Does anyone have a link for the drivers for the Epic 4G Touch? My phone is not showing up on adb and I can't seem to find them.
they should be the same one as the epic no?
http://www.samsung.com/us/support/downloads/SPH-D710ZKASPR
Should be there when they're released ... all that shows up right now is the user manual.
imtjnotu said:
they should be the same one as the epic no?
Click to expand...
Click to collapse
I don't think so.
what drivers are you refering to? are you trying to access your USB storage inside the phone on your computer or what are you trying to do? which USB drivers are you refering to?
Connect to the computer with usb debugging disabled. It will install a driver, then unplug, enable usb debugging, and you should be able to see it with adb
Sent from my SPH-D710 using xda premium
SAShady said:
Connect to the computer with usb debugging disabled. It will install a driver, then unplug, enable usb debugging, and you should be able to see it with adb
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
It installed some drivers when debug was disabled but now it is enabled and it still doesn't show in adb devices
---------- Post added at 02:36 PM ---------- Previous post was at 02:35 PM ----------
©ertifiedMuffDiver™ said:
what drivers are you refering to? are you trying to access your USB storage inside the phone on your computer or what are you trying to do? which USB drivers are you refering to?
Click to expand...
Click to collapse
I want to be able to connect via ADB. I have Win7 64 bit and can't find a driver for my phone.
PhantomPhreak53 said:
It installed some drivers when debug was disabled but now it is enabled and it still doesn't show in adb devices
---------- Post added at 02:36 PM ---------- Previous post was at 02:35 PM ----------
I want to be able to connect via ADB. I have Win7 64 bit and can't find a driver for my phone.
Click to expand...
Click to collapse
Same deal, works fine in linux though
SAShady said:
Connect to the computer with usb debugging disabled. It will install a driver, then unplug, enable usb debugging, and you should be able to see it with adb
Click to expand...
Click to collapse
I installed the USB drivers from Samsung before I connected the USB.
This method does not work.
My computer does not see my device at all, though it is charging.
it doesn't mount with debugging on or off
WTF!
Ideas?
Windows 7 32-bit
Have you tried installing Kies? It delivers E4GT drivers during installation.
Here:http://api.viglink.com/api/click?format=go&drKey=1359&loc=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D1267762%26page%3D3&v=1&libid=1316391418667&out=http%3A%2F%2Fapi.viglink.com%2Fapi%2Fclick%3Fformat%3Dgo%26drKey%3D1359%26loc%3Dhttp%253A%252F%252Fforum.xda-developers.com%252Fshowthread.php%253Ft%253D1266777%2526highlight%253Dkies%26v%3D1%26libid%3D1316390245606%26out%3Dhttp%253A%252F%252Forg.downloadcenter.samsung.com%252Fdownloadfile%252FContentsFile.aspx%253FCDSite%253DUNI_CA%2526CDCttType%253DSW%2526ModelType%253DN%2526ModelName%253DFM_UPDATE%2526idyn%253DN%2526VPath%253DSW%252F201105%252F20110512115717796%252FKies_2.0.2.11071_128.exe%26ref%3Dhttp%253A%252F%252Fforum.xda-developers.com%252Fsearch.php%253Fsearchid%253D91086814%26title%3DKIES%2520and%252032%2520%2526%252064%2520bit%2520Drivers%2520for%2520Epic%25204G%2520Touch%2520-%2520xda-developers%26txt%3Dhttp%253A%252F%252Forg.downloadcenter.samsung.co....11071_128.exe%26jsonp%3Dvglnk_jsonp_13163902411401&ref=http%3A%2F%2Fforum.xda-developers.com%2Fforumdisplay.php%3Ff%3D1284&title=%5BACS%5D%20Pre-rooted%20kernel%20-%20Page%203%20-%20xda-developers&txt=http%3A%2F%2Fapi.viglink.com%2Fapi%2Fclick%3Ffor...13163902411401&jsonp=vglnk_jsonp_13163916581211
iSaint said:
http://www.samsung.com/us/support/downloads/SPH-D710ZKASPR
Should be there when they're released ... all that shows up right now is the user manual.
Click to expand...
Click to collapse
I just checked the link. Looks like they have the drivers available now. Although I do suggest the above with Kies installation.
!!FIXED!!
Kn0wBuddy said:
Have you tried installing Kies? It delivers E4GT drivers during installation.
Click to expand...
Click to collapse
I did actually, and Kies couldn't see the phone.
Also, the phone did not see a USB connection, though it was charging
per the documentation I tried to mount as mass storage device through Wireless and Networking. This didn't do anything either, phone still charges.
I had borrowed the USB cable from a co-worker, I had him plug it in to his phone, and it works just fine, just XP machine sees his phone.
Turns out, its something with the cable.
rummaging around for another cable, I noticed I had my XOOM and its cord with me. Its the same type, but its the Moto brand one (if that makes it any different?)
plugged it in instead just for ****s and giggles. It works.
Phone just doesn't like his cable for whatever reason.
Now Win7 sees the phone, and Kies sees it (doesn't like the debugging mode but whatever)
His cable was an LG branded one. Any one know if there's something different?
I've tested 2 LG branded usb cables and they do not work. Same thing you described.
I found it in pull it out half way the phone recognizes USB and the computer sees the phone but if I try to transfer files I get a "device disconnected" error... Or something like that. I can see the files, just can't touch 'em.
I could not believe that the cable is have been using on tons of devices for years wouldn't work only on this one. I'd sooner believe it was the computer. So I grabbed a coworkers much newer LG branded cable and same thing... I still didn't believe it after testing 2 cables on 3 computers... Though I had a hunch from the first second I plugged it in I still can't believe it... And then I read this.
Explanation please, lol.
Sent from my SPH-D710 using XDA App
I downloaded Kies as well, and it did install a driver called "SAMSUNG Mobile USB Composite Device", but I don't think this is what I need (trying to root).
Whenever I open Odin w/ the phone connected, no COM port mapping number displays...
Using the USB cable that came w/ the phone.
Deleted original post.
Just go to this forum and download the USB Android Drivers from 1) Prerequisites of the Rooting process.
http://forum.xda-developers.com/showthread.php?t=1342728
FYI - I had to use the provided Samsung USB charger cable for my computer and phone to communicate. Otherwise, my phone would only charge, but it would not show up as MTP-Connected (or USB Connected).
KYT said:
I installed the USB drivers from Samsung before I connected the USB.
This method does not work.
My computer does not see my device at all, though it is charging.
it doesn't mount with debugging on or off
WTF!
Ideas?
Windows 7 32-bit
Click to expand...
Click to collapse
My exact problem and I started a thread yesterday about it --- some people have suggested some things to try, none of them worked for my case but check here and try some of this stuff
--- http://forum.xda-developers.com/showthread.php?t=1435271 ---
Like I said my issue is still occuring, I'm heading to Sprint tomorrow for a replacement
AVAH0LIC said:
My exact problem and I started a thread yesterday about it --- some people have suggested some things to try, none of them worked for my case but check here and try some of this stuff
--- http://forum.xda-developers.com/showthread.php?t=1435271 ---
Like I said my issue is still occuring, I'm heading to Sprint tomorrow for a replacement
Click to expand...
Click to collapse
Have you considered getting your USB adapter/port checked for issues? It could be possible that the adapter no longer has the ability to send data, but only charges the E4GT when connected; try using another USB port on your computer.
taufunc said:
Have you considered getting your USB adapter/port checked for issues? It could be possible that the adapter no longer has the ability to send data, but only charges the E4GT when connected; try using another USB port on your computer.
Click to expand...
Click to collapse
Tried all ports --- updated all drivers... even formatted my computer... its definitely the phone.
I have three computers here and none of them are working with it --- and the weirdest thing that I just noticed === it seems like its just showing the charging animation... I left it plugged into my computer when it was supposedly charging, screen turned off, check back in 20 minutes and it had gone down by 20% --- it's just like its triggering the charging animation
If your phone will charge but won't transfer data, there is a strong possibility it is actually a problem with the cable. I tested 3 LG micro-usb cables which all worked fine with an LG phone, but would not transfer data with the Epic 4G Touch. The would only charge. I thought my USB port was busted at first also because I tried 3 different cables and this is the first time I've encountered a situation where micro-usb cables were not universal.
sfhub said:
If your phone will charge but won't transfer data, there is a strong possibility it is actually a problem with the cable. I tested 3 LG micro-usb cables which all worked fine with an LG phone, but would not transfer data with the Epic 4G Touch. The would only charge. I thought my USB port was busted at first also because I tried 3 different cables and this is the first time I've encountered a situation where micro-usb cables were not universal.
Click to expand...
Click to collapse
Thats strange because that is all I've used were LG cables... they have worked fine for me since day one?
My Note 2 wont connect to my PC at all. It wont show the icon in the notification tray when i connect it and it doesnt show up in My Computer on the PC. Anyone here who can help? It's really frustrating. Thanks!
SaneQ said:
My Note 2 wont connect to my PC at all. It wont show the icon in the notification tray when i connect it and it doesnt show up in My Computer on the PC. Anyone here who can help? It's really frustrating. Thanks!
Click to expand...
Click to collapse
It could be a faulty USB cable - I've had a few go "bad" in that I could still use them to charge devices, but they would not work at all for any kind of data.
So my first suggestion would be to change the cable - second would be to try a different PC.
Regards,
Dave
Didn't help... Ive tried to install the drivers and kies again but with no succes. When i plug it in it only starts to charge... the usb icon doesnt even appear in the icon tray... Damn
SaneQ said:
Didn't help... Ive tried to install the drivers and kies again but with no succes. When i plug it in it only starts to charge... the usb icon doesnt even appear in the icon tray... Damn
Click to expand...
Click to collapse
What didn't help?
Changing cable? Different PC?
Regards,
Dave
Sent from my GT-N7100 using Tapatalk 2
Changing cable. I dont have a other PC, but i tried my brothers SGS3 and it had the same problem. I think its a computer based thing...
SaneQ said:
My Note 2 wont connect to my PC at all. It wont show the icon in the notification tray when i connect it and it doesnt show up in My Computer on the PC. Anyone here who can help? It's really frustrating. Thanks!
Click to expand...
Click to collapse
Upgraded to Windows 8? Had my pc updated to W8 yesterday and the usb ports didn`t work. I`am back on W7 until it is fixed.
Nah im still on W7 64-bit, but i got it to work for once just then and now it doesnt work again... Oh well atleast i got the files transferred which i needed.
Cable may be faulty........
Same problem with my Note 2......
but eventually i tried with other samsung cable (one which previously provided with my samsug galaxy S) and wooyala........it's start detecting......
It means cable provided with my phone is fault.......which does charging but doesnt connect my phone with pc for MTP or Kies.
it clearly seems to be a fault with your USB ports of computer
So Ive run into a strange problem. I was watching a movie last night on my nexus, the file was on my usb drive connected via otg to the nexus. Today I try to do the same and I get no reaction from Stickmount when plugging in the drive. I have no problems charging or connecting the tablet to my PC, and the drive works fine both connecting to the PC and to my smartphone with stickmount as well. I also tried DLing an app called OTG Troubleshooter to see if that would help me. When connecting the drive it tells me that OTG is detected, but that "Mass storage USB device is not detected in linux/android". Does anyone know what the problem is?
Thanks in advance
Nexus Media Importer
I had a similar problem with the device not recognizing the OTG cable, it went away after I installed the Nexus Media Importer.
Cazteclo said:
I had a similar problem with the device not recognizing the OTG cable, it went away after I installed the Nexus Media Importer.
Click to expand...
Click to collapse
I tried with Nexus Media Importer as well, no success there either, it doesnt detect the drive. Thanks for the tip anyway
mine does the same thing with both stickmount and nexus media importer, I even tried 3 different OTG cables and flashdrives and get the same results
gmfirebird said:
mine does the same thing with both stickmount and nexus media importer, I even tried 3 different OTG cables and flashdrives and get the same results
Click to expand...
Click to collapse
Same here, maybe somethings wrong with the nexus' usb port?
paeminem said:
Same here, maybe somethings wrong with the nexus' usb port?
Click to expand...
Click to collapse
mine usually recognizes the cable, it is the thumb drive attached to it that it usually dosent see
im no expert but i was having issues with a physical keyboard through otg
on stock rom it times out
im on cm12 may 30 2015 with elementalx kernel
after flashing i plugged in the otg with the wireless keyboard reciever
nothing. worse than stock.
i downloaded all the usb otg helpers etc what not
in conclusion
i somehow managed to get
s3c usb host drivers for android
installed them from some site that i cant remember anymore -- really dumb --. seemed sketchy but had nothing to lose
altought now i can type still getting the same crap problmes i had with stock but not as bad. time s out
gmfirebird said:
mine usually recognizes the cable, it is the thumb drive attached to it that it usually dosent see
Click to expand...
Click to collapse
I have the same problem and have just tested that connecting a mouse or keyboard to the otg works without problems, what doesnt work is a flash drive. ( I have tried different flash drives to no success)
Does anyone know what the problem might be?
paeminem said:
I have the same problem and have just tested that connecting a mouse or keyboard to the otg works without problems, what doesnt work is a flash drive. ( I have tried different flash drives to no success)
Does anyone know what the problem might be?
Click to expand...
Click to collapse
I uninstalled and then reinstalled it again and now it is working again. I think it might have been slow to update
Maybe you guys are using a Kernel with OTG+Charge option? if yes the problem maybe that you have to connect the AC charger and USB device together. If you don't need the OTG+charge you should deactivate that function.
Flash drives and SD-usb adapters, if I connect one will it recognize it?
MGREX said:
Flash drives and SD-usb adapters, if I connect one will it recognize it?
Click to expand...
Click to collapse
Yes but first u need to enable OTG connection option in settings>additional settings>OTG connection
I don't know why, but I couldn't get it to work on my Realme X for some reason (even after turning on OTG connection option on settings). It works fine on my friend's Galaxy A7.
Hello guys, when I plug my Huawei nova 3 to my PC (Windows 10) it doesn't see it, I tried installing the driver but still, the same issue also tried updating the USB bus controllers but still can't see it.
Have you enablet MTP or any mode in quick notifications?
augustinionut said:
Have you enablet MTP or any mode in quick notifications?
Click to expand...
Click to collapse
I haven't, but we found out that the USB Type C cable was damaged and only charge, so we bought a new one and it's working now