Related
Hello everyone
I have been really confused about this and i want to confirm if Viper4Android is working on our phone or not... And if its working can someone write a short guide on how to install Viper4Android and its drivers...
Working great.. no special things for installation... just install app, open app and install driver, reboot
mhp1995 said:
Hello everyone
I have been really confused about this and i want to confirm if Viper4Android is working on our phone or not... And if its working can someone write a short guide on how to install Viper4Android and its drivers...
Click to expand...
Click to collapse
Not working here. always asks to install the driver after reboot.
To get it working all I did was root my phone, installed viper4android.
After opening the app it asked to install the drivers I let it, then rebooted
everything worked just fine.
Viper4Android needs your phone to be on Permissive Kernel.
Working!!! Ty everyone will post a link and how-to install guide in my thread
bmwkeith said:
Not working here. always asks to install the driver after reboot.
Click to expand...
Click to collapse
you probably forgot to set your selinux to permissive. download selinux mode changer here on XDA and the u'll be able to install the driver
Anyone know how to get convolver to work with CM 12.1 nightly on z00A?
Hi, can somebody confirm that Viper4android works without issues on the original rom?, i mean by this that after a reboot the app starts itself, as in my case I have to start the app to get its functionality working on my player
Thanks
is viper4android safe? It asks for a lot of permmisons
yeah viper4android is safe i have been running it since my galaxy s3 and never looked backed best app i have ever come across as far as boosting audio quality.
also guys having problems with not hearing any differance i had the same problem at first then i found a thread in general with a modified audio_policy.config file i had to replace with the original one then v4a worked a charm also kernel has to be permissive too so try it again with the modified audio_policy if you gave up because i nearly did
Not really working for me. I did the se permissive then installed v4a then installed driver and reboot. Now I'm using it mainly for Spotify and it works sometimes but then sometimes it will stop working unless I unplug the headphones and plug back in or sometimes it just stop working at all
Download the viper 4 android guitardedhero bought in my Zenfone max working.
Hi all,
I have installed Magisk 16.0 based on Maik93's post, and Xposed Framework SDK27 90.2-beta3 (Systemless), through Magisk modules.
When I enable the Xposed module, the phone first shows endless boot animation, and when restarting it again, it boots, but the Xposed app seems not installed (not listed in Settings->Apps and its icon is not present in chooser), although, in Magisk, it is visible in the Modules and it's checkbox is checked.
Did anybody successfully installed Xposed with A2 Lite? What can be the problem?
Thanks a lot,
Circum
Did you install the apk of xposed?
---------- Post added at 11:51 PM ---------- Previous post was at 11:46 PM ----------
https://forum.xda-developers.com/attachment.php?attachmentid=4393082&d=1516301692
Here is the link from xda
No, sorry, I was not aware that it is a separate thing.
Now I have installed, but it says that no Xposed Framework is installed. If I try to install a framework from inside the installer (90-beta3), it -- obviously -- reports an error that /system/framework/XposedBridge.jar already exist...
Because of this, I cannot enable any module from Xposed Installer.
Any tips what do I do wrong?
I want to use Xposed too but we will have to wait for TWRP I guess.
Not sure what happened to you, did you tried ti reboot your phone? Mine is working just fine
mik.y said:
I want to use Xposed too but we will have to wait for TWRP I guess.
Click to expand...
Click to collapse
You can install now through Magisk if you want, if yiu get bootloopbfor any xposed module, just flash thr original boot.img
HoangP05 said:
You can install now through Magisk if you want, if yiu get bootloopbfor any xposed module, just flash thr original boot.img
Click to expand...
Click to collapse
I was able to install it somehow,but stuck after each reboot in process. Now some apps are diying like call enhancement and some test app. So its quite dirty. I have Magist 16.0 installed.
Lol,I cant connect to internet with xposed to download any module. Useless
mik.y said:
I was able to install it somehow,but stuck after each reboot in process. Now some apps are diying like call enhancement and some test app. So its quite dirty. I have Magist 16.0 installed.
Lol,I cant connect to internet with xposed to download any module. Useless
Click to expand...
Click to collapse
Not all are working apparently, but if it is bootloop, you so try to let it boot again, press power and volume down as the same time while it bootloop, the second boot always work for me
There is TWRP for Mi A2 Lite.
Search on google.
NOTICE: For now there isn't official TWRP. There'w unofficiak fork which can you install using fastboot. :good:
Not sure what happened, AFAIK I have rebooted the phone at least once, but after rebooting again, it said that the framework is installed, but has some problem with it and not functioning (yellow background, sorry, I forgot to take a screenshot), and rebooting once again solved the problem, I can confirm that Xposed works.
But as others mentioned, installing Magisk itself makes problems with the boot. Booting always stucks, I always needed (even before installing Xposed) to long-press power after several minutes and the second try usually boots up.
Now having Magisk and Xposed (and GravityBox) installed usally need to restart booting twice (i.e., the 3rd boot works).
Any suggestions how to debug / get logs about this problem?
HoangP05 said:
Not sure what happened to you, did you tried ti reboot your phone? Mine is working just fine
Click to expand...
Click to collapse
Xposed's Gravity box module works on Mi A2 lite?
Yes, GravityBox is working, although as I mentioned, there are issues with boot - I have to reboot several times until it succeeds...
performace drops significantly when i install the xposed module for magisk. i hope they fix it.
So far everything works fine on my end, I'm not noticing any performance drops in my day to day use. Then again I haven't used it much without Magisk + exposed but from what i'm seeing it's working well, no noticeable lag or stuttering.
I have gravity box, Amplify and Greenify modules running.
circum said:
Not sure what happened, AFAIK I have rebooted the phone at least once, but after rebooting again, it said that the framework is installed, but has some problem with it and not functioning (yellow background, sorry, I forgot to take a screenshot), and rebooting once again solved the problem, I can confirm that Xposed works.
But as others mentioned, installing Magisk itself makes problems with the boot. Booting always stucks, I always needed (even before installing Xposed) to long-press power after several minutes and the second try usually boots up.
Now having Magisk and Xposed (and GravityBox) installed usally need to restart booting twice (i.e., the 3rd boot works).
Any suggestions how to debug / get logs about this problem?
Click to expand...
Click to collapse
Magisk alone didnt give me boot problems. What rooting guide did you follow?
fake__knv said:
Magisk alone didnt give me boot problems. What rooting guide did you follow?
Click to expand...
Click to collapse
I used this one: https://forum.xda-developers.com/mi-a2-lite/how-to/guide-install-magisk-device-t3825626
But before the update. Since that I have removed Magisk to enable the OTA update, and did not put it back yet -- although, there are many small areas I feel the lack of root...
circum said:
I used this one: https://forum.xda-developers.com/mi-a2-lite/how-to/guide-install-magisk-device-t3825626
But before the update. Since that I have removed Magisk to enable the OTA update, and did not put it back yet -- although, there are many small areas I feel the lack of root...
Click to expand...
Click to collapse
I can assure you @BubuXP's guide is good. Used his rooting guide, followed the steps for updates and its good to go. I rooted my phone when Im on August update. Now Im in September update
Sorry for the noob question.
Running a Pixel 2XL - Pie April '19 Security Build, Magisk v19.0. When trying to install Viper4Android FX v4.1, I have tried seemingly every combination of options, but cannot get the 2.5.0.5 driver to install.
Both the material and regular app install and as a system or user app. Just the driver never gets installed?
Please advise if I've missed something obvious - thanks in advance!
Try flashing in TWRP.
miked2332 said:
Try flashing in TWRP.
Click to expand...
Click to collapse
working with magisk v 18.1 without problems
Latest Canary working also.
Google always tries to disable the root
@pepins: It's not that Google always tries to disable root, Play Protect always tries to disable the Material Design version of the V4A app.
@Switch Blade: When you tried updating it hung for a while on the prompt to update, then it threw up a message to reboot? After rebooting, did it prompt to install the driver again? I encountered that and it's probably a bug in the install script for the module. You need to head to the Magisk thread for the module and bring this up. That said, installing through TWRP, as recommended in the first reply to your post, is the way to go here.
Strephon Alkhalikoi said:
@pepins: It's not that Google always tries to disable root, Play Protect always tries to disable the Material Design version of the V4A app.
@Switch Blade: When you tried updating it hung for a while on the prompt to update, then it threw up a message to reboot? After rebooting, did it prompt to install the driver again? I encountered that and it's probably a bug in the install script for the module. You need to head to the Magisk thread for the module and bring this up. That said, installing through TWRP, as recommended in the first reply to your post, is the way to go here.
Click to expand...
Click to collapse
I get the update driver everytime on first install when if I have reset phone or reinstall Magisk and have to use recovery. After that I can update or reinstall in Magisk.
Sent from my Pixel 2 XL using XDA Labs
miked2332 said:
Try flashing in TWRP.
Click to expand...
Click to collapse
Tried flashing from TWRP - same issue, upon openning Viper4android app, tells me the driver isn't installed - then fails on IO.
Weird
Check Magisk see if viper is in SU. If not Go-to viper app info clear data and turn storage off. Sometimes this make Magisk ask for SU for viper. Makes it work sometimes.
I had to use this method for a while to get it to work. Also I have musicfx disabled in apps. Had to do that on my Nexus 6 and just kept on doing it. Uninstall Viper reboot.
Install Viperfx don't reboot
Install audio modification reboot.
It can be done in TWRP also. If you reflash either of those a second time it uninstalls them if you didn't know.
I'm not a developer I pretty much just mess with these things until they work for me.
Sent from my Pixel 2 XL using XDA Labs
miked2332 said:
I get the update driver everytime on first install when if I have reset phone or reinstall Magisk and have to use recovery. After that I can update or reinstall in Magisk.
Click to expand...
Click to collapse
Of the three devices I installed V4A on the P2XL was the only one to have an issue. Normally it's not an issue, so what changed this time I don't know. Anyway, the other two devices, a Moto X Pure and a Galaxy S4, installed the driver through Magisk without difficulty. As mentioned, flashing V4A in TWRP on the P2XL resolved things.
Strephon Alkhalikoi said:
Of the three devices I installed V4A on the P2XL was the only one to have an issue. Normally it's not an issue, so what changed this time I don't know. Anyway, the other two devices, a Moto X Pure and a Galaxy S4, installed the driver through Magisk without difficulty. As mentioned, flashing V4A in TWRP on the P2XL resolved things.
Click to expand...
Click to collapse
I tried just installing opposite features today didn't work. On my phone it goes 2.5.0.5. Old Style, System App, and after the update I have to choose no on the last. It's my 1 reason for using root.
Sent from my Pixel 2 XL using XDA Labs
Try SeLinux Permissive apk
This happens every now and then for me; especially if I'm updating V4A after being on an older version for a long time...
I've forgotten where I've seen/read it, but many times you can't simply update it and/or install the driver from the app. What I end up doing (forced to do) is to uninstall the app (from within Magisk), reboot, and re-download/re-install it (searching for module from within Magisk app) and it should (usually) install the driver again...I usually install it by selecting the 2.5.0.5 and "material" version and as a "system app"...
I dunno why...but this seems to do the trick, but I have to do it frequently now and then...
I use Magisk module that works for speakers, but not with headset.It happens only to me?
miked2332 said:
Check Magisk see if viper is in SU. If not Go-to viper app info clear data and turn storage off. Sometimes this make Magisk ask for SU for viper. Makes it work sometimes.
I had to use this method for a while to get it to work. Also I have musicfx disabled in apps. Had to do that on my Nexus 6 and just kept on doing it. Uninstall Viper reboot.
Install Viperfx don't reboot
Install audio modification reboot.
It can be done in TWRP also. If you reflash either of those a second time it uninstalls them if you didn't know.
I'm not a developer I pretty much just mess with these things until they work for me.
Sent from my Pixel 2 XL using XDA Labs
Click to expand...
Click to collapse
These steps allowed me to install the driver!!!! Thank you!
Installed fine for me. Using Magisk 18.1 though.
Here are more instructions (if some continue to have problems) and a Viper profile for XDA members to try out. Works very well to make the phone speakers sound good.
https://forum.xda-developers.com/pixel-2-xl/how-to/viper4android-pixel-2-xl-stereo-speaker-t3919285
I've been trying to get viper4android working on Android q for quite some time but the module and the app itself does not want work at all. Plus when viper asks you to install the driver from the app it will end up in a bootloop. Has anybody found a temp workround for it?
Device: Pixel 2 XL Android version: Q Beta 3
I'm having a similar issue, only the driver install is asked again upon reboot ;_;
Thats only why i rollback from Q.
Total**** sound without
Ok, got it working on beta 3, using the apk 2.7.1.0 from XDA. It appears to install as a magisk module, along with AML. It didn't work on my first try, then all was good. I need to run it in compatibility mode from the menu. https://labs.xda-developers.com/store/app/com.pittvandewitt.viperfx
In android P what version did you use?
Always used the magisk repo version before- I tried this many times on Q, with and without AML, but always got the dreaded install driver dialogue. Also tried SE Linux permissive, but no luck. I've never used the apk before, but am sat here now listening to music quite happily. It's survived a couple of reboots (just checking).
1959best said:
Ok, got it working on beta 3, using the apk 2.7.1.0 from XDA. It appears to install as a magisk module, along with AML. It didn't work on my first try, then all was good. I need to run it in compatibility mode from the menu. https://labs.xda-developers.com/store/app/com.pittvandewitt.viperfx
Click to expand...
Click to collapse
Hm, I just tried that. I downloaded the one off XDA LABS and checked compatibility mode on the app. Still showing up as driver not installed. Viper4Android is literally the key element for my phones such a good module.
Try another reboot?
Knxed_ said:
Hm, I just tried that. I downloaded the one off XDA LABS and checked compatibility mode on the app. Still showing up as driver not installed. Viper4Android is literally the key element for my phones such a good module.
Click to expand...
Click to collapse
I just upgraded to Android 10 on my Pixel 2XL and have Viper running now. Download stable 2.7.1.0 from XDA Labs, grant root with Magisk. Check compatibility mode THEN install the driver. Restart, make changes, and then be sure to check "Attach audio effects" in settings once you make your changes.
ifellouttabed said:
I just upgraded to Android 10 on my Pixel 2XL and have Viper running now. Download stable 2.7.1.0 from XDA Labs, grant root with Magisk. Check compatibility mode THEN install the driver. Restart, make changes, and then be sure to check "Attach audio effects" in settings once you make your changes.
Click to expand...
Click to collapse
Mhh doesn't work for me this way.still asking for driver after reboot lol
Thanks. Worked for me on second try. Followed the instructions rebooted didn't work, installed drivers again rebooted and then it worked.
pa.pn2 said:
Mhh doesn't work for me this way.still asking for driver after reboot lol
Click to expand...
Click to collapse
Same here sadly...
sidhaarthm said:
Same here sadly...
Click to expand...
Click to collapse
Ok, here's what you gotta do to get it to work, this is the ONLY method I've had consistently work for me from beta 3-public release(did it an hour ago and worked perfectly)
First, uninstall any viper you have also make sure you completely uninstall audio modification library if you have it installed, not disable, uninstall it and reboot after uninstalling what I've listed.
After you're all booted back up, install viper from labs (link in this thread)(Also, forget about compatibility mode, don't use it) now open viper but do NOT install the driver yet, just open the application then go to magisk and install audio modification library but dont let magisk reboot the phone after it installs. Once installation completed, go back to viper and install the driver and let it reboot. Once booted, go straight to magisk and DISABLE audio modification library (uncheck the box next to it if you dont get what I mean) don't uninstall it. After disabling AML head back to viper and install the driver again. Now once rebooted is the moment of truth, if you open viper and its installed you're obviously done but if it's not installed you have to take this next step: don't install the driver just yet, go to magisk and re-enable AML then back to viper and install the driver. I don't see why this would not work for you guys, I know this isn't the easiest tutorial to follow but make sure you follow it to a T, if you mess any step up you need to start from scratch and uninstall both AML and viper and start again.
Good luck guys and may the audiophile Gods be on your side through this process!
1dopewrx05 said:
Ok, here's what you gotta do to get it to work, this is the ONLY method I've had consistently work for me from beta 3-public release(did it an hour ago and worked perfectly)
First, uninstall any viper you have also make sure you completely uninstall audio modification library if you have it installed, not disable, uninstall it and reboot after uninstalling what I've listed.
After you're all booted back up, install viper from labs (link in this thread)(Also, forget about compatibility mode, don't use it) now open viper but do NOT install the driver yet, just open the application then go to magisk and install audio modification library but dont let magisk reboot the phone after it installs. Once installation completed, go back to viper and install the driver and let it reboot. Once booted, go straight to magisk and DISABLE audio modification library (uncheck the box next to it if you dont get what I mean) don't uninstall it. After disabling AML head back to viper and install the driver again. Now once rebooted is the moment of truth, if you open viper and its installed you're obviously done but if it's not installed you have to take this next step: don't install the driver just yet, go to magisk and re-enable AML then back to viper and install the driver. I don't see why this would not work for you guys, I know this isn't the easiest tutorial to follow but make sure you follow it to a T, if you mess any step up you need to start from scratch and uninstall both AML and viper and start again.
Good luck guys and may the audiophile Gods be on your side through this process!
Click to expand...
Click to collapse
Take a bow good sir, it worked! Had to follow the steps to the end as first time around it didn't work. Now seems to be alright (see attached)
For anyone else wondering, I upgraded from Aug 9.0 build to Q (020) last night by flashing the factory ROM without wipe. Rooted, ads disabled and now ViperFX working. Life is goooood :angel:
sidhaarthm said:
Take a bow good sir, it worked! Had to follow the steps to the end as first time around it didn't work. Now seems to be alright (see attached)
For anyone else wondering, I upgraded from Aug 9.0 build to Q (020) last night by flashing the factory ROM without wipe. Rooted, ads disabled and now ViperFX working. Life is goooood :angel:
Click to expand...
Click to collapse
I think it also worked for me now but in your screeny it says not enabled.same with me.
But i have all the options for speaker headphones usb etc.think it worked
pa.pn2 said:
I think it also worked for me now but in your screeny it says not enabled.same with me.
But i have all the options for speaker headphones usb etc.think it worked
Click to expand...
Click to collapse
Ah yeah, it's probably because I hadn't enabled it until that time. Here's a fresh screenie
sidhaarthm said:
Ah yeah, it's probably because I hadn't enabled it until that time. Here's a fresh screenie
Click to expand...
Click to collapse
what do you mean with didnt enable it?
i did all the steps, i can adjust all settings but if i play something in g music it still says not enabled....what did i miss?
pa.pn2 said:
what do you mean with didnt enable it?
i did all the steps, i can adjust all settings but if i play something in g music it still says not enabled....what did i miss?
Click to expand...
Click to collapse
By enabling, I meant turning on the master limiter and other settings. I adjusted mine with a nice YouTube track playing in the background and it all worked a treat. Yet to do my Bluetooth earphones though
sidhaarthm said:
By enabling, I meant turning on the master limiter and other settings. I adjusted mine with a nice YouTube track playing in the background and it all worked a treat. Yet to do my Bluetooth earphones though
Click to expand...
Click to collapse
I switched on the master and now its working.awesome find
@1dopewrx05 I followed your mini tutorial to a T and it worked perfectly. Thank you for taking the time to do this, I really appreciate it. Just updated my old faithful to 10 earlier and gonna mess around with some of the neat features. I can't live without Viper, it's essential to me.
Developer Preview is up if anybody wants to try it
Factory Images for Nexus and Pixel Devices | Google Play services | Google for Developers
developer.android.com
Holy Moly.
Side loaded OTA via ADB all works fine no issues so far no FC can't say much difference
DoobyDroid said:
Side loaded OTA via ADB all works fine no issues so far no FC can't say much difference
Click to expand...
Click to collapse
Seems like for now, most UI and user facing changes in general are hidden behind flags, this one is meant for the devs, so it's to be expected. The beta, on the other end, will be aimed at users, and then we will see what changes
I upgraded last night. Had to reboot twice after restart. Then everything was stable. First time it rebooted after install, nothing seemed to want to work and kept FCing. Second reboot, everything is fine now. Sometimes, Nova needs to be indicated when I press the home button that it's default, otherwise, everything is working fine.
Is it me or does the Android version still say 11 but the build is "S"?
I downloaded the 12 DP1... and it just isn't ready yet (understandably so) for the daily driver use I need.f
Rooting it requires disable verity and verification. You'll need magisk 23 or canary to patch boot.img as well. Not disabling verity/verification, it will only boot back into fastboot and list the reason as something like, "unable to load boot image".
Once rooted, I moved on to installing edxposed --- using riru, riru edxposed, and edxposed manager. Everything installs without problems. Final reboot, and reboots as normal. But then about 90 seconds later, you'll start getting FC after FC after FC. All apps too, and background apps, and systemui, etc.
Removing the riru components and edxposed manager, doesn't correct this problem.
Did fresh format and reinstall of the DP1... rooted again... and then tried Viper4Android. I use a very simple version. You just flash it, and its done (no manual driver install either). Rather than the 3 reboot, AML, driver install, etc.
V4A installs with good logs. Reboots without a hitch. But I noticed the v4a icon in the status bar is missing. I open it up manually, and start getting freezes and fc's. Within 5 minutes, I get kernel panic reboots -- and non-bootloop freezes on the working G screen.
Reboot manually with long press power, get it loaded back up and immediately remove V4A. Reboot and now I'm back to stock.
Get FC's every hour or two. Random reboots too. Battery life is struggling.
I decided to wait until a better version drops, perhaps the beta or at least a DP2.5 or 3.0. As of right now, having Android S is mostly just a status thing -- to show people how cool we are to have access to it as such an early stage. But unless you are dedicated to helping improve the ROM through daily use and reporting... I highly recommend that you stick with Android R.
Just flashed the 1st public android 12 beta bramble-ota-spb1.210331.013-3c294b13.zip with adb sideload. Listed as android S atm, surprised 5G was enabled as this wasn`t the case with android 11 in the Netherlands. All apps working fine so far and still finding out the new stuff.
Has anyone been able to root the Pixel 4a 5G with Android 12 Beta 1?.
Kindly share the steps.
ekowwillis said:
Has anyone been able to root the Pixel 4a 5G with Android 12 Beta 1?.
Kindly share the steps.
Click to expand...
Click to collapse
yep i also like to know..tried twice but ended up in fastboot mode and cant get it to boot.i used the old magisk patched method but i probebly missing something
galza said:
yep i also like to know..tried twice but ended up in fastboot mode and cant get it to boot.i used the old magisk patched method but i probebly missing something
Click to expand...
Click to collapse
Clean wipe and follow the OP instructions in this Pixel 5 thread. Make sure you use the images for 4a5g where needed
[Guide] Flash Magisk on Android 12
Trying to root the Pixel 5 running Android 12 by flashing a magisk-patched boot image results in the phone only booting to fastboot mode ("failed to load/verify boot images") Some users have reported that booting (instead of flashing) the patched...
forum.xda-developers.com