Hi mi a520f/ds is say on turn on only official released binaries are allowed to be flashed
of rest is all black, it does not have the logo of samsung
I was trying to install oreo 8.0 but at the time of flash bl and cp my phone did not start anymore.
I can enter download mode perfectly but any rom that install say fail.
Related
Help, i installed the twrp recovery and went about installing a rom but when i went to wipe the phone i wiped everything. So now when i try to boot into recovery it just shows the lg logo with the l.e.d cycling. No idea what to do please help.
Can you get into download mode, If so you can flash the stock .kdz for your device with the lg flash tool and you will a stock functioning phone agin. Then you can root and install TWRP again if you would like just like you did the first time. But make SURE that you use CORRECT kdz for your device model remove the batteries and under you should she something like this eith the X being numbers or letters: LG-XXXXX find the .kdz for the XXXXX value and flash it with the lg flash tool
Thanks alot, its working but its taking its time still only at 14%
Your welcome if you still need help just ask
G3 boots into firmware update only
I recently updated my lg G3 ( Google patch update named Aug-18-2015 etc) and it started to malfunction with resets, crashing and eventually got it stuck in boot loop. Then it booted into a green screen that said "demigod crash handler/tz crash" thrice. Instead of a hard reset I decided to using the lg mobile support tool to fix it. During the upgrade recovery my phone went into download mode/firmware update. I could see the progress bar moving and then get stuck and my mobile would switch off. Took out the battery, disconnected and reconnected the phone and tried the process all over again but in vain. I repeated this at least 8 times and eventually gave up. Now my phone is basically useless and only boots into firmware update. Hard reset doesn't work either. Can somebody please help me fix this?
Android version : 5.0
Kernel: 3.4.0
Firmware : v20t-ame-xx
Go to the site: http://lgg3root.com/lg-g3-root/how-to-unrootunbrick-lg-g3/ and search for your device and message me back if it works
red bleud led flash
after i installed twrp latest edition it won't boot into it and it gives me the red and blue led flash even trough the steps by suing the download mode it won't work
HELP PLEASE
Best regards
Exray_NL
Hi,
Well, this is my first post here, and I don't want to get out on the wrong foot, so advise me if I am going wrong somewhere.
Device info: SM - T110
Status: Stuck in bootloop.
Few days ago, I had rooted the tab. Things were smooth. Later, it asked me to update SU binaries. Ok. Then it switched off, and never switched on again. It only used to boot in download and recovery mode (CWM) . So I downloaded the official firmware and started to flash it. It started, only to get caught in a bootloop in the middle again.
So the update got stopped in middle.
The tab only even works if I connect it to a charger and shows a screen saying that my firmware update has gone wrong, connect to Kies. But my tab keeps switching on and off, not allowing time to connect.
Now how do I get out of the bootloop ?
P.S : I cannot get into either download or recovery mode. ( That's why I started a new thread)
Hopefully someone can help me its for X800 china version
I tried to open the phone after 2 years, and tried to update it with official ROM from http://123.59.123.195/cn/download/phone/30
After updating, when I tried to reboot it, it got stuck on this black screen with a small penguin, and then after few seconds, it restarts back with the same black screen and the penguin.
I can still access TWRP recovery if I press the vol up button while it is restarting. I tried installing different custom ROM, but to no avail. I would really appreciate if you can help me fix my phone
EDIT: RESOLVED
It was looping on fastboot mode (the penguin icon)
Tried installing an older version, lollipop based, from Cuoco92 (from here https://androidfilehost.com/?w=files&flid=57901) and it worked again (thanks Cuoco92!)
Upon reading online, it seems the partition may have been corrupted since I'm trying to flash a MM ROM from a lollipop ROM ,without updating the firmware
I found out that I need to update the firmware to 16S, which I downloaded from this thread: https://forum.xda-developers.com/le...ollipop-marshmallow-firmware-x800-cn-t3463736
(thanks hugoprh!)
After that I am able to install any ROM, from MM and up (was able to install Lineage OS 14.1)
lancelotconquista said:
Hopefully someone can help me its for X800 china version
I tried to open the phone after 2 years, and tried to update it with official ROM from http://123.59.123.195/cn/download/phone/30
After updating, when I tried to reboot it, it got stuck on this black screen with a small penguin, and then after few seconds, it restarts back with the same black screen and the penguin.
I can still access TWRP recovery if I press the vol up button while it is restarting. I tried installing different custom ROM, but to no avail. I would really appreciate if you can help me fix my phone
EDIT: RESOLVED
It was looping on fastboot mode (the penguin icon)
Tried installing an older version, lollipop based, from Cuoco92 (from here https://androidfilehost.com/?w=files&flid=57901) and it worked again (thanks Cuoco92!)
Upon reading online, it seems the partition may have been corrupted since I'm trying to flash a MM ROM from a lollipop ROM ,without updating the firmware
I found out that I need to update the firmware to 16S, which I downloaded from this thread: https://forum.xda-developers.com/le...ollipop-marshmallow-firmware-x800-cn-t3463736
(thanks hugoprh!)
After that I am able to install any ROM, from MM and up (was able to install Lineage OS 14.1)
Click to expand...
Click to collapse
sir can you help me with it my Le Max is showing penguin and then black screen i cant able to access twrp please help me
Hi ! Please if someone can help me
I have buy a Redmi note 5 3/32 global version with red packaging write global version not open model M1803E7SC.
The phone start on Miui 9 Android 8 I have configure it with restore Google and mi cloud App's no Mistake work fine.
After I have an update for install Miui 10 Android 8 I make it no mistake too all work fine. I use it one day great phone I like it my child very happy.
But I receive a new update for Android 9 Pie Miui 10.
I make it and the phone restart and configure it and want restore App's again but the phone crash no button work frozen screen ? I shout down but stay on mi logo with Android on the back. I stay 1 hours nothing ?
The phone are new no BL unlock nothing only Ota update.
I restart it on Recovery stock 3.0 and wipe data the phone restart and stay again on mi logo and Android on the back and small research points ? I leave it all the night and no more battery shout down.
I have again acces to stock Recovery and fastoot but the phone are lock BL can't use sideload etc... I use mi pc suite assistant chinese version 3.0 for use mi assistant. I flash again the firmware download on mi.com with quick flash that work but when restart stay on mi logo ? After flash 3 times with mi assistant the phone now stay on mi logo but not Android in the back ?
I don't understand why a new phone with only ota update can't work fine ? I don't know why do now ? My child are very sad me too..
Please if someone can help me ?
Cordialy
I think your must to do from testpoint and re-flash MIUI from miflash.
Good luck, mate! Greetings to your child.
Hello dear, i have a problem with a Samsung a7 2018 from my friend..so i explane the problem..the phone doesnt work with any sim card..my friend give a mobile to a Person that i do know WTF do block the phone and appears a Red write on boot where Say that smartphone Will not work without originale firmare..so i try to repair with Odin..i flash thousan of Rom Italian on the beginning all still working but not the Sim..It recognize inside but i can select the network so i can only make emergency call..i try to flash with different rom with custom rom with twrp but nothing Always the same problem..i try different rom all firmware flash correct with Odin but now i face a new problem..when i flash with all firmware i use It flash correctly i can go in download mode rescue mode but i cant procede with smartphone configuration..Is still Always lock on Samsung logo..and stay like this for ever..any help for fix It please? The latest rom installed Is android 10 firmware itv..model Is sm-750fn..if i go to download mode It happears avoid waranty 1 and carrier_id omn..now i cant install in any Way twrp again..Always file and Say that only original bootloader Will work