hello, my mi6 suddenly dead, hard brick, can't enter to fastboot mode. Mi6 6/128 ceramic edition.
so i decided to open back covers and shortlink 2 pins it detect as qualcomm loader in mi flash, but when flashing fastboot rom it always show error " set boot partition 1 failed "
i tried many version of mi flash and use global stable, global dev, china stable, china dev fastboot rom but always ended in set boot partition failed..
i've searching lots of forum but can't found an answer for set boot partition failed error.
i also tried QPST for flashing with fastboot rom but also give error,
please help anyone have same problem with me? or any xiaomi engineer here? i just need how to solve flashing in mi flash with error set boot partition failed.
i hope no need to change/replace the hardware...
You can try to use XiaomiTool and flash your phone with instead.
https://www.xiaomitool.com/V2/
Also, have you tried fastboot boot recovery.img
To see if you can boot TWRP or something?
(fastboot boot might work better than flashing)
I don't have any experience with Miflash, so can't offer any advice on that.
Personally I would try fastboot boot first, since XiaomiTool is in alfa-version.
-Zteam- said:
You can try to use XiaomiTool and flash your phone with instead.
https://www.xiaomitool.com/V2/
Also, have you tried fastboot boot recovery.img
To see if you can boot TWRP or something?
(fastboot boot might work better than flashing)
I don't have any experience with Miflash, so can't offer any advice on that.
Personally I would try fastboot boot first, since XiaomiTool is in alfa-version.
Click to expand...
Click to collapse
thanks for replying.. my phone is dead can't boot to fastboot. only detect in edl mode. i think its problem with my partition being messed up (look from mi flash logs)
anyway i have tried to install xiaomitool v2 but i think it's not compatible yet with unbrick device it show error like this:
zilan said:
thanks for replying.. my phone is dead can't boot to fastboot. only detect in edl mode. i think its problem with my partition being messed up (look from mi flash logs)
anyway i have tried to install xiaomitool v2 but i think it's not compatible yet with unbrick device it show error like this:
Click to expand...
Click to collapse
it seems your Mi6 is alive again how was the solution?
DJ Regino said:
it seems your Mi6 is alive again how was the solution?
Click to expand...
Click to collapse
no , still dead.. :crying:
look into https://stackoverflow.com/questions/39906951/android-edl-mode-commands
zilan said:
thanks for replying.. my phone is dead can't boot to fastboot. only detect in edl mode. i think its problem with my partition being messed up (look from mi flash logs)
anyway i have tried to install xiaomitool v2 but i think it's not compatible yet with unbrick device it show error like this:
Click to expand...
Click to collapse
Sorry for my late reply, I had forgotten to answer this earlier, did you try to perform a regular flash (not bricked option) from XiaomiTool. if that doesn't work either, maybe you should ask the developer of XiaomiTool2 for hints.
Try mipcsuite chiese version, i saved my Mi6 when it showed penguin in the middle of screen, no fastboot nor recovery etc
HTCDevil said:
Try mipcsuite chiese version, i saved my Mi6 when it showed penguin in the middle of screen, no fastboot nor recovery etc
Click to expand...
Click to collapse
do you have a link? and what rom to use?
zilan said:
do you have a link? and what rom to use?
Click to expand...
Click to collapse
Is there any update? Did your phone recovered from that situation?
I am in the same situation with my Asus Rog 2. It has life sign only in edl mode and when I try to recover I ve got that error too "set boot partition failed" still dead.
zenhex said:
I am in the same situation with my Asus Rog 2. It has life sign only in edl mode and when I try to recover I ve got that error too "set boot partition failed" still dead.
Click to expand...
Click to collapse
u fix it?
zilan said:
hello, my mi6 suddenly dead, hard brick, can't enter to fastboot mode. Mi6 6/128 ceramic edition.
so i decided to open back covers and shortlink 2 pins it detect as qualcomm loader in mi flash, but when flashing fastboot rom it always show error " set boot partition 1 failed "
i tried many version of mi flash and use global stable, global dev, china stable, china dev fastboot rom but always ended in set boot partition failed..
i've searching lots of forum but can't found an answer for set boot partition failed error.
i also tried QPST for flashing with fastboot rom but also give error,
please help anyone have same problem with me? or any xiaomi engineer here? i just need how to solve flashing in mi flash with error set boot partition failed.
i hope no need to change/replace the hardware...
Click to expand...
Click to collapse
if you're still there, i resolve this issue.
you need to jump charge your battery using external charger ( external charger jumped wire direct on your battery). maybe for 30mins.
then try again to charge your phone, if it reapond and have display 0% battery, let it charge for atleast 50% then power ON.
If it stucks on logo.. do reflash.
Hello there, need help here.
I have a Redmi 5a variant MCG3B with locked bootloader. I've been trying to reflash this thing back up through EDL mode, but it just won't boot pass MI logo. It flashed successfully without any hiccups. When I tried to boot it up, it just showed MI logo and then blank black screen, nothing. Tried latest and older MIUI Global fastboot ROM, still the same.
It can still get into fastboot, but since bootloader is still locked, I can't do anything from there. Or can I?
Been trying to google things up but so far nothing. Anyone have any solution? Thanks before.
PS. Btw, sorry for the typo in the thread's title. I mean 'even'
b4b4.4l1 said:
Hello there, need help here.
I have a Redmi 5a variant MCG3B with locked bootloader. I've been trying to reflash this thing back up through EDL mode, but it just won't boot pass MI logo. It flashed successfully without any hiccups. When I tried to boot it up, it just showed MI logo and then blank black screen, nothing. Tried latest and older MIUI Global fastboot ROM, still the same.
It can still get into fastboot, but since bootloader is still locked, I can't do anything from there. Or can I?
Been trying to google things up but so far nothing. Anyone have any solution? Thanks before.
PS. Btw, sorry for the typo in the thread's title. I mean 'even'
Click to expand...
Click to collapse
Try using MiFlashTool
And flash with global rom not recovery rom
Sent from my riva using XDA Labs
Hello, Guys.
Please help me I am stuck in this situation, for now, the phone suddenly stuck and after restarting it now it's on MI logo and the sick thing is that it's with a locked bootloader.
Tried the EDL method with various MI flash version and flashing this file "whyred_global_images_V11.0.3.0.PEIMIXM_20191108.0000.00_9.0_global_f128798d03"
With some MI Flash tools, it's getting ACK error with some did not find programmer file and for some other common error too.
There was this 20161222 MI Flash version with this it flashed the whole file with success but still not booting after MI logo.
I think the Motherboard of this device just died or please if there is any solution with anybody to help me. :crying:
Thank you
hello, i need help with my mi a2 lite 4/64 ... i installed a custom rom miui and it was very good, until while i played pubg mobile my phone crashed .. it was a while with the screen locked in the game and then restarted, but now does not want to start, I've tried miflash, fastboot, recovery does not load (the options) I really need help because I have no work and no money to buy another, who can help me ...:crying: :crying: :crying: :crying:
sorry my bad english..... :crying:
can u go to fastboot ? if yes type: fastboot oem edl then miflash - refresh, then flash 10.....13 full fastboot ver.
gumka77 said:
can u go to fastboot ? if yes type: fastboot oem edl then miflash - refresh, then flash 10.....13 full fastboot ver.
Click to expand...
Click to collapse
which version of miflash recommends me? because none installs, and still stuck with the custom rom boot animation
Hi, I have an issue I have bricked my a2 lite and now is in permanent EDL mode. I cant go to Fastboot and the display is black. Only when I connect the battery do I have the LED flashing and then stops. I can hear the Windows sound when I connect the cable with my laptop. I tried flashing with Miflash nut it keeps on "flashing" process all the time and just counts. Yesterday I left it there for over 5h and still going
Anyone can help? I guess I have flashed the wrong firmware. And I cant seems to find a new one that works.
My Xiaomi Mi A3 (laurel_sprout) was stuck in fastboot mode, miflash didnt worked and i wasnt able to boot a recovery. I thought my device was dead but after I found this tutorial and now my device´s alive again. I hope that works for you if you have the same problem as me.
Gaalpos said:
My Xiaomi Mi A3 (laurel_sprout) was stuck in fastboot mode, miflash didnt worked and i wasnt able to boot a recovery. I thought my device was dead but after I found this tutorial and now my device´s alive again. I hope that works for you if you have the same problem as me.
Click to expand...
Click to collapse
errr how you do that? im stuck at fastboot after try update. it said "the system has destory"hold power button to restart.
To use miflash you have to enter in edl mode. I think you dont have do that