ADB unable to find my Find7 - but Fastboot works - Oppo Find 7 and 7a

New to XDA, so hopefully this is in the right place!
My problem
I tried to install a new ROM and it's gone badly wrong. First, I couldn't get the recovery bootloader to launch or to re-install. Then suddenly ADB wasn't working any more, and I was unable to boot up into the system.
Now I get boot loops with the Oppo logo. If I hold down volume up + power, I have access to Fastboot. I can use my Mac to send commands with Fastboot, but I cannot get ADB to find my device. Typing Fastboot getvar all gives me 'All: ' in response, which is not a good sign.
Attempted solutions
I've tried installing TWP and CWM, but both of them just end up booting to a black screen. At one point I tried to flash stock Oppo recovery and got a black and white flickering recovery screen for my trouble, which was unresponsive..so I wiped it and started over. I suspect it was not the correct recovery file, as I really struggle to find what are definitely the correct files now the OppoStyle Forums where I used to download recovery files no longer seem to be active.
After two days of reading various threads and trying solutions, I am really out of ideas now. So any help would be greatly appreciated!
Before embarking on this journey I cleared my phone of anything important, made sure it was rooted and enabled USB debugging. I also wipe everything from Fastboot whenever attempting any fresh flashes.
More context
I've had problems with my Find7 ever since I tried to unify my storage a couple of years back. In the end, I got unified storage to work but on a very old version of ColorOS. I had a lot of problems getting to that point, so from then I decided to just live with the outdated OS. But finally, the frustration of apps not being compatible got to me a few days ago and so I decided to try and install a new ROM. That's when my recent troubles began! I think legacy issues from my initial problems years ago may have contributed to the mess my phone is in now.
So what next?
Ideally, I'd love to get my Find7 completely wiped clean and a modern, stable ROM with unified storage working on it. But at this point, I'd settle for original ColorOS with non-unified storage again if I had to!
Hoping someone here has some suggestions I can try! Can't get worse surely

Related

Stuck in a boot-loop

Hello everyone!
First of all, I would like to apologize, as these kind of issues have probably been talked about and solved a gazillion of times before, but the thing is, I'm having a hard time grasping the start and the end of this issue myself, as the phone that is stuck in a boot-loop isn't mine - it belongs to a friend of mine who somehow managed to get the whole thing bricked.
Anyhow, I'll start off with what I know;
His goal was to flash a new ROM (http://forum.xda-developers.com/showthread.php?t=1601543). He unlocked the bootloader and rooted the phone using these instructions; http://onexroot.com/one-x-root/how-to-root-one-x/). He succeeded in doing so and decided to move onto flashing the rom.
But the problems started when he read that he's first supposed to flash "Android Fastboot kit 2.1" onto the device, prior to flashing the device. And so he did. Or well, tried - what he told me was that he booted the phone into fastboot mode, then ran the "Install Boot.img" bat file inside the Fastboot Kit folder he downloaded and after that, the phone got bricked.
Now, my knowledge in this area isn't too great either, but I've flashed a few ROMs in my life before, so, I decided I'd do my best to help. But I have no clue on what steps he should take from here on.
To my understanding, he was running the official 1.29 version and he is still able to access the boot-loader as well as Clockwork Recovery mod. To my understanding, he didn't create a back-up of his previously working ROM and the phone won't show up in Windows Explorer while connected via USB either.
To my limited understanding, I should now try and install the rom onto his phone and once done, the whole thing should work - the only problem with that is the fact I can't get the ROM zip onto the SD Card right now, as explorer won't recognize it. So far, I tried using ADB to push the ROM file onto the phone, but every time I use the command "adb shell mount /sdcard" I get a "Device not foound" error. So, I'm kinda stuck here right now. If this even is the right way to solve the issue, that is.
So, like I said, I'm having a hard time grasping the start and the end of this issue myself, and if there is any additional information needed, I'll do my best to find out more about it - I do have the phone in my possession at the moment as well.
Thanks a lot to anyone who'll offer any kind of help!
Atraeh said:
Hello everyone!
First of all, I would like to apologize, as these kind of issues have probably been talked about and solved a gazillion of times before, but the thing is, I'm having a hard time grasping the start and the end of this issue myself, as the phone that is stuck in a boot-loop isn't mine - it belongs to a friend of mine who somehow managed to get the whole thing bricked.
Anyhow, I'll start off with what I know;
His goal was to flash a new ROM (http://forum.xda-developers.com/showthread.php?t=1601543). He unlocked the bootloader and rooted the phone using these instructions; http://onexroot.com/one-x-root/how-to-root-one-x/). He succeeded in doing so and decided to move onto flashing the rom.
But the problems started when he read that he's first supposed to flash "Android Fastboot kit 2.1" onto the device, prior to flashing the device. And so he did. Or well, tried - what he told me was that he booted the phone into fastboot mode, then ran the "Install Boot.img" bat file inside the Fastboot Kit folder he downloaded and after that, the phone got bricked.
Now, my knowledge in this area isn't too great either, but I've flashed a few ROMs in my life before, so, I decided I'd do my best to help. But I have no clue on what steps he should take from here on.
To my understanding, he was running the official 1.29 version and he is still able to access the boot-loader as well as Clockwork Recovery mod. To my understanding, he didn't create a back-up of his previously working ROM and the phone won't show up in Windows Explorer while connected via USB either.
To my limited understanding, I should now try and install the rom onto his phone and once done, the whole thing should work - the only problem with that is the fact I can't get the ROM zip onto the SD Card right now, as explorer won't recognize it. So far, I tried using ADB to push the ROM file onto the phone, but every time I use the command "adb shell mount /sdcard" I get a "Device not foound" error. So, I'm kinda stuck here right now. If this even is the right way to solve the issue, that is.
So, like I said, I'm having a hard time grasping the start and the end of this issue myself, and if there is any additional information needed, I'll do my best to find out more about it - I do have the phone in my possession at the moment as well.
Thanks a lot to anyone who'll offer any kind of help!
Click to expand...
Click to collapse
The latest Clockwork jobby will allow you to mount the sdcard as USB drive.
Other than that, you seem to be on the right track.
^ he's right
What you want to do is first download the 5.8.4.0 version of the endeavoru CWM recovery.
reboot to your bootloader, make sure you're in fastboot and flash the new recovery img.
After you have successfully flashed the new recovery, well... go to the recovery
On the recovery, tap mounts and storage, then tap Mount USB. VOILA!!!!!
Yeah, I forgot to mention that I've already tried mounting the SD Card via Clockwork Recovery - I get an error saying "Unable to open ums lunfile (No such file or directory exists). So that doesn't seem to be an option either, unless you have an idea on how to counter this?
EDIT: Ah, I see - he's using an older version. I'll get the latest one on board and give it a go. Will have to wait a bit for the phone to charge up first it seems though. Not enough battery to do it right now .
Thanks!
And voila! The phone is operational.
Thanks a lot for the help and, I just hope I never manage to half-brick my own HOX .

[UNBRICK] Getting into recovery/unbricking V410

I'm posting this just because it might be helpful for others, as well as providing some warning for anyone else who might one day get into the same situation.
I was rooted and had installed TWRP on my new Gpad 7.0 V410 and everything was running just fine. I've been modding Android devices for years and thought I knew what I was doing. I didn't like the AT&T boot animation and thought I'd replace it. I found the stock animation in system/media, and replaced it (with a Nexus 7 ani) just like I'd done on previous devices.
When I rebooted, the animation started and ran. But then it hung, and rebooted. It was now stuck in a bootloop. Well, no problem, I thought, I'll just get back into recovery and restore the stock ani.
That was when I discovered how locked down the firmware is on this device. No fastboot. No standard Android bootloader. Not even, as far as I could tell, anyway of rebooting into recovery using the hardware buttons.
I could get to the factory reset screen and download mode, but neither have any way to get to recovery. ADB could not connect. The LG support tool found it, but did nothing but tell me the firmware was up to date. Lots of searching and reading turned up similar tales of woe. I began to worry that there was no way out.
Having no other ideas, I tried doing a factory reset. It ran, and lo and behold, kicked me into TWRP. From here, I confirmed that the device was wiped.
However! I had had the foresight to create a TWRP backup on my external sdcard, and that was still there. Restoring it got everything back in working order.
The moral: If you're up and running now, make an external backup. It could save your butt just as it did mine.
Amen
I'd just like to add that you can enable fastboot on this tablet for anyone who might read this thread. If you follow the method described here you'll lose download mode, but the tablet will fall back to fastboot when download mode fails. :good:
Without a kdz file released for the V410 the download mode isn't really good for anything, but fastboot gives you a fighting chance of being able to flash your way out of trouble if you brick your V410. Probably advisable to keep a backup of the laf partition just in case you need it someday.
Aha, thanks, I had seen that referenced several times, but wasn't sure where to go with it, and wanted to try less extreme methods before attempting something like that.
I've been spoiled by modding HTC and Nexus devices up to now, so this is a bit of a culture shock over here.
Edit: Decided to bite the bullet in case of future problems and nuked laf. Ah, sweet fastboot. :highfive:

LG G4 boot loop into TWRP

Hello everyone,
yesterday I flashed a new Cyanogenmod 14 nightly (12062016) for my G4 from earlier nightly in TWRP. After reboot the phone keeps going back to TWRP and I can't seem to get it to boot to system..
I tried factory reset, reflashing back to old nightly, flashing stock.. but nothing seems to work.
Also tried doing this in the TWRP terminal:
dd[space]if=/dev/zero[space]of=/dev/block/platform/f9824900.sdhci/by-name/fota
Didn't fix the loop, I guess because it wasn't the OTA update that caused the problem in the first place.
If anyone has an idea, I would greatly appreciate the help!
Thanks.
If you can reach download mode you could try reflashing back to stock then starting again.....Hope you get yours fixed - Sorry to say this but mine did a very similar thing only 24 hours before you posted!!! Only mine was on stock FW and was in use at the time - I've now had to swap it as valuebasket who sold me the phone have ceased trading. If yours is a UK model you may be able to get it replaced under warranty - believe that LG guarantee their phones for 2 years and a ruling by the European court said that flashing a custom rom doesn't invalidate any warranties.
I have the same exact issue, I also flashed the latest CM14 nightly and cannot get the device to boot any rom.
I have even tried flashing stock rom but I get the same problem.
From what I have read, the bootloop issue happens once the device boots but I don't seem to be getting that far.
Any ideas?
Ran into the same problem 3 days ago. This is the first time I have encountered a non-revertible issue in 3 years as a cyanogenmod user. This changes my opinion on how safe it is to make use of a custom ROM. I tried to wipe everything, reinstall TWRP, change TWRP with another recovery, reinstall a safe NAND backup of mine.....nothing.....it went into boot loop. Before I read this post, I was convinced my phone encountered the infamous G4 bootloop problem.....now I see there are other examples, so it shouldn't be the case. Long story short, I had to check my device in at the LG assistance, with 25 days as time forecast.
The guilty nightly was 20161205.
I have never seen anything like this...
This has solved it for me - I installed LG Bridge and flashed the factory firmware using the tool. Now it seems I'm back on stock but at least it's working.
got mine working. I had to install LGUP and flash stock ROM. Once flashed I installed CM14 and I am back up and running again.
I tried LGUP but it could not recognize the device while this was looping.....a bad experience......
I have the same issue. My phone was updated to 20i via the original stock firmware, then I put twrp 3.0.2-0 and cyanogenmod on. I did a cyanogenmod update from within cyanogenmod, which just booted into twrp, then I manually installed the update zip that cyanogenmod had downloaded, then it always boots into twrp. I wonder if initiating the update from within cyanogenmod was the cause. The phone is not detected by LGUP or LG Bridge. I've tried this on a win10 machine, and a win7 vm from linux. I have access to twrp, and download mode by doing the reboot into bootloader from within twrp.
If those people who have fixed this could give more details about how they did it, that would be good. What exact steps did you take? What stock firmware version did you have before installing a custom rom? What OS version were you using? What twrp version?
Well. Mine got stuck in bootloop for the second time today. What is going on? In between the two bootloops I had one good update with CM. Using TWRP 3.0.2.1. Steps to reproduce failure: updating CM from within CM, it autoreboots into TWRP and after that nothing happends, no autoinstall. Then after a manual install of the new CM the bootloop starts.
Resolve the problem:
* Install LGUP 8994 DLL Ver 0 0 3 23, Install LGUP Install Ver 1 14, get the latest KDZ
* Get the phone into download mode with usb cable and after that in firmware update mode
* Startup LGUP and choose refurbish and select the kdz file.
* After that you can boot into your stock LG firmware again, reinstall TWRP an CM. If you want so.
Read that it is advised to manual update cm from within TWRP. TWRP will get an update in the future to solve this bootloop problem.
iankelling said:
I have the same issue. My phone was updated to 20i via the original stock firmware, then I put twrp 3.0.2-0 and cyanogenmod on. After a cyanogenmod update, it always boots into twrp. The phone is not detected by LGUP or LG Bridge. I've tried this on a win10 machine, and a win7 vm from linux. I have access to twrp, and download mode by doing the reboot into bootloader from within twrp.
If those people who have fixed this could give more details about how they did it, that would be good. What exact steps did you take? What stock firmware version did you have before installing a custom rom? What OS version were you using? What twrp version?
Click to expand...
Click to collapse
I second that. Same issue and neither LG Up nor LG Bridge will recognize my device. Looking in device manager there are no serial interfaces. Do I need a special driver that provides a com port for a phone in recovery or fastboot mode?
---Edith 2016-12-12: Found a solution for my issue:
The phone has to be in _download_ mode, not in recovery or fastboot. After realizing that I have to boot the phone in a different manner, it will be recognized by LG UP.
Here is how to boot the pone in download-mode:
- Power off your LG device.
- Press and hold Volume Up button.
- Connect your device to PC with a USB cable while holding the Volume Up button.
- You’ll boot into download mode with “Firmware Update” written on top of the screen.
Now everything is fine again.
croclacrimae said:
Hello everyone,
yesterday I flashed a new Cyanogenmod 14 nightly (12062016) for my G4 from earlier nightly in TWRP. After reboot the phone keeps going back to TWRP and I can't seem to get it to boot to system..
I tried factory reset, reflashing back to old nightly, flashing stock.. but nothing seems to work.
Also tried doing this in the TWRP terminal:
dd[space]if=/dev/zero[space]of=/dev/block/platform/f9824900.sdhci/by-name/fota
Didn't fix the loop, I guess because it wasn't the OTA update that caused the problem in the first place.
If anyone has an idea, I would greatly appreciate the help!
Thanks.
Click to expand...
Click to collapse
I was able to get out of that by also wiping by-name/misc. Don't do that, though, because then your wifi mac address will get messed up and you'll spend all day looking for a permanent fix for that.
I suggest reflashing a stock KDZ using LGUP, as others have said. You can get the usb drivers from LG Bridge.
I will release a fix for that soon. Check the twrp thread for updates on this.
Hi
I also have this problem
I installed cm-14.1-20161201-NIGHTLY-h815 successfully and was running it for almost 2 weeks without issues, today I updated to cm-14.1-20161213-NIGHTLY-h815 from cmupdater and I have been ending up in recovery every time I rebooted.
I tried flashing the latest cm recovery and reflashing the rom, with full wipes but no luck.
Full steps of recovering would be appreciated (for example, there are comments about flashing the latest stock rom, but a link to this rom would be helpful)
Thanks
Good news regarding this:
http://forum.xda-developers.com/showpost.php?p=70082901&postcount=213
The above will fix TWRP bootloop issues as well and I also released a first h811 version which should allow installing CM etc as it should.
Keep in mind that this is a BETA and not an official TWRP release.
Please report back in the above thread!
.
Does your twrp beta really fix the boot loop even it is already happening. What do I have to wipe? I have not managed to get out of the boot loop despite intalling it.
Is using using LG Up to flash to the stock rom really the only option?
Edited 2017-01-25 2:45 pm:
Well, sometimes you just have to be patient. Powered down the phone and when th H815 restarted CM did boot. Great. :good:
Hey, I just want to share a small detail, possibly a fluke that helped me overcome the bootloop.
So...I started with a fresh, stock H815, I don't quite remember the firmware version..it was something like version "20g"..
OK, I looked up several guides and tried to get the newest stable versions of each tool. I went through with the official bootloader unlock, then moved on to rooting: Kingroot didn't work for me so I went on installing twrp in fastboot mode so I could afterwards install supersu and root.
I got there eventually but first I was stuck in bootloop - kept ending up in twrp interface. I found the 2 dd commands but those didn't work for me as the msm_sdcc folder did not exist, but instead there was a "f9824900.sdhci". Tried to overwrite this one ...but as others have stated as well, it didn't work.
At that point, I had nothing to lose, I was starting to accept that I had soft-bricked my precious G4 so..I went on installing the DU 10.6 7.1.1 rom and the stock gapps, wiped dalvik, rebooted and held my breath...not literally
About 12 minutes later, after an endless red, spinning logo, my shiny ping pong paddle showed me a different screen, a fresh start welcome screen .
Almost 24h / 10-12 reboots (twrp included) / 70+ apps installed and removed later, the new OS holds around 2G ram average, a bit better battery life, smoother transitions, flawless navigation, flush streaming over both 3G/LTE & 2.4/5 G wifi.
FYI the reboots were intended, wanted to see consistency in boots - we're in the green . Now testing long term stability with moderate/high usage.
There is 1 aspect I noticed, there are a couple of contexts when the interface burps (several menus, various situations, never in apps) and resets back to homescreen...but I think that's more of a launcher topic than an OS one.
Other than that, so far I'm happy with the mod.
Hope my experience helps others that might be in the same spot I was or at lest boosts their confidence to try out a decent idea they might be pondering.

Robin stuck on "Nextbit splash" screen and does not get recognized by PC

So my phone has been this way since Nov 2017, there are files that I need access to and would truly appreciate some guidance
I was experiencing issues with the bluetooth on nextbit previously so I installed a new rom after flashing the device. Once the rom also gave issues I decided to revert back to the Nextbit 7 OS and one fine day when the phone restarted it wouldnt go past the "nextbit" splash screen. Tried installing the OS again however the PC wouldnt recognize the phone anymore, switched laptop to a Mac and got the same issue
Any help would be greatly appreciated
It wont let me post a URL link. I have taken www out hopefully it allows to view the video, shows exactly whats wrong
youtube.com/watch?v=ImIk5CErWf0
It looks there's something wrong with the system boot, since it's reaching the blue boot-animation and it stays there (probably before loading the adb stuff). Fortunately u did unlock the bootloader and that annoying initial screen may be helpful this time, did u try to reach recovery or fastboot mode from there (pressing some volume key)? It's pretty hard for it to be broken there too and in such a case I would think about some hardware fault. Anyway from the recovery (I hope u have TWRP, if not install it with fastboot) you should be able to do whatever u want, including recovering your files or (re)installing a rom

Problem flashing recovery and lineage; twrp touch notworking

Hey people since long time i am loving your base helped me alot for many years with my different projects but now i am really stuck i cant progress any futher, i am quite frustrated.
I flashed the twrp different versions i think all official ones plus one i found somewhere here but it all the time has the same problem of a non working touchscreen. I know that with this kind of adapter USBC to USB and a mouse it should work but i dont have one and I live quite remote.... so it would be nice if it works without.
So what i tried is to boot into recovery and open a but the "set_active b" that was suggested also but i am not sure if i found it with the chiron but rather with the a1 one or something with same problem touchscreen not working. adb shell twrp wipe cache dalvik system data and then adb sideload but when i am trying to flash the lineage it finishes with the success message i found somewhere in a thread here but its way to fast it needs like 0.2 seconds and of course it isnt working. also i tried to fastboot flash the lineage recovery but everytime i am ending up in twrp in the end so it doesnt get replaced also if fastboot reboot recovery afterwards or fastboot boot lineagerecovery. I just dont know anymore also i tried to update to new adb and fastboot but didnt work. Also i tried fastboot -w before doing everything it cleaned the encryption password so twrp looked different afterwards but after repeating the steps still the same result no lineage
I was really excited about this phone but now it got really the hardest phone to flash of all the five I ever tried
Help would be highly appreciated.

Categories

Resources