Edit: clean install of LOS for microG and couldn't even get signal messenger to register. Never received a text with a code and never received the phone all. Switched back to opengapps for now.
I have a galaxy S5 sm-G900P (sprint) device running LineageOS for MicroG Kltedv may 25th 2018 build. Full device encryption is enabled. The device is running the latest firmware from OTA updates from sprint.
For about a month now, my push notifications for protonmail and signal messenger don't seem to come through unless I open the app and then I get hammered with them. These are the only two apps I allow to have GCM push notifications and Google registration enabled.
I tried making both of these ignore android battery optimizations, and I've tried over riding the notification priority for both apps to the highest setting. I've tried using the websockets version of signal and it didn't seem to help. I've reinstalled the apps a few times and that doesn't help either. I install apps via yalp store.
My wife has the exact same phone, with updated firmware, full encryption, except she's using Pico opengapps, and she does NOT have this problem with signal. So it seems to me it's something to do with microG.
Has anyone had this issue or does anyone have some suggestions for me to try?
Boggle247 said:
I have a galaxy S5 sm-G900P (sprint) device running LineageOS for MicroG Kltedv may 25th 2018 build...
Click to expand...
Click to collapse
I don't use the MicroG but, you may be able to obtain some feedback regarding it within one of the following MicroG threads.
https://forum.xda-developers.com/showthread.php?t=3217616
https://forum.xda-developers.com/showthread.php?t=3432360
The following is the Official LineageOS 14.1 thread that's specific to your device and variants.
https://forum.xda-developers.com/showthread.php?t=3476433
If all else fails, and you don't receive any responses from any of the above threads, then your next best bet is to post your question within the following Q&A thread that's specific to the klte device variants.
https://forum.xda-developers.com/showthread.php?t=2700073
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Boggle247 said:
I have a galaxy S5 sm-G900P (sprint) device running LineageOS for MicroG Kltedv may 25th 2018 build. Full device encryption is enabled. The device is running the latest firmware from OTA updates from sprint.
For about a month now, my push notifications for protonmail and signal messenger don't seem to come through unless I open the app and then I get hammered with them. These are the only two apps I allow to have GCM push notifications and Google registration enabled.
I tried making both of these ignore android battery optimizations, and I've tried over riding the notification priority for both apps to the highest setting. I've tried using the websockets version of signal and it didn't seem to help. I've reinstalled the apps a few times and that doesn't help either. I install apps via yalp store.
My wife has the exact same phone, with updated firmware, full encryption, except she's using Pico opengapps, and she does NOT have this problem with signal. So it seems to me it's something to do with microG.
Has anyone had this issue or does anyone have some suggestions for me to try?
Click to expand...
Click to collapse
Is device registration enabled in microG settings?
kurtn said:
Is device registration enabled in microG settings?
Click to expand...
Click to collapse
Yes. I abandoned micro. Tried a clean install and I couldn't even register signal app.
PUSH notifications on LOS 15.1 Official
Hey, guys.
I asked the same question in my device thread, but not sure it is device specific.
Does anybody experience any issues with Push notifications?
After LOS 15.1 clean install (+OpenGApps Micro) I completely lost all notifications from everything.
I know that our devices are not certified for Play Market, so I followed instructions here: https://www.google.com/android/uncertified/
Added my GSF ID. But I see the following items in logcat.
Also, Google Play says that "Device is not certified".
I tried to clear Dalvik cache, cache partition, re-logged into my Google Account.
But no luck.
What's wrong?
RISING-STAR said:
Hey, guys.
I asked the same question in my device thread, but not sure it is device specific.
Does anybody experience any issues with Push notifications?
After LOS 15.1 clean install (+OpenGApps Micro) I completely lost all notifications from everything.
I know that our devices are not certified for Play Market, so I followed instructions here: <link removed>
Added my GSF ID. But I see the following items in logcat.
<link removed>
Also, Google Play says that "Device is not certified".
<link removed>
I tried to clear Dalvik cache, cache partition, re-logged into my Google Account.
But no luck.
What's wrong?
Click to expand...
Click to collapse
I have the same problem (identical logs) and no working push notifications immediately after I upgraded from LineageOS 14.1 to 15.1 on LG G2 D802. Both running a matching OpenGApps package.
I registered GSFA ID for my Google account and my device is marked as certified in Google Play. I upgraded to the latest nightlies of LineageOS 15.1 and OpenGApps, wiped caches, wiped Google Play Services storage.
Push notifications are still not working from me, though.
emkejovich said:
I have the same problem (identical logs) and no working push notifications immediately after I upgraded from LineageOS 14.1 to 15.1 on LG G2 D802. Both running a matching OpenGApps package.
I registered GSFA ID for my Google account and my device is marked as certified in Google Play. I upgraded to the latest nightlies of LineageOS 15.1 and OpenGApps, wiped caches, wiped Google Play Services storage.
Push notifications are still not working from me, though.
Click to expand...
Click to collapse
See my other messages below. You have to clean up the cache of a couple Google services.
Related
I have installed Lineage 15.1 and the recommended Gapps arm-64bit / stock. I fully reset the phone and previously deleted the system in TWRP. Before that I had installed the current open beta. So bootloader and modem are up to date.
Whether I install the GAPPS right with the ROM or the ROM first and then the GAPPS after a reboot, I can't set up a Google Account.
As soon as I start a Google App it hails error messages. "Google Play Services stopped"
I tried it three times and installed a smaller GAPPS version, but I'm stuck. Since the Google Play service has not yet been set up, there is also no data to delete.
Translated with www.DeepL.com/Translator
bitboy0 said:
I have installed Lineage 15.1 and the recommended Gapps arm-64bit/stock...
Click to expand...
Click to collapse
This looks like an OpenGApps specific question and, if so, your best bet is to post this question within the following Official Q&A thread that's specific to OpenGApps.
https://forum.xda-developers.com/showthread.php?t=3098071
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
How to get past, "This apk is split. Use root or privileged installation method."
I get that error messages now and again when installing some apks from alternate stores (Yalp, Aptoid, Racoon, etc.). Why and how can I get beyond this?
I do not run any GApps on my device, and I do not have any of the play services framework installed.
I've been able to pull the apk from another source at times, install it, and then update it from the other apk repository store without issue. I'm stuck with one apk right now; however, that I cannot install.
edit: The particular apk I was working on I found a workaround. On a different repository I was able to identify an older version that was not split. However, I still cannot update the app due to the split structure.
i have the same , for the app "Twitter" . Has it ever been solved
Apk is split
Hello!
I too have problem with "apk is split".
I find it strange that this became a problem with few apps all of the sudden - with apps that I have been using for a year and never had problems to download from Yalp.
What changed? Is this problem somehow conected with Lineages OS, or with Yalp, or google trying to make it hard for lineage users to use it, or is this just problem with app? If so, why is that?
If no luck with yalp store or other repositories is it safe to download apk file from sites that browser finds them like appsapk.com or apkspure.com etc...
Or is there any other way? To re-split them?
Thank you for help and greetings !
I am using Lineage 15.1 microg on Mido (Redmi note 4). Tried the same on official Lineage OS 15.1 and also with open gapps. Seems like it makes no difference.
https://github.com/Aefyr/SAI/releases/download/1.15/SAI-1.15.apk
Sent from my POCOPHONE F1 using Tapatalk
blizard80 said:
https://github.com/Aefyr/SAI/releases/download/1.15/SAI-1.15.apk
Sent from my POCOPHONE F1 using Tapatalk
Click to expand...
Click to collapse
What is this?
Hi,
To begin, please excuse me for my English, and as I'm a novice, please excuse me too if this post isn't in the category that it has to.
So I recently reset my phone (Honor 5X) and I flashed Lineage OS, without OpenGApps. But I noticed that all applications that require Google Services (Bank Apps, or Snapchat) do not works. So, I installed MicroG on my device, but it still doesn't work.
I heard about LineageOS for microG, and I flashed this OS yesterday. Each cross of self-verifying is complete in MicroG, but SafetyNet Test fails.
I heard about Droid Guard and a modification about it but I don't understand what.
Thanks to answer me!
SkyLoon said:
Hi,
To begin, please excuse me for my English, and as I'm a novice, please excuse me too if this post isn't in the category that it has to.
So I recently reset my phone (Honor 5X) and I flashed Lineage OS, without OpenGApps. But I noticed that all applications that require Google Services (Bank Apps, or Snapchat) do not works. So, I installed MicroG on my device, but it still doesn't work.
I heard about LineageOS for microG, and I flashed this OS yesterday. Each cross of self-verifying is complete in MicroG, but SafetyNet Test fails.
I heard about Droid Guard and a modification about it but I don't understand what.
Thanks to answer me!
Click to expand...
Click to collapse
I don't use apps that need safety net. But i watch this drama quite a while now. If I ever was forced to use those apps, i probably would run them on a second phone with stock ROM and locked bootloader. Btw.: with two phones you can do a real 2FA for banking.
even some rom advertise about supporting "signature spoofing"... I've same issue, so I found the "Smali Patcher" that explicitly patch system to support "signature spoofing" as real.
https://forum.xda-developers.com/apps/magisk/module-smali-patcher-0-7-t3680053
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What's not working:
IMS (no volte)
Bixby button currently not set
Instructions:
Make sure twrp by afaneh92 is installed and functional.
Download the latest build (and optionally gapps).
Reboot to recovery
Wipe system, data, and cache (required if you switch from other ROMs)
Flash the latest build, gapps, and magisk.
Reboot
Downloads:
Galaxy S10 Snapdragon (G973U): https://github.com/klabit87/OTA/rel...eage-17.1-20201114-UNOFFICIAL-beyond1qlte.zip
Google Apps: https://opengapps.org/
Reporting Bugs:
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred.
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless).
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. For now please report any bug below.
Group:
Join this group for contacting me and bug reporting (typically fast response )
Unlocked Samsung US devices
https://t.me/joinchat/CG3Ojlb0TwDDrN-RY5UqmQ
Also dont forget to hit the thanks button!
Contributors
Thanks to @jrkruse and @afaneh92 for testing initial builds.
ROM Firmware Required: Minimum of Android 10 firmware
Based On: LineageOS
Version Information
Status: Beta
Source:
https://github.com/klabit87/android_device_samsung_beyond1qlte
https://github.com/klabit87/android_device_samsung_sm8150-common
https://github.com/klabit87/android_kernel_samsung_sm8150-common
https://github.com/klabit87/android_vendor_samsung_sm8150-common
Created 2020-11-14
Last Updated 2020-11-14
Reserved
Got it installed. Haven't had a chance to use as a daily driver, since I use volte. Hope it gets working eventually! Would definitely love to use as a daily driver after that!
Same. would love to see volte.
illspiritX said:
Same. would love to see volte.
Click to expand...
Click to collapse
I also had issuess with GPS on the sm-g973u, but that's something I testing with op, when he gets a new build made
Hi. I'm new here and I need some information. Do the fingerprint sensor and all the cameras work for this custom rom?
I am trying to root Lineage 18.1 on my S10.
Tried differtent versions of magisk without result. Is there a guid available for Lineage 18.1 for Galaxy s10?
pitchdown said:
I am trying to root Lineage 18.1 on my S10.
Tried differtent versions of magisk without result. Is there a guid available for Lineage 18.1 for Galaxy s10?
Click to expand...
Click to collapse
I've been working on a beta for s10. I'm hoping to share it this week. I planned to publish last week but I got busy with work.
klabit87 said:
I've been working on a beta for s10. I'm hoping to share it this week. I planned to publish last week but I got busy with work.
Click to expand...
Click to collapse
what will be shared?
Is it on a s10 not possible yet?
pitchdown said:
what will be shared?
Is it on a s10 not possible yet?
Click to expand...
Click to collapse
I have been working on a lineage 18.1 build for s10. Just be patient.
Will 18.0 qork
klabit87 said:
I have been working on a lineage 18.1 build for s10. Just be patient.
Click to expand...
Click to collapse
Will 18.0 work with Magisk?
I don't see why not. I haven't tested that yet though
klabit87 said:
I don't see why not. I haven't tested that yet though
Click to expand...
Click to collapse
until now magisk isn`t installed after flashing with 18.1
I hope your new version will have a help to this.
I am using 18.1 with magisk and have root and everything, my only issue with this rom is several of the google play apps i use won't even install on it saying it is incompatible, but they worked fine on stock. I do like the theme though and the personalization, great job! Just need to make it more compatible and i would love it.
Replicatorz said:
I am using 18.1 with magisk and have root and everything, my only issue with this rom is several of the google play apps i use won't even install on it saying it is incompatible, but they worked fine on stock. I do like the theme though and the personalization, great job! Just need to make it more compatible and i would love it.
Click to expand...
Click to collapse
You have to use the Magisk Hide option, and select everything with "com.google" in the package name.
Does this work with G9730 Chinese / Hong kong snapdragon variant?
Just got so sick of OneUI crashing all the time so I thought I'd give this a whirl. All good so far except for Google Maps can't seem to properly display. All the elements get huge when Maps is active, including the phone interface itself. Switching to any other app returns the normal look. I have googled as many different search terms as I could think of to see if anyone else is having this issue but I have come up with nothing. Screengrabs attached.
Google Photos has a similar issue only it just crashes after some screen difficulty.
BWhitmore said:
Just got so sick of OneUI crashing all the time so I thought I'd give this a whirl. All good so far except for Google Maps can't seem to properly display. All the elements get huge when Maps is active, including the phone interface itself. Switching to any other app returns the normal look. I have googled as many different search terms as I could think of to see if anyone else is having this issue but I have come up with nothing. Screengrabs attached.
Google Photos has a similar issue only it just crashes after some screen difficulty.
Click to expand...
Click to collapse
I encountered the same problem for Google Map when I'm in battery save mode.
Can i install this rom via TWRP? I cant see Install Lineageos Rom via TWRP guide. Thanks!
aceqdl0925 said:
Can i install this rom via TWRP? I cant see Install Lineageos Rom via TWRP guide. Thanks!
Click to expand...
Click to collapse
Yes, it's just like how you flash every other ROM. Check this.
I have been running Lineage Is 17.1 with MicroG for a week and its amazing
I don't have GAPPS, but strava needs Google maps, so I have installed that...
The App starts up on the log in page, and after I enter my details it just loops never logging in ?
I have given the app every permission available.
Any advice appreciated
Hi, exact same problem for me. It would be great to read some solutions.
I am experiencing this as well. Hope we can find a fix for this.
Things I've tried...
Downloaded multiple older versions of both google maps and strava, I get to the point where I get a message saying to update microg, which I attempt and get an error saying 'conflicting packages'...
I've bit the bullet and logged in an old google account and still nothing...
It's as if the app hangs at the recaptcha stage of the log in process...
I got it working now.
My Device is a Galaxy S10 (beyond1lte) with Lineageos 18.1 for microg installed.
On microg I enabled "Cloud Messaging" for Strava.
That's it!
(..no Google Maps, nothing)
rabbit-ng said:
I got it working now.
My Device is a Galaxy S10 (beyond1lte) with Lineageos 18.1 for microg installed.
On microg I enabled "Cloud Messaging" for Strava.
That's it!
(..no Google Maps, nothing)
Click to expand...
Click to collapse
Good news...
Do you have signature spoofing enabled? I haven't worked that out on lineage 18.1...
I still use 17.1 with signature spoofing and this still doesn't work with cloud messaging
The following link helped me. https://plexus.techlore.tech/applications/strava/
So I activated SafetyNet in the microg settings and although the certification fails, "Test ReCAPTCHA" works and so does the login to Strava.
ROM is freshly installed https://download.lineage.microg.org/sunfish/lineage-18.1-20220321-microG-sunfish.zip
Hope it helps.