Okay so the thing thing is, my Xiaomi Redmi 5A suddenly died. It is stuck on the mi logo while booting until it runs out of juice. when I charge it, it shows the penguin logo, the qualcomm mode, I believe?
I can enter Fastboot mode but not Recovery.
I haven't tried flashing before and there are no service centers near me. If anyone could please please tell me what to do with it? All the threads I read showed that this occured after flashing twrp or rom but I haven't done either. Please anyone help me. I'm quite a noob when it comes to flashing. Any help is appreciated please.
Try flashing from EDL (test point) mode. What Redmi 5A are you using? You bought it from China or International version?
If you bought if from China:
1. Download China Stable fastboot firmware (Don't worry, you don't even need fastboot for this). https://xiaomifirmware.com/download/9105/
2. Download 7-Zip: https://www.7-zip.org/a/7z1805.exe
3. Install 7-Zip
4. Assuming that you have and is already using a computer, right click the firmware then click 7-Zip and click "Extract Files..."
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Go into the extracted folder and extract a file with the .gz extension
6. Download MiFlash: https://xiaomimiflashtool.com/d3kc
7. Install MiFlash
8. Open the folder where the firmware is extracted.
The files will be shown like this:
9. Copy the file location in the address bar
(I've highlighted where to copy. Don't copy the exact same address in the image!!!)
10. Paste the address into the MiFlash tool address bar.
11. Open up your phone's back cover (mandatory or there is no way to fix your phone)
12. Short this pins with some metal wire
Related
Hi dears
Really happy o be a part of this great community..
I am working in jeddah, KSA . I am not a developer. I have an issue with my redmi device. Can someone help to solve this please..
I tried to flash my Mi Note 5A (China MDT6S) 4GB 64 GB version in fast boot mode. The phone was not bootable fro 1 year, was stuck with mi logo (showed on bottom 'unlocked'). I searched internet and found firmware and tried to flash using that firmaware in fast boot mode using MiFlash tool.
File name : Xiaomi_Redmi_Note_5A_V11.0.3.0.NDFMIXM_20191022.0000.00_Global_7.1_XFT. It took 300+ seconds for many steps and then showed 'rebooting' status. I waited again, for some minutes. but then showed me timeout!!!!
Then when tried to start the device i shows penguin screen. I am trapped from there
Then i searched again over internet. Got some ideas to open the device and short the two points. I did it and connected usb cable at same time. Got my device in COM05 and tried to flash again in MiFlash tool. But cannot recieve helium packet. Also it tries to reset status and shows 'object reference not set to an instance of an object'.
I have tried different versions of flash tool.
A help from someone to solve this will be highly appreciated.
I have tried all below firmwares
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
fastboot reboot twrp.image (from https://dl.twrp.me/ugg/)
Option:Advanced Option:Sideload
adb.exe sideload PixelPlusUI_3.6_ulysse-11.0-20210621-1031-OFFICIAL.zip (from https://forum.xda-developers.com/t/rom-11-0-ulysse-pixelplusui-official-eleven-aosp.4294775/)
Reboot
First of all i apologize for my bad english.
3 days ago I put my phone in brick mode and while searching how to solve this i found i need qualcomm driver.
I downloaded and installed the necessary drivers, but when I connect my phone to the computer, I get an error like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can you help me solve this problem?
Notes:
-My phone is not charging and won't turn on
-i tried different qualcomm versions
-I tried these processes in windows 11 / 10 and windows 7, but it did not work
I will join this discussion, because i also have similar problem. I was trying to flash entire system to friends G3 32gb. But contrary to Sercan, i managed to install Qualcom driver following this guide (https://forum.xda-developers.com/t/q-wont-enter-download-mode-phone-stuck-in-boot-loop.3102900/), and finding driver, dll file and .kdz file on different sites from what guide posted. But whenever i open BoardDiag program and follow steps from the guide, when i select folder containing tot file and extracted files, BoardDiag program just shuts down and restarts from the beginning. Also i am unable to go to next screen after download mode screen, i start download mode but after that it seems like phone just shuts down (i have battery fully charged). I was also unable to flash it regularly before i tried .tot BoardDiag method. Any further help is appreciated.
Asus ROG Phone 6
1. I have installed the rom. [TOOL] RAW Firmware for ROG Phone 6 - can be used for CN -> WW converting
2. I can't turn it off or delete it.
(The firmware installed does not match the source of the device, just know your device. Not updated via FOTA)
3. I can't upgrade the firmware.
4. I would like to ask you how to do it in detail. (or easy to understand for newbies)
I want to update like a normal machine. // using rom ww //
Thank you '-'
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
me too like tat
need install tro pc with raw file via fastboot
yosef019 said:
need install tro pc with raw file via fastboot
Click to expand...
Click to collapse
Can you help me with the instructions to do that.....thanks in advance
if its a convertion you will always get that annoying msg and you wont get fota from the device and you have to manually update your device downloading the firmware zip renaming it to update.zip and placing it to te root of your device storage then restarting the device and then you will get a prompt update pop up but before that make sure to root your device then change th country flag from CN to WW all this is explained in tuttos over youtube and the xda forums , if you want me to assist you hit me up here or on telegram at @bouyhy
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Wrong CMD.
https://forum.xda-developers.com/t/recovery-unofficial-twrp-3-5-1-20210702.4300189/
i am not able to download from your link.. please give me another link of twrp for mi 11x
please
manish1012 said:
i am not able to download from your link.. please give me another link of twrp for mi 11x
please
Click to expand...
Click to collapse
the link tells you how to flash the twrp
twrp
https://sourceforge.net/projects/recovery-for-xiaomi-devices/files/alioth/
manish1012 said:
View attachment 5823123
Click to expand...
Click to collapse
Look at the path - "platform-tools_r33.0.3___SPACE____ (1)\platformtools"
Cmd should work regardless I think...
But still remove that " (1)" from the platform tools folder name , it might cause you issues down the road.
( Mi flash doesn't work if you place it in a path that has spaces like this )
Now , check again - open cmd and type
Code:
fastboot devices
Does your device show up? Did you press enter after typing fastboot devices?
If it shows up , to flash twrp :
Command is
Code:
fastboot boot "twrp.img"
Open twrp website to learn how to do a permanent flash.
Xiaomi Poco F3
Disclaimer:Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no ...
twrp.me
Next time you wanna flash something do some research first... Flashing it with the command you found on YouTube for a different device than what you're using is an easy way to break the device...
To recover you'd have to extract boot.img / vendor_boot from your rom and flash it ( Unless you're using miui you'll have a pretty bad time ... )
Hello.
I have a problem with the purchased used Xiaomi Mi 9 SE.
I bought the phone and it had an unlocked Bootloader, it was not possible to pay with it using NFC.
The phone was probably ROM 12.0.XXX I think Global.
I downloaded the Fastboot 12.5.1 EU ROM and flashed it using MiFlash.
When uploading, I checked the option - clean all and lock
The upload went smoothly and was successful.
Unfortunately, after rebooting the phone enters recovery mode and it is looped like this, it displays the message:
This MIUI version can't be installed on this device :-(
I can enter fastboot and try to flash another Rom but then I get an error that the phone is locked.
Please, help me with this issue, I don't know what to do, is it possible to fix it? ? ?
I know there are people here with really great knowledge, please help. :-(
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried to flash the ROM Global 12.0.1 again but I get the error as above
I have Miflash pro 7.3.706
Try to enter fastboot mode and flash the ROM using the flash_all script that's insideof the compressed rom by way of windows cmd or linux terminal.
Just extract the rom file until you see the folder structure there with all images and then look for a how to flash roms using fastboot. It way easier than that miui flash thing