hello dear arc members, thx visint here & tryin to help
first of all, make sure u match these criterias:
- u have CM (9,10.1 or 10.2) installed
- u have a ACTUAL backup of ur ROM, and know what to do if u get a bootloop!
- pc, some little time to invest & least a bit knowledge
if yes, pls forward :
i need some test for some transition animations i've made for CM, the thing i need some confirmation to may post it on other thread, i allready tried on friends CM phone samsung s2 which is xhdpi -> worked :good:, so now i need ur help to confirm it for sure , so i can may post it also on other forums (or ingeneral for cm)
thanks in advice
what to do??:
1.go to my thread, and download 1 or 2 ANIM for CM (the Z1 were be good):
2.follow the install instructions. (wisely)
3.now off to the report, i need to know:
- if u get bootloop make sure u wiped dalvik once/ & did the install right. (PLS DONT USE vr themer!!!!)
- does all anim work proper?? (toast-;dialog-;app-to-app-;settings & launcher) should all work, if it looks like thers no anim, PLS REPORT!
- also if phone stucks or reboots pls report, but make sure its STABLE BFORE.
thx to all i will close this as its solved.
2md time very thx:fingers-crossed:
Hello and Sorry for my bad english.
To enable multi-user at the tab 3 10.1, first you musst root your stock rom.
Then instal BusyBox from the playstore open it and instal.
Now you take a build.prop editor (maybe from playstore) and open, now add a new property.
Name it: fw.max_users
At the key you fill how many users you want (2 at my tab)
Save and Reboot!
Now in the options, you shold can add new users.
Did you try this?
I had to modify my framework-res.apk to enable MultiUser.
Yes, i have it so on my P5210. Works perfekt!
I tried it today, but it didn't work for me. I ended up in a bootloop. Had to copy back the original build.prop to boot my Tab3 again.
Think the solution with build.prop doesn't work on all devices. I'm using a Galaxy Tab3 10.1 (GT-P5200) / P5200XXUAMK7 [4.2.2].
What is your device/firmware?
It's a bit confusing why some have to edit the build.prop and others have to modify framework-res.apk.
Does this really work? Just wondering, because I thought we had to use the xposed framework hack. Man it would be great if it's just a build.prop addition. You may want to tell the dev's of the pimpdroid, and grievous roms if this is all it takes to get multi user on 5210.
bernd13 said:
Hello and Sorry for my bad english.
To enable multi-user at the tab 3 10.1, first you musst root your stock rom.
Then instal BusyBox from the playstore open it and instal.
Now you take a build.prop editor (maybe from playstore) and open, now add a new property.
Name it: fw.max_users
At the key you fill how many users you want (2 at my tab)
Save and Reboot!
Now in the options, you shold can add new users.
Click to expand...
Click to collapse
Thank you, for this solution.
Tested with success on P5210 stock 4.4.2
how we answer the call with swipe look like samsung or hold green square ? (witout rooting )
i rooted my device ^_^ now you can tell me any way for rooted nokia x
easy
The_WarriorII said:
i rooted my device ^_^ now you can tell me any way for rooted nokia x
Click to expand...
Click to collapse
if u've got root access just install a custom rom!! u'll get everything u want
the best custom rom! stable! is of dhacker9 ! available in android orignal development section of nokia x forum
just install that n u'll get what u want
pls dont forget to hit thanks pls
bunty786 said:
if u've got root access just install a custom rom!! u'll get everything u want
the best custom rom! stable! is of dhacker9 ! available in android orignal development section of nokia x forum
just install that n u'll get what u want
pls dont forget to hit thanks pls
Click to expand...
Click to collapse
ok , but some custom rom have some problem ,what about that custom rom ?
can i do every thing in a orginal rom ?
and where is dhacker9 rom ? i can not find that !
The_WarriorII said:
ok , but some custom rom have some problem ,what about that custom rom ?
can i do every thing in a orginal rom ?
and where is dhacker9 rom ? i can not find that !
Click to expand...
Click to collapse
install LEWA os (custom rom) best custom roms out there..! everythings works like charm.!
smooth/fast
download the smoothest version from here
https://docs.google.com/file/d/0B3pCNOGBTi1WSmVSRy1WZVYxR1U/edit
pls hit thnxx broder :good:
bunty786 said:
install LEWA os (custom rom) best custom roms out there..! everythings works like charm.!
smooth/fast
download the smoothest version from here
https://docs.google.com/file/d/0B3pCNOGBTi1WSmVSRy1WZVYxR1U/edit
pls hit thnxx broder :good:
Click to expand...
Click to collapse
i installed that custom rom but i do not like that ! then i restore my backup and back to my orginal rom
but i see some thing good on that custom rom ! the status bar was good on that ! can i install only that status bar in my phone i the orginal rom ?
The_WarriorII said:
i installed that custom rom but i do not like that ! then i restore my backup and back to my orginal rom
but i see some thing good on that custom rom ! the status bar was good on that ! can i install only that status bar in my phone i the orginal rom ?
Click to expand...
Click to collapse
just dump ur rom and modify according to ur wish,.... or other method... just install xpoosed framework and just modify ur preinstalled status bar to any modified uh want :good:
hit thnx
dear bunty iam a beginner and i donot understand any think you sayd to me
can you tell what i should to do with xpoosed ? plz tell me step by step ,,tnx ^_^
cheers
The_WarriorII said:
dear bunty iam a beginner and i donot understand any think you sayd to me
can you tell what i should to do with xpoosed ? plz tell me step by step ,,tnx ^_^
Click to expand...
Click to collapse
Requirement:-
1.Custom REcovery (very imp)
2.make nandroid backup before doing anything
3.xposed framework.apk
4. li'l bit common knowledge
5.modules
In this thread, I'm presenting a framework which gives you the possibility to modify your ROM - without modifying any APK (developers) or flashing (users)!
Quote:
Quick guide what kind of posts is allowed in this thread and what is not allowed.
If you don't follow the rules, you might get notified (sometimes friendly, sometimes angrily) that you're doing it wrong, but your post might as well be ignored.
NO posts without reading at least the first two posts and searching the thread => I and other people have spent hundreds of hours developing and supporting Xposed, we expect at least this much of respect
NO support for any modules here => use the module's forum instead, don't even try to post here
NO questions whether there is a module for XYZ exists => check the builtin repository and this thread: http://forum.xda-developers.com/show....php?t=2327541
NO requests for new modules => check this thread if it has been requested before, otherwise ask nicely there: http://forum.xda-developers.com/show....php?t=2327541
NO, you don't get any support via PM either => for the points above, do as pointed out, for allowed things always post in this thread (unless you want to share logs with sensitive data)
YES, you can report bugs for the framework => make sure that you followed the instructions and can reproduce it without any active modules
YES, you can get support if you have issues with the Xposed Installer (e.g. you can't install the framework) => make sure you read the instructions and searched in the thread for similar problems
YES, I will support module developers with specific questions (e.g. how to hook a certain method) => you must have read the development tutorial and give as much context as needed to make it easy for me or others to answer (code always helps!)
YES, you can suggest new features for the API (as a module developer) or the Xposed Installer here => again, no requests about modules
For a quick start, have a look at XDA's "Android Basics 101" on Xposed: http://www.youtube.com/watch?v=uRR0Flqx9M8
Some technical details:
I extended the /system/bin/app_process executable to load a JAR file on startup. The classes of this file will sit in every process (including the one for system services) and can act with their powers. And even more: I have implemented something that allows developers to replace any method in any class (may it be in the framework, systemui or a custom app). This makes Xposed very powerful. You can change parameters for the method call, modify the return value or skip the call to the method completely - it's all up to you! Also replacing or adding resources is easy.
Advantages:
No need to modify any APKs. This means:
No need to decompile, change things in smali, compile, sign, ...
It will work for odexed and deodexed ROMs.
Your mod is not bound to a specific version of the ROM. Unless there is a major change in the methods called for a certain functionality, your mod will continue to work even when you upgrade your ROM. Hell, it will probably even work with different ROMs.
Multiple mods can be installed at the same time, even if they change the same package. So you can use these battery icons and those quick toggles. Even hooking the same method twice is possible. Of course, this only works properly if the mods are not trying to do incompatible things.
It does its magic at runtime. That means you can implement options to let the user decide if they prefer the bikeshed to be painted in red or blue. Or you can have some extra logic for certain ROMs without building different mod versions.
It can be disabled easily without having to reflash.
It's open source.
Download:
You can download the installer from http://dl.xposed.info/latest.apk. The attached disabler zip is only needed if you are in a boot loop.
An experimental version for Gingerbread made by liudongmiao can be found here: http://forum.xda-developers.com/show...4#post44034334 (no support from my side though)
How to install:
First step for everything you do: Create a nandroid backup and make sure you know how to restore it!
I'm not responsible for anything you do with your phone/tablet/rice cooker.
There is also the risk to soft-brick your device. In such a case, restoring a backup is the easiest way to get rid of it (other possibilities mentioned below).
For the framework:
Download the Xposed Installer APK and install it
Launch the Xposed Installer, go to the "Framework" section and click on "Install/Update"
In case you get a Segmentation Fault error, please install this additional app (not needed if the installation worked fine).
Reboot
Done!
You can verify this by starting the Xposed Installer again. If app_process jumped back to an older version (or none at all), you probably have a ROM with S-On or similar, which reverts any changes to /system after a reboot. Use installation via recovery in such cases.
For any modules you want to install:
Download <module>.apk and install it
Launch the Xposed Installer and go to the "Modules" section (you will also get there if you click on the notification warning you that the module is not enabled yet)
Enable the module by checking the checkbox
Reboot
Done!
(note that you can install the framework and enable/disable multiple modules at once and reboot afterwards)
In case you get into a boot loop:
First, try using the safemode by pressing any hardware key repeatedly. You can find a short explanation how it works here.
If that doesn't work, you can flash the attached Xposed-Disabler-Recovery.zip by Tungstwenty. It will be copied to your (external) SD card when you install Xposed as well. The only thing it does is copying /system/bin/app_process.orig back to /system/bin/app_process, which you can also do yourself (e.g. with adb shell in recovery mode).
Modules:
The official repository for Xposed modules, which can also be access from within the app itself (with download/update support), can be found at http://repo.xposed.info
You can also have a look at this index: http://forum.xda-developers.com/show....php?t=2327541
Please don't use this thread for problems with modules! Use the thread of the module instead.
How to write a module:
If you are an interested developer, give it a try. The development tutorial will help you get started. Further documentation (e.g. how to replace resources) is here. And of course, you can ask your development questions in this thread.
If you have suggestions for new functions the framework could provide (which means they should be useful for more than your module), you can do this here as well. However, requests that I or somewhen else should write a module for xyz are NOT allowed here. Again, this thread is only about the framework.
Changelog:
1.0: Initial version
1.1: ???
1.2: Installer
1.5: Resource replacing
1.6: Some fixes and improvements [629 downloads]
2.0 rc2: Lots of thing redone. Supports (temporarily) replacing native libraries, lots of additions and changes for developers. [3,234 downloads]
2.0: Removed the native library replacement again, support for 4.1 and 4.2, Instagram crash fixed, ... [631 downloads]
2.0.1: Fixed a crash when a module tries to hook a function with "long" or "double" parameters [930 downloads]
2.0.2: Fixed a problem which resulted in a boot loop [4,310 downloads]
2.1: Various improvements, e.g. earlier callbacks for module loading. For details, see this post. [345 downloads]
2.1.1: Fixed a bug in drawable replacements [5,421 downloads]
2.1.2: Small fixes, added Chinese and Russian translations [11,415 downloads]
2.1.3: Reverted a change in 2.1.2 that caused bootloops; new translations and some more fixes [46,803 downloads]
2.1.4: Support for Galaxy S4 and HTC One plus a few minor fixes/enhancements (details) [208,176 downloads]
2.2: Builtin updater/module downloader, extended UI, support for Android 4.3 and more (details) [241,267 downloads]
2.3: x86, Knox, MIUI support (experimental), context menu in modules list and more (details) [18,219 downloads]
2.3.1: "Segmentation fault" during installation fixed [679,333 downloads]
2.4: Support for Android 4.4, performance improvements, log viewer, active check (details) [101,613 downloads]
2.4.1: Fixed bootloop on some x86 ROMs [2,537,642 downloads]
2.5: Rewritten installation, safemode, more compatibility (details) [821,792 downloads]
2.5.1: Compatibility with new CM11 nightlies and LG G2 theming engine
Source code:
https://github.com/rovo89/Xposed (the C++ part)
https://github.com/rovo89/XposedBridge (the Java part)
https://github.com/rovo89/XposedInstaller (Installer app)
Thanks to:
Tungstwenty for his many contributions, both in code and thoughts
XDA admins, news writers and supporters for making Xposed known to so many people
All those volunteers who help answering questions about Xposed
The people who donated to get me a Nexus 5 for earlier KitKat support
Translators:
[ar] Arabic: aljohanei
[az] Azerbaijani: hero355
[bg] Bulgarian: Stefan Stefanov
[ca] Catalan: Albert Samaniego, David Vaz Guijarro
[cs] Czech: Aleš Berka, Petr Reznícek
[de] German: rovo89, Nils Wasser
[el] Greek: Theodore Keloglou
[es] Spanish: David Vaz Guijarro
[fr] French: tonymanou
[gl] Galician: David Vaz Guijarro
[hu] Hungarian: Adam77Root
[id] Indonesian: AngSanley
[it] Italian: Vincenzo Cerminara
[iw] Hebrew: DubelBoom
[ja] Japanese: Noumi Ryoko
[ko] Korean: marbulas
[ms] Malay: Abe Atok
[nb] Norwegian Bokmål: rosaage
[nl] Dutch: Gert-Jan Anema, Leonard Simonse, Martin Coulon
[pl] Polish: czeci
[pt-rBR] Portuguese (Brazil): Marcio Andrade
[ro] Romanian: razorsbk
[ru] Russian: michfood
[sk] Slovak: pyler
[sr] Serbian: maleksa
[sv] Swedish: Fredrik Lundberg
[tr] Turkish: TheNorth34
[vi] Vietnamese: alienyd
[zh-rCN] Chinese (China): Cye3s, liveasx, Yeechan Lu
[zh-rTW] Chinese (Taiwan): Cye3s
THe guide is of @rovo89
so all credits goes to him
SImple just download the xposed framework.apk
install it like regular one..!
and then go to the "Framework" section and click on "Install/Update"
then select reboot and if ur phone gets rebooted and the home screen comes
then congrats u've successfully installed the xposed framework...!
if any case u get boot loop..! ! then just goto ur custom recovery(imp) and select install and select the disabler xposed .zip and flash it..! ur boot loop issue will be solved download this disabler xposed (IMP)and put it in ur sd/internal (anywhere) ( http://forum.xda-developers.com/attachment.php?attachmentid=2568891&d=1391958634)
PLEASE HIT THANKS PLEASE
oh really thank you but i mean was how can in change my status bar to some thing like samsung status bar ,, pls tell me this with step bye step
i now what is xpoosed,,i no how can i work with that but i do not now how can i work with xblash or another xpoosedapps to change my status bar and change that to some thing like samsung status bar !
so this is my problem ( choose what option on Xblast or another xpoosedapss to change my status bar to some thing like samsung status bar ! )
my Nokia s rooted, stock rom
now, who can show me how to change answer call screen, plz
Q&A for *TouchWiz Revolution* V7[4.2.2][UPDATE 23.8.2014]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
TouchWiz Revolution v7* Not installing
Greetings,
I have been trying to install Touchwiz sinc yesterday but i got no luck. I followed the steps correctly mentioned on http://forum.xda-developers.com/showthread.php?t=2698242
1) Firstly i installed recommended recovery
2) Wipe factory/data reset
3) Wipe Cache and dalvik cache
4) Install Touchwiz zip ROM
5) Again to recover
6) Wipe Cache
7) Wipe dalvik cache
When i turn on the device i got the stock ROM and touchwiz of Galaxy Grand Duos.
Please help.
Thanks!
Go to settings n check. Probably u have successfully installed touchwiz v7.
Where should i check in settings and what should i look for?
sagargulati said:
Where should i check in settings and what should i look for?
Click to expand...
Click to collapse
Refer this screenshot. U should see Touchwiz Revolution in Build number.
no their is nothing like that
Note 2 Gallery and other features.
Ok i was able to successfully install it.
But the problem i am facing now is that it doesn't show the theme and other things as mentioned in the TouchWiz Revolution 7.
Nor i have note 2 gallery and other things.
Please help!
sagargulati said:
no their is nothing like that
Click to expand...
Click to collapse
Then ROM didn't get installed. U have to give more details like. 1. How much time it took for flashing ROM. 2. What is the msg in recovery after flashing. etc.
Well it took like:
Finding update package...
Opening update package...
Installing update...
Time taken: 3:07 minutes
Install from sdcard complete.
Click to expand...
Click to collapse
I get Solo Launcher and that white S5 look in it but no gallery and other features mentioned in it.
Any help will be appreciated Thanks once again.
Or should i install TouchWiz Revolution v6 instead of v7?
Thanks!
No changes in TouchWiz Revolution v7
Greetings,
Since i am new i don't know much but telling about my experience and want to explorer it clearly.
I just flashed TouchWiz Revolution 7 but what all i got changes is the:
1) Notification bar
2) White S5 styled theme
3) Viper4AndroidFX
4) SuperSU
5) Torch
6) Solo Launcher with Perfect UI theme
7) Adaway
I didn't find any changes in the look regard when i use stock touch whiz in it.
Also i don't got any note 2 gallery or camera or Android L theme and style.
What could be wrong.
Prefer me to install any other version?
Please help!
Thanks!
If u have all these things then u have successfully installed the Touchwiz Revolution ROM. No doubt in that.
I see you posted this"It has some serious bugs and issues, I have tested it on specific more than two or three GT-i9082 devices."
I only installed it on one device and had no problems whatever.
The screenshot you see are from a previous build, If I remember corectly build 6
Did you also use TouchwizV7_Backup.zip as rahul8040 always provides the theme settings as mentioned?
Yes I used that too but all i get is nothing as off mentioned in the post. And If i try to install a mod using recovery like note 2 gallery or s5 camera. The ROM get a problem of SystemUI and moreover when i get into my settings > Sound > Ringtones. I found there is nothing changed i mean i have all my old ringtones predefined in it like before and nothing was changed in system.
need help!!!
the recovery on the first page wont install on my phone .
i'm using philztouch recovery but it wont install this rom.
@venom621 : try this method http://forum.xda-developers.com/galaxy-grand-duos/help/troubleshooting-gt-i9082-galaxy-grand-t2907256
Please raise the thanks button if it was helpful =)
This is touchwiz launcher or ROM?
And dual sim is working for grand duos ?
@abhigeek: It's a custom build ROM (modified with Stock ROM + other features) and yes it supports dual sim.
Hi Rahul,
Can u pls port the UPSM black & White mode, or do u have any info pls help
thanks for this
Touchwiz is the worst thing in Samsung it made Samsung the slowest android device