Magisk hide is not working on mobikwik app. I had selected option to hide root on mobikwik app but its not hiding. Because of root I am not able to open app.
Same with TeZ for me.
Have you ticked mobikwik in magisk hide. After doing so, mobikwik works fine for me.
It was not working for me but then I ticked Mobikwik in Magisk Hide and now it's working.
check whether you are passing safety Net status , + there is no unverified status showing in Play store. and your kernel is enforcing then only you can run apps which are checking root.
Related
Ive installed few Magisk (v.11.1 on Viper ROM) modules (ViPERAndroid FX, GPEDialer) but none of them shows in application list although those modules are shown correctly in Magisk module manager.
What can cause this?
Same problem
It's been a while since I last rooted my 7t. Current oos 10.3.6. Magisk manager v8.0.3. Magisk was 20.4 I think.
So fetch rewards app detected root. I went to add the app to the magisk hide, cleared fetch rewards storage and still root was detected. Tried to run the rename option in the magisk settings but it appears to hang during the process. Phone screen timed out and when I get back into it, the hide magisk manager status pop up was still there. Rebooted the phone, went back to magisk manager. While magisk manager shows it's still installed, magisk is not. Safety net checks still passed.
To reinstall magisk, I need to get the patched oos image, correct?
Thanks
Hi
Think from the magisk manager app you would just install to inactive slot and reboot?
Refer to the Magisk root for 7T thread for patched boot image and instructions.
When I installed a root checker, it showed that I'm still rooted.
All this started when I used the Magisk function to repackage magisk's file name in an attempt to hide it from Fetch Rewards.
noodlenoggan said:
When I installed a root checker, it showed that I'm still rooted.
All this started when I used the Magisk function to repackage magisk's file name in an attempt to hide it from Fetch Rewards.
Click to expand...
Click to collapse
Ok I don't know what I'm missing but I can't seem to find that fetch rewards app in my play store to install and test at my end. Second, Magisk isn't installed according to you manager screenshot... So I'm at a loss. But their are threads better able to assist your efforts to have Magisk root up and running first cause I not knowledgeable enough to state why your root check detects root yet the manager does not indicate root installed.
But I'll hopefully be of more help and provide you this:
https://forum.xda-developers.com/oneplus-7t/how-to/guide-how-to-root-oneplus-7t-twrp-t3979307
So I'll copy and paste from the link above:
HOW TO UPDATE a ROM and KEEP ROOT:
Before all Disable all magisk modules
Be sure to use Canary Magisk Manager and Canary Magisk (debug)
You can update a stock rom from phone settings with local upgrade:
- Update the Rom WITHOUT REBOOT;
- Open Magisk Manager;
- In Magisk Manager, click on Install/Install/Direct Install;
- Again in Magisk Manager, click on Install/Install/Inactive Slot;
- Reboot.
So from thier I'd assume you need only the following:
- Open Magisk Manager;
- In Magisk Manager, click on Install/Install/Direct Install;
- Again in Magisk Manager, click on Install/Install/Inactive Slot;
But I am unsure so please verify b4 attempting.
Or may be someone else can confirm here?
Good luck and please consider letting me know how you made out. Thanks
I jumped on the xda magisk support forum and was able to sort out the whole mess I was in.
The android app is called Fetch - Receipts Scanner by Fetch Rewards. It's in Google store.
Hopefully for anyone else that is in the same situation will find their solution as I did below.
What I learned from the Magisk forum and closer examination of my phone were:
- Magisk and Magisk Manager are two separate components. Magisk handles the root and Magisk Manager handles additional root related features. Magisk Manager is not required to have a rooted phone continued to be rooted. I was not aware of this.
- When the repackaging routine was started, Magisk Manager did indeed repackaged and installed itself. There was not indication that the process completed successfully as the spinning progress icon did not stop. I had renamed it MagMan as part of the repackaging routing and was expecting the original icon Magisk icon to show for MagMan. Sorry, I had not read the Magisk Manager instructions and simply made a lot of assumptions of the repackaged process. What happened was that I assumed Magisk Manager would just switch over the new name as part of the repackaging routine. Also I didn't pay close enough attention that the new repackaged app, MagMan, which was literally next to Magisk Manager mainly because it had a generic Android icon instead of the Magisk Manager icon and was overlooked. This whole entire time, I was focusing on the original Magisk Manager app and icon but all of the functionality of Magisk Manager now resided in MagMan. I've uninstalled the original Magisk Manager app and now use the repackaged version.
The Fetch Rewards app was added to the Magisk Hide section via MagMan and it's now working properly.
Thanks for following up.
noodlenoggan said:
Thanks
Click to expand...
Click to collapse
Sweet - glad you have success. Enjoy
I just did more or less the same thing... Hid Magisk manager... Forgot... Flashed full update no prob... Installed new Magisk Manager (along with the previously hidden install of Magisk manager).
Then finally figured out to uninstall the hidden Magisk manager... Then, Magisk manager and was able to install Magisk Root. All good now lol. Glad your up and running.
This worked for me yesterday, but make sure to reboot the phone after doing the "hide magisk" option in Magisk Manager settings. The name also does not have to be "MagMan" it can be anything of your choice.
I also noticed that the proxy app (with blank icon) might not open but if it fails to open just force close it and try again, that seemed to make it open for me.
noodlenoggan said:
I jumped on the xda magisk support forum and was able to sort out the whole mess I was in.
The android app is called Fetch - Receipts Scanner by Fetch Rewards. It's in Google store.
Hopefully for anyone else that is in the same situation will find their solution as I did below.
What I learned from the Magisk forum and closer examination of my phone were:
- Magisk and Magisk Manager are two separate components. Magisk handles the root and Magisk Manager handles additional root related features. Magisk Manager is not required to have a rooted phone continued to be rooted. I was not aware of this.
- When the repackaging routine was started, Magisk Manager did indeed repackaged and installed itself. There was not indication that the process completed successfully as the spinning progress icon did not stop. I had renamed it MagMan as part of the repackaging routing and was expecting the original icon Magisk icon to show for MagMan. Sorry, I had not read the Magisk Manager instructions and simply made a lot of assumptions of the repackaged process. What happened was that I assumed Magisk Manager would just switch over the new name as part of the repackaging routine. Also I didn't pay close enough attention that the new repackaged app, MagMan, which was literally next to Magisk Manager mainly because it had a generic Android icon instead of the Magisk Manager icon and was overlooked. This whole entire time, I was focusing on the original Magisk Manager app and icon but all of the functionality of Magisk Manager now resided in MagMan. I've uninstalled the original Magisk Manager app and now use the repackaged version.
The Fetch Rewards app was added to the Magisk Hide section via MagMan and it's now working properly.
Thanks for following up.
Click to expand...
Click to collapse
This worked for me yesterday on Android 9 (OP5T), but make sure to reboot the phone after doing the "hide magisk" option in Magisk Manager settings. The name of the proxy app also does not have to be "MagMan" it can be anything of your choice.
I also noticed that sometimes the proxy app didn't open and if this occurred I just force closed it and then it seemed to work. Anyways good luck hope it works for someone else
I have a so ( SM-G980F) rooted with EFTsu, and Netflix cant work, reading in the forum I found that Magisk root have a module to solve this.
So my question is, can change the root? or can I install Magisk in my hpone if I rooted with EFTsu ?
me too i wanna
@Toryas
@detcla
Sure you can:
- All your data may be lost (backup it before proceeding)
- Install fresh firmware with Odin, but before you proceed it, patch AP file as I've stated here
- Boot device up and configure it as you're used to do
- Enter Magisk app, Settings, enable MagiskHide and reboot (waaay important step)
- After device reboots, enter Magisk app again just to make sure MagiskHide is enabled
- If you have EdXposed installed, enable 'Pass SafetyNet' setting end reboot again
- Install sefetynet-fix (safetynet-fix-v2.0.0-test2.zip) magisk module from here and reboot
- Enter Magisk app and make sure safetynet checks succeeded
- Clear Play Store app data
- You're done
How to root and pass SafetyNet on Sony Xperia 10 III (XQ-BT52)​Tested on firmware 62.0.A.3.163.
Disclaimer:
This guide assumes you're familiar with the concepts of rooting, Magisk, SafetyNet, fastboot, adb and so on. I will explain why things are done but if I explained everything it would become too long.
This guide is limited to getting root and apps working on the stock Sony ROM. It doesn't cover installing other ROMs.
You can mess up your phone if you don't know what you're doing. This is not a beginner's guide.
Before you do anything else, do these preparations:
Make sure your device is updated to the latest firmware. Getting updates after you unlock the bootloader will be more complicated.
Use XperiFirm to grab a copy of your current firmware (after you've updated it). It can run on Linux too, either via Mono or in a virtual machine. It's basically just a downloader, it doesn't need any fancy hardware access.
Screenshot everything under Settings > System.
Open the dialer and enter *#*#7378423#*#*. Screenshot everything in the service submenus.
Unlock developer options (tap Settings > About > Build number 7 times) then find it under Settings > System > Advanced. Activate USB debugging. Activate OEM unlocking.
Install the Android SDK Platform Tools. On Linux they're most likely in a package provided by your distro.
Copy the screenshots to your PC because the phone will be reset at some point.
Boot into fastboot by turning the phone off, then connect it to PC via USB, and press POWER and VOLUME UP together. The phone led will turn blue. On PC run fastboot devices and make sure it lists your phone and has the serial number you got from the service menu.
Unlocking the bootloader:
This is the point of no return as far as warranty is concerned!
This will factory reset the phone! Make sure you got everything you needed off it.
Obtain the unlock code (you will need the IMEI of the 1st SIM slot).
Boot into fastboot, check again that fastboot devices lists the phone.
Issue the unlock command using the code you got earlier: fastboot oem unlock 0x<unlock code here>
Reboot the phone (you can say fastboot reboot). It will say "can't check for corruption" and "erasing" a couple of times but will eventually boot up to the factory setup.
Enabling Magisk & root:
Download the latest Magisk apk to the phone and install it. Right now that means v24+.
Open boot_X-FLASH-ALL-8A63.sin from the original firmware with any archive manager (it's a tar.xz), 7zip will work fine.
Extract boot.000, rename it to boot.img and put it on the phone.
Open the Magisk app, next to "Magisk" tap "install", choose "Select and patch a file", pick the "boot.img" file.
Download the patched img to PC (will be next to boot.img called something like magisk_patched-24100_MKPRJ.img).
Boot into fastboot, check again that fastboot devices lists the phone.
Flash the patched boot image: fastboot flash boot magisk_patched-24100_MKPRJ.img
Must say OKAY. Can then reboot the phone (you can say fastboot reboot).
Open the Magisk app again, it should say "installed" now next to "Magisk". Also the Superuser and Modules buttons should now be enabled.
Go into Magisk settings and activate "Hide the Magisk app". This is NOT MagiskHide, it does not hide Magisk from other apps, it hides the Magisk Manager app from other apps. More on this later.
Go into Magisk settings and activate Zygisk. This is a built-in replacement for Riru going forward.
Reboot!
Install a root checker app and verify that you get a prompt from Magisk to give root and that the checker says it got root.
Important changes about Magisk:
Riru is now obsolete. It has been replaced by a feature built-into Magisk called Zygisk (which is essentially Riru running in Zygote). It is strongly recommended to go into Magisk settings and activate Zygisk (even if you don't use Riru modules). Do not install Riru anymore. All modules that needed Riru should have Zygisk versions by now unless they're abandoned.
Magisk no longer maintains a module repository, To find and install modules install Fox's Magisk Module Manager. It's a dedicated module management app that supports the old Magisk repo as well as new ones. Inside Magisk you can still enable/disable/remove/install manually and can also update if the module has an update URL, so you can do without Fox if you get your modules directly from their XDA or GitHub pages.
MagiskHide has been replaced by a new feature called Deny list (it's in Magisk settings). It's much more powerful because the apps & processes added to the deny list will be completely excluded from anything based on Magisk so it's impossible for them to detect leaks anymore. On the downside, excluded apps can't be affected by any Magisk or LSPosed modules (LSPosed will grey out such apps and say "it's on the deny list".) This feature should be used sparingly (see below) because Magisk still does a good job of evading detection.
Passing SafetyNet:
Install YASNAC to check your SafetyNet status. At this point you're probably not passing either Basic or CTS check.
Go into Magisk settings. Enable "Enforce deny list". Enter "Configure deny list", find Google Services, check it, expand it, and select only the process ending in .gms and the one ending in .gms.unstable.
Reboot. Check YASNAC. At this point you should be passing Basic check but probably not CTS.
Install Universal SafetyNet Fix (aka USNF) by kdrag0n in Magisk. (Some GIS ROMs already include what this module does, so if you install a GIS ROM you may not need it.) This module hijacks the CTS verification and drops an error which causes the Google service to fall back to Basic verification, which we already fixed in the previous step.
Reboot. Check YASNAC. At this point you should be passing both Basic and CTS. That's it!
You may need to clear storage & cache for Google Play & Services. Go to Settings > Apps & notifications > See all apps, select "All apps", find them in the list, clear storage/cache and reboot. After that try searching for a restricted app such as Netflix on the Play store, if it shows up in results you're all good.
Remember to also add to deny list other apps that try to detect if you're using root, like banking apps.
Other SafetyNet related fixes:
People using non-stock GIS ROMs will probably need module MagiskHide Props Config by Didgeridoohan. This will install a props command line util that you can use (as root) to force Basic attestation, apply extra Magisk hiding techniques, spoof device fingerprint, change the way fingerprinting is checked, or even impersonate another device altogether. Install, reboot, enter adb shell, type su to go root (will need to grant root to shell on the phone when prompted), then run props and follow the options.
People running extra-stubborn banking apps (or other apps that try to detect root extra-hard) that don't work even when added to the Magisk deny list can try module Shamiko by LSPosed. This module adds extra hiding techniques for the apps on the deny list. Please note that Shamiko will disable the Magisk "enforce deny list" option but that's ok, that's an extra feature, the deny list is in effect even without it.
Working apps and modules​Please note that this list is limited to stuff that I personally use. I can't and won't install other stuff to test it.
Root apps:
AFWall(+): Works, but configure it to use its own internal busybox and iptables. Applying rules fails occasionally and you need to retry.
Call Recorder by skvalex: Recording works out of the box, no fiddling required with either headset of mic recording.
JuiceSSH, Termux etc. and other terminal apps: No issues getting root with su.
Busybox: you can install zgfg's module which exposes Magisk's internal Busybox to the rest of the system (bonus: will be updated with Magisk); or you can install osm0sys's module which contains a standalone separate Busybox. As of now both of them provide Busybox 1.34.
MyBackup Pro: Works fine. Used it to transfer 15k+ SMS messages from Android 8.
Solid Explorer: Can access root partitions without issues.
Tasker: No issues.
Titanium Backup: Works but will hang when restoring APKs whose target API doesn't support the ROM's Android version (ie. APKs you can't install directly either).
OAndBackupX: Modern alternative to Titanium, works perfectly.
XPERI+: Version 6 works well and allows you to remap the assistant button and has another couple of features. Version 7 crashes.
Magisk modules:
AFWall Boot AntiLeak
Backup
Builtin BusyBox
Magisk Bootloop Protector
MagiskHide Props Config
Shamiko
SQLite for ARM aarch64 devices
Systemless Hosts (comes with Magisk, enable it in settings)
Universal SafetyNet Fix
Zygisk LSPosed
LSPosed modules:
App Settings Reborn: Works well. May require a couple of reboots before the targeted apps start showing the modifications.
Disable Flag Secure: com.varuns2002 is working, sort of. Please read the module's page. Apps got wise to rooted devices ignoring FLAG_SECURE so now they use hardware DRM or detect screenshots and show you something else (Netflix). So it works only in older versions of apps, or apps that haven't bothered to detect screenshots.
GravityBox [R]: Everything I tried works perfectly.
Physical Button Master Control: The module works as intended, the companion config app has some issues, hopefully they'll be solved soon.
XPrivacyLua: Works perfectly. No issues with SafetyNet.
Not working:
...
Other tested and working Root Apps:
AdAway
Fox's Magisk Module Manager
Franco Kernel Manager
Termux
Not testet yet:
Call Recorder
FolderSync
Total Commander
Vanced Manager
WireGuard
Other tested and working Magisk modules:
1Controller - 1 Module to support all Controllers
Call Recorder - SKVALEX
F-Droid Privileged Extension
Move Certificates (version by Androidacy)
Other tested and working LSPosed modules:
BubbleUPnP AudioCast
Moved to Magisk section
Magisk v25.2 hide app/package
As title, I am running Magisk App v25.2, and trying to get undetected on RootBeer I have enabled Zygisk Installed Shamiko, SafetyNet fix and Magisk BuildProps, and 'hidden' RootBeer in the deny list The device now passes every check except...
forum.xda-developers.com