Related
Edit: solution added
problem:
after flashing a rom (in my case OP3lite or FreedomOS) you can't get past the boot logo
you have access to TWRP, so you can restore nandroid or flash flashable stock OxygenOS packages (tutorial here)
solution:
wipe: Dalvik /ART Cache, Cache, Data, System
flash your rom
try to boot (most likely will get stuck at boot logo)
boot into TWRP > Advanced > Fix Contexts, and swipe to Fix Contexts
Reboot
(wait a while, it might take a few minutes till it boots)
___________________________________________
original post:
hi,
I'm running official OxygenOS 3.1.3.
Rooted (systemless) , TWRP installed.
I don't have any problems on my rom, but everytime I flash a rom I get stuck at the boot logo.
I can just force reboot, goto twrp and restore my nandroid backup, and my phone works fine again.
But I can't flash any rom.
tried this:
Dirty flash OP3Lite rom - stuck at boot logo
wipe and install OP3Lite rom - stuck at boot logo
Restored nandroid backup, factory format, wipe and install OP3Lite rom - stuck at boot logo
wipe and install FreedomOS - stuck at boot logo
Restored nandroid backup, factory format, wipe and install FreedomOS - stuck at boot logo
wipe, Format userdata throught fastboot, install FreedomOS - stuck at boot logo
update to OxygenOS 3.2.1 (flashable zip throught twrp)
wipe and install FreedomOS - stuck at boot logo
Both roms I tried are OxygenOS 3.2.1 stock based, my problem is most likely not due to the rom I want to flash.
Anyone knows a solution for this?
is it possible that systemless root causes this problem?
are you encrypted? that might be the issue.
backup your internal sd data then go to fastboot and fastboot format userdata then flash the rom you want
Abaddon said:
are you encrypted? that might be the issue.
backup your internal sd data then go to fastboot and fastboot format userdata then flash the rom you want
Click to expand...
Click to collapse
I never did format my userdata throught fastboot, so I might be encrypted.
I'll try tomorrow and let you know if that was the solution.
@Abaddon I format my userdata throught fastboot (fastboot format userdata), but still roms wont go past the Logo . any other idea?
did you full wipe?
wiped /system too before flashing a rom then u go and flash the rom + gapps if needed
how long was it at the boot logo? no animation correct?
did u advance wipe - data, caches, system instead of factory wipe, try it 3 times
I did a few wipe 3 times, still stuck at logo.
I get stuck on this logo, never reboot, just get stuck there.
I noticed that it does flash the rom, cause if I restore my nanodroid backup layers and adblock is added.
I also get zero error while flashing in twrp.
I fixed it .
did a fill whipe, then flashed feedomOS, then tried to boot, didnt get past the logo, booted into recovery, selected "fix Contexts" and then rebooted, started without any problem .
doesent work for me..!! any help
Same here this issue keeps occuring again and again. then i always have to follow mega unbrick guide
Resurrection ROM 7.1.1 stuck at logo after every restore
nikhilsnigam said:
Same here this issue keeps occuring again and again. then i always have to follow mega unbrick guide
Click to expand...
Click to collapse
Faced this issue every time I restore any nandroid on one plus 3. It stucks at rotating resurrection logot . Even tried fix contents from TWRP, no output. Please help without a functional TWRP backup and restore - phone is useless. Only everytime mega unbrick guide needs to be repeated with painful reinstall of apps
hello guys. sorry if I'm a bit slow on this topic. I'm using the the op3t A3010 version (not dure whether I'm at the right forum or not lol) Recently I updated my phone to the new 4.1.7, in which I had already rooted the phone before with magisk v12. But right after the update, as usual, the phone will unroot and yes I did root the phone back by using the magisk v13.0 version. But it failed the safety net. So after a few 'research', I installed the superuser just in case that the safety net will work this time. But this is when it all went wrong. The phone did restart back to factory settings, but the phone is not rooted (checked by using the rootchecker app) So again, I'm back to the twrp recovery, clean wipe all the data, with hope that I can start from scratch which is from installing the magisk all over again. But after this step, it stuck at the boot logo for like more than half an hour. Than at this moment, I restart my phone back to recovery mode by long pressing the power button, and when I try to install both the magisk 12 and 13 version, there is a line of error code on the screen. There's a site that says simply go to the advance setting on the twrp interface, check fix contents and ur phone will be as good as new. After done doing that, I'm now stuck with a phone with no os installed and about 38% battery left. Can anyone help me here? This is the only phone that I had :crying: Urgent help needed here guys
Unless your original installation is without storage encryption (no dm-verity) this will happen. So next time install custom rom after flashing OB22 firmware+modem, then boot patch for dm-verity followed with custom rom and gapps then boot without wipe
i have the same problem but with p9 lite : when i tried a flash lineageOS or ResurrectionRemix my phone stucks at boot logo and when i flash the original os my phone works perfectly
sorry for my english
washichi said:
I fixed it .
did a fill whipe, then flashed feedomOS, then tried to boot, didnt get past the logo, booted into recovery, selected "fix Contexts" and then rebooted, started without any problem .
Click to expand...
Click to collapse
How long did you wait?
washichi said:
Edit: solution added
boot into TWRP > Advanced > Fix Contexts, and swipe to Fix Contexts
Reboot
(wait a while, it might take a few minutes till it boots)
Click to expand...
Click to collapse
What is the work around for CWM v6.0.5.1 Philz Touch6; it does not have Fix contexts under Advanced Functions
My issue: Tecno Spark K7 stuck at boot logo after flashing with ported ROM from Infinix XOS Chameleon . Both kernels match
This is EXACTLY my issue with the galaxy s9 plus. Gonna try the solution you wrote tommorow.
i have the same problem with galaxy s5 and the solution mentioned in the thread did not work with me.
im having the same issue but in lenovo z5 pro gt
PauloVillaflor said:
im having the same issue but in lenovo z5 pro gt
Click to expand...
Click to collapse
Search for answers HERE and if not successful, create a thread in the Q&A forum there.
You may not get any help here since this is the OP 3 forum.
Hi Guys.
im new here. hoping you guys can help me.
i accidentally wipe may system and i dont have any backups.
i try installing (lineage-14.1-20161229-UNOFFICIAL-audahadi-Z00ED)
and (Z00E_MM_13.10.7.1_Optimised_22062016)
any one of them installed success fully Via TWRP
First the (LineAge) then i wipe cache and data. and i try to reboot. but still can't boot:crying:
second one the (Z00E_MM) of course i wipe all first even data and reboot (twrp says no OS installed)
then i flash via flashboot(CMD) TWRP.img and reboot again to enter TWRP
then install boot.img and the ROM (Z00E_MM) and it successed.
and try rebooting it again via TWRP...
But Still Not Booting.:crying::crying:
what did i miss?? please Help me..:crying:
I unlocked the boot loader & installed TWRP
I tried to install official Lienage 7.1.2 after flashing & wipe cache then restarting screen went black with long vibration & blue notification led
the other 8.1 roms the TWRP Stopes when flashing after saying flashing img
may anyone tell me the problem
Arafa1994 said:
I unlocked the boot loader & installed TWRP
I tried to install official Lienage 7.1.2 after flashing & wipe cache then restarting screen went black with long vibration & blue notification led
the other 8.1 roms the TWRP Stopes when flashing after saying flashing img
may anyone tell me the problem
Click to expand...
Click to collapse
Flash twrp via fastboot.
Boot to twrp via
Fastboot boot twrp.img
Replace "twrp" with the file name of your twrp.
Once twrp booted, go into reboot menu. And reboot to recovery again. That will make your phone boot again into twrp, but this time with more rights.
Go into wipe. Advanced wipe
Change data partition file system to ext4.
Reboot again into twrp via the reboot menu ,just like before.
Now go into wipe again, and format system,data,dalvik and cache.
Flash your rom.
Flash gapps (if not otherwise stated by ROM thread)
Flash Magisk (optional, if you want root)
Wipe dalvik and cache.
Reboot. And enjoy
Sent from my Lenovo P2a42 using XDA Labs
sm00th4f3 said:
Flash twrp via fastboot.
Boot to twrp via
Fastboot boot twrp.img
Replace "twrp" with the file name of your twrp.
Once twrp booted, go into reboot menu. And reboot to recovery again. That will make your phone boot again into twrp, but this time with more rights.
Go into wipe. Advanced wipe
Change data partition file system to ext4.
Reboot again into twrp via the reboot menu ,just like before.
Now go into wipe again, and format system,data,dalvik and cache.
Flash your rom.
Flash gapps (if not otherwise stated by ROM thread)
Flash Magisk (optional, if you want root)
Wipe dalvik and cache.
Reboot. And enjoy
Click to expand...
Click to collapse
Thx alot
But I have one more question
Should the bootloader to be marshmallow or nougat?
Arafa1994 said:
Thx alot
But I have one more question
Should the bootloader to be marshmallow or nougat?
Click to expand...
Click to collapse
What do you mean The bootloader is the bootloader.
Danoz88 said:
What do you mean The bootloader is the bootloader.
Click to expand...
Click to collapse
In my moto Z Play some roms needs Nougat bootloader like xperince
So Iam asking If some roms needs nougat bootloader in Lenovo P2
Arafa1994 said:
So Iam asking If some roms needs nougat bootloader in Lenovo P2
Click to expand...
Click to collapse
We only have one bootloader.
We have different firmwares though like nougat and marshmallow.
You will need Firmwares S244 for nougat ROMs.
That firmware must be flashed through ota. Stockrom-feature. Simply using twrp does not count as doing otas.
Basic starter things: Have Firmware S244 or S251 installed through stock ota feature.
Then use my earlier stated instructions.
Thx alot it worked & no problems
I wiped the phone clean and tried to flash the new version of AEX But, it showed Error 7.
Tried looking for fix for Error 7 on internet, it didn't work for AEX5.6, 5.5, 5.4.
5.3 installs normally.
But felt like needed something new.
Went on the forums to find Xtended ROM. Flashed it.
After flashing it tried flashing Nano GAPPS.. Didn't work.
Tried to system reboot and thought I can later work it out.
ROM is all fine... But, later when I got to recovery mode.
(Problem begins)
I realised I lost TWRP.
And the recovery that's there wouldn't allow me to flash anything.
It looks more like CWM recovery but with less options.
It doesn't even have a advanced wipe!
Now I'm stuck with a non rooted phone, without Google bare minimum functionalities.
Am I alone? Help me out!
UKWZ7 said:
I wiped the phone clean and tried to flash the new version of AEX But, it showed Error 7.
Tried looking for fix for Error 7 on internet, it didn't work for AEX5.6, 5.5, 5.4.
5.3 installs normally.
But felt like needed something new.
Went on the forums to find Xtended ROM. Flashed it.
After flashing it tried flashing Nano GAPPS.. Didn't work.
Tried to system reboot and thought I can later work it out.
ROM is all fine... But, later when I got to recovery mode.
(Problem begins)
I realised I lost TWRP.
And the recovery that's there wouldn't allow me to flash anything.
It looks more like CWM recovery but with less options.
It doesn't even have a advanced wipe!
Now I'm stuck with a non rooted phone, without Google bare minimum functionalities.
Am I alone? Help me out!
Click to expand...
Click to collapse
For aex issue did you flash factory2vendor zip before flashing rom?
You will have to install twrp image using PC. Like the first time you did when you were unlocking bootloader
Flash zui using qfil or miflash.
If bootloader is unlocked still. You can directly flash twrp.
If not first unlock your bootloader and then flash twrp.
For treble rom like aex5.5 you need to flash factory2vendor.zip and then flash twrp with treble support.
For info on flashing and link visit aex5.5 rom page.
Have tried to clean flash latest PE Plus ROM 3 times today. I have a recovery backup of Havoc that I was able to get back to, but can't get past Google boot screen when flashing PE Plus.
Here is my process.
- Download latest Pixel Experience Plus (file name PixelExperience_Plus_whyred-9.0-20190906-0859-OFFICIAL.zip from Pixel Experience website) and save to SD card
- Download Magisk 19.3.zip from Magisk and save to SD card
- Download latest firmware from xiaomifirmwareupdater.com (stable, V10.3.2.0.PEIMIXM, 9.0 Global)
- Boot to TWRP 3.3.1-0
- Press Wipe - Wipe - Davlik, Cache, Data, System, Vendor
- Press install - Choose firmware file (stable V10.3.2.0.PEIMIXM 9.0 Global)
- Swipe to install
- Back home
- Press Install - Choose PixelExperience file from SD Card, press Add Zip, Choose Magisk 19.3zip from SD card
- Swipe to install
- After install finishes, choose swipe to reboot. Then choose swipe to install TWRP.
Phone reboots. Shows Mi logo for a couple seconds. Shows "Google" logo for a couple seconds. Google logo becomes the google multi-colored "G" with a progress bar going below the "G". Phone will stay here and not go any further.
Advice? Am I missing something in my flashing process?
Thank you in advance if you can help.
try not install magik on the first time booting
Tried to flash PE plus
used the same process
didn't flash magisk or any other type of root
same outcome, only thing different is that I lost my backup data after getting a password prompt on twrp and solve it like an idiot by wiping everything.
any help is appreciated I really like this rom :crying:
Edit: Fixed the problem by flashing again twrp recovery right after flashing the firmware, than proceeding with the same steps, Didn't take long in the fist boot. yet another problem, It's detecting my sim card and can't connect to wifi so I'm stuck on the setup; tried clean flashing another rom ( bootleggers) after I gave up on PEE but the same problem. I have no idea what to do now
I would start over with original miui fastboot rom via mi flash tool. It should make everything work again. Then you could try orangefox recovery instead of twrp to flash pixel experience rom.
lcdkhoa said:
try not install magik on the first time booting
Click to expand...
Click to collapse
when i installed PE it was clear and safe.. but install magisk 19.3 bootloop again...
nirvanakevin said:
when i installed PE it was clear and safe.. but install magisk 19.3 bootloop again...
Click to expand...
Click to collapse
Use magisk 20 .1
Redmi note 8 pro PE stuck bootloop G logo
nirvanakevin said:
when i installed PE it was clear and safe.. but install magisk 19.3 bootloop again...
Click to expand...
Click to collapse
I have a Redmi Note 8 pro used orange fox recovery and still the G google logo stuck. i tried everything its just not working
---------- Post added at 05:42 PM ---------- Previous post was at 05:38 PM ----------
nirvanakevin said:
when i installed PE it was clear and safe.. but install magisk 19.3 bootloop again...
Click to expand...
Click to collapse
Can you explain what steps you took to get the google PE to install safe
Hello,
I have a Redmi Note 8 Pro. I downloaded the ROM from PE site. https://download.pixelexperience.org/begonia. I install this ROM but after a reboot I can only see the REDMI Logog and than is a bootloop.
Any ideas?
Only way
the only way out is try clearing data partition in manage partition section of orange fox recovery or twrp,this would help but all data would be wiped.
Rarohd said:
Tried to flash PE plus
used the same process
didn't flash magisk or any other type of root
same outcome, only thing different is that I lost my backup data after getting a password prompt on twrp and solve it like an idiot by wiping everything.
any help is appreciated I really like this rom :crying:
Edit: Fixed the problem by flashing again twrp recovery right after flashing the firmware, than proceeding with the same steps, Didn't take long in the fist boot. yet another problem, It's detecting my sim card and can't connect to wifi so I'm stuck on the setup; tried clean flashing another rom ( bootleggers) after I gave up on PEE but the same problem. I have no idea what to do now
Click to expand...
Click to collapse
This is one freakin helpful information.Worked right away when facing same issue in my redmi 5a
Barker88 said:
Have tried to clean flash latest PE Plus ROM 3 times today. I have a recovery backup of Havoc that I was able to get back to, but can't get past Google boot screen when flashing PE Plus.
Here is my process.
- Download latest Pixel Experience Plus (file name PixelExperience_Plus_whyred-9.0-20190906-0859-OFFICIAL.zip from Pixel Experience website) and save to SD card
- Download Magisk 19.3.zip from Magisk and save to SD card
- Download latest firmware from xiaomifirmwareupdater.com (stable, V10.3.2.0.PEIMIXM, 9.0 Global)
- Boot to TWRP 3.3.1-0
- Press Wipe - Wipe - Davlik, Cache, Data, System, Vendor
- Press install - Choose firmware file (stable V10.3.2.0.PEIMIXM 9.0 Global)
- Swipe to install
- Back home
- Press Install - Choose PixelExperience file from SD Card, press Add Zip, Choose Magisk 19.3zip from SD card
- Swipe to install
- After install finishes, choose swipe to reboot. Then choose swipe to install TWRP.
Phone reboots. Shows Mi logo for a couple seconds. Shows "Google" logo for a couple seconds. Google logo becomes the google multi-colored "G" with a progress bar going below the "G". Phone will stay here and not go any further.
Advice? Am I missing something in my flashing process?
Thank you in advance if you can help.
Click to expand...
Click to collapse
WAIT FOR SOME TIME LIKE 10 MINUTES.. EVEN I THOUGHT IT WAS IN BOOT LOOP