No need any discription.
Just need flash it in magisk.
Tested on latest HOS(both stable and open beta),should work on OOS well too.
See the scrennshot below.
update 0710 based HOS openbeta12 (as well as OOS openbeta13)
https://drive.google.com/open?id=1F26jRUe6c0iVWxR5vrTqk1p68siW2qyr
daxiaamu said:
No need any discription.
Just need flash it in magisk.
Tested on latest HOS(both stable and open beta),should work on OOS well too.
See the scrennshot below.
https://drive.google.com/file/d/1eT34eLqdcfzDpT394XTy5h7TlFLPjaiY/view?usp=drivesdk
Click to expand...
Click to collapse
can i have a permission to access your file? or maybe you could upload your files to androidfilehost.com so that everyone can access the file freely. Thanks
module for magisk
Would be nice to give credits Instead of uploading without them https://forum.xda-developers.com/oneplus-5t/themes/ambient-display-t3795336
It was firstly announce on xda here https://www.xda-developers.com/enable-always-on-display-oneplus-6-oneplus-5-5t/
strongst said:
Would be nice to give credits Instead of uploading without them https://forum.xda-developers.com/oneplus-5t/themes/ambient-display-t3795336
It was firstly announce on xda here https://www.xda-developers.com/enable-always-on-display-oneplus-6-oneplus-5-5t/
Click to expand...
Click to collapse
What I want so say is:they repost the thread of my blog!
Did you recognize my id daxiaamu?my blog is http://daxiaamu.com.
My thread is http://www.daxiaamu.com/4924/
daxiaamu said:
What I want so say is:they repost the thread of my blog!
Did you recognize my id daxiaamu?my blog is http://daxiaamu.com.
My thread is http://www.daxiaamu.com/4924/
Click to expand...
Click to collapse
Please report the thread if you feel this is rude.
strongst said:
Please report the thread if you feel this is rude.
Click to expand...
Click to collapse
That's OK. I don't care.
Break face unlock [emoji24]
Sent from my ONEPLUS A5000 using Tapatalk
face unlock works great with this mod!
but no deep sleep!
It's still working like lift up instead of always on
Is there any changes I have to make
superusersu said:
It's still working like lift up instead of always on
Is there any changes I have to make
Click to expand...
Click to collapse
No, just install it and set up according to the screenshot in op. That's it. Maybe you missed to reboot after installing the module in magisk?
Installed and don't have the option as I'm the original screenshot. Magisk shows it installed
Running 8.1 xxx no limits rom. Any suggestions?
Binary Assault said:
Installed and don't have the option as I'm the original screenshot. Magisk shows it installed
Running 8.1 xxx no limits rom. Any suggestions?
Click to expand...
Click to collapse
Have you reboot after install? It works as described for me.
strongst said:
Have you reboot after install? It works as described for me.
Click to expand...
Click to collapse
Sure have
strongst said:
Have you reboot after install? It works as described for me.
Click to expand...
Click to collapse
Picture for reference
How does it work? I installed and choose always on between 8am to 22pm, then I press power button to turn off display, I guess I should see the clock floating but screen just stays black.
HTC_FUZE said:
How does it work? I installed and choose always on between 8am to 22pm, then I press power button to turn off display, I guess I should see the clock floating but screen just stays black.
Click to expand...
Click to collapse
You must set same value like start.
So if starting 8AM, end must 8AM too
Then you get your AOD ?
Sent from my OnePlus6 using XDA Labs
@daxiaamu Sorry for asking, your previous module AOD working good on OnePlus 6. So, 0710 update can flash too? Im at outstation, it's problem if anything got wrong. ,?
Sent from my OnePlus6 using XDA Labs
gege0202 said:
face unlock works great with this mod!
but no deep sleep!
Click to expand...
Click to collapse
That's normal as the display is always on
no it's not normal. with the op6 there is deep sleep, all samsung who have the aod, the deep sleep works
Related
This will prevent people from going blind early. Now there's no forced max screen brightness.
Oreo version based on 9.30.1017320, Variant: 870031230
Nougat version based on 9.20.974075
Prerequisites:
- HTC U11
Two versions below, one for magisk if you use it and the other just the regular one (not confirmed working).
If you wanna do it manually just push Camera2.apk in the zip to /system/priv-app/Camera2/
Downloads:
https://androidfilehost.com/?w=files&flid=263093&sort_by=name&sort_dir=DESC
Installation instructions:
1. Download either magisk or normal version
2. Flash in TWRP
3. If it still goes to max screen brightness, go to play store and uninstall updates for the HTC Camera app
tomascus said:
This will prevent people from going blind early. Now there's no forced max screen brightness.
Currently based off app version 9.20.954228
Prerequisites:
- Any Deodexed ROM ? (otherwise the oat file probably needs to be deleted)
Two versions below, one for magisk if you use it and the other just the regular one (not confirmed working).
If you wanna do it manually just push Camera2.apk in the zip to /system/priv-app/Camera2/
Installation instructions:
1. Download either magisk or normal version
2. Flash in TWRP
Click to expand...
Click to collapse
Great! Now, I can steal photos in low light without giving out my secret!
That's a joke, but thanks for this. I always found that annoying.
can upload difference photo?
Rhadamanthis said:
can upload difference photo?
Click to expand...
Click to collapse
Um.....I haven't flashed it yet, but I think it will simply prevent your current brightness settings from being overridden when the camera launches.
AarSyl said:
Um.....I haven't flashed it yet, but I think it will simply prevent your current brightness settings from being overridden when the camera launches.
Click to expand...
Click to collapse
Haha yep, can't really take a screenshot of that.
The camera app updated & I think it broke this MOD
Sent from my HTC U11 using XDA Labs
robshabazz said:
The camera app updated & I think it broke this MOD
Sent from my HTC U11 using XDA Labs
Click to expand...
Click to collapse
Yeah the new update would have override the changes, I'll rebase it soon on the new version.
tomascus said:
Yeah the new update would have override the changes, I'll rebase it soon on the new version.
Click to expand...
Click to collapse
another htc camera update is available
AlMaghraby said:
another htc camera update is available
Click to expand...
Click to collapse
Updated app and installation instructions.
Thanks for this. Works great on Magisk.
Plz update to V4 9.30.989526 ... apk is attached.
TheEndHK said:
Plz update to V4 9.30.989526 ... apk is attached.
Click to expand...
Click to collapse
Crashes when taking picture with front facing camera for me.
tomascus said:
Crashes when taking picture with front facing camera for me.
Click to expand...
Click to collapse
Just tested no problem here with face camera, I'm running LeedDroid rom R68.
TheEndHK said:
Just tested no problem here with face camera, I'm running LeedDroid rom R68.
Click to expand...
Click to collapse
Won't even install for me on LeeDroid R69:
westeight said:
Won't even install for me on LeeDroid R69:
Click to expand...
Click to collapse
You don't install system apps like that, they need to be placed in system partition..
tomascus said:
You don't install system apps like that, they need to be placed in system partition..
Click to expand...
Click to collapse
Ahhh, like YouTube. Forgot about that.
Thank you :highfive:
westeight said:
Ahhh, like YouTube. Forgot about that.
Thank you :highfive:
Click to expand...
Click to collapse
If you are using LeeDroid R68/69, it should come with this apk, you don't need to put it in /system by yourself.
Thanks for the update
---------- Post added at 04:50 PM ---------- Previous post was at 04:48 PM ----------
TheEndHK said:
Plz update to V4 9.30.989526 ... apk is attached.
Click to expand...
Click to collapse
does this apk have max brightness off ?
@tomascus
hey are you planning to support The latest version now that oreo is out
thanks in advance
AlMaghraby said:
@tomascus
hey are you planning to support The latest version now that oreo is out
thanks in advance
Click to expand...
Click to collapse
I'm interested as well. Thanks.
Is anyone using Google dialer instead of the OP dialer? If yes, there is a video icon now, but it's grayed out. Anyone know how to fix it? I think it's designed to work with Duo, but I can't figure out how. Thanks
You can about this above ten sections,or you can go to OP5 thread
Flash this in TWRP (from O+5 thread, TWRP method)
https://forum.xda-developers.com/oneplus-5/themes/magisk-oneplus-5-google-dialer-contacts-t3640993
You have to set default phone app to Google dialer
jomaga said:
Flash this in TWRP (from O+5 thread, TWRP method)
https://forum.xda-developers.com/oneplus-5/themes/magisk-oneplus-5-google-dialer-contacts-t3640993
You have to set default phone app to Google dialer
Click to expand...
Click to collapse
Does it work with our OP 5T as well?
noolis said:
You can about this above ten sections,or you can go to OP5 thread
Click to expand...
Click to collapse
Not sure I understood your reply? Why do I have to go to OP5 thread when I own OP5T??
M5devil said:
Not sure I understood your reply? Why do I have to go to OP5 thread when I own OP5T??
Click to expand...
Click to collapse
A google search goes always to Op5 with google dialer,and a friend of me send me the files from his phone,he has op5 everything plays perfect,and updates.
Sorry if i confuse you
M5devil said:
Does it work with our OP 5T as well?
Click to expand...
Click to collapse
Yep, using It since 3 days and working great
jomaga said:
Yep, using It since 3 days and working great
Click to expand...
Click to collapse
I installed gapps aroma and it works great from day one. But video icon is still greyed out. I guess it's only for pixel phones, unless there is a trick how to activate it
Magisk mod by me.
Test on my op5.
Works well for op5t.
For OOS&HOS OREO Only.
With this mod, you can take longshot without length limit. You guys can test it with this (World longest)webpage:http://worlds-highest-website.com/
Download
Gdrive:https://drive.google.com/open?id=1doNXZLPMADhkRXqhsgc_2ybJZ_OQALb-
Great mod.
Sent from my ONEPLUS A5000 using Tapatalk
Make op5T modo nougat please
Send some samples
Can't understand..... what does this mod do? (I can't infer from the title to this thread). Please post some sample images taken after flashed this module.
alirezaamini11 said:
Send some samples
Click to expand...
Click to collapse
smohanv said:
Can't understand..... what does this mod do? (I can't infer from the title to this thread). Please post some sample images taken after flashed this module.
Click to expand...
Click to collapse
On OnePlus, you can take extended screenshot or long screenshot. But that has a limit. This module allows you to take a screenshot of unlimited length.
He has posted a screenshot of the words longest website.
Only if you have read it carefully.
Nvm, this mod is not working from Magisk 16.3 I guess.
OxygenOS Unlimited Longshot v2.0
Hi all! I've updated the Magisk module to v2.0. The changelog for this update is as follows:
Modified the latest available apk from OxygenOS 5.1.2 for OnePlus 5
Zip aligned and signed apk
Update for Magisk v15.0+ (Template version 1500)
I haven't tested this myself as I am running a custom ROM myself and don't use OxygenOS, but it should theoretically work. Please go ahead and test it out, and if it works for you, let me know and I'll upload it to the Magisk Modules Repo as well.
Download Link: MediaFire
EDIT: Removed the link to updated module, didn't work
Bewildered Wolf said:
On OnePlus, you can take extended screenshot or long screenshot. But that has a limit. This module allows you to take a screenshot of unlimited length.
He has posted a screenshot of the words longest website.
Only if you have read it carefully.
Nvm, this mod is not working from Magisk 16.3 I guess.
Click to expand...
Click to collapse
Thanks. I understand now. I always use this extended screenshot feature but if going very long screenshot (i.e unlimited) the image may not be properly viewable).
smohanv said:
Thanks. I understand now. I always use this extended screenshot feature but if going very long screenshot (i.e unlimited) the image may not be properly viewable).
Click to expand...
Click to collapse
Hi! Could you do me a favour and please test the update that I posted a couple of posts above yours? Just want a couple of people to confirm it's working fine (since I am not running OOS myself) before I request for its addition to the Magisk Modules Repo. Thanks!
shadowstep said:
Hi! Could you do me a favour and please test the update that I posted a couple of posts above yours? Just want a couple of people to confirm it's working fine (since I am not running OOS myself) before I request for its addition to the Magisk Modules Repo. Thanks!
Click to expand...
Click to collapse
Will do in the next few hours.
shadowstep said:
Hi! Could you do me a favour and please test the update that I posted a couple of posts above yours? Just want a couple of people to confirm it's working fine (since I am not running OOS myself) before I request for its addition to the Magisk Modules Repo. Thanks!
Click to expand...
Click to collapse
Here is the test result.
I flashed in magisk and went successful. Restarted my device and visited http://www.worldslongestwebsite.com/
Once this page is loaded tried to take screenshot and here is the notification message I received. "Couldn't capture screenshot. Problem encountered while saving screenshot."
Hope it helps. You may please check what is going wrong.
I am uninstalling this module now.
smohanv said:
Here is the test result.
I flashed in magisk and went successful. Restarted my device and visited http://www.worldslongestwebsite.com/
Once this page is loaded tried to take screenshot and here is the notification message I received. "Couldn't capture screenshot. Problem encountered while saving screenshot."
Hope it helps. You may please check what is going wrong.
I am uninstalling this module now.
Click to expand...
Click to collapse
Thanks for your help! I've uploaded a test module here. Could you please test this one out when you get some time? Thanks again! Appreciate your help.
EDIT: Removed the link to test module
shadowstep said:
Thanks for your help! I've uploaded a test module (link here). Could you please test this one out when you get some time? Thanks again! Appreciate your help.
Click to expand...
Click to collapse
I tried the version you referred me. it started capturing multiple pages and I left it to run more than 50 pages before I touch on the screen to stop further capturing (the website I used was http://www.worldslongestwebsite.com/ ). During the process of capturing a message came in the ticker saying "Problem encountered with saving document" but the scrolling was continuously happening. When I toucher the screen to stop capturing, I see a toast message saying "saving...". I went to see the saved screenshop which in my device usually saved under Internal Memory/Pictures/Screenshots. I do not see the screenshot saved in there.
Verdict: It doesn't work.
Not working in 5.1.3
irdev said:
Not working in 5.1.3
Click to expand...
Click to collapse
Yes, unfortunately the mod doesn't work. Just out of curiosity, which one did you try? The updated one from this post or the test one from this post?
shadowstep said:
Yes, unfortunately the mod doesn't work. Just out of curiosity, which one did you try? The updated one from this post or the test one from this post?
Click to expand...
Click to collapse
Thanks, I tried V1.0 and it works like charm
irdev said:
Thanks, I tried V1.0 and it works like charm
Click to expand...
Click to collapse
Uh, v1.0? You mean the one in the OP? The ones I linked you to in my previous post were v2.0 and v1.1.
I have this one, and it's work
irdev said:
I have this one, and it's work
Click to expand...
Click to collapse
This is the same one that the OP has posted. Could you tell me what OxygenOS version you are on? Also, what Magisk version are you using? Thanks!
shadowstep said:
Hi all! I've updated the Magisk module to v2.0. The changelog for this update is as follows:
Modified the latest available apk from OxygenOS 5.1.2 for OnePlus 5
Zip aligned and signed apk
Update for Magisk v15.0+ (Template version 1500)
I haven't tested this myself as I am running a custom ROM myself and don't use OxygenOS, but it should theoretically work. Please go ahead and test it out, and if it works for you, let me know and I'll upload it to the Magisk Modules Repo as well.
Download Link: MediaFire
Click to expand...
Click to collapse
Please update the link OP too.
WARNING: You'll most probably loose ALL your data, and might break your phone. Please use with extreme caution!
The goal of this ROM is to experience ZUI 10.5 on any non-lenovo phone.
For a list of treble supported devices, consult and fill https://github.com/phhusson/treble_experimentations/wiki
How to flash:
1- Flash a treble pie rom (CAF vendor recommended.)
2- Extract ZUI-10-Pie-Aonly-v1.7z and flash system.img
3- If base rom isn't permissive flash permissiver.
4- Reboot
Bugs:
- Can change according to device. Bugless on whyred with PE-CAF vendor tho.
Download:
system.img for A ARM64 devices
Telegram Account: MacTavishAO In case of any problem please send me logs.
Thanks to: @erfanoabdi for surfaceflinger fix and others.
Reserved. You can follow me on github.
Can anyone try it on mido?
Please someone try this rom on zuk z2 plus..
Screen shot please
SykoraLukas said:
Can anyone try it on mido?
Click to expand...
Click to collapse
I tried and failed but eventually succeeded. The result is recorded @
Lenovo ZUI 10 - Android Pie GSI | Redmi Note 4 (Mido) {Video} https://mymidiary.blogspot.com/2019/04/lenovo-zui-10-android-pie-gsi-redmi.html
Kindest regards ?
Will this work on Lenovo Z5?
Stuck on boot logo. Vendor is CAF and flashed permissiver V2
gamzekal said:
Stuck on boot logo. Vendor is CAF and flashed permissiver V2
Click to expand...
Click to collapse
Which device ? And can u check adb is detecting ?
xperia_bird said:
Will this work on Lenovo Z5?
Click to expand...
Click to collapse
U try this rom for Lenovo Z5 ?
Gratis4ever said:
U try this rom for Lenovo Z5 ?
Click to expand...
Click to collapse
No not yet, I don't know if it would work. Cant mess up my device at the moment. Because I used it daily.
xperia_bird said:
No not yet, I don't know if it would work. Cant mess up my device at the moment. Because I used it daily.
Click to expand...
Click to collapse
I try didnt work.y
Gratis4ever said:
I try didnt work.y
Click to expand...
Click to collapse
If you want ZUI 10. There is a ported version for the Lenovo z5. Im using it right now and it works great!
xperia_bird said:
If you want ZUI 10. There is a ported version for the Lenovo z5. Im using it right now and it works great!
Click to expand...
Click to collapse
Im using Arrow OS. Really have perfect vendor. Zui 10 sometime have notification bug(example: WhatsApp)
Gratis4ever said:
Im using Arrow OS. Really have perfect vendor. Zui 10 sometime have notification bug(example: WhatsApp)
Click to expand...
Click to collapse
Indeed, but I have fixed that by removing the system app 'Security'. This app controls the permissions and thats the reason that notifications do not come.
After deleting this system app. Im getting every notification again?
I have dowloaded another security app from playstore called Malware Bytes. Its for security and anti virus. Everything is working great now.
xperia_bird said:
Indeed, but I have fixed that by removing the system app 'Security'. This app controls the permissions and thats the reason that notifications do not come.
After deleting this system app. Im getting every notification again
Click to expand...
Click to collapse
Haha. Great idea i will try to night. May u should try Arrow OS. Everything work great.
Gratis4ever said:
Haha. Great idea i will try to night. May u should try Arrow OS. Everything work great.
Click to expand...
Click to collapse
I have tried many custom roms. I actually wanted to go back stock but failed on that.
Just a tip if you remove the "Security" app, make a couple of reboots. And you will not able to access permissions page thru Setting. But I can a sure you, if a app needs permission for notification it will ask you for it and you can grant it. Works flawless.
xperia_bird said:
I have tried many custom roms. I actually wanted to go back stock but failed on that.
Just a tip if you remove the "Security" app, make a couple of reboots. And you will not able to access permissions page thru Setting. But I can a sure you, if a app needs permission for notification it will ask you for it and you can grant it. Works flawless.
Click to expand...
Click to collapse
Dude !!! He is back to stock STABLE Zui 10 Pie
Follow link
https://forum.xda-developers.com/showpost.php?p=79385406&postcount=139
Gratis4ever said:
Dude !!! He is back to stock STABLE Zui 10 Pie
Follow link
https://forum.xda-developers.com/showpost.php?p=79385406&postcount=139
Click to expand...
Click to collapse
I tried this man, but did not work for me for some reason. I still don't know why it worked for him haha! Its a mystery..
xperia_bird said:
I tried this man, but did not work for me for some reason. I still don't know why it worked for him haha! Its a mystery..
Click to expand...
Click to collapse
Same bro. How he can i dunno but i try more. May i can
Hi there coming from oneplus 7Pro and i am able to get the root but not able to find the TWRP? does it means we dont have TWRP? for our device?
I want to use that only for disabling the dm variety.... to decrypto the storage
nitinvaid said:
Hi there coming from oneplus 7Pro and i am able to get the root but not able to find the TWRP? does it means we dont have TWRP? for our device?
I want to use that only for disabling the dm variety.... to decrypto the storage
Click to expand...
Click to collapse
No twrp for op9pro yet.
DashDashCZ said:
No twrp for op9pro yet.
Click to expand...
Click to collapse
sad i saw that not even single rom not even ICE Renovate
nitinvaid said:
sad i saw that not even single rom not even ICE Renovate
Click to expand...
Click to collapse
What do u mean?
There's lineage 18.1
Static
Paranoid Android
how is there no ROMs?
nitinvaid said:
sad i saw that not even single rom not even ICE Renovate
Click to expand...
Click to collapse
Go to development section.
sorry didnt noticed those two.....
i was busy in installing viper4android but its not working.... always asking to install drivers
nitinvaid said:
sorry didnt noticed those two.....
i was busy in installing viper4android but its not working.... always asking to install drivers
Click to expand...
Click to collapse
Viper 4 Android
I recently got the OnePlus 9 pro. I also have a Galaxy S21 ultra. using seLinux permissive v2 and audio modification library modules, it was possible to install viper for Android on the S21 ultra. on this 9 Pro however, absolutely nothing is...
forum.xda-developers.com
Dev has a build of TWRP running now, it's looking good, just undergoing testing. Watch for a new thread.
djsubterrain said:
Dev has a build of TWRP running now, it's looking good, just undergoing testing. Watch for a new thread.
Click to expand...
Click to collapse
Good News! Hope soon
nitinvaid said:
sorry didnt noticed those two.....
i was busy in installing viper4android but its not working.... always asking to install drivers
Click to expand...
Click to collapse
Then you didn't look further at all it already works with 2 modules
djsubterrain said:
Dev has a build of TWRP running now, it's looking good, just undergoing testing. Watch for a new thread.
Click to expand...
Click to collapse
This are really great news, thank you!
You can't disable force disable encryption anyways, at least on stock that is.
Lossyx said:
You can't disable force disable encryption anyways, at least on stock that is.
Click to expand...
Click to collapse
Something is better then nothing.
TWRP is 1st step
Lossyx said:
You can't disable force disable encryption anyways, at least on stock that is.
Click to expand...
Click to collapse
What happens if you try? You piqued my interest
H4X0R46 said:
What happens if you try? You piqued my interest
Click to expand...
Click to collapse
On stock? Nothing, partitions are read only.
Custom ROMs might work if they allow R/W
Lossyx said:
On stock? Nothing, partitions are read only.
Custom ROMs might work if they allow R/W
Click to expand...
Click to collapse
Read only as in because we don't have a proper TWRP? Or read only as in, yeah it'll boot, but can't write anything to storage after? I'm unclear there. I don't have a 9 Pro to test this myself, but I'm in this part of XDA because I'm heavily considering getting one lol
H4X0R46 said:
Read only as in because we don't have a proper TWRP? Or read only as in, yeah it'll boot, but can't write anything to storage after? I'm unclear there. I don't have a 9 Pro to test this myself, but I'm in this part of XDA because I'm heavily considering getting one lol
Click to expand...
Click to collapse
This has nothing to do with TWRP. This is how Google has decided phones launched with A10+ should be.
Lossyx said:
This has nothing to do with TWRP. This is how Google has decided phones launched with A10+ should be.
Click to expand...
Click to collapse
Wow that's crap! Makes me wonder if a new way to decrypt will pop up at some point. Just for my own knowledge, if I tried, does this phone just bootloop? Trying to grasp the real world scenario here.