Develop Bugs

Is it possible to root the T-Mobile XT1789-04?????

I've been trying to root and install Lineage 16.0 on my Z2 force TMO XT1789-04 for a few weeks now.
I was able to unlock the bootloader on Motorola's website no problem.
The phone has been updated to OCXS 27.1.7.
When I run getprop ro.bootloader, MBM-3.0-nash_tmo-1f35305-190705 is my result. This didn't verify if my bootloader was OCSX, so I ran the getvar all command in fastboot, and the output said I was running MBM-3.0-nash_tmo-1f35305-190705 in slot _b. I will post all the info at the end of the post.
Earlier I made the mistake of moving ahead to set the bootloader partition to slot _a. Luckilly I didn't brick my phone. I used the following commands with no luck .
fastboot set_active other
fastboot set_active a
fastboot –set-active=_aslot
fastboot –set-active=_a
What am I doing wrong? Should I give up? I'd rather sell my phone than brick it.
If someone could point me in the right direction I'd appreciate it!!!.
Thanks!
fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-nash_tmo-1f35305-190705
(bootloader) product: nash
(bootloader) board: nash
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: NA_UMTS
(bootloader) storage-type: UFS
(bootloader) emmc: N/A
(bootloader) ufs: 64GB SAMSUNG KLUCG4J1ED-B0C1 FV=0200
(bootloader) ram: 4GB SKHYNIX LP4x DIE=16Gb M5=06 M6=04 M7=00 M8=11
(bootloader) cpu: MSM8998 2.1 (0)
(bootloader) serialno: ZY224B9BP4
(bootloader) cid: 0x0015
(bootloader) channelid: 0x85
(bootloader) uid: 14905111
(bootloader) securestate: flashing_unlocked
(bootloader) verity-state: logging (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: ****(deleted)
(bootloader) meid:
(bootloader) date: 07-26-2017
(bootloader) sku: XT1789-04
(bootloader) carrier_sku:
(bootloader) battid: SNN5987A
(bootloader) battery-voltage: 4379
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/nash_tmo_c/nash:8.0.0/OCX
(bootloader) ro.build.fingerprint[1]: S27.109-51-14-7/12:user/release-ke
(bootloader) ro.build.fingerprint[2]: ys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.351.12.nash_tmo_c
(bootloader) ro.build.version.full[1]: .tmo.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.4.r1-04300-8x98.0
(bootloader) version-baseband: M8998TMO_20207.117.02.41.08R NUS
(bootloader) kernel.version[0]: Linux version 4.4.78-perf-g5b6c26aa-0177
(bootloader) kernel.version[1]: 2-g1e9c9a2 ([email protected]) (gcc ver
(bootloader) kernel.version[2]: sion 4.9.x 20150123 (prerelease) (GCC) )
(bootloader) kernel.version[3]: #1 SMP PREEMPT Fri Jul 5 12:49:00 CDT 2
(bootloader) kernel.version[4]: 019
(bootloader) git:abl: MBM-3.0-nash_tmo-1f35305-190705
(bootloader) git:xbl: MBM-3.0-nash_tmo-9869834-190705
(bootloader) gitmic: MBM-3.0-nash_tmo-9869834-190705
(bootloader) git:rpm: MBM-3.0-nash_tmo-b13e14f-190705
(bootloader) git:tz: MBM-3.0-nash_tmo-1bc18bf-190705
(bootloader) git:hyp: MBM-3.0-nash_tmo-1bc18bf-190705
(bootloader) git:devcfg: MBM-3.0-nash_tmo-1bc18bf-190705
(bootloader) git:cmnlib: MBM-3.0-nash_tmo-1bc18bf-190705
(bootloader) git:cmnlib64: MBM-3.0-nash_tmo-1bc18bf-190705
(bootloader) git:keymaster: MBM-3.0-nash_tmo-1bc18bf-190705
(bootloader) git:storsec: MBM-3.0-nash_tmo-1bc18bf-190705
(bootloader) gitrov: MBM-3.0-nash_tmo-1bc18bf-190705
(bootloader) qe: "qe 0/0"
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: tmo
(bootloader) current-slot: _b
(bootloader) running-bl-slot: _b/_b
(bootloader) running-boot-lun: 3
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: yes
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 6

Why do u have to do all of this to just install lineage 16?
I'm on T-Mobile too and I just simply:
1- fastboot flashed the pre-los zip
2- follow the normal procedure for flashing Los (although it took time to find the right twrp version actually working, many didn't flashed successfully) + magisk for root
3- mind my tmo Z2 force was already on Oreo...

Use twrp 3.3.0.0.img to flash with, I wouldn't worry about installing twrp since the updater uses Los recovery. If you must insstall twrp 3.3.1.0.zip is solid I believe. Not sure why 3..3.0.0.zip isn't there, but I have the zip if needed.

I tried to install TWRP 3.3.0-0 using fastboot flash boot (path to) twrp.img
I wasn't able to get TWRP installed. Am I using the wrong commands or twrp image?

Google_is_Watching said:
I tried to install TWRP 3.3.0-0 using fastboot flash boot (path to) twrp.img
I wasn't able to get TWRP installed. Am I using the wrong commands or twrp image?
Click to expand...
Click to collapse
You'll need to run fastboot boot twrp.img once it boots to TWRP you can use the install option within TWRP to install the twrp.zip file

rcmaehl said:
You'll need to run fastboot boot twrp.img once it boots to TWRP you can use the install option within TWRP to install the twrp.zip file
Click to expand...
Click to collapse
It worked!!! I feel dumb but grateful. Thank you!

Moto G8 Play Stuck On Fastboot (No Bootable A/B Slot)

Sorry if I have some grammar errors, English is not my main language
OK so Recently I bought this phone from a friend thinking it was an easy fix by just flashing a rom but I couldn't find a way to make it work.
I've tried many way on how to fix, via LMSA and from ADB but got no luck.
The rom I use is the one who LMSA gave me:
LIMA_32_AMX_PMD29.70-81_subsidy-DEFAULT_regulatory-XT2015_2L_CFC
This is what the command ¨fastboot getvar all¨ trows at me:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-lima_32_retail-210600d2e-200306
(bootloader) product: lima
(bootloader) board: lima
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: 2
(bootloader) storage-type: eMMC
(bootloader) emmc: 32GB SAMSUNG 4X6KMB RV=08 PV=00 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP4x DIE=16Gb M5=01 M6=07 M7=00 M8=12
(bootloader) cpu: MT6771V/WL
(bootloader) serialno: ZY326VQQK5
(bootloader) cid: 0x0032
(bootloader) channelid: 0x08
(bootloader) uid: F60944C9BFC7792F000000000000
(bootloader) securestate: oem_locked
(bootloader) factory-modes: disabled
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 268435456
(bootloader) reason: No bootable A/B slot
(bootloader) meid:
(bootloader) date: 10-28-2019
(bootloader) sku: XT2015-2
(bootloader) carrier_sku: XT2015-2
(bootloader) battid: SB18C51711
(bootloader) iccid:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Tue May 12 2:10:26 UTC 2020"
(bootloader) ro.build.fingerprint[0]: motorola/lima_32_amx/lima:9/PMD29.
(bootloader) ro.build.fingerprint[1]: 70-81/cb27e:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.51.97.lima_32_amx
(bootloader) ro.build.version.full[1]: .amx.en.US
(bootloader) ro.build.version.mtk: alps-mp-p0.mp1.tc2sp-V1.47
(bootloader) version-baseband: MT6771_V16.03.01.90R
(bootloader) kernel.version[0]: Linux version 4.4.146+ ([email protected]
(bootloader) kernel.version[1]: 171) (gcc version 4.9.x 20150123 (prerel
(bootloader) kernel.version[2]: ease) (GCC) ) #1 SMP PREEMPT Fri Mar 6 0
(bootloader) kernel.version[3]: 9:15:39 CST 2020
(bootloader) frp-state: protected (210)
(bootloader) ro.carrier: amxco
(bootloader) current-slot: a
(bootloader) running-boot-lun: 0
(bootloader) running-slot: _a
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-bootable:_a: no
(bootloader) slot-bootable:_b: no
(bootloader) slot-retry-count:_a: 0
(bootloader) slot-retry-count:_b: 0
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) pcb-part-no: SB28C70228
And this is the ADB command that i use before
Code:
fastboot flash gpt PGPT
fastboot flash preloader preloader.bin
fastboot flash lk_a lk.img
fastboot flash tee_a tee.img
fastboot flash md1img_a md1img.img
fastboot flash spmfw_a spmfw.img
fastboot flash scp_a scp.img
fastboot flash sspm_a sspm.img
fastboot flash cam_vpu1_a cam_vpu1.img
fastboot flash cam_vpu2_a cam_vpu2.img
fastboot flash cam_vpu3_a cam_vpu3.img
fastboot flash vbmeta_a vbmeta.img
fastboot flash oem_a oem.img
fastboot flash logo_a logo.bin
fastboot flash boot_a boot.img
fastboot flash dtb_a dtb.img
fastboot flash dtbo_a dtbo.img
fastboot flash system_a system.img_sparsechunk.0
fastboot flash -u system_a system.img_sparsechunk.1
fastboot flash -u system_a system.img_sparsechunk.2
fastboot flash -u system_a system.img_sparsechunk.3
fastboot flash -u system_a system.img_sparsechunk.4
fastboot flash -u system_a system.img_sparsechunk.5
fastboot flash -u system_a system.img_sparsechunk.6
fastboot flash -u system_a system.img_sparsechunk.7
fastboot flash -u system_a system.img_sparsechunk.8
fastboot flash system_b system_other.img_sparsechunk.0
fastboot flash -u system_b system_other.img_sparsechunk.1
fastboot flash vendor_a vendor.img
fastboot reboot
I already tried to flash the boot.img using boot_a and boot_b
I hope that someone could help me, I would be very grateful

DoctorStrange007 said:
Hi Juan
Very simple to solve. In the bootloader with the side buttons go to find recovery, in recovery the droid will appear, hold the Power button and with it pressed press up on the volume and hit factory reset . If that doesn't work what I think is impossible ,because your bootloader is blocked only using midiatek's flash tool
Click to expand...
Click to collapse
Thanks for the fast response, but my phone goes back to the fastboot menu after attempting to get in the recovery.
Is there any way I can get my hands on a scatter file, I didn't find one online or where I can contact someone who is willing to help?

same problem
JuanChoF23 said:
Thanks for the fast response, but my phone goes back to the fastboot menu after attempting to get in the recovery.
Is there any way I can get my hands on a scatter file, I didn't find one online or where I can contact someone who is willing to help?
Click to expand...
Click to collapse
im also stuck on fastboot, tried to flash firmware but didnt work
EDIT: can someone help me find the apropiate rom/firmware for my device:
PS C:\adb> fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-lima_32_retail-dd9cedf-191003
(bootloader) product: lima
(bootloader) board: lima
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: 2
(bootloader) storage-type: eMMC
(bootloader) emmc: 32GB SAMSUNG 4X6KMB RV=08 PV=00 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP4x DIE=16Gb M5=01 M6=07 M7=00 M8=12
(bootloader) cpu: MT6771V/WL
(bootloader) serialno: ZY326R9C9F
(bootloader) cid: 0x0032
(bootloader) channelid: 0x1b
(bootloader) uid: 520DE472090CB2D5000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) factory-modes: disabled
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 268435456
(bootloader) reason: No bootable A/B slot
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid:
(bootloader) date: 11-04-2019
(bootloader) sku: XT2015-2
(bootloader) carrier_sku: XT2015-2
(bootloader) battid: SB18C51711
(bootloader) iccid:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Thu Jan 10 21: 4:55 UTC 2019"
(bootloader) ro.build.fingerprint[0]: motorola/lima_32/lima:9/PMD29.70-7
(bootloader) ro.build.fingerprint[1]: 0/a51aa:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.51.85.lima_32.ret
(bootloader) ro.build.version.full[1]: ail.en.US
(bootloader) ro.build.version.mtk: alps-mp-p0.mp1.tc2sp-V1.47
(bootloader) version-baseband: MT6771_V16.03.01.88R
(bootloader) kernel.version[0]: Linux version 4.4.146+ ([email protected]
(bootloader) kernel.version[1]: 151) (gcc version 4.9.x 20150123 (prerel
(bootloader) kernel.version[2]: ease) (GCC) ) #1 SMP PREEMPT Mon Nov 18
(bootloader) kernel.version[3]: 20:12:45 CST 2019
(bootloader) frp-state: no protection (77)
(bootloader) ro.carrier: retla
(bootloader) current-slot: a
(bootloader) running-boot-lun: 0
(bootloader) running-slot: _a
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-bootable:_a: no
(bootloader) slot-bootable:_b: no
(bootloader) slot-retry-count:_a: 0
(bootloader) slot-retry-count:_b: 0
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) pcb-part-no: SB28C56212
all: listed above
finished. total time: 0.188s

youtube.com/watch?v=svtPdIVoloE

XT1922-2 JETER softbricked (newbie)

Hi. I've unlocked my phone for flashing and tried to install different ROMs, but nothing works.
My device is XT1922-2 JETER and I thought I'm having issues because I tried to install aljeter (as I can't find any jeter for XT1922-2..)
I tried to install different ROMs from TWRP, and even if it didn't give me any errors my phone was keeping loading into bootloader. Tried to use "fastboot oem fb_mode_clear" command but it didn't help.
Help me please, as I have no ideas what to do next and how to fix it. I don't know how to leave bootloop and make phone to load system.

Here's all the variables if that's helpful:
(bootloader) version: 0.5
(bootloader) version-bootloader[0]: MBM-2.1-aljeter_retail-b1f322d35c1-2
(bootloader) version-bootloader[1]: 00404
(bootloader) product: jeter
(bootloader) board: jeter
(bootloader) secure: yes
(bootloader) hwrev: P4
(bootloader) radio: 6
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SAMSUNG GX6BMB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 3GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=5F
(bootloader) cpu: MSM8937
(bootloader) serialno: ZL4223V3D5
(bootloader) cid: 0x0032
(bootloader) channelid: 0x00
(bootloader) uid: 3572CA9F00000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 535822336
(bootloader) reason: Reboot mode set to fastboot
(bootloader) meid:
(bootloader) date: 08-29-2018
(bootloader) sku: XT1922-2
(bootloader) carrier_sku: XT1922-2
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Wed Aug 5 11:34:57 UTC 2020"
(bootloader) ro.build.fingerprint[0]: motorola/aljeter_n/aljeter_n:9/PPP
(bootloader) ro.build.fingerprint[1]: S29.55-35-18-7/6a0d0:user/release-
(bootloader) ro.build.fingerprint[2]: keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.311.7.aljeter.ret
(bootloader) ro.build.version.full[1]: ail.en.US
(bootloader) ro.build.version.qcom: LA.UM.7.6.r1-03700-89xx.0
(bootloader) version-baseband: M8937_34.42.05.98R JETER_EMEA_CUST
(bootloader) kernel.version[0]: Linux version 3.18.120-perf-g3e480e17e11
(bootloader) kernel.version[1]: f-04280-g407726838ebf ([email protected]
(bootloader) kernel.version[2]: 8) (gcc version 4.9.x 20150123 (prerelea
(bootloader) kernel.version[3]: se) (GCC) ) #1 SMP PREEMPT Sat Apr 4 12:
(bootloader) kernel.version[4]: 24:37 CDT 2020
(bootloader) sbl1.git: MBM-2.1-aljeter_retail-0d2031d6b9-200404
(bootloader) rpm.git: MBM-2.1-aljeter_retail-af31f6ae-200404
(bootloader) tz.git: MBM-2.1-aljeter_retail-f9b266cd30-200404
(bootloader) devcfg.git: MBM-2.1-aljeter_retail-f9b266cd30-200404
(bootloader) keymaster.git: MBM-2.1-aljeter_retail-f9b266cd30-200404
(bootloader) cmnlib.git: MBM-2.1-aljeter_retail-f9b266cd30-200404
(bootloader) cmnlib64.git: MBM-2.1-aljeter_retail-f9b266cd30-200404
(bootloader) prov.git: MBM-2.1-aljeter_retail-f9b266cd30-200404
(bootloader) aboot.git: MBM-2.1-aljeter_retail-b1f322d35c1-200404
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: eegb
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
finished. total time: 0.152s
Click to expand...
Click to collapse

xt123xt said:
Hi. I've unlocked my phone for flashing and tried to install different ROMs, but nothing works.
My device is XT1922-2 JETER and I thought I'm having issues because I tried to install aljeter (as I can't find any jeter for XT1922-2..)
I tried to install different ROMs from TWRP, and even if it didn't give me any errors my phone was keeping loading into bootloader. Tried to use "fastboot oem fb_mode_clear" command but it didn't help.
Help me please, as I have no ideas what to do next and how to fix it. I don't know how to leave bootloop and make phone to load system.
Click to expand...
Click to collapse
The model XT1922-2 is ALJETER , try to install Stock by fastboot from this link you can get it
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip

Ruben8ap said:
The model XT1922-2 is ALJETER , try to install Stock by fastboot from this link you can get it
Click to expand...
Click to collapse
Thank you for your reply.
It gave me an error:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash system aljeter.zip
target reported max download size of 535822336 bytes
Invalid sparse file format at header magic
error: write_sparse_skip_chunk: don't care size 947459709 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 411641469 is not a multiple of the block size 4096
sending sparse 'system' 1/3 (523260 KB)...
error: write_sparse_skip_chunk: don't care size 947459709 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 947459709 is not a multiple of the block size 4096
OKAY [ 17.139s]
writing 'system' 1/3...
(bootloader) Invalid sparse image
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 17.145s
Click to expand...
Click to collapse

Try these https://mirrors.lolinet.com/firmware/moto/aljeter/official/RETEU/

I tried, didn't work.
In the variables it says JETER.
(bootloader) product: jeter
(bootloader) board: jeter
I suppose XT1922-2 JETER could be a version which is exclusive to the UK.

xt123xt said:
I tried, didn't work.
In the variables it says JETER.
(bootloader) product: jeter
(bootloader) board: jeter
I suppose XT1922-2 JETER could be a version which is exclusive to the UK.
Click to expand...
Click to collapse
Download this file --> https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Then you open the CMD and put in fastboot devices and the phone code should appear, of course the phone should already be in fastboot mode for that moment.
If everything is in order you should copy these commands:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash dsp adspso.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash oem oem.img
fastboot flash vendor vendor.img
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot flash logo logo.bin
fastboot reboot
Just select all then copy and paste them into the CMD and the stock installation process will start :fingers-crossed:

I suppose you've saved my phone. Thank you very much!

Hi, I carried out the instruction as given above by Ruben8ap, on my XT1922-2 Aljeter Moto G6 Play phone, and have recovered my phone, so I can boot into the OS, but I have lost access to Fastboot and TWRP, etc. So, I now have a phone that is stuck with this OS and no way of gaining root access or anything else. My bootloader says AP Fastboot Flash Mode (Secure). I cannot flash anything from the stock recovery on the SD card. Can anyone advise how I can get out of this state?

i stuck on bootloader i tried installing stock but no use please help me

(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8937-BC.12
(bootloader) product: montana
(bootloader) board: montana
(bootloader) secure: yes
(bootloader) hwrev: P3
(bootloader) radio: 5
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SAMSUNG RX64MB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 4GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=5F
(bootloader) cpu: MSM8937
(bootloader) serialno: ZY322Q2DZQ
(bootloader) cid: 0x00FF
(bootloader) channelid: 0x00
(bootloader) uid: 2CF0D7BF00000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 535822336
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: 359574083302191
(bootloader) meid:
(bootloader) date: 06-20-2018
(bootloader) sku: XT1795
(bootloader) carrier_sku:
(bootloader) battid: SB18C15119
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Sun Jul 16 9:14:51 UTC 1972"
(bootloader) ro.build.fingerprint[0]: motorola/montana/montana:8.1.0/OPP
(bootloader) ro.build.fingerprint[1]: S28.65-37-7-6/4cc5a:user/release-k
(bootloader) ro.build.fingerprint[2]: eys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.28.271.7.montana.ret
(bootloader) ro.build.version.full[1]: ail.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-08600-89xx.0
(bootloader) version-baseband: M8937_37.13.03.72u MONTANA_INDIADSDS_CUST
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-g26d4309 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.8 (GCC)
(bootloader) kernel.version[2]: ) #1 SMP PREEMPT Wed Jun 26 06:06:58 CDT
(bootloader) kernel.version[3]: 2019
(bootloader) sbl1.git: git=MBM-NG-VBC.12-0-g77d3670
(bootloader) rpm.git: git=bd76357-dirty
(bootloader) tz.git: git=9a0b157
(bootloader) devcfg.git: git=9a0b157
(bootloader) keymaster.git: git=9a0b157
(bootloader) cmnlib.git: git=9a0b157
(bootloader) cmnlib64.git: git=9a0b157
(bootloader) prov.git: git=9a0b157
(bootloader) aboot.git: git=MBM-NG-VBC.12-0-g0b9dae9
(bootloader) frp-state: protected (144)
(bootloader) ro.carrier: unknown
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
finished. total time: 0.094s

deepa007 said:
(bootloader) reason: Reboot mode set to fastboot
Click to expand...
Click to collapse
this is it
did you use a script to flash stock or did you flash all parts step by step?
at the beginning there is a
fastboot oem fb_mode_set this means fastboot always reboots to bootloader/fastboot to make sure all is done before reboot to system
at the end, when all files are flashed and all /data /cache etc is erased there is a
fastboot oem fb_mode_clear to clear the lock
fastboot reboot
done

zitronenmelissa said:
this is it
did you use a script to flash stock or did you flash all parts step by step?
at the beginning there is a
fastboot oem fb_mode_set this means fastboot always reboots to bootloader/fastboot to make sure all is done before reboot to system
at the end, when all files are flashed and all /data /cache etc is erased there is a
fastboot oem fb_mode_clear to clear the lock
fastboot reboot
done
Click to expand...
Click to collapse
yeah then also i stuck stuck on fastboot
mode

Try booting the phone to bootloader from fastboot command through system. Then you can copy the rom to internal storage and then flash directly.

deepa007 said:
yeah then also i stuck stuck on fastboot
mode
Click to expand...
Click to collapse
how did you flash stock? with a script or step by step? which firmware did you choose?
here is a good HowTo: https://forum.xda-developers.com/t/...latam-ora-playpl-retail-retru-trueth.3845848/
you can boot twrp with fastboot: fastboot boot twrp-name.img
then you should backup efs / persist to sdcard first if you haven't done that already.
then format data in wipe menu (agree with YES) and reboot

rdbhadri said:
Try booting the phone to bootloader from fastboot command through system. Then you can copy the rom to internal storage and then flash directly.
Click to expand...
Click to collapse
Please tell me the steps how to do

IMEI 0

HELLO EVERYONE! PLEASE HELP TO RESTORE IMEI MOTO Z2 FORCE (XT1789-04 TMOBILE)
SHORT STORY: I TRIED TO FLASH TO ANDROID 9 FROM VERIZON CARRIER, I UNLOCKED BOOTLOADER, BACKUP ALL DATA BY TWRP BUT I DID SOMETHING WRONG AND DELETED BACKED UP DATA BY MISTAKE.
USING MOTOROLA RESCUE I CAN RESTORE ORIGINAL FIRMWARE, BUT IMEI SHOWS 0, WIFI ALSO DOESN'T WORK.
COULD SOMEONE EXPLAIN HOW TO RESTORE EFS FOLDER , IS IT ANY SOLUTION AND EXPLANATION HOW TO DO IT.
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-nash_tmo-1f35305-190705
(bootloader) product: nash
(bootloader) board: nash
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: NA_UMTS
(bootloader) storage-type: UFS
(bootloader) emmc: N/A
(bootloader) ufs: 64GB SAMSUNG KLUCG4J1ED-B0C1 FV=0200
(bootloader) ram: 4GB SAMSUNG LP4x DIE=16Gb M5=01 M6=06 M7=10 M8=12
(bootloader) cpu: MSM8998 2.1 (0)
(bootloader) serialno: ZY224CBHHC
(bootloader) cid: 0x0015
(bootloader) channelid: 0x85
(bootloader) uid: 3C0920D9
(bootloader) securestate: flashing_unlocked
(bootloader) verity-state: logging (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: 3565**********
(bootloader) meid:
(bootloader) date: 07-30-2017
(bootloader) sku: XT1789-04
(bootloader) carrier_sku:
(bootloader) battid: SNN5987A
(bootloader) battery-voltage: 3785
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/nash_tmo_c/nash:8.0.0/OCX
(bootloader) ro.build.fingerprint[1]: S27.109-51-14-7/12:user/release-ke
(bootloader) ro.build.fingerprint[2]: ys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.351.12.nash_tmo_c
(bootloader) ro.build.version.full[1]: .tmo.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.4.r1-04300-8x98.0
(bootloader) version-baseband: M8998TMO_20207.117.02.41.08u NUS
(bootloader) kernel.version[0]: Linux version 4.4.78-perf-g5b6c26aa-0177
(bootloader) kernel.version[1]: 2-g1e9c9a2 ([email protected]) (gcc ver
(bootloader) kernel.version[2]: sion 4.9.x 20150123 (prerelease) (GCC) )
(bootloader) kernel.version[3]: #1 SMP PREEMPT Fri Jul 5 12:49:00 CDT 2
(bootloader) kernel.version[4]: 019
(bootloader) git:abl: MBM-3.0-nash_tmo-1f35305-190705
(bootloader) git:xbl: MBM-3.0-nash_tmo-9869834-190705
(bootloader) gitmic: MBM-3.0-nash_tmo-9869834-190705
(bootloader) git:rpm: MBM-3.0-nash_tmo-b13e14f-190705
(bootloader) git:tz: MBM-3.0-nash_tmo-1bc18bf-190705
(bootloader) git:hyp: MBM-3.0-nash_tmo-1bc18bf-190705
(bootloader) git:devcfg: MBM-3.0-nash_tmo-1bc18bf-190705
(bootloader) git:cmnlib: MBM-3.0-nash_tmo-1bc18bf-190705
(bootloader) git:cmnlib64: MBM-3.0-nash_tmo-1bc18bf-190705
(bootloader) git:keymaster: MBM-3.0-nash_tmo-1bc18bf-190705
(bootloader) git:storsec: MBM-3.0-nash_tmo-1bc18bf-190705
(bootloader) gitrov: MBM-3.0-nash_tmo-1bc18bf-190705
(bootloader) qe: "qe 1/1"
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: tmo
(bootloader) current-slot: _a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 2
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: yes
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 6
all: listed above
Finished. Total time: 0.229s

IMEI is not in Android/ROM, ist in PDS partition!
You hab a backup from all version with twrp?

R!ffRaff said:
IMEI is not in Android/ROM, ist in PDS partition!
You hab a backup from all version with twrp?
Click to expand...
Click to collapse
I did, but I formatted hard drive by mistake and lost it, now trying to restore imei and have no idei how to do it

khurshed04 said:
I did, but I formatted hard drive by mistake and lost it, now trying to restore imei and have no idei how to do it
Click to expand...
Click to collapse
You can try restore the backup with a recover

I had the same problem , flashing lineageos seems to fix it but you can never downgrade below android 10 again and keep baseband. You're stuck with using 10+ only unless you don't care about IMEI/baseband but yeah just flash the newest lineage and if that doesn't work flash the second to newest etc. Worked for me several times

In my case with Sprint xt1789-03 help this way:
Flash NASH_RETAIL_9.0_PPX29.159-24 with MotoFlashPro WHITHOUT modem section - UNCHECK this:
%fastboot% flash dsp adspso.bin
%fastboot% flash modem NON-HLOS.bin
%fastboot% flash fsg fsg.mbn
%fastboot% flash bluetooth BTFM.bin
%fastboot% erase modemst1
%fastboot% erase modemst2
Then flash full latest sprit 8 android stock

PrivyetCyka said:
I had the same problem , flashing lineageos seems to fix it but you can never downgrade below android 10 again and keep baseband. You're stuck with using 10+ only unless you don't care about IMEI/baseband but yeah just flash the newest lineage and if that doesn't work flash the second to newest etc. Worked for me several times
Click to expand...
Click to collapse
That worked for my Device too. I had lost IMEI & baseband. First I flashed the latest TMO(04) image (you can use Lenovo/Motorola Rescue and Smart Assistant Software for Windows ) to get the baseband working and then flash LineageOS.