hello guys I had a big problem with my moto g5, they were flashing it by commands and everything was fine, just that by accident I omitted two commands "fastboot erase
fastboot oem fb_mode_clear ", and I put fastboot reboot and the screen went black I tried to do the fastboot but could not detect what I do? I thank you in advance for your answers.
Can your phone still boot into the bootloader?
Exanneon said:
Can your phone still boot into the bootloader?
Click to expand...
Click to collapse
no friend, does not turn on the screen, but if it detects it on my computer and when I put "fastboot devices" it does not detect it
[QUOTE="Exanneon, post: 76364176, member: 7764771"]Can your phone still boot into the bootloader?[/QUOTE]
no friend, does not turn on the screen, but if it detects it on my computer and when I put "fastboot devices" it does not detect it
Plug your device in and install RSD lite, then try to flash stock firmware from there: https://forum.xda-developers.com/showthread.php?t=2637338
.
Exanneon said:
Plug your device in and install RSD lite, then try to flash stock firmware from there: https://forum.xda-developers.com/showthread.php?t=2637338
Click to expand...
Click to collapse
no bro, is that I do not see the fastboot mode this black screen does not give if I highlight brightness or something but if the computer detects it, but not the rsd
Related
I have a really strange problem here. I've flashed my radio in the past using fastboot. My config hasn't changed.
When I go into the android sdk and run adb devices. I get one device.
When I go to run any fastboot command it hangs at 'waiting for device'
When I put fastboot devices, nothing comes up.
I'd appreciate any help
Hi DarkShadowAy
You plug in the device and go to fastboot?
If yes, then try going into fastboot FIRST. Then only plug in your cable. You will see Fastboot change to Fastboot USB.
From there, flash your desired radio version.
Hi superstick,
I typed in:
PHP:
fastboot flash radio radio.img
Got the prompt 'waiting for device' and I then plugged in the USB. Nothing changed unfortunately.
Just to make sure, did you boot into the bootloader and does it show "FASTBOOT USB"?
Yes that error mostly means that you haven't selected the fastboot option in the bootloader. You have to select the fastboot option before flashing.
frosty_ice said:
Just to make sure, did you boot into the bootloader and does it show "FASTBOOT USB"?
Click to expand...
Click to collapse
I'll take the noob award of 2011 please.
I was baffled as I was in fastboot. When you posted that I thought why doesn't it say USB? It doesn't say USB because the cable wasn't plugged in
My desk's quite messy and I didn't realise the ipod data cable was in.
Thanks
Hello!
I'm trying to fix a LG G4 that goes straight into fastboot mode when it's powered up.
I've tried several things:
1. Holding power + volume down. It goes into recovery mode but when I click yes to restoring everything, it automatically takes me back to the same fastboot screen.
2. I've installed Android-SDK and updated drivers when I plugged in the phone. When I put in 'adb devices', there is nothing. When I put in 'fastboot devices', the serial number shows up. The bootloader is locked and when I put in 'adb reboot bootloader', it says 'error: no devices/emulators found'. Then I tried both 'fastboot oem unlock' and 'fastboot flashing unlock', it gives me: 'FAILED <command write failed <Unknown error>>.
3. I've downloaded TWRP but it obviously does not do anything right now with my errors.
I unplugged the phone from the computer and now it says 0% battery, it does not charge.
I'm really confused and lost at what to do. Any help would be appreciated.
Thank you in advance!
JennV123 said:
Hello!
I'm trying to fix a LG G4 that goes straight into fastboot mode when it's powered up.
I've tried several things:
1. Holding power + volume down. It goes into recovery mode but when I click yes to restoring everything, it automatically takes me back to the same fastboot screen.
2. I've installed Android-SDK and updated drivers when I plugged in the phone. When I put in 'adb devices', there is nothing. When I put in 'fastboot devices', the serial number shows up. The bootloader is locked and when I put in 'adb reboot bootloader', it says 'error: no devices/emulators found'. Then I tried both 'fastboot oem unlock' and 'fastboot flashing unlock', it gives me: 'FAILED <command write failed <Unknown error>>.
3. I've downloaded TWRP but it obviously does not do anything right now with my errors.
I unplugged the phone from the computer and now it says 0% battery, it does not charge.
I'm really confused and lost at what to do. Any help would be appreciated.
Thank you in advance!
Click to expand...
Click to collapse
i dont know what fast boot means or is. but couldnt you just enter download mode and flash KDZ?
raptorddd said:
i dont know what fast boot means or is. but couldnt you just enter download mode and flash KDZ?
Click to expand...
Click to collapse
Hi! I did try to follow the guide to KDZ on here but I can't get into download mode. I'm literally stuck; the phone simply starts up right into fastboot mode.
I need to know the history. What model. What were you doing to get stuck in fastboot.
TheMadScientist420 said:
I need to know the history. What model. What were you doing to get stuck in fastboot.
Click to expand...
Click to collapse
Hi! It's the H810 model. My dad was watching YouTube videos when his phone suddenly turned black and went into fastboot. The phone was originally from Wind Mobile but my brother unlocked it through the web. My dad uses ChatR. In order to start up the phone now, I have to plug it to a wall outlet before it starts up into fastboot. When I plug it into my computer directly, it says 0% battery but it does not charge up.
I know a fastboot usb cable force charges. But it sounds like a more sisnister problem if its like u say. Id sent it to lg for waranty on bootloop issue
LG-H810 Qualcomm 9008
TheMadScientist said:
I know a fastboot usb cable force charges. But it sounds like a more sisnister problem if its like u say. Id sent it to lg for waranty on bootloop issue
Click to expand...
Click to collapse
Sir i ended up flashing wrong kdz to H810 and after flashing it become dead state (Qualcomm9008) mode i successfully recovered it by following this guide https://forum.xda-developers.com/att-g4/general/unbrick-9008-mode-h810-100-method-t3555231/page10
but now it won't go To DOWNLOAD MODE it goes To fastboot mode instead i've tried deffirent LAF.imges but no success !
here is what is on the phone screen when i connect it to pc!
(Product name-msm8992_spr_us
Variant msm8992_p1_spr_usToshiba 32GB
bootloader version -
basevand version -
serial number- LGLS991b77257e1
signing production
secureboot disabled
lock state-locked
can u help?
please (thanx)
And another one who converted his device by using qfil..
Sent from my LG-H815 using XDA Labs
JennV123 said:
Hello!
I'm trying to fix a LG G4 that goes straight into fastboot mode when it's powered up.
I've tried several things:
1. Holding power + volume down. It goes into recovery mode but when I click yes to restoring everything, it automatically takes me back to the same fastboot screen.
2. I've installed Android-SDK and updated drivers when I plugged in the phone. When I put in 'adb devices', there is nothing. When I put in 'fastboot devices', the serial number shows up. The bootloader is locked and when I put in 'adb reboot bootloader', it says 'error: no devices/emulators found'. Then I tried both 'fastboot oem unlock' and 'fastboot flashing unlock', it gives me: 'FAILED <command write failed <Unknown error>>.
3. I've downloaded TWRP but it obviously does not do anything right now with my errors.
I unplugged the phone from the computer and now it says 0% battery, it does not charge.
I'm really confused and lost at what to do. Any help would be appreciated.
Thank you in advance!
Click to expand...
Click to collapse
Try to type into the terminal: 'fastboot continue'. This should make the system start up.
JennV123 said:
Hello!
I'm trying to fix a LG G4 that goes straight into fastboot mode when it's powered up.
I've tried several things:
1. Holding power + volume down. It goes into recovery mode but when I click yes to restoring everything, it automatically takes me back to the same fastboot screen.
2. I've installed Android-SDK and updated drivers when I plugged in the phone. When I put in 'adb devices', there is nothing. When I put in 'fastboot devices', the serial number shows up. The bootloader is locked and when I put in 'adb reboot bootloader', it says 'error: no devices/emulators found'. Then I tried both 'fastboot oem unlock' and 'fastboot flashing unlock', it gives me: 'FAILED <command write failed <Unknown error>>.
3. I've downloaded TWRP but it obviously does not do anything right now with my errors.
I unplugged the phone from the computer and now it says 0% battery, it does not charge.
I'm really confused and lost at what to do. Any help would be appreciated.
Thank you in advance!
Click to expand...
Click to collapse
Just type "fasboot reboot" ..it should boot normally or just press power button for 10 seconds and release
Hy
I had an unlocked bootloader phone. Yesterday I flashed the new Android 6, Europe version from the Huawei blog forum, no beta, on my Huawei GX8. I used the method, dload on SD card, Phone off an the press Volume down+volume up+Power button.The flashing was normaly.
Now the phone starts normaly but I can´t start fastboot. When the phone is off and i press Vol down + Power the phone start the android system and the Huawei logo is coming not the fastboot Modus. I can see my phone and the order under Windows but i can not control my phone with the fastboot command. (example: fastboot device. the answere ist searching devices, but it comes no resolution) I loaded the last version of Fastboot, but the problem is the same.
Please can you help me. What can i do? Many thanks for your help!
Should be connect the charger cable to the phone.
charger or computer
excuse me for bad english
No i use a data cable, debugging is on. I can copy data from my phone to PC or from PC to phone, but fastboot does not found my device.
bertl237 said:
No i use a data cable, debugging is on. I can copy data from my phone to PC or from PC to phone, but fastboot does not found my device.
Click to expand...
Click to collapse
And when you use adb to reboot to bootloader, what happen? Do you have "Minimal adb and fastboot tool" installed?
krispin said:
And when you use adb to reboot to bootloader, what happen? Do you have "Minimal adb and fastboot tool" installed?
Click to expand...
Click to collapse
Sorry for my question, what´s the differents about adb and fastboot tool? I have install the last version of minimal adb and the fastboot tool, also the Windows driver for the phone. Debugging is on. I try to connect my phone about the fastboot terminal. When i try to set the phone into the bootloader mod with the fastboot terminal and the equivalent command, fastboot say´s "searching phone". My phone does not react.
bertl237 said:
Sorry for my question, what´s the differents about adb and fastboot tool? I have install the last version of minimal adb and the fastboot tool, also the Windows driver for the phone. Debugging is on. I try to connect my phone about the fastboot terminal. When i try to set the phone into the bootloader mod with the fastboot terminal and the equivalent command, fastboot say´s "searching phone". My phone does not react.
Click to expand...
Click to collapse
So, you connect your phone, open minimal adb and fastboot too, run "adb devices", you see device id? If yes, run "adb reboot bootloader" . Phone shoult reboot to fastboot mode. Then run "fastboot devices" to see if it is connected properely.
i did it, like you described, but i see not my device id. Only the note "seach device"
Is it possible that TWRP is defect on my device? Is TWRP necessary for fastboot or only for root?
bertl237 said:
i did it, like you described, but i see not my device id. Only the note "seach device"
Is it possible that TWRP is defect on my device? Is TWRP necessary for fastboot or only for root?
Click to expand...
Click to collapse
No, you should be able to use adb and fastboot with stock recovery.
After first adb command you shoult approve authorization on your phone.
Here is screenshot from minimal adb...
Phone must be in MTP mode.
And here is phone in fastboot
Many thanks for your help, now I m in my bootloader.
2 problems i had.
1. My daemon was not started correctly, i have not seen my device.
2. I used the wrong command. I started with fastboot, not with the command adb device. I tap „fastboot reboot-bootloader“,but the correct command is “adb reboot-bootlader“
Now i have seen my phone is unlocked, i hope i can root my android 6.
bertl237 said:
Many thanks for your help, now I m in my bootloader.
2 problems i had.
1. My daemon was not started correctly, i have not seen my device.
2. I used the wrong command. I started with fastboot, not with the command adb device. I tap „fastboot reboot-bootloader“,but the correct command is “adb reboot-bootlader“
Now i have seen my phone is unlocked, i hope i can root my android 6.
Click to expand...
Click to collapse
Just reboot to fastboot and flash surdu-petru version of TWRP recovery 3.0.2 with command "fastboot flash recovery xxxxx.img". And than reboot to recovery and flash supersu zip.
my device came with unlocked bootloader, so I tried to flash twrp but every time i type "fastboot flash recovery C:\adb\twrp-3.2.1-3-whyred.img" and hit enter, the device seems to disconnect from pc and there is "press any key to reboot" in fastboot on my phone.
How can I solve this issue?`
Phone gets detected by adb/fastboot tool so its not a driver problem. I tried different cables and usb ports aswell.
Firmware is latest global stable.
Nazukii said:
my device came with unlocked bootloader, so I tried to flash twrp but every time i type "fastboot flash recovery C:\adb\twrp-3.2.1-3-whyred.img" and hit enter, the device seems to disconnect from pc and there is "press any key to reboot" in fastboot on my phone.
How can I solve this issue?`
Phone gets detected by adb/fastboot tool so its not a driver problem. I tried different cables and usb ports aswell.
Firmware is latest global stable.
Click to expand...
Click to collapse
try upgrade your android sdk on your pc
Nazukii said:
my device came with unlocked bootloader, so I tried to flash twrp but every time i type "fastboot flash recovery C:\adb\twrp-3.2.1-3-whyred.img" and hit enter, the device seems to disconnect from pc and there is "press any key to reboot" in fastboot on my phone.
How can I solve this issue?`
Phone gets detected by adb/fastboot tool so its not a driver problem. I tried different cables and usb ports aswell.
Firmware is latest global stable.
Click to expand...
Click to collapse
Well if you already had adb in your pc, rename the twrp file to recovery, you don't have to move the twrp from download folder, open download folder press shift and right click then select open cmd here, on cmd type "adb device" to see if your device connected, then after that type this "fastboot flash recovery recovery.img" press enter than after that type "fastboot boot recovery.img" TEAMWIN logo should appear on your device and then you can unplug your device. Hope this useful
i am trying to flash twrp there is no folder called adb i have installed the 15 second adb and all so i have got this minimal adb flashboot and i tried with that and got this ---- FAILED (remote: Flashing is not allowed in Lock State). i have granted all usb and oem unlocking. please help with this
Phone shows unlocked during the boot?
I had the same Problem,after a Factory Reset works for me.
I am on Miglobe-Rom Miui10 8.6.28.
Minimal ADB is enough.
Or use this from Attachment.
Unpack with Win.zip and copy Twrp in this Folder.
Conect the Phone with your Pc ,boot into Bootloader and click "cmd-here.exe"
Use this Command
fastboot flash recovery twrp-3.2.1-3-whyred.img
@Nazukii - Quick question - any chance you could try running GameBench on your device, and see if our background service dies when the device is disconnected from the PC? I don't have a Note 5 Pro to test, and I've got some user complaints. Any assistance would be awesome!
J
gamebenchjake said:
@Nazukii - Quick question - any chance you could try running GameBench on your device, and see if our background service dies when the device is disconnected from the PC? I don't have a Note 5 Pro to test, and I've got some user complaints. Any assistance would be awesome!
J
Click to expand...
Click to collapse
Have you fixed your app to run on Magisk-SU ?
otonieru said:
Have you fixed your app to run on Magisk-SU ?
Click to expand...
Click to collapse
Hey Otonieru,
Not yet, but I've got one of the engineers working on it - hopefully it'll be up in the next 30 days or so
Same problem here after updating my gcam was not working was enabling hall again but it is not booting into twrp
Redmi Note 5 pro
So my Bootloader is locked,
My phone stuck in MI recovery idk how.
I cant install MIUI via fastboot. Im stuck ..
Can anyone please help me here not sure how to proceed further.
If you have made sure that you have all the drivers installed and still have not solved, you need to use an Intel-based PC / notebook and use a usb 2.0.
”Well if you already had adb in your pc, rename the twrp file to recovery, you don't have to move the twrp from download folder, open download folder press shift and right click then select open cmd here, on cmd type "adb device" to see if your device connected, then after that type this "fastboot flash recovery recovery.img" press enter than after that type "fastboot boot recovery.img" TEAMWIN logo should appear on your device and then you can unplug your device. Hope this useful”
i did that but it is showing failed（too many links）and "press any key to reboot" showing on my phone's fastboot screen
Fastboot boot recovery.img flashing problem on Redmi note 5 pro
My bootloader is unlocked and my oem as well as usb deb is on. After i connect my phone in fastboot mode to my pc. The cmd shows fastboot devices but when it comes to fastboot boot recovery.img flashing device get disconnected. Plzzzzzz let me know a solution for this. A solution for this will be highly appreciateable.
hi devs
i flashed accidentially Chinese recovery rom on my whyred now i m unable to switch from Chinese to global version as i tried every method fastboot,recovery,qfil,mi flash and edl mode i mean every possible way but all in vain as every method ended with error and my fastboot command is locked.
so what can i do please suggest me
it's Chinese miui 11
guys please help me i m frustrated tried every available method on internet downloaded tons of file.
aliasgertaj said:
guys please help me i m frustrated tried every available method on internet downloaded tons of file.
Click to expand...
Click to collapse
What you are trying to do? Just switch from Chinese to Global? or your device is bricked now?
What did happen after that you flashed the Chinese recovery ROM?
What modes do you have available?
Did you unlock bootloader previously?
SubwayChamp said:
What you are trying to do? Just switch from Chinese to Global? or your device is bricked now?
What did happen after that you flashed the Chinese recovery ROM?
What modes do you have available?
Did you unlock bootloader previously?
Click to expand...
Click to collapse
i m not bricked as my device is working fine
but now no fastboot command working i m not able to flash custom recovery
i tried fastboot method , used miflash method every miflash from old to newest , qfil edl mode method with miflash and qualcomm flash tool
i m just able to switch between china stable n developer rom
if i m able to unlock ma fastboot command then i can flash atleast custom recovery .
kindly help me as all method ended up every time with diffrent error.
aliasgertaj said:
i m not bricked as my device is working fine
but now no fastboot command working i m not able to flash custom recovery
i tried fastboot method , used miflash method every miflash from old to newest , qfil edl mode method with miflash and qualcomm flash tool
i m just able to switch between china stable n developer rom
if i m able to unlock ma fastboot command then i can flash atleast custom recovery .
kindly help me as all method ended up every time with diffrent error.
Click to expand...
Click to collapse
Fastboot flashing commands won't work if you have bootloader locked.
Did you unlock bootloader previously and probably get locked again?
Did you enable all the proper options on Developer section, i.e. USB debugging and check if device is recogniced on adb commands?
What do you get with "fastboot getvar all"?
subwaychamp said:
fastboot flashing commands won't work if you have bootloader locked.
Did you unlock bootloader previously and probably get locked again?
Did you enable all the proper options on developer section, i.e. Usb debugging and check if device is recogniced on adb commands?
What do you get with "fastboot getvar all"?
Click to expand...
Click to collapse
thanks a lot dude i m on unlock boot loader .
But bootloader some time works means sometimes it shows my device name after available device command it shows only ???????? Fastboot devices
i tried all way possible but none of them worked.
And i m unable to switch from china to global.
Only i can do is switch between china stable to developer.
i tried getvar command but it gave me this
PS C:\adb> adb reboot bootloader
error: device '(null)' not found
PS C:\adb> fastboot getvar all
getvar:all FAILED (command write failed (Unknown error))
finished. total time: 5.007s
PS C:\adb>
aliasgertaj said:
i tried getvar command but it gave me this
PS C:\adb> adb reboot bootloader
error: device '(null)' not found
PS C:\adb> fastboot getvar all
getvar:all FAILED (command write failed (Unknown error))
finished. total time: 5.007s
PS C:\adb>
Click to expand...
Click to collapse
And you said you enabled USB debuging?!? you didn't. First enable it under development tools.
MAKE SURE YOUR USING RIGHT ADB/FASTBOOT TOOLS AND DRIVERS.
After 'adb reboot bootloader' use 'fastboot devices'. You can change usb cable and if you still get errors try using usb hub.
If all above fails than try it on WIN7 PC.
aliasgertaj said:
thanks a lot dude i m on unlock boot loader .
But bootloader some time works means sometimes it shows my device name after available device command it shows only ???????? Fastboot devices
i tried all way possible but none of them worked.
And i m unable to switch from china to global.
Only i can do is switch between china stable to developer.
Click to expand...
Click to collapse
aliasgertaj said:
i tried getvar command but it gave me this
PS C:\adb> adb reboot bootloader
error: device '(null)' not found
PS C:\adb> fastboot getvar all
getvar:all FAILED (command write failed (Unknown error))
finished. total time: 5.007s
PS C:\adb>
Click to expand...
Click to collapse
I think you are not properly booted to the proper state while you're trying certain commands. Just to be clear; adb works while your device is power on and fastboot commands will work only while your device is in fastboot mode not while on adb mode. A way to be sure that you are doing properly is enabling USB debugging first but while connected device with PC, a prompt will appear from device screen and then tap on "always allow", then you have to type "adb devices" and follow step by step, if device is recognized you can go to the next step with "adb reboot bootloader" then in fastboot you have to see the bunny otherwise is not properly in fastboot mode, then you can follow with "fastboot devices" and so on, keep in mind that any command will work until device is properly recognized.
SubwayChamp said:
I think you are not properly booted to the proper state while you're trying certain commands. Just to be clear; adb works while your device is power on and fastboot commands will work only while your device is in fastboot mode not while on adb mode. A way to be sure that you are doing properly is enabling USB debugging first but while connected device with PC, a prompt will appear from device screen and then tap on "always allow", then you have to type "adb devices" and follow step by step, if device is recognized you can go to the next step with "adb reboot bootloader" then in fastboot you have to see the bunny otherwise is not properly in fastboot mode, then you can follow with "fastboot devices" and so on, keep in mind that any command will work until device is properly recognized.
Click to expand...
Click to collapse
thanks bro
yesterday i used xiaomitool v2 as it reboot automatically device in fastboot mode but as i said after in fastboot mode it doesn't boot in adb mode.
and what is proper method to open fastboot mode i m doing it by holding power and volume down button.
drnightshadow said:
And you said you enabled USB debuging?!? you didn't. First enable it under development tools.
MAKE SURE YOUR USING RIGHT ADB/FASTBOOT TOOLS AND DRIVERS.
After 'adb reboot bootloader' use 'fastboot devices'. You can change usb cable and if you still get errors try using usb hub.
If all above fails than try it on WIN7 PC.
Click to expand...
Click to collapse
thanks for response bro
i did it under developer option and trusted my computer connection also and install adb fastboot devices many time changed cable and port but nothing happen. i tried fastboot files of china stable rom but it also doesn't worked
aliasgertaj said:
thanks bro
yesterday i used xiaomitool v2 as it reboot automatically device in fastboot mode but as i said after in fastboot mode it doesn't boot in adb mode.
and what is proper method to open fastboot mode i m doing it by holding power and volume down button.
Click to expand...
Click to collapse
Just trying to determine what your words exactly mean when you say "after in fastboot mode it doesn't boot in adb mode." ... without entering in more technical insights adb works when device is on, no sense to boot to fastboot to try to boot to adb after that (?)
If you can boot to fastboot what you have to try firstly is unlock bootloader or be sure that is already unlocked using
Code:
fastboot oem device-info
if your device is or get unlocked then you can try to flash or just boot to a custom recovery but if you can't determine until now if your device is really unlocked then you couldn't go further.
The hardware method to enter to fastboot is from a device off; pressing both pwr and vol down buttons but if the bunny is not displayed probably you didn't really get fastboot mode.
SubwayChamp said:
Just trying to determine what your words exactly mean when you say "after in fastboot mode it doesn't boot in adb mode." ... without entering in more technical insights adb works when device is on, no sense to boot to fastboot to try to boot to adb after that (?)
If you can boot to fastboot what you have to try firstly is unlock bootloader or be sure that is already unlocked using
Code:
fastboot oem device-info
if your device is or get unlocked then you can try to flash or just boot to a custom recovery but if you can't determine until now if your device is really unlocked then you couldn't go further.
The hardware method to enter to fastboot is from a device off; pressing both pwr and vol down buttons but if the bunny is not displayed probably you didn't really get fastboot mode.
Click to expand...
Click to collapse
i m frustrated now tried all the thing tried official flash tool official build but even official build by miflash official latest tool unable to flash image
i bought my device to official xiaomi service center they told it will be done in an hour but after couple of hour they returned my phone that it cant be updated.??????
shame on xiaomi that they implemented a method that they themselves also don't know how to revert it.
aliasgertaj said:
i bought my device to official xiaomi service center they told it will be done in an hour but after couple of hour they returned my phone that it cant be updated.??????
shame on xiaomi that they implemented a method that they themselves also don't know how to revert it.
Click to expand...
Click to collapse
Do yo use WIN10? Find PC with Win7... and install adb/fastboot app and drivers. Than try..
Is your system working now?
Just unlock your bootloader and install OrangeFox recovery than you can flash whatever you need.
Problem solved.
drnightshadow said:
Do yo use WIN10? Find PC with Win7... and install adb/fastboot app and drivers. Than try..
Is your system working now?
Just unlock your bootloader and install OrangeFox recovery than you can flash whatever you need.
Problem solved.
Click to expand...
Click to collapse
ok bro i will try today with another pc and update you
aliasgertaj said:
ok bro i will try today with another pc and update you
Click to expand...
Click to collapse
thanks installed twrp on other pc running on windows 7 but now internal storage goes 0mb unable to mount system
aliasgertaj said:
thanks installed twrp on other pc running on windows 7 but now internal storage goes 0mb unable to mount system
Click to expand...
Click to collapse
Wtf .. what's wrong with you.. you did everything we said wrong... Where and when did I told you to install TWRP????
I'm done with you...
Good luck with china ROM.
Ignorance is a bliss.
drnightshadow said:
Wtf .. what's wrong with you.. you did everything we said wrong... Where and when did I told you to install TWRP????
I'm done with you...
Good luck with china ROM.
Ignorance is a bliss.
Click to expand...
Click to collapse
thanks dude i installed twrp wipe my internal storage there is some error then some tricks goes perfect as i supposed and woohaa i installed masik port edition and now my phone works fine.
aliasgertaj said:
thanks dude i installed twrp wipe my internal storage there is some error then some tricks goes perfect as i supposed and woohaa i installed masik port edition and now my phone works fine.
Click to expand...
Click to collapse
TWRP can't bypass encryption, when you have no access to read data (0mb) then you have to format it, to avoid that is always recommended use OrangeFox, just for future reference, if you understand that you can flash OrangeFox through TWRP for better experience.
Also you can use this tool to help you to automate some stuff https://github.com/Szaki/XiaomiADBFastbootTools