I've got DU 12.2 OFFICIAL installed on my phone now and am having some problems, Any gapps i try to install fails, i can receive calls but cant make any using data or wifi, my memory card works fine in the phone but doesn't show up on the computer, when i hook my phone up to the computer i cant get into download/fastboot mode, shows no devices on the devices command. i have to boot into fastboot by powering off the phone and doing the volume down + power then everything works fine. Any ideas what I may have done wrong or what the problem might be?? I was on stock Oreo 8.0 rooted w/twerp installed, done a full wipe a couple times before i flashed just to be safe..
Gapps are preinstalled. Do not flash any. I haven't had any calling issues with Sprint. Memory card shows up with adb disabled for windows and enabled for Linux. Adb reboot-bootloader works for me on both windows 7 and Linux. APM works as well from developer options (Advanced Power Menu).
Just my experiences running DU for the past two months
Uzephi said:
Gapps are preinstalled. Do not flash any. I haven't had any calling issues with Sprint. Memory card shows up with adb disabled for windows and enabled for Linux. Adb reboot-bootloader works for me on both windows 7 and Linux. APM works as well from developer options (Advanced Power Menu).
Just my experiences running DU for the past two months
Click to expand...
Click to collapse
Hi, what steps did you take to flash the rom?? I tried to reflash again with the same results. I wiped everything except OEM and micro SD card. did you flash the official or one of the weeklies?? this is the version ive been trying to flash: du_nash-v12.2-20180511-0850-OFFICIAL
blake .l said:
I've got DU 12.2 OFFICIAL installed on my phone now and am having some problems, Any gapps i try to install fails, i can receive calls but cant make any using data or wifi, my memory card works fine in the phone but doesn't show up on the computer, when i hook my phone up to the computer i cant get into download/fastboot mode, shows no devices on the devices command. i have to boot into fastboot by powering off the phone and doing the volume down + power then everything works fine. Any ideas what I may have done wrong or what the problem might be?? I was on stock Oreo 8.0 rooted w/twerp installed, done a full wipe a couple times before i flashed just to be safe..
Click to expand...
Click to collapse
I can give you my experience with DU. I ran the RC version which had recently had the issue with sdcard fixed. Like Uzephi said, no need for gapps, they're already baked in. As for adb/fastboot, you just need to reinstall the drivers, and manually add the moto adb driver when your device is in charge only mode. Then you should be able to run those commands just like always. I can elaborate more on that if you need. As far as flashing, I followed the flashing instructions for the AOSiP rom and flashed the 27.1 prep zip as well. Though the prep zip might be unnecessary if you have oreo on both slots. Uzephi would know better than I as far as that goes. I know the RCs and weeklies are signed differently, so no dirty flashing between the two. It might be better to flash the prep zip to have a clean slate on both slots.
Anyway, that was my experience. Hope that answers some of your questions.
blake .l said:
Hi, what steps did you take to flash the rom?? I tried to reflash again with the same results. I wiped everything except OEM and micro SD card. did you flash the official or one of the weeklies?? this is the version ive been trying to flash: du_nash-v12.2-20180511-0850-OFFICIAL
Click to expand...
Click to collapse
I use RC since I live on the wild side (I have tried to hard brick this phone so many times, only thing I won't try is locking BL since that's a stupid way to hard brick.) Airwalk says it perfectly. If you have Oreo on both slots, no need for the prep zip. I flash twrp.zip after booting into twrp, reboot recovery, flash rom, flash twrp again, reboot recovery, flash my kernel, flash magisk, reboot bootloader, fastboot -w, then boot to system.
Obviously I take more steps than needed. That's to flash my kernel, root and twrp after the flash before booting which isn't advised (wild child over here), you should fully boot first, then do the flashing of root, kernel, twrp, etc.
41rw4lk said:
I can give you my experience with DU. I ran the RC version which had recently had the issue with sdcard fixed. Like Uzephi said, no need for gapps, they're already baked in. As for adb/fastboot, you just need to reinstall the drivers, and manually add the moto adb driver when your device is in charge only mode. Then you should be able to run those commands just like always. I can elaborate more on that if you need. As far as flashing, I followed the flashing instructions for the AOSiP rom and flashed the 27.1 prep zip as well. Though the prep zip might be unnecessary if you have oreo on both slots. Uzephi would know better than I as far as that goes. I know the RCs and weeklies are signed differently, so no dirty flashing between the two. It might be better to flash the prep zip to have a clean slate on both slots.
Anyway, that was my experience. Hope that answers some of your questions.
Click to expand...
Click to collapse
You beat me to it! I think we have a race going on here, lol. You are correct 100% though
41rw4lk said:
I can give you my experience with DU. I ran the RC version which had recently had the issue with sdcard fixed. Like Uzephi said, no need for gapps, they're already baked in. As for adb/fastboot, you just need to reinstall the drivers, and manually add the moto adb driver when your device is in charge only mode. Then you should be able to run those commands just like always. I can elaborate more on that if you need. As far as flashing, I followed the flashing instructions for the AOSiP rom and flashed the 27.1 prep zip as well. Though the prep zip might be unnecessary if you have oreo on both slots. Uzephi would know better than I as far as that goes. I know the RCs and weeklies are signed differently, so no dirty flashing between the two. It might be better to flash the prep zip to have a clean slate on both slots.
Anyway, that was my experience. Hope that answers some of your questions.
Click to expand...
Click to collapse
Good deal brother thanks for the info.... I will give it a try for sure.....
blake .l said:
Good deal brother thanks for the info.... I will give it a try for sure.....
Click to expand...
Click to collapse
Let us know how it goes
Uzephi said:
Let us know how it goes
Click to expand...
Click to collapse
Well guys I followed the the flashing instructions for the install guide from the AOSiP ROM to the "T" going from stock 27.1 Oreo 4 different times today to no avail, I came up with the same outcome as before. No calling, mem card not showing up on computer, having to manually boot into fastboot and so on. I downloaded Los 15.1 and followed the same procedure as with DU and it works like a charm. I just hope now it keeps getting updates Thanks again for your help and suggestions guys
blake .l said:
Well guys I followed the the flashing instructions for the install guide from the AOSiP ROM to the "T" going from stock 27.1 Oreo 4 different times today to no avail, I came up with the same outcome as before. No calling, mem card not showing up on computer, having to manually boot into fastboot and so on. I downloaded Los 15.1 and followed the same procedure as with DU and it works like a charm. I just hope now it keeps getting updates Thanks again for your help and suggestions guys
Click to expand...
Click to collapse
Try the RC from 0509. I have been running it since the 9th with no issues.
I've tried to follow the instructions here (https://plus.google.com/communities...5/stream/2a745c1e-aae6-4b50-93dd-14417258d7ce).
I did a huge mistake of thinking that flashing for slot a and slot b was the same of step (2/2) I saw in the screen.
I was coming from Stock Nougat (7.1.1) and, most probably, I finished having oreo in one slot and nougat in the other.
I reflashed TWRP as per instructions.
When I tried to reboot, phone got dead (no charge, no turning on, and no bootloader...). This scared me totally. I unbrick some Asus, Google and Samsung before. But this time it was too premature and having no bootloader is unbelievable.
Will the AOSiP guide will work now for me? I'm with Oreo (don't know how to check if on both slots...), but if a new phone.
Does anybody know why we can't have a DU thread here in xda?
Technical said:
I've tried to follow the instructions here (https://plus.google.com/communities...5/stream/2a745c1e-aae6-4b50-93dd-14417258d7ce).
I did a huge mistake of thinking that flashing for slot a and slot b was the same of step (2/2) I saw in the screen.
I was coming from Stock Nougat (7.1.1) and, most probably, I finished having oreo in one slot and nougat in the other.
I reflashed TWRP as per instructions.
When I tried to reboot, phone got dead (no charge, no turning on, and no bootloader...). This scared me totally. I unbrick some Asus, Google and Samsung before. But this time it was too premature and having no bootloader is unbelievable.
Will the AOSiP guide will work now for me? I'm with Oreo (don't know how to check if on both slots...), but if a new phone.
Does anybody know why we can't have a DU thread here in xda?
Click to expand...
Click to collapse
See this thread for my experience with a similar issuehttps://forum.xda-developers.com/z2-force/help/gotta-super-slim-brick-t3798403
mookiexl said:
See this thread for my experience with a similar issuehttps://forum.xda-developers.com/z2-force/help/gotta-super-slim-brick-t3798403
Click to expand...
Click to collapse
Posted there, thanks. But I'm not sure if it is all the same, for all Z2 models. I can't find a DU step by step tutorial. There are some details that expert people are not writing and I'm new to Motorola, slot a/b, etc. I'm not a newbie, just that this phone has a lot of peculiarities...
Technical said:
Posted there, thanks. But I'm not sure if it is all the same, for all Z2 models. I can't find a DU step by step tutorial. There are some details that expert people are not writing and I'm new to Motorola, slot a/b, etc. I'm not a newbie, just that this phone has a lot of peculiarities...
Click to expand...
Click to collapse
My AOSiP instructions is how I installed to the T. I did no other steps. I did that on every install from stock to an AOSP based ROM. I have not yet bricked to 9008 mode to try blank flashing yet to verify instructions on how to do that.
Uzephi said:
My AOSiP instructions is how I installed to the T. I did no other steps. I did that on every install from stock to an AOSP based ROM. I have not yet bricked to 9008 mode to try blank flashing yet to verify instructions on how to do that.
Click to expand...
Click to collapse
Thanks. I've moved to https://forum.xda-developers.com/showpost.php?p=76754449&postcount=24 to ask you about .zip preparation file for XT1789-05 model.
Uzephi said:
Try the RC from 0509. I have been running it since the 9th with no issues.
Click to expand...
Click to collapse
Well I tried the RC from 05/09/18 and the newest version of RC, followed the same flashing guide to the "T"and got the same results, phone can receive calls but cant make any, cant boot to fastboot through computer etc. went back to Los and all works fine. I dont know what the problem is wit DU and my phone..
blake .l said:
Well I tried the RC from 05/09/18 and the newest version of RC, followed the same flashing guide to the "T"and got the same results, phone can receive calls but cant make any, cant boot to fastboot through computer etc. went back to Los and all works fine. I dont know what the problem is wit DU and my phone..
Click to expand...
Click to collapse
They tell you need to flash to both slots. Here on xda, devs say we need to flash ROM just to one slot. Of course, I'm not sure this is the problem. Just trying to imagine myself at DU.
By the way, are there any settings (customization) present in DU that AOSIP does not have?
Technical said:
They tell you need to flash to both slots. Here on xda, devs say we need to flash ROM just to one slot. Of course, I'm not sure this is the problem. Just trying to imagine myself at DU.
By the way, are there any settings (customization) present in DU that AOSIP does not have?
Click to expand...
Click to collapse
A few things, yes. Mainly the dirty tweaks in settings
Didn't really care for the DU. Although it does have working 4g on sprint(much props there). I just didn't personally like the "feel" of it. I'm rockin the unofficial LOS 15.1 right now and its pretty lovely. I'm limited to ROMs b/c of sprint but so far LOS kicks ass.
Related
Hey guys,
I think I'm a little bit in trouble: I just got a OP3 and wanted to root it as I'm used to it from the OPO.
But there were problems because of Force Encyption... After a few trys and flashs, I flashed Stock OOS (
OnePlus3Oxygen_16_OTA_013_all_1608061823_765c081a5c8e4dad.zip
) from TWRP and after rebooting...
THE SCREEN IS YELLOW AND FULL OF PIXELS (like an olt TV).
You can feel it works from vibrations but you can't see what's going on... I tried this for unbricking but no success.
I think my phone's display drivers might be broken but idk.
Does anyone maybe know what to do here?
Peybro said:
Hey guys,
I think I'm a little bit in trouble: I just got a OP3 and wanted to root it as I'm used to it from the OPO.
But there were problems because of Force Encyption... After a few trys and flashs, I flashed Stock OOS (
OnePlus3Oxygen_16_OTA_013_all_1608061823_765c081a5c8e4dad.zip
) from TWRP and after rebooting...
THE SCREEN IS YELLOW AND FULL OF PIXELS (like an olt TV).
You can feel it works from vibrations but you can't see what's going on... I tried this for unbricking but no success.
I think my phone's display drivers might be broken but idk.
Does anyone maybe know what to do here?
Click to expand...
Click to collapse
Unbrick guide method 2 should fix it, otherwise ask Oneplus support.
Peybro said:
Hey guys,
I think I'm a little bit in trouble: I just got a OP3 and wanted to root it as I'm used to it from the OPO.
But there were problems because of Force Encyption... After a few trys and flashs, I flashed Stock OOS (
OnePlus3Oxygen_16_OTA_013_all_1608061823_765c081a5c8e4dad.zip
) from TWRP and after rebooting...
THE SCREEN IS YELLOW AND FULL OF PIXELS (like an olt TV).
You can feel it works from vibrations but you can't see what's going on... I tried this for unbricking but no success.
I think my phone's display drivers might be broken but idk.
Does anyone maybe know what to do here?
Click to expand...
Click to collapse
Which TWRP are you using? Try using the latest from eng.stk's (Blue Spark).
If you want MM, the more stable and improved version is 3.2.8. What you downloaded is 3.2.4. So, download 3.2.8 and boot into recovery, wipe system, dalvik cache, cache and data including internal storage (you will lose all your files including photos, videos etc). Boot the phone into the bootloader mode and push the ROM to the phone and flash it from recovery or flash the ROM from PC using adb commands. Flash TWRP again and boot into recovery and if ok, boot into system. If everything is ok, you can flash SuperSU/Magisk, if you need root. A couple of wipes of both the caches in between may also be done.
If this doesn't sort out the issue, use Method 2 from the Mega Unbrick Guide in XDA and follow every instruction scrupulously, especially relating to drivers.
If even this fails, it is a hardware issue.
EDIT: I see that Puddi Puddin beat me to it.
Puddi_Puddin said:
Unbrick guide method 2 should fix it, otherwise ask Oneplus support.
Click to expand...
Click to collapse
tnsmani said:
If this doesn't sort out the issue, use Method 2 from the Mega Unbrick Guide in XDA and follow every instruction scrupulously, especially relating to drivers.
If even this fails, it is a hardware issue.
Click to expand...
Click to collapse
Step 8 doesn't work for me...
I guess the phone goes back to the repair company then
tnsmani said:
Which TWRP are you using? Try using the latest from eng.stk's (Blue Spark).
If you want MM, the more stable and improved version is 3.2.8. What you downloaded is 3.2.4. So, download 3.2.8 and boot into recovery, wipe system, dalvik cache, cache and data including internal storage (you will lose all your files including photos, videos etc). Boot the phone into the bootloader mode and push the ROM to the phone and flash it from recovery or flash the ROM from PC using adb commands. Flash TWRP again and boot into recovery and if ok, boot into system. If everything is ok, you can flash SuperSU/Magisk, if you need root. A couple of wipes of both the caches in between may also be done.
Click to expand...
Click to collapse
I am using the newest (twrp-3.1.1-2-oneplus3.img) but the problem is that I can't see anything in recovery or elsewhere :/
Peybro said:
Step 8 doesn't work for me...
I guess the phone goes back to the repair company then
Click to expand...
Click to collapse
Well you have really messed up something it seems.. This shouldnt be happening by rooting and stuff, I think it is pure coincidence
Peybro said:
Hey guys,
I think I'm a little bit in trouble: I just got a OP3 and wanted to root it as I'm used to it from the OPO.
But there were problems because of Force Encyption... After a few trys and flashs, I flashed Stock OOS (
OnePlus3Oxygen_16_OTA_013_all_1608061823_765c081a5c8e4dad.zip
) from TWRP and after rebooting...
THE SCREEN IS YELLOW AND FULL OF PIXELS (like an olt TV).
You can feel it works from vibrations but you can't see what's going on... I tried this for unbricking but no success.
I think my phone's display drivers might be broken but idk.
Does anyone maybe know what to do here?
Click to expand...
Click to collapse
What exactly did you flash other than OOS and recovery? Why did you need a few flashes? You flashed SuperSU or Magisk? Root still works on an encrypted system so not understanding some things from your post
Puddi_Puddin said:
Well you have really messed up something it seems.. This shouldnt be happening by rooting and stuff, I think it is pure coincidence
Click to expand...
Click to collapse
I hope so - maybe the repair company messed the screen connection up and they fix it for free... :angel:
Renosh said:
What exactly did you flash other than OOS and recovery? Why did you need a few flashes? You flashed SuperSU or Magisk? Root still works on an encrypted system so not understanding some things from your post
Click to expand...
Click to collapse
First I flashed newest TWRP and Paranoid Android but it wasn't as good as expected and so I flashed back to OOS (_008 I think) and everything worked but when I wanted to flash Magisk (because SafetyNet) via TWRP I couldn't because the phone wanted a pattern to unlock encryption.
I read that it would be the same as I used to unlock my phone (btw the only 1 I use) but it didn't work...
Before I found a guide with the right order to remove the encryption I tried different ways by myself (that's because I flashed a few times) (Toolkit, "Fastboot format userdata", TWRP format) but nothing removed it.
Then I wanted to follow that guide but meanwhile there was no OS at all and img Install via fastboot didn't work but I managed to get the newest stable OOS (_16 I think) on the phone, installed it with TWRP aaaaaand...
YELLOW-ORANGEish PIXEL SCREEN
fastboot and everything works - I just can't see what's going on
Peybro said:
I hope so - maybe the repair company messed the screen connection up and they fix it for free... :angel:
First I flashed newest TWRP and Paranoid Android but it wasn't as good as expected and so I flashed back to OOS (_008 I think) and everything worked but when I wanted to flash Magisk (because SafetyNet) via TWRP I couldn't because the phone wanted a pattern to unlock encryption.
I read that it would be the same as I used to unlock my phone (btw the only 1 I use) but it didn't work...
Before I found a guide with the right order to remove the encryption I tried different ways by myself (that's because I flashed a few times) (Toolkit, "Fastboot format userdata", TWRP format) but nothing removed it.
Then I wanted to follow that guide but meanwhile there was no OS at all and img Install via fastboot didn't work but I managed to get the newest stable OOS (_16 I think) on the phone, installed it with TWRP aaaaaand...
YELLOW-ORANGEish PIXEL SCREEN
fastboot and everything works - I just can't see what's going on
Click to expand...
Click to collapse
I already asked you to use the TWRP from eng.stk
The official 3.1.1-2 works well with OOS but is cranky with custom ROMS. eng.stk's works both with OOS and custom ROMs.
tnsmani said:
I already asked you to use the TWRP from eng.stk
The official 3.1.1-2 works well with OOS but is cranky with custom ROMS. eng.stk's works both with OOS and custom ROMs.
Click to expand...
Click to collapse
I can give it a try later (and in the future when everything works again) but I do not think (at least I can't imagine) that the problem I have comes from recovery.
I know the reason!
I found other people who also had a static screen and they said they could fix it by pressing the screen back on its contacts...
I did so and it worked!... A bit... For a few minutes...
So the static definitely wasn't the result of rooting and stuff but the repair company's fault.
I hope they accept their mistake and fix it. Thx for everyone here trying to hel me!
P.S.
tnsmani said:
I already asked you to use the TWRP from eng.stk
The official 3.1.1-2 works well with OOS but is cranky with custom ROMS. eng.stk's works both with OOS and custom ROMs.
Click to expand...
Click to collapse
And as soon as I can I will try this TWRP
-------------------------------- Edit: --------------------------------
(Just in case people get same problem)
[after Mega Unbrick Method 2 finally worked (I put the stock zip in the tool's folder)]
This morning I restarted the phone just because and I could see what was going on on the phone - but the display was still crazy with yellow tint and colorful stripes etc.). After setup it asked me to download & install newest stock rom; I did and after reboot everything was fine again....
Don't know what happened here but it seems to work again.
I have been trying to flash Lineage 15.1 (or any rom for that matter!) and the bootloader keeps relocking itself. I am at my the end of my patience. After I think everything goes fine, the initial what I think to be the 1st boot comes up with the "Your device software is corrupt and cant be started" message and I boot to bootloader and sure enough, "oem locked" is BACK AGAIN. What could be causing this? I am far from new to flashing roms but damn this thing is kicking my tail. The stock rom seems to boot fine now, but its sooo buggy and most importantly of why Im trying to rom, the phone bootloops with an SD card inserted.
EDIT: Maybe it has something to do with the 2 different slots, A and B? Ive never delt with this kinda thing before.
I really hate the stock rom with it being so buggy and it wont read my SD cards correctly but Im about to stick with it cause of this. Any help will be appreciated!!
Josh McGrath said:
I have been trying to flash Lineage 15.1 (or any rom for that matter!) and the bootloader keeps relocking itself. I am at my the end of my patience. After I think everything goes fine, the initial what I think to be the 1st boot comes up with the "Your device software is corrupt and cant be started" message and I boot to bootloader and sure enough, "oem locked" is BACK AGAIN. What could be causing this? I am far from new to flashing roms but damn this thing is kicking my tail. The stock rom seems to boot fine now, but its sooo buggy and most importantly of why Im trying to rom, the phone bootloops with an SD card inserted.
EDIT: Maybe it has something to do with the 2 different slots, A and B? Ive never delt with this kinda thing before.
I really hate the stock rom with it being so buggy and it wont read my SD cards correctly but Im about to stick with it cause of this. Any help will be appreciated!!
Click to expand...
Click to collapse
I'm not sure about Los, a quick look shows it has a different flashing process than DU or Aosip, so I can't comment on that. I know that when you flash DU or Aosip from stock #1 there is a 27.1 tmo/sprint pre flash zip that must be flashed or you'll fail, #2 you have to fastboot -w at the end to erase userdata and such, which I believe is shared between both slots but only used by the currently active. The bootloader re-lock is weird, but as far as the corrupt software, it does sound like a discrepancy between the two slots. That's what the 27.1 pre flash zip is for, it flashes both slots with the same base so they don't trip over each other. You might even need to flash it before you install Los, I haven't tried that one yet, just DU and Aosip so far. Aosip was the first one I tried, and the guide works perfectly, and the same guide works for DU as well. Have you flashed the pre flash zips before trying any roms?
Your bootloader is locking itself because you didn't flash the firmware. Flash the firmware in AOSiP thread to stop that from happening.
41rw4lk said:
I know that when you flash DU or Aosip from stock #1 there is a 27.1 tmo/sprint pre flash zip that must be flashed or you'll fail, #2 you have to fastboot -w at the end to erase userdata and such, which I believe is shared between both slots but only used by the currently active. The bootloader re-lock is weird, but as far as the corrupt software, it does sound like a discrepancy between the two slots.
Click to expand...
Click to collapse
Yes. If you're on a device with Oreo on one slot and Nougat on another, flashing the ROM will make the device fall over on it's heels and smack it's face on the pavement. (Relock itself to prevent damage).
Yes, /data doesn't have a second slot, only firmware files, OEM and system are two slotted.
Uzephi said:
Yes. If you're on a device with Oreo on one slot and Nougat on another, flashing the ROM will make the device fall over on it's heels and smack it's face on the pavement. (Relock itself to prevent damage).
Yes, /data doesn't have a second slot, only firmware files, OEM and system are two slotted.
Click to expand...
Click to collapse
Well this is my 4th replacement which the 1st one was the only one that was my fault as I didn't install aosip correctly and it said "no os installed" and I rebooted anyway, insta 9008 brick.
All of them shipped with Oreo on them so I assume they would be on both slots
Sent from my [device_name] using XDA-Developers Legacy app
Josh McGrath said:
Well this is my 4th replacement which the 1st one was the only one that was my fault as I didn't install aosip correctly and it said "no os installed" and I rebooted anyway, insta 9008 brick.
All of them shipped with Oreo on them so I assume they would be on both slots
Click to expand...
Click to collapse
You give Motorola too much credit. Flash the firmware and you'll be golden. I know this. I recovered from that brick.
Uzephi said:
You give Motorola too much credit. Flash the firmware and you'll be golden. I know this. I recovered from that brick.
Click to expand...
Click to collapse
How did you recover from the 9008 brick? My screen wouldn't even come on.
I feel like I am asking for someone to hold my hand with this device but when you say flash the firmware, do you mean flash twice, one to slot a and one slot b?
Also, does oem need to be wiped in twrp? I can't find any info on that either.
41rw4lk said:
Have you flashed the pre flash zips before trying any roms?
Click to expand...
Click to collapse
I actually have not flashed any firmware files when I tried any roms. I'm running stock rom now and the texting bugs are making me lose my mind.
Thanks for the help, I really appreciate it. This phone confuses me ?
Josh McGrath said:
How did you recover from the 9008 brick? My screen wouldn't even come on.
I feel like I am asking for someone to hold my hand with this device but when you say flash the firmware, do you mean flash twice, one to slot a and one slot b?
Also, does oem need to be wiped in twrp? I can't find any info on that either.
Click to expand...
Click to collapse
There is a blank flash floating around somewhere. It's on Invisiblek's site. It was the only way to fix the issue. It put me back on nougat and had to take Oreo OTA again.
Edit: the .bat file that flashes the firmware will flash it to both slots
Uzephi said:
There is a blank flash floating around somewhere. It's on Invisiblek's site. It was the only way to fix the issue. It put me back on nougat and had to take Oreo OTA again.
Edit: the .bat file that flashes the firmware will flash it to both slots
Click to expand...
Click to collapse
Wow. I'm impressed with Motorola that they actually made it fixable with the 9008 mode. I have that flash all so I guess if I screw up it's not the end of my phone at least.
Sent from my [device_name] using XDA-Developers Legacy app
First, let me say I have been using rooted phones with twrp for several years and never had the slightest problem with them, so I generally know what I am doing, but the Mi A2 Lite is just a disaster area for me, not with Magisk, that works fine, but twrp seems impossible for me to install on 10.0.3.0 without soft bricking ( I had twrp installed on 10.0.2.0 and 10.0.1.0 so I am not unfamiliar with the method, but on 10.0.3.0 - no way). I have done so many factory resets now I have my own parking space at the factory! (That is humour btw).
So I wondered if a different approach to the problem might work. I am not a coder or phone guru, so what I propose might be nonsense, if it is I am sure somebody will tell me.
We are all used to the concept of the 'patched_boot.img' created by Magisk and if you don't want to produce your own version the forum usually has a link to it. Magisk though is not the problem, twrp is, so what I am proposing is that somebody provides a link to a 'double_patched_boot.img' ie a flashable boot image that contains both twrp and magisk and that can directly replace the stock boot via fastboot.
Apparently there are some folks that have managed to install both twrp and magisk on 10.0.3.0, so if one of them could extract the 'double_patched_boot.img' from their phone it might help out a lot. How do you achieve that? Well there is probably more than one way, but the way that I would choose (if I could manage to install them both in the first place) is to boot into twrp, connect to pc, take a miflash backup of the phone and then unzip it with the following command (this is a linux command I am sure someone can provide a windows equivalent):
Code:
tar -xzf ********.tgz
where ********.tgz is the name of your miflash backup.
Then extract the boot.img from the resulting folder, rename it to something like 'double_patched_boot_10.0.3.0.img' and provide a link to it on the forum. Then some brave soul could try it out (probably not me as I am sick of doing factory resets and don't have any backups because I don't have any recovery to make them from).
OTOH this might just not be practical, I don't know enough to be sure.
i was having similar issues. replaced my mi a2 lite and followed the guide for the aosp 109 gsi here in the forum replacing the fstab and one other file i forgot they name but it's instructed. i have twrp zero the fixed one, magisk, and I'm running the RR PIE ROM with zero issues and I've been back and forth in and out of recovery no problem. I'm pretty sure it will work for you too.
12:121390 said:
i was having similar issues. replaced my mi a2 lite and followed the guide for the aosp 109 gsi here in the forum replacing the fstab and one other file i forgot they name but it's instructed. i have twrp zero the fixed one, magisk, and I'm running the RR PIE ROM with zero issues and I've been back and forth in and out of recovery no problem. I'm pretty sure it will work for you too.
Click to expand...
Click to collapse
Interesting. I have certainly thought of jumping ship to a custom rom, but I would like to wait a little before I do so, ideally until someone fires up a Lineage rom for the A2 Lite. But if things continue as badly as they have done so far with stock roms then I might well join you on RR.
viking777 said:
Interesting. I have certainly thought of jumping ship to a custom rom, but I would like to wait a little before I do so, ideally until someone fires up a Lineage rom for the A2 Lite. But if things continue as badly as they have done so far with stock roms then I might well join you on RR.
Click to expand...
Click to collapse
also because of the new ARB thing, custom is much safer, i think i bricked my last device rolling back from ota 9.0 software to ota 8.1. that's a non-issue with custom. just something to be wary of. the current RR pie gsi is near flawless for he so far. hope that helps a little
12:121390 said:
also because of the new ARB thing, custom is much safer, i think i bricked my last device rolling back from ota 9.0 software to ota 8.1. that's a non-issue with custom. just something to be wary of. the current RR pie gsi is near flawless for he so far. hope that helps a little
Click to expand...
Click to collapse
Anti roll back is disabled and not an issue if bootloader is unlocked
Nice thread. Tried it as well but no chance 10.0.3.00 + twrp + magisk. And you are right the problem is twrp.
Sent from my Phh-Treble vanilla using Tapatalk
12:121390 said:
i was having similar issues. replaced my mi a2 lite and followed the guide for the aosp 109 gsi here in the forum replacing the fstab and one other file i forgot they name but it's instructed. i have twrp zero the fixed one, magisk, and I'm running the RR PIE ROM with zero issues and I've been back and forth in and out of recovery no problem. I'm pretty sure it will work for you too.
Click to expand...
Click to collapse
Does RR Pie have any issues on Mi A2 Lite? Whichever GSI I'd tried, I had lags :/
12:121390 said:
i was having similar issues. replaced my mi a2 lite and followed the guide for the aosp 109 gsi here in the forum replacing the fstab and one other file i forgot they name but it's instructed. i have twrp zero the fixed one, magisk, and I'm running the RR PIE ROM with zero issues and I've been back and forth in and out of recovery no problem. I'm pretty sure it will work for you too.
Click to expand...
Click to collapse
brother i also want to install RR PIE Rom can you please give me the guide link?
hossman said:
Anti roll back is disabled and not an issue if bootloader is unlocked
Click to expand...
Click to collapse
correct it is not. what happened was.. lol. i thought i was crafty and did some file swapping and made miflash setups that would flash so the stock files as usual , but with gsi's like RR and/or bootleggers for the system image. and it works, up until i flashed from RR to bootleggers with those setups described previously . there is where my genius was flawed. lol. lesson learned
---------- Post added at 06:43 AM ---------- Previous post was at 06:38 AM ----------
marstonpear said:
Does RR Pie have any issues on Mi A2 Lite? Whichever GSI I'd tried, I had lags :/
Click to expand...
Click to collapse
for me, i have not come across anything caused by the GSI. any issues I've faced are purely self inflicted.
I don´t get your problems... Just boot twrp, and install it as described in original thread.
After that flash back aboot from 9.6.11.0 and the message "your system got destroyed" will disappear!
Voodoojonny said:
I don´t get your problems... Just boot twrp, and install it as described in original thread.
After that flash back aboot from 9.6.11.0 and the message "your system got destroyed" will disappear!
Click to expand...
Click to collapse
You might not get my problem, but likewise I don't get your solution. Firstly aboot has never been touched during the attempted twrp install so why flash it at all, it has not been changed, and secondly you suggest I flash it with something that is how many versions old 4?, 5?, I'm not sure, when just about every post you ever read stresses that you should not mix old and new partitions at the same time.
I hope you forgive my scepticism, but can you actually suggest the slightest reason why this might work?
Or is it all just voodoo johnny (sorry, couldn't resist that).
viking777 said:
You might not get my problem, but likewise I don't get your solution. Firstly aboot has never been touched during the attempted twrp install so why flash it at all, it has not been changed, and secondly you suggest I flash it with something that is how many versions old 4?, 5?, I'm not sure, when just about every post you ever read stresses that you should not mix old and new partitions at the same time.
I hope you forgive my scepticism, but can you actually suggest the slightest reason why this might work?
Or is it all just voodoo johnny (sorry, couldn't resist that).
Click to expand...
Click to collapse
Aboot is the bootloader. Since Pie the aboot was modified to check wheather there are modification on your boot.img. So everytime you modify something (like installing twrp), you get the message "your system got destroyed".
9.6.11.0 is the last version of Oreo. Here the bootloader didn´t check boot.img.
That´s why you need to flash 9.6.11.0 - maybe the older verstions will work too. Didn´t check. But I guess only 9.6.11.0 will work becouse it was the latest oreo version and it had to have a bootloader which can boot up pie (to have ota working).
Here you can find the aboot.img I use... and which works without any problem on pie - right now I´m running 10.0.3.0...
Just flash it via fastboot.
Voodoojonny said:
Aboot is the bootloader. Since Pie the aboot was modified to check wheather there are modification on your boot.img. So everytime you modify something (like installing twrp), you get the message "your system got destroyed".
9.6.11.0 is the last version of Oreo. Here the bootloader didn´t check boot.img.
That´s why you need to flash 9.6.11.0 - maybe the older verstions will work too. Didn´t check. But I guess only 9.6.11.0 will work becouse it was the latest oreo version and it had to have a bootloader which can boot up pie (to have ota working).
Here you can find the aboot.img I use... and which works without any problem on pie - right now I´m running 10.0.3.0...
Just flash it via fastboot.
Click to expand...
Click to collapse
OK that makes sense now - thank you for the explanation. I will probably give that a try sometime, but not right now as I have a stable working phone for the first time in ages and I don't want to jeopardise that.
Just one question though. When I had twrp installed on 10.0.2.0, it was fine at doing backups, but on the two occasions I tried to restore with them they failed, by which I don't mean that the restore didn't repair the phone, but that it was impossible to even carry out the restore, it started but did not complete - just ended with 'Restore Failed' message.
Have you tried any restores with twrp installed in the manner you suggest and if so did they work? No point in installing it otherwise.
viking777 said:
OK that makes sense now - thank you for the explanation. I will probably give that a try sometime, but not right now as I have a stable working phone for the first time in ages and I don't want to jeopardise that.
Just one question though. When I had twrp installed on 10.0.2.0, it was fine at doing backups, but on the two occasions I tried to restore with them they failed, by which I don't mean that the restore didn't repair the phone, but that it was impossible to even carry out the restore, it started but did not complete - just ended with 'Restore Failed' message.
Have you tried any restores with twrp installed in the manner you suggest and if so did they work? No point in installing it otherwise.
Click to expand...
Click to collapse
There seems to be some bugs restoring system and vendor... Some users talked about... I usually only save and restore the data and boot partition and I never had any problems with that. For all other partitions you can use miflash or fastboot...
Yeah all my twrp full backups don't work after a fresh stock installment either, that's very annoying.
The twrp version for daisy is bugged. Backups are not working, the wifi with GSI Roms on pie stock is not working anymore as soon as twrp is installed as well.
Sent from my Phh-Treble vanilla using Tapatalk
Thanks for the replies above. @voodoojohnny
In my case it was the data partition that caused the restore to fail, vendor and system and boot all seemed to go through normally. @cd492
Based on what you say along with my own experiences and those of voovoojohnny, it looks like twrp is more trouble than it is worth at the moment. I think I will make do without it for now and hope for a better version in the future.
viking777 said:
First, let me say I have been using rooted phones with twrp for several years and never had the slightest problem with them, so I generally know what I am doing, but the Mi A2 Lite is just a disaster area for me, not with Magisk, that works fine, but twrp seems impossible for me to install on 10.0.3.0 without soft bricking ( I had twrp installed on 10.0.2.0 and 10.0.1.0 so I am not unfamiliar with the method, but on 10.0.3.0 - no way). I have done so many factory resets now I have my own parking space at the factory! (That is humour btw).
So I wondered if a different approach to the problem might work. I am not a coder or phone guru, so what I propose might be nonsense, if it is I am sure somebody will tell me.
We are all used to the concept of the 'patched_boot.img' created by Magisk and if you don't want to produce your own version the forum usually has a link to it. Magisk though is not the problem, twrp is, so what I am proposing is that somebody provides a link to a 'double_patched_boot.img' ie a flashable boot image that contains both twrp and magisk and that can directly replace the stock boot via fastboot.
Apparently there are some folks that have managed to install both twrp and magisk on 10.0.3.0, so if one of them could extract the 'double_patched_boot.img' from their phone it might help out a lot. How do you achieve that? Well there is probably more than one way, but the way that I would choose (if I could manage to install them both in the first place) is to boot into twrp, connect to pc, take a miflash backup of the phone and then unzip it with the following command (this is a linux command I am sure someone can provide a windows equivalent):
where ********.tgz is the name of your miflash backup.
Then extract the boot.img from the resulting folder, rename it to something like 'double_patched_boot_10.0.3.0.img' and provide a link to it on the forum. Then some brave soul could try it out (probably not me as I am sick of doing factory resets and don't have any backups because I don't have any recovery to make them from).
OTOH this might just not be practical, I don't know enough to be sure.
Click to expand...
Click to collapse
THIS HAS NOT BEEN TESTED ON GSI'S YET
I'm currently in the process of RR with TWRP but having extreme Encryption errors
Grab these two files (Big Thanks to Zerovoid, Seryioo, and mac12m99)
Fixed SDCard Support TWRP Image File (Put this on your SDCard and Computer)-
https://forum.xda-developers.com/mi...unofficial-twrp-daisy-mount-sd-fixed-t3889390
Fixed SDCard Support TWRP Installer Zip (Put this on your SDCard)-
https://androidfilehost.com/?fid=11410963190603893418
But I got TWRP on 10.0.3.0 with magisk, and Justic Kernel.
THIS WILL WIPE YOUR DEVICE I'M DEFINITELY NOT RESPONSIBLE FOR LOST DATA
Start with the phone being on with USB Debugging enabled correctly
Type adb reboot bootloader
So flash the 10.0.3.0 ROM through MiFlash using the flash_all.bat, this process has to be done so backup your data before erasing.
After it is done flashing it restarts, go ahead and hold power and volume down right back to the Bootloader
Type: fastboot boot twrp-3.2.3-0-daisy_zero.img
It would boot into TWRP, if you see something about decryption hit cancel this may mean you haven't followed directions so far
Tap install and find your SD Card, find the fixed-twrp-installer-daisy.zip where ever you put it on your SD Card and install it, this process takes a few minutes when finished DO NOT HIT REBOOT SYSTEM!
Hit the home button back to TWRP home screen and tap reboot >>> bootloader
Download this to your computer - https://androidfilehost.com/?fid=11410963190603884024
Type: fastboot flash aboot aboot_9.6.4.img
Then type: fastboot reboot
Afterwards your phone shall boot up to Android if it does hold power and volume up and release power and keep hold volume up when the screen turns back on to go-to recovery, if TWRP boots up you have successfully completed the task.
Now flash Magisk zip (optional)
Hopefully this helped kind of my first tutorial, this was my process.
InfinityXDA said:
THIS HAS NOT BEEN TESTED ON GSI'S YET
I'm currently in the process of RR with TWRP but having extreme Encryption errors
Grab these two files (Big Thanks to Zerovoid, Seryioo, and mac12m99)
Fixed SDCard Support TWRP Image File (Put this on your SDCard and Computer)-
https://forum.xda-developers.com/mi...unofficial-twrp-daisy-mount-sd-fixed-t3889390
Fixed SDCard Support TWRP Installer Zip (Put this on your SDCard)-
https://androidfilehost.com/?fid=11410963190603893418
But I got TWRP on 10.0.3.0 with magisk, and Justic Kernel.
THIS WILL WIPE YOUR DEVICE I'M DEFINITELY NOT RESPONSIBLE FOR LOST DATA
Start with the phone being on with USB Debugging enabled correctly
Type adb reboot bootloader
So flash the 10.0.3.0 ROM through MiFlash using the flash_all.bat, this process has to be done so backup your data before erasing.
After it is done flashing it restarts, go ahead and hold power and volume down right back to the Bootloader
Type: fastboot boot twrp-3.2.3-0-daisy_zero.img
It would boot into TWRP, if you see something about decryption hit cancel this may mean you haven't followed directions so far
Tap install and find your SD Card, find the fixed-twrp-installer-daisy.zip where ever you put it on your SD Card and install it, this process takes a few minutes when finished DO NOT HIT REBOOT SYSTEM!
Hit the home button back to TWRP home screen and tap reboot >>> bootloader
Download this to your computer - https://androidfilehost.com/?fid=11410963190603884024
Type: fastboot flash aboot aboot_9.6.4.img
Then type: fastboot reboot
Afterwards your phone shall boot up to Android if it does hold power and volume up and release power and keep hold volume up when the screen turns back on to go-to recovery, if TWRP boots up you have successfully completed the task.
Now flash Magisk zip (optional)
Hopefully this helped kind of my first tutorial, this was my process.
Click to expand...
Click to collapse
Thank you very much for posting this process in such detail, unfortunately I think you must have missed my last post where I said:
it looks like twrp is more trouble than it is worth at the moment. I think I will make do without it for now and hope for a better version in the future.
Click to expand...
Click to collapse
I meant it, at least for now, but maybe your post will help somebody else.
viking777 said:
Thank you very much for posting this process in such detail, unfortunately I think you must have missed my last post where I said:
I meant it, at least for now, but maybe your post will help somebody else.
Click to expand...
Click to collapse
Yes I didn't see that post but understand I didn't give you links to the official TWRP, I gave you the unofficial fixed TWRP which actually features SD Card Support and trust me it works completely fine I haven't had a problem yet. This took me hours upon hours to figure out what I was doing wrong.
The only specific reason you are not successfully getting TWRP is because you didn't flash the aboot.img after installing the zip.
I hope this helps you in the future!
thanks InfinityXDA for the tutorial, you should create a post just for it~
Hey everyone,
I've been trying to install Lineage OS on my Moto Z2 Force for about two months now and I'm starting to get pretty desperate
Every time I try to sideload Lineage via ADB (after flashing TWRP), the sideload fails at 47% stating "Total xfer: 1.00x". I tried half a dozen different versions of Lineage nightly for nash (15 and 16) but the result was always the same. I wasn't able to find a solution to my problem on the internet so I'd love for you to share your thoughts on this!
vincetoxicum said:
Hey everyone,
I've been trying to install Lineage OS on my Moto Z2 Force for about two months now and I'm starting to get pretty desperate
Every time I try to sideload Lineage via ADB (after flashing TWRP), the sideload fails at 47% stating "Total xfer: 1.00x". I tried half a dozen different versions of Lineage nightly for nash (15 and 16) but the result was always the same. I wasn't able to find a solution to my problem on the internet so I'd love for you to share your thoughts on this!
Click to expand...
Click to collapse
Awhile back I tried los, but I was having trouble with sideload too. I ended up just flashing it in twrp like a regular rom. Others who use los more and have more experience with it might have a better answer for you, but that worked for me. Just make sure that you have the base firmware required installed, and don't forget to format data.
Normally working fine. Read carefully the manual from lineage.org and learning by doing. Read the changelogs, too. That's helpful and read so much ypu can about A/B partion and if then working, don't update over Updater for few days. There is a bug, which is in the next days be fixed. So, you must invest some time to understand all. Here it was not easy, too. Maybe 2 days to learn from mistakes. Then you get it working.
41rw4lk said:
Awhile back I tried los, but I was having trouble with sideload too. I ended up just flashing it in twrp like a regular rom. Others who use los more and have more experience with it might have a better answer for you, but that worked for me. Just make sure that you have the base firmware required installed, and don't forget to format data.
Click to expand...
Click to collapse
Thank you for your reply! So what exactly would you propose I do? Wipe with TWRP first, then return to Fastboot and flash los from there?
Before booting I'd like to install an open gapps package which must be done before booting los for the first time. Could I do that via Fastboo as well?
vincetoxicum said:
Hey everyone,
I've been trying to install Lineage OS on my Moto Z2 Force for about two months now and I'm starting to get pretty desperate
Every time I try to sideload Lineage via ADB (after flashing TWRP), the sideload fails at 47% stating "Total xfer: 1.00x". I tried half a dozen different versions of Lineage nightly for nash (15 and 16) but the result was always the same. I wasn't able to find a solution to my problem on the internet so I'd love for you to share your thoughts on this!
Click to expand...
Click to collapse
Just flash it through twrp like a normal rom I have never heard of anyone sideloading a custom rom. If you're using a carrier variant of the Moto Z2 Force that may give you some issues too.
Hybrid Theory said:
Just flash it through twrp like a normal rom I have never heard of anyone sideloading a custom rom. If you're using a carrier variant of the Moto Z2 Force that may give you some issues too.
Click to expand...
Click to collapse
The wiki says to sideload for a reason -- you can bungle up FBE encryption keys by storing stuff in TWRP on a device where FBE decruption in TWRP is attempted (nash).
vincetoxicum said:
Thank you for your reply! So what exactly would you propose I do? Wipe with TWRP first, then return to Fastboot and flash los from there?
Before booting I'd like to install an open gapps package which must be done before booting los for the first time. Could I do that via Fastboo as well?
Click to expand...
Click to collapse
Follow the wiki description - it's a TWRP bug that sideload only goes to 47% - though it has actually suceeded. It would turn red and say "Failed" if it failed.
41rw4lk said:
Awhile back I tried los, but I was having trouble with sideload too. I ended up just flashing it in twrp like a regular rom. Others who use los more and have more experience with it might have a better answer for you, but that worked for me. Just make sure that you have the base firmware required installed, and don't forget to format data.
Click to expand...
Click to collapse
See above - it didn't fail.
Because of the A/B partition, you can only install through a temporary twrp. If you try permanent twrp, you won’t be able to boot
Same problem with Lineage Recovery. Followed exactly the wiki but it stays the same 15.1 version.
I'm on T-Mobile and I ALWAYS had that problem, totally forgot about it at this point. Just ignore it, the rom is flashes successfully anyway
Dany XP said:
I'm on T-Mobile and I ALWAYS had that problem, totally forgot about it at this point. Just ignore it, the rom is flashes successfully anyway
Click to expand...
Click to collapse
Well, but after reboot the new rom is not flashed or active (might be in one of A/B but no switch of slots).
carlos22b said:
Well, but after reboot the new rom is not flashed or active (might be in one of A/B but no switch of slots).
Click to expand...
Click to collapse
You might be right but last time I fastboot flashed anything was some time ago. Maybe after flashing I had to manually switch slot? I don't remember. I'm in Lineage 16 and is working great
Dany XP said:
You might be right but last time I fastboot flashed anything was some time ago. Maybe after flashing I had to manually switch slot? I don't remember. I'm in Lineage 16 and is working great
Click to expand...
Click to collapse
Ok. How can I change the slot manually?
carlos22b said:
Ok. How can I change the slot manually?
Click to expand...
Click to collapse
Of course, there Is a fastboot command for that, very simple. Just google it
Changed it so slot b - now bootloop in both a and b
This A/B system is really no help for custom roms...
Now try to flash with temporary twrp.
Same here.
Device: sweet TWRP: 3.6.1 and 3.6.2
Bash:
adb sideload CARBON-CR-9.0-R-WEEKLY-sweet-20230501-0124.zip
serving: 'CARBON-CR-9.0-R-WEEKLY-sweet-20230501-0124.zip' (~47%)
adb: failed to read command: Success
ROM flashed, booted, and seem to work fine.
EDIT:
It is normal. Found this:
https://www.reddit.com/r/LineageOS/comments/af12lu/_/edvwaex
That's an ADB issue, nothing is wrong with the device, cable, PC or the installation process.
If I remember correctly (from a discussion long ago), Google's ROMs are transferred about 2.2 times across the sideload. To make the progress bar add up to 100%, they said "2.2 times the file size equals 100%". Our ZIPs are transferred just once, so the final progress is at about 47% with a success. The xfer seems to show the transferred data compared to the file size. Ours clocks in at x1.00 or x1.01, while Google's is about x2.something.
Click to expand...
Click to collapse
Hello, Sorry to bug you guys...I read multiple different fourms/how2s and I guess I'm a little mixed at what i should do. I Have the oneplus 7t (hd1505) with android 11 rooted, and after that I installed NikGapps after I had it rooted, then flashed nethunter. Was in the terminal as root, all was well..I believe It rebooted and would'nt boot to rom so i went and re'did magisk, may have used a different patched magisk? but now is stuck fastboot. Cant get it to boot.
Sorry for the maybes but I had brain surgry and my memories not the best. Everything was going fine so I didn't document things like normal. Anyways, Is there a program that helps with thiss? MSM somthing? or could anyone please point me in to a nice how2 or some quality links to assist? I really apprricate it, normally I'd just test till I get it, but I think I may be at a point where I could really mess it up.
5k1tz0 said:
Hello, Sorry to bug you guys...I read multiple different fourms/how2s and I guess I'm a little mixed at what i should do. I Have the oneplus 7t (hd1505) with android 11 rooted, and after that I installed NikGapps after I had it rooted, then flashed nethunter. Was in the terminal as root, all was well..I believe It rebooted and would'nt boot to rom so i went and re'did magisk, may have used a different patched magisk? but now is stuck fastboot. Cant get it to boot.
Sorry for the maybes but I had brain surgry and my memories not the best. Everything was going fine so I didn't document things like normal. Anyways, Is there a program that helps with thiss? MSM somthing? or could anyone please point me in to a nice how2 or some quality links to assist? I really apprricate it, normally I'd just test till I get it, but I think I may be at a point where I could really mess it up.
Click to expand...
Click to collapse
If you don't care about data then use msm tools to factory restore. Or you can flash boot image of the rom you were using (unpatched) in fastboot mode itself.
No need to keep data, I'd prefer to wipe device and start fresh instead of getting stuck on the concept of A/B partitions. I get the CMD getvar, but I'm not sure if i flashed the lineage OS to one or both...at 1 point i think i was booted in A, now its saying B. I got overeager and downloaded multiple ROMs and not sure which one worked. In the past I usually downloaded a few and the first one to work I used. Not smart...I know. If I wanted to wipe all and start fresh with gaspps and root, where/how should I do that? I can't just fasatboot oem unlock , could I? Would you recommend stock OS? Lineage? Thanks for your help BTW.
5k1tz0 said:
No need to keep data, I'd prefer to wipe device and start fresh instead of getting stuck on the concept of A/B partitions. I get the CMD getvar, but I'm not sure if i flashed the lineage OS to one or both...at 1 point i think i was booted in A, now its saying B. I got overeager and downloaded multiple ROMs and not sure which one worked. In the past I usually downloaded a few and the first one to work I used. Not smart...I know. If I wanted to wipe all and start fresh with gaspps and root, where/how should I do that? I can't just fasatboot oem unlock , could I? Would you recommend stock OS? Lineage? Thanks for your help BTW.
Click to expand...
Click to collapse
Go to this thread for MSM Tool download and instructions: Unbrick tool to restore your device to OxygenOS