hey guys today my lenovo k8 note is dead someone help please how to get it working
i have nougat installed and the oreo update is not coming to my phone till now so i think to install it manually by sp flash tool when i install the oreo rom by sp flash tool after completion my phone does not power on even the notification light is not lighting up
even i go to service center becouse i have 6 months warranty left but they said i has a internal damage i know they are lying its a trick to remove my warranty and they also said that the phone is fall somewhere but i know what actually happen so if someone also face this problem help me
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
Related
Hi All,
Please help me My device is bricked when Flashing Lolipop 5.1.1 ROM in Device using "SP Flash Tool"
Current Condition...
is that I am not able to start Recovery mode in device because it not get power on, even not indicating Charging while plugin.
- But I getting Sound while plugin it with my computer but not displayed as drive.
- I think still it might has pre bootLoader.
- I also checked it in Device Manage in my computer it shows there but it attached and detached automatic continueeee.
Your Suggestions and help would be appreciated.
What Happen Previously With device.
1.) when i had getting continuous Force stop in play services with my 5.1.1 stock ROM and one day device was bricked i got SP Tool and find out KitKat 4.4.4 ROM along with it. Follow steps and done.
2.) In Flashed ROM getting Same problem and installed Flash ROM 2 to 3 times in Couple of months than after take the system update of 6.1.1 and after couple of weeks continuously same problem with play services.
3.)Once i tried with Lolipop 5.1.1 with SP tool and than after device is Bricked
You should flash the stock rom using sp flash tools. That might solve the problem.
You should flash the stock rom using sp flash tools. That might solve the problem.
Thanks for reply
I have been done this things too couple of times but nothing happen,
Please suggest any alternative...
Govind23 said:
You should flash the stock rom using sp flash tools. That might solve the problem.
Thanks for reply
I have been done this things too couple of times but nothing happen,
Please suggest any alternative...
Click to expand...
Click to collapse
If SP tools is not working then Only alternate is the service centre.
good morning to all the comunity
a friend recently gave me the lenovo vibe shot to run the root, for the fact of the sitema app that fill with advertising.
Of course, before doing my own thing, I had a look on the goggle and the tube, and I noticed that before installing a recovery I had to unlock the BootLoader
and I performed this procedure with the files downloaded from rusian site for unlock bootloader
I am stuck at point 9, since the phone has turned off at the end of download and now remains stationary in LENOVO POWERED BY SevenMaxs
I tried to do an update.zip from recovery the original one, but without success, stops at 49%
Tips?
Thanks in advance:good:
i have levono k8 note which gone in restarting problem. then i downloaded the 7.1.1 firmware and flash it using sp flash tool. The mistake i made was i didnt enable developer options. After flashing my phone didnt startup . then i tried firmware upgrade option in sp flash tools. that also didnt work.
then i tried formate all and download option now my phone is completely dead, it doesnt boot ,just a black screen. only notification light glows ip when i connected to charging or using p flash tools . please help me im very poor guy and i dont have money to buy one and its been almost one month i dont have phone. please try to respond.
Facing same issue
My Lenovo K8 note is not starting detection in PC and charging after flashing.
Hi, I have flashed my TAB FHD Plus tb-x606f with the wrong firmware (I suppose, because now, she's not booting.)
I was wondering if it was possible to "unbrick" my device ? I know Lenovo can do it with their machines/stuff... but I don't want to send my tablet if I can repair it.
My tablet was working perfectly before she install automaticly Android 10 on my android 9 rooted with magisk. After that, I tried to flash the new firmware with SP Flash tool, and after this process finished, by tablet stopped working. For now, all I have is a red light indicating when it is in charge. I have also a notification on my windows when I plug in usb cable connected to my tablet. I don't know if I can, like "reflash" with the right firmware or just repair boot.img or anything else.
I found that, but doesn't worked for me : https://android.stackexchange.com/questions/239533/unbricking-lenovo-tab-m10-x606f
I don't know what to do, and any help would be greatly appreciated x)
Sorry for my bad english.
Thanks.
Hi ,
would like to seek for a help , i bricked my phone when flashing the roms (crDroid 9.X for specific) ,
i don't blame the rom owner because it was stated that it might brick my phone ,
and now my phone was bricked, i don't know what can i do , Sp flash tools not working the one that i saw here in the forum
when using the bypass , there's an error actually its an IO error after the watch dog ?
so i cannot use the sp flash to flash my phone
any other ideas how to recover the phone
there's an indicator light when plugging in to laptop/charger
my laptop can detect the phone
no display , doesnt charge , just an indicator light
this is now okay will marked this as solved . i managed to fix this without using SP flash tool