glass II although it's not scratch proof, but it's much better as you know. If you wanna keep the sleek look but don't want scratches, use body shield that Zagg and Skinomi are selling. I know you already got Zagg's shield, but I bet they have been updating their product. If you don't like Zagg's, try skinomi. It seems pretty popular too!
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php click for maximum coverage
http://www.skinomi.com/sk11191-samsung-galaxy-s-iii-skin-protector.html
I'm a new Axon 7 owner and am currently searching for a case to use on this phone. The stock transparent case that comes with the phone is great but due to the fact it's a glossy plastic, it attracts a lot of grease from my fingers and feels dirty after a while. I also dislike it because the sweat from my hands will form into condensation on the back of the case. I also have a problem where the jack on my headphones (Audio Technica ATH-M50) is too large to fit in the hole provided.
I decided to purchase the Spigen 'Rugged Armor' case from Amazon after reading a lot of positive comments about it, but I have been left disappointed and debating whether to return it due to the sheer size and thickness that makes handling the phone (Which is already large enough!) incredibly difficult with small hands. The case does not add much friction despite the material used having a rubber-like appearance, and I actually feel more likely to drop the phone as a result of trying to fumble with the added size. As well as this, the cut-out for the headphone jack is still too small even though it's larger than the wider than the one seen on the stock case. I also find it a lot more difficult to access the fingerprint scanner due to the thickness of the case surrounding it. Another problem is that the case is quite difficult to put onto the phone and a lot harder to remove, to the point where it feels like i'm actually going to damage the phone by attempting to do this!
For my previous phone, a Lenovo ZUK Z2, I had a fantastic Nillkin 'Frosted Shield' shell case that was made from a soft-touch rubber-like plastic. It was very slim at about 2mm in thickness at most, and although it didn't offer much in the way of drop-protection, it did have a nice textured back and that increased the grip tremendously. So, despite the case not being able to protect the phone quite as much from being dropped, it didn't matter because the chances of dropping the phone in the first place were a lot less likely. I wondered whether there was something similar for the Axon 7, but instead in a TPU-style with the sealed corners, and the same thickness as the stock case that's included with the phone? Any recommendations would be most appreciated.
This one is the best one, hands down: https://www.amazon.de/ARTILVST-umgebene-Struktur-Oberfl%C3%A4che-Protector/dp/B01MTLLSPA/ref=sr_1_fkmr2_2?ie=UTF8&qid=1505381744&sr=8-2-fkmr2&keywords=axon+7+slim+case+sand
It is ultra slim and has a very nice feel.
Sui77 said:
This one is the best one, hands down: https://www.amazon.de/ARTILVST-umgebene-Struktur-Oberfl%C3%A4che-Protector/dp/B01MTLLSPA/ref=sr_1_fkmr2_2?ie=UTF8&qid=1505381744&sr=8-2-fkmr2&keywords=axon+7+slim+case+sand
It is ultra slim and has a very nice feel.
Click to expand...
Click to collapse
That looks nice, it's kinda like the old Sandstone Black finish on the OnePlus One. There was one similar to this on Amazon UK but I don't think it had the same texture to it. My only compliant with that one is that it isn't a TPU case which completely covers the corners, but on the other hand the sand texture probably adds a lot of grip to reduce the risk of it being dropped.
I'm currently looking into getting the J&D case from their official website. It's in TPU-form which covers the entire phone (Except from the power/volume buttons!) and has the textured soft-touch back I wanted. The only problem with this one is that the glossy plastic edges look a bit tacky in the pictures, but hopefully it's not as bad in person as it looks on the website. I have a discount code which knocks a subtle 15% off the price listed, so it might be worth a shot.
Looking into this now myself. The stock clear case will go yellow as they all do. Getting cheap see through black case as a temporary till I find a good one. I find the clear one a tad loose at the side.
Sui77 said:
This one is the best one, hands down: https://www.amazon.de/ARTILVST-umgebene-Struktur-Oberfl%C3%A4che-Protector/dp/B01MTLLSPA/ref=sr_1_fkmr2_2?ie=UTF8&qid=1505381744&sr=8-2-fkmr2&keywords=axon+7+slim+case+sand
It is ultra slim and has a very nice feel.
Click to expand...
Click to collapse
Hi there,
Does this case provide good grip?
Thanks for confirming!
joaste said:
Hi there,
Does this case provide good grip?
Thanks for confirming!
Click to expand...
Click to collapse
Yes.
In my opinion it's the perfect one.
My buddies ordered it for their Samsung cause of the nice touch.
Color is anthracite, not fancy but decent
Sui77 said:
Yes.
In my opinion it's the perfect one.
My buddies ordered it for their Samsung cause of the nice touch.
Color is anthracite, not fancy but decent
Click to expand...
Click to collapse
Thanks. I'm mostly interested in the grip. I had a similar case from Amazon. fr but it was in fact quite slippery (it had a satin feel to it). Had to send it back.
The stock case that came with the Axon 7 is quite grippy but it is slowly going yellow.
joaste said:
Thanks. I'm mostly interested in the grip. I had a similar case from Amazon. fr but it was in fact quite slippery (it had a satin feel to it). Had to send it back.
The stock case that came with the Axon 7 is quite grippy but it is slowly going yellow.
Click to expand...
Click to collapse
This one is a different story.
It's the best pick you can get
Sui77 said:
This one is a different story.
It's the best pick you can get
Click to expand...
Click to collapse
Thanks. Just ordered it.
joaste said:
Thanks. Just ordered it.
Click to expand...
Click to collapse
Hey, have you received the case yet? Just wondering what you thought to it. If either you or @Sui77 could post a picture of it, that would be great as well. I'm still debating whether to choose this or the J&D TPU case that completely conceals the corners. I can't stand using the case which came with the phone much longer, as it's made from glossy plastic and attracts a lot of filth and grease. I imagine the ARTILVST case would be a lot better in this regard.
P650SE said:
Hey, have you received the case yet? Just wondering what you thought to it. If either you or @Sui77 could post a picture of it, that would be great as well. I'm still debating whether to choose this or the J&D TPU case that completely conceals the corners. I can't stand using the case which came with the phone much longer, as it's made from glossy plastic and attracts a lot of filth and grease. I imagine the ARTILVST case would be a lot better in this regard.
Click to expand...
Click to collapse
Yes I did. Or is ok, but not as grippy as I was hoping for. The original case provides more grip.
Some pics attached.
joaste said:
Yes I did. Or is ok, but not as grippy as I was hoping for. The original case provides more grip.
Some pics attached.
Click to expand...
Click to collapse
Thanks for posting those pictures! That's a shame to hear the grip wasn't as good as expected. I wanted something which provided more grip than the stock case, so maybe this isn't the right one for me. I also live in the United Kingdom and having the case shipped from Germany would make it more expensive in postage costs. It does look like a nice case but I am worried it might not offer much protection if the phone is dropped. I think the J&D case would perhaps be better because it has a soft-touch back and conceals all the corners properly.
I have that same Spigen case as above, an Incipio TPU case in smoked brown, and another thin "shell case". This thin shell offers zero protection in case it is dropped, making using one pointless , IMO.
The Incipio case is OK, but again thin and will show wear very quickly. The Spigen one is my favorite hands down, doesn't add bulk to the phone all ports easily accessable, and the edges offer good grip.
christoophat said:
I have that same Spigen case as above, an Incipio TPU case in smoked brown, and another thin "shell case". This thin shell offers zero protection in case it is dropped, making using one pointless , IMO.
The Incipio case is OK, but again thin and will show wear very quickly. The Spigen one is my favorite hands down, doesn't add bulk to the phone all ports easily accessable, and the edges offer good grip.
Click to expand...
Click to collapse
Thanks for sharing your thoughts and opinions regarding the cases available for the Axon 7. It's interesting to hear how you found the Spigen case not to be bulky, because I found the opposite and returned it for that exact reason. I eventually purchased one of the cheap, plastic shell cases from AliExpress similar to the that in the pictures Joaste posted above.
My overall opinion on this case has been positive but it has worn on the edges and there are cracks down all four corners. As you mentioned, a shell case does not offer much drop protection but it's definitely better than not having a case at all and it does improve the grip quite notably. However, I wish it had a textured or 'Sandstone' back to help avoid grease buildup.
I am now looking for another case, but options in the UK are limited since the Axon 7 is not officially sold here.
I've been using my TPU smoke black case with a glass screen protector for a while and enjoyed that. I got fed up with the Poetic Revolution case because of the dry protector built into the front. It allowed dust and stuff in between the screen and protector. Tonight I stripped out the dry protector and put the case on with the glass protector still on the screen. Fits nice. I have a full coverage protector to fit and might see if it will work with the Poetic. Might need to trim the inner edges of the corners near the speaker grilles.
I've been using this Proworx case since right after I got my Axon 7, so for a bit over a year now. I wasn't super impressed when I got it so I figured I'd replace it as soon as I found something better or it wore out, but I'm still using it, which says something about it.
It isn't the slimmest, for sure, but it isn't as bulky as the Otter Boxes and whatnot that everyone with a non-cracked iphone seems to have. It protects very well - TPU around the edges, fully covering the corners (which is a must, in my eyes), polycarbonate back, enough of a lip on top to protect the screen if you set it down face-down, and the cut-outs and buttons are perfect. Good drop protection - I've "thrown" it onto asphalt, tile, and concrete without the phone getting a scratch. Also works well with the glass screen protectors we covered in another thread. Easy enough to put on and take off too, with no chance of the phone just falling out.
Again, not the thinnest, but not huge, and the protection is excellent. Plus they're cheap and come in multiple colors. And as is typical with cheap stuff manufactured in China, I've seen this same case under at least a couple of other brand names, CoverOn for one. For $5-$6 I recommend trying it - I like it enough that I pretty much never think about replacing it, even though it (a clear one) has yellowed a tad. After trying like 10 cases for my G3 and finding faults with each of them, I can say I like this one enough that I'll probably replace it with the same one, eventually.
emepher said:
I've been using this Proworx case since right after I got my Axon 7, so for a bit over a year now. I wasn't super impressed when I got it so I figured I'd replace it as soon as I found something better or it wore out, but I'm still using it, which says something about it.
It isn't the slimmest, for sure, but it isn't as bulky as the Otter Boxes and whatnot that everyone with a non-cracked iphone seems to have. It protects very well - TPU around the edges, fully covering the corners (which is a must, in my eyes), polycarbonate back, enough of a lip on top to protect the screen if you set it down face-down, and the cut-outs and buttons are perfect. Good drop protection - I've "thrown" it onto asphalt, tile, and concrete without the phone getting a scratch. Also works well with the glass screen protectors we covered in another thread. Easy enough to put on and take off too, with no chance of the phone just falling out.
Again, not the thinnest, but not huge, and the protection is excellent. Plus they're cheap and come in multiple colors. And as is typical with cheap stuff manufactured in China, I've seen this same case under at least a couple of other brand names, CoverOn for one. For $5-$6 I recommend trying it - I like it enough that I pretty much never think about replacing it, even though it (a clear one) has yellowed a tad. After trying like 10 cases for my G3 and finding faults with each of them, I can say I like this one enough that I'll probably replace it with the same one, eventually.
Click to expand...
Click to collapse
I decided to order one of these in black to try out. Have been quite happy with my Spigen, but after installing this Proworx case yesterday, I think I am falling in love. Seems to offer enough protection, fits & looks nice, AND I kind of like how the buttons are a bit harder to push in, which actually prevents me from squeezing open the screen every time I try to pick it up. :good:
RobboW said:
I've been using my TPU smoke black case with a glass screen protector for a while and enjoyed that. I got fed up with the Poetic Revolution case because of the dry protector built into the front. It allowed dust and stuff in between the screen and protector. Tonight I stripped out the dry protector and put the case on with the glass protector still on the screen. Fits nice. I have a full coverage protector to fit and might see if it will work with the Poetic. Might need to trim the inner edges of the corners near the speaker grilles.
Click to expand...
Click to collapse
Quoting myself here.
Today I fitted the full coverage protector to my Axon 7 and it fits into the Poetic Revolution case nicely! Glad I stripped out the dry protectors in the Poetic cases. I've also now fitted a plastic protector over the glass one as a quick and easy tear off to sacrifice for wear and tear but the glass one makes the front of the phone flat. Even with two stacked protectors, touch works perfectly.
The picture is slightly misleading as the black section also covers the capacitive buttons so there's no indicator of position, but not being backlit anyway, it makes little difference.
Here's a quicky bunch of pics. I have a soft TPU smoky case, black Poetic Revolution and a blue/grey Poetic Revolution which can be mix and matched. Got a couple of little bubbles under the plastic protector and will fix that later, or just remove it. Looks good with just the full coverage glass one.
If anyone is looking for a slim case I just picked up a Bear Motion Sand from eBay. Best case I've had so far for my A7 and I've tried quite a few. Feels like my OPO did.
https://www.amazon.com/dp/B01J9Y5CQ...d_r=3683683e-ab8d-11e8-96dd-777fa7fb2507&th=1
Been using this one for over 6 months now with out any issues , not as bulky as it looks and the stand is useful . I also have a full body clear skin from clear-coat that fits superbly, clear-coat has various outlets through the UK and installs as you wait , is a bit pricey at £30 for the full skin .
I work in the building trade so need it well protected .