Related
After updating to 43 OTA 004, Faceunlock is no longer instant. now you see first the lockscreen flash and then UI slide in. I went back to 43 OTA 003, but same situation.
before it was just press powerbutton/doubletap screen and the screen turned on showing instantly UI whereever you left off. just like all the reviewers showed it. I dont have file to go back to inital firmware 001 .... :/
VERY DISAPPOINTING, it really breaks the "instant" feeling. hope they fix it soon.
meanwhile, no speed increase in fingerprint reader. still slightly slower than OP3.
UPDATE: solved - it is Nova Launcher with a custom wallpaper that caused this -> back to Oneplus launcher, set new wallpaper = FaceUnlock instant again!
Not a terrible trade-off for more security.
FP sensor still fast af.
t2jbird said:
Not a terrible trade-off for more security.
Click to expand...
Click to collapse
what makes you think they inceased security?
t2jbird said:
FP sensor still fast af.
Click to expand...
Click to collapse
coming from OP3, that s not true... at least not for me YMMV
i can upload side-by-side vid tonight.
Hope everyone is reporting these "bugs" to OnePlus instead of just reporting them here.
Baldilocks said:
Hope everyone is reporting these "bugs" to OnePlus instead of just reporting them here.
Click to expand...
Click to collapse
reason for posting it here is to find out if anyone else experiencing this
ewww i hope not, then there is no difference than what was on the OP3/T smart lock, i liked the option that u didn't have to swipe up, i will prob return mine if this is the case.
phynesse said:
what makes you think they inceased security?
coming from OP3, that s not true... at least not for me YMMV
i can upload side-by-side vid tonight.
Click to expand...
Click to collapse
https://www.xda-developers.com/oneplus-face-unlock-oneplus-5t/
Works great for me!
I dont even see the lockscreen!
t2jbird said:
https://www.xda-developers.com/oneplus-face-unlock-oneplus-5t/
Click to expand...
Click to collapse
sooo, not security focused then. also doesnt explain why it now shows the lockscreen, instead of unlocking straight to UI... like with fingerprint
Nick502 said:
Works great for me!
I dont even see the lockscreen!
Click to expand...
Click to collapse
thanks for reply. and you are on which Oxygen version? 4.7.1 or higher?
phynesse said:
thanks for reply. and you are on which Oxygen version? 4.7.1 or higher?
Click to expand...
Click to collapse
Im on 4.7.2
Nick502 said:
Works great for me!
I dont even see the lockscreen!
Click to expand...
Click to collapse
+1 same here it unlocks instantly. I have added a FP too.
gianton said:
+1 same here it unlocks instantly. I have added a FP too.
Click to expand...
Click to collapse
thanks, ok then i did something to cause it... hm too bad
Here on 4.7.2 its also slow.
I had the same problem and factory reset: face unlock is back to being instant, and the finger print reader is noticeably faster. It is troublesome, however, that an OTA forced me to factory reset a 3 day old phone...
I have also reset after update but not solved.
I updated homescreen and lockscreen wallpaper with a custom one and experienced a slight drop on face unlock speed. Meaning that I was able to see the lockscreen for 1/10 of a second before the homescreen was there. I reverted the wallpaper choosing one of oneplus 's and face unlock speed was back to instant. Just a tip.
Works fine for me. I'm on FreedomOS based on Oxygen 4.7.2.
xByt3z said:
Works fine for me. I'm on FreedomOS based on Oxygen 4.7.2.
Click to expand...
Click to collapse
This is the 5t thread and not 5, thanks.
Schrotty35 said:
This is the 5t thread and not 5, thanks.
Click to expand...
Click to collapse
I'm aware. I built FreedomOS myself for the 5T.
@AnjoVingador sir can u please maintain are pixel experience rom because this rom is quite stable but some of the bugs are there to be solved please sir
+1
+1
I would really appreciate, if it conitnues.
+1
Yes, it will. New build soon
AnjoVingador said:
Yes, it will. New build soon
Click to expand...
Click to collapse
Thank you so much sir...one more request can you please bring always on and ambient display if possible...thanks in advance
AnjoVingador said:
Yes, it will. New build soon
Click to expand...
Click to collapse
Also some gesture and if OTA update could be possible
sonarkrishna said:
Also some gesture and if OTA update could be possible
Click to expand...
Click to collapse
Adding Always on display is ridiculous on our phone as the display is not done for it. Ambiant display is already there if you means the screen showing notifications while on black when receiving. For gestures, what do you mean? It has dt2w and that is the only gesture we do have on this device. For ota I already talked about it with him and he don't know if it will come. It is not up to him but it is the rom creator that must do it
benplay64 said:
Adding Always on display is ridiculous on our phone as the display is not done for it. Ambiant display is already there if you means the screen showing notifications while on black when receiving. For gestures, what do you mean? It has dt2w and that is the only gesture we do have on this device. For ota I already talked about it with him and he don't know if it will come. It is not up to him but it is the rom creator that must do it
Click to expand...
Click to collapse
Okay... Are you using pixel experience rom if yes will you post to arnova8g2 for portrait mode to work because it has a full hardware support to work. And post him with logcat
sonarkrishna said:
Okay... Are you using pixel experience rom if yes will you post to arnova8g2 for portrait mode to work because it has a full hardware support to work. And post him with logcat
Click to expand...
Click to collapse
Yes I'm on PE since its release. But no need to post anything about portrait mod, Mrhacker seems to have resolved it. So it a question of time for us and hard work for him before we do have it on all the other roms. Wait patiently... Also I don't which bugs you're mentioning. I don't have any. Not apparent at least
benplay64 said:
Yes I'm on PE since its release. But no need to post anything about portrait mod, Mrhacker seems to have resolved it. So it a question of time for us and hard work for him before we do have it on all the other roms. Wait patiently... Also I don't which bugs you're mentioning. I don't have any. Not apparent at least
Click to expand...
Click to collapse
More stable I want
sonarkrishna said:
Okay... Are you using pixel experience rom if yes will you post to arnova8g2 for portrait mode to work because it has a full hardware support to work. And post him with logcat
Click to expand...
Click to collapse
Finally finally portrait mode is succeeded to work on lovely Lenovo z2 plus special thanks to @mr.hacker
Now eagerly waiting for portrait mode on pixel experience rom
Pixel Experience is Surely the Best Rom for our device , maybe it's just me who finds it but still I would request the devs to pls maintain it further. BTW by what time should we expect a new build?
You can enable fast charging 3.0 in this pixel experience rom?
Manthanmk1 said:
You can enable fast charging 3.0 in this room?
Click to expand...
Click to collapse
How is it so..?
Finally portrait mode is on its way to Lenovo z2 plus
well hello to everyone
i hope you all loving camera and having good time with it do post your best settings and help guys who having issues with camera settings.
so i have investigated camera hal sources and now it looks like all is okay for releasing and open source for community
so here is the link to camera hal sources https://github.com/omni-zuk/device_z...oid-8.1/camera
all commits are open here and ready for cherry-pick https://github.com/omni-zuk/device_z...0a9787bab45b33 well developers needs to revert this commit because this commit only for omnirom which don;t need project pathmap so reverting it will work for other roms and make hal compatible for other roms without issues.
thanks to everyone i got very positive response from the users on xda and telegram so big thanks to all of you. @AnjoVingador
Okay I'm confused. Who is the new maintainer of PE?
Want development of this rom to continue so bad...
Beepboop_blues said:
Okay I'm confused. Who is the new maintainer of PE?
Want development of this rom to continue so bad...
Click to expand...
Click to collapse
Keep your opinion towards you if u don't want to use it then just stay away
If no one can, I can build?
sonarkrishna said:
Keep your opinion towards you if u don't want to use it then just stay away
Click to expand...
Click to collapse
Hostile
Hi,
For some reason, got an update from samsung this morning, latest One UI 2.5.
After updating my Gcam stopped working, tried several different apps but
still stops and closes when opened. Any ideas???
Ken
That's a little concerning. Can you download Camera2 API Probe from the Play store and see if the camera still supports RAW capture?
Also try this specific gcam to see if it works for you https://f.celsoazevedo.com/file/cfiles/gcm1/NGCam_7.4.104-v1.4_snapcam.apk
hi
Hi,
Thanks, I'll try it.
beserker15 said:
That's a little concerning. Can you download Camera2 API Probe from the Play store and see if the camera still supports RAW capture?
Also try this specific gcam to see if it works for you https://f.celsoazevedo.com/file/cfiles/gcm1/NGCam_7.4.104-v1.4_snapcam.apk
Click to expand...
Click to collapse
Ok,
Tried your Gcam, same not working, closes when opened. I was using the latest UltraGcam for quite a while now.
Ken
Please download the Camera API2 Probe app and take a screenshot of what it says. I've attached what mine says and I'm still on the July release before OneUI 2.5.
https://play.google.com/store/apps/details?id=com.airbeat.device.inspector
View attachment 5084463
View attachment 5084465
View attachment 5084467
beserker15 said:
please download the camera api2 probe app and take a screenshot of what it says. I've attached what mine says and i'm still on the july release before oneui 2.5.
https://play.google.com/store/apps/details?id=com.airbeat.device.inspector
Click to expand...
Click to collapse
kenfb1 said:
View attachment 5084463
View attachment 5084465
View attachment 5084467
Click to expand...
Click to collapse
Strange, your screenshot looks like mine so camera api2 hasn't changed? Hmm, how about trying a gcam version that doesn't work for me on the old update.
https://f.celsoazevedo.com/file/cfiles/gcm1/MGC_7.4_v1.0f_TlnNeun.apk
Ok,
Thanks, I'll try it tomorrow. I've been trying different developers versions to see if I get lucky.
Samsung must have done something in the 2.5 update to OneUi that caused it for me.
Read This
kenfb1 said:
Ok,
Thanks, I'll try it tomorrow. I've been trying different developers versions to see if I get lucky.
Samsung must have done something in the 2.5 update to OneUi that caused it for me.
Click to expand...
Click to collapse
https://www.reddit.com/r/Galaxy_S20...working_gcam_ports_for_the_s20_ultra_running/
Haha yeah I've been trying to get people on that reddit thread to try things as well. It seems a person in the Note 20 Ultra thread confirmed this version works. Can you try? https://f.celsoazevedo.com/file/cfiles/gcm1/HyperCam-RaizenA-10.apk
Ok,
I'll try
Ok,
Tried HyperCam, it actually opened for a while, I went into setting to
change a few things and bam, closed and never opened after that!!!
kenfb1 said:
Ok,
Tried HyperCam, it actually opened for a while, I went into setting to
change a few things and bam, closed and never opened after that!!!
Click to expand...
Click to collapse
Lol clearing data for the app should get it working again. Bigger question though is do you remember which options you changed that broke it?
Hi,
Nope, maybe reinstall later and try again,
Ken
beserker15 said:
Lol clearing data for the app should get it working again. Bigger question though is do you remember which options you changed that broke it?
Click to expand...
Click to collapse
So I tried Hypercam. When I switched to the telephoto it completed crashed. Wipe data and got everything back. Front-facing camera just hangs.
I spent a good amount of time yesterday trying different GCam versions. Some partially worked, namely some HyperCam versions and TrCamera versions. Couldn't seem to get the front camera working on any versions, however. No matter what RAW and Viewfinder format I chose, the front camera would either hang, or cause the app to crash. I rooted through as many settings as I could think to change around to get the front camera working, but nothing was working for me. So I would imagine that the versions that are closing immediately may have some sort of front camera configuration that is now not playing nice after the 2.5 update.
Definitely very strange, hoping a dev can nail this down, because I have been trying to use Samsung's camera app and, boy it's just not comparable to GCam, especially the front camera.
mstras said:
So I tried Hypercam. When I switched to the telephoto it completed crashed. Wipe data and got everything back. Front-facing camera just hangs.
Click to expand...
Click to collapse
xDMONEYx said:
I spent a good amount of time yesterday trying different GCam versions. Some partially worked, namely some HyperCam versions and TrCamera versions. Couldn't seem to get the front camera working on any versions, however. No matter what RAW and Viewfinder typing I chose, the front camera would either hang, or cause the app to crash. I rooted through as many settings as I could think to change around to get the front camera working, but nothing was working for me. So I would imagine that the versions that are closing immediately may have some sort of front camera configuration that is now not playing nice after the 2.5 update.
Definitely very strange, hoping a dev can nail this down, because I have been trying to use Samsung's camera app and, boy it's just not comparable to GCam, especially the front camera.
Click to expand...
Click to collapse
That's actually very helpful. Can you guys download the Camera API2 Probe app and post screenshots of what it says for Camera ID 1 and ID 3? This is mine for my Camera ID 1 on the older build.
beserker15 said:
That's actually very helpful. Can you guys download the Camera API2 Probe app and post screenshots of what it says for Camera ID 1 and ID 3? This is mine for my Camera ID 1 on the older build.
Click to expand...
Click to collapse
I have attached the camera info.
It looks like the front facing camera is not giving RAW.
Also since I didn't mention it previously I am using a Snapdragon USA unlocked S20
beserker15 said:
That's actually very helpful. Can you guys download the Camera API2 Probe app and post screenshots of what it says for Camera ID 1 and ID 3? This is mine for my Camera ID 1 on the older build.
Click to expand...
Click to collapse
Looks like both those IDs on the update don't allow RAW capture. That must be part of the problem. Do you know if it is fixable?
mstras said:
I have attached the camera info.
It looks like the front facing camera is not giving RAW.
Also since I didn't mention it previously I am using a Snapdragon USA unlocked S20
Click to expand...
Click to collapse
xDMONEYx said:
Looks like both those IDs on the update don't allow RAW capture. That must be part of the problem. Do you know if it is fixable?
Click to expand...
Click to collapse
Thanks guys. Super useful info. I don't know if it's fixable but I'm passing the info to the gcam testing group that I'm in so hopefully one of the devs will see and know what to do about it.
Just downloaded OneUI 2.5 through ota update on my s10 lite in the Netherlands.
To bad we miss out on the pro camera options.
For now the update feels good and snapppy.
Is the update you downloaded G770FXXU3CTH4?
I heard that S10 Lite users in Spain have gained Pro functions for photos. Including shutter speeds of up to 10s and ISO of up to 1600. Can you please confirm for me? I don't know who to believe.
Yes i have the same build. It looks like i got oxm_phe (spanish) Phone.
I also have the iso 1600 and other option in your screenshot. Is That the way to check if pro modus is availible?
Qball_NL said:
Yes i have the same build. It looks like i got oxm_phe (spanish) Phone.
I also have the iso 1600 and other option in your screenshot. Is That the way to check if pro modus is availible?
Click to expand...
Click to collapse
Yes. This is the pro mode that has been in demand for a long time by S10 Lite users.
Unfortunately, it is much more limited than the pro mode of the rest of the S10 family.
Qball_NL said:
Just downloaded OneUI 2.5 through ota update on my s10 lite in the Netherlands.
To bad we miss out on the pro camera options.
For now the update feels good and snapppy.
Click to expand...
Click to collapse
do you know if the green tint issue was fixed in this update?
Dont know...
Qball_NL said:
Dont know...
Click to expand...
Click to collapse
do u have this issue there on your device or not?
Gilfreitas said:
do u have this issue there on your device or not?
Click to expand...
Click to collapse
No i dont have this issue
Qball_NL said:
No i dont have this issue
Click to expand...
Click to collapse
when did u buy your device?
Gilfreitas said:
when did u buy your device?
Click to expand...
Click to collapse
I bought it in the netherlands. But it is a spanish device from origin.
I have it now for about three weeks.
my device model is for Ukraine Russia Armenia Georgia blearus and Moldova
when i should get the update
MORADESSA said:
my device model is for Ukraine Russia Armenia Georgia blearus and Moldova
when i should get the update
Click to expand...
Click to collapse
Mine wasn't getting any update. So i installed the last with odin. Worked fine. I just had to download 5.2gb rom..
ok i got the ota update
wifi calling issues fixed now
amoled panel still have some bugs
i dont know if it software related
the black color is creating shadow when moving
Hello guys, Has anyone faced network icon issue ? It shows full network signal despite emergency calls only is displayed on the lock screen.
ok let me start custom roms blow stock out of the water but the only thing that made me go back to stock was the camera app , in my opinion gcam struggles to focus I do consider myself a a photography pro , that being said , i love the performance of the customs roms overstock , hands down, but the default camera is the deal breaker in my opinion, g-cam struggles to focus , especially in macro mode , I do hope some one port the ANX camera to a custom rom ... just my 2 cents and I tried them all Gcam / configs so save your breath...
I agree, the stock cam is just better, more convenient and faster imo. Luckily for me I dont care much about photos.
Sorry I got that wrong.
jefffrom said:
ok let me start custom roms blow stock out of the water but the only thing that made me go back to stock was the camera app , in my opinion gcam struggles to focus I do consider myself a a photography pro , that being said , i love the performance of the customs roms overstock , hands down, but the default camera is the deal breaker in my opinion, g-cam struggles to focus , especially in macro mode , I do hope some one port the ANX camera to a custom rom ... just my 2 cents and I tried them all Gcam / configs so save your breath...
Click to expand...
Click to collapse
It's true, thanks to a user of this forum that I don't remember the name I was able to use the Gcam for normal and night photos but the macros are still a problem.
Another thing that is making me think about going back to Stock ROM is that there is no support and continuity of updates.
I really love the stock camera too. But for Macros or really close photos it can't focus could you give me a tip, to improve it.
Does any custom rom support the stock camera app?
ANX camera version 202 support our phone with Android 11
AndroZeek said:
ANX camera version 202 support our phone with Android 11
Click to expand...
Click to collapse
Link please
jefffrom said:
Link please
Click to expand...
Click to collapse
204 version is working ok.
ANXCamera - pling.com
MOD EDIT: Link Removed
ptr21 said:
204 version is working ok.
ANXCamera - pling.com
MOD EDIT: Link Removed
Click to expand...
Click to collapse
Even the macro?
I looked at the link but don't understand how to install.
pegasoc said:
Even the macro?
I looked at the link but don't understand how to install.
Click to expand...
Click to collapse
Yes
pegasoc said:
Even the macro?
I looked at the link but don't understand how to install.
Click to expand...
Click to collapse
Find files sections "Files(32)"
Download the last, 204 version
Install with magisk
First couple of times opening camera gives error, but not to worry, try again.
ptr21 said:
204 version is working ok.
ANXCamera - pling.com
MOD EDIT: Link Removed
Click to expand...
Click to collapse
Does taking videos work for you? I can only take pics.
ptr21 said:
Find files sections "Files(32)"
Download the last, 204 version
Install with magisk
First couple of times opening camera gives error, but not to worry, try again.
Click to expand...
Click to collapse
Hi,
right after taking the picture the app closes, the picture is saved but every time I have to reopen the app. If I take a photo in night mode the app closes and the photo is not saved.
I also have Gcam installed can there be a conflict?
sn00x said:
Does taking videos work for you? I can only take pics.
Click to expand...
Click to collapse
Apparently it looks like the video is being made but I don't understand where it is being saved.
sn00x said:
Does taking videos work for you? I can only take pics.
Click to expand...
Click to collapse
Video is working only in 1080p 60fps mode.
pegasoc said:
Hi,
right after taking the picture the app closes, the picture is saved but every time I have to reopen the app. If I take a photo in night mode the app closes and the photo is not saved.
I also have Gcam installed can there be a conflict?
Click to expand...
Click to collapse
Can't tell.
Maybe it depends also on custom rom, what is installed.
I'm on Syberia OS. Night mode is working ok.
ptr21 said:
Can't tell.
Maybe it depends also on custom rom, what is installed.
I'm on Syberia OS. Night mode is working ok.
Click to expand...
Click to collapse
I too use Syberia v. 4.8 September 22, 2021
ptr21 said:
Video is working only in 1080p 60fps mode.
Click to expand...
Click to collapse
Thank you. After switching from 30fps to 60fps the video was indeed stored correctly!