I can't seem to get my rotate icon to work on Developer Preview 2. I've turned off the Auto-Rotation option, but it's still not showing up. I wasn't a part of the 1st Developer Preview, but I don't think that plays a factor. Is anyone else experiencing this?
Eduardo1974 said:
I can't seem to get my rotate icon to work on Developer Preview 2. I've turned off the Auto-Rotation option, but it's still not showing up. I wasn't a part of the 1st Developer Preview, but I don't think that plays a factor. Is anyone else experiencing this?
Click to expand...
Click to collapse
it works for me. it doesn't show up unless I rotate the phone.
I can't get it to appear for the life of me! It's driving me nuts!
if you have auto-rotate enabled in display settings, it will NOT show up. If its disabled, you should see the icon if you rotate the screeen
My auto rotate is turned off (not blue), but when I go to YouTube, for example, and attempt to rotate the phone, the rotate icon toggle doesn't appear. I cannot FOR THE LIFE OF ME figure out why.
Eduardo1974 said:
My auto rotate is turned off (not blue), but when I go to YouTube, for example, and attempt to rotate the phone, the rotate icon toggle doesn't appear. I cannot FOR THE LIFE OF ME figure out why.
Click to expand...
Click to collapse
Just tested and it appears to the far right of the home button.
Sent from my Pixel 2 XL using Tapatalk
It finally works. It started showing up a few minutes ago. Go figure!
still doesn't work for me, have you done anything to enable it ?
No. It just started appearing. Very odd!
Ya. I can't get it to work either. Tried everything. Hopefully mine will "just start to work" to.
I just ended up doing a clean flash and now it works.
Related
I've just discovered that my gyro sensor doesn't work. I am running rooted stock 4.1.1. The phone can not detect tilt movements. And under Settings->Motion->Sensitivity settings->Gyroscope calibration, the blue dot does not move from the center, no matter which orientation the phone is held. All of the options under Motion don't seem to work. I just want to see if anybody else has the same problem before calling TMobile.
Firstly, this should have been posted in the q&a section.
And the blue circle isn't supposed to move. You lay the phone on a flat surface and it calibrates itself.
Sent from my SGH-T999 using Tapatalk 2
Moved to Q&A
Sorry for posting in the wrong section. You are right about the blue dot not moving. I downloaded a few apps that detect sensors and all built-in sensor seem to be working as they are supposed too. I have problem for example of taking screenshot with a palm wipe or zooming picture by tilting the device, muting phone by turning it over, etc. None of these features work on my phone. Will try to explore more to see what the real problem is.
tphone said:
Sorry for posting in the wrong section. You are right about the blue dot not moving. I downloaded a few apps that detect sensors and all built-in sensor seem to be working as they are supposed too. I have problem for example of taking screenshot with a palm wipe or zooming picture by tilting the device, muting phone by turning it over, etc. None of these features work on my phone. Will try to explore more to see what the real problem is.
Click to expand...
Click to collapse
Do you have the switch turned on next to motion in the settings?
Sent from my SGH-T999 using Tapatalk 2
tphone said:
I've just discovered that my gyro sensor doesn't work. I am running rooted stock 4.1.1. The phone can not detect tilt movements. And under Settings->Motion->Sensitivity settings->Gyroscope calibration, the blue dot does not move from the center, no matter which orientation the phone is held. All of the options under Motion don't seem to work. I just want to see if anybody else has the same problem before calling TMobile.
Click to expand...
Click to collapse
Before you go off the deep end, run the test on the sensor.
in the stock dialer:
Quick Test Menu
*#7353#
select the accelerometer tester and ilt the phone whatever way you want. If the arrows don't change, then the sensor isn't working. If the Arrows do change, then all good, no panic necessary...
Good Luck
Aloha
Thank you for your help. I ran the sensor test and the sensors work. I also turned on the Motion switch but the Motion features still don't work for me. Maybe this is a software issue. I will continue to explore and will report back if I've found something.
tphone said:
Thank you for your help. I ran the sensor test and the sensors work. I also turned on the Motion switch but the Motion features still don't work for me. Maybe this is a software issue. I will continue to explore and will report back if I've found something.
Click to expand...
Click to collapse
Hi,
Please do the following:
Pull the top notification bar down by using a downward swipe.
Tap on the Toothed Wheel in upper right corner
scroll down till you see the System divider (below the Add account line)
is Motion ON on the right side of it? if not, turn it on.
Tap on the word Motion
Are any of the options you want to use set with a check in the box?
if not, put the check in whatever you want to use by tapping on the box on the right of the function.
Example:
If you want to use Palm swipe for screen captures, tap on the box on the right of the option.
the boxes toggle these options so if you want the option off, then tap on the checkmark and it'll go off.
When you're done, click on the back button on the right side of the menu bar below the screen till you get back to the homescreen.
You are done, and the selected options should now function.
simple huh?
Thank you, bobolinko. I've been doing exactly what you described and no motion feature works for me. I begin to think that my software has a problem, because it does crash occasionally and software upgrade check hangs forever in the "checking for software updates..." screen and never comes back, no matter if I am on wifi or on 4G. Let me reinstall stock firmware and report back.
Try it like this:
http://www.youtube.com/watch?v=T4dPoY1Z6hc
Also, has it EVER worked?
Thanks!
bobolinko said:
Also, has it EVER worked?
Click to expand...
Click to collapse
Thanks for the video. I did exactly as shown and nothing happens. I never tried Motion before until I needed to capture my screen and discovered that it doesn't work for me. In the mean time, using PWR and HOME button at the same time does allow me to capture the screen, so I don't really need Motion feature working for me. I am just thinking that my software has a problem and I will need to reinstall stock. Thanks a lot for your help in any case.
bobolinko said:
Before you go off the deep end, run the test on the sensor.
in the stock dialer:
Quick Test Menu
*#7353#
select the accelerometer tester and ilt the phone whatever way you want. If the arrows don't change, then the sensor isn't working. If the Arrows do change, then all good, no panic necessary...
Good Luck
Aloha
Click to expand...
Click to collapse
im having the same issue. tried the accelerometer test and tilt the phone every which way but the arror didnt move at all. does that mean the accelerometer is done with. any fix for it?
also tried tsp dot mode, tsp grid mode, proximity and light sensors and nothing seems to happen during the test
For the life of me I can't figure out how to turn off screen record after its turned on. Am I missing something or do you just wait to the time you at runs out?
justchillin2013 said:
For the life of me I can't figure out how to turn off screen record after its turned on. Am I missing something or do you just wait to the time you at runs out?
Click to expand...
Click to collapse
You can "expand" the running notification, after that a Stop option will show...
Made a screenie for you here :good:
Pfeffernuss said:
You can "expand" the running notification, after that a Stop option will show...
Made a screenie for you here :good:
Click to expand...
Click to collapse
I tried that first and it didn't show anything to stop it. After lowering the timeout to 5 min vs 30 min it showed the ability to stop recording. I'm going to bump it back up to 30 min and see if it happens again and if so there's a bug if not just a freak thing.
Just tested it out again but didn't up the record time and this is what I got. Guess I'll just stick with scr screen recorder unless there's a fix for this. Can tap on that recording screen notification all day and it doesn't do jack have to force stop gravity box.
Expand that notification to show the stop option.
threi_ said:
Expand that notification to show the stop option.
Click to expand...
Click to collapse
Doesn't expand. I found that when the recording is started before opening a game app it works fine. Only weird thing is when in landscape the tab needs to be situated so the charge cord is on the right or the power button needs to be on the bottom or the recording is all funky. Little weird things but it seems to work just as good as scr pro which wasn't free.
Started game. Started screen recording. Dragged down notification, stop button present.
All works flawlessly. Nothing wrong with the implementation whatsoever :good:
I think it depends on Android version. GB for 4.3 may have this bug but on 4.4 there is no bugs whatorever
Pfeffernuss said:
Started game. Started screen recording. Dragged down notification, stop button present.
All works flawlessly. Nothing wrong with the implementation whatsoever :good:
Click to expand...
Click to collapse
That's what it looks like when it's working properly. Might have something to do with the game I play which is dead trigger 2 not allowing it to work. When my recording notification goes away either by waiting or force stopping there's no recording made like it didn't completely start up. No big deal just something I've encountered.
Are you using GravityBox(KK) with JB 4.3?
How to unhide the stop and toggle pointer options.
justchillin2013 said:
For the life of me I can't figure out how to turn off screen record after its turned on. Am I missing something or do you just wait to the time you at runs out?
Click to expand...
Click to collapse
Hi there; I was having issues with the screen recording feature as well, I managed to use it after I selected the option "Use stock binary" under the menu "Screen recording" of gravity box (this disables the option to record with sound though).
Now to your question, I wasn't able to find how to stop the damn thing, it turns out that after you start recording the screen you have to expand the status bar and you'll see the "recording screen" notification not showing the stop option so you have to expland the notification itself by sweeping your finger down on it and only then the stop and toggle pointer options will be shown.
Hey I can't record with sound but other than that I can record the screen without issues. Hope it helps.
justchillin2013 said:
That's what it looks like when it's working properly. Might have something to do with the game I play which is dead trigger 2 not allowing it to work. When my recording notification goes away either by waiting or force stopping there's no recording made like it didn't completely start up. No big deal just something I've encountered.
Click to expand...
Click to collapse
Hello justchillin2013 , Even i was having the same problem, no option to stop recording and toggle pointer...
I found two solutions -
1. Open Gravity box >Statusbar tweaks > Notification drawer style > And check Expand all notifications...
OR
2. As soon as you finish recording ,pull down notification panel > tap and swipe down "Recording Screen" notification...now you'll see both the options....
hope that help...
this has happening to me lot now. I could be in the middle of any app and the touch screen will just stop working totally until i lock the screen with the power button and then unlock it.
Just a wild guess, do you have DT2W/DT2S enabled?
aloy99 said:
Just a wild guess, do you have DT2W/DT2S enabled?
Click to expand...
Click to collapse
Yeah, I do have it enabled currently. Is it really that buggy?
3165dwayne said:
Yeah, I do have it enabled currently. Is it really that buggy?
Click to expand...
Click to collapse
I've experienced some issues with DT2W/S on other devices/roms, even when its a feature enabled by the kernel.
Try disabling it.
I'll be sure to try it the next time I have the issue.
bump
happening here as well. noticed the logo used for the "interruptions" settings menu pops up as an indicator at the top of the screen every time this happens. tried changing around the settings within interruptions with no luck. also have dt2w off. imgur . com/KK7riD
sumwhat1 said:
happening here as well. noticed the logo used for the "interruptions" settings menu pops up as an indicator at the top of the screen every time this happens. tried changing around the settings within interruptions with no luck. also have dt2w off. imgur . com/KK7riD
Click to expand...
Click to collapse
Hardware problem
Il you put two fingers and make some pressure between the front camera end the rear side of the phone, the screen becomes alive
My watch was working perfectly before the 5.1.1 update, but ever since the update, it is slow to wake, unable to swipe away cards from the watch face without opening them, the touch sensitivity is TERRIBLE....have to swipe over and over to get it to register, and for notifications I am unable to select "ALL"...can only select "priority" and "none".
Is anyone else having these problems?
5.1.1 problems are being discussed here if you're not aware:
http://forum.xda-developers.com/zenwatch/general/android-5-1-1-ota-files-online-t3109484
No problem in starting a new thread, though.
nhpilot43 said:
Is anyone else having these problems?
Click to expand...
Click to collapse
I noticed that the touch screen seems derpy to me too. Something is definitely weird with the toggle shade thingy. I'm having the same problem with selecting "all". You can get it, but you have to find the exact spot below and to the left and tap frantically like a dozen times. I reccomend using the test app in developer settings and open the touch test. It will display a small grid and it will trace all your touches. Don't worry if it says fail. Just notice whether or not its tracking your finger. To get it to pass you have to turn the lines green by swiping in a certain direction. Mine tracks perfectly so, for me at least, the hardware is fine. Definitely a software issue.
-Andy
Sent from my Apple Newton.
Yesterday I installed the Android M preview on my phone, and so I had to do a reset on my watch. Now all of the touchscreen wonkiness has gone away, and it's working fine!
Before I was unable to get the app list to appear by swiping from the right, but only by tapping once. Also, I couldn't swipe in the center of the screen in the mode selector shade, but only above or below the row of icons. Now that's all working as well.
So one of the reasons I updated for beta was that auto rotation feature. That even if I have it disabled my phone will suggest me on my navigation bar that I can click and change the orientation of the screen.
However I don't know if it's only me but it's not working at all. I'm on YouTube , or chrome or any other app and that aware button that should appear on my navigation but just doesn't appear at all. Every time I want to change to landscape I need to scroll my status bar and enable it on quick actions.
Anyone expericing the same problem or knows how to fix it?
Thanks for your help in advance
Not me...
How did You get P? By updating or flashing the image? Did you performed the Factory Reset?
I'm also facing the same problem. I did ota update from DP1
Auto rotate not working for me in YouTube with Beta
lywyn said:
Auto rotate not working for me in YouTube with Beta
Click to expand...
Click to collapse
You mean in full screen mode viewing, it is not going to landscape mode when video played and auto roate off?
srikanth.k39 said:
You mean in full screen mode viewing, it is not going to landscape mode when video played and auto roate off?
Click to expand...
Click to collapse
From the normal view (video at top, details and comments below) if I rotate device landscape nothing happens.
If I press the expand icon in corner of video it goes fullscreen and landscape even when holding device portrait.
lywyn said:
From the normal view (video at top, details and comments below) if I rotate device landscape nothing happens.
If I press the expand icon in corner of video it goes fullscreen and landscape even when holding device portrait.
Click to expand...
Click to collapse
Whatever is said happens to all when auto rotate is OFF.
With auto rotate ON, youtube is rotating when I rotate for me and all is working well w.r.t rotation.
My build number shows PPP2.18*****. I did not do clean install either. Just enrolled n got updated without wipe
srikanth.k39 said:
Whatever is said happens to all when auto rotate is OFF.
With auto rotate ON, youtube is rotating when I rotate for me and all is working well w.r.t rotation.
My build number shows PPP2.18*****. I did not do clean install either. Just enrolled n got updated without wipe
Click to expand...
Click to collapse
You clearly don't know what I'm talking about.
We this video with the new feature is Android P. Around 2m20s it shows the new feature that, even if you phone has the auto rotation OFF, when you rotate your device, a new icon appears on your navigation bars where you can tap and change the display to landscape. All with auto rotation OFF. To give you the opportunity to change it or not. If you have the auto rotation ON, Everytime you change your home orientation, it will go landscape mode even if you don't want to.
So that's the feature that's not working on mine. With auto rotation OFF ( how it should be ) when im in chrome, in YouTube , in all other apps and I change my screen orientation I don't get the icon appearing in navigation bar.
Jucacarvalho1987 said:
You clearly don't know what I'm talking about.
We this video with the new feature is Android P. Around 2m20s it shows the new feature that, even if you phone has the auto rotation OFF, when you rotate your device, a new icon appears on your navigation bars where you can tap and change the display to landscape. All with auto rotation OFF. To give you the opportunity to change it or not. If you have the auto rotation ON, Everytime you change your home orientation, it will go landscape mode even if you don't want to.
So that's the feature that's not working on mine. With auto rotation OFF ( how it should be ) when im in chrome, in YouTube , in all other apps and I change my screen orientation I don't get the icon appearing in navigation bar.
Click to expand...
Click to collapse
Sorry for the confusion.
What I mean is auto rotate works fine.
Even the new feature of rotation suggestion also works fine for me.
Check my screen shot attached. Rotation suggest icon is properly appearing in my nav bar when auto rotate off in youtube. However the icon appears for few seconds time limit and when we click it it stays with nav bar to re-rotate.
I shared build number to see there might be any differences due to region or something etc...
srikanth.k39 said:
Sorry for the confusion.
What I mean is auto rotate works fine.
Even the new feature of rotation suggestion also works fine for me.
Check my screen shot attached. Rotation suggest icon is properly appearing in my nav bar when auto rotate off in youtube. However the icon appears for few seconds time limit and when we click it it stays with nav bar to re-rotate.
I shared build number to see there might be any differences due to region or something etc...
Click to expand...
Click to collapse
Yeahhh it's exactly that. I don't know why it doesn't appear on mine . It's so useful when I'm at bed watching YouTube...
You did anything to activate it or it just appeared?
Jucacarvalho1987 said:
Yeahhh it's exactly that. I don't know why it doesn't appear on mine . It's so useful when I'm at bed watching YouTube...
You did anything to activate it or it just appeared?
Click to expand...
Click to collapse
I did not do anything to activate. It is working as is. Apart from changing auto rotate couple of times, nothing else I did w.r.t rotation setting.
Is ur build number same as mine?
srikanth.k39 said:
I did not do anything to activate. It is working as is. Apart from changing auto rotate couple of times, nothing else I did w.r.t rotation setting.
Is ur build number same as mine?
Click to expand...
Click to collapse
Yeah exactly the same =(