Related
THIS TOOLS WORK ON LENOVO K910 DUAL SIM WITH ANDROID 4.4.x VERSION IF YOU FOUND THAT WORK ON OTHERS LET ME KNOWIF YOU HAVE ANY OTHER K910 REATHER THAN THIS IT'S YOUR RESPONSABILITY IF SOMETHING GOES WRONG!
Here are a few tools that could be very usefull that i've found here and there.
Please, feel free to link what you think that could be usefull and try to keep it in just one place for easy access. :good:
Root Your Lenovo K910 - Easy way to get rooted
Download THIS file
Connect your phone to PC through USB cable
Turn USB debugging ON
Run the file you just downloaded
Unlock you 4.4.x bootloader
Go to this thread and follow instructions from there.
Install TWRP Easy & Clean - Simple but effective way to install TWRP with just one click
Download THIS file
Connect your phone to PC through USB cable
Turn USB debugging ON
Run the file you just downloaded
Philz Touch CWM
Download Philz Touch
Copy Philz Touch Recovery to SDCARD
Reboot on your current recovery
Install the file you've copied
TWRP v2.7.1.5 - from master lie at 4pdu
Screenshots
Download TWRP v7.3.1.5
Copy TWRP v7.3.1.5 to SDCARD
Reboot on your current recovery
Install the file you've copied
TWRP v2.8.1.0
Here you can find the last TWRP available along with 6 themes.
important - This recovery isn't compatiblem with backups from other versions. To use it properly make a maback with this version after installation.
Copy the chosen theme to SDCARD
Reboot on your current recovery
Install the file you've copied
Latest K910 Roms
Here you'll find the latest version for our K910. At this moment VIBEUI_V2.0_1441_7.2.1_DEV_K910 it's the latest
All tools above work with this version
Question: What are the differencies between K910 and K910e?
Answer: Lenovo K910e VIBE Z, this is a little different from Lenovo K910 VIBE Z, because it's certified by Chinese Authorities in China. It's CDMA version. Therefore, the design and specs are almost similar to those of Lenovo Vibe Z K910. This smartphone (K910e) supports 3G:CDMA EVDO 800/1900MHz, and Lenovo VIBE Z K910 supports the all bands like 3G: WCDMA 850/900/1700/1900/2100MHz
Changelog 1441
[System]
Optimization into the dial pad and address book slow response
[Music Store]
First entered the music repair shop
Click installed the necessary permissions will not jump to the top of the page after page management fixes from multitasking
Press music store appeared flash back
[eggplant]
Fast pass new Customizable avatars, can and Apple, PC connection
[Music Cloud Notebook]
Repair notes classified in the input box click on the icon and press return to enter the upper left corner of the keyboard is not hidden
Repair music search cloud memo notes the contents of overlap with the date and time
[Cloud Services]
Repair recover data from SD card appear unresponsive cloud services
[Game Center]
Optimize the use Back button to exit the game center, not the background permanent memory into the game after the acceleration will pop up Game Center game download page to download the game to complete the repair stop running
Install Google Play - Recovery
Download GApps_4.4.2.zip and install it through recovery
Install Google Play - GMS TOOLS
Download GMS Tool and install it
Go to GMS Tool > Install Recommend > Install the 3 Packages
Reboot
Unlock Lenovo Weather Cities - This will unlock cities worldwide
Download and install xPosed
Download and install vibexpert
Open xPosed > Framework > Install / Update
Reboot
Open vibexpert > UI > Worldwide Weather App
Make any other change you want on the app
Reboot
Tools to Recover a Bricked Phone - Make sure you know what you're doing!
QPST - Qualcomm aplication to recover your phone
Drivers - Drivers needed to use QPST [If your PC doesn't recognize your phone, make sure you install according to your OS]
Lenovo Drivers - Drivers used to connect Phone-PC
HTC Mania guide from corion :good: - A guide with explain step by step how to use the above files
corion said:
Bien, primero de todo me gustaría dar las gracias a seergio por darme un rayito de esperanza. Él fue quien me comentó la existencia de la herramienta QPST (Qualcomm Product Support Tool). También a Stack de http://lefenbbs.lenovo.com/, a oscarxvita de http://forums.wpcentral.com/ y a otros tantos que no recuerdo, porque tras leerme sus tutoriales, tras tener un batiburrillo de ideas y muchas pruebas, he conseguido que mi K910 vuelva a la vida.
Decir que mi móvil estaba totalmente brickeado, no encendía, no arrancaba en recovery, ni en bootloader, ni cargaba.
======= PREPARACIÓN ==================
Para traer de vuelta a la vida a nuestro querido móvil vamos a utilizar la herramienta QPST (Qualcomm Product Support Tool). QPST es un conjunto de herramientas de Windows diseñado para interactuar, controlar, y testear teléfonos CDMA que lleven Qualcomm ASICs.
La herramienta QPST la podemos descargar de aquí
También necesitaremos este 7z para el flashearlo. Descargar aquí
======= COMENCEMOS ==================
Primero de todo es iniciar Windows con la opción de "Deshabilitar la comprobación de firmas de controladores digitales". Para ello cuanto iniciemos el sistema pulsamos F8 hasta que nos salga el menú de arranque de Windows, una vez dentro seleccionamos la opción que he dicho anteriormente.
Una vez iniciado Windows lo que debemos hacer es instalar la herramienta QPST, junto con QPST se instalarán los drivers de Qualcomm.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Como vemos, se nos habrán instalado varias herramientas. Nosotros para lo que nos traemos entre manos solo usaremos las dos que están en un recuadro rojo. eMMC Software Download y QPST Configuration.
El siguiente paso es conectar el móvil. Para que podamos trabajar con él es necesario que se conecte en modo download, para ello, pulsamos la tecla de volumen - y lo conectamos al pc. En el caso de que en el teléfono no se encienda el LED azul y el pc no detecte ningún dispositivo, hay que quitarle la batería y conectarlo sin ella. Aquí tenemos un vídeo de como quitar la tapa trasera.
Cuando conectemos el teléfono, si tenemos correctamente instalados los drivers de Qualcomm, nos debería de aparecer un nuevo dispositivo tal que así:
Si nos sale un dispositivo con un signo de admiración y llamado QHSUSB_DLOAD o QHSUSB_BULK, entonces debemos de indicarle a Windows que drivers instalar. Para ello ya sabéis, botón derecho sobre el dispositivo, Actualizar software del controlador --> Buscar software de controlador en el equipo, y le indicamos que busque dentro de la carpeta drivers, que está dentro de la carpeta QPST_K910, donde estaba el instalador del programa.
El siguiente paso es descomprimir el archivo 7z.
Cuando lo hayamos descomprimido, recomiendo cortar todo lo que hay dentro, crear una carpeta llamada bin en la raíz de alguno de nuestros discos duros, y pegar todo allí.
Seguidamente buscamos un archivo llamado flash_local.xml y lo abrimos para su edición.
La ruta que está señalada debemos de modificarla y poner la ruta donde tengamos los archivos que hemos descomprimido del arhcivo 7z. Por eso decía de ponerlo dentro de una carpeta llamada bin, en la raíz del disco duro, para que solo haya que cambiar la letra de la unidad. Bueno, pues una vez cambiada la ruta guardamos y cerramos.
Ahora toca trabajar con QPST . (Siempre que ejecutemos alguna de sus herramientas, lo debemos hacer con permisos de administrador).
1.- Ejecutamos QPST Configuration. Si todo ha ido bien nos debería de aparecer nuestro teléfono.
2.- Ejecutamos eMMC Software Download y hacemos lo siguiente:
Paso 1: En Sahara XML file, ponemos la ruta donde está el archivo XML que editamos anteriormente.
Paso 2: En el campo de Flash Programmer file name ponemos MPRG8974.mbn
Paso 3: En el campo de Boot Image ponemos 8974_msimage.mbn
Paso 4: Pulsamos en Load XML def... y seleccionamos el archivo rawprogram0.xml
Paso 5: Pulsamos en Load patch def... y seleccionamos el archivo patch0.xml
Paso 6: Desmarcamos la casilla Program MMC device
Paso 7: Pulsamos en Download y esperamos que acabe el proceso. Posiblemente, después del paso 7, nos saldrá uno o varios mensajes diciendo que se han detectado unos discos duros, que los formateemos para usarlos. DEBEMOS PULSAR EN CANCELAR.
Paso 8: Desmarcamos la casilla Programm Boot Loaders
Paso 9: Marcamos Program MMC device.
Paso 10: Seleccionamos nuestro teléfono de entre los dispositivos que aparezcan (los otros deben de ser el/los discos duros que tengamos).
Paso 11: Pulsamos en Download.
Cuando acabe el proceso desconectamos el móvil del ordenador, le metemos la batería e intentamos iniciarlo.
Espero que os sirva de ayuda.
Cualquier problema id posteando e intentaré ayudaros en lo que buenamente pueda.
Click to expand...
Click to collapse
Or you might prefer in English, Step-by-Step
Please don't fill this threat with thanks. A simple click and rate this thread will do :good:
Thank you
Crowds
XDA:DevDB Information
All Tools in One Place, Tool/Utility for the Android General
Contributors
Crowds, sash
Version Information
Status: Stable
Current Stable Version: 1
Created 2014-10-10
Last Updated 2014-10-10
XDA:DevDB Information
All Tools in One Place, Tool/Utility for the Android General
Contributors
Crowds, sash
Version Information
Status: Stable
Current Stable Version: 1
Created 2014-10-10
Last Updated 2014-11-07
Codes [UPDATE SET. 29th]
K910 Dual-SIM secret codes:
# # # # 1111 # : Engineer Mode (To test all hardware and sensors)
# # # # 537999 # : Developer Options (Full)
# # # # 0000 # : ROM Version
#### 3333 # or #### 8888 # : OffLineLog
####5236# : LCD display name
####2834# : Close ES325
####8899# : UMS Mode
Thanks @sash for those
####2222# show serial number
####5993# show software version
####7777# factory reset
####46361111# Network Info in Android 4.4
Apps You Can Freeze / Delete
I recomend a backup first in case you want something back
For obvious reasons i recomend freeze them first and only after you make sure everything works delete.
There are a few apps that despite they could be deleted without affectinf the system they afect others (i.e. browser makes some apps fail like play google).
Android Live Wallpaper
ANT Hal Service
Baidu IME
Basic Daydreams
Black Hole
Browser
Bubbles
Calendar
CarVoice
Downloads
Driving Apps
Face Unlock
File Browser
Game World
Google IME
Google Search
Google+
Hangouts
LASF SDK Lite
Le Wallpaper
Lenote
Lenovo Payment Service
Lenovo Service
Lenovo speech synthesis
Lenovo voice recognition
Lenovo Weather
Lenovo Weather Service
Lenovo Weather Theme
LenovoStore
Live Walpaper Picker
Magic Smoke Walpaper
Music
Music Visualisation
News & Weather
Phase Beam
Photo Screensavers
Players Tutorial
Print Spooler
Private Vault
Search
SecretCode
SECUREit
SHAREit
Street View
SYNCit
System Update
User Center
User Experience
Video
Voice
VoiceAssistant
Youyue
[Reserved for future use]
can i unroot the phone?
so that i can OTA update maybe? b ecause OTA update fails maybe because of root it is?
gimmeluck2 said:
can i unroot the phone?
so that i can OTA update maybe? b ecause OTA update fails maybe because of root it is?
Click to expand...
Click to collapse
You'll receive and be able to install OTA updates if the rom you're using is an "original" one.
If your rom was a developed one by someone you can't.
Doesn't have to do with the fact your phone is rooted or not.
I was able to do an OTA upgrade on my phone and it was rooted.
Anyway I think that RootGenious can unroot. Don't remember and I can't confirm atm.
Edit: witch version you have? Can you link it?
Crowds said:
You'll receive and be able to install OTA updates if the rom you're using is an "original" one.
If your rom was a developed one by someone you can't.
Doesn't have to do with the fact your phone is rooted or not.
I was able to do an OTA upgrade on my phone and it was rooted.
Anyway I think that RootGenious can unroot. Don't remember and I can't confirm atm.
Edit: witch version you have? Can you link it?
Click to expand...
Click to collapse
i have VIBEUI_V2.0_1435_7.2.1_ST_K910_WC3A official,
itcan see system update to
VIBEUI_V2.0_1437_7.44.1_ST_K910
it downloads it but
but it fails after restart. phone rooted and gapps flashed.
CAn it be because of the some chinesee system apps which i Uninstalled ( not freeze) by titanium pro?
gimmeluck2 said:
i have VIBEUI_V2.0_1435_7.2.1_ST_K910_WC3A official,
itcan see system update to
VIBEUI_V2.0_1437_7.44.1_ST_K910
it downloads it but
but it fails after restart. phone rooted and gapps flashed.
Can it be because of the some chinesee system apps which i Uninstalled ( not freeze) by titanium pro?
Click to expand...
Click to collapse
Don't believe that's chinese apps had any influence anyway, this time in order to have the latest rom follow this:
Install Rom from here [1437 is the latest atm for K910 witch is diferent of K910e]
Root your device [follow the steps from 1st post]
Install GMS Tools [follow the steps from 1st post]
Instal TWRP [follow the steps from 1st post]
1st freeze the apps you want and only then after confirm everything works at lest for 1 day you can delete the freezed apps.
note: Your problems with OTA updates may came from the deleted files
Good luck
Crowds
Crowds said:
K910 Dual-SIM secret codes:
# # # # 1111 # : Engineer Mode (To test all hardware and sensors)
# # # # 537999 # : Developer Options (Full)
# # # # 0000 # : ROM Version
#### 3333 # or #### 8888 # : OffLineLog
Click to expand...
Click to collapse
hello,
i have update my snapit camera(viberom_v1.0_1407) trough in app update. then i integrate update into rom by titanium backup. now camera cannot open even with other camera app.
i tried uninstall/reinstall apk but failed. then plan to try flash rom brought me to this thread and to this above post.
my phone fail camera test in engineer mode! will it possibly be ok after flash new rom? please help
adam_ridzuan said:
hello,
i have update my snapit camera(viberom_v1.0_1407) trough in app update. then i integrate update into rom by titanium backup. now camera cannot open even with other camera app.
i tried uninstall/reinstall apk but failed. then plan to try flash rom brought me to this thread and to this above post.
my phone fail camera test in engineer mode! will it possibly be ok after flash new rom? please help
Click to expand...
Click to collapse
That may be for 2 reasons as far as i am aware.
1. despite there's a new camere version (V.3.6.7) i might be incompatible with your version of VibeUI (is it 1.0_1407?!?! that's old)
2. Titanium Backup it's a great program but it's know for some years (at least 4) that some systenm apps may fail. Not sure if the programers had solved this in the last years since i've been out of xda for 2 years.
3. You may try to solve that this way:
Install any root explorer from market (i.e. Es File Explorer)
Go to settings > root > give permission > root again and in the pop up window choose RW for both
Go to system > app and rename SCG_arm_fhd_pro_sus.apk to SCG_arm_fhd_pro_sus.apk.bk
Make a copy of com-lenovo.sgc-1.apk to your sdcard (on data > app)
delete the file from data > app
Go to the file you just copied on sdcard and move it to system > app
Long press and choose permissions.
Check all the boxes available and reboot
See if this work if not an upgrade for the last VibeUI will do.
Hope it helps and you've understand :laugh:
Crowds said:
That may be for 2 reasons as far as i am aware.
1. despite there's a new camere version (V.3.6.7) i might be incompatible with your version of VibeUI (is it 1.0_1407?!?! that's old)
2. Titanium Backup it's a great program but it's know for some years (at least 4) that some systenm apps may fail. Not sure if the programers had solved this in the last years since i've been out of xda for 2 years.
3. You may try to solve that this way:
Install any root explorer from market (i.e. Es File Explorer)
Go to settings > root > give permission > root again and in the pop up window choose RW for both
Go to system > app and rename SCG_arm_fhd_pro_sus.apk to SCG_arm_fhd_pro_sus.apk.bk
Make a copy of com-lenovo.sgc-1.apk to your sdcard (on data > app)
delete the file from data > app
Go to the file you just copied on sdcard and move it to system > app
Long press and choose permissions.
Check all the boxes available and reboot
See if this work if not an upgrade for the last VibeUI will do.
Hope it helps and you've understand :laugh:
Click to expand...
Click to collapse
I understand, but the problem is, there is no com-lenovo and scg_arm. Any idea"?
adam_ridzuan said:
I understand, but the problem is, there is no com-lenovo and scg_arm. Any idea"?
Click to expand...
Click to collapse
You should have some scg file. tha't the one related with camera
Crowds said:
You should have some scg file. tha't the one related with camera
Click to expand...
Click to collapse
Then that will be the main problem I think. Proceed to flash latest rom. Tq very much
DEAD K910
Good day, please accept my apologies if this is posted in the wrong area of the forum. I have a Lenovo K910 dual SIMM unit from China. One of our employees (we sell these devices) was attempting to return the unit to factory default and has managed to completely destroy the unit. It will not show any display and will not vibrate when switched on. All that happens is the red LED will flash almost every second when plugged into a PC. The device will only show up as a fastboot device with the device listed as 'bf2b867 fastboot'. I have tried loading several different QPST drivers to try work with the QPST tools but to no avail.
Thanks for your time Any help would be most appreciated.
RASTAS12 said:
Good day, please accept my apologies if this is posted in the wrong area of the forum. I have a Lenovo K910 dual SIMM unit from China. One of our employees (we sell these devices) was attempting to return the unit to factory default and has managed to completely destroy the unit. It will not show any display and will not vibrate when switched on. All that happens is the red LED will flash almost every second when plugged into a PC. The device will only show up as a fastboot device with the device listed as 'bf2b867 fastboot'. I have tried loading several different QPST drivers to try work with the QPST tools but to no avail.
Thanks for your time Any help would be most appreciated.
Click to expand...
Click to collapse
Hi there
First of all don worry about posting here. You're at the right place.
OK, regarding your question, i can affirm by my own experience, that the phone isn't dead. I'ts almost but it isn't
Latter i will write a more detail step-by-step but for now i think this will do.
By your explanation, you must remove your battery and keep it that way. If you don't know how check this video. I had to do that
Read next post
1. It's better if you work on a complete clean PC. This was the only way i'be been able to recover mine after ONE MONTH!!! I use Win8.1 and just installed the updates from microsoft.
2. Download all the files posted on 1st post in the "Tools to Recover a Bricked Phone" section
3. Download QPST file from here. This is the original Lenovo files to restore
4. Install QPST and then rebbot with "Disable signature verification of digital controllers" checked
5. Open Device Manager
6. Connect your phone to PC through a USB cable pressing VOL-. I recommend that you use and old USB extension cable. We want this to slow down the information between phone and PC and COM port doesn't disapear in a blink of an eye.
--- If VOL- doesn't work try several combinations, like VOL+/USB cable or VOL-/VOL+/USB ---
7. By this time your PC began searching for the correct drivers. If everything went ok, device manager will see android phone as QHSUSB_DLOAD or QHSUSB_BULK
8. Install the drivers manually from the drivers folder you've just downloaded (Install accordly to your OS version)
9. Install Lenovo drivers
10. Reboot as in step 4
--- Now it's when the real work begin ---
11. Open Device Manager and QPST Configuration (as administrator) from the instaled folder
12. Connect your phone through USB extention cable again and check if Device manager are ok (Something like Qualcoom_something) and if QPST Configuration starts something. If so, you're good to go.
Now probably this is the part when you ask 700€ on your customer or send the phone back to repair
This is a trial and error work. COM port will only be visible for a breef momment. The time you pressed ENTER key is the real key to manage go further
Make sure that flash_local.xml had the right path, like:
Step 1: Sahara XML file, put the path where the XML file is edited above.
Step 2: In the field of Flash Programmer put MPRG8974.mbn
Step 3: In the field Boot Image put 8974_msimage.mbn
Step 4: Then hit def XML Load and select the file rawprogram0.xml
Step 5: Then hit def patch Load and select the file patch0.xml
Step 6: Program uncheck the box MMC device
Step 7: Then hit Download and hope to finish the process. Possibly, after step 7, we will get one or more messages saying that some hard drives have been detected, the formateemos to use. MUST CLICK CANCEL.
Step 8: Uncheck the box Boot Loaders Programm
Step 9: Mark Program MMC device.
Step 10: Select your phone from the devices that appear (the other must be / have hard drives).
Step 11: Then hit Download.
When the process ended, Insert the battery and try to start it but keep the phone connected to PC this is important because your battery is completely dead atm.
I hope this will help you.
Like i said i've been one month without my phone but after i decided to format all my driver and install Win from scratch this will only take me half an hour till i get the DW mode.
Good luck:good:
Chears
Crowds
RASTAS12 said:
Good day, please accept my apologies if this is posted in the wrong area of the forum. I have a Lenovo K910 dual SIMM unit from China. One of our employees (we sell these devices) was attempting to return the unit to factory default and has managed to completely destroy the unit. It will not show any display and will not vibrate when switched on. All that happens is the red LED will flash almost every second when plugged into a PC. The device will only show up as a fastboot device with the device listed as 'bf2b867 fastboot'. I have tried loading several different QPST drivers to try work with the QPST tools but to no avail.
Thanks for your time Any help would be most appreciated.
Click to expand...
Click to collapse
Here you can follow my Step-by-Step Tutorial.
This is a long and exhaustive one but i think it will cover all possible aspects.
In your case specifically you need to follow the instructions on post #6 before applying what's written on post #5
Read carefully or you have 2 more possibilities.
Return phone to the owner and give him my link
Sent the phone back to china and ask to your customer big, big money
:laugh::laugh::laugh:
C hears
Crowds
Crowds said:
Here you can follow my Step-by-Step Tutorial.
This is a long and exhaustive one but i think it will cover all possible aspects.
In your case specifically you need to follow the instructions on post #6 before applying what's written on post #5
Read carefully or you have 2 more possibilities.
Return phone to the owner and give him my link
Sent the phone back to china and ask to your customer big, big money
:laugh::laugh::laugh:
C hears
Crowds
Click to expand...
Click to collapse
Crowds you are a champion. I have just arrived at work and will now start as per your instructions. I can not thank you enough for the time you have put into this. I will revert when done and let you know how things pan out. Once again huge thanks for your time.
Crowds said:
Latest K910 Roms
Here & Here you'll find the latest version for our K910. At this moment VIBEUI_V2.0_1437_ST_K910 it's the latest [I said K910 not K910e]
All tools above work with this version
Question: What are the differencies between K910 and K910e?
Answer: Lenovo K910e VIBE Z, this is a little different from Lenovo K910 VIBE Z, because it's certified by Chinese Authorities in China. It's CDMA version. Therefore, the design and specs are almost similar to those of Lenovo Vibe Z K910. This smartphone (K910e) supports 3G:CDMA EVDO 800/1900MHz, and Lenovo VIBE Z K910 supports the all bands like 3G: WCDMA 850/900/1700/1900/2100MHz
Changelog
[Recommend]
New Bubble lock screen
New fantasy lock screen
Prompt notification of new fully charged
Talking Alarm Clock humane optimization improvements
The new interface optimized video and operating experience
[System]
New integrated andorid new boot animation pictures
After the new OTA upgrade was successful, increasing switching Huan Jing and bubble lock screen theme guide
[Video]
Optimize the new interface and operating experience
[Clock]
New data update holidays to get data from the clock yourself, holidays can support up to 4.2 system
Add a timer to remind expression interface adjustment and optimization of terms
New World clock search areas of the city, you need to have fuzzy search capabilities, including Pinyin, English, letters, characters
Press the home button automatically suspended new, user-friendly alarm pause
New calls during alerts
New animation timer guide
Talking Alarm Clock humane optimization improvements
[Notification Center]
Prompt notification of new fully charged
Multi-task optimization and optimization of layout adjustment, screenshots large view more user-friendly operation and use
Optimization Memory Optimization
Repair certain application multitasking interface is black thumbnails
[Lenovo lock screen]
New Bubble lock screen
New fantasy lock screen
New digital lock digital position random option
Added option to simplify operator information
Optimization of anti inadvertently specification improvements, the situation did not reduce the protection of lives
[Lenovo Services Framework]
Optimization optimized interface, maintain and vibe2.0 style consistency; code optimization to improve performance
Crowds
Click to expand...
Click to collapse
Kindly, Explain how to install the latest ROM. I just bought Vibe Z k910 and I need to update its rom from vibeui v1.5 to v2.0.
Are there other tools should I use to update the rom?
Thanks
agsao said:
Kindly, Explain how to install the latest ROM. I just bought Vibe Z k910 and I need to update its rom from vibeui v1.5 to v2.0.
Are there other tools should I use to update the rom?
Thanks
Click to expand...
Click to collapse
Download last rom and copy to sdcard
see if you have twrp installed if not dw from 1st post and follow instructions
then enter in twrp by rebooting and keep pressed 2 vol buttons till lenovo logo appear
install from there
Thanks for your cooperation, but excuse me I am new with android could you check the following steps if these are ok or there is something missing:
1. I rooted my phone with RootGenius
2. I installed TWRP and I checked it works well
3. I downloaded the latest ROM VibeUi_V2.0_1437_K910 as my phone version K910
4. I should placed the new rom in my "internal memory" on root --- I've no external SD slot ---
5. I should enter TWRP by rebooting phone and keeping 2 volume buttons pressed.
6. Should I backup something ????
7. On TWRP Wipe >> Swipe to factory reset
8. On TWRP Install >> Select the new ROM from the internal memory ????
9. On TWRP Wipe >> Advanced Wipe >> select Cache & Dalvik Cache >> Swipe to Wipe
10. Reboot
11. Install GMS Tools then Google Play
==> I don't know is the new software rooted or not? Can I delete Chinese app without rooting?
==> What is the need of "Tools to Recover a Bricked Phone" as shown in above instruction?
sorry for long questions and sorry for my language "from Egypt"
but I have to make sure that I'll follow the right steps first.
Thanks alot
THIS IS A COMPILING GUIDE FOR CREATE YOUR PACK TO UPDATE YOUR Z1 (C6943 THE BRAZILIAN VERSION WITH DTV) FOR THE 14.4.A.157 OFICIAL FIRMWARE WITH ROOT, DEODEXED AND 4K.
1 - First of all you need to create your FTF file of the 14.4.A.157 for your specefically version (C6943).
ALREADY DONE FILE HERE (JUMP TO STEP 2) THANKS TO @RHBH.
A- Download and install the Flashtool. (don't forget to update to the latest version always)
B - After installed go to the tab DEVICES -> CHECK UPDATES -> select the xperia z1 -> select the tab C6943 and double tap the 1276-7099 CUSTOMIZED BR like on the image bellow, after this you gonna start to download the firmware.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
C - When conclued on the next window that will apear just move all the files from the left side (folder list) to the right side (firmware content) then click on create and wait to your FTF file be created, after this you file will be on the firmware folder of the flashtool ready to be flashed.
2 - Now it's time to flash, just open the flashtool, click on the first icon 'lightning bolt' and select the flashmode, now select the correct firmware and click on flash, don't do nothing more then that, after this connect your Z1 holding the button VOLUME DOWN, the flashing process will start.
3 - After this you will need to get root, so download this files KERNEL .108 FOR C69XX, KERNEL .157 FOR C6943 and the root tool
A - Open Flashtools, click the 'lightning bolt' icon and select the firmware 108. Click FLASH and plug the phone on computer holding the volume down.
B - In just a few seconds the app warns you that the procedure is finished and it will tell you to restart, do it.
C - Start your phone, check out on options if "USB Debugg" and "Unknown Applications" are enabled and Apply the Root with the root tool.
D - extract the root tool and plug your device into your comput.er
E - Run install.bat and follow the instructions on screen it's easy.
F - After the root process is done, check if your phone is really rooted then Turn off the phone.
G - now just repeat the step A with 157 specific firmware for C6943.
4 - Time to install the RECOVERY
A - Download the correct version from NUT'S DATABASE chose the latest version of the file "Z1-lockeddualrecovery[VERSION]-BETA.installer.zip"
B - After downloaded and extracted, plug in your phone with "USB Debugg" and "Unknown Applications" enabled and run install.bat, now just select the right option and follow the instructions, is pretty easy too.
5 - After done, it's time to deodex your rom, download this KIT.
ALREADY DONE FILE HERE, JUST IGNORE THE INSTRUCTIONS TO CREATE THE FILE.
A - Extract downloaded tool and Run main.bat.
B - Type 1 to create working folder.
C - Don't forgetting to enable the USB Debugging, Plug in your phone, then type 2 to pull files from your device. (This step can be skipped if you manually copy /system/app, /system/framework, /system/priv-app to /Kitkat_Deodexer/system)
D - Type 3 to start deodexing and Type 4 to create flashable zip.
E - Move the .zip to your sd card then turn on the phone on the recovery. (when the phone starts to boot and a green light shows up press VOLUME DOWN, the light will turn on purple and the phone will enter on the recovery mode)
F - Now just flash the .zip on the recovery and it's all done.
6 - Now it's time to install the 4K. You can use this video guide too.
A - Download this files, MOD, Serajr XPERIA and the XPOSED INSTALLER.
B - Move all the files to the sd card.
C - Just open and install the XPOSED INSTALLER and the Serajr Xperia in this order.
D - Open the XPOSED INSTALLER, go to FRAMEWORK, INSTALL and REBOOT
E - Now go to MODULES, Activate(check) the Serajr XPERIA and REEBOT AGAIN.
F - After this, go to the app menu and open the XPERIA XPOSED, go to system and ENABLE CUSTOMIZATIONS (CHECK IF SUPER USER MODE IS ENABLED TOO)
E - Now just turn off your phone and go to the RECOVERY MODE AGAIN.
F - Flash the "MOD" file on the recovery and wipe the dalvik cache.
G - ALL DONE, XPERIA Z1 ROOTED, DEODEXED and with 4K. :highfive:
IF YOU DID EVERYTHING GREAT DON'T FORGET TO COMMENT, WILL BE MY BEST REWARD.
c6943 patch please
dstrikersZ1 said:
c6943 patch please
Click to expand...
Click to collapse
This is exacly what i said... How to create the package step by step to the C6943. I just don't have how now to make the update. zip already done.
alexandre221 said:
This is exacly what i said... How to create the package step by step to the C6943. I just don't have how now to make the update. zip already done.
Click to expand...
Click to collapse
But, It's very difficult
dstrikersZ1 said:
But, It's very difficult
Click to expand...
Click to collapse
it's not dificult, just have a lot of steps cause i explained in details.
Hey @alexandre221 could you successfully create the deodex flashable zip? I tried here but something is going wrong
Can you tell me what's DTV ?
DIGITAL TV, exclusive function of the C6943
I´ve a custom kernel(trinity kernel) installed, this guide works with it? Will I lose the trinity kernel?
by the way, DTV is Digital TV.
dstrikersZ1 said:
Can you tell me what's DTV ?
Click to expand...
Click to collapse
DIGITAL TV, exclusive function of the C6943
jowjony said:
Hey @alexandre221 could you successfully create the deodex flashable zip? I tried here but something is going wrong
Click to expand...
Click to collapse
i've seeing that some users are relating some problems with this tool to deodex on this firmware version, you can try this other tool too, tell me if works properly, by the way, before you try to deodex, you followed all the steps on my guide since the beggining, creating the FTF, FLASHING AND ETC... ?
sergiopa said:
I´ve a custom kernel(trinity kernel) installed, this guide works with it? Will I lose the trinity kernel?
by the way, DTV is Digital TV.
Click to expand...
Click to collapse
yep, you gonna lost your custom kernel, maybe when you gonna flash the FTF with flashtool you can exclude the kernel from the flashing process, which i really don't recomend, but the FTF have a new whole system, this include a new kernel that btw you gonna have to change and rechange on the root process for this version on the step 3, so i can't confirm to you once that i never changed my kernel and not even unlocked my bootloader, in my opinion, if you keep wanting a custom kernel, you should do the whole process and after that you would install your custom kernel back, I think it would be less risky and easier
alexandre221 said:
i've seeing that some users are relating some problems with this tool to deodex on this firmware version, you can try this other tool too, tell me if works properly, by the way, before you try to deodex, you followed all the steps on my guide since the beggining, creating the FTF, FLASHING AND ETC... ?
Click to expand...
Click to collapse
Nope I didn't, I only want to move to 157 if I'm sure it can be deodexed. So I'm trying to make a flashable deodex patch before moving to 157. I hope @RHBH can help us with that da uma força ae brow! Valew!
jowjony said:
Nope I didn't, I only want to move to 157 if I'm sure it can be deodexed. So I'm trying to make a flashable deodex patch before moving to 157. I hope @RHBH can help us with that da uma força ae brow! Valew!
Click to expand...
Click to collapse
cara então como que você tentou deodexar se primeiro você precisa ter a ROM .157 instalada pra ai sim usar a ferramenta do tutorial, tu instala o firmware no z1 executa a ferramenta para deodexar conecta o celular no pc ja roteado e com usb debug e ai sim a ferramenta vai copiar os aplicativos do sistema do celular para deodexar e criar o arquivo zipado para depois dar flash pelo recovery sendo do mesmo jeito para a outra ferramenta para esse mesmo processo caso a primeira nao funcione.... e realmente o @RHBH sumiu da cena, ele sempre fazia os zips deodexados, por ele nao fazer pra esta versão decidi iniciar esse tópico
Hello all!
I'm not gone... Just dedicated to my work... I'll deodex this for you guys, didn't know about this new FW, what changed from .108 to .157?
Regards,
RHBH said:
Hello all!
I'm not gone... Just dedicated to my work... I'll deodex this for you guys, didn't know about this new FW, what changed from .108 to .157?
Regards,
Click to expand...
Click to collapse
Thank you very much @RHBH I hope this update make the Z1 better so maybe I can wait for Z5 lol Aeeeew valeu, espero que de certo quem sabe o z1 fica melhor e de pra aguentar até o Z5
jowjony said:
Thank you very much @RHBH I hope this update make the Z1 better so maybe I can wait for Z5 lol Aeeeew valeu, espero que de certo quem sabe o z1 fica melhor e de pra aguentar até o Z5
Click to expand...
Click to collapse
I just bought a Z3, people are saying that with Z4 Sony will stop their 6-month flasgship cycle, if this is true Z5 only in 2016.
Tem outras formas de copiar o conteúdo da rom sem ela estar instalada, e assim eu tentei o deodex mas dava erro e o meu medo seja tentar instalar esse deodex que deu erro e travar tudo igual já fiz uma vez ! Mas com a ajuda do @RHBH vou sem medo, instalei todos os deodex que ele criou e tudo funfa 100% xD
jowjony said:
Tem outras formas de copiar o conteúdo da rom sem ela estar instalada, e assim eu tentei o deodex mas dava erro e o meu medo seja tentar instalar esse deodex que deu erro e travar tudo igual já fiz uma vez ! Mas com a ajuda do @RHBH vou sem medo, instalei todos os deodex que ele criou e tudo funfa 100% xD
Click to expand...
Click to collapse
que metodo que você usa ? gostaria de saber
RHBH said:
Hello all!
I'm not gone... Just dedicated to my work... I'll deodex this for you guys, didn't know about this new FW, what changed from .108 to .157?
Regards,
Click to expand...
Click to collapse
wow, thanks dude =D, your presence here is really unexpected hahah, we all will be waiting for your version of this firm, i have tried to contact you and the people on the brasildroid forum to help with this new version, cause that forum always have good tutorials for the Z1, but the forum seems really dead, so i decided to try to make this guide for my own.
Hello I'm from Ecuador I wanted to expose my MOD.
SUPERNOVA S8 V4.1
Arrangement
Mirror Link
UHQ
Language in shutdown menu
Integrated
Air Command
Using data in the notification curtain
DOWNLOAD ROM
https://mega.nz/#!gwwSQDhI!bnSPyumcfxX4zRz6h4SBhrjcWxKUhk51bj6Vw6cdQvI
Credits
@TheFlash for your FlashKernel v2
SupernovaS8(J7PRO)
Download ROM
https://mega.nz/#!kwxyXCra!9fG6rEXGJt2nekiu6w2t5P0aLn8rHdcJNLy5uho2HHI
Reinicio Avanzado en ESPAÑOL
https://mega.nz/#!cpwnALDa!9shpJ86OOnPaAgMaJ7YaBJG2gEYiUZGkdXhZJUcrVDo
Advanced Restart in ENGLISH
https://mega.nz/#!tpZTmKiB!xrrH56ZAJKBcFwBOkRXGQKas9gRtiPBQXuuzuJj8eHI
SupernovaS8 V4 PRO
Rom Control
https://mega.nz/#!dpQSHZqa!Tih1i5siTPhICB2VyNdMt2uL5XHLbXZ8XaU8eECADC0
AirCommand
https://mega.nz/#!s8phgSya!ObzQLUnJNvZT5cxEQemSs_yTcjXRwDt5rrIHfjKeg6k
EdgePanels
https://mega.nz/#!Jxog2Z7D!xH7N_5gL3XV3WE1Dfhyi1F1gI_rgulaXDRDKKKWD5j4
ScreenRecorder
https://mega.nz/#!kwhwCAKC!yhZJd_5PtTETqMkS3fOraHSu6Mv8MmD1VN0ukLWlC58
SuperNovaLight (FINAL-MM)
Download ROM
https://mega.nz/#!UhZliTiK!IuvI-I3MOO72Fy2E-wFybSsFc-1jAFPp3TeheGS92Rg
AirCommand
https://mega.nz/#!s8phgSya!ObzQLUnJNvZT5cxEQemSs_yTcjXRwDt5rrIHfjKeg6k
EdgePanels
https://mega.nz/#!Jxog2Z7D!xH7N_5gL3XV3WE1Dfhyi1F1gI_rgulaXDRDKKKWD5j4
AirMessages
https://mega.nz/#!h9hjwDTa!l8ouKkmuDJz1crX2B3CiD1SjPHuyyDhGlweE6KaS41o
Notes&VoiceNote
https://mega.nz/#!98wljKzR!MzmLXh2U7XoAH9LKC12_Pau8DQScML83BxjFNCaqE-s
SVoice
https://mega.nz/#!JlBwRYLS!f-kBaXXmr-w2MjoS_xuHl0rNKH1wgXHLUmyECdgaDMI
VoLTE
https://mega.nz/#!x0xWgJSL!ueoHoXg2ga-8y7BD8pA8h2NPdLc6Ojy6KAOp3m9BPdQ
Dolby Atmos(Install all)
https://mega.nz/#F!k4gDUAbS!8s1Ky9FsBUuthT_cyYUe0g
Reinicio Avanzado en ESPAÑOL(SuperNovaLight)
https://mega.nz/#!ckhHCDia!OtNMzw_38mYaairo4nB6QAmAk7ZhYDTPdNz3LvVH_do
Advanced Restart in ENGLISH(SuperNovaLight)
https://mega.nz/#!xlggHY6B!G3IoT9xUvxn2Y9WMW8V0Dj3ko4E7kGu-a1AQZL6PaCw
IMAGES OF Light FINAL MM
Excellent work brother and thank you for sharing with us!
Hi I just tested your ROM on my J710FN, works very well!
THANK YOU BEAUTIFUL WORK !!
How to changed weather font s8
jochester said:
How to changed weather font s8
Click to expand...
Click to collapse
Settings, display, font.
I Can flash this on Stock ROM?
Hello, to go from version 1 to 2, how to install? Wipe?
THANKS
Does lockscreen pattern work in this version???
xoloq said:
Does lockscreen pattern work in this version???
Click to expand...
Click to collapse
YES
CHRISFR91 said:
Hello, to go from version 1 to 2, how to install? Wipe?
THANKS
Click to expand...
Click to collapse
Wipe
husen4u said:
I Can flash this on Stock ROM?
Click to expand...
Click to collapse
Mmmm no
Does screen mirroring work? (Funciona screen mirror?). Saludos.!
I flash this rom dont know if its version 1 or 2 but the lock screen is not working patern and the other 2, the only thng that i can use is swip if i use the patter or the pin or password it will stuck on lockscreen cant get trough the home screen
---------- Post added at 12:18 AM ---------- Previous post was at 12:17 AM ----------
Verything is good thats the only problem ive encountered
Can you make secure folder working and also font of clock in lockscreen ?
Si instalo sobre la Evo Grace, debo hacer full wipe o solo wipe cache? Gracias de antemano hermano saludos desde Bolivia
felicidades hermano! que tal la camara? señal? funciona todo? ando con ganas de probar algo para mi j7 2016 MN. estoy en stock ahora. buscaba algo no touchwiz, algo de android puro. si puedo probare tu rom, porque esta excelente a simple vista..
SUPERNOVA S8 (V2)
Thank you! Your ROM is wonderful:good:
Que tal bro, yo tambien soy de Ecuador un saludo, tengo 14 años y me encanta esto de las roms
DGCM7 said:
Hello I'm from Ecuador I wanted to expose my MOD.
I made my own MOD of Evo Grace v1.3.5, I called SUPERNOVA S8 for J7 2016, here is my version N ° 1
https://drive.google.com/file/d/0B5WS0md_rpmRb2VMQi1LY1hVZU0/view?usp=drivesdk
MOD for my J710MN, test it
SUPERNOVA S8 (V2)
Source S8
NOUGAT Notifications
Calculator S8
Calling S8
S8 Wallpapers HD
ETC....
DOWNLOAD ROM
https://drive.google.com/file/d/0B5WS0md_rpmRaDNGSmQ0QURkSlU/view?usp=drivesdk
Here is my V2 of my MOD, GREETINGS FROM ECUADOR
Click to expand...
Click to collapse
Gr8 work bro?
You Are in 4pad member??
YOU HAVE CALL FOR BUILDING A ROM 7.0 NOUGAT FOR GALAXY J7 BASED ON A510F STOCK HAS BEEN UPDATE
https://www.sammobile.com/firmwares/galaxy-a5-2016/SM-A510F/SER/download/A510FXXU4CQDK/130417/
Introducing to MhDzMR kernel for MOTO E4 (woods)
Code:
/* *
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers. * */
Kernel features:
Build with Latest Linaro GCC-7.5-2019.12 arm-eabi toolchain
Systemless installer (doesn't touch system partition, OTA friendly), AnyKernel3 backend (compatible with autoflash apps)
Enhanced TCP Congestion Algorithm (set default Westwood), and Network tweaks
Several I/O control tweaks, added many schedulers (Default is CFQ with custom modified values)
ZRAM Swap (LZ4) and adaptive LMK on by default.
KCAL - Advanced color control for MTK. Use EX Kernel Manager for modify the values.
Enabled USB Fast Charge & Increased AC/USB Charging. & Thunder charge controller
Battery-Charging LED control
FS fsync toggle on/off
Compatible with Kernel Adiutor , EXKM , FKM, and others
Latest WireGuard Support - 0.0.20200205. You can install the WireGuard Android Client from Play Store : Link
Module Load and Unload Support.
Support for External WIFI Adapter Realtek (rtl8192c*, rtl8187 ..) & Ralink(rt2800, rt2500, rt73 ..).
Thunder plug & Alucard Hot plug driver
Thunder Quake Vibrator Engine
cpu Boost & early suspend driver
Boeffla wake lock blocker
MhDzMR-Kernel Change log (v5.0-stable) (27/05/2021)
Change log:
Upstream the Linux to 3.18.140
Thunder plug & Alucard Hot plug driver
Thunder Quake Vibrator Engine
CPU Boost & early suspend driver
Boeffla wake lock blocker
Stability and performance Increase
Click to expand...
Click to collapse
Installation:
1)BACKUP Always get a recent system backup when flashing anything.
2) Download the zip from the link below and flash from TWRP.
Download:
Note:
MhDZmR-5.0-woods-Darklos.zip only for dark lineage Rom
MhDZmR-5.0-woods-Stock.zip for Stock & Old Custom Rom
Version 5.0
Link = Click here
Version 4.0
Link = Click here
Version 3.0-stable
Link = Click here
Version 2.0
Link = Click here
Version: 1.4
Link = Click here
version: 1.2
Link = Click here
Please give feedback. I hope it improves your experience.:fingers-crossed:
Credits:*
@RebelLion_
@iykeDROID™
@SamarV-121
@manjuyashu
@Hector ayala
@osm0sis
@eng.stk
@kobridge
@sunilpaulmathew
If you like my work, donations are always welcome.
Paypal Email:[email protected]
Don't make my effort meaningless. Thumbs Up. it is Free of Charge.
XDA:DevDB Information
MhDzMR-Kernel, Kernel for the Moto E4
Contributors
Zumairmhd
Source Code: https://github.com/mhdzumair/MhDzMR-kernel.git
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v5.0
Stable Release Date: 2021-05-27
Created: 10/05/2019
Last Updated: 27/05/2021
when I go to install of error 1 in twrp
Zeno Br said:
when I go to install of error 1 in twrp
Click to expand...
Click to collapse
Use unofficial twrp recovery 3.2.1 made by iyki
Zumairmhd said:
Use unofficial twrp recovery 3.2.1 made by iyki
Click to expand...
Click to collapse
still with the same error I already installed twrp 3.2.1 unofficial made by iyke
Eu recomendo
Galera eu recomendo, ajudou bastante , eu tô usando na stock ROM original em , imagina em custom rom
Meu moto e4 Xt1763 tá top , para baixa basta vc baixa e instalar o twrp unofficial 3.2.1...
Tô ansioso para novas atualizações !
Thanks for that, it's good to see that Woods development didn't stop completely
, sempre estou de olho todos os dias eu olho pra ver se saiu algo novo, ainda tenho esperança que sim k
finally managed to install, so fantastic this kernel. congratulations to the developer. hope to have but update
Preciso de uma ajuda ;-;
Vitoor43200 said:
Galera eu recomendo, ajudou bastante , eu tô usando na stock ROM original em , imagina em custom rom
Meu moto e4 Xt1763 tá top , para baixa basta vc baixa e instalar o twrp unofficial 3.2.1...
Tô ansioso para novas atualizações !
Click to expand...
Click to collapse
Olá gostaria de perguntar uma coisa!! Houve um tempo que eu desbloquiei o bootloader do meu moto e4 xt1763 fiz root e fiquei usando por um tempo,. Ai enjoei e reinstalei a ROM stock de novo,. Eu queria saber se ao reinstalar a rom stock o bootloader bloqueia ou não?? Lembrando que toda vez que eu ligo ele, aparece uma msg "device unlocked"
Sim, meu amigo, tem como sim você instala a rom stock sim, o bootloader bloquear sim, caso queira desbloquear você vai ter que fazer os procedimentos de desbloqueo de novo,
Vitoor43200 said:
Sim, meu amigo, tem como sim você instala a rom stock sim, o bootloader bloquear sim, caso queira desbloquear você vai ter que fazer os procedimentos de desbloqueo de novo,
Click to expand...
Click to collapse
Obrigado amigo,. Eu só fiquei com essa dúvida ai, pq mesmo eu instalando a stock rom,. Aparece uma msg na tela "Divice unlocked"
---------- Post added at 04:16 AM ---------- Previous post was at 04:13 AM ----------
Vitoor43200 said:
, sempre estou de olho todos os dias eu olho pra ver se saiu algo novo, ainda tenho esperança que sim k
Click to expand...
Click to collapse
Ola amigo, gostaria de saber qual foi as melhorias que vc notou com esse kernel
Zeno Br said:
finally managed to install, so fantastic this kernel. congratulations to the developer. hope to have but update
Click to expand...
Click to collapse
I'm so happy to hear. Im still on woods. so ill update it.
Zumairmhd said:
Introducing to MhDzMR kernel for MOTO E4 (woods)
Click to expand...
Click to collapse
The installation was no brainer but still seems to require more work..
*Battery Drain very high
*Don't see any fast charge comparison same
As last 2.5 min for 1 %
Hate to say but uninstalled it to save trouble to charge again from zero next morning
Abish4i said:
The installation was no brainer but still seems to require more work..
*Battery Drain very high
*Don't see any fast charge comparison same
As last 2.5 min for 1 %
Hate to say but uninstalled it to save trouble to charge again from zero next morning
Click to expand...
Click to collapse
I know there are a lot of power issues in v4.0. I was re working woods kernel since this last week I was able to make huge changes. To make it stable and smooth. Ill hope to release a new version with more new features and some features are removed. I'll hope you will enjoy it. Thanks
Zumairmhd said:
I know there are a lot of power issues in v4.0. I'll hope to release a new version with more new features and some features are removed. I'll hope you will enjoy it. Thanks
Click to expand...
Click to collapse
Maybe its led cuz there is bezel backpanel led too
Only visible in pitch dark .. (if no trouble disable it)
Kernel by thehitman was much stable than this.. ask if he can help :good:
Abish4i said:
Maybe its led cuz there is bezel backpanel led too
Only visible in pitch dark .. (if no trouble disable it)
Kernel by thehitman was much stable than this.. ask if he can help :good:
Click to expand...
Click to collapse
I already said I was totally re-base the kernel to NMA26.42-169 and pick up needed features.
Where is the bezel back panel led? In woods there is one white led in front that is control by mt65xx led driver.
Zumairmhd said:
Where is the bezel back panel led? In woods there is
Click to expand...
Click to collapse
Check it in a dark room when led is turned on the bezel also lit up .. its cool but consumes allot of juice..
Abish4i said:
Check it in a dark room when led is turned on the bezel also lit up .. its cool but consumes allot of juice..
Click to expand...
Click to collapse
What is your model number? Mine is XT1762. And why don't you join our moto e4 & e4 plus telegram group. Click this link to join the group Moto E4&E4_Plus_Custom_Roms
Devlopment of New ? Stable Update - When can we expect it ?
Kernel Module Request
deserteagle-blog.blogspot.com/2012/09/guida-come-risolvere-incompatibilita.htm
Look at this link, I Want an App WIFIPPPOE.apk to work on this kernel since they are disabled after Android 4.4 on all devices.
I tested this mod on an old Tablet and it connects to PPPoE. > Android 4.4.2. :fingers-crossed: :good:
Guys, I DID IT !!!!
Working Samsung A52s (SM-A528B/DS) with Unlocked Bootloader, Rooted (Magisk), Passing SafetyNet and WORKING CAMERA (yaaay).
Problem is that I have no idea how I did it, because it was 3 days of flashing, patching, reinstalling and phone bricking too (unfortunately).
I am attaching a screenshot I did with the phone while writing this post in Word. Someone wanted screenshots in split screen as a proof so.. boom, here ya go.
I have a lot of pictures that I made in last 3 days, so I will try to write some more detailed instructions soon. But now at least try this:
This should work for anyone, even people without working camera after unlocking bootloader
1. Download latest Firmware and Odin from samfw.com (don’t know why but these was only one that worked for me, bricked my phone earlier with different fw)
2. Unpack downloaded firmware and copy AP to a phone with Magisk 24.1
3. Use Magisk app to patch the AP file and download it back to PC
4. Unlock bootloader (first in developer settings, then in the download mode)
5. Reboot
6. Go to Download mode (You should see OEM: OFF (U))
7. Flash with Odin all the Firmware files you downloaded, but to AP put the patched file
8. Reboot
9. Go to magisk, do what he wants, reboot, in settings activate seamless host, activate Zygisk, reboot, download and install module kdrag0n’s safetynet-fix v2.2.1 (https://github.com/kdrag0n/safetynet-fix/releases)
10. reboot
11. yaaay
UPDATE: Ok, It seems that the Camera software will fail after reboot once. When you close it and open it again, it works.
CONFIRMED: I had to reflash after trying some TWRP and now I can confirm that patching the "safetynet-fix v2.2.1" will allow you to use the camera after one run. The Samsung Cam App will fail on the first run, so when you kill it in the app switcher and run again, it works in a normal way (switching cameras, front/back and everyhing).
reserved
Arobase40 said:
Ok, I feel happy for you you succeeded to root your phone with your camera working and you pass the SafetyNet test by activating Zygist with safetynet-fix v2.2.1, but what have you done differently from my guide as you as you just got updated information from my thread ?
You passed SafetyNet test and so what next ???
Have you got Samsung Secure Folder, Samsung Health or Samsung Pay working or such other protected Samsung apps ???
Are you getting Xprivacylua or AfWall+ (may be this one but not sure) working ???
Firefds kit [R] is not yet update to be compatible with Android 12, so it only partially works...
On my Galaxy Note 9, I didn't pass SafetyNet test, but Samsung Secure Folder, Google pay, Samsung Health are fully working... ^^
Samsung Pay is working but only with a Samsung Watch...
With another configuration I passed SafetyNet test but all above apps aren't working at all !!! ^^
I don't mind you created another thread and another guide on how to root the A528B but what is the interest if you don't explain how you improved mine and what new features you got ???
Click to expand...
Click to collapse
A. I didn't read your guide since your guide openly says it doesn't work with camera
B. I needed camera so I created my own guide where the camera works and it is here for everyone to read
testestestest said:
Guys, I DID IT !!!!
Working Samsung A52s (SM-A528B/DS) with Unlocked Bootloader, Rooted (Magisk), Passing SafetyNet and WORKING CAMERA (yaaay).
Problem is that I have no idea how I did it, because it was 3 days of flashing, patching, reinstalling and phone bricking too (unfortunately).
I am attaching a screenshot I did with the phone while writing this post in Word. Someone wanted screenshots in split screen as a proof so.. boom, here ya go.
I have a lot of pictures that I made in last 3 days, so I will try to write some more detailed instructions soon. But now at least try this:
This should work for anyone, even people without working camera after unlocking bootloader
1. Download latest Firmware and Odin from samfw.com (don’t know why but these was only one that worked for me, bricked my phone earlier with different fw)
2. Unpack downloaded firmware and copy AP to a phone with Magisk 24.1
3. Use Magisk app to patch the AP file and download it back to PC
4. Unlock bootloader (first in developer settings, then in the download mode)
5. Reboot
6. Go to Download mode (You should see OEM: OFF (U))
7. Flash with Odin all the Firmware files you downloaded, but to AP put the patched file
8. Reboot
9. Go to magisk, do what he wants, reboot, in settings activate seamless host, activate Zygisk, reboot, download and install module kdrag0n’s safetynet-fix v2.2.1 (https://github.com/kdrag0n/safetynet-fix/releases)
10. reboot
11. yaaay
UPDATE: Ok, It seems that the Camera software will fail after reboot once. When you close it and open it again, it works.
CONFIRMED: I had to reflash after trying some TWRP and now I can confirm that patching the "safetynet-fix v2.2.1" will allow you to use the camera after one run. The Samsung Cam App will fail on the first run, so when you kill it in the app switcher and run again, it works in a normal way (switching cameras, front/back and everyhing).
Click to expand...
Click to collapse
Ok, I confirm this works!! Way to go sir. Thanks so much and I encourage everyone to do this method. WooHoo
Arobase40 said:
Ok but does it changes anything since my post #218 of my own guide ?
Click to expand...
Click to collapse
not that i can tell
Arobase40 said:
UPDATED : How to root Galaxy A52S 5G (SM-A528B)
This is a highly updated tutorial on how to root the Galaxy A52S 5G (SM-A528B) phone based on new version of Magisk and from feedbacks I received from users after the release of the first guide version ! ;) This guide should work with other...
forum.xda-developers.com
As I was myself trying to use Zygist with SafetyNet 2.2.1 version even though I didn't mention it explicitely as Safetynet 2.2.1 is only working with Zygist ?
"Ok, nice try mate but Zygisk-LSPosed is even worse !!!
It broke FoxMagiskModuleManager when Zygisk-LSPosed has very poor modules list. It broke AfWall+ and it partially broke Firefds kit and no progress at all with Samsung apps !!!"
Does this still apply ?
Click to expand...
Click to collapse
yes as far as lsposed goes, never used the fox app or afwall so can't say. no gravity box for android 12 yet
Arobase40 said:
So that means that since my post #218 no one with failed camera has installed SafetyNet Fix 2.2.1 with Zygist and no one has checked if that has an impact on the camera, and thus no report to me ??? lol
I just remind you that my camera has always been working so I couldn't expected any changes on this aspect... ^^
Finally, if my guide offered "limited root", this one offers even more limited one as with the exception of AdAway what this root stands for if you can't at least protect your privacy ???
Click to expand...
Click to collapse
you are lucky enough to be in a region that allows the camera to function while boot loader is unlocked
One thing I've noticed, after a restart the camera fails until closing it and killing the app in recent apps, then it works.
testestestest said:
Guys, I DID IT !!!!
Working Samsung A52s (SM-A528B/DS) with Unlocked Bootloader, Rooted (Magisk), Passing SafetyNet and WORKING CAMERA (yaaay).
Problem is that I have no idea how I did it, because it was 3 days of flashing, patching, reinstalling and phone bricking too (unfortunately).
I am attaching a screenshot I did with the phone while writing this post in Word. Someone wanted screenshots in split screen as a proof so.. boom, here ya go.
I have a lot of pictures that I made in last 3 days, so I will try to write some more detailed instructions soon. But now at least try this:
This should work for anyone, even people without working camera after unlocking bootloader
1. Download latest Firmware and Odin from samfw.com (don’t know why but these was only one that worked for me, bricked my phone earlier with different fw)
2. Unpack downloaded firmware and copy AP to a phone with Magisk 24.1
3. Use Magisk app to patch the AP file and download it back to PC
4. Unlock bootloader (first in developer settings, then in the download mode)
5. Reboot
6. Go to Download mode (You should see OEM: OFF (U))
7. Flash with Odin all the Firmware files you downloaded, but to AP put the patched file
8. Reboot
9. Go to magisk, do what he wants, reboot, in settings activate seamless host, activate Zygisk, reboot, download and install module kdrag0n’s safetynet-fix v2.2.1 (https://github.com/kdrag0n/safetynet-fix/releases)
10. reboot
11. yaaay
UPDATE: Ok, It seems that the Camera software will fail after reboot once. When you close it and open it again, it works.
CONFIRMED: I had to reflash after trying some TWRP and now I can confirm that patching the "safetynet-fix v2.2.1" will allow you to use the camera after one run. The Samsung Cam App will fail on the first run, so when you kill it in the app switcher and run again, it works in a normal way (switching cameras, front/back and everyhing).
Click to expand...
Click to collapse
thank you very much )))) I will try this weekend!
Guys, can anybody explain to me , why Samsung is apparently making it so hard for the customers to root their devices? Is it a problem with Samsung or with Magisk, or both?
Not being able to root via Magisk is a real dealbreaker to this otherwise well-specced phone (at least it is to me!).
Going to try this method with Android 11 using Magisk 24.3 and safety net 2.2.1 which I hope will allow the camera to work also.
Edit: It works with android 11.
Arobase40 said:
Why wouldn't it work with Android 11 as it is not related ???
You mean you downgraded to Android 11 and got stuck with a very old security patch just to get GravityBox and probably with Firefds Kit [R] working ??? lol
Click to expand...
Click to collapse
Yes, yes and yes. LOL and better battery life too
I've had no bootloops when changing things FireFDS and I'm glad to have a working gravity box... I'll report battery after a few days.
testestestest said:
Guys, I DID IT !!!!
Click to expand...
Click to collapse
Hi, I'm new here and I bought the A528B, I don't speak English and I use google translate... maybe this is asking too much but a step by step video would be too much to ask? having to translate it costs me a lot trying to follow the guide...
I don't understand how I have to do to be able to root it and have the camera working
bobfrantic said:
Ok, confirmo que esto funciona!! Bien hecho señor. Muchas gracias y animo a todos a hacer Desbloquee el gestor de arranque (primero en la configuración del desarrollador, luego en el modo de descarga)
Click to expand...
Click to collapse
testestestest said:
Chicos, LO HICE!!!!
Samsung A52s (SM-A528B/DS) en funcionamiento con cargador de arranque desbloqueado, rooteado (Magisk), pasando SafetyNet y CÁMARA DE TRABAJO (yaaay).
El problema es que no tengo idea de cómo lo hice, porque fueron 3 días de flashear, parchear, reinstalar y bloquear el teléfono también (desafortunadamente).
Adjunto una captura de pantalla que hice con el teléfono mientras escribía esta publicación en Word. Alguien quería capturas de pantalla en pantalla dividida como prueba, así que... boom, aquí tienes.
Tengo muchas fotos que hice en los últimos 3 días, así que intentaré escribir algunas instrucciones más detalladas pronto. Pero ahora al menos prueba esto:
Esto debería funcionar para cualquier persona, incluso para las personas que no tendrán una cámara en funcionamiento después de desbloquear el gestor de arranque.
1. Descargue el último firmware y Odin de samfw.com (no sé por qué, pero estos fueron solo uno que se cubrieron para mí, bloquearon mi teléfono antes con un firmware diferente)
2. Descomprima el firmware descargado y copie AP a un teléfono con Magisk 24.1
3. Use la aplicación Magisk para parchear el archivo AP y descárguelo nuevamente a la PC
4. Desbloquee el cargador de arranque (primero en la configuración del desarrollador, luego en el modo de descarga)
5. Reiniciar
6. Vaya al modo de descarga (debería ver OEM: APAGADO (U))
7. Flashee con Odin todos los archivos de Firmware que descargó, pero a AP puso el archivo parcheado
8. Reiniciar
9. Vaya a magisk, haga lo que quiera, reinicie, en la configuración active el host integrado, active Zygisk, reinicie, descargue e instale el módulo kdrag0n's safetynet-fix v2.2.1 ( https://github.com/kdrag0n/safetynet -fix/ lanzamientos )
10. reiniciar
11. siiii
ACTUALIZACIÓN: Ok, parece que el software de la cámara fallará después de reiniciar una vez. Cuando lo cierras y lo abres de nuevo, funciona.
CONFIRMADO: Tuve que volver a flashear después de probar TWRP y ahora puedo confirmar que parchear "safetynet-fix v2.2.1" te permitirá usar la cámara después de una ejecución. La aplicación Samsung Cam fallará en la primera ejecución, por lo que cuando la elimine en el conmutador de aplicaciones y vuelva a ejecutarla, funcionará de manera normal (cambiando de cámara, frontal/trasera y todo).
Click to expand...
Click to collapse
EL DESBLOQUEO DE ARRANQUE ES ANTES O DESPUES DE PARCHEAR EL AP
Do I really need to patch whole AP?
Tried with only boot, vbmeta, vendor and dtbo, but bootloop was the only result.
ch3mn3y said:
Do I really need to patch whole AP?
Tried with only boot, vbmeta, vendor and dtbo, but bootloop was the only result.
Click to expand...
Click to collapse
Well then, there you go. You got bootloop for not following the instructions
Did i understand right?
2. Unpack downloaded firmware and copy AP to a phone with Magisk 24.1
3. Use Magisk app to patch the AP file and download it back to PC
Click to expand...
Click to collapse
These steps are requiring a mobile with Magisk installed on it to patch the AP?
If yes, is there any other option, if i have only a A52s 5G ?
luffy786 said:
Did i understand right?
These steps are requiring a mobile with Magisk installed on it to patch the AP?
If yes, is there any other option, if i have only a A52s 5G ?
Click to expand...
Click to collapse
You can install the Magisk app without being rooted. It's an app like any other app, you simply won't have root access. So install it on your A52s 5G and patch your files with it.
Guys can someone remind me what i need to do to make smartview working? I need to hide something from root?
BlueChris said:
Guys can someone remind me what i need to do to make smartview working? I need to hide something from root?
Click to expand...
Click to collapse
Well, I added these 2 lines:
wlan.wfd.hdcp=disable
wifi.interface=wlan0
On the following files:
product/etc/build.prop
system/build.prop
system/system_ext/etc/build.prop
vendor/build.prop
vendor/default.prop
I'm pretty sure not all of them are needed but I'm too lazy to figure out which prop file really needs it lmao if I had to take a guess I'd say either vendor build.prop or default.prop, who knows.