So I decided to release a kernel I did for the Telegram group. It's based on Nougat latest CAF May Updated, and is Oreo ready.
It will auto install magisk so you are rooted.
Jason_Miui_Nougat_Kernel: https://www.androidfilehost.com/?fid=818222786056029778
Jason_Nougat_Anykernell: https://www.androidfilehost.com/?fid=962339331458992566 (Use Anykernel for AOSP or MIUI Install)
Kernel Sources
https://github.com/travismills82/android_kernel_xiaomi_sdm660/commits/miui-oreo
Bugs:
You tell me
Features:
Enable CIFS/SMB support
Enable F2FS support
Enable NTFS support
Added fsync on/off support.
+ many more changes check commits on github
Your kernel is for:
Miui?
Custom Rom?
Has it
KCal support?
ExFat/NTFS support? @travis82
telegram group link please?
What additional features do you provide? Apart from May security patches, of course. I don't see many commits from the base, but still I'm currently too lazy to browse and understand the diff
dissidius said:
telegram group link please?
Click to expand...
Click to collapse
there you go
https://t.me/joinchat/GJTWU0faKQew7fwn37Y1fw
It does not work for miui8.4.26 dev，device always boots into twrp。
Flashed at Mi-Globe 8.4.26 without problems.
No kcal support.:crying::crying::crying: @travis82
dzidexx said:
Flashed at Mi-Globe 8.4.26 without problems.
No kcal support.:crying::crying::crying: @travis82
Click to expand...
Click to collapse
Why do you need KCAL so bad why is this life or death for you? Doesn't your display show colors correctly?
I love Vomer DeepReach.
https://forum.xda-developers.com/oneplus-2/general/kernel-adiutor-kcal-color-profiles-t3382086
But I can live without it.
:laugh:
device always boots into twrp
please add kcal profiles. It is making screen a lot better, also rom is not booting, bootlop into twrp - lastest miglobe
Whats the tested MIUI version?
it works with Xiaomi.Eu 9.5 stable?
Can't boot after flashing kernel#2, booting only to twrp.
(all methods tried, reboot system in twrp, power off & on).
Kernel#1 didn't try today.
Miui.eu stable 9.5.8.0 NCHCNFA. @travis82
Added anykernel install so you MIUI and AOSP users can use the same kernel.
Installed the anykernel version, but I can't get that high mem score (roughly the same as stock). This is on MIUI EU dev 8.4.26. And oh, at the end of installation I get "unable to unmount" error but I think that's fine.
leledumbo said:
Installed the anykernel version, but I can't get that high mem score (roughly the same as stock). This is on MIUI EU dev 8.4.26. And oh, at the end of installation I get "unable to unmount" error but I think that's fine.
View attachment 4502767
Click to expand...
Click to collapse
Did you stick at this kernel? How is the battery and daily usage?
Dan_Jacques said:
Did you stick at this kernel? How is the battery and daily usage?
Click to expand...
Click to collapse
No, I'm back to stock with MIUI EU 8.10.11.
Related
Hi OnePlus 5 peeps!
Today (June 27th), I graduated from high school!
In more important news, I finished upstreaming the OnePlus 5 kernel to the latest stable kernel version...
Whoa, what is this?
This is my personal kernel that I run as the OnePlus 5 is my daily driver.
I will not claim my work as the best at anything, but just know that I would not do anything to this kernel that could potentially ruin my own device.
Additionally, this is the kernel that comes built into CarbonROM.
There are three versions of this kernel:
AOSP aka AOSP/LOS build - Flash this on any source built custom ROM except for CarbonROM
CR-5.1 aka CarbonROM build - Flash this on CarbonROM
OOS aka OxygenOS build - Flash this version on OxygenOS
Main features:
Upstreamed Linux kernel version, went from v4.4.21 -> v4.4.79
Backported random driver from Linux v4.12 (latest and greatest)
Backported scheduler from Linux v4.9 (latest android kernel branch)
Upstreamed F2FS driver from f2fs-stable/linux-4.4.y
KGSL driver improvements
MDSS driver improvements
SOC driver improvements
Built using Optimization Level 2
Added maple io scheduler (default) by frap129
Added adreno idler by arter97 with tweaks from frap129
Vibrator motor control by flar2
Kcal control driver from EX kernel
Many wakelocks disabled
Switched to power efficient workqueues across the kernel
Built with Google's latest stable gcc-4.9
Anykernel 2.0 by osm0sis! Compatible with all OxygenOS based roms
Download:
Latest builds
OxygenOS boot.img
How to install:
1. Reboot into the latest stable TWRP build
2. Download kernel zip and make sure it is in your internal storage (/sdcard)
3. Reboot into TWRP
4. Double check here to see if you require any additional instructions
5a. Install -> Install image -> select oxygen-4.x.x-boot.img -> swipe to install
5b. Install -> select CarboniteKERNEL-XXX-Rx-OP5-N.zip -> swipe to install
6. Reboot
DISCLAIMER!
If you don't understand my instructions, that's too bad >
If you are unsure about what this thing is, I highly advise you do some research before going through with installing...
Updates will come as regular as I want them to, don't ask me when I'll release cause you'll know when it comes out >:'D
XDA:DevDB Information
CarboniteKERNEL for the OnePlus 5, Kernel for the OnePlus 5
Contributors
adinkwok, nathanchance, flar2, Lord Boeffla, osm0sis, etc
Source Code: https://github.com/adinkwok/oneplus5-kernel
Kernel Special Features: One of Taylor Swift's exes should write a song called "Maybe You're the Problem"
Version Information
Status: Testing
Created 2017-06-28
Last Updated 2017-08-02
While this reserved post is not being used, enjoy this video! (Find me at 0:50s and twice at 2:54 :silly
For OxygenOS users:
Code:
[B]If you are on OxygenOS and are coming from another custom kernel:[/B]
Download the latest stock.4.X.X-boot.img
You [B]must[/B] flash the boot.img before flashing the kernel!
[B]If you are on OxygenOS are switching to a different custom kernel:[/B]
Download the latest stock.4.X.X-boot.img
You [B]must[/B] flash the boot.img before switching kernels!
For AOSP/LOS/RR/etc users:
Code:
[B]If you are coming from another custom kernel:[/B]
You [B]must[/B] reflash your ROM build before flashing this kernel!
[B]If you are on AOSP/LOS/RR/etc and are switching to another custom kernel:[/B]
You [B]must[/B] reflash your ROM build before flashing another kernel!
Why is it like this?
I have included some ramdisk modifications that set the default settings for this kernel. When you come from a different custom kernel, the ramdisk changes from that kernel may conflict with the changes I intend to have. Likewise when you switch to a different kernel; my ramdisk changes may conflict with the changes they intend to have. When you flash the stock boot.img, it replaces the modified ramdisk with a clean one, removing these conflicts.
And it's here, get it while it's hot folks! First upstreamed kernel for the OP5
Thanks for joining the party :highfive:
Sent from my OnePlus5 using XDA Labs
gz on graduating! and thx for the kernel :=
Congratulations on the graduation buddy,
Just flashed and I had charging cycling on and off (using dash charger in car on freedom v1.1). Flashed EX and charging is fine. Need charge ATM but maybe a little later I can help you get a log.
Sent from my OnePlus5 using XDA Labs
congratulations! awesome... so smart!!!!!!!
rav101 said:
Congratulations on the graduation buddy,
Just flashed and I had charging cycling on and off (using dash charger in car on freedom v1.1). Flashed EX and charging is fine. Need charge ATM but maybe a little later I can help you get a log.
Sent from my OnePlus5 using XDA Labs
Click to expand...
Click to collapse
Hmmm never noticed this... I guess the graduation drinks are getting to me. I'll re-upload a stable build without upstreaming as that's definitely the culprit.
What an amazing day for you (Congratulations!) and the OP5 community!
I was really loving and enyoing all your efforts you did for the OPO (Pure Nexus port) and the amazing Carbon ROM.
adinkwok said:
Hmmm never noticed this... I guess the graduation drinks are getting to me. I'll re-upload a stable build without upstreaming as that's definitely the culprit.
Click to expand...
Click to collapse
I'm the first to report so let's see if anyone else has the same issue. I will also try for logs later on though I do have a lot on today (so might be this evening).
I didn't actually reboot or get to try a different charger to help diagnose so don't want you doing more work that you need to for what could me my issue
Sent from my OnePlus5 using XDA Labs
rav101 said:
I'm the first to report so let's see if anyone else has the same issue. I will also try for logs later on though I do have a lot on today (so might be this evening).
I didn't actually reboot or get to try a different charger to help diagnose so don't want you doing more work that you need to for what could me my issue
Click to expand...
Click to collapse
I can confirm the issue because while I was bringing up the upstream branch I ran into this issue with dash charging and I thought I solved it. Time to debug!
Edit: link updated without the upstreaming, everything else still stands though
adinkwok said:
I can confirm the issue because while I was bringing up the upstream branch I ran into this issue with dash charging and I thought I solved it. Time to debug!
Edit: link updated without the upstreaming, everything else still stands though
Click to expand...
Click to collapse
No problem buddy,
Be good once it's all resolved and we have the benefits of upstream kernel code as well!! Your time and effort is appreciated!
Sent from my OnePlus5 using XDA Labs
@rav101 happy to see u around buddy
dukat0s said:
@rav101 happy to see u around buddy
Click to expand...
Click to collapse
For sure my friend.
How you finding the OP5?
Sent from my OnePlus5 using XDA Labs
rav101 said:
For sure my friend.
How you finding the OP5?
Click to expand...
Click to collapse
Cool my friend !like it.just got rid of my s8+. Was bored
Is DT2W working for you guys?
bartelamo said:
Is DT2W working for you guys?
Click to expand...
Click to collapse
Seems to be a problem among a few custom built kernels, we're looking into it.
bartelamo said:
Is DT2W working for you guys?
Click to expand...
Click to collapse
adinkwok said:
Seems to be a problem among a few custom built kernels, we're looking into it.
Click to expand...
Click to collapse
It's because OOS has a hal that already uses a switch for dt2w.
New update, still looking into the gestures issue.
However, Dash Charging is fixed on the upstream kernel so here it finally is! I also added a bunch of sched patches, a thermal patch, and some other misc stuff from the latest CAF branch.
Adin-Kernel-R2-OP5-OOS-N.zip
Hi all.
Compatibility:
Builds from r1 up to r12 are for Android 7.1.1 Nougat OxygenOS based roms only.
Builds from r13 are for Android 8.0.0 Oreo OxygenOS based roms only.
Builds starting with r18 work with Android 8.1.0 Custom roms.
Builds starting with r28 up to r32 work with OxygenOS 5.1.0 Android 8.1.0
Builds starting with r33 work with OxygenOS 5.1.5 Android 8.1.0
Builds starting with r40 are for OxygenOS 9.0 Android Pie.
Builds starting with r44 are also available for custom roms such as LineageOS.
Download:
https://francokernel.app
Installation:
Flash the zip in your recovery
or
Auto-flash from FK Kernel Manager app, it's magical
Changelog:
https://francokernel.app
Scroll down, choose your device & select the latest release to see the changelog.
Source:
https://github.com/franciscofranco/OP5-5T-unified
Follow me on socials for updates and interesting tidbits
Twitter[/URL
FK Kernel Manager video
[url]https://www.youtube.com/watch?v=ARdNqh71D0E
Disclaimer to moderators:
Slight OT is fine, but when users decide to act stupid they should be dealt with with the appropriate means - its really annoying for me when OT turns crazy. Please put the warning/ban hammer anytime any of you think there's lack of respect and/or too much unwanted OT crap - but if it doesn't meet this criteria let the OT posts alone. Thank you.
Cheers!
Wow nice! For OOS?
As usual there's a large focus on battery life. F2FS is upstreamed to the latest version and I spent a couple days single picking useful commits from Qualcomm's repository with fixes and power consumption improvements.
You should see an improvement in battery life.
Beukhof1 said:
Wow nice! For OOS?
Click to expand...
Click to collapse
Yes.
wowww Franco is here!
25% off sale on FK Manager & Updater for the next 48 hours to celebrate adding One Plus 5 support
https://play.google.com/store/apps/details?id=com.franco.kernel
I'm wait this moment. Thanks FF!
@franciscofranco The king is here!!!!Tnx buddy!!
can it be flash over another custom kernel?
Thank you for supporting Oneplus 5! Using now and it's very smooth.
Just want to report also that the stock screen gestures (double tap to wake, draw O for camera etc) are not working yet
lohaanaa said:
can it be flash over another custom kernel?
Click to expand...
Click to collapse
Nope....first stock kernel...after custom one....
Great work Franco!
After a reboot, the phone boots to default color calibration and it takes like 10-20 seconds to switch to DCI-P3 or SRGB.
PS:Gestures are broken too.
The kernel is systemless?
Sent from ONEPLUS A5000 by Tapatalk
v7 said:
After a reboot, the phone boots to default color calibration and it takes like 10-20 seconds to switch to DCI-P3 or SRGB.
PS:Gestures are broken too.
Click to expand...
Click to collapse
Color calibration did not reset for me. Working fine. But Gestures don't work when screen is off.
I don't see the discount price for the Manager & Updater in the PlayStore.
Edit: price already updated in the store
@franciscofranco
fsync seems to be causing issues for me. With fsync disabled some apps fc after being cleared and some other work fine. After reenableing fsync everything returns to normal.
I´am running the latest stock rom with the only modificatiion being your kernel and magisk.
here is a short vid. of it in action: https://gfycat.com/MemorableMemorableCaecilian
logcat (sorry its quite huge ) https://www.dropbox.com/s/w2rbudldqw3ofvr/log.txt?dl=0
AlfalfaX said:
fsync seems to be causing issues for me. With fsync disabled some apps fc after being cleared and some other work fine. After reenableing fsync everything returns to normal.
I´am running the latest stock rom with the only modificatiion being your kernel and magisk.
here is a short vid. of it in action: https://gfycat.com/MemorableMemorableCaecilian
Click to expand...
Click to collapse
Grab a logcat.
Nice, I missed you (used Franco on my 3T). Already have the app, but nice for new users with discount :highfive:
Nice thanks
lohaanaa said:
can it be flash over another custom kernel?
Click to expand...
Click to collapse
Flash full zip. Let it boot. Boot back too twrp then flash kernel
Introduction
NOTE:
Hello everyone, this is my first kernel for the Moto G4 Plus. I will try to maintain a stable kernel however bugs might arise since I'm not a super star kernel developer. I hope you enjoy the releases.
Important information
I will not reply to complains that do not include clear steps to reproduce the bug, a logcat, and a console ramoops (if random rebooting) or a dmesg (any other issues). Follow this guide to do this.
Features
Here are the major features of the kernel (feel free to explore Github)
Update to date with the latest Linux upstream version (3.10.108-EOL)
Westwood as the default congestion algorithm with many more to choose from
Several subsystems converted to use power efficient workqueues
Compiled with Google's arm-eabi 4.9 toolchain
Audio control from flar2
Downloads
Oreo 8.0 : https://sourceforge.net/projects/babyfish-kernel/files/athene/oreo_caf/
Nougat 7.1 : https://sourceforge.net/projects/babyfish-kernel/files/athene/nougat_caf/
Nougat 7.0 Stock :https://sourceforge.net/projects/babyfish-kernel/files/athene/stock_nougat/
Installation:
NOTE: Please make sure that you return to the stock kernel of the ROM before flashing this kernel. The kernel is unified for Moto G4 and the Plus variant so everything should be working fine.
Install the latest adb and fastboot: https://developer.android.com/studio/releases/platform-tools.html#download
Grab the boot image from the download links above
Method 1:
Using adb and fastboot
Reboot into the bootloader using either restart and hold power button and volume down or adb:
Code:
adb reboot bootloader
Flash the boot image. Run the following command in the folder with the boot image and ensure fastboot is in your PATH:
Code:
fastboot flash boot <boot_image_name>.img
Reboot and profit!
Method 2: TWRP
Keep the bootimage on your phone's storage and boot to TWRP.
Install > Select Install Image > Choose the image > Boot partition > Reboot
Changelog
28 November 2017
Oreo-CAF:
Code:
Initial Release
Introduce Tossug Baby Fish kernel
Add Sound Control
Add TCP congestion algos
Disable crc check for 30% performance improvement in I/O
Linux 3.10.108
Nougat-CAF:
Code:
Initial Release
Introduce Tossug Baby Fish kernel
Add Sound Control
Add TCP congestion algos
Disable crc check for 30% performance improvement in I/O
Linux 3.10.108
Stock N:
Code:
FAQs
1.1 Q Can you help me I have this problem?
1.1 A I will surely try to help if proper bug reporting is done as per the fashion described above.
1.2 Q: Can you add xyz feature?
1.2 A: If you link me the commits or tell me what kernel you had the feature in, I can take a look at them. I will not add any useless governors or features that I don't find practical.
1.3 Q: How do I control the kernel?
1.3 A: I recommend using EX Kernel Manager or Kernel Auditor (Both need root)
1.4 Q: OMFG MY BATTERY SUXXXX PLS FIX!!!
1.4 A: The kernel doesn't drain any battery unless you have overclocked it, I have kept it at stock frequencies and voltages. Use an app like BetterBatteryStats to figure out what app is screwing with your phone.
Thanks to:
The various other developers for their patches (if you want a specific mention, please let me know)
All of you guys for viewing the thread
Thiago Neves @lcrd512 and Abhijeet Bohra.
Kernel source links.
8.0.0 CAF : https://github.com/tywinlannister7/android_kernel_motorola_msm8952/tree/oreo_caf
7.1 CAF : https://github.com/tywinlannister7/android_kernel_motorola_msm8952/tree/nougat_caf
7.0 Stock :
If you like my work, buy me an Appy Fizz or whatever you like
https://www.paypal.me/tywinlannister7 :good:
XDA:DevDB Information
Reviver Kernel, Kernel for the Moto G4 Plus
Contributors
tywinlannister7
Source Code: https://github.com/tywinlannister7/android_kernel_motorola_msm8952
Kernel Special Features:
Version Information
Status: Stable
Created 2017-11-28
Last Updated 2018-12-10
Screenshots
Some Screenshots
Will work on LOS, right? Sorry for asking this nooby question. I just want to be confirm before flashing. ?
tywinlannister7 said:
Some Screenshots
Click to expand...
Click to collapse
Which ROM is this?
Ayan Uchiha Choudhury said:
Which ROM is this?
Click to expand...
Click to collapse
DU 12 oreo
@tywinlannister7 Any plans on making some Device Specific ROM for Athene.? Since Invicta is out of scene now.
Thanks for the new addition in the family.
I hope this will be the favorite member of the family:laugh:
Where is the love for stock user?
thorin0815 said:
Where is the love for stock user?
Click to expand...
Click to collapse
There is a link for stock rom in the op though?
thorin0815 said:
Where is the love for stock user?
Click to expand...
Click to collapse
Stock version won't be released any sooner. I don't have the time for it right now and compilation process of stock kernel is a bit different than CAF kernels. Maybe before the second week of January.
briatide said:
There is a link for stock rom in the op though?
Click to expand...
Click to collapse
Empty as of now
ganeshkmr21 said:
@tywinlannister7 Any plans on making some Device Specific ROM for Athene.? Since Invicta is out of scene now.
Click to expand...
Click to collapse
IDK I don't have the time, we already have so many ROMs available. Creating a new ROM will be adding it to the huge list already available, from AOSP to LineageOS to Dirty Unicorns. I would rather work on optimizing what we have. Quality > Quantity.
jyoti.id said:
Will work on LOS, right? Sorry for asking this nooby question. I just want to be confirm before flashing.
Click to expand...
Click to collapse
Yes. 7.1 version for all N custom ROMs and 8.0 for all the O custom ROMs
DU 12 oreo
Blueman1990 said:
DU 12 oreo
Click to expand...
Click to collapse
about DU 12 oreo where can i get it ?
many thanks
i love new system
Does not boot on LOS15. Can anyone else confirm? Cant do logs cause my data port on my phone is broken. It sits on the boot screen like its loading but never fully boots.
Thank you bro!! finally an oreo kernel!
Where I can get DU 12?
Does this have color management?
And which kennel manager should i use with this?
Thanks
harshal2234 said:
Where I can get DU 12?
Click to expand...
Click to collapse
Its not out yet I guess
---------- Post added at 01:35 PM ---------- Previous post was at 01:33 PM ----------
Ashishliterally said:
Does this have color management?
And which kennel manager should i use with this?
Thanks
Click to expand...
Click to collapse
Bro its just a 2 page thread. At least read. That question has been answered, in the OP!
Can't I get the unofficial build?
Tried it but I got bootloop.
Using latest Resurrection Remix Rom With Stock kernel on XT-1643.
Missed the logcat.
Should I have to flash the magisk again after installing kernel?, may be this was the reaseon I got bootloop because boot.img was changed and again installing magisk could help with that.
Same for me. On LOS 14.1, XT1643
---------- Post added at 05:17 PM ---------- Previous post was at 05:16 PM ----------
ramansehra said:
Tried it but I got bootloop.
Using latest Resurrection Remix Rom With Stock kernel on XT-1643.
Missed the logcat.
Should I have to flash the magisk again after installing kernel?, may be this was the reaseon I got bootloop because boot.img was changed and again installing magisk could help with that.
Click to expand...
Click to collapse
I don't think so. If magisk is installed/flashed once, then no need of flashing ever again until you freshly install the rom. (AFAIK)
ramansehra said:
Tried it but I got bootloop.
Using latest Resurrection Remix Rom With Stock kernel on XT-1643.
Missed the logcat.
Should I have to flash the magisk again after installing kernel?, may be this was the reaseon I got bootloop because boot.img was changed and again installing magisk could help with that.
Click to expand...
Click to collapse
Same happened with me I was on Invicta os 8.0
Enchanted LineageOS 17.1 with 4.4 Infinity EAS Kernel
Gemini forever alive!
Download:
TWRP with 4.4 kernel
LineageOS 17.1
Installation:
If you are on stock TWRP you need to flash 4.4 to avoid any problems like /data corruption!
You need to perform a factory reset (format /data)!
Flash rom, gapps/microG and optionally magisk.
Known bugs:
Camera hang in Snap when switching to HDR (click back button and open camera again, boom, it's working)
Join Mi5 group on Telegram
Please consider donating to my hard work
https://paypal.me/xNombre
XDA:DevDB Information
Enchanted LineageOS 17.1 with 4.4 kernel, ROM for the Xiaomi Mi 5
Contributors
xNombre
Source Code: https://github.com/xNombre
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2020-01-06
Last Updated 2020-04-02
Reserved
Antutu Score
Reserved
¯\_(ツ)_/¯
Thanks for your hard work
hi
tanx 4 ur hard work
i want know about battery life plz..
install instruction?
and best frimware?
tanx
Can not change battery icon style it is stuck on Icon Portrait.
Hi @xNombre, just 2 quick questions regarding the the kernel used in your LOS release:
1- Does the kernel support HW Encryption? I remember on Havoc 2.9 (Android P) there was a port of 4.4 kernel with working HW crypto.
2- Will you release a standalone package of the infinity kernel in the future that can be used with other ROMs?
Thanks!
do we need jdc treble for this or what? since it "treble"
What about battery life?
can i flash other android 10 gsi based on this rom since it "treble"
immediately banned from telegram group right after joined. not even wrote a message or got a warning. interesting way to manage a community group.
i'll be around for feedbacks. thanks for your effort anyways.
nebik said:
Can not change battery icon style it is stuck on Icon Portrait.
Click to expand...
Click to collapse
It's LOS bug.
3V0LU710N said:
Hi @xNombre, just 2 quick questions regarding the the kernel used in your LOS release:
1- Does the kernel support HW Encryption? I remember on Havoc 2.9 (Android P) there was a port of 4.4 kernel with working HW crypto.
2- Will you release a standalone package of the infinity kernel in the future that can be used with other ROMs?
Thanks!
Click to expand...
Click to collapse
1. AFAIR not yet because it's not merged on LOS.
2. Probably no because there are too many custom changes made (dt & vendor) and I don't like listening to moaning that something is broken. I want to release more interesting ROMs some day (Syb... uhh ekh... eria).
shandianex1 said:
can i flash other android 10 gsi based on this rom since it "treble"
Click to expand...
Click to collapse
Hmmm, that's interesting question. I've only focused on making it fulfill all Android Q requirements concerning vendor separation (and such as APEX), not intended to make it GSI friendly. I guess there are still some incompabilities and you can't expect such and old device to be GSI friendly.
jackryder38 said:
What about battery life?
Click to expand...
Click to collapse
Test yourself, the biggest culprit about I can do nothing more is RIL. Maybe when Xiaomi releases Q for daisy, the blobs will make it better.
RmznDndr said:
immediately banned from telegram group right after joined. not even wrote a message or got a warning. interesting way to manage a community group.
i'll be around for feedbacks. thanks for your effort anyways.
Click to expand...
Click to collapse
The group is protected with antibot, I've checked your nickname and youre not banned for sure.
Enchanted LineageOS updated!
Changelog:
Merge latest kernel_common and CAF tag into kernel
Merge latest branch into qcacld driver
Use fq_codel queuing discipline, faster net
Update some blobs (those I have access to) from LA.UM.8.6.r1-02900-89xx.0
Remove unused move time data script
Add missing wifi mac generator
Fix USB tethering
Uprev Mapper to 2.1
Tweak Dalvik parameters accroding to new google configs
Go back to stock WiFi config and add some new Xiaomi edits - fixes connectivity problems
Rootdir updates
Minor cleanup
Fixup microG location
Massive overlay update from LA.UM.8.6.r1-02900-89xx.0
Selinux enforcing
Safetynet PASS!!!
Important LOS updates:
Fixed battery style
Updated to android 10.0 r23
Added survival script (magisk reflashes itself)
Repo sync all
Download via sf:
https://sourceforge.net/projects/xn...-17.1-20200119-UNOFFICIAL-gemini.zip/download
Please consider donating...
https://paypal.me/xNombre
xNombre said:
Enchanted LineageOS 17.1 with 4.4 Infinity EAS Kernel
Known bugs:
Speaker playing only left channel
5GHz hotspot
Camera hang in Snap when switching to HDR (click back button and open camera again, boom, it's working)
Click to expand...
Click to collapse
Fixed?
PavelPerm said:
Fixed?
Click to expand...
Click to collapse
Camera still hangs on HDR on/off. 5Ghz Hotspot works and about speaker i do not know.
nebik said:
Camera still hangs on HDR on/off. 5Ghz Hotspot works and about speaker i do not know.
Click to expand...
Click to collapse
Use this Gcam
https://easyupload.io/5ms9tu
It's version 7.2 - optimized and working 100% on gemini
PavelPerm said:
Fixed?
Click to expand...
Click to collapse
Not listed so not fixes, I thought it's clear.
New build could have some problems due to selinux change (dt2w or so) and I will push hotfix when I can.
xNombre said:
Not listed so not fixes, I thought it's clear.
New build could have some problems due to selinux change (dt2w or so) and I will push hotfix when I can.
Click to expand...
Click to collapse
I have problem with permission name (icon != Permission name)
Introduction
Dora kernel is a successor of popular nem0 kernel for A10/A11 ROMs.
Dora Kernel is CAF based kernel aiming to provide great stability and performance while maxing out battery life!
Code:
// Your warranty is now void.
//
// I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
// Please do some research if you have any concerns about features included in this Kernel before flashing it!
// YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Main Features:
- Unified for OOS 11 and Android 11 Custom ROMs (Check with your maintainer if they have R blobs merged in)
- Based and upstreamed to latest CAF tags for the SD855
- Upstreamed to latest Linux-Stable
- Upstreamed to latest F2FS stable
- Compiled with Clang 13 and -O3 speed optimizations flags
- Compiled with Clang Polyhedral Loop Optimizations (Polly)
- Simple LMK driver from kerneltoast
- BBR2 TCP congestion algorithm
- 675 MHz GPU step
- Custom energy-freq scheduling model for maximizing performance and battery life
- Custom frequencies setup (dropping to CAF default minimums during idle)
- S2idle suspend mechanism with patches from Google P4/P5 kernels
- PELT scheduling mechanism
- Many scheduler backports from mainline and/or 4.19 Google kernel
- Zip made using latest AnyKernel3 release, retains root on flash (Stable Magisk 21.4 or higher reccommended)
- Zip flashable through EXKM/FKM/Smartpack/TWRP
- Integrated OTA updates in Franco's Kernel Manager *(link for the json: JSON)
- Many more features I don't remember right now, check source if you're interested or contact me on Telegram!
Bug reports:
- If you want to report a bug, please provide some sort of logs (logcat, dmesg)
Flashing instructions:
- Just flash it through TWRP or EX or Franco's Kernel Manager apps
- No sorts of configs needed, flash and be happy out of the box
-There are 2 versions per release: one with SDCARD_FS disabled (default) and one with it enabled. Motivation behind this is recent updates to AOSP 11 ROMs (Yaap, Derp, etc.) that have disabled the support for it. And even though that builds with SDCARD_FS could still work, it's not recommended.
So, in layman terms, if you are running OOS or any custom ROM that still hasn't followed the path of those custom ROMs, please use the sdcard-fs zip or update through OTA.
Downloads
Stable and Test builds: Google Drive
Kernel being actively tested in this group: Telegram
Donations
If you would like to keep this project going with more improvements, feel free to support it: PayPal
Thank you to:
@osm0sis for AnyKernel
@nathanchance for help with upstreams
@topjohnwu for Magisk
@idkwhoiam322, @KuranKaname for being good friends
@BobAzzon, @npv12, @Gabyrx7, @Reechings and rest of my dear friends that tested the kernel (really, wouldn't be possible without you guys <3)
Contributors
nem0 aka AnnoyingZlatan
Source Code: GitHub
Version Information
Status: Stable
Created 2021-05-01
Last Updated 2021-07-20
Reserved
Reserved #2
really pru kernel, I like it
my sot tripled
jk, best kernel on here!
Best kernel ever since Nemo,,now Dora,,congrat bro,,awesome kernel,,work perfect with new official PE rom,,,
Best for A11 on OOS11 blobs and OOS11 !!!!
Ex-nem0 Kernel user here, thank you so much @AnnoyingZlatan for this one
I've just installed 1.0 with adb sideload on latest PixelExperience, all good
Love ur kernel looking forward to help u testing hehe
Toutatis_ said:
Ex-nem0 Kernel user here, thank you so much @AnnoyingZlatan for this one
I've just installed 1.0 with adb sideload on latest PixelExperience, all good
Click to expand...
Click to collapse
I'd like to try it on YAAP, but I didn't know how to go back to stock kernel. I read somebody says to restore boot.img & dtbo but not sure how to do it
Zhuang zhuang said:
I'd like to try it on YAAP, but I didn't know how to go back to stock kernel. I read somebody says to restore boot.img & dtbo but not sure how to do it
Click to expand...
Click to collapse
In Franko kernel manager you can make a backup of your current kernel. Then flash this, then restore kernel if you want it back.
Of fastbootd flash boot img from yaap, same as you most likely did when you originally installed it if you used that method. (Ps, make sure it's matching your ROM though, so you're not updated to the latest but flashing a boot image from a previous version..)
Currently using your Nemo kernel. I flashed this kernel via Franco's kernel manager but I get kicked back to my recovery..any ideas? Tia your kernels are awesome
This kernel is awesome. With Dora Freq i've the best UI performance with AOSP like LOS/CrDroid , another world compared to OOS. Thanks Dev.
bushninja07 said:
Currently using your Nemo kernel. I flashed this kernel via Franco's kernel manager but I get kicked back to my recovery..any ideas? Tia your kernels are awesome
Click to expand...
Click to collapse
Yes, this is meant for OOS 11 and A11 ROMs that switched to R blobs, as it's stated in the OP. It won't be compatible with the builds you've run Nemo on
Amazing experience out of the box, super thanks !
tested with OP7 on oos 11.0.0.2
super smooth and really impressive battery
I flashed via FKM on YAAP. Everything started good but just few minutes ago, when the screen turned off, it didn't turn on again & auto reboot. I had it 2 times in just a couple of minutes
Zhuang zhuang said:
I flashed via FKM on YAAP. Everything started good but just few minutes ago, when the screen turned off, it didn't turn on again & auto reboot. I had it 2 times in just a couple of minutes
Click to expand...
Click to collapse
Yaap has a built in logcat, perhaps check to see if there's any traces of the error. It might help Zlatan if you post that..
I have OOS 11 and and currently using a custom kernel. Should I flash OOS 11 again before your kernel? Thanks in advance.
Zhuang zhuang said:
I flashed via FKM on YAAP. Everything started good but just few minutes ago, when the screen turned off, it didn't turn on again & auto reboot. I had it 2 times in just a couple of minutes
Click to expand...
Click to collapse
I am aware of the issue. Will be fixed in next update, just a bit busy atm.
Teso79 said:
I have OOS 11 and and currently using a custom kernel. Should I flash OOS 11 again before your kernel? Thanks in advance.
Click to expand...
Click to collapse
Nope, just flashing a kernel is enough.
I have tried this version of the kernel and it feels very good! But the memory of my phone is too small, I hope there will be swap space in the future. Does the developer have plans to add zram or zswap in the future?